Y10T24/00	7	Buckles, buttons, clasps, etc.	CPCONLY	Y10T24/00		2
Y10T24/10	8	Miscellaneous	CPCONLY	Y10T24/10		304
Y10T24/11	8	Album fasteners	CPCONLY	Y10T24/11		111
Y10T24/12	8	Gun band type	CPCONLY	Y10T24/12		45
Y10T24/13	8	Article holder attachable to apparel or body	CPCONLY	Y10T24/13		379
Y10T24/1303	9	Chatelaine safety hooks	CPCONLY	Y10T24/1303		53
Y10T24/1306	9	Flower	CPCONLY	Y10T24/1306		160
Y10T24/1309	10	Pin attached	CPCONLY	Y10T24/1309		210
Y10T24/1312	9	Napkin	CPCONLY	Y10T24/1312		120
Y10T24/1315	10	Hook	CPCONLY	Y10T24/1315		53
Y10T24/1318	10	Neck enclosing	CPCONLY	Y10T24/1318		79
Y10T24/1321	9	Pencil	CPCONLY	Y10T24/1321		297
Y10T24/1324	10	Clasp attached	CPCONLY	Y10T24/1324		255
Y10T24/1326	11	Finger ear, belt attached pencil holder	CPCONLY	Y10T24/1326		7
Y10T24/1329	11	Pencil holder with paper clip	CPCONLY	Y10T24/1329		20
Y10T24/1332	11	Combined and convertible pencil holder	CPCONLY	Y10T24/1332		100
Y10T24/1335	11	Container type pencil holder	CPCONLY	Y10T24/1335		172
Y10T24/1338	11	Separate pencil holder and pocket engaging clip	CPCONLY	Y10T24/1338		27
Y10T24/1341	11	Sliding jaw pencil holding clip	CPCONLY	Y10T24/1341		16
Y10T24/1344	11	Wire pencil holder	CPCONLY	Y10T24/1344		58
Y10T24/1347	11	Flexible shank pencil holder	CPCONLY	Y10T24/1347		278
Y10T24/135	11	with movable catch [e.g., pin pivoted lever, roller, etc.]	CPCONLY	Y10T24/135		89
Y10T24/1353	11	Pivoted jaw pencil holder	CPCONLY	Y10T24/1353		159
Y10T24/1356	10	Pin attached	CPCONLY	Y10T24/1356		164
Y10T24/1359	10	Rule holder	CPCONLY	Y10T24/1359		77
Y10T24/1362	9	Sleeve holder [e.g., for inner coat]	CPCONLY	Y10T24/1362		61
Y10T24/1365	9	Pin attached	CPCONLY	Y10T24/1365		218
Y10T24/1368	9	Arm or leg carried holder	CPCONLY	Y10T24/1368		126
Y10T24/1371	9	Eyeglass holder including retaining means	CPCONLY	Y10T24/1371		241
Y10T24/1374	9	Neck supported holder	CPCONLY	Y10T24/1374		83
Y10T24/1376	9	Holder contains pocket engager [e.g., antitheft device, wallet protector]	CPCONLY	Y10T24/1376		226
Y10T24/1379	9	Key ring holder	CPCONLY	Y10T24/1379		339
Y10T24/1382	9	Receptacle type holder	CPCONLY	Y10T24/1382		170
Y10T24/1385	10	Eyeglass or spectacle case	CPCONLY	Y10T24/1385		68
Y10T24/1388	9	Open-ended holster type holder	CPCONLY	Y10T24/1388		83
Y10T24/1391	9	Article held by clip with spring [e.g., leaf, coil] member	CPCONLY	Y10T24/1391		200
Y10T24/1394	9	Article held by clip	CPCONLY	Y10T24/1394		566
Y10T24/1397	9	Article held by flexible connector [e.g., chain]	CPCONLY	Y10T24/1397		350
Y10T24/14	8	Bale and package ties, hose clamps	CPCONLY	Y10T24/14		717
Y10T24/1402	9	Packet holders	CPCONLY	Y10T24/1402		477
Y10T24/1404	10	Cord	CPCONLY	Y10T24/1404		468
Y10T24/1406	10	Adjustable bands	CPCONLY	Y10T24/1406		487
Y10T24/1408	10	Closed loops	CPCONLY	Y10T24/1408		249
Y10T24/141	10	Plastic bands	CPCONLY	Y10T24/141		306
Y10T24/1412	9	with tighteners	CPCONLY	Y10T24/1412		370
Y10T24/1414	10	Wedge	CPCONLY	Y10T24/1414		87
Y10T24/1416	10	Winder	CPCONLY	Y10T24/1416		209
Y10T24/1418	10	Self-locking [dead center or snap action]	CPCONLY	Y10T24/1418		268
Y10T24/142	11	Adjustable girth	CPCONLY	Y10T24/142		144
Y10T24/1422	12	Rack bar	CPCONLY	Y10T24/1422		38
Y10T24/1424	10	Lever	CPCONLY	Y10T24/1424		223
Y10T24/1427	10	Worm and tooth	CPCONLY	Y10T24/1427		223
Y10T24/1429	11	Pivotal worm band clamp	CPCONLY	Y10T24/1429		17
Y10T24/1431	11	Radial worm band clamp	CPCONLY	Y10T24/1431		32
Y10T24/1433	10	Integral thread	CPCONLY	Y10T24/1433		35
Y10T24/1435	11	External thread	CPCONLY	Y10T24/1435		63
Y10T24/1437	12	Both ends threaded	CPCONLY	Y10T24/1437		98
Y10T24/1439	10	Radial screw	CPCONLY	Y10T24/1439		169
Y10T24/1441	10	Tangential screw	CPCONLY	Y10T24/1441		700
Y10T24/1443	11	Adjustable girth	CPCONLY	Y10T24/1443		110
Y10T24/1445	12	Step adjustment	CPCONLY	Y10T24/1445		68
Y10T24/1447	13	Plural separable parts	CPCONLY	Y10T24/1447		46
Y10T24/1449	11	Wire	CPCONLY	Y10T24/1449		54
Y10T24/1451	11	Plural separable parts	CPCONLY	Y10T24/1451		119
Y10T24/1453	11	Pivotal strap parts	CPCONLY	Y10T24/1453		63
Y10T24/1455	11	Plural wrap	CPCONLY	Y10T24/1455		29
Y10T24/1457	9	Metal bands	CPCONLY	Y10T24/1457		531
Y10T24/1459	10	Separate connections	CPCONLY	Y10T24/1459		252
Y10T24/1461	11	One piece	CPCONLY	Y10T24/1461		282
Y10T24/1463	12	Sheet metal	CPCONLY	Y10T24/1463		111
Y10T24/1465	13	Buckle band connection	CPCONLY	Y10T24/1465		282
Y10T24/1467	13	Swedged sheet metal band connection	CPCONLY	Y10T24/1467		240
Y10T24/1469	13	End-to-end integral with band connecting means	CPCONLY	Y10T24/1469		88
Y10T24/1471	11	Pivoted parts	CPCONLY	Y10T24/1471		106
Y10T24/1473	11	Wedging parts	CPCONLY	Y10T24/1473		155
Y10T24/1476	11	Wire	CPCONLY	Y10T24/1476		109
Y10T24/1478	10	Circumferentially swagged band clamp	CPCONLY	Y10T24/1478		222
Y10T24/148	10	End-to-end integral band end connection	CPCONLY	Y10T24/148		399
Y10T24/1482	10	Ratchet and tool tightened band clamp	CPCONLY	Y10T24/1482		198
Y10T24/1484	10	Spring closed band clamp	CPCONLY	Y10T24/1484		70
Y10T24/1486	10	Screw locked band clamp	CPCONLY	Y10T24/1486		62
Y10T24/1488	10	Swedged to lock band ends	CPCONLY	Y10T24/1488		57
Y10T24/149	9	Wire	CPCONLY	Y10T24/149		356
Y10T24/1492	10	Separate connections	CPCONLY	Y10T24/1492		193
Y10T24/1494	11	Wire	CPCONLY	Y10T24/1494		75
Y10T24/1496	9	Wooden bands	CPCONLY	Y10T24/1496		39
Y10T24/1498	9	Plastic band	CPCONLY	Y10T24/1498		1387
Y10T24/15	8	Bag fasteners	CPCONLY	Y10T24/15		708
Y10T24/152	9	Swedged bag tie	CPCONLY	Y10T24/152		79
Y10T24/153	9	Plastic band bag tie	CPCONLY	Y10T24/153		335
Y10T24/155	9	Resilient slot bag tie	CPCONLY	Y10T24/155		123
Y10T24/157	9	Twist-to-close bag tie	CPCONLY	Y10T24/157		95
Y10T24/158	9	Slides to lock bag end within housing	CPCONLY	Y10T24/158		59
Y10T24/16	8	Belt fasteners	CPCONLY	Y10T24/16		115
Y10T24/1604	9	Tighteners	CPCONLY	Y10T24/1604		72
Y10T24/1608	9	Hinged	CPCONLY	Y10T24/1608		110
Y10T24/1612	10	Ring connected belt ends	CPCONLY	Y10T24/1612		10
Y10T24/1616	10	Bent over flanged ends	CPCONLY	Y10T24/1616		10
Y10T24/162	10	Pintle pin connected belt ends	CPCONLY	Y10T24/162		106
Y10T24/1624	10	V and round belts	CPCONLY	Y10T24/1624		8
Y10T24/1628	10	Overlapped belt ends	CPCONLY	Y10T24/1628		7
Y10T24/1632	10	Sheet metal knuckles, common pintle	CPCONLY	Y10T24/1632		249
Y10T24/1636	10	Wire knuckles, common pintle	CPCONLY	Y10T24/1636		110
Y10T24/164	10	Knuckle integral with belt material	CPCONLY	Y10T24/164		22
Y10T24/1644	10	Multiple pintles interconnected V-belt type	CPCONLY	Y10T24/1644		48
Y10T24/1648	9	Lacing	CPCONLY	Y10T24/1648		37
Y10T24/1652	9	One piece	CPCONLY	Y10T24/1652		68
Y10T24/1656	10	Deflecting prong	CPCONLY	Y10T24/1656		162
Y10T24/166	9	Screw clamp	CPCONLY	Y10T24/166		126
Y10T24/1664	9	Splices	CPCONLY	Y10T24/1664		222
Y10T24/1668	9	Wire	CPCONLY	Y10T24/1668		61
Y10T24/1672	9	Butt connected belt ends	CPCONLY	Y10T24/1672		161
Y10T24/1676	9	V, round, trapezoidal belts	CPCONLY	Y10T24/1676		184
Y10T24/168	9	Flanged belt ends, connector hold ends	CPCONLY	Y10T24/168		125
Y10T24/1684	9	Lapped ends of endless belts	CPCONLY	Y10T24/1684		66
Y10T24/1688	9	Hinged ends of endless belts	CPCONLY	Y10T24/1688		38
Y10T24/1692	9	Wire strands reinforce belts	CPCONLY	Y10T24/1692		27
Y10T24/1696	9	Hook and loop type fastener and zipper belt end connection	CPCONLY	Y10T24/1696		28
Y10T24/17	8	Buttoners	CPCONLY	Y10T24/17		265
Y10T24/18	8	Cuff holder	CPCONLY	Y10T24/18		115
Y10T24/181	9	Adjustable	CPCONLY	Y10T24/181		86
Y10T24/183	9	Sleeve clasp and button for cuff	CPCONLY	Y10T24/183		121
Y10T24/184	9	Sleeve clasp and clasp for cuff	CPCONLY	Y10T24/184		59
Y10T24/185	9	Sleeve clasp and hook for cuff	CPCONLY	Y10T24/185		51
Y10T24/186	9	Sleeve clasp and pin for cuff	CPCONLY	Y10T24/186		46
Y10T24/188	9	Sleeve pin and button for cuff	CPCONLY	Y10T24/188		50
Y10T24/189	9	Pin fastener	CPCONLY	Y10T24/189		23
Y10T24/19	8	Necktie fastener	CPCONLY	Y10T24/19		65
Y10T24/1903	9	Bands	CPCONLY	Y10T24/1903		61
Y10T24/1907	10	End-securing pin	CPCONLY	Y10T24/1907		60
Y10T24/191	10	Gripping	CPCONLY	Y10T24/191		44
Y10T24/1914	10	Depressors	CPCONLY	Y10T24/1914		83
Y10T24/1917	11	Button engaging	CPCONLY	Y10T24/1917		66
Y10T24/1921	11	Pin or spur	CPCONLY	Y10T24/1921		51
Y10T24/1924	9	Button engaging	CPCONLY	Y10T24/1924		336
Y10T24/1928	10	Adjustable	CPCONLY	Y10T24/1928		48
Y10T24/1931	10	Cord loop	CPCONLY	Y10T24/1931		45
Y10T24/1934	10	Pivoted or sliding jaw	CPCONLY	Y10T24/1934		42
Y10T24/1938	10	Pin attached	CPCONLY	Y10T24/1938		104
Y10T24/1941	9	Collar button combined	CPCONLY	Y10T24/1941		67
Y10T24/1945	10	Clasp attached	CPCONLY	Y10T24/1945		51
Y10T24/1948	10	Pin attached	CPCONLY	Y10T24/1948		59
Y10T24/1952	10	Separable fastener	CPCONLY	Y10T24/1952		94
Y10T24/1955	9	Tie, attached hook	CPCONLY	Y10T24/1955		38
Y10T24/1959	9	Magnetic, adhesive, or snap type fastener connects tie to shirt	CPCONLY	Y10T24/1959		44
Y10T24/1962	9	Tie engaging loop with shirt engaging fastener	CPCONLY	Y10T24/1962		121
Y10T24/1966	9	Tie knot engaging and collar attaching	CPCONLY	Y10T24/1966		268
Y10T24/1969	9	Tie clip and shirt clasp attaching	CPCONLY	Y10T24/1969		53
Y10T24/1972	9	Tie clip and fastening pin	CPCONLY	Y10T24/1972		17
Y10T24/1976	9	Tie pin with shirt fastener	CPCONLY	Y10T24/1976		43
Y10T24/1979	9	Tie stiffener with shirt fastener	CPCONLY	Y10T24/1979		35
Y10T24/1983	9	with pivotal jaws having spring means	CPCONLY	Y10T24/1983		49
Y10T24/1986	9	Slider	CPCONLY	Y10T24/1986		65
Y10T24/199	9	Ornamental	CPCONLY	Y10T24/199		96
Y10T24/1993	10	Key shaped	CPCONLY	Y10T24/1993		4
Y10T24/1997	9	Resilient clasp	CPCONLY	Y10T24/1997		101
Y10T24/20	8	Paper fastener	CPCONLY	Y10T24/20		605
Y10T24/201	9	with screw threaded or notch engaging securing means	CPCONLY	Y10T24/201		164
Y10T24/202	9	Resiliently biased	CPCONLY	Y10T24/202		385
Y10T24/203	10	including means to open or close fastener	CPCONLY	Y10T24/203		272
Y10T24/204	11	Pivotally mounted on pintle	CPCONLY	Y10T24/204		277
Y10T24/205	10	One piece	CPCONLY	Y10T24/205		406
Y10T24/206	11	Mounted on support means	CPCONLY	Y10T24/206		280
Y10T24/207	9	Adhesive	CPCONLY	Y10T24/207		110
Y10T24/208	9	Corner fastened	CPCONLY	Y10T24/208		55
Y10T24/209	9	Paper-penetrating	CPCONLY	Y10T24/209		31
Y10T24/21	8	Strap tighteners	CPCONLY	Y10T24/21		341
Y10T24/2102	9	Cam lever and loop	CPCONLY	Y10T24/2102		47
Y10T24/2104	10	Step adjusted	CPCONLY	Y10T24/2104		37
Y10T24/2106	11	Ski boot and garment fasteners	CPCONLY	Y10T24/2106		224
Y10T24/2108	11	Split ring tightener	CPCONLY	Y10T24/2108		4
Y10T24/2109	11	Chain and rope tighteners	CPCONLY	Y10T24/2109		6
Y10T24/2111	11	Tire chain tighteners	CPCONLY	Y10T24/2111		18
Y10T24/2113	11	Strap tighteners	CPCONLY	Y10T24/2113		43
Y10T24/2115	11	Jewelry	CPCONLY	Y10T24/2115		20
Y10T24/2117	10	Strap tighteners	CPCONLY	Y10T24/2117		68
Y10T24/2119	10	Tie chain tighteners	CPCONLY	Y10T24/2119		263
Y10T24/2121	10	Cargo tie down	CPCONLY	Y10T24/2121		40
Y10T24/2123	10	Cover fasteners	CPCONLY	Y10T24/2123		2
Y10T24/2125	10	Chain tighteners	CPCONLY	Y10T24/2125		46
Y10T24/2126	10	Strap tightener machine	CPCONLY	Y10T24/2126		4
Y10T24/2128	10	toggle actuated sliding jaw	CPCONLY	Y10T24/2128		3
Y10T24/213	10	Jewelry	CPCONLY	Y10T24/213		19
Y10T24/2132	10	Split ring with tightener	CPCONLY	Y10T24/2132		5
Y10T24/2134	10	Concrete form panels	CPCONLY	Y10T24/2134		1
Y10T24/2136	10	Seat belt buckles	CPCONLY	Y10T24/2136		11
Y10T24/2138	10	Chain, cable, wire tighteners, and anchors	CPCONLY	Y10T24/2138		6
Y10T24/214	10	Envelope fasteners	CPCONLY	Y10T24/214		5
Y10T24/2142	10	Ski boot and garment fasteners	CPCONLY	Y10T24/2142		139
Y10T24/2143	9	Strap-attached folding lever	CPCONLY	Y10T24/2143		80
Y10T24/2145	10	toggle latch	CPCONLY	Y10T24/2145		10
Y10T24/2147	10	Strap tightener	CPCONLY	Y10T24/2147		79
Y10T24/2149	10	Tire antiskid strap tightener	CPCONLY	Y10T24/2149		13
Y10T24/2151	10	Seat belts	CPCONLY	Y10T24/2151		5
Y10T24/2153	10	Split ring fasteners	CPCONLY	Y10T24/2153		28
Y10T24/2155	10	Jewelry-watch straps	CPCONLY	Y10T24/2155		360
Y10T24/2157	10	Tie downs [covers, articles]	CPCONLY	Y10T24/2157		24
Y10T24/2158	10	Cable, wire, rope tightener	CPCONLY	Y10T24/2158		18
Y10T24/216	10	Ski boot and garment fasteners	CPCONLY	Y10T24/216		142
Y10T24/2162	10	Dress hem raisers	CPCONLY	Y10T24/2162		1
Y10T24/2164	9	Midline	CPCONLY	Y10T24/2164		157
Y10T24/2166	9	Jewelry	CPCONLY	Y10T24/2166		81
Y10T24/2168	9	Seat belt	CPCONLY	Y10T24/2168		27
Y10T24/217	9	Accordion straps	CPCONLY	Y10T24/217		5
Y10T24/2172	9	Parallel poles clamp	CPCONLY	Y10T24/2172		4
Y10T24/2174	9	form panels for walls	CPCONLY	Y10T24/2174		10
Y10T24/2175	9	Cargo tie down	CPCONLY	Y10T24/2175		439
Y10T24/2177	9	Chain tighteners	CPCONLY	Y10T24/2177		222
Y10T24/2179	9	Split band with tightener	CPCONLY	Y10T24/2179		22
Y10T24/2181	9	Tire chain tighteners	CPCONLY	Y10T24/2181		199
Y10T24/2183	9	Ski, boot, and shoe fasteners	CPCONLY	Y10T24/2183		378
Y10T24/2185	9	Fixed jaw with sliding or pivoted jaw	CPCONLY	Y10T24/2185		60
Y10T24/2187	9	Rack and pinion and circular tighteners	CPCONLY	Y10T24/2187		143
Y10T24/2189	9	Circular flange container clamp	CPCONLY	Y10T24/2189		89
Y10T24/2191	9	Strap stretching tools, tighteners, and sealers	CPCONLY	Y10T24/2191		151
Y10T24/2192	9	Buckle type	CPCONLY	Y10T24/2192		101
Y10T24/2194	9	Integral piece	CPCONLY	Y10T24/2194		26
Y10T24/2196	9	toggle	CPCONLY	Y10T24/2196		27
Y10T24/2198	9	Stocking top	CPCONLY	Y10T24/2198		
Y10T24/22	8	Trouser guards, clips, straps [e.g., above shoetops]	CPCONLY	Y10T24/22		114
Y10T24/23	8	Bedclothes holders	CPCONLY	Y10T24/23		432
Y10T24/24	8	T-head nongripping, fabric engaging type	CPCONLY	Y10T24/24		55
Y10T24/25	8	Zipper or required component thereof	CPCONLY	Y10T24/25		204
Y10T24/2502	9	Plural zippers	CPCONLY	Y10T24/2502		52
Y10T24/2504	10	Zipper chain	CPCONLY	Y10T24/2504		37
Y10T24/2505	10	having surface sealing structure	CPCONLY	Y10T24/2505		45
Y10T24/2507	9	having slider or interconnected sliders with access opening for diverse-art member	CPCONLY	Y10T24/2507		33
Y10T24/2509	9	Plural independently movable sliders	CPCONLY	Y10T24/2509		72
Y10T24/2511	9	with distinct, stationary means for anchoring slider	CPCONLY	Y10T24/2511		129
Y10T24/2513	10	and for aligning surfaces or obstructing slider movement	CPCONLY	Y10T24/2513		94
Y10T24/2514	9	with distinct member for sealing surfaces	CPCONLY	Y10T24/2514		219
Y10T24/2516	9	with distinct separable-fastener	CPCONLY	Y10T24/2516		79
Y10T24/2518	9	having coiled or bent continuous wire interlocking surface	CPCONLY	Y10T24/2518		127
Y10T24/252	10	with stringer tape interwoven or knitted therewith	CPCONLY	Y10T24/252		110
Y10T24/2521	10	with stringer tape having specific weave or knit pattern	CPCONLY	Y10T24/2521		74
Y10T24/2523	10	with core encircled by coils or bends	CPCONLY	Y10T24/2523		76
Y10T24/2525	10	with mounting portion having structural formations complementary to stitching	CPCONLY	Y10T24/2525		29
Y10T24/2527	10	Attached by stitching	CPCONLY	Y10T24/2527		89
Y10T24/2529	11	String or stringer tape having distinctive property [e.g., heat sensitive]	CPCONLY	Y10T24/2529		37
Y10T24/253	10	with stringer tape having distinctive property [e.g., heat sensitive]	CPCONLY	Y10T24/253		37
Y10T24/2532	9	having interlocking surface with continuous cross section	CPCONLY	Y10T24/2532		286
Y10T24/2534	10	Opposed interlocking surface having dissimilar cross section	CPCONLY	Y10T24/2534		309
Y10T24/2536	9	having interlocking surface formed from single member with varying cross section	CPCONLY	Y10T24/2536		91
Y10T24/2538	10	Opposed surface having dissimilar cross section	CPCONLY	Y10T24/2538		19
Y10T24/2539	9	Interlocking surface constructed from plural elements in series	CPCONLY	Y10T24/2539		127
Y10T24/2541	10	having either noninterlocking element in, interrupted, or unequal length series	CPCONLY	Y10T24/2541		28
Y10T24/2543	10	with element structural feature unrelated to interlocking or securing portion	CPCONLY	Y10T24/2543		73
Y10T24/2545	10	Dissimilar opposed elements	CPCONLY	Y10T24/2545		79
Y10T24/2546	10	Wire element	CPCONLY	Y10T24/2546		25
Y10T24/2548	10	Preattached to mounting cord	CPCONLY	Y10T24/2548		63
Y10T24/255	10	having interlocking portion with specific shape	CPCONLY	Y10T24/255		52
Y10T24/2552	11	including symmetrical formations on opposite walls for engaging mating elements	CPCONLY	Y10T24/2552		87
Y10T24/2554	11	including complementary formations on opposite walls for engaging mating elements	CPCONLY	Y10T24/2554		162
Y10T24/2555	12	Mating elements having reversed orientation of formations	CPCONLY	Y10T24/2555		14
Y10T24/2557	10	having mounting portion with specific shape or structure	CPCONLY	Y10T24/2557		152
Y10T24/2559	11	including embracing jaws	CPCONLY	Y10T24/2559		153
Y10T24/2561	9	Slider having specific configuration, construction, adaptation, or material	CPCONLY	Y10T24/2561		259
Y10T24/2563	10	including relatively movable spaced wings [i.e., restraining walls]	CPCONLY	Y10T24/2563		101
Y10T24/2564	10	including converging channel and relatively movable separator island	CPCONLY	Y10T24/2564		22
Y10T24/2566	10	including position locking-means attached thereto	CPCONLY	Y10T24/2566		120
Y10T24/2568	11	Protrusion on pull tab directly engaging interlocking surfaces	CPCONLY	Y10T24/2568		221
Y10T24/257	11	having surface engaging element shifted by reorientation of pull tab	CPCONLY	Y10T24/257		58
Y10T24/2571	12	Resilient or spring biased element	CPCONLY	Y10T24/2571		188
Y10T24/2573	13	Selectively shifted by either of two pull tabs	CPCONLY	Y10T24/2573		24
Y10T24/2575	13	with relatively movable link	CPCONLY	Y10T24/2575		26
Y10T24/2577	13	Biased by distinct spring	CPCONLY	Y10T24/2577		128
Y10T24/2579	13	having aperture cooperating with guide post	CPCONLY	Y10T24/2579		16
Y10T24/258	10	including means preventing bunching of structure-to-be-secured or stringer	CPCONLY	Y10T24/258		54
Y10T24/2582	10	having specific contour or arrangement of converging channel, separator island, or wing	CPCONLY	Y10T24/2582		207
Y10T24/2584	11	Spaced segments of each wall of channel supported by different wings	CPCONLY	Y10T24/2584		66
Y10T24/2586	10	including pull tab attaching means	CPCONLY	Y10T24/2586		324
Y10T24/2588	10	including means for attaching components of slider together	CPCONLY	Y10T24/2588		83
Y10T24/2589	10	with ornamental slider	CPCONLY	Y10T24/2589		70
Y10T24/2591	9	with means for concealing surfaces	CPCONLY	Y10T24/2591		146
Y10T24/2593	9	including complementary, aligning means attached to ends of interlocking surfaces	CPCONLY	Y10T24/2593		216
Y10T24/2595	10	having specific mounting connection or reinforcing structure at connection	CPCONLY	Y10T24/2595		123
Y10T24/2596	9	including means attaching interlocking surfaces together	CPCONLY	Y10T24/2596		144
Y10T24/2598	9	including means for obstructing movement of slider	CPCONLY	Y10T24/2598		225
Y10T24/26	8	Slit closing means including guides on opposite edges of slit and slidable bridging component	CPCONLY	Y10T24/26		79
Y10T24/262	9	with hand-actuated lever for shifting bridging component	CPCONLY	Y10T24/262		16
Y10T24/264	9	including structure linking and allowing variations in separation between opposite-guide-contacting portions of component	CPCONLY	Y10T24/264		32
Y10T24/266	9	having bridging components attached in series along carrying element	CPCONLY	Y10T24/266		74
Y10T24/268	9	having separate, independently movable, bridging components	CPCONLY	Y10T24/268		11
Y10T24/27	8	including readily dissociable fastener having numerous, protruding, unitary filaments randomly interlocking with, and simultaneously moving towards, mating structure [e.g., hook-loop type fastener]	CPCONLY	Y10T24/27		688
Y10T24/2708	9	Combined with diverse fastener	CPCONLY	Y10T24/2708		595
Y10T24/2717	9	with distinct structure for sealing securement joint	CPCONLY	Y10T24/2717		37
Y10T24/2725	9	with feature facilitating, enhancing, or causing attachment of filament mounting surface to support therefor	CPCONLY	Y10T24/2725		110
Y10T24/2733	9	having filaments formed from continuous element interwoven or knitted into distinct, mounting surface fabric	CPCONLY	Y10T24/2733		93
Y10T24/2742	9	having filaments of varied shape or size on same mounting surface	CPCONLY	Y10T24/2742		77
Y10T24/275	9	with feature facilitating or causing attachment of filaments to mounting surface	CPCONLY	Y10T24/275		60
Y10T24/2758	10	Thermal or adhesive	CPCONLY	Y10T24/2758		97
Y10T24/2767	9	having several, repeating, interlocking formations along length of filaments	CPCONLY	Y10T24/2767		87
Y10T24/2775	9	having opposed structure formed from distinct filaments of diverse shape to those mating therewith	CPCONLY	Y10T24/2775		158
Y10T24/2783	9	having filaments constructed from coated, laminated, or composite material	CPCONLY	Y10T24/2783		80
Y10T24/2792	9	having mounting surface and filaments constructed from common piece of material	CPCONLY	Y10T24/2792		275
Y10T24/28	8	Freight container to freight container fastener	CPCONLY	Y10T24/28		144
Y10T24/29	8	Drum or can spacer fastener	CPCONLY	Y10T24/29		80
Y10T24/30	8	Trim molding fastener	CPCONLY	Y10T24/30		278
Y10T24/301	9	having externally threaded attaching means	CPCONLY	Y10T24/301		78
Y10T24/302	10	and laterally extending biasing appendage	CPCONLY	Y10T24/302		59
Y10T24/303	9	having laterally extending biasing appendage	CPCONLY	Y10T24/303		114
Y10T24/304	9	Resilient metal type	CPCONLY	Y10T24/304		263
Y10T24/306	10	Strip formed	CPCONLY	Y10T24/306		84
Y10T24/307	10	Sheet metal formed	CPCONLY	Y10T24/307		383
Y10T24/308	10	Wire formed	CPCONLY	Y10T24/308		114
Y10T24/309	9	Plastic type	CPCONLY	Y10T24/309		660
Y10T24/31	8	Plural fasteners having intermediate flaccid connector	CPCONLY	Y10T24/31		252
Y10T24/312	9	Chain connector	CPCONLY	Y10T24/312		292
Y10T24/314	9	Elastic connector	CPCONLY	Y10T24/314		317
Y10T24/316	10	Strap connector	CPCONLY	Y10T24/316		305
Y10T24/318	9	Strap connector	CPCONLY	Y10T24/318		310
Y10T24/32	8	having magnetic fastener	CPCONLY	Y10T24/32		883
Y10T24/33	8	having adhesive fastener	CPCONLY	Y10T24/33		308
Y10T24/34	8	Combined diverse multipart fasteners	CPCONLY	Y10T24/34		179
Y10T24/3401	9	Buckle	CPCONLY	Y10T24/3401		86
Y10T24/3403	10	and buckles	CPCONLY	Y10T24/3403		117
Y10T24/3404	11	having separate material adjustment means	CPCONLY	Y10T24/3404		88
Y10T24/3405	11	having separate disconnect means	CPCONLY	Y10T24/3405		63
Y10T24/3407	12	Pivotal lever type	CPCONLY	Y10T24/3407		51
Y10T24/3408	11	having disconnect structure	CPCONLY	Y10T24/3408		118
Y10T24/3409	12	Resilient cooperating means	CPCONLY	Y10T24/3409		71
Y10T24/3411	11	and pin	CPCONLY	Y10T24/3411		17
Y10T24/3412	11	Crossed belt accommodating	CPCONLY	Y10T24/3412		61
Y10T24/3413	10	and clasp	CPCONLY	Y10T24/3413		180
Y10T24/3415	10	and pin	CPCONLY	Y10T24/3415		93
Y10T24/3416	10	and hook	CPCONLY	Y10T24/3416		180
Y10T24/3417	11	having disconnect means	CPCONLY	Y10T24/3417		64
Y10T24/3419	11	having penetrating prong	CPCONLY	Y10T24/3419		69
Y10T24/342	11	Buckle having plural receiving slots	CPCONLY	Y10T24/342		106
Y10T24/3421	10	including a button fastening element	CPCONLY	Y10T24/3421		18
Y10T24/3423	10	and separable fastening means for attached fastener	CPCONLY	Y10T24/3423		172
Y10T24/3424	11	Snap fastener	CPCONLY	Y10T24/3424		159
Y10T24/3425	10	having roller means	CPCONLY	Y10T24/3425		17
Y10T24/3427	9	Clasp	CPCONLY	Y10T24/3427		392
Y10T24/3428	10	having pivoted members	CPCONLY	Y10T24/3428		239
Y10T24/3429	11	Cam type member	CPCONLY	Y10T24/3429		104
Y10T24/3431	11	Plural clasps	CPCONLY	Y10T24/3431		122
Y10T24/3432	12	and toggle operator	CPCONLY	Y10T24/3432		17
Y10T24/3433	12	Spring biased	CPCONLY	Y10T24/3433		113
Y10T24/3435	13	Coil	CPCONLY	Y10T24/3435		169
Y10T24/3436	12	and cam	CPCONLY	Y10T24/3436		19
Y10T24/3437	11	Coil spring biased	CPCONLY	Y10T24/3437		110
Y10T24/3439	10	Plural clasps	CPCONLY	Y10T24/3439		311
Y10T24/344	11	Resilient type clasp	CPCONLY	Y10T24/344		527
Y10T24/3441	12	and cam	CPCONLY	Y10T24/3441		86
Y10T24/3443	12	Spring biased jaw	CPCONLY	Y10T24/3443		98
Y10T24/3444	12	Circular work engageable	CPCONLY	Y10T24/3444		504
Y10T24/3445	12	and pin attachment	CPCONLY	Y10T24/3445		40
Y10T24/3447	12	and disconnect means	CPCONLY	Y10T24/3447		72
Y10T24/3448	10	including a button fastening element	CPCONLY	Y10T24/3448		75
Y10T24/3449	10	and hook	CPCONLY	Y10T24/3449		525
Y10T24/3451	11	having intermediate connector allowing movement	CPCONLY	Y10T24/3451		104
Y10T24/3452	12	and adjustment means	CPCONLY	Y10T24/3452		42
Y10T24/3453	11	having gripping configuration on clasp jaw	CPCONLY	Y10T24/3453		170
Y10T24/3455	12	Penetrating type	CPCONLY	Y10T24/3455		82
Y10T24/3456	11	having cam	CPCONLY	Y10T24/3456		39
Y10T24/3457	11	having separable jaws	CPCONLY	Y10T24/3457		51
Y10T24/3459	10	and penetrating prong	CPCONLY	Y10T24/3459		164
Y10T24/346	10	and pin	CPCONLY	Y10T24/346		171
Y10T24/3461	11	having separate pin loss prevention means	CPCONLY	Y10T24/3461		57
Y10T24/3463	12	Pin coextensive, coplanar, and contiguous with clasp jaw	CPCONLY	Y10T24/3463		59
Y10T24/3464	11	Pin coextensive, coplanar, and contiguous with clasp jaw	CPCONLY	Y10T24/3464		33
Y10T24/3465	11	Pin forms part of clasp jaw	CPCONLY	Y10T24/3465		48
Y10T24/3467	9	Pin	CPCONLY	Y10T24/3467		105
Y10T24/3468	10	and pin	CPCONLY	Y10T24/3468		138
Y10T24/3469	11	and disconnect means	CPCONLY	Y10T24/3469		42
Y10T24/3471	12	Hook and eye type	CPCONLY	Y10T24/3471		82
Y10T24/3472	11	and hook	CPCONLY	Y10T24/3472		85
Y10T24/3473	12	having connector allowing movement	CPCONLY	Y10T24/3473		27
Y10T24/3475	11	having intermediate connector allowing movement	CPCONLY	Y10T24/3475		49
Y10T24/3476	10	and hook	CPCONLY	Y10T24/3476		176
Y10T24/3477	11	having intermediate connector allowing movement	CPCONLY	Y10T24/3477		46
Y10T24/3479	12	and adjustment means	CPCONLY	Y10T24/3479		10
Y10T24/348	11	Hook having locking means	CPCONLY	Y10T24/348		45
Y10T24/3481	10	including a button fastening element	CPCONLY	Y10T24/3481		33
Y10T24/3483	10	and penetrating prong	CPCONLY	Y10T24/3483		73
Y10T24/3484	9	Hook	CPCONLY	Y10T24/3484		266
Y10T24/3485	10	and hook	CPCONLY	Y10T24/3485		405
Y10T24/3487	11	having biasing spring	CPCONLY	Y10T24/3487		104
Y10T24/3488	11	Separately connected	CPCONLY	Y10T24/3488		63
Y10T24/3489	11	having securing means	CPCONLY	Y10T24/3489		83
Y10T24/3491	12	Sliding	CPCONLY	Y10T24/3491		59
Y10T24/3492	12	Snap type	CPCONLY	Y10T24/3492		83
Y10T24/3493	12	Pivoted	CPCONLY	Y10T24/3493		101
Y10T24/3495	10	having penetrating prong	CPCONLY	Y10T24/3495		96
Y10T24/3496	10	including a button fastening element	CPCONLY	Y10T24/3496		51
Y10T24/3497	9	Button fastening element including another fastener element	CPCONLY	Y10T24/3497		98
Y10T24/3499	9	Penetrating prong	CPCONLY	Y10T24/3499		119
Y10T24/35	8	Interchangeable button loop and pin	CPCONLY	Y10T24/35		13
Y10T24/36	8	Button with fastener	CPCONLY	Y10T24/36		215
Y10T24/3602	9	Loss-preventing devices	CPCONLY	Y10T24/3602		191
Y10T24/3604	9	Adjustable	CPCONLY	Y10T24/3604		65
Y10T24/3606	9	Cloth shanks and covers	CPCONLY	Y10T24/3606		131
Y10T24/3609	9	Multiple attachment	CPCONLY	Y10T24/3609		56
Y10T24/3611	9	Deflecting prong or rivet	CPCONLY	Y10T24/3611		435
Y10T24/3613	10	Anvil or plate	CPCONLY	Y10T24/3613		330
Y10T24/3615	10	Integral	CPCONLY	Y10T24/3615		190
Y10T24/3617	9	Hinged leaf	CPCONLY	Y10T24/3617		356
Y10T24/3619	10	Axially rotating	CPCONLY	Y10T24/3619		107
Y10T24/3621	10	Double	CPCONLY	Y10T24/3621		127
Y10T24/3623	10	Sliding	CPCONLY	Y10T24/3623		72
Y10T24/3626	9	Sliding bar	CPCONLY	Y10T24/3626		82
Y10T24/3628	9	Integral or rigid stud	CPCONLY	Y10T24/3628		378
Y10T24/363	10	Bent sheet metal [integral]	CPCONLY	Y10T24/363		134
Y10T24/3632	9	Link	CPCONLY	Y10T24/3632		88
Y10T24/3634	10	Integral rubber button, extendable shank	CPCONLY	Y10T24/3634		7
Y10T24/3636	10	Extendably connected	CPCONLY	Y10T24/3636		80
Y10T24/3638	10	Pivoted leaf	CPCONLY	Y10T24/3638		86
Y10T24/364	10	Releasably locked	CPCONLY	Y10T24/364		162
Y10T24/3643	10	French cuff	CPCONLY	Y10T24/3643		65
Y10T24/3645	10	Tufting	CPCONLY	Y10T24/3645		86
Y10T24/3647	10	Integral piece	CPCONLY	Y10T24/3647		105
Y10T24/3649	9	Pin attached	CPCONLY	Y10T24/3649		390
Y10T24/3651	9	Separable	CPCONLY	Y10T24/3651		284
Y10T24/3653	10	Screw	CPCONLY	Y10T24/3653		248
Y10T24/3655	10	Spring	CPCONLY	Y10T24/3655		173
Y10T24/3657	11	Resilient head	CPCONLY	Y10T24/3657		96
Y10T24/366	11	Resilient socket	CPCONLY	Y10T24/366		278
Y10T24/3662	11	Rotating head	CPCONLY	Y10T24/3662		149
Y10T24/3664	11	with operating devices	CPCONLY	Y10T24/3664		283
Y10T24/3666	9	Separate thread bar	CPCONLY	Y10T24/3666		57
Y10T24/3668	9	Spiral fastener	CPCONLY	Y10T24/3668		127
Y10T24/367	9	Covers	CPCONLY	Y10T24/367		289
Y10T24/3672	10	Metal or plastic caps	CPCONLY	Y10T24/3672		188
Y10T24/3674	9	Pads	CPCONLY	Y10T24/3674		21
Y10T24/3677	9	Flexible button	CPCONLY	Y10T24/3677		30
Y10T24/3679	9	Swivel button	CPCONLY	Y10T24/3679		30
Y10T24/3681	9	Tufting type	CPCONLY	Y10T24/3681		120
Y10T24/3683	9	Button with cavity for friction grip fastener	CPCONLY	Y10T24/3683		231
Y10T24/3685	9	Button with shank for friction grip fastener	CPCONLY	Y10T24/3685		87
Y10T24/3687	9	Heat or adhesive secured type	CPCONLY	Y10T24/3687		54
Y10T24/3689	9	Thread or wire through apertured button	CPCONLY	Y10T24/3689		194
Y10T24/3691	9	Eye shank type button	CPCONLY	Y10T24/3691		172
Y10T24/3694	9	Ornamental type	CPCONLY	Y10T24/3694		169
Y10T24/3696	9	for cuff or collar	CPCONLY	Y10T24/3696		108
Y10T24/3698	9	Fabric embracing	CPCONLY	Y10T24/3698		74
Y10T24/37	8	Drawstring, laced-fastener, or separate essential cooperating device therefor	CPCONLY	Y10T24/37		248
Y10T24/3703	9	Includes separate device for holding drawn portion of lacing	CPCONLY	Y10T24/3703		187
Y10T24/3705	10	Device engages tie in lacing	CPCONLY	Y10T24/3705		243
Y10T24/3708	11	and fully covers tie	CPCONLY	Y10T24/3708		77
Y10T24/3711	10	Device engages element or formation on lacing	CPCONLY	Y10T24/3711		106
Y10T24/3713	10	having relatively movable holding components or surfaces	CPCONLY	Y10T24/3713		166
Y10T24/3716	11	with pivotal connection therebetween	CPCONLY	Y10T24/3716		221
Y10T24/3718	11	with integral resilient linking structure therebetween	CPCONLY	Y10T24/3718		237
Y10T24/3721	12	formed from wire	CPCONLY	Y10T24/3721		52
Y10T24/3724	10	having lacing wound thereabout or wedged therein	CPCONLY	Y10T24/3724		235
Y10T24/3726	9	with holding means fixedly mounted on lacing	CPCONLY	Y10T24/3726		132
Y10T24/3729	10	and forming lacing tips	CPCONLY	Y10T24/3729		71
Y10T24/3732	9	Includes lacing holding structure within directing means therefor	CPCONLY	Y10T24/3732		60
Y10T24/3734	9	having diverse shaped directing means for lacing	CPCONLY	Y10T24/3734		100
Y10T24/3737	9	having lacing directing means in particular pattern	CPCONLY	Y10T24/3737		87
Y10T24/3739	9	Includes lacing guiding roller within directing means	CPCONLY	Y10T24/3739		95
Y10T24/3742	9	having eyelet type directing means	CPCONLY	Y10T24/3742		172
Y10T24/3745	10	with permanently deformed mounting structure	CPCONLY	Y10T24/3745		126
Y10T24/3747	11	Mounting structure formed from different material than directing passage	CPCONLY	Y10T24/3747		52
Y10T24/375	9	having hook shaped directing means	CPCONLY	Y10T24/375		88
Y10T24/3753	10	and movable component or surface for closing throat	CPCONLY	Y10T24/3753		65
Y10T24/3755	10	Mounted by structure allowing bodily movement thereof	CPCONLY	Y10T24/3755		36
Y10T24/3758	10	formed from wire	CPCONLY	Y10T24/3758		38
Y10T24/3761	10	with mounting structure formed from different material	CPCONLY	Y10T24/3761		57
Y10T24/3763	10	with permanently deformed mounting structure	CPCONLY	Y10T24/3763		79
Y10T24/3766	11	Expanding stud	CPCONLY	Y10T24/3766		85
Y10T24/3768	9	having loop or sleeve shaped directing means	CPCONLY	Y10T24/3768		93
Y10T24/3771	10	Entirely formed from flaccid material	CPCONLY	Y10T24/3771		33
Y10T24/3774	10	Mounted by structure allowing bodily movement thereof	CPCONLY	Y10T24/3774		40
Y10T24/3776	10	formed from wire	CPCONLY	Y10T24/3776		37
Y10T24/3779	10	with permanently deformed mounting structure	CPCONLY	Y10T24/3779		33
Y10T24/3782	11	Loop or sleeve closed when mounted	CPCONLY	Y10T24/3782		46
Y10T24/3784	11	Expanding stud	CPCONLY	Y10T24/3784		32
Y10T24/3787	9	having elastic segment in lacing	CPCONLY	Y10T24/3787		109
Y10T24/3789	9	having means covering tip of lacing	CPCONLY	Y10T24/3789		154
Y10T24/3792	10	Tasseled	CPCONLY	Y10T24/3792		22
Y10T24/3795	10	with plural components	CPCONLY	Y10T24/3795		51
Y10T24/3797	10	with permanently deformed mounting structure	CPCONLY	Y10T24/3797		109
Y10T24/38	8	Strap cable or pipe button	CPCONLY	Y10T24/38		262
Y10T24/39	8	Cord and rope holders	CPCONLY	Y10T24/39		1503
Y10T24/3902	9	Chain	CPCONLY	Y10T24/3902		569
Y10T24/3904	10	Bead chain fasteners	CPCONLY	Y10T24/3904		304
Y10T24/3907	9	Sheathed strand	CPCONLY	Y10T24/3907		133
Y10T24/3909	9	Plural-strand cord or rope	CPCONLY	Y10T24/3909		311
Y10T24/3911	9	Friction disk	CPCONLY	Y10T24/3911		152
Y10T24/3913	9	Knot engaging	CPCONLY	Y10T24/3913		264
Y10T24/3916	9	One-piece	CPCONLY	Y10T24/3916		1077
Y10T24/3918	10	Wedge slot	CPCONLY	Y10T24/3918		519
Y10T24/392	10	Wire	CPCONLY	Y10T24/392		407
Y10T24/3922	11	Cord runs through center of coil	CPCONLY	Y10T24/3922		109
Y10T24/3924	10	Sheet material	CPCONLY	Y10T24/3924		329
Y10T24/3927	10	Slack adjuster	CPCONLY	Y10T24/3927		185
Y10T24/3929	10	Rubber	CPCONLY	Y10T24/3929		81
Y10T24/3931	10	Wire	CPCONLY	Y10T24/3931		66
Y10T24/3933	10	Swagged, deformable	CPCONLY	Y10T24/3933		82
Y10T24/3936	9	Pivoted part	CPCONLY	Y10T24/3936		858
Y10T24/3938	10	Lever tension	CPCONLY	Y10T24/3938		324
Y10T24/394	10	Cam lever	CPCONLY	Y10T24/394		1145
Y10T24/3942	11	Laterally shifted rope	CPCONLY	Y10T24/3942		23
Y10T24/3944	11	Cam engaging or disengaging	CPCONLY	Y10T24/3944		139
Y10T24/3947	11	Fixed and movable jaws, movable jaw pulled	CPCONLY	Y10T24/3947		98
Y10T24/3949	11	Link-connected parallel jaws	CPCONLY	Y10T24/3949		68
Y10T24/3951	11	Dual cam	CPCONLY	Y10T24/3951		145
Y10T24/3953	10	Pivotal means with plate aperture	CPCONLY	Y10T24/3953		74
Y10T24/3956	10	Jaws locked together by cam, wedge, lever, or screw	CPCONLY	Y10T24/3956		139
Y10T24/3958	9	Screw clamp	CPCONLY	Y10T24/3958		541
Y10T24/396	10	Screw clamp with snubber	CPCONLY	Y10T24/396		88
Y10T24/3962	10	Tangential bolt	CPCONLY	Y10T24/3962		104
Y10T24/3964	10	J-shaped bolt	CPCONLY	Y10T24/3964		134
Y10T24/3967	10	Bolt perpendicular to cable axis	CPCONLY	Y10T24/3967		206
Y10T24/3969	9	Sliding part or wedge	CPCONLY	Y10T24/3969		872
Y10T24/3971	10	Rope looped about movable member	CPCONLY	Y10T24/3971		101
Y10T24/3973	10	Rope clamped between cone and socket	CPCONLY	Y10T24/3973		95
Y10T24/3976	10	Sliding ball	CPCONLY	Y10T24/3976		146
Y10T24/3978	10	Screw actuated	CPCONLY	Y10T24/3978		85
Y10T24/398	9	Bendable, ductible	CPCONLY	Y10T24/398		303
Y10T24/3982	9	Safety release	CPCONLY	Y10T24/3982		151
Y10T24/3984	9	Alignable aperture and spring pressed moving element	CPCONLY	Y10T24/3984		411
Y10T24/3987	9	Loop, adjustable	CPCONLY	Y10T24/3987		302
Y10T24/3989	9	Snubbers, cleats by dielectric loss	CPCONLY	Y10T24/3989		96
Y10T24/3991	9	Loop engaging	CPCONLY	Y10T24/3991		158
Y10T24/3993	9	Ball or roller	CPCONLY	Y10T24/3993		62
Y10T24/3996	9	Sliding wedge	CPCONLY	Y10T24/3996		211
Y10T24/3998	9	Helical preform	CPCONLY	Y10T24/3998		97
Y10T24/40	8	Buckles	CPCONLY	Y10T24/40		545
Y10T24/4002	9	Harness	CPCONLY	Y10T24/4002		156
Y10T24/4005	10	Combined buckles and snap hooks	CPCONLY	Y10T24/4005		165
Y10T24/4007	10	Lock	CPCONLY	Y10T24/4007		135
Y10T24/4009	11	Key	CPCONLY	Y10T24/4009		66
Y10T24/4012	10	Clamping	CPCONLY	Y10T24/4012		144
Y10T24/4014	11	One-piece	CPCONLY	Y10T24/4014		79
Y10T24/4016	11	Pivoted part or lever	CPCONLY	Y10T24/4016		589
Y10T24/4019	11	Sliding part or wedge	CPCONLY	Y10T24/4019		263
Y10T24/4021	10	Cross bails	CPCONLY	Y10T24/4021		25
Y10T24/4023	11	Pivoted stud plate	CPCONLY	Y10T24/4023		61
Y10T24/4026	11	Rigid stud	CPCONLY	Y10T24/4026		93
Y10T24/4028	10	Penetrating tongue	CPCONLY	Y10T24/4028		1
Y10T24/403	11	Guarded	CPCONLY	Y10T24/403		93
Y10T24/4033	11	One-piece	CPCONLY	Y10T24/4033		285
Y10T24/4035	11	Multiple	CPCONLY	Y10T24/4035		115
Y10T24/4037	11	Pivoted	CPCONLY	Y10T24/4037		387
Y10T24/404	12	Lever actuated	CPCONLY	Y10T24/404		62
Y10T24/4042	12	Stud	CPCONLY	Y10T24/4042		242
Y10T24/4044	11	Sliding part or wedge	CPCONLY	Y10T24/4044		171
Y10T24/4047	10	Strap loops and attaching devices	CPCONLY	Y10T24/4047		318
Y10T24/4049	10	Loop shields	CPCONLY	Y10T24/4049		92
Y10T24/4051	9	Garment shielded	CPCONLY	Y10T24/4051		176
Y10T24/4053	9	Combined pressure bar and guard	CPCONLY	Y10T24/4053		
Y10T24/4056	10	Hook attached	CPCONLY	Y10T24/4056		63
Y10T24/4058	9	Penetrating prong	CPCONLY	Y10T24/4058		
Y10T24/406	10	One-piece	CPCONLY	Y10T24/406		192
Y10T24/4063	11	Hook attached	CPCONLY	Y10T24/4063		24
Y10T24/4065	10	Pivoted	CPCONLY	Y10T24/4065		211
Y10T24/4067	11	Hook attached	CPCONLY	Y10T24/4067		25
Y10T24/407	10	Slide	CPCONLY	Y10T24/407		52
Y10T24/4072	9	Pivoted lever	CPCONLY	Y10T24/4072		801
Y10T24/4074	10	Hook attached	CPCONLY	Y10T24/4074		158
Y10T24/4077	10	Looped strap	CPCONLY	Y10T24/4077		218
Y10T24/4079	9	Sliding part of wedge	CPCONLY	Y10T24/4079		304
Y10T24/4081	10	Hook attached	CPCONLY	Y10T24/4081		52
Y10T24/4084	10	Looped strap	CPCONLY	Y10T24/4084		354
Y10T24/4086	9	Looped strap	CPCONLY	Y10T24/4086		241
Y10T24/4088	9	One-piece	CPCONLY	Y10T24/4088		375
Y10T24/4091	10	Hook attached	CPCONLY	Y10T24/4091		106
Y10T24/4093	10	Looped strap	CPCONLY	Y10T24/4093		445
Y10T24/4095	9	Fabric covered	CPCONLY	Y10T24/4095		68
Y10T24/4098	9	Ornamental and/or object supported	CPCONLY	Y10T24/4098		167
Y10T24/41	8	Pierced earring fastener	CPCONLY	Y10T24/41		95
Y10T24/42	8	Independent, headed, aperture pass-through fastener	CPCONLY	Y10T24/42		613
Y10T24/43	8	Fastener with revolving component wrapping structure-to-be-secured about fastener	CPCONLY	Y10T24/43		25
Y10T24/44	8	Clasp, clip, support-clamp, or required component thereof	CPCONLY	Y10T24/44		221
Y10T24/44009	9	Gripping member adapted for tool actuation or release	CPCONLY	Y10T24/44009		146
Y10T24/44017	9	with specific mounting means for attaching to rigid or semirigid supporting structure or structure-to-be-secured	CPCONLY	Y10T24/44017		914
Y10T24/44026	10	for cooperating with aperture in supporting structure or structure-to-be-secured	CPCONLY	Y10T24/44026		820
Y10T24/44034	9	Dissociable gripping members	CPCONLY	Y10T24/44034		361
Y10T24/44043	10	Channel and inserted bar	CPCONLY	Y10T24/44043		125
Y10T24/44051	11	having operator or locking means	CPCONLY	Y10T24/44051		54
Y10T24/4406	11	Resilient channel or bar	CPCONLY	Y10T24/4406		211
Y10T24/44068	9	having gripping member actuated by fluid force	CPCONLY	Y10T24/44068		160
Y10T24/44077	9	having inserted and receiving interlocking members connected by bendable, nonbiasing strap	CPCONLY	Y10T24/44077		67
Y10T24/44085	10	Discrete flaccid strap	CPCONLY	Y10T24/44085		33
Y10T24/44094	11	with distinct means for preventing separation of members	CPCONLY	Y10T24/44094		16
Y10T24/44103	12	Slidably mounted	CPCONLY	Y10T24/44103		9
Y10T24/44111	11	with separate flaccid flap or pocket for protecting structure-to-be-secured	CPCONLY	Y10T24/44111		13
Y10T24/4412	11	with separate, cavity-blocking gate on receiving member	CPCONLY	Y10T24/4412		39
Y10T24/44128	11	Resilient inserted or receiving member	CPCONLY	Y10T24/44128		68
Y10T24/44137	12	Inserted or receiving member substantially covered or coated for protection or to promote gripping	CPCONLY	Y10T24/44137		27
Y10T24/44145	12	Resilient inserted member	CPCONLY	Y10T24/44145		33
Y10T24/44154	13	having engaging face formed from nonmetallic material	CPCONLY	Y10T24/44154		47
Y10T24/44162	14	having head and neck type engaging face	CPCONLY	Y10T24/44162		45
Y10T24/44171	15	having internal supporting or reinforcing element	CPCONLY	Y10T24/44171		21
Y10T24/44179	16	Circular head or neck	CPCONLY	Y10T24/44179		38
Y10T24/44188	11	having wedge shaped, inserted and receiving members	CPCONLY	Y10T24/44188		25
Y10T24/44197	11	with specific means for attaching to flaccid strap or supporting strap	CPCONLY	Y10T24/44197		120
Y10T24/44205	12	On the inserted member	CPCONLY	Y10T24/44205		102
Y10T24/44214	11	having necked button sliding along length of closed, variable width loop	CPCONLY	Y10T24/44214		88
Y10T24/44222	9	having flaccid gripping member	CPCONLY	Y10T24/44222		112
Y10T24/44231	10	formed from elastic material	CPCONLY	Y10T24/44231		71
Y10T24/44239	9	Encircling gripping member including semirigid band and operator for tightening	CPCONLY	Y10T24/44239		141
Y10T24/44248	9	Encircling gripping member including semirigid band and means for adjusting girth	CPCONLY	Y10T24/44248		111
Y10T24/44256	9	with specifically shaped, nongripping, rigid structure for connecting independently operable clasps, clips, or support-clamps	CPCONLY	Y10T24/44256		138
Y10T24/44265	9	Gripping member face integral with or rigidly affixed to screw-driving portion	CPCONLY	Y10T24/44265		276
Y10T24/44274	9	having either discrete flaccid or thin, nonbiasing, integral, connecting hinge	CPCONLY	Y10T24/44274		130
Y10T24/44282	9	having equally spaced or continual gripping faces revolving about central axis	CPCONLY	Y10T24/44282		126
Y10T24/44291	9	including pivoted gripping member	CPCONLY	Y10T24/44291		334
Y10T24/44299	10	Pivoted member also slides	CPCONLY	Y10T24/44299		81
Y10T24/44308	11	Tapered face	CPCONLY	Y10T24/44308		26
Y10T24/44316	10	Pivoting gripping member either supports or coacts with sliding engaging face	CPCONLY	Y10T24/44316		27
Y10T24/44325	10	having three or more pivotally connected gripping members	CPCONLY	Y10T24/44325		81
Y10T24/44333	10	having toggle operator for moving	CPCONLY	Y10T24/44333		93
Y10T24/44342	10	having rigid linking arm pivotally connected to each gripping member	CPCONLY	Y10T24/44342		103
Y10T24/4435	11	with extended lever portion	CPCONLY	Y10T24/4435		41
Y10T24/44359	12	having lever end modified for attachment to support	CPCONLY	Y10T24/44359		34
Y10T24/44368	10	Pivoted gripping member applies camming force	CPCONLY	Y10T24/44368		336
Y10T24/44376	10	Spring or resiliently biased about pivot	CPCONLY	Y10T24/44376		273
Y10T24/44385	11	Distinct spring	CPCONLY	Y10T24/44385		77
Y10T24/44393	12	Attached solely by spring	CPCONLY	Y10T24/44393		110
Y10T24/44402	12	with operator for moving pivoted member	CPCONLY	Y10T24/44402		69
Y10T24/4441	13	Camming or wedging element	CPCONLY	Y10T24/4441		59
Y10T24/44419	14	Pivoted or rotated element	CPCONLY	Y10T24/44419		110
Y10T24/44427	12	with position locking-means for gripping members	CPCONLY	Y10T24/44427		111
Y10T24/44436	13	including pivoted arm	CPCONLY	Y10T24/44436		58
Y10T24/44444	12	having specific surface material or irregularity on or along engaging face	CPCONLY	Y10T24/44444		356
Y10T24/44453	12	having specific handle structure	CPCONLY	Y10T24/44453		121
Y10T24/44462	12	Coil spring	CPCONLY	Y10T24/44462		209
Y10T24/4447	13	having coil portion coaxial or parallel with pivotal axis	CPCONLY	Y10T24/4447		395
Y10T24/44479	12	Flat or leaf spring	CPCONLY	Y10T24/44479		243
Y10T24/44487	10	Closed by gravity or weight of structure-to-be-secured	CPCONLY	Y10T24/44487		57
Y10T24/44496	10	with operator means for moving pivoted member	CPCONLY	Y10T24/44496		106
Y10T24/44504	11	Threaded cylindrical rod and mating cavity	CPCONLY	Y10T24/44504		224
Y10T24/44513	11	Camming or wedging element	CPCONLY	Y10T24/44513		95
Y10T24/44521	12	Pivoted or rotated element	CPCONLY	Y10T24/44521		199
Y10T24/4453	10	with position locking-means for gripping members	CPCONLY	Y10T24/4453		423
Y10T24/44538	11	Integral locking-means	CPCONLY	Y10T24/44538		242
Y10T24/44547	10	having inserted and receiving interlocking engaging faces	CPCONLY	Y10T24/44547		151
Y10T24/44556	11	Resilient gripping member	CPCONLY	Y10T24/44556		72
Y10T24/44564	10	having specific surface material or irregularity on or along engaging face	CPCONLY	Y10T24/44564		341
Y10T24/44573	9	including track or way guided and retained gripping member	CPCONLY	Y10T24/44573		172
Y10T24/44581	10	Biased by distinct spring	CPCONLY	Y10T24/44581		262
Y10T24/4459	10	with operator for moving guided member	CPCONLY	Y10T24/4459		150
Y10T24/44598	11	Threaded cylindrical rod and mating cavity	CPCONLY	Y10T24/44598		232
Y10T24/44607	10	Track or way oblique to path of gripping member	CPCONLY	Y10T24/44607		96
Y10T24/44615	10	with position locking-means for gripping members	CPCONLY	Y10T24/44615		93
Y10T24/44624	11	Integral locking-means	CPCONLY	Y10T24/44624		61
Y10T24/44632	10	with specific mounting means for attaching to flaccid supporting structure or structure-to-be-secured	CPCONLY	Y10T24/44632		28
Y10T24/44641	9	having gripping member formed from, biased by, or mounted on resilient member	CPCONLY	Y10T24/44641		339
Y10T24/4465	10	Integrally combined, independently operable, diverse clasps, clips, or support-clamps	CPCONLY	Y10T24/4465		136
Y10T24/44658	10	with specific means for mounting to flaccid supporting structure or structure-to-be-secured	CPCONLY	Y10T24/44658		220
Y10T24/44667	11	Mounting means made entirely from integral wire portion of resilient gripping member	CPCONLY	Y10T24/44667		112
Y10T24/44675	12	Wire coiled about flaccid supporting structure	CPCONLY	Y10T24/44675		40
Y10T24/44684	10	with operator for moving biased engaging face	CPCONLY	Y10T24/44684		168
Y10T24/44692	11	Camming or wedging element	CPCONLY	Y10T24/44692		138
Y10T24/44701	12	Encircling sleeve type element	CPCONLY	Y10T24/44701		184
Y10T24/44709	12	Pivoted or rotated element	CPCONLY	Y10T24/44709		73
Y10T24/44718	13	Element pivots or rotates in plane parallel to plane bisecting opposed engaging faces	CPCONLY	Y10T24/44718		17
Y10T24/44726	13	Elongated element with pivot between cam and handle portions	CPCONLY	Y10T24/44726		50
Y10T24/44735	14	for moving engaging face of U-shaped gripping member	CPCONLY	Y10T24/44735		66
Y10T24/44744	10	with position locking-means for engaging faces	CPCONLY	Y10T24/44744		98
Y10T24/44752	11	Integral locking-means	CPCONLY	Y10T24/44752		485
Y10T24/44761	11	Pivoted lock member	CPCONLY	Y10T24/44761		44
Y10T24/44769	10	Opposed engaging faces on gripping member formed from single piece of resilient material	CPCONLY	Y10T24/44769		567
Y10T24/44778	11	Piece totally forms clasp, clip, or support-clamp and has shaped, wirelike, or bandlike configuration with uniform cross section throughout its length	CPCONLY	Y10T24/44778		413
Y10T24/44786	12	Opposed faces located in and bias towards common plane in nonuse position	CPCONLY	Y10T24/44786		113
Y10T24/44795	12	Resilient gripping member having tightly twisted portion	CPCONLY	Y10T24/44795		64
Y10T24/44803	12	Resilient gripping member having coiled portion	CPCONLY	Y10T24/44803		141
Y10T24/44812	13	Convolutions of coil form faces	CPCONLY	Y10T24/44812		65
Y10T24/44821	12	Relatively movable segments of resilient gripping member contact and cross in nonuse position	CPCONLY	Y10T24/44821		178
Y10T24/44829	13	Segments form opposed engaging faces	CPCONLY	Y10T24/44829		180
Y10T24/44838	14	having specific handle structure	CPCONLY	Y10T24/44838		24
Y10T24/44846	13	having specific handle structure	CPCONLY	Y10T24/44846		24
Y10T24/44855	12	Terminal end of resilient member having engagement or disengagement enhancing structural modifications	CPCONLY	Y10T24/44855		265
Y10T24/44863	12	having specific surface irregularity on or along engaging face	CPCONLY	Y10T24/44863		94
Y10T24/44872	11	having specific handle structure	CPCONLY	Y10T24/44872		152
Y10T24/4488	12	Movably attached to gripping member	CPCONLY	Y10T24/4488		21
Y10T24/44889	11	Interlocking faces	CPCONLY	Y10T24/44889		76
Y10T24/44897	11	with reinforcing member	CPCONLY	Y10T24/44897		79
Y10T24/44906	11	having specific surface irregularity on or along engaging face	CPCONLY	Y10T24/44906		399
Y10T24/44915	12	Corrugated or toothed face	CPCONLY	Y10T24/44915		343
Y10T24/44923	11	Clasp, clip, or support-clamp cut or shaped from a single sheet of resilient, uniformly thick, planar material	CPCONLY	Y10T24/44923		596
Y10T24/44932	10	having specific surface material or irregularity on or along engaging face	CPCONLY	Y10T24/44932		451
Y10T24/4494	10	having specific handle structure	CPCONLY	Y10T24/4494		110
Y10T24/44949	10	including resilient biasing wire	CPCONLY	Y10T24/44949		143
Y10T24/44957	11	Coiled wire	CPCONLY	Y10T24/44957		210
Y10T24/44966	9	having gripping member shifted by operator	CPCONLY	Y10T24/44966		81
Y10T24/44974	10	Threaded cylindrical rod and mating cavity	CPCONLY	Y10T24/44974		608
Y10T24/44983	9	formed from single rigid piece of material	CPCONLY	Y10T24/44983		257
Y10T24/44991	10	having specific surface irregularity on or along engaging face	CPCONLY	Y10T24/44991		73
Y10T24/45	8	Separable-fastener or required component thereof [e.g., projection and cavity to complete interlock]	CPCONLY	Y10T24/45		95
Y10T24/45005	9	with third detached member completing interlock [e.g., hook type]	CPCONLY	Y10T24/45005		102
Y10T24/4501	10	Quick connect or release [e.g., spring and detent]	CPCONLY	Y10T24/4501		135
Y10T24/45016	10	for jewelry	CPCONLY	Y10T24/45016		162
Y10T24/45021	10	including eyelet [e.g., shoes]	CPCONLY	Y10T24/45021		113
Y10T24/45026	10	for key holder	CPCONLY	Y10T24/45026		17
Y10T24/45031	10	for tire chain, strap, etc. [e.g., rotatable or sliding spring gate]	CPCONLY	Y10T24/45031		179
Y10T24/45037	10	for apparel and related accessories	CPCONLY	Y10T24/45037		98
Y10T24/45042	11	Button, button related	CPCONLY	Y10T24/45042		59
Y10T24/45047	12	Snap [e.g., key hole type]	CPCONLY	Y10T24/45047		37
Y10T24/45052	11	Post and receiver [e.g., pin and slot]	CPCONLY	Y10T24/45052		43
Y10T24/45058	11	Hook [e.g., within cavity]	CPCONLY	Y10T24/45058		53
Y10T24/45063	11	Belt, strap, etc. [e.g., buckle or snap fastener]	CPCONLY	Y10T24/45063		119
Y10T24/45068	11	Glove	CPCONLY	Y10T24/45068		28
Y10T24/45073	11	Purse, wallet, etc.	CPCONLY	Y10T24/45073		36
Y10T24/45079	10	Belt, strap, harness, etc.	CPCONLY	Y10T24/45079		90
Y10T24/45084	11	for safety belt buckle, strap, harness, etc.	CPCONLY	Y10T24/45084		148
Y10T24/45089	10	Sliding or rotating element	CPCONLY	Y10T24/45089		193
Y10T24/45094	11	Element having key slot	CPCONLY	Y10T24/45094		51
Y10T24/45099	10	Resilient element [e.g., snap type]	CPCONLY	Y10T24/45099		154
Y10T24/45105	11	for upholstery, panel, trim strip, etc. [e.g., spring biased]	CPCONLY	Y10T24/45105		148
Y10T24/4511	11	Link with pivoted gate	CPCONLY	Y10T24/4511		16
Y10T24/45115	10	Hook	CPCONLY	Y10T24/45115		35
Y10T24/4512	11	Snap with spring bias [e.g., gate]	CPCONLY	Y10T24/4512		53
Y10T24/45126	11	for connecting chains [e.g., opposed pivoted hook]	CPCONLY	Y10T24/45126		31
Y10T24/45131	11	for heavy load bearing device [e.g., chain, rope, cable, etc.]	CPCONLY	Y10T24/45131		22
Y10T24/45136	12	Haim, harness, whiffletree, rein, etc.	CPCONLY	Y10T24/45136		57
Y10T24/45141	10	for chain, rope, cable, etc.	CPCONLY	Y10T24/45141		17
Y10T24/45147	11	Coupler with sliding socket to complete interlock	CPCONLY	Y10T24/45147		31
Y10T24/45152	9	Each mating member having similarly shaped, sized, and operated interlocking or intermeshable face	CPCONLY	Y10T24/45152		125
Y10T24/45157	10	Zipper-type [e.g., slider]	CPCONLY	Y10T24/45157		77
Y10T24/45162	11	for garment [e.g., with ribs and grooves interlocking elements]	CPCONLY	Y10T24/45162		11
Y10T24/45168	11	for container [e.g., bag]	CPCONLY	Y10T24/45168		233
Y10T24/45173	10	Resilient element	CPCONLY	Y10T24/45173		57
Y10T24/45178	11	Snap [e.g., identical elements]	CPCONLY	Y10T24/45178		78
Y10T24/45183	10	Clasp [e.g., spring type]	CPCONLY	Y10T24/45183		35
Y10T24/45188	11	for jewelry [e.g., buckle type]	CPCONLY	Y10T24/45188		49
Y10T24/45194	11	for belt or strap	CPCONLY	Y10T24/45194		62
Y10T24/45199	10	Hook	CPCONLY	Y10T24/45199		36
Y10T24/45204	11	for belt, strap, etc. [e.g., with pivoted gate locking member]	CPCONLY	Y10T24/45204		31
Y10T24/45209	11	for apparel	CPCONLY	Y10T24/45209		33
Y10T24/45215	10	Slot and tab or tongue	CPCONLY	Y10T24/45215		73
Y10T24/4522	10	Sliding or rotating element	CPCONLY	Y10T24/4522		118
Y10T24/45225	9	including member having distinct formations and mating member selectively interlocking therewith	CPCONLY	Y10T24/45225		109
Y10T24/4523	10	Hook	CPCONLY	Y10T24/4523		83
Y10T24/45236	11	Multiple catch [e.g., with pivoted gate]	CPCONLY	Y10T24/45236		36
Y10T24/45241	10	Slot and tab or tongue	CPCONLY	Y10T24/45241		161
Y10T24/45246	11	having teeth or serrations [e.g., sliding with respect to each other]	CPCONLY	Y10T24/45246		101
Y10T24/45251	10	Resilient element [e.g., with spring]	CPCONLY	Y10T24/45251		82
Y10T24/45257	11	Snap with cavity	CPCONLY	Y10T24/45257		66
Y10T24/45262	10	Pin, post and receiver	CPCONLY	Y10T24/45262		174
Y10T24/45267	10	Notched clasp [e.g., with receiving slot]	CPCONLY	Y10T24/45267		52
Y10T24/45461	10	Interlocking portion actuated or released responsive to preselected condition [e.g., heat, pressure]	CPCONLY	Y10T24/45461		172
Y10T24/45466	10	having electric or fluid powered, actuation or release, of interlock	CPCONLY	Y10T24/45466		157
Y10T24/45471	10	Projection having movable connection between components thereof or variable configuration	CPCONLY	Y10T24/45471		39
Y10T24/45476	11	with additional, similar projection for engaging different cavity	CPCONLY	Y10T24/45476		62
Y10T24/45482	11	and operator therefor	CPCONLY	Y10T24/45482		99
Y10T24/45487	12	including camming or wedging element on projection member	CPCONLY	Y10T24/45487		119
Y10T24/45492	13	Pivotally attached element	CPCONLY	Y10T24/45492		18
Y10T24/45497	11	including pivotal connection between projection components	CPCONLY	Y10T24/45497		57
Y10T24/45503	12	Component slides relative to connection	CPCONLY	Y10T24/45503		30
Y10T24/45508	12	and spring or resilient extension biasing about pivot	CPCONLY	Y10T24/45508		70
Y10T24/45513	11	including slidably guided connection between nonself-biasing projection components	CPCONLY	Y10T24/45513		22
Y10T24/45518	12	and distinct spring biasing component	CPCONLY	Y10T24/45518		80
Y10T24/45524	11	including resiliently biased projection component or surface segment	CPCONLY	Y10T24/45524		203
Y10T24/45529	12	Requiring manual force applied against bias to interlock or disengage	CPCONLY	Y10T24/45529		379
Y10T24/45534	13	having connected leading edge and separated trailing arms	CPCONLY	Y10T24/45534		354
Y10T24/45539	12	Cooperating with cavity having side walls and axially biased component capping end	CPCONLY	Y10T24/45539		22
Y10T24/45545	12	forming total external surface of projection	CPCONLY	Y10T24/45545		208
Y10T24/4555	13	and encircling hollow central area	CPCONLY	Y10T24/4555		44
Y10T24/45555	14	having separate mounting means inserted into area	CPCONLY	Y10T24/45555		32
Y10T24/4556	15	Plastic deformation of means or surface required for mounting	CPCONLY	Y10T24/4556		74
Y10T24/45565	14	having separate mounting means encompassing cross section of projection	CPCONLY	Y10T24/45565		57
Y10T24/45571	14	having dome-shaped head and expansion slit along side	CPCONLY	Y10T24/45571		81
Y10T24/45576	15	and connected surface at tip of head	CPCONLY	Y10T24/45576		50
Y10T24/45581	13	having inserted end formed by oppositely biased surface segments	CPCONLY	Y10T24/45581		406
Y10T24/45586	13	Constructed from wire	CPCONLY	Y10T24/45586		69
Y10T24/45592	12	having both resiliently biased and rigid components forming external surface of projection	CPCONLY	Y10T24/45592		91
Y10T24/45597	10	Projection member including noninserted spring for engaging and pushing against receiving member	CPCONLY	Y10T24/45597		67
Y10T24/45602	10	Receiving member includes either movable connection between interlocking components or variable configuration cavity	CPCONLY	Y10T24/45602		75
Y10T24/45607	11	with additional cavity for engaging different projection	CPCONLY	Y10T24/45607		135
Y10T24/45613	12	having common means actuating or releasing interlocking components or surfaces	CPCONLY	Y10T24/45613		68
Y10T24/45618	13	and interlocking with independently associated or dissociated projection members	CPCONLY	Y10T24/45618		105
Y10T24/45623	11	and operator therefor	CPCONLY	Y10T24/45623		432
Y10T24/45628	12	for plural, oppositely shifting, similar interlocking components or segments	CPCONLY	Y10T24/45628		98
Y10T24/45634	13	Operator includes camming or wedging element	CPCONLY	Y10T24/45634		151
Y10T24/45639	12	including pivotally connected element on receiving member	CPCONLY	Y10T24/45639		75
Y10T24/45644	13	for shifting pivotally connected interlocking component	CPCONLY	Y10T24/45644		192
Y10T24/45649	14	Element and component pivot about same axis	CPCONLY	Y10T24/45649		30
Y10T24/45654	13	for shifting slidably connected and guided, nonself-biasing interlocking component	CPCONLY	Y10T24/45654		91
Y10T24/4566	12	including slidably connected and guided element on receiving member	CPCONLY	Y10T24/4566		70
Y10T24/45665	13	for shifting pivotally connected interlocking component	CPCONLY	Y10T24/45665		205
Y10T24/4567	13	for shifting slidably connected and guided, nonself-biasing, interlocking component	CPCONLY	Y10T24/4567		126
Y10T24/45675	11	having pivotally connected interlocking component	CPCONLY	Y10T24/45675		82
Y10T24/45681	12	Blocking removal of formation on projection from complementary formation on side wall of cavity	CPCONLY	Y10T24/45681		59
Y10T24/45686	12	and position locking-means therefor	CPCONLY	Y10T24/45686		147
Y10T24/45691	12	and relatively movable handle therefor	CPCONLY	Y10T24/45691		30
Y10T24/45696	12	Requiring manual force thereon to interlock or disengage	CPCONLY	Y10T24/45696		198
Y10T24/45702	13	Plural, oppositely shifting, similar interlocking components	CPCONLY	Y10T24/45702		70
Y10T24/45707	13	having aperture therein alignable with parallel access opening	CPCONLY	Y10T24/45707		48
Y10T24/45712	13	having interlocking portion thereof housed continuously within cavity	CPCONLY	Y10T24/45712		96
Y10T24/45717	11	having cavity with side walls and axially biased component capping end	CPCONLY	Y10T24/45717		59
Y10T24/45723	11	having slidably connected, nonself-biasing interlocking component	CPCONLY	Y10T24/45723		50
Y10T24/45728	12	Blocking removal of formation on projection from complementary formation on side wall of cavity	CPCONLY	Y10T24/45728		42
Y10T24/45733	12	and position locking-means therefor	CPCONLY	Y10T24/45733		36
Y10T24/45738	12	and relatively movable handle therefor	CPCONLY	Y10T24/45738		12
Y10T24/45743	12	Requiring manual force thereon to interlock or disengage	CPCONLY	Y10T24/45743		136
Y10T24/45749	13	Plural, oppositely shifting, similar interlocking components	CPCONLY	Y10T24/45749		43
Y10T24/45754	13	having closed aperture therethrough alignable with parallel access opening	CPCONLY	Y10T24/45754		67
Y10T24/45759	11	having flaccid component defining access opening of cavity	CPCONLY	Y10T24/45759		151
Y10T24/45764	12	Component formed solely by flaccid cord	CPCONLY	Y10T24/45764		100
Y10T24/4577	12	with nonflaccid component	CPCONLY	Y10T24/4577		19
Y10T24/45775	11	having resiliently biased interlocking component or segment	CPCONLY	Y10T24/45775		484
Y10T24/4578	12	Cavity or projection rotates about axis of cavity to dissociate	CPCONLY	Y10T24/4578		75
Y10T24/45785	12	Requiring manual force applied against bias to interlock or disengage	CPCONLY	Y10T24/45785		155
Y10T24/45791	13	and partially blocking separate, nonresilient access opening of cavity	CPCONLY	Y10T24/45791		90
Y10T24/45796	12	and closed elongated access opening for guiding transverse projection travel after insertion	CPCONLY	Y10T24/45796		68
Y10T24/45801	13	Nonresilient walls define opening	CPCONLY	Y10T24/45801		115
Y10T24/45806	13	formed from wire	CPCONLY	Y10T24/45806		93
Y10T24/45812	12	and access opening with gapped perimeter for allowing movement of noninserted projection support therepast	CPCONLY	Y10T24/45812		145
Y10T24/45817	13	Cavity constructed solely from wire	CPCONLY	Y10T24/45817		24
Y10T24/45822	12	Partially blocking separate, nonresilient, access opening of cavity	CPCONLY	Y10T24/45822		125
Y10T24/45827	13	and bodily shifted into or out of interlock location by manual force thereon	CPCONLY	Y10T24/45827		16
Y10T24/45832	13	formed from wire	CPCONLY	Y10T24/45832		115
Y10T24/45838	14	having curved or bent engaging section conforming to contour of projection	CPCONLY	Y10T24/45838		80
Y10T24/45843	15	Similar, distinct sections	CPCONLY	Y10T24/45843		52
Y10T24/45848	14	having distinct sections engaging projection at spaced points	CPCONLY	Y10T24/45848		143
Y10T24/45853	12	including separate, nonprojection-engaging spring for biasing	CPCONLY	Y10T24/45853		16
Y10T24/45859	12	Biased component or segment entirely formed from wire	CPCONLY	Y10T24/45859		93
Y10T24/45864	12	having portion of cavity deformed during mounting	CPCONLY	Y10T24/45864		47
Y10T24/45869	13	and cooperating with separate mounting component	CPCONLY	Y10T24/45869		106
Y10T24/45874	12	having axially extending expansion slit along side of cavity	CPCONLY	Y10T24/45874		243
Y10T24/4588	10	Means for mounting projection or cavity portion	CPCONLY	Y10T24/4588		130
Y10T24/45885	11	Allows bodily movement facilitating interlock	CPCONLY	Y10T24/45885		97
Y10T24/4589	12	About pivotal connection	CPCONLY	Y10T24/4589		144
Y10T24/45895	12	Includes resilient component separate from portion	CPCONLY	Y10T24/45895		83
Y10T24/45901	11	Allows relocation of portion	CPCONLY	Y10T24/45901		111
Y10T24/45906	11	having component of means permanently deformed during mounting operation	CPCONLY	Y10T24/45906		129
Y10T24/45911	12	and formed from or fixedly attached to projection or cavity portion	CPCONLY	Y10T24/45911		93
Y10T24/45916	13	Cooperates with detached component of means	CPCONLY	Y10T24/45916		212
Y10T24/45921	13	having shape facilitating impaling of mounting surface	CPCONLY	Y10T24/45921		185
Y10T24/45927	12	and inserted into or through cavity or projection	CPCONLY	Y10T24/45927		136
Y10T24/45932	12	and encircling cavity or projection	CPCONLY	Y10T24/45932		128
Y10T24/45937	11	Consisting of thermally fusible substance	CPCONLY	Y10T24/45937		56
Y10T24/45942	11	having threaded formation	CPCONLY	Y10T24/45942		192
Y10T24/45948	11	having specific structure for cooperating with stitching	CPCONLY	Y10T24/45948		363
Y10T24/45953	11	having shape facilitating impaling of mounting surface	CPCONLY	Y10T24/45953		123
Y10T24/45958	10	Plural distinct cavities or projections	CPCONLY	Y10T24/45958		233
Y10T24/45963	11	Hook type	CPCONLY	Y10T24/45963		257
Y10T24/45969	10	Hook-shaped projection member passing through cavity	CPCONLY	Y10T24/45969		409
Y10T24/45974	11	formed from single piece of sheet metal	CPCONLY	Y10T24/45974		250
Y10T24/45979	11	formed solely from wire	CPCONLY	Y10T24/45979		246
Y10T24/45984	10	Cavity having specific shape	CPCONLY	Y10T24/45984		155
Y10T24/4599	11	including closed elongated access opening for guiding transverse projection travel after insertion	CPCONLY	Y10T24/4599		249
Y10T24/45995	11	having access opening with gapped perimeter for allowing movement of noninserted projection support therepast	CPCONLY	Y10T24/45995		141
Y10T24/46	8	Pin or separate essential cooperating device therefor	CPCONLY	Y10T24/46		140
Y10T24/4602	9	with separately operable, manually releasable, nonpenetrating means for mounting [e.g., drapery hook]	CPCONLY	Y10T24/4602		114
Y10T24/4604	9	having distinct guiding, holding, or protecting means for penetrated portion	CPCONLY	Y10T24/4604		38
Y10T24/4605	10	Means detachable from or flaccidly connected to pin [e.g., hatpin type]	CPCONLY	Y10T24/4605		83
Y10T24/4607	11	for pin having plural penetrating portions	CPCONLY	Y10T24/4607		59
Y10T24/4609	11	including relatively movable guiding, holding, or protecting components or surfaces	CPCONLY	Y10T24/4609		21
Y10T24/4611	12	having operator for moving holding component or surface	CPCONLY	Y10T24/4611		70
Y10T24/4613	13	Moves pivoting holding component	CPCONLY	Y10T24/4613		24
Y10T24/4614	13	Moves slidably guided, nonself-biasing, holding component	CPCONLY	Y10T24/4614		81
Y10T24/4616	12	having pierceable [e.g., cork] or naturally resilient [e.g., rubber] surfaces	CPCONLY	Y10T24/4616		83
Y10T24/4618	12	with pivotal connection therebetween	CPCONLY	Y10T24/4618		75
Y10T24/462	12	with slidable connection between nonself-biasing components	CPCONLY	Y10T24/462		38
Y10T24/4621	12	having resiliently biased component or surface	CPCONLY	Y10T24/4621		63
Y10T24/4623	13	Coiled about longitudinal axis of held portion	CPCONLY	Y10T24/4623		27
Y10T24/4625	13	and aperture therein alignable with another spaced aperture of means	CPCONLY	Y10T24/4625		68
Y10T24/4627	13	and nonresilient structure for guiding portion thereto	CPCONLY	Y10T24/4627		113
Y10T24/4629	11	including structure for cooperating with formation [e.g., cavity] formed on penetrating portion	CPCONLY	Y10T24/4629		64
Y10T24/463	10	for pin having plural penetrating portions	CPCONLY	Y10T24/463		169
Y10T24/4632	11	Each independently movable towards and into cooperation with means	CPCONLY	Y10T24/4632		48
Y10T24/4634	10	including relatively movable guiding, holding, or protecting components or surfaces	CPCONLY	Y10T24/4634		23
Y10T24/4636	11	with connection allowing component to revolve about axis of held penetrating portion	CPCONLY	Y10T24/4636		87
Y10T24/4638	11	with pivotal connection therebetween	CPCONLY	Y10T24/4638		78
Y10T24/4639	12	having position locking means therefor	CPCONLY	Y10T24/4639		67
Y10T24/4641	12	Spring or resiliently biased	CPCONLY	Y10T24/4641		25
Y10T24/4643	11	with slidable connection between nonself-biasing components	CPCONLY	Y10T24/4643		23
Y10T24/4645	12	Component slides parallel to axis of held penetrating portion	CPCONLY	Y10T24/4645		50
Y10T24/4646	11	Means engages formation formed on penetrating portion	CPCONLY	Y10T24/4646		23
Y10T24/4648	11	having nonresilient and resilient components	CPCONLY	Y10T24/4648		50
Y10T24/465	11	Means formed from single resilient wire	CPCONLY	Y10T24/465		37
Y10T24/4652	11	Means formed from resilient sheet metal	CPCONLY	Y10T24/4652		60
Y10T24/4654	10	with independent, spaced, intermediate connections, or formations [e.g., coils], about which portion or means move	CPCONLY	Y10T24/4654		48
Y10T24/4655	11	Includes slidable connection	CPCONLY	Y10T24/4655		38
Y10T24/4657	10	with pivotal connection between penetrating portion and means	CPCONLY	Y10T24/4657		284
Y10T24/4659	11	Connection also permits sliding movement	CPCONLY	Y10T24/4659		20
Y10T24/4661	11	Resiliently biased about connection	CPCONLY	Y10T24/4661		52
Y10T24/4663	10	with slidable connection intermediate penetrating portion and means	CPCONLY	Y10T24/4663		56
Y10T24/4664	10	having resilient bridging structure between portion and means	CPCONLY	Y10T24/4664		30
Y10T24/4666	11	Means includes structure for cooperating with formation [e.g., cavity] formed on portion	CPCONLY	Y10T24/4666		49
Y10T24/4668	11	and penetrating portion formed from wire	CPCONLY	Y10T24/4668		148
Y10T24/467	12	Bridging structure includes elongated nonwire element	CPCONLY	Y10T24/467		86
Y10T24/4671	12	Wire also forms coiled bridging structure about which portion moves	CPCONLY	Y10T24/4671		154
Y10T24/4673	13	including distinct device for cooperating with coil	CPCONLY	Y10T24/4673		53
Y10T24/4675	13	having means also formed from same wire	CPCONLY	Y10T24/4675		117
Y10T24/4677	9	with cavity for guiding structure-to-be-secured towards penetrating portion [e.g., stocking support]	CPCONLY	Y10T24/4677		60
Y10T24/4679	9	having penetrating portion retractable or of changeable length	CPCONLY	Y10T24/4679		66
Y10T24/468	9	having interconnected distinct penetrating portions	CPCONLY	Y10T24/468		133
Y10T24/4682	10	Connection allows movement therebetween	CPCONLY	Y10T24/4682		90
Y10T24/4684	11	Slidable connection	CPCONLY	Y10T24/4684		41
Y10T24/4686	11	Resilient connection	CPCONLY	Y10T24/4686		109
Y10T24/4688	10	formed from common wire	CPCONLY	Y10T24/4688		49
Y10T24/4689	11	and pointing in same direction	CPCONLY	Y10T24/4689		122
Y10T24/4691	9	Penetrating portion includes relatively movable structure for resisting extraction	CPCONLY	Y10T24/4691		120
Y10T24/4693	9	having specific wire penetrating portion	CPCONLY	Y10T24/4693		54
Y10T24/4695	10	Wire curved or bent	CPCONLY	Y10T24/4695		121
Y10T24/4696	9	having distinct head structure	CPCONLY	Y10T24/4696		159
Y10T24/4698	10	Movably connected to penetrating portion	CPCONLY	Y10T24/4698		57
Y10T24/47	8	Strap-end-attaching devices	CPCONLY	Y10T24/47		528
Y10T24/4709	9	Bendable sheet material	CPCONLY	Y10T24/4709		352
Y10T24/4718	9	Watch pintle connected	CPCONLY	Y10T24/4718		278
Y10T24/4727	9	Webbing to tube [lawn chair]	CPCONLY	Y10T24/4727		76
Y10T24/4736	9	Buckle connected	CPCONLY	Y10T24/4736		296
Y10T24/4745	9	End clasp	CPCONLY	Y10T24/4745		125
Y10T24/4755	9	Hook	CPCONLY	Y10T24/4755		305
Y10T24/4764	9	Ring-loop	CPCONLY	Y10T24/4764		184
Y10T24/4773	9	Cargo tiedown	CPCONLY	Y10T24/4773		145
Y10T24/4782	9	Watch strap	CPCONLY	Y10T24/4782		458
Y10T24/4791	9	Enlarged end epoxy	CPCONLY	Y10T24/4791		56
Y10T24/48	8	Pivoted edge stays	CPCONLY	Y10T24/48		136
Y10T24/49	8	Fastener destructively secured by reshaping distortion force [e.g., ductile fastener]	CPCONLY	Y10T24/49		237
Y10T24/492	9	Distorted structure having shape facilitating impaling	CPCONLY	Y10T24/492		20
Y10T24/493	10	and distinct fastener structure cooperating with impaled structure	CPCONLY	Y10T24/493		65
Y10T24/495	11	Detached cooperating structure	CPCONLY	Y10T24/495		69
Y10T24/497	10	including plural impaling elements	CPCONLY	Y10T24/497		142
Y10T24/498	11	Elements form single aperture [e.g., split shank type]	CPCONLY	Y10T24/498		59
Y10T24/50	8	Readily interlocking, two-part fastener requiring either destructive or tool disengagement	CPCONLY	Y10T24/50		283
Y10T24/505	9	including additional fastener structure linking parts	CPCONLY	Y10T24/505		83
Y10T24/51	8	Hanger on portable article support for manual attachment thereof to overhead support [e.g., drapery hook]	CPCONLY	Y10T24/51		209
Y10T29/00	7	Metal working	CPCONLY	Y10T29/00		1
Y10T29/10	8	Battery-grid making	CPCONLY	Y10T29/10		477
Y10T29/11	8	Bias [i.e. , helically] cutting of tubular stock	CPCONLY	Y10T29/11		30
Y10T29/1106	9	including orbital cutter	CPCONLY	Y10T29/1106		6
Y10T29/1113	10	within stock support	CPCONLY	Y10T29/1113		3
Y10T29/1119	10	with orbiting strip accumulator	CPCONLY	Y10T29/1119		4
Y10T29/1125	9	including means to inflate stock	CPCONLY	Y10T29/1125		6
Y10T29/1131	9	with means to feed stock along support or mandrel	CPCONLY	Y10T29/1131		16
Y10T29/1138	10	Single means produces compound motion	CPCONLY	Y10T29/1138		26
Y10T29/1144	11	Endless belt drive means	CPCONLY	Y10T29/1144		8
Y10T29/115	10	Axially	CPCONLY	Y10T29/115		12
Y10T29/1156	10	Rotatably	CPCONLY	Y10T29/1156		12
Y10T29/1163	9	with means to rotate and store stock supply	CPCONLY	Y10T29/1163		22
Y10T29/1169	10	Axis of rotation parallel to support or mandrel	CPCONLY	Y10T29/1169		13
Y10T29/1175	9	with means for arcuate shift of mandrel	CPCONLY	Y10T29/1175		6
Y10T29/1181	9	including means to handle produced strip or web	CPCONLY	Y10T29/1181		29
Y10T29/1188	10	with common adjustment for cutter	CPCONLY	Y10T29/1188		6
Y10T29/1194	9	Method	CPCONLY	Y10T29/1194		22
Y10T29/12	8	Buckle making	CPCONLY	Y10T29/12		126
Y10T29/13	8	Button-fastener making	CPCONLY	Y10T29/13		43
Y10T29/14	8	Shredding metal or metal wool article making	CPCONLY	Y10T29/14		23
Y10T29/142	9	Metal wool making	CPCONLY	Y10T29/142		11
Y10T29/143	10	Shaving or longitudinal cutting	CPCONLY	Y10T29/143		80
Y10T29/145	11	Soap-pad making	CPCONLY	Y10T29/145		3
Y10T29/147	9	Metal wool bundling	CPCONLY	Y10T29/147		81
Y10T29/148	10	Soap-pad making	CPCONLY	Y10T29/148		12
Y10T29/15	8	Cord heddle making	CPCONLY	Y10T29/15		44
Y10T29/16	8	Cotter-pin making	CPCONLY	Y10T29/16		33
Y10T29/17	8	Crankshaft making apparatus	CPCONLY	Y10T29/17		175
Y10T29/18	8	Expanded metal making	CPCONLY	Y10T29/18		463
Y10T29/185	9	by use of reciprocating perforator	CPCONLY	Y10T29/185		282
Y10T29/19	8	Eyebolt or hook making	CPCONLY	Y10T29/19		86
Y10T29/20	8	Fence barb making	CPCONLY	Y10T29/20		71
Y10T29/203	9	by use of reciprocating cutter or die	CPCONLY	Y10T29/203		60
Y10T29/207	9	by use of rotary cutter or die	CPCONLY	Y10T29/207		28
Y10T29/21	8	Finger-ring forming or sizing	CPCONLY	Y10T29/21		113
Y10T29/22	8	Fishhook making	CPCONLY	Y10T29/22		32
Y10T29/23	8	Gem and jewel setting	CPCONLY	Y10T29/23		335
Y10T29/24	8	Hinge making or assembling	CPCONLY	Y10T29/24		375
Y10T29/25	8	Lacing-stud making	CPCONLY	Y10T29/25		26
Y10T29/26	8	Paper-fastener making	CPCONLY	Y10T29/26		49
Y10T29/27	8	Plow or cultivator iron making	CPCONLY	Y10T29/27		163
Y10T29/28	8	Puddlers balls making	CPCONLY	Y10T29/28		40
Y10T29/29	8	Railway-chair making	CPCONLY	Y10T29/29		82
Y10T29/30	8	Foil or other thin sheet-metal making or treating	CPCONLY	Y10T29/30		148
Y10T29/301	9	Method	CPCONLY	Y10T29/301		233
Y10T29/302	10	Clad or other composite foil or thin metal making	CPCONLY	Y10T29/302		195
Y10T29/303	10	with assembling or disassembling of a pack	CPCONLY	Y10T29/303		105
Y10T29/304	11	Using transitory solid cover material	CPCONLY	Y10T29/304		34
Y10T29/305	11	including bond prevention treatment	CPCONLY	Y10T29/305		45
Y10T29/306	11	Disassembling of a pack	CPCONLY	Y10T29/306		44
Y10T29/307	10	by shaving or longitudinal cutting	CPCONLY	Y10T29/307		20
Y10T29/308	10	Using transitory material	CPCONLY	Y10T29/308		40
Y10T29/309	9	Means for opening or separating a pack	CPCONLY	Y10T29/309		79
Y10T29/31	8	Spectacle-frame making	CPCONLY	Y10T29/31		195
Y10T29/32	8	Spiral cutting of flat stock	CPCONLY	Y10T29/32		36
Y10T29/33	8	Stereotype-plate finishing	CPCONLY	Y10T29/33		243
Y10T29/34	8	Means for forming clench-tongue [eg, for tieband]	CPCONLY	Y10T29/34		140
Y10T29/35	8	Tire upsetting, with cutting, punching, etc.	CPCONLY	Y10T29/35		58
Y10T29/36	8	toothed-cylinder making apparatus [e.g. , texture working cylinder]	CPCONLY	Y10T29/36		23
Y10T29/37	8	Impeller making apparatus	CPCONLY	Y10T29/37		157
Y10T29/38	8	Type finishing and grooving	CPCONLY	Y10T29/38		67
Y10T29/39	8	Venetian blind assembling	CPCONLY	Y10T29/39		131
Y10T29/40	8	Umbrella-frame making	CPCONLY	Y10T29/40		61
Y10T29/42	8	Piezoelectric device making	CPCONLY	Y10T29/42		3610
Y10T29/43	8	Electric condenser making	CPCONLY	Y10T29/43		891
Y10T29/435	9	Solid dielectric type	CPCONLY	Y10T29/435		2169
Y10T29/44	8	Filing	CPCONLY	Y10T29/44		551
Y10T29/442	9	of key article	CPCONLY	Y10T29/442		21
Y10T29/444	9	Continuous band type	CPCONLY	Y10T29/444		45
Y10T29/446	9	Reciprocating type	CPCONLY	Y10T29/446		36
Y10T29/448	9	File-blank stripper	CPCONLY	Y10T29/448		15
Y10T29/45	8	Scale remover or preventor	CPCONLY	Y10T29/45		95
Y10T29/4506	9	for hollow workpiece	CPCONLY	Y10T29/4506		108
Y10T29/4511	10	Interior surface	CPCONLY	Y10T29/4511		60
Y10T29/4517	9	Rolling deformation or deflection	CPCONLY	Y10T29/4517		100
Y10T29/4522	10	for wire or rod	CPCONLY	Y10T29/4522		22
Y10T29/4528	9	with rotary head	CPCONLY	Y10T29/4528		161
Y10T29/4533	9	Fluid impingement	CPCONLY	Y10T29/4533		26
Y10T29/4539	10	with heater	CPCONLY	Y10T29/4539		20
Y10T29/4544	10	Liquid jet	CPCONLY	Y10T29/4544		90
Y10T29/455	10	Airblast	CPCONLY	Y10T29/455		21
Y10T29/4556	9	Chainer	CPCONLY	Y10T29/4556		18
Y10T29/4561	9	Scraper or scalper	CPCONLY	Y10T29/4561		71
Y10T29/4567	9	Brush type	CPCONLY	Y10T29/4567		58
Y10T29/4572	9	Mechanically powered operator	CPCONLY	Y10T29/4572		11
Y10T29/4578	10	Tack or needle type	CPCONLY	Y10T29/4578		40
Y10T29/4583	10	Hammer	CPCONLY	Y10T29/4583		29
Y10T29/4589	10	Blade or chisel	CPCONLY	Y10T29/4589		27
Y10T29/4594	9	Hand tool	CPCONLY	Y10T29/4594		50
Y10T29/46	8	Burning in, wearing in, or oil burnishing	CPCONLY	Y10T29/46		83
Y10T29/47	8	Burnishing	CPCONLY	Y10T29/47		913
Y10T29/471	9	of water laid fibrous article [e.g., paper]	CPCONLY	Y10T29/471		39
Y10T29/473	10	Heated burnishing member	CPCONLY	Y10T29/473		12
Y10T29/474	11	Burnishing tool reciprocates across work surface	CPCONLY	Y10T29/474		36
Y10T29/476	9	Continuous feed	CPCONLY	Y10T29/476		86
Y10T29/477	9	of gear article	CPCONLY	Y10T29/477		98
Y10T29/479	9	by shot peening or blasting	CPCONLY	Y10T29/479		187
Y10T29/48	8	Upholstered article making	CPCONLY	Y10T29/48		168
Y10T29/481	9	Method	CPCONLY	Y10T29/481		477
Y10T29/482	9	Tufting	CPCONLY	Y10T29/482		35
Y10T29/483	10	with means to clench fastener	CPCONLY	Y10T29/483		25
Y10T29/484	10	with means to insert guide pin or fastener	CPCONLY	Y10T29/484		33
Y10T29/486	9	Cover stretching	CPCONLY	Y10T29/486		93
Y10T29/487	9	Edge-roll forming	CPCONLY	Y10T29/487		23
Y10T29/488	9	form or holder	CPCONLY	Y10T29/488		55
Y10T29/489	10	with follower	CPCONLY	Y10T29/489		18
Y10T29/49	8	Method of mechanical manufacture	CPCONLY	Y10T29/49		1585
Y10T29/49002	9	Electrical device making	CPCONLY	Y10T29/49002		4761
Y10T29/49004	10	including measuring or testing of device or component part	CPCONLY	Y10T29/49004		1487
Y10T29/49005	10	Acoustic transducer	CPCONLY	Y10T29/49005		1258
Y10T29/49007	10	Indicating transducer	CPCONLY	Y10T29/49007		483
Y10T29/49009	10	Dynamoelectric machine	CPCONLY	Y10T29/49009		3640
Y10T29/49011	11	Commutator or slip ring assembly	CPCONLY	Y10T29/49011		843
Y10T29/49012	11	Rotor	CPCONLY	Y10T29/49012		2134
Y10T29/49014	10	Superconductor	CPCONLY	Y10T29/49014		1098
Y10T29/49016	10	Antenna or wave energy "plumbing" making	CPCONLY	Y10T29/49016		1885
Y10T29/49018	11	with other electrical component	CPCONLY	Y10T29/49018		663
Y10T29/4902	10	Electromagnet, transformer or inductor	CPCONLY	Y10T29/4902		2408
Y10T29/49021	11	Magnetic recording reproducing transducer [e.g., tape head, core, etc.]	CPCONLY	Y10T29/49021		399
Y10T29/49023	12	including dissassembly step	CPCONLY	Y10T29/49023		46
Y10T29/49025	12	Making disc drive	CPCONLY	Y10T29/49025		571
Y10T29/49027	12	Mounting preformed head/core onto other structure	CPCONLY	Y10T29/49027		275
Y10T29/49028	13	Mounting multitrack head	CPCONLY	Y10T29/49028		38
Y10T29/4903	13	with bonding	CPCONLY	Y10T29/4903		228
Y10T29/49032	12	Fabricating head structure or component thereof	CPCONLY	Y10T29/49032		787
Y10T29/49034	13	Treating to affect magnetic properties	CPCONLY	Y10T29/49034		237
Y10T29/49036	13	including measuring or testing	CPCONLY	Y10T29/49036		211
Y10T29/49037	14	Using reference point/surface to facilitate measuring	CPCONLY	Y10T29/49037		129
Y10T29/49039	14	with dual gap materials	CPCONLY	Y10T29/49039		172
Y10T29/49041	14	with significant slider/housing shaping or treating	CPCONLY	Y10T29/49041		617
Y10T29/49043	14	Depositing magnetic layer or coating	CPCONLY	Y10T29/49043		659
Y10T29/49044	15	Plural magnetic deposition layers	CPCONLY	Y10T29/49044		773
Y10T29/49046	15	with etching or machining of magnetic material	CPCONLY	Y10T29/49046		755
Y10T29/49048	13	Machining magnetic material [e.g., grinding, etching, polishing]	CPCONLY	Y10T29/49048		845
Y10T29/4905	14	Employing workholding means	CPCONLY	Y10T29/4905		62
Y10T29/49052	14	by etching	CPCONLY	Y10T29/49052		598
Y10T29/49053	13	Multitrack heads having integral holding means	CPCONLY	Y10T29/49053		38
Y10T29/49055	13	with bond/laminating preformed parts, at least two magnetic	CPCONLY	Y10T29/49055		225
Y10T29/49057	14	Using glass bonding material	CPCONLY	Y10T29/49057		162
Y10T29/49059	14	with work positioning means	CPCONLY	Y10T29/49059		40
Y10T29/4906	13	Providing winding	CPCONLY	Y10T29/4906		155
Y10T29/49062	14	Multilayered winding	CPCONLY	Y10T29/49062		61
Y10T29/49064	14	by coating	CPCONLY	Y10T29/49064		128
Y10T29/49066	14	Preformed winding	CPCONLY	Y10T29/49066		49
Y10T29/49067	13	Specified diverse magnetic materials	CPCONLY	Y10T29/49067		62
Y10T29/49069	11	Data storage inductor or core	CPCONLY	Y10T29/49069		610
Y10T29/49071	11	by winding or coiling	CPCONLY	Y10T29/49071		2335
Y10T29/49073	11	by assembling coil and core	CPCONLY	Y10T29/49073		1520
Y10T29/49075	11	including permanent magnet or core	CPCONLY	Y10T29/49075		612
Y10T29/49076	12	From comminuted material	CPCONLY	Y10T29/49076		291
Y10T29/49078	12	Laminated	CPCONLY	Y10T29/49078		1028
Y10T29/4908	11	Acoustic transducer	CPCONLY	Y10T29/4908		245
Y10T29/49082	10	Resistor making	CPCONLY	Y10T29/49082		809
Y10T29/49083	11	Heater type	CPCONLY	Y10T29/49083		1123
Y10T29/49085	11	Thermally variable	CPCONLY	Y10T29/49085		375
Y10T29/49087	11	with envelope or housing	CPCONLY	Y10T29/49087		385
Y10T29/49089	12	Filling with powdered insulation	CPCONLY	Y10T29/49089		118
Y10T29/49091	13	with direct compression of powdered insulation	CPCONLY	Y10T29/49091		98
Y10T29/49092	12	Powdering the insulation	CPCONLY	Y10T29/49092		25
Y10T29/49094	13	by oxidation	CPCONLY	Y10T29/49094		23
Y10T29/49096	12	with winding	CPCONLY	Y10T29/49096		140
Y10T29/49098	12	Applying terminal	CPCONLY	Y10T29/49098		309
Y10T29/49099	11	Coating resistive material on a base	CPCONLY	Y10T29/49099		812
Y10T29/49101	11	Applying terminal	CPCONLY	Y10T29/49101		431
Y10T29/49103	11	Strain gauge making	CPCONLY	Y10T29/49103		281
Y10T29/49105	10	Switch making	CPCONLY	Y10T29/49105		1495
Y10T29/49107	10	Fuse making	CPCONLY	Y10T29/49107		391
Y10T29/49108	10	Electric battery cell making	CPCONLY	Y10T29/49108		3519
Y10T29/4911	11	including sealing	CPCONLY	Y10T29/4911		1263
Y10T29/49112	11	including laminating of indefinite length material	CPCONLY	Y10T29/49112		367
Y10T29/49114	11	including adhesively bonding	CPCONLY	Y10T29/49114		560
Y10T29/49115	11	including coating or impregnating	CPCONLY	Y10T29/49115		1774
Y10T29/49117	10	Conductor or circuit manufacturing	CPCONLY	Y10T29/49117		4960
Y10T29/49119	11	Brush	CPCONLY	Y10T29/49119		168
Y10T29/49121	11	Beam lead frame or beam lead device	CPCONLY	Y10T29/49121		1404
Y10T29/49123	11	Co-axial cable	CPCONLY	Y10T29/49123		512
Y10T29/49124	11	On flat or curved insulated base, e.g., printed circuit, etc.	CPCONLY	Y10T29/49124		1732
Y10T29/49126	12	Assembling bases	CPCONLY	Y10T29/49126		2865
Y10T29/49128	12	Assembling formed circuit to base	CPCONLY	Y10T29/49128		1667
Y10T29/4913	12	Assembling to base an electrical component, e.g., capacitor, etc.	CPCONLY	Y10T29/4913		4143
Y10T29/49131	13	by utilizing optical sighting device	CPCONLY	Y10T29/49131		576
Y10T29/49133	13	with component orienting	CPCONLY	Y10T29/49133		715
Y10T29/49135	14	and shaping, e.g., cutting or bending, etc.	CPCONLY	Y10T29/49135		253
Y10T29/49137	14	Different components	CPCONLY	Y10T29/49137		169
Y10T29/49139	13	by inserting component lead or terminal into base aperture	CPCONLY	Y10T29/49139		639
Y10T29/4914	14	with deforming of lead or terminal	CPCONLY	Y10T29/4914		170
Y10T29/49142	15	including metal fusion	CPCONLY	Y10T29/49142		151
Y10T29/49144	13	by metal fusion	CPCONLY	Y10T29/49144		2142
Y10T29/49146	13	with encapsulating, e.g., potting, etc.	CPCONLY	Y10T29/49146		1163
Y10T29/49147	12	Assembling terminal to base	CPCONLY	Y10T29/49147		1150
Y10T29/49149	13	by metal fusion bonding	CPCONLY	Y10T29/49149		855
Y10T29/49151	13	by deforming or shaping	CPCONLY	Y10T29/49151		268
Y10T29/49153	14	with shaping or forcing terminal into base aperture	CPCONLY	Y10T29/49153		374
Y10T29/49155	12	Manufacturing circuit on or in base	CPCONLY	Y10T29/49155		4171
Y10T29/49156	13	with selective destruction of conductive paths	CPCONLY	Y10T29/49156		1155
Y10T29/49158	13	with molding of insulated base	CPCONLY	Y10T29/49158		430
Y10T29/4916	14	Simultaneous circuit manufacturing	CPCONLY	Y10T29/4916		146
Y10T29/49162	13	by using wire as conductive path	CPCONLY	Y10T29/49162		449
Y10T29/49163	13	with sintering of base	CPCONLY	Y10T29/49163		268
Y10T29/49165	13	by forming conductive walled aperture in base	CPCONLY	Y10T29/49165		2286
Y10T29/49167	14	with deforming of conductive path	CPCONLY	Y10T29/49167		162
Y10T29/49169	11	Assembling electrical component directly to terminal or elongated conductor	CPCONLY	Y10T29/49169		1268
Y10T29/49171	12	with encapsulating	CPCONLY	Y10T29/49171		460
Y10T29/49172	13	by molding of insulating material	CPCONLY	Y10T29/49172		348
Y10T29/49174	11	Assembling terminal to elongated conductor	CPCONLY	Y10T29/49174		1025
Y10T29/49176	12	with molding of electrically insulating material	CPCONLY	Y10T29/49176		310
Y10T29/49178	13	by shrinking of cover	CPCONLY	Y10T29/49178		76
Y10T29/49179	12	by metal fusion bonding	CPCONLY	Y10T29/49179		420
Y10T29/49181	12	by deforming	CPCONLY	Y10T29/49181		451
Y10T29/49183	13	of ferrule about conductor and terminal	CPCONLY	Y10T29/49183		155
Y10T29/49185	13	of terminal	CPCONLY	Y10T29/49185		475
Y10T29/49187	14	with forming eyelet from elongated conductor	CPCONLY	Y10T29/49187		27
Y10T29/49188	14	with penetrating portion	CPCONLY	Y10T29/49188		47
Y10T29/4919	15	Through insulation	CPCONLY	Y10T29/4919		155
Y10T29/49192	14	with insulation removal	CPCONLY	Y10T29/49192		176
Y10T29/49194	11	Assembling elongated conductors, e.g., splicing, etc.	CPCONLY	Y10T29/49194		640
Y10T29/49195	12	with end-to-end orienting	CPCONLY	Y10T29/49195		234
Y10T29/49197	13	including fluid evacuating or pressurizing	CPCONLY	Y10T29/49197		54
Y10T29/49199	13	including deforming of joining bridge	CPCONLY	Y10T29/49199		114
Y10T29/49201	12	with overlapping orienting	CPCONLY	Y10T29/49201		237
Y10T29/49202	13	including oppositely facing end orienting	CPCONLY	Y10T29/49202		57
Y10T29/49204	11	Contact or terminal manufacturing	CPCONLY	Y10T29/49204		1904
Y10T29/49206	12	by powder metallurgy	CPCONLY	Y10T29/49206		116
Y10T29/49208	12	by assembling plural parts	CPCONLY	Y10T29/49208		1107
Y10T29/4921	13	with bonding	CPCONLY	Y10T29/4921		304
Y10T29/49211	14	of fused material	CPCONLY	Y10T29/49211		187
Y10T29/49213	15	Metal	CPCONLY	Y10T29/49213		403
Y10T29/49215	16	by impregnating a porous mass	CPCONLY	Y10T29/49215		31
Y10T29/49217	13	by elastic joining	CPCONLY	Y10T29/49217		125
Y10T29/49218	13	with deforming	CPCONLY	Y10T29/49218		649
Y10T29/4922	13	with molding of insulation	CPCONLY	Y10T29/4922		433
Y10T29/49222	13	forming array of contacts or terminals	CPCONLY	Y10T29/49222		723
Y10T29/49224	12	with coating	CPCONLY	Y10T29/49224		355
Y10T29/49226	10	Electret making	CPCONLY	Y10T29/49226		82
Y10T29/49227	10	Insulator making	CPCONLY	Y10T29/49227		339
Y10T29/49229	9	Prime mover or fluid pump making	CPCONLY	Y10T29/49229		501
Y10T29/49231	10	I.C. [internal combustion] engine making	CPCONLY	Y10T29/49231		493
Y10T29/49233	11	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/49233		266
Y10T29/49234	11	Rotary or radial engine making	CPCONLY	Y10T29/49234		130
Y10T29/49236	10	Fluid pump or compressor making	CPCONLY	Y10T29/49236		755
Y10T29/49238	11	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/49238		250
Y10T29/4924	11	Scroll or peristaltic type	CPCONLY	Y10T29/4924		184
Y10T29/49242	11	Screw or gear type, e.g., Moineau type	CPCONLY	Y10T29/49242		150
Y10T29/49243	11	Centrifugal type	CPCONLY	Y10T29/49243		140
Y10T29/49245	11	Vane type or other rotary, e.g., fan	CPCONLY	Y10T29/49245		314
Y10T29/49247	10	Valve lifter making	CPCONLY	Y10T29/49247		57
Y10T29/49249	10	Piston making	CPCONLY	Y10T29/49249		322
Y10T29/4925	11	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/4925		60
Y10T29/49252	11	Multi-element piston making	CPCONLY	Y10T29/49252		138
Y10T29/49254	12	Utilizing a high energy beam, e.g., laser, electron beam	CPCONLY	Y10T29/49254		29
Y10T29/49256	11	with assembly or composite article making	CPCONLY	Y10T29/49256		275
Y10T29/49258	12	with thermal barrier or heat flow provision	CPCONLY	Y10T29/49258		35
Y10T29/49259	12	with fiber reinforced structure	CPCONLY	Y10T29/49259		28
Y10T29/49261	12	by composite casting or molding	CPCONLY	Y10T29/49261		81
Y10T29/49263	12	by coating or cladding	CPCONLY	Y10T29/49263		78
Y10T29/49265	11	Ring groove forming or finishing	CPCONLY	Y10T29/49265		92
Y10T29/49266	11	Gudgeon pin, wrist pin, piston pin, or boss therefor	CPCONLY	Y10T29/49266		70
Y10T29/49268	11	with other attaching provision for connecting rod	CPCONLY	Y10T29/49268		14
Y10T29/4927	10	Cylinder, cylinder head or engine valve sleeve making	CPCONLY	Y10T29/4927		376
Y10T29/49272	11	with liner, coating, or sleeve	CPCONLY	Y10T29/49272		322
Y10T29/49274	10	Piston ring or piston packing making	CPCONLY	Y10T29/49274		209
Y10T29/49275	11	including forging or hammering	CPCONLY	Y10T29/49275		36
Y10T29/49277	11	including casting or molding	CPCONLY	Y10T29/49277		52
Y10T29/49279	11	including rolling or die forming, e.g., drawing, punching	CPCONLY	Y10T29/49279		83
Y10T29/49281	11	including coating or plating	CPCONLY	Y10T29/49281		79
Y10T29/49282	11	including grinding or honing	CPCONLY	Y10T29/49282		61
Y10T29/49284	11	including machining or angular cutting	CPCONLY	Y10T29/49284		177
Y10T29/49286	10	Crankshaft making	CPCONLY	Y10T29/49286		275
Y10T29/49288	10	Connecting rod making	CPCONLY	Y10T29/49288		192
Y10T29/4929	11	including metallurgical bonding	CPCONLY	Y10T29/4929		30
Y10T29/49291	11	including metal forging or die shaping	CPCONLY	Y10T29/49291		61
Y10T29/49293	10	Camshaft making	CPCONLY	Y10T29/49293		310
Y10T29/49295	10	Push rod or rocker arm making	CPCONLY	Y10T29/49295		138
Y10T29/49297	10	Seal or packing making	CPCONLY	Y10T29/49297		326
Y10T29/49298	10	Poppet or I.C. engine valve or valve seat making	CPCONLY	Y10T29/49298		161
Y10T29/493	11	Valve guide making	CPCONLY	Y10T29/493		43
Y10T29/49302	11	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/49302		56
Y10T29/49304	11	Valve tappet making	CPCONLY	Y10T29/49304		131
Y10T29/49306	11	Valve seat making	CPCONLY	Y10T29/49306		153
Y10T29/49307	11	Composite or hollow valve stem or head making	CPCONLY	Y10T29/49307		125
Y10T29/49309	12	including forging	CPCONLY	Y10T29/49309		72
Y10T29/49311	12	including extruding	CPCONLY	Y10T29/49311		39
Y10T29/49313	12	including casting	CPCONLY	Y10T29/49313		25
Y10T29/49314	11	with assembly or composite article making	CPCONLY	Y10T29/49314		211
Y10T29/49316	9	Impeller making	CPCONLY	Y10T29/49316		640
Y10T29/49318	10	Repairing or disassembling	CPCONLY	Y10T29/49318		980
Y10T29/4932	10	Turbomachine making	CPCONLY	Y10T29/4932		940
Y10T29/49321	11	Assembling individual fluid flow interacting members, e.g., blades, vanes, buckets, on rotary support member	CPCONLY	Y10T29/49321		957
Y10T29/49323	11	Assembling fluid flow directing devices, e.g., stators, diaphragms, nozzles	CPCONLY	Y10T29/49323		545
Y10T29/49325	11	Shaping integrally bladed rotor	CPCONLY	Y10T29/49325		205
Y10T29/49327	10	Axial blower or fan	CPCONLY	Y10T29/49327		137
Y10T29/49329	10	Centrifugal blower or fan	CPCONLY	Y10T29/49329		288
Y10T29/4933	10	Fluid coupling device	CPCONLY	Y10T29/4933		150
Y10T29/49332	10	Propeller making	CPCONLY	Y10T29/49332		343
Y10T29/49334	11	Utilizing hollow tube blank	CPCONLY	Y10T29/49334		153
Y10T29/49336	10	Blade making	CPCONLY	Y10T29/49336		948
Y10T29/49337	11	Composite blade	CPCONLY	Y10T29/49337		530
Y10T29/49339	11	Hollow blade	CPCONLY	Y10T29/49339		351
Y10T29/49341	12	with cooling passage	CPCONLY	Y10T29/49341		315
Y10T29/49343	13	Passage contains tubular insert	CPCONLY	Y10T29/49343		46
Y10T29/49345	9	Catalytic device making	CPCONLY	Y10T29/49345		552
Y10T29/49346	9	Rocket or jet device making	CPCONLY	Y10T29/49346		325
Y10T29/49348	9	Burner, torch or metallurgical lance making	CPCONLY	Y10T29/49348		222
Y10T29/4935	9	Heat exchanger or boiler making	CPCONLY	Y10T29/4935		1834
Y10T29/49352	10	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/49352		406
Y10T29/49353	10	Heat pipe device making	CPCONLY	Y10T29/49353		487
Y10T29/49355	10	Solar energy device making	CPCONLY	Y10T29/49355		402
Y10T29/49357	10	Regenerator or recuperator making	CPCONLY	Y10T29/49357		133
Y10T29/49359	10	Cooling apparatus making, e.g., air conditioner, refrigerator	CPCONLY	Y10T29/49359		543
Y10T29/49361	10	Tube inside tube	CPCONLY	Y10T29/49361		200
Y10T29/49362	10	Tube wound about tube	CPCONLY	Y10T29/49362		56
Y10T29/49364	10	Tube joined to flat sheet longitudinally, i.e., tube sheet	CPCONLY	Y10T29/49364		157
Y10T29/49366	10	Sheet joined to sheet	CPCONLY	Y10T29/49366		425
Y10T29/49368	11	with inserted tubes	CPCONLY	Y10T29/49368		91
Y10T29/49369	11	Utilizing bond inhibiting material	CPCONLY	Y10T29/49369		38
Y10T29/49371	12	with subsequent fluid expansion	CPCONLY	Y10T29/49371		175
Y10T29/49373	10	Tube joint and tube plate structure	CPCONLY	Y10T29/49373		617
Y10T29/49375	11	including conduit expansion or inflation	CPCONLY	Y10T29/49375		209
Y10T29/49377	10	Tube with heat transfer means	CPCONLY	Y10T29/49377		178
Y10T29/49378	11	Finned tube	CPCONLY	Y10T29/49378		646
Y10T29/4938	12	Common fin traverses plurality of tubes	CPCONLY	Y10T29/4938		291
Y10T29/49382	12	Helically finned	CPCONLY	Y10T29/49382		273
Y10T29/49384	12	Internally finned	CPCONLY	Y10T29/49384		159
Y10T29/49385	12	Made from unitary workpiece, i.e., no assembly	CPCONLY	Y10T29/49385		83
Y10T29/49387	10	Boiler making	CPCONLY	Y10T29/49387		246
Y10T29/49389	10	Header or manifold making	CPCONLY	Y10T29/49389		294
Y10T29/49391	10	Tube making or reforming	CPCONLY	Y10T29/49391		430
Y10T29/49393	10	with metallurgical bonding	CPCONLY	Y10T29/49393		393
Y10T29/49394	9	Accumulator making	CPCONLY	Y10T29/49394		82
Y10T29/49396	9	Condenser, evaporator or vaporizer making	CPCONLY	Y10T29/49396		168
Y10T29/49398	9	Muffler, manifold or exhaust pipe making	CPCONLY	Y10T29/49398		374
Y10T29/494	9	Fluidic or fluid actuated device making	CPCONLY	Y10T29/494		418
Y10T29/49401	9	Fluid pattern dispersing device making, e.g., ink jet	CPCONLY	Y10T29/49401		1291
Y10T29/49403	9	Tapping device making	CPCONLY	Y10T29/49403		67
Y10T29/49405	9	Valve or choke making	CPCONLY	Y10T29/49405		369
Y10T29/49407	10	Repairing, converting, servicing or salvaging	CPCONLY	Y10T29/49407		130
Y10T29/49409	10	Valve seat forming	CPCONLY	Y10T29/49409		181
Y10T29/4941	10	Valve stem or tire valve making	CPCONLY	Y10T29/4941		62
Y10T29/49412	10	with assembly, disassembly or composite article making	CPCONLY	Y10T29/49412		572
Y10T29/49414	11	Joining plural semi-circular components	CPCONLY	Y10T29/49414		43
Y10T29/49416	11	with material shaping or cutting	CPCONLY	Y10T29/49416		98
Y10T29/49417	12	including molding or casting	CPCONLY	Y10T29/49417		150
Y10T29/49419	12	including machining or drilling	CPCONLY	Y10T29/49419		125
Y10T29/49421	12	including metallurgical bonding	CPCONLY	Y10T29/49421		143
Y10T29/49423	12	including metal deforming	CPCONLY	Y10T29/49423		150
Y10T29/49425	11	including metallurgical bonding	CPCONLY	Y10T29/49425		76
Y10T29/49426	10	including metal shaping and diverse operation	CPCONLY	Y10T29/49426		150
Y10T29/49428	9	Gas and water specific plumbing component making	CPCONLY	Y10T29/49428		674
Y10T29/4943	10	Plumbing fixture making	CPCONLY	Y10T29/4943		115
Y10T29/49432	10	Nozzle making	CPCONLY	Y10T29/49432		296
Y10T29/49433	11	Sprayer	CPCONLY	Y10T29/49433		149
Y10T29/49435	10	Flexible conduit or fitting therefor	CPCONLY	Y10T29/49435		154
Y10T29/49437	10	Flue connector device making	CPCONLY	Y10T29/49437		18
Y10T29/49439	10	Trap making	CPCONLY	Y10T29/49439		34
Y10T29/4944	10	Return connector device making	CPCONLY	Y10T29/4944		83
Y10T29/49442	10	T-shaped fitting making	CPCONLY	Y10T29/49442		194
Y10T29/49444	10	Elbow or L-shaped fitting making	CPCONLY	Y10T29/49444		174
Y10T29/49446	10	Ferrule making or reforming	CPCONLY	Y10T29/49446		107
Y10T29/49448	9	Agricultural device making	CPCONLY	Y10T29/49448		177
Y10T29/49449	10	Traction apparatus, e.g., for tractor	CPCONLY	Y10T29/49449		69
Y10T29/49451	10	Harvester guard	CPCONLY	Y10T29/49451		27
Y10T29/49453	9	Pulley making	CPCONLY	Y10T29/49453		103
Y10T29/49455	10	Assembly	CPCONLY	Y10T29/49455		76
Y10T29/49456	11	with shaping	CPCONLY	Y10T29/49456		102
Y10T29/49458	10	Disc splitting to form pulley rim groove	CPCONLY	Y10T29/49458		39
Y10T29/4946	10	Groove forming in sheet metal pulley rim	CPCONLY	Y10T29/4946		94
Y10T29/49462	9	Gear making	CPCONLY	Y10T29/49462		183
Y10T29/49464	10	Assembling of gear into force transmitting device	CPCONLY	Y10T29/49464		342
Y10T29/49465	10	Gear mounting	CPCONLY	Y10T29/49465		197
Y10T29/49467	10	Gear shaping	CPCONLY	Y10T29/49467		203
Y10T29/49469	11	Worm gear	CPCONLY	Y10T29/49469		65
Y10T29/49471	11	Roll forming	CPCONLY	Y10T29/49471		177
Y10T29/49472	11	Punching or stamping	CPCONLY	Y10T29/49472		68
Y10T29/49474	11	Die-press shaping	CPCONLY	Y10T29/49474		222
Y10T29/49476	11	Gear tooth cutting	CPCONLY	Y10T29/49476		161
Y10T29/49478	11	Gear blank making	CPCONLY	Y10T29/49478		72
Y10T29/4948	11	with specific gear material	CPCONLY	Y10T29/4948		111
Y10T29/49481	9	Wheel making	CPCONLY	Y10T29/49481		181
Y10T29/49483	10	Railway or trolley wheel making	CPCONLY	Y10T29/49483		100
Y10T29/49485	11	Multiple part or composite	CPCONLY	Y10T29/49485		18
Y10T29/49487	12	with axle or hub	CPCONLY	Y10T29/49487		72
Y10T29/49488	10	Steering wheel	CPCONLY	Y10T29/49488		175
Y10T29/4949	10	Material winding, e.g., reel, spool	CPCONLY	Y10T29/4949		59
Y10T29/49492	10	Land wheel	CPCONLY	Y10T29/49492		131
Y10T29/49494	11	Assembling tire to wheel body	CPCONLY	Y10T29/49494		121
Y10T29/49496	11	Disc type wheel	CPCONLY	Y10T29/49496		53
Y10T29/49497	12	Assembling wheel disc to rim and hub	CPCONLY	Y10T29/49497		41
Y10T29/49499	12	Assembling wheel disc to rim	CPCONLY	Y10T29/49499		108
Y10T29/49501	13	with disc shaping	CPCONLY	Y10T29/49501		78
Y10T29/49503	12	Integral rim and disc making	CPCONLY	Y10T29/49503		88
Y10T29/49504	12	Disc shaping	CPCONLY	Y10T29/49504		135
Y10T29/49506	11	Tensioned spoke type wheel making	CPCONLY	Y10T29/49506		54
Y10T29/49508	12	Tensioning all spokes simultaneously	CPCONLY	Y10T29/49508		37
Y10T29/4951	12	Tensioning spokes in series	CPCONLY	Y10T29/4951		21
Y10T29/49512	12	Tensioning spokes individually	CPCONLY	Y10T29/49512		70
Y10T29/49513	11	Compression, e.g., nontension, spoke type wheel making	CPCONLY	Y10T29/49513		48
Y10T29/49515	12	Joining spokes to rim and hub	CPCONLY	Y10T29/49515		54
Y10T29/49517	12	Joining spokes to rim	CPCONLY	Y10T29/49517		108
Y10T29/49519	12	Joining spokes to hub	CPCONLY	Y10T29/49519		30
Y10T29/4952	12	Making plural spokes from a single blank	CPCONLY	Y10T29/4952		61
Y10T29/49522	12	Individual spoke making	CPCONLY	Y10T29/49522		33
Y10T29/49524	11	Rim making	CPCONLY	Y10T29/49524		113
Y10T29/49526	12	with assembling	CPCONLY	Y10T29/49526		63
Y10T29/49528	13	Demountable rim making	CPCONLY	Y10T29/49528		44
Y10T29/49529	12	Die-press shaping	CPCONLY	Y10T29/49529		87
Y10T29/49531	12	Roller forming	CPCONLY	Y10T29/49531		96
Y10T29/49533	11	Hub making	CPCONLY	Y10T29/49533		54
Y10T29/49535	12	with assembling	CPCONLY	Y10T29/49535		180
Y10T29/49536	12	Hub shaping	CPCONLY	Y10T29/49536		119
Y10T29/49538	11	Tyre making	CPCONLY	Y10T29/49538		60
Y10T29/4954	11	Wheel trim making, e.g., wheel cover, hubcap	CPCONLY	Y10T29/4954		77
Y10T29/49542	12	with means for retaining trim member on wheel	CPCONLY	Y10T29/49542		86
Y10T29/49544	9	Roller making	CPCONLY	Y10T29/49544		133
Y10T29/49545	10	Repairing or servicing	CPCONLY	Y10T29/49545		68
Y10T29/49547	10	Assembling preformed components	CPCONLY	Y10T29/49547		112
Y10T29/49549	11	Work contacting surface element assembled to core	CPCONLY	Y10T29/49549		234
Y10T29/49551	12	Work contacting surface wound about core	CPCONLY	Y10T29/49551		72
Y10T29/49552	12	with prestressing of component by heat differential, e.g., shrink, fit	CPCONLY	Y10T29/49552		60
Y10T29/49554	12	Work contacting surface having annular axial sections	CPCONLY	Y10T29/49554		71
Y10T29/49556	11	Work contacting surface element assembled to end support members	CPCONLY	Y10T29/49556		93
Y10T29/49558	11	Includes securing removable cover on roller	CPCONLY	Y10T29/49558		71
Y10T29/4956	10	Fabricating and shaping roller work contacting surface element	CPCONLY	Y10T29/4956		226
Y10T29/49561	11	toothed roller	CPCONLY	Y10T29/49561		46
Y10T29/49563	11	with coating or casting about a core	CPCONLY	Y10T29/49563		263
Y10T29/49565	10	One-piece roller making	CPCONLY	Y10T29/49565		54
Y10T29/49567	9	Dental appliance making	CPCONLY	Y10T29/49567		258
Y10T29/49568	10	Orthodontic device making	CPCONLY	Y10T29/49568		106
Y10T29/4957	9	Sound device making	CPCONLY	Y10T29/4957		121
Y10T29/49572	10	Hearing aid component making	CPCONLY	Y10T29/49572		54
Y10T29/49574	10	Musical instrument or tuning fork making	CPCONLY	Y10T29/49574		144
Y10T29/49575	10	including diaphragm or support therefor	CPCONLY	Y10T29/49575		49
Y10T29/49577	10	Phonograph component making	CPCONLY	Y10T29/49577		32
Y10T29/49579	9	Watch or clock making	CPCONLY	Y10T29/49579		154
Y10T29/49581	10	having arbor, pinion, or balance	CPCONLY	Y10T29/49581		91
Y10T29/49583	10	having indicia, face, or dial	CPCONLY	Y10T29/49583		51
Y10T29/49584	10	having case, cover, or back	CPCONLY	Y10T29/49584		93
Y10T29/49586	10	having crown, stem, or pendent	CPCONLY	Y10T29/49586		42
Y10T29/49588	9	Jewelry or locket making	CPCONLY	Y10T29/49588		150
Y10T29/4959	10	Human adornment device making	CPCONLY	Y10T29/4959		253
Y10T29/49591	11	Bracelet making	CPCONLY	Y10T29/49591		106
Y10T29/49593	11	Finger ring making	CPCONLY	Y10T29/49593		182
Y10T29/49595	10	Latch, clasp, or fastener component making	CPCONLY	Y10T29/49595		93
Y10T29/49597	10	Ornamental stock making	CPCONLY	Y10T29/49597		116
Y10T29/49599	9	Knob or knob shank making	CPCONLY	Y10T29/49599		105
Y10T29/496	9	Multiperforated metal article making	CPCONLY	Y10T29/496		500
Y10T29/49602	10	Coil wound wall screen	CPCONLY	Y10T29/49602		131
Y10T29/49604	10	Filter	CPCONLY	Y10T29/49604		394
Y10T29/49606	9	Turnbuckle making	CPCONLY	Y10T29/49606		102
Y10T29/49607	9	Spring-head clip making	CPCONLY	Y10T29/49607		28
Y10T29/49609	9	Spring making	CPCONLY	Y10T29/49609		438
Y10T29/49611	10	for vehicle or clutch	CPCONLY	Y10T29/49611		185
Y10T29/49613	10	for human comfort	CPCONLY	Y10T29/49613		83
Y10T29/49615	10	Resilient shock or vibration absorber utility	CPCONLY	Y10T29/49615		97
Y10T29/49616	9	Structural member making	CPCONLY	Y10T29/49616		512
Y10T29/49618	10	Restoring existing member, e.g., reinforcing, repairing	CPCONLY	Y10T29/49618		120
Y10T29/4962	10	Grille making	CPCONLY	Y10T29/4962		292
Y10T29/49622	10	Vehicular structural member making	CPCONLY	Y10T29/49622		1612
Y10T29/49623	10	Static structure, e.g., a building component	CPCONLY	Y10T29/49623		534
Y10T29/49625	11	Openwork, e.g., a truss, joist, frame, lattice-type or box beam	CPCONLY	Y10T29/49625		337
Y10T29/49627	12	Frame component	CPCONLY	Y10T29/49627		209
Y10T29/49629	11	Panel	CPCONLY	Y10T29/49629		373
Y10T29/49631	11	Columnar member	CPCONLY	Y10T29/49631		178
Y10T29/49632	11	Metal reinforcement member for nonmetallic, e.g., concrete, structural element	CPCONLY	Y10T29/49632		159
Y10T29/49634	11	Beam or girder	CPCONLY	Y10T29/49634		235
Y10T29/49636	9	Process for making bearing or component thereof	CPCONLY	Y10T29/49636		233
Y10T29/49638	10	Repairing	CPCONLY	Y10T29/49638		99
Y10T29/49639	10	Fluid bearing	CPCONLY	Y10T29/49639		230
Y10T29/49641	10	Linear bearing	CPCONLY	Y10T29/49641		163
Y10T29/49643	10	Rotary bearing	CPCONLY	Y10T29/49643		122
Y10T29/49645	11	Thrust bearing	CPCONLY	Y10T29/49645		105
Y10T29/49647	11	Plain bearing	CPCONLY	Y10T29/49647		93
Y10T29/49648	12	Self-adjusting or self-aligning, including ball and socket type, bearing and component making	CPCONLY	Y10T29/49648		92
Y10T29/4965	13	Deforming socket to secure ball	CPCONLY	Y10T29/4965		51
Y10T29/49652	14	Die-press shaping	CPCONLY	Y10T29/49652		33
Y10T29/49654	15	having liner	CPCONLY	Y10T29/49654		21
Y10T29/49655	13	having liner	CPCONLY	Y10T29/49655		73
Y10T29/49657	13	Socket making	CPCONLY	Y10T29/49657		46
Y10T29/49659	14	by molding or casting	CPCONLY	Y10T29/49659		52
Y10T29/49661	14	Nonmetallic socket	CPCONLY	Y10T29/49661		45
Y10T29/49663	14	by assembling	CPCONLY	Y10T29/49663		83
Y10T29/49664	13	Ball making	CPCONLY	Y10T29/49664		40
Y10T29/49666	14	with metallurgical bonding	CPCONLY	Y10T29/49666		18
Y10T29/49668	12	Sleeve or bushing making	CPCONLY	Y10T29/49668		247
Y10T29/4967	13	Nonmetallic	CPCONLY	Y10T29/4967		113
Y10T29/49671	13	Strip or blank material shaping	CPCONLY	Y10T29/49671		72
Y10T29/49673	14	Die-press shaping	CPCONLY	Y10T29/49673		79
Y10T29/49675	15	having inner lining layer	CPCONLY	Y10T29/49675		102
Y10T29/49677	13	having liner	CPCONLY	Y10T29/49677		205
Y10T29/49679	11	Anti-friction bearing or component thereof	CPCONLY	Y10T29/49679		157
Y10T29/4968	12	Assembling of race, cage, and rolling anti-friction members	CPCONLY	Y10T29/4968		170
Y10T29/49682	12	Assembling of race and rolling anti-friction members	CPCONLY	Y10T29/49682		231
Y10T29/49684	13	with race making	CPCONLY	Y10T29/49684		193
Y10T29/49686	12	Assembling of cage and rolling anti-friction members	CPCONLY	Y10T29/49686		66
Y10T29/49687	13	with cage making	CPCONLY	Y10T29/49687		72
Y10T29/49689	12	Race making	CPCONLY	Y10T29/49689		328
Y10T29/49691	12	Cage making	CPCONLY	Y10T29/49691		275
Y10T29/49693	12	Roller making	CPCONLY	Y10T29/49693		49
Y10T29/49694	12	Ball making	CPCONLY	Y10T29/49694		71
Y10T29/49696	10	Mounting	CPCONLY	Y10T29/49696		725
Y10T29/49698	10	Demounting	CPCONLY	Y10T29/49698		127
Y10T29/497	10	Pre-usage process, e.g., preloading, aligning	CPCONLY	Y10T29/497		213
Y10T29/49702	10	Lubricating	CPCONLY	Y10T29/49702		333
Y10T29/49703	10	Sealing	CPCONLY	Y10T29/49703		131
Y10T29/49705	10	Coating or casting	CPCONLY	Y10T29/49705		300
Y10T29/49707	10	Bearing surface treatment	CPCONLY	Y10T29/49707		172
Y10T29/49709	10	Specific metallic composition	CPCONLY	Y10T29/49709		212
Y10T29/4971	10	Nonmetallic bearing element	CPCONLY	Y10T29/4971		94
Y10T29/49712	9	Ball making	CPCONLY	Y10T29/49712		79
Y10T29/49714	10	Hollow ball	CPCONLY	Y10T29/49714		35
Y10T29/49716	9	Converting	CPCONLY	Y10T29/49716		1486
Y10T29/49718	9	Repairing	CPCONLY	Y10T29/49718		705
Y10T29/49719	10	Seal or element thereof	CPCONLY	Y10T29/49719		216
Y10T29/49721	10	with disassembling	CPCONLY	Y10T29/49721		472
Y10T29/49723	11	including reconditioning of part	CPCONLY	Y10T29/49723		155
Y10T29/49725	12	by shaping	CPCONLY	Y10T29/49725		71
Y10T29/49726	13	Removing material	CPCONLY	Y10T29/49726		291
Y10T29/49728	14	and by a metallurgical operation, e.g., welding, diffusion bonding, casting	CPCONLY	Y10T29/49728		159
Y10T29/4973	11	Replacing of defective part	CPCONLY	Y10T29/4973		1195
Y10T29/49732	10	by attaching repair preform, e.g., remaking, restoring, or patching	CPCONLY	Y10T29/49732		548
Y10T29/49734	11	and removing damaged material	CPCONLY	Y10T29/49734		330
Y10T29/49735	12	Mechanically attaching preform with separate fastener	CPCONLY	Y10T29/49735		127
Y10T29/49737	12	Metallurgically attaching preform	CPCONLY	Y10T29/49737		273
Y10T29/49739	11	Mechanically attaching preform by separate fastener	CPCONLY	Y10T29/49739		100
Y10T29/49741	12	Screw threaded fastener	CPCONLY	Y10T29/49741		105
Y10T29/49742	11	Metallurgically attaching preform	CPCONLY	Y10T29/49742		216
Y10T29/49744	11	Screw threaded preform	CPCONLY	Y10T29/49744		74
Y10T29/49746	10	by applying fluent material, e.g., coating, casting	CPCONLY	Y10T29/49746		472
Y10T29/49748	10	by shaping, e.g., bending, extruding, turning, etc.	CPCONLY	Y10T29/49748		253
Y10T29/4975	11	including heating	CPCONLY	Y10T29/4975		109
Y10T29/49751	9	Scrap recovering or utilizing	CPCONLY	Y10T29/49751		117
Y10T29/49753	10	Metalworking to consolidate scrap	CPCONLY	Y10T29/49753		82
Y10T29/49755	10	Separating one material from another	CPCONLY	Y10T29/49755		158
Y10T29/49757	11	by burning or heating	CPCONLY	Y10T29/49757		60
Y10T29/49758	9	During simulated operation or operating conditions	CPCONLY	Y10T29/49758		182
Y10T29/4976	10	Temperature	CPCONLY	Y10T29/4976		59
Y10T29/49762	9	Center locating and shaping	CPCONLY	Y10T29/49762		124
Y10T29/49764	9	with testing or indicating	CPCONLY	Y10T29/49764		727
Y10T29/49766	10	torquing threaded assemblage or determining torque herein	CPCONLY	Y10T29/49766		185
Y10T29/49767	11	Determining relative number of threaded member rotations	CPCONLY	Y10T29/49767		59
Y10T29/49769	10	Using optical instrument [excludes mere human eyeballing]	CPCONLY	Y10T29/49769		331
Y10T29/49771	10	Quantitative measuring or gauging	CPCONLY	Y10T29/49771		737
Y10T29/49773	11	by radioactive tracing	CPCONLY	Y10T29/49773		18
Y10T29/49774	11	by vibratory or oscillatory movement	CPCONLY	Y10T29/49774		61
Y10T29/49776	11	Pressure, force, or weight determining	CPCONLY	Y10T29/49776		252
Y10T29/49778	10	with aligning, guiding, or instruction	CPCONLY	Y10T29/49778		501
Y10T29/4978	11	Assisting assembly or disassembly	CPCONLY	Y10T29/4978		698
Y10T29/49782	9	of a slide fastener	CPCONLY	Y10T29/49782		364
Y10T29/49783	10	of slider	CPCONLY	Y10T29/49783		127
Y10T29/49785	10	of interlocking element	CPCONLY	Y10T29/49785		283
Y10T29/49787	9	Obtaining plural composite product pieces from preassembled workpieces	CPCONLY	Y10T29/49787		199
Y10T29/49789	9	Obtaining plural product pieces from unitary workpiece	CPCONLY	Y10T29/49789		643
Y10T29/4979	10	Breaking through weakened portion	CPCONLY	Y10T29/4979		498
Y10T29/49792	10	Dividing through modified portion	CPCONLY	Y10T29/49792		293
Y10T29/49794	10	Dividing on common outline	CPCONLY	Y10T29/49794		274
Y10T29/49796	10	Coacting pieces	CPCONLY	Y10T29/49796		424
Y10T29/49798	10	Dividing sequentially from leading end, e.g., by cutting or breaking	CPCONLY	Y10T29/49798		1026
Y10T29/49799	9	Providing transitory integral holding or handling portion	CPCONLY	Y10T29/49799		437
Y10T29/49801	9	Shaping fiber or fibered material	CPCONLY	Y10T29/49801		563
Y10T29/49803	9	Magnetically shaping	CPCONLY	Y10T29/49803		201
Y10T29/49805	9	Shaping by direct application of fluent pressure	CPCONLY	Y10T29/49805		1176
Y10T29/49806	10	Explosively shaping	CPCONLY	Y10T29/49806		300
Y10T29/49808	9	Shaping container end to encapsulate material	CPCONLY	Y10T29/49808		162
Y10T29/4981	9	Utilizing transitory attached element or associated separate material	CPCONLY	Y10T29/4981		1335
Y10T29/49812	10	Temporary protective coating, impregnation, or cast layer	CPCONLY	Y10T29/49812		631
Y10T29/49813	9	Shaping mating parts for reassembly in different positions	CPCONLY	Y10T29/49813		108
Y10T29/49815	9	Disassembling	CPCONLY	Y10T29/49815		1045
Y10T29/49817	10	with other than ancillary treating or assembling	CPCONLY	Y10T29/49817		566
Y10T29/49819	10	with conveying of work or disassembled work part	CPCONLY	Y10T29/49819		345
Y10T29/49821	10	by altering or destroying work part or connector	CPCONLY	Y10T29/49821		715
Y10T29/49822	10	by applying force	CPCONLY	Y10T29/49822		1198
Y10T29/49824	11	to elastically deform work part or connector	CPCONLY	Y10T29/49824		281
Y10T29/49826	9	Assembling or joining	CPCONLY	Y10T29/49826		17313
Y10T29/49828	10	Progressively advancing of work assembly station or assembled portion of work	CPCONLY	Y10T29/49828		1055
Y10T29/49829	11	Advancing work to successive stations [i.e., assembly line]	CPCONLY	Y10T29/49829		708
Y10T29/49831	11	Advancing station	CPCONLY	Y10T29/49831		115
Y10T29/49833	10	Punching, piercing or reaming part by surface of second part	CPCONLY	Y10T29/49833		1404
Y10T29/49835	11	with shaping	CPCONLY	Y10T29/49835		339
Y10T29/49837	12	of first part	CPCONLY	Y10T29/49837		287
Y10T29/49838	10	by stringing	CPCONLY	Y10T29/49838		671
Y10T29/4984	10	Retaining clearance for motion between assembled parts	CPCONLY	Y10T29/4984		1329
Y10T29/49842	11	Between tube-forming helical coils	CPCONLY	Y10T29/49842		65
Y10T29/49844	11	Through resilient media	CPCONLY	Y10T29/49844		297
Y10T29/49845	11	by deforming interlock	CPCONLY	Y10T29/49845		273
Y10T29/49847	12	by folding part into plural ears	CPCONLY	Y10T29/49847		46
Y10T29/49849	12	by wrapping around	CPCONLY	Y10T29/49849		62
Y10T29/49851	13	of link closure	CPCONLY	Y10T29/49851		13
Y10T29/49853	12	of sphere, i.e., ball, in socket	CPCONLY	Y10T29/49853		340
Y10T29/49854	13	Ball point pen making	CPCONLY	Y10T29/49854		40
Y10T29/49856	13	Allowing assembled sphere to move in single plane only	CPCONLY	Y10T29/49856		40
Y10T29/49858	12	of flange into tubular socket	CPCONLY	Y10T29/49858		41
Y10T29/4986	12	Outwardly deforming internally fitted rod	CPCONLY	Y10T29/4986		38
Y10T29/49861	10	Sizing mating parts during final positional association	CPCONLY	Y10T29/49861		694
Y10T29/49863	10	with prestressing of part	CPCONLY	Y10T29/49863		1249
Y10T29/49865	11	by temperature differential [e.g., shrink fit]	CPCONLY	Y10T29/49865		1374
Y10T29/49867	11	of skin on frame member	CPCONLY	Y10T29/49867		201
Y10T29/49869	12	by flexing	CPCONLY	Y10T29/49869		72
Y10T29/4987	11	Elastic joining of parts	CPCONLY	Y10T29/4987		1524
Y10T29/49872	12	Confining elastic part in socket	CPCONLY	Y10T29/49872		1105
Y10T29/49874	11	Prestressing rod, filament or strand	CPCONLY	Y10T29/49874		642
Y10T29/49876	11	by snap fit	CPCONLY	Y10T29/49876		1545
Y10T29/49877	10	of flexible wall, expansible chamber devices [e.g., bellows]	CPCONLY	Y10T29/49877		386
Y10T29/49879	10	Spaced wall tube or receptacle	CPCONLY	Y10T29/49879		1085
Y10T29/49881	10	of separate helix [e.g., screw thread]	CPCONLY	Y10T29/49881		468
Y10T29/49883	10	Ribbing	CPCONLY	Y10T29/49883		64
Y10T29/49885	10	with coating before or during assembling	CPCONLY	Y10T29/49885		1836
Y10T29/49886	11	to roughen surface	CPCONLY	Y10T29/49886		93
Y10T29/49888	10	Subsequently coating	CPCONLY	Y10T29/49888		1227
Y10T29/4989	10	with spreading of cable strands	CPCONLY	Y10T29/4989		112
Y10T29/49892	10	Joining plate edge perpendicularly to frame	CPCONLY	Y10T29/49892		203
Y10T29/49893	10	Peripheral joining of opposed mirror image parts to form a hollow body	CPCONLY	Y10T29/49893		1057
Y10T29/49895	10	Associating parts by use of aligning means [e.g., use of a drift pin or a "fixture"]	CPCONLY	Y10T29/49895		1668
Y10T29/49897	11	Registering mating opposed tool parts [e.g., registering a punch and a cooperating die]	CPCONLY	Y10T29/49897		132
Y10T29/49899	11	by multiple cooperating aligning means	CPCONLY	Y10T29/49899		256
Y10T29/49901	11	Sequentially associating parts on stationary aligning means	CPCONLY	Y10T29/49901		312
Y10T29/49902	11	by manipulating aligning means	CPCONLY	Y10T29/49902		417
Y10T29/49904	10	Assembling a subassembly, then assembling with a second subassembly	CPCONLY	Y10T29/49904		1145
Y10T29/49906	10	Metal deforming with nonmetallic bonding	CPCONLY	Y10T29/49906		485
Y10T29/49908	10	Joining by deforming	CPCONLY	Y10T29/49908		1416
Y10T29/49909	11	Securing cup or tube between axially extending concentric annuli	CPCONLY	Y10T29/49909		141
Y10T29/49911	12	by expanding inner annulus	CPCONLY	Y10T29/49911		289
Y10T29/49913	12	by constricting outer annulus	CPCONLY	Y10T29/49913		489
Y10T29/49915	11	Overedge assembling of seated part	CPCONLY	Y10T29/49915		2167
Y10T29/49917	12	by necking in cup or tube wall	CPCONLY	Y10T29/49917		294
Y10T29/49918	13	At cup or tube end	CPCONLY	Y10T29/49918		736
Y10T29/4992	12	by flaring inserted cup or tube end	CPCONLY	Y10T29/4992		913
Y10T29/49922	12	by bending over projecting prongs	CPCONLY	Y10T29/49922		705
Y10T29/49924	11	of parallel side-by-side elongated members	CPCONLY	Y10T29/49924		199
Y10T29/49925	11	Inward deformation of aperture or hollow body wall	CPCONLY	Y10T29/49925		496
Y10T29/49927	12	Hollow body is axially joined cup or tube	CPCONLY	Y10T29/49927		733
Y10T29/49929	13	Joined to rod	CPCONLY	Y10T29/49929		1151
Y10T29/49931	14	Joined to overlapping ends of plural rods	CPCONLY	Y10T29/49931		102
Y10T29/49933	14	After thinning	CPCONLY	Y10T29/49933		31
Y10T29/49934	12	by axially applying force	CPCONLY	Y10T29/49934		984
Y10T29/49936	11	Surface interlocking	CPCONLY	Y10T29/49936		956
Y10T29/49938	11	Radially expanding part in cavity, aperture, or hollow body	CPCONLY	Y10T29/49938		1252
Y10T29/4994	12	Radially expanding internal tube	CPCONLY	Y10T29/4994		1482
Y10T29/49941	12	Peripheral edge joining of abutting plates	CPCONLY	Y10T29/49941		64
Y10T29/49943	12	Riveting	CPCONLY	Y10T29/49943		685
Y10T29/49945	10	by driven force fit	CPCONLY	Y10T29/49945		1841
Y10T29/49947	10	by applying separate fastener	CPCONLY	Y10T29/49947		2088
Y10T29/49948	11	Multipart cooperating fastener [e.g., bolt and nut]	CPCONLY	Y10T29/49948		884
Y10T29/4995	12	Nonthreaded	CPCONLY	Y10T29/4995		227
Y10T29/49952	12	At least one part is nonmetallic	CPCONLY	Y10T29/49952		180
Y10T29/49954	11	Fastener deformed after application	CPCONLY	Y10T29/49954		343
Y10T29/49956	12	Riveting	CPCONLY	Y10T29/49956		527
Y10T29/49957	13	At least one part nonmetallic	CPCONLY	Y10T29/49957		83
Y10T29/49959	11	Nonresilient fastener	CPCONLY	Y10T29/49959		371
Y10T29/49961	12	At least one part nonmetallic	CPCONLY	Y10T29/49961		69
Y10T29/49963	11	Threaded fastener	CPCONLY	Y10T29/49963		1004
Y10T29/49964	12	At least one part nonmetallic	CPCONLY	Y10T29/49964		165
Y10T29/49966	11	with supplemental joining	CPCONLY	Y10T29/49966		202
Y10T29/49968	12	Metal fusion joining	CPCONLY	Y10T29/49968		308
Y10T29/4997	12	At least one part nonmetallic	CPCONLY	Y10T29/4997		85
Y10T29/49972	9	with separating, localizing, or eliminating of as-cast defects from a metal casting [e.g., anti-pipe]	CPCONLY	Y10T29/49972		299
Y10T29/49973	10	Compressing ingot while still partially molten	CPCONLY	Y10T29/49973		37
Y10T29/49975	10	Removing defects	CPCONLY	Y10T29/49975		36
Y10T29/49977	11	From center of ingot to leave hollow blank	CPCONLY	Y10T29/49977		15
Y10T29/49979	11	After deforming	CPCONLY	Y10T29/49979		25
Y10T29/4998	9	Combined manufacture including applying or shaping of fluent material	CPCONLY	Y10T29/4998		1460
Y10T29/49982	10	Coating	CPCONLY	Y10T29/49982		1199
Y10T29/49984	11	and casting	CPCONLY	Y10T29/49984		313
Y10T29/49986	11	Subsequent to metal working	CPCONLY	Y10T29/49986		684
Y10T29/49988	10	Metal casting	CPCONLY	Y10T29/49988		547
Y10T29/49989	11	Followed by cutting or removing material	CPCONLY	Y10T29/49989		651
Y10T29/49991	11	Combined with rolling	CPCONLY	Y10T29/49991		512
Y10T29/49993	10	Filling of opening	CPCONLY	Y10T29/49993		482
Y10T29/49995	9	Shaping one-piece blank by removing material	CPCONLY	Y10T29/49995		1225
Y10T29/49996	10	Successive distinct removal operations	CPCONLY	Y10T29/49996		1004
Y10T29/49998	9	Work holding	CPCONLY	Y10T29/49998		1099
Y10T29/50	8	Convertible metal working machine	CPCONLY	Y10T29/50		248
Y10T29/505	9	Vise type	CPCONLY	Y10T29/505		71
Y10T29/51	8	Plural diverse manufacturing apparatus including means for metal shaping or assembling	CPCONLY	Y10T29/51		786
Y10T29/5101	9	Slide fastener or slide fastener element	CPCONLY	Y10T29/5101		211
Y10T29/5102	9	Binding or covering and cutting	CPCONLY	Y10T29/5102		193
Y10T29/5103	10	Cutting covering material only	CPCONLY	Y10T29/5103		131
Y10T29/5104	9	Type of machine	CPCONLY	Y10T29/5104		
Y10T29/5105	10	Drill press	CPCONLY	Y10T29/5105		408
Y10T29/5107	11	Drilling and other	CPCONLY	Y10T29/5107		425
Y10T29/5108	11	Portable	CPCONLY	Y10T29/5108		51
Y10T29/5109	10	Lathe	CPCONLY	Y10T29/5109		457
Y10T29/511	11	Grinding attachment	CPCONLY	Y10T29/511		90
Y10T29/5111	11	Pulley or wheel	CPCONLY	Y10T29/5111		116
Y10T29/5112	11	Convertible	CPCONLY	Y10T29/5112		82
Y10T29/5113	11	Commutator	CPCONLY	Y10T29/5113		289
Y10T29/5114	11	Lathe and tool	CPCONLY	Y10T29/5114		349
Y10T29/5115	10	Planer	CPCONLY	Y10T29/5115		50
Y10T29/5116	9	forging and bending, cutting or punching	CPCONLY	Y10T29/5116		383
Y10T29/5117	10	Fastener [zipper]	CPCONLY	Y10T29/5117		81
Y10T29/5118	10	Riveting	CPCONLY	Y10T29/5118		204
Y10T29/512	10	Ball making	CPCONLY	Y10T29/512		19
Y10T29/5121	10	Wire working	CPCONLY	Y10T29/5121		130
Y10T29/5122	9	with means to feed work during tool contact	CPCONLY	Y10T29/5122		100
Y10T29/5123	10	including nonrotary flying tool	CPCONLY	Y10T29/5123		12
Y10T29/5124	9	with means to feed work intermittently from one tool station to another	CPCONLY	Y10T29/5124		533
Y10T29/5125	10	Stock turret	CPCONLY	Y10T29/5125		282
Y10T29/5126	11	Swiss type	CPCONLY	Y10T29/5126		49
Y10T29/5127	10	Blank turret	CPCONLY	Y10T29/5127		135
Y10T29/5128	11	Rotary work - vertical axis	CPCONLY	Y10T29/5128		232
Y10T29/5129	11	Rotary work - horizontal axis	CPCONLY	Y10T29/5129		168
Y10T29/513	11	Stationary work	CPCONLY	Y10T29/513		396
Y10T29/5132	11	Belt drive	CPCONLY	Y10T29/5132		22
Y10T29/5133	11	Crankshaft	CPCONLY	Y10T29/5133		11
Y10T29/5134	11	Collapsible tube	CPCONLY	Y10T29/5134		62
Y10T29/5135	10	Endless belt	CPCONLY	Y10T29/5135		27
Y10T29/5136	9	Separate tool stations for selective or successive operation on work	CPCONLY	Y10T29/5136		367
Y10T29/5137	10	including assembling or disassembling station	CPCONLY	Y10T29/5137		406
Y10T29/5138	11	and means to machine work part to fit cooperating work part	CPCONLY	Y10T29/5138		149
Y10T29/5139	11	and means to sever work prior to disassembling	CPCONLY	Y10T29/5139		123
Y10T29/514	12	comprising means to strip insulation from wire	CPCONLY	Y10T29/514		277
Y10T29/5141	11	and means to stake electric wire to commutator or armature in assembling of electric motor or generator	CPCONLY	Y10T29/5141		43
Y10T29/5142	11	and means to sever work from supply	CPCONLY	Y10T29/5142		527
Y10T29/5143	11	and means to machine product	CPCONLY	Y10T29/5143		119
Y10T29/5145	12	to sever product to length	CPCONLY	Y10T29/5145		169
Y10T29/5146	9	Common reciprocating support for spaced tools	CPCONLY	Y10T29/5146		74
Y10T29/5147	9	including composite tool	CPCONLY	Y10T29/5147		190
Y10T29/5148	10	including severing means	CPCONLY	Y10T29/5148		184
Y10T29/5149	11	to sever electric terminal from supply strip	CPCONLY	Y10T29/5149		151
Y10T29/515	11	to trim electric component	CPCONLY	Y10T29/515		249
Y10T29/5151	12	Means comprising hand-manipulatable implement	CPCONLY	Y10T29/5151		169
Y10T29/5152	9	with turret mechanism	CPCONLY	Y10T29/5152		185
Y10T29/5153	10	Multiple turret	CPCONLY	Y10T29/5153		132
Y10T29/5154	10	tool turret	CPCONLY	Y10T29/5154		191
Y10T29/5155	11	Rotary tool holder	CPCONLY	Y10T29/5155		275
Y10T29/5157	11	Sliding tool holder	CPCONLY	Y10T29/5157		75
Y10T29/5158	11	Fluid operated	CPCONLY	Y10T29/5158		179
Y10T29/5159	11	Cam operated	CPCONLY	Y10T29/5159		
Y10T29/516	12	Longitudinal turret axis	CPCONLY	Y10T29/516		67
Y10T29/5161	12	Transverse turret axis	CPCONLY	Y10T29/5161		100
Y10T29/5162	11	Lever operated	CPCONLY	Y10T29/5162		35
Y10T29/5163	11	Rack-and-pinion operated	CPCONLY	Y10T29/5163		84
Y10T29/5164	11	Screw operated	CPCONLY	Y10T29/5164		59
Y10T29/5165	10	including rotating and/or locking means	CPCONLY	Y10T29/5165		251
Y10T29/5166	11	Frictional and positive	CPCONLY	Y10T29/5166		78
Y10T29/5167	11	Lock means for tool or work turrets	CPCONLY	Y10T29/5167		111
Y10T29/5168	9	Multiple-tool holder	CPCONLY	Y10T29/5168		73
Y10T29/517	10	Laterally movable stock holder	CPCONLY	Y10T29/517		78
Y10T29/5171	10	Axial tool and transversely movable slide rest	CPCONLY	Y10T29/5171		69
Y10T29/5172	11	Rotary tool spindle	CPCONLY	Y10T29/5172		71
Y10T29/5173	10	Longitudinally and transversely movable	CPCONLY	Y10T29/5173		69
Y10T29/5174	11	Rotary tool spindle	CPCONLY	Y10T29/5174		39
Y10T29/5175	10	Oscillating tool	CPCONLY	Y10T29/5175		75
Y10T29/5176	9	including machining means	CPCONLY	Y10T29/5176		301
Y10T29/5177	10	and work-holder for assembly	CPCONLY	Y10T29/5177		178
Y10T29/5178	9	Attachment	CPCONLY	Y10T29/5178		394
Y10T29/5179	9	Speed controller	CPCONLY	Y10T29/5179		207
Y10T29/518	9	Carriage stop mechanism	CPCONLY	Y10T29/518		175
Y10T29/5182	9	Flash remover	CPCONLY	Y10T29/5182		131
Y10T29/5183	9	Welding strip ends	CPCONLY	Y10T29/5183		83
Y10T29/5184	9	Casting and working	CPCONLY	Y10T29/5184		237
Y10T29/5185	9	Tube making	CPCONLY	Y10T29/5185		216
Y10T29/5186	9	Covering	CPCONLY	Y10T29/5186		128
Y10T29/5187	9	Wire working	CPCONLY	Y10T29/5187		433
Y10T29/5188	9	Radiator making	CPCONLY	Y10T29/5188		102
Y10T29/5189	9	Printing plate	CPCONLY	Y10T29/5189		15
Y10T29/519	9	Turret	CPCONLY	Y10T29/519		214
Y10T29/5191	9	Assembly	CPCONLY	Y10T29/5191		452
Y10T29/5192	9	Armature	CPCONLY	Y10T29/5192		54
Y10T29/5193	9	Electrical connector or terminal	CPCONLY	Y10T29/5193		582
Y10T29/5195	9	Tire valve or spark plug	CPCONLY	Y10T29/5195		26
Y10T29/5196	9	Multiple station with conveyor	CPCONLY	Y10T29/5196		620
Y10T29/5197	9	Multiple stations working strip material	CPCONLY	Y10T29/5197		163
Y10T29/5198	9	Continuous strip	CPCONLY	Y10T29/5198		157
Y10T29/5199	9	Work on tubes	CPCONLY	Y10T29/5199		255
Y10T29/52	8	Plural diverse manufacturing apparatus	CPCONLY	Y10T29/52		143
Y10T29/53	8	Means to assemble or disassemble	CPCONLY	Y10T29/53		1476
Y10T29/53004	9	with means to regulate operation by use of templet, tape, card or other replaceable information supply	CPCONLY	Y10T29/53004		209
Y10T29/53009	10	with comparator	CPCONLY	Y10T29/53009		53
Y10T29/53013	11	Computer input	CPCONLY	Y10T29/53013		146
Y10T29/53017	10	Web or strand-carried information supply	CPCONLY	Y10T29/53017		42
Y10T29/53022	9	with means to test work or product	CPCONLY	Y10T29/53022		529
Y10T29/53026	9	with randomly actuated stopping or disabling means	CPCONLY	Y10T29/53026		52
Y10T29/5303	10	Responsive to condition of work or product	CPCONLY	Y10T29/5303		148
Y10T29/53035	10	Responsive to operative [e.g., safety device, etc.]	CPCONLY	Y10T29/53035		35
Y10T29/53039	9	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T29/53039		412
Y10T29/53043	10	including means to divert defective work part	CPCONLY	Y10T29/53043		95
Y10T29/53048	10	Multiple station assembly or disassembly apparatus	CPCONLY	Y10T29/53048		170
Y10T29/53052	11	including position sensor	CPCONLY	Y10T29/53052		244
Y10T29/53057	10	Responsive to timer	CPCONLY	Y10T29/53057		43
Y10T29/53061	10	Responsive to work or work-related machine element	CPCONLY	Y10T29/53061		520
Y10T29/53065	11	with means to fasten by deformation	CPCONLY	Y10T29/53065		297
Y10T29/5307	12	Self-piercing work part	CPCONLY	Y10T29/5307		76
Y10T29/53074	11	with means to fasten by elastic joining	CPCONLY	Y10T29/53074		78
Y10T29/53078	11	with means to fasten by frictional fitting	CPCONLY	Y10T29/53078		130
Y10T29/53083	11	including means to apply magnetic force directly to position or hold work	CPCONLY	Y10T29/53083		50
Y10T29/53087	9	with signal, scale, illuminator, or optical viewer	CPCONLY	Y10T29/53087		455
Y10T29/53091	10	for work-holder for assembly or disassembly	CPCONLY	Y10T29/53091		408
Y10T29/53096	9	including means to provide a controlled environment	CPCONLY	Y10T29/53096		86
Y10T29/531	9	Nuclear device	CPCONLY	Y10T29/531		214
Y10T29/53104	9	Roller or ball bearing	CPCONLY	Y10T29/53104		286
Y10T29/53109	10	including deforming means	CPCONLY	Y10T29/53109		92
Y10T29/53113	9	Heat exchanger	CPCONLY	Y10T29/53113		426
Y10T29/53117	10	including means to manipulate heat exchanger tube bundle	CPCONLY	Y10T29/53117		71
Y10T29/53122	10	including deforming means	CPCONLY	Y10T29/53122		469
Y10T29/53126	9	Means to place sheath on running-length core	CPCONLY	Y10T29/53126		210
Y10T29/5313	9	Means to assemble electrical device	CPCONLY	Y10T29/5313		893
Y10T29/53135	10	Storage cell or battery	CPCONLY	Y10T29/53135		500
Y10T29/53139	11	including deforming means	CPCONLY	Y10T29/53139		94
Y10T29/53143	10	Motor or generator	CPCONLY	Y10T29/53143		840
Y10T29/53148	11	Means to assemble commutator	CPCONLY	Y10T29/53148		95
Y10T29/53152	11	Means to position insulation	CPCONLY	Y10T29/53152		173
Y10T29/53157	11	Means to stake wire to commutator or armature	CPCONLY	Y10T29/53157		129
Y10T29/53161	11	including deforming means	CPCONLY	Y10T29/53161		366
Y10T29/53165	10	Magnetic memory device	CPCONLY	Y10T29/53165		266
Y10T29/5317	10	Laminated device	CPCONLY	Y10T29/5317		297
Y10T29/53174	10	Means to fasten electrical component to wiring board, base, or substrate	CPCONLY	Y10T29/53174		1496
Y10T29/53178	11	Chip component	CPCONLY	Y10T29/53178		1366
Y10T29/53183	11	Multilead component	CPCONLY	Y10T29/53183		843
Y10T29/53187	10	Multiple station assembly apparatus	CPCONLY	Y10T29/53187		396
Y10T29/53191	10	Means to apply vacuum directly to position or hold work part	CPCONLY	Y10T29/53191		808
Y10T29/53196	10	Means to apply magnetic force directly to position or hold work part	CPCONLY	Y10T29/53196		177
Y10T29/532	10	Conductor	CPCONLY	Y10T29/532		431
Y10T29/53204	11	Electrode	CPCONLY	Y10T29/53204		165
Y10T29/53209	11	Terminal or connector	CPCONLY	Y10T29/53209		681
Y10T29/53213	12	Assembled to wire-type conductor	CPCONLY	Y10T29/53213		543
Y10T29/53217	13	Means to simultaneously assemble multiple, independent conductors to terminal	CPCONLY	Y10T29/53217		536
Y10T29/53222	13	Means comprising hand-manipulatable implement	CPCONLY	Y10T29/53222		198
Y10T29/53226	14	Fastening by deformation	CPCONLY	Y10T29/53226		607
Y10T29/5323	14	Fastening by elastic joining	CPCONLY	Y10T29/5323		82
Y10T29/53235	13	Means to fasten by deformation	CPCONLY	Y10T29/53235		912
Y10T29/53239	13	Means to fasten by elastic joining	CPCONLY	Y10T29/53239		150
Y10T29/53243	11	Multiple, independent conductors	CPCONLY	Y10T29/53243		412
Y10T29/53248	11	Switch or fuse	CPCONLY	Y10T29/53248		116
Y10T29/53252	10	Means to simultaneously fasten three or more parts	CPCONLY	Y10T29/53252		157
Y10T29/53257	10	Means comprising hand-manipulatable implement	CPCONLY	Y10T29/53257		535
Y10T29/53261	10	Means to align and advance work part	CPCONLY	Y10T29/53261		1010
Y10T29/53265	10	with work-holder for assembly	CPCONLY	Y10T29/53265		777
Y10T29/5327	10	Means to fasten by deforming	CPCONLY	Y10T29/5327		251
Y10T29/53274	9	Means to disassemble electrical device	CPCONLY	Y10T29/53274		395
Y10T29/53278	10	Storage cell or battery	CPCONLY	Y10T29/53278		84
Y10T29/53283	10	Means comprising hand-manipulatable implement	CPCONLY	Y10T29/53283		526
Y10T29/53287	9	Means to place traveler on ring or ring on bobbin of a textile machine	CPCONLY	Y10T29/53287		46
Y10T29/53291	9	Slide fastener	CPCONLY	Y10T29/53291		163
Y10T29/53296	10	Means to assemble stop onto stringer	CPCONLY	Y10T29/53296		97
Y10T29/533	10	Means to assemble slider onto stringer	CPCONLY	Y10T29/533		118
Y10T29/53304	10	Means to assemble teeth onto stringer	CPCONLY	Y10T29/53304		82
Y10T29/53309	10	Disassembly means	CPCONLY	Y10T29/53309		70
Y10T29/53313	9	Means to interrelatedly feed plural work parts from plural sources without manual intervention	CPCONLY	Y10T29/53313		236
Y10T29/53317	10	Box or pallet assembly means	CPCONLY	Y10T29/53317		89
Y10T29/53322	10	Means to assemble container	CPCONLY	Y10T29/53322		174
Y10T29/53326	11	Handle to container	CPCONLY	Y10T29/53326		29
Y10T29/5333	11	Label to container	CPCONLY	Y10T29/5333		30
Y10T29/53335	11	Pressurized dispensing container	CPCONLY	Y10T29/53335		42
Y10T29/53339	11	Hypodermic syringe	CPCONLY	Y10T29/53339		37
Y10T29/53343	11	including fluid component	CPCONLY	Y10T29/53343		22
Y10T29/53348	10	Running-length work	CPCONLY	Y10T29/53348		74
Y10T29/53352	11	Means including orbiting running-length work supply	CPCONLY	Y10T29/53352		18
Y10T29/53357	11	Pipe section	CPCONLY	Y10T29/53357		32
Y10T29/53361	11	Assembled to article	CPCONLY	Y10T29/53361		63
Y10T29/53365	10	Multiple station assembly apparatus	CPCONLY	Y10T29/53365		290
Y10T29/5337	10	including assembly pallet	CPCONLY	Y10T29/5337		134
Y10T29/53374	10	including turret-type conveyor	CPCONLY	Y10T29/53374		201
Y10T29/53378	10	including converging conveyors	CPCONLY	Y10T29/53378		134
Y10T29/53383	10	and means to fasten work parts together	CPCONLY	Y10T29/53383		226
Y10T29/53387	11	by deforming	CPCONLY	Y10T29/53387		198
Y10T29/53391	11	by elastic joining	CPCONLY	Y10T29/53391		105
Y10T29/53396	11	by friction fit	CPCONLY	Y10T29/53396		122
Y10T29/534	9	Multiple station assembly or disassembly apparatus	CPCONLY	Y10T29/534		287
Y10T29/53404	10	including turret-type conveyor	CPCONLY	Y10T29/53404		127
Y10T29/53409	10	including converging conveyors	CPCONLY	Y10T29/53409		55
Y10T29/53413	11	and primary central conveyor	CPCONLY	Y10T29/53413		60
Y10T29/53417	10	Means to fasten work parts together	CPCONLY	Y10T29/53417		168
Y10T29/53422	11	by deforming	CPCONLY	Y10T29/53422		98
Y10T29/53426	11	by elastic joining	CPCONLY	Y10T29/53426		27
Y10T29/5343	9	Means to drive self-piercing work part	CPCONLY	Y10T29/5343		475
Y10T29/53435	9	including assembly pallet	CPCONLY	Y10T29/53435		154
Y10T29/53439	9	including provision to utilize thermal expansion of work	CPCONLY	Y10T29/53439		67
Y10T29/53443	9	Means to assemble or disassemble container and fluid component	CPCONLY	Y10T29/53443		101
Y10T29/53448	9	Vehicle wheel	CPCONLY	Y10T29/53448		112
Y10T29/53452	10	Railway wheel	CPCONLY	Y10T29/53452		8
Y10T29/53457	9	Tumbler lock	CPCONLY	Y10T29/53457		35
Y10T29/53461	9	toy doll	CPCONLY	Y10T29/53461		51
Y10T29/53465	9	Film or tape cartridge	CPCONLY	Y10T29/53465		135
Y10T29/5347	9	Crystal to watch or clock	CPCONLY	Y10T29/5347		49
Y10T29/53474	9	Means to insert or extract pen point	CPCONLY	Y10T29/53474		54
Y10T29/53478	9	with magazine supply	CPCONLY	Y10T29/53478		831
Y10T29/53483	10	and magnetic work-holder or positioner	CPCONLY	Y10T29/53483		72
Y10T29/53487	10	Assembling means comprising hand-manipulatable implement	CPCONLY	Y10T29/53487		144
Y10T29/53491	11	One work part comprising living tissue	CPCONLY	Y10T29/53491		11
Y10T29/53496	11	comprising driver for snap-off-mandrel fastener; e.g., Pop [TM] riveter	CPCONLY	Y10T29/53496		94
Y10T29/535	11	One work part comprising nut or screw	CPCONLY	Y10T29/535		46
Y10T29/53504	11	One work part comprising paper clip	CPCONLY	Y10T29/53504		33
Y10T29/53509	11	Means to assemble tyre stud into tyre tread	CPCONLY	Y10T29/53509		33
Y10T29/53513	11	Means to fasten by deforming	CPCONLY	Y10T29/53513		108
Y10T29/53517	12	Fastening sinker to fishing line	CPCONLY	Y10T29/53517		22
Y10T29/53522	10	Means to fasten by deforming	CPCONLY	Y10T29/53522		219
Y10T29/53526	9	Running-length work	CPCONLY	Y10T29/53526		129
Y10T29/5353	10	Assembled on core	CPCONLY	Y10T29/5353		59
Y10T29/53535	9	including means to vibrate work	CPCONLY	Y10T29/53535		108
Y10T29/53539	9	including work conveyor	CPCONLY	Y10T29/53539		381
Y10T29/53543	10	including transporting track	CPCONLY	Y10T29/53543		182
Y10T29/53548	11	and work carrying vehicle	CPCONLY	Y10T29/53548		177
Y10T29/53552	9	Valve applying or removing	CPCONLY	Y10T29/53552		443
Y10T29/53557	10	Engine valve unit puller or applier	CPCONLY	Y10T29/53557		76
Y10T29/53561	10	Engine valve spring compressor [only]	CPCONLY	Y10T29/53561		124
Y10T29/53565	11	Plural spring engagement	CPCONLY	Y10T29/53565		60
Y10T29/5357	11	Screw operated	CPCONLY	Y10T29/5357		76
Y10T29/53574	12	Parallel or tong type, side entrance	CPCONLY	Y10T29/53574		75
Y10T29/53578	11	Lever operated	CPCONLY	Y10T29/53578		200
Y10T29/53583	12	Single jaw or valve engagement	CPCONLY	Y10T29/53583		104
Y10T29/53587	12	Plier type	CPCONLY	Y10T29/53587		138
Y10T29/53591	10	to or from wheel rim of resilient tire or tube	CPCONLY	Y10T29/53591		70
Y10T29/53596	10	Removal tool	CPCONLY	Y10T29/53596		73
Y10T29/536	9	Piston ring inserter or remover	CPCONLY	Y10T29/536		238
Y10T29/53604	10	Plier-type operation	CPCONLY	Y10T29/53604		40
Y10T29/53609	11	with ring encirclement	CPCONLY	Y10T29/53609		92
Y10T29/53613	9	Spring applier or remover	CPCONLY	Y10T29/53613		181
Y10T29/53617	10	Transmission spring	CPCONLY	Y10T29/53617		37
Y10T29/53622	10	Helical spring	CPCONLY	Y10T29/53622		383
Y10T29/53626	10	Flat spiral spring [e.g., watch or clock type]	CPCONLY	Y10T29/53626		34
Y10T29/5363	10	Circular spring	CPCONLY	Y10T29/5363		385
Y10T29/53635	10	Leaf spring	CPCONLY	Y10T29/53635		57
Y10T29/53639	9	Means to stake watch or clock	CPCONLY	Y10T29/53639		88
Y10T29/53643	10	Plier type	CPCONLY	Y10T29/53643		86
Y10T29/53648	9	Brake lining to brake shoe	CPCONLY	Y10T29/53648		97
Y10T29/53652	9	Tube and coextensive core	CPCONLY	Y10T29/53652		347
Y10T29/53657	9	to apply or remove a resilient article [e.g., tube, sleeve, etc.]	CPCONLY	Y10T29/53657		1793
Y10T29/53661	10	Nipple to nursing bottle	CPCONLY	Y10T29/53661		23
Y10T29/53665	10	Well protector to sucker rod	CPCONLY	Y10T29/53665		67
Y10T29/5367	9	Coupling to conduit	CPCONLY	Y10T29/5367		837
Y10T29/53674	9	Loose-leaf sheet binder	CPCONLY	Y10T29/53674		75
Y10T29/53678	9	Compressing parts together face to face	CPCONLY	Y10T29/53678		375
Y10T29/53683	9	Spreading parts apart or separating them from face to face engagement	CPCONLY	Y10T29/53683		576
Y10T29/53687	9	by rotation of work part	CPCONLY	Y10T29/53687		758
Y10T29/53691	10	Means to insert or remove helix	CPCONLY	Y10T29/53691		132
Y10T29/53696	9	Means to string	CPCONLY	Y10T29/53696		434
Y10T29/537	9	tool handle and tool	CPCONLY	Y10T29/537		77
Y10T29/53704	9	tool chuck and tool	CPCONLY	Y10T29/53704		84
Y10T29/53709	9	Overedge assembling means	CPCONLY	Y10T29/53709		497
Y10T29/53713	10	Belt-hook attacher	CPCONLY	Y10T29/53713		78
Y10T29/53717	10	Annular work	CPCONLY	Y10T29/53717		253
Y10T29/53722	11	with radially acting tool inside annular work	CPCONLY	Y10T29/53722		130
Y10T29/53726	11	with second workpiece inside annular work one workpiece moved to shape the other	CPCONLY	Y10T29/53726		106
Y10T29/5373	12	comprising driver for snap-off-mandrel fastener; e.g., Pop [TM] riveter	CPCONLY	Y10T29/5373		164
Y10T29/53735	13	including near side fastener shaping tool	CPCONLY	Y10T29/53735		64
Y10T29/53739	13	Pneumatic- or fluid-actuated tool	CPCONLY	Y10T29/53739		129
Y10T29/53743	14	Liquid	CPCONLY	Y10T29/53743		33
Y10T29/53748	15	and gas	CPCONLY	Y10T29/53748		110
Y10T29/53752	13	having rotary drive mechanism	CPCONLY	Y10T29/53752		71
Y10T29/53757	13	having allochiral actuating handles	CPCONLY	Y10T29/53757		28
Y10T29/53761	13	having repositionable annulus engaging tool	CPCONLY	Y10T29/53761		32
Y10T29/53765	12	including near side fastener shaping tool	CPCONLY	Y10T29/53765		55
Y10T29/5377	10	Riveter	CPCONLY	Y10T29/5377		458
Y10T29/53774	11	Single header	CPCONLY	Y10T29/53774		268
Y10T29/53778	12	Pipe joiner	CPCONLY	Y10T29/53778		45
Y10T29/53783	10	Clip applier	CPCONLY	Y10T29/53783		420
Y10T29/53787	10	Binding or covering	CPCONLY	Y10T29/53787		338
Y10T29/53791	11	Edge binding	CPCONLY	Y10T29/53791		293
Y10T29/53796	9	Puller or pusher means, contained force multiplying operator	CPCONLY	Y10T29/53796		441
Y10T29/538	10	Hubcap and hub	CPCONLY	Y10T29/538		58
Y10T29/53804	10	Battery post and terminal	CPCONLY	Y10T29/53804		93
Y10T29/53809	10	Cotter pin and cooperating member	CPCONLY	Y10T29/53809		55
Y10T29/53813	11	Plier type means	CPCONLY	Y10T29/53813		63
Y10T29/53817	10	Valve stem pin or key and another member	CPCONLY	Y10T29/53817		92
Y10T29/53822	10	Machine key and another member	CPCONLY	Y10T29/53822		35
Y10T29/53826	10	Arbor-type press means	CPCONLY	Y10T29/53826		204
Y10T29/5383	10	having fluid operator	CPCONLY	Y10T29/5383		1174
Y10T29/53835	10	having wedge operator	CPCONLY	Y10T29/53835		203
Y10T29/53839	10	having percussion or explosive operator	CPCONLY	Y10T29/53839		313
Y10T29/53843	11	Tube, sleeve, or ferrule inserting or removing	CPCONLY	Y10T29/53843		308
Y10T29/53848	10	having screw operator	CPCONLY	Y10T29/53848		505
Y10T29/53852	11	C-frame	CPCONLY	Y10T29/53852		186
Y10T29/53857	11	Central screw, work-engagers around screw	CPCONLY	Y10T29/53857		109
Y10T29/53861	12	Work-engager arms along or parallel to screw	CPCONLY	Y10T29/53861		291
Y10T29/53865	13	with arm connecting engaging means	CPCONLY	Y10T29/53865		101
Y10T29/5387	13	Pivotal arms	CPCONLY	Y10T29/5387		356
Y10T29/53874	13	Pivotal grippers on screw	CPCONLY	Y10T29/53874		147
Y10T29/53878	12	Tubular or tube segment forms work-engager	CPCONLY	Y10T29/53878		376
Y10T29/53883	13	Screw threaded work-engager	CPCONLY	Y10T29/53883		240
Y10T29/53887	13	Movable grippers on screw	CPCONLY	Y10T29/53887		107
Y10T29/53891	12	Plate or bar forms work-engager	CPCONLY	Y10T29/53891		132
Y10T29/53896	10	having lever operator	CPCONLY	Y10T29/53896		750
Y10T29/539	11	Plier type means	CPCONLY	Y10T29/539		445
Y10T29/53904	9	Means comprising piston ring group contractor or holder	CPCONLY	Y10T29/53904		77
Y10T29/53909	9	Means comprising hand manipulatable tool	CPCONLY	Y10T29/53909		957
Y10T29/53913	10	Aligner or center	CPCONLY	Y10T29/53913		570
Y10T29/53917	11	Tube with tube	CPCONLY	Y10T29/53917		198
Y10T29/53922	11	Auto wheel with auto chassis	CPCONLY	Y10T29/53922		117
Y10T29/53926	11	Clutch plates	CPCONLY	Y10T29/53926		44
Y10T29/5393	10	Means comprising impact receiving tool	CPCONLY	Y10T29/5393		507
Y10T29/53935	11	C-frame	CPCONLY	Y10T29/53935		58
Y10T29/53939	11	Thread protector [e.g., wheel axle type]	CPCONLY	Y10T29/53939		28
Y10T29/53943	10	Hand gripper for direct push or pull	CPCONLY	Y10T29/53943		838
Y10T29/53948	11	Centrifugal separator	CPCONLY	Y10T29/53948		31
Y10T29/53952	11	Tube sleeve or ferrule applying or removing	CPCONLY	Y10T29/53952		308
Y10T29/53957	12	Thread-tapping grip	CPCONLY	Y10T29/53957		62
Y10T29/53961	9	with work-holder for assembly	CPCONLY	Y10T29/53961		955
Y10T29/53965	10	for assembling a luminescent mantle	CPCONLY	Y10T29/53965		11
Y10T29/5397	10	and assembling press [e.g., truss assembling means, etc.]	CPCONLY	Y10T29/5397		194
Y10T29/53974	10	having means to permit support movement while work is thereon	CPCONLY	Y10T29/53974		378
Y10T29/53978	9	including means to relatively position plural work parts	CPCONLY	Y10T29/53978		783
Y10T29/53983	9	Work-supported apparatus	CPCONLY	Y10T29/53983		273
Y10T29/53987	9	Tube, sleeve or ferrule	CPCONLY	Y10T29/53987		733
Y10T29/53991	9	Work gripper, anvil, or element	CPCONLY	Y10T29/53991		693
Y10T29/53996	9	by deforming	CPCONLY	Y10T29/53996		554
Y10T29/54	8	Miscellaneous apparatus	CPCONLY	Y10T29/54		65
Y10T70/00	7	Locks	CPCONLY	Y10T70/00		
Y10T70/10	8	Miscellaneous	CPCONLY	Y10T70/10		24
Y10T70/20	8	Attack-actuated defeating mechanisms	CPCONLY	Y10T70/20		224
Y10T70/25	9	With reset mechanisms	CPCONLY	Y10T70/25		26
Y10T70/30	8	Hasp	CPCONLY	Y10T70/30		144
Y10T70/308	9	Combination lock	CPCONLY	Y10T70/308		18
Y10T70/317	10	Hasp-carried	CPCONLY	Y10T70/317		39
Y10T70/325	10	Keeper-carried	CPCONLY	Y10T70/325		47
Y10T70/333	9	Key lock	CPCONLY	Y10T70/333		45
Y10T70/342	10	Hasp-carried	CPCONLY	Y10T70/342		14
Y10T70/35	11	Keeper-encasing	CPCONLY	Y10T70/35		12
Y10T70/358	12	Dead bolt	CPCONLY	Y10T70/358		60
Y10T70/367	12	Latching bolt	CPCONLY	Y10T70/367		35
Y10T70/375	11	Dead bolt	CPCONLY	Y10T70/375		87
Y10T70/383	11	Latching bolt	CPCONLY	Y10T70/383		8
Y10T70/392	10	Keeper-carried	CPCONLY	Y10T70/392		117
Y10T70/40	8	Portable	CPCONLY	Y10T70/40		825
Y10T70/402	9	Fetters	CPCONLY	Y10T70/402		194
Y10T70/404	10	Manacles and cuffs	CPCONLY	Y10T70/404		355
Y10T70/407	11	Nippers	CPCONLY	Y10T70/407		74
Y10T70/409	10	Shackles	CPCONLY	Y10T70/409		840
Y10T70/411	9	Clamps	CPCONLY	Y10T70/411		320
Y10T70/413	9	Padlocks	CPCONLY	Y10T70/413		101
Y10T70/415	10	Combination and/or key-controlled	CPCONLY	Y10T70/415		177
Y10T70/417	10	Combination-controlled	CPCONLY	Y10T70/417		60
Y10T70/42	11	Non-shackle type	CPCONLY	Y10T70/42		52
Y10T70/422	11	Rigid shackle	CPCONLY	Y10T70/422		35
Y10T70/424	12	Sliding	CPCONLY	Y10T70/424		492
Y10T70/426	13	Removable	CPCONLY	Y10T70/426		148
Y10T70/428	12	Pivoted	CPCONLY	Y10T70/428		86
Y10T70/43	13	Sliding detent	CPCONLY	Y10T70/43		150
Y10T70/433	13	Swinging detent	CPCONLY	Y10T70/433		96
Y10T70/435	11	Flexible shackle	CPCONLY	Y10T70/435		194
Y10T70/437	10	Key-controlled	CPCONLY	Y10T70/437		41
Y10T70/439	11	Non-shackle type	CPCONLY	Y10T70/439		92
Y10T70/441	12	Housing extension and cooperating detent	CPCONLY	Y10T70/441		95
Y10T70/443	12	Single stem or shank	CPCONLY	Y10T70/443		246
Y10T70/446	11	Rigid shackle	CPCONLY	Y10T70/446		32
Y10T70/448	12	Divided shackle	CPCONLY	Y10T70/448		11
Y10T70/45	13	Divided jaw type	CPCONLY	Y10T70/45		35
Y10T70/452	12	Sliding	CPCONLY	Y10T70/452		90
Y10T70/454	13	Removable	CPCONLY	Y10T70/454		214
Y10T70/457	13	Arcuate locus	CPCONLY	Y10T70/457		59
Y10T70/459	13	Both legs engaged	CPCONLY	Y10T70/459		334
Y10T70/461	13	Short leg engaged	CPCONLY	Y10T70/461		121
Y10T70/463	13	Long leg engaged	CPCONLY	Y10T70/463		168
Y10T70/465	12	Pivoted	CPCONLY	Y10T70/465		36
Y10T70/467	13	Sliding detent	CPCONLY	Y10T70/467		18
Y10T70/47	14	Free end only engaged	CPCONLY	Y10T70/47		197
Y10T70/472	14	Pivoted end only engaged	CPCONLY	Y10T70/472		4
Y10T70/474	13	Swinging detent	CPCONLY	Y10T70/474		56
Y10T70/476	14	Free end only engaged	CPCONLY	Y10T70/476		210
Y10T70/478	14	Pivoted end only engaged	CPCONLY	Y10T70/478		24
Y10T70/48	13	Arcuate locus	CPCONLY	Y10T70/48		31
Y10T70/483	11	Flexible shackle	CPCONLY	Y10T70/483		341
Y10T70/485	10	With seal	CPCONLY	Y10T70/485		115
Y10T70/487	10	Parts, accessories, attachments and adjuncts	CPCONLY	Y10T70/487		132
Y10T70/489	11	Housings	CPCONLY	Y10T70/489		397
Y10T70/491	11	Shackles	CPCONLY	Y10T70/491		326
Y10T70/493	11	Protectors	CPCONLY	Y10T70/493		162
Y10T70/496	12	Sheaths	CPCONLY	Y10T70/496		83
Y10T70/498	12	Shields or canopies	CPCONLY	Y10T70/498		301
Y10T70/50	8	Special application	CPCONLY	Y10T70/50		395
Y10T70/5004	9	For antitheft signaling device on protected article	CPCONLY	Y10T70/5004		381
Y10T70/5009	9	For portable articles	CPCONLY	Y10T70/5009		1319
Y10T70/5013	10	Canes, umbrellas, apparel	CPCONLY	Y10T70/5013		164
Y10T70/5018	10	Robes	CPCONLY	Y10T70/5018		22
Y10T70/5022	10	Tools	CPCONLY	Y10T70/5022		60
Y10T70/5027	10	Supporting stands	CPCONLY	Y10T70/5027		121
Y10T70/5031	10	Receptacle	CPCONLY	Y10T70/5031		602
Y10T70/5035	11	Bag	CPCONLY	Y10T70/5035		110
Y10T70/504	12	Collapsible throat	CPCONLY	Y10T70/504		84
Y10T70/5044	12	Pivoted rigid jaw	CPCONLY	Y10T70/5044		146
Y10T70/5049	12	Attache or briefcase, portfolio	CPCONLY	Y10T70/5049		63
Y10T70/5053	13	Interengageable slide fastener type	CPCONLY	Y10T70/5053		168
Y10T70/5058	11	Trunk and/or suitcase	CPCONLY	Y10T70/5058		121
Y10T70/5062	12	Projecting fixed or movable lug type	CPCONLY	Y10T70/5062		222
Y10T70/5066	12	Bolt type	CPCONLY	Y10T70/5066		126
Y10T70/5071	13	Hasp controlled	CPCONLY	Y10T70/5071		76
Y10T70/5075	12	Link and lever of hasp type	CPCONLY	Y10T70/5075		37
Y10T70/508	12	Hasp type	CPCONLY	Y10T70/508		179
Y10T70/5084	13	Hasp-carried lock	CPCONLY	Y10T70/5084		97
Y10T70/5089	12	Loop type	CPCONLY	Y10T70/5089		44
Y10T70/5093	9	For closures	CPCONLY	Y10T70/5093		119
Y10T70/5097	10	Cabinet	CPCONLY	Y10T70/5097		170
Y10T70/5102	11	Projecting lug type	CPCONLY	Y10T70/5102		44
Y10T70/5106	12	External catch	CPCONLY	Y10T70/5106		72
Y10T70/5111	11	Projectable bolt	CPCONLY	Y10T70/5111		246
Y10T70/5115	12	Multiple bolts	CPCONLY	Y10T70/5115		86
Y10T70/5119	12	Multidirectional displacement	CPCONLY	Y10T70/5119		41
Y10T70/5124	12	Swinging and hooked end	CPCONLY	Y10T70/5124		72
Y10T70/5128	10	Drawer	CPCONLY	Y10T70/5128		146
Y10T70/5133	11	Dead bolt	CPCONLY	Y10T70/5133		128
Y10T70/5137	11	Till	CPCONLY	Y10T70/5137		16
Y10T70/5142	12	Combination	CPCONLY	Y10T70/5142		104
Y10T70/5146	10	Window	CPCONLY	Y10T70/5146		89
Y10T70/515	11	Sliding sash	CPCONLY	Y10T70/515		214
Y10T70/5155	10	Door	CPCONLY	Y10T70/5155		209
Y10T70/5159	11	Emergency exit	CPCONLY	Y10T70/5159		252
Y10T70/5164	11	Links to limit opening	CPCONLY	Y10T70/5164		151
Y10T70/5168	11	Braces	CPCONLY	Y10T70/5168		76
Y10T70/5173	11	Sliding door	CPCONLY	Y10T70/5173		164
Y10T70/5177	12	Extending keeper	CPCONLY	Y10T70/5177		33
Y10T70/5181	13	Rigid or fixed	CPCONLY	Y10T70/5181		127
Y10T70/5186	13	Extensible	CPCONLY	Y10T70/5186		49
Y10T70/519	12	Projecting or extending bolt	CPCONLY	Y10T70/519		159
Y10T70/5195	12	Projectable bolt	CPCONLY	Y10T70/5195		283
Y10T70/5199	11	Swinging door	CPCONLY	Y10T70/5199		144
Y10T70/5204	12	Interfitting lock housing and keeper	CPCONLY	Y10T70/5204		33
Y10T70/5208	13	Multiple dead bolts	CPCONLY	Y10T70/5208		47
Y10T70/5212	13	Sliding dead bolt	CPCONLY	Y10T70/5212		89
Y10T70/5217	13	Swinging dead bolt	CPCONLY	Y10T70/5217		26
Y10T70/5221	13	Locking latch bolt, biased	CPCONLY	Y10T70/5221		55
Y10T70/5226	12	Combined dead bolt and latching bolt	CPCONLY	Y10T70/5226		552
Y10T70/523	13	Multiple dead bolts	CPCONLY	Y10T70/523		106
Y10T70/5235	13	Multiple latch bolts	CPCONLY	Y10T70/5235		36
Y10T70/5239	13	Dead bolt, dogged latch bolt	CPCONLY	Y10T70/5239		110
Y10T70/5243	13	Manually dogged latch bolt	CPCONLY	Y10T70/5243		31
Y10T70/5246	12	Dead bolts	CPCONLY	Y10T70/5246		
Y10T70/5248	13	Multiple	CPCONLY	Y10T70/5248		20
Y10T70/5252	14	Sliding and swinging	CPCONLY	Y10T70/5252		82
Y10T70/5257	15	Combination operable only	CPCONLY	Y10T70/5257		8
Y10T70/5261	15	Key operable only	CPCONLY	Y10T70/5261		65
Y10T70/5265	14	Sliding and rotary	CPCONLY	Y10T70/5265		26
Y10T70/527	14	Sliding	CPCONLY	Y10T70/527		202
Y10T70/5274	15	Combination operable only	CPCONLY	Y10T70/5274		29
Y10T70/5279	15	Key operable only	CPCONLY	Y10T70/5279		195
Y10T70/5283	14	Swinging	CPCONLY	Y10T70/5283		48
Y10T70/5288	15	Combination operable only	CPCONLY	Y10T70/5288		6
Y10T70/5292	15	Key operable only	CPCONLY	Y10T70/5292		41
Y10T70/5296	13	Single	CPCONLY	Y10T70/5296		28
Y10T70/5301	14	Sliding and swinging	CPCONLY	Y10T70/5301		17
Y10T70/5305	15	Combination operable only	CPCONLY	Y10T70/5305		5
Y10T70/531	15	Key operable only	CPCONLY	Y10T70/531		35
Y10T70/5314	14	Sliding and rotary	CPCONLY	Y10T70/5314		70
Y10T70/5319	14	Sliding	CPCONLY	Y10T70/5319		320
Y10T70/5323	15	Multidirectional displacement	CPCONLY	Y10T70/5323		22
Y10T70/5327	15	Keeper interlocking	CPCONLY	Y10T70/5327		120
Y10T70/5332	15	Curved	CPCONLY	Y10T70/5332		13
Y10T70/5336	15	Combination operable only	CPCONLY	Y10T70/5336		120
Y10T70/5341	15	Key operable only	CPCONLY	Y10T70/5341		562
Y10T70/5345	14	Swinging	CPCONLY	Y10T70/5345		122
Y10T70/535	15	Keeper and housing interlocking	CPCONLY	Y10T70/535		58
Y10T70/5354	15	With hooked end	CPCONLY	Y10T70/5354		78
Y10T70/5358	15	Combination operable only	CPCONLY	Y10T70/5358		14
Y10T70/5363	15	Key operable only	CPCONLY	Y10T70/5363		134
Y10T70/5367	14	Screw	CPCONLY	Y10T70/5367		54
Y10T70/5372	12	Locking latch bolts, biased	CPCONLY	Y10T70/5372		86
Y10T70/5376	13	Keeper interlocking	CPCONLY	Y10T70/5376		46
Y10T70/5381	13	Projectable beyond normal biased position	CPCONLY	Y10T70/5381		150
Y10T70/5385	13	Spring projected	CPCONLY	Y10T70/5385		94
Y10T70/5389	14	Manually operable	CPCONLY	Y10T70/5389		165
Y10T70/5394	15	Directly acting dog for exterior, manual, bolt manipulator	CPCONLY	Y10T70/5394		112
Y10T70/5398	16	Related dog for interior, manual, bolt manipulator	CPCONLY	Y10T70/5398		31
Y10T70/5403	16	Dog having a dog	CPCONLY	Y10T70/5403		41
Y10T70/5407	16	Related dogging means for latch-bolt	CPCONLY	Y10T70/5407		30
Y10T70/5412	16	Dog and dog actuator always interconnected	CPCONLY	Y10T70/5412		23
Y10T70/5416	16	Exterior manipulator declutched from bolt when dogged	CPCONLY	Y10T70/5416		211
Y10T70/542	16	Manual dog-controller concentric with bolt manipulator	CPCONLY	Y10T70/542		18
Y10T70/5425	17	Shiftable rollback serves as dog	CPCONLY	Y10T70/5425		36
Y10T70/5429	17	Additional dog-controller key actuated for dogging and undogging	CPCONLY	Y10T70/5429		36
Y10T70/5434	17	Dog-controller axially slidable and axially rotatable	CPCONLY	Y10T70/5434		49
Y10T70/5438	17	Dog-controller rotatable	CPCONLY	Y10T70/5438		53
Y10T70/5442	17	Key-actuated lock releases dog	CPCONLY	Y10T70/5442		45
Y10T70/5447	18	Manual bolt-manipulator operation releases dog	CPCONLY	Y10T70/5447		49
Y10T70/5451	17	Manual bolt-manipulator operation releases dog	CPCONLY	Y10T70/5451		30
Y10T70/5456	16	Interior manual bolt-manipulator serves as dog-controller	CPCONLY	Y10T70/5456		18
Y10T70/546	17	For both dogging and undogging	CPCONLY	Y10T70/546		24
Y10T70/5465	16	Manual dog-controller	CPCONLY	Y10T70/5465		53
Y10T70/5469	17	With additional lock actuated dog-controller	CPCONLY	Y10T70/5469		32
Y10T70/5473	18	Additional dog-controller controls both dogging and undogging	CPCONLY	Y10T70/5473		50
Y10T70/5478	17	Accessible at door edge	CPCONLY	Y10T70/5478		66
Y10T70/5482	17	Slidable only	CPCONLY	Y10T70/5482		32
Y10T70/5487	16	Manual bolt-manipulator is slidable only	CPCONLY	Y10T70/5487		40
Y10T70/5491	16	Manual bolt-manipulator is lever	CPCONLY	Y10T70/5491		60
Y10T70/5496	15	Freely movable external manipulator	CPCONLY	Y10T70/5496		347
Y10T70/55	15	Dogged bolt or connections	CPCONLY	Y10T70/55		649
Y10T70/5504	16	Automatic	CPCONLY	Y10T70/5504		222
Y10T70/5509	17	Snub bolt	CPCONLY	Y10T70/5509		23
Y10T70/5513	16	By manipulator	CPCONLY	Y10T70/5513		44
Y10T70/5518	16	Connections only	CPCONLY	Y10T70/5518		212
Y10T70/5522	13	Gravity projected	CPCONLY	Y10T70/5522		124
Y10T70/5527	14	Projecting mechanism is lock controlled	CPCONLY	Y10T70/5527		42
Y10T70/5531	13	Combination and/or key operable	CPCONLY	Y10T70/5531		230
Y10T70/5535	14	Trip release	CPCONLY	Y10T70/5535		55
Y10T70/554	10	Cover, lid, cap, encasing shield	CPCONLY	Y10T70/554		206
Y10T70/5544	11	Pivoted	CPCONLY	Y10T70/5544		239
Y10T70/5549	12	Cover-carried lock	CPCONLY	Y10T70/5549		66
Y10T70/5553	13	Dead bolt	CPCONLY	Y10T70/5553		87
Y10T70/5558	13	Latching bolt	CPCONLY	Y10T70/5558		81
Y10T70/5562	11	Removable	CPCONLY	Y10T70/5562		124
Y10T70/5566	12	External locking devices	CPCONLY	Y10T70/5566		313
Y10T70/5571	12	Freely movable when locked	CPCONLY	Y10T70/5571		141
Y10T70/5575	12	Directly seating	CPCONLY	Y10T70/5575		90
Y10T70/558	13	Cover-carried lock	CPCONLY	Y10T70/558		103
Y10T70/5584	14	Dead bolt	CPCONLY	Y10T70/5584		247
Y10T70/5589	14	Latching bolt	CPCONLY	Y10T70/5589		163
Y10T70/5593	12	Movably seating	CPCONLY	Y10T70/5593		93
Y10T70/5597	13	Cover-carried lock	CPCONLY	Y10T70/5597		58
Y10T70/5602	14	Dead bolt	CPCONLY	Y10T70/5602		95
Y10T70/5606	14	Latching bolt	CPCONLY	Y10T70/5606		56
Y10T70/5611	9	For control and machine elements	CPCONLY	Y10T70/5611		78
Y10T70/5615	10	Valve	CPCONLY	Y10T70/5615		103
Y10T70/5619	11	Locked stationary	CPCONLY	Y10T70/5619		122
Y10T70/5624	12	Externally mounted locking device	CPCONLY	Y10T70/5624		135
Y10T70/5628	13	Valve encasing	CPCONLY	Y10T70/5628		208
Y10T70/5633	12	Housing-carried lock	CPCONLY	Y10T70/5633		87
Y10T70/5637	12	With padlock	CPCONLY	Y10T70/5637		223
Y10T70/5642	10	Rod	CPCONLY	Y10T70/5642		166
Y10T70/5646	10	Rotary shaft	CPCONLY	Y10T70/5646		118
Y10T70/565	11	Locked stationary	CPCONLY	Y10T70/565		143
Y10T70/5655	12	Housing-carried lock	CPCONLY	Y10T70/5655		57
Y10T70/5659	13	Dead bolt	CPCONLY	Y10T70/5659		413
Y10T70/5664	13	Latching bolt	CPCONLY	Y10T70/5664		285
Y10T70/5668	12	Shaft-carried lock	CPCONLY	Y10T70/5668		57
Y10T70/5673	11	Freely movable when locked	CPCONLY	Y10T70/5673		30
Y10T70/5677	12	Shaft-carried clutch	CPCONLY	Y10T70/5677		79
Y10T70/5681	10	Gear	CPCONLY	Y10T70/5681		98
Y10T70/5686	11	Planetary	CPCONLY	Y10T70/5686		48
Y10T70/569	10	Lever	CPCONLY	Y10T70/569		16
Y10T70/5695	11	Guide	CPCONLY	Y10T70/5695		80
Y10T70/5699	12	Quadrant	CPCONLY	Y10T70/5699		16
Y10T70/5704	13	Lever-carried lock	CPCONLY	Y10T70/5704		70
Y10T70/5708	12	Fixed lever-receiving keeper	CPCONLY	Y10T70/5708		64
Y10T70/5712	13	Lever-carried lock	CPCONLY	Y10T70/5712		32
Y10T70/5717	11	Multiple	CPCONLY	Y10T70/5717		14
Y10T70/5721	12	Externally mounted locking device	CPCONLY	Y10T70/5721		131
Y10T70/5726	13	With padlock	CPCONLY	Y10T70/5726		142
Y10T70/573	11	Single	CPCONLY	Y10T70/573		183
Y10T70/5735	12	Externally mounted locking device	CPCONLY	Y10T70/5735		288
Y10T70/5739	13	With padlock	CPCONLY	Y10T70/5739		230
Y10T70/5743	12	Disconnectable	CPCONLY	Y10T70/5743		50
Y10T70/5748	12	Foldable	CPCONLY	Y10T70/5748		10
Y10T70/5752	12	Universal mounting	CPCONLY	Y10T70/5752		115
Y10T70/5757	10	Handle, handwheel or knob	CPCONLY	Y10T70/5757		99
Y10T70/5761	11	Retractable or flush handle	CPCONLY	Y10T70/5761		464
Y10T70/5765	11	Rotary or swinging	CPCONLY	Y10T70/5765		423
Y10T70/577	12	Locked stationary	CPCONLY	Y10T70/577		385
Y10T70/5774	13	Externally mounted locking device	CPCONLY	Y10T70/5774		281
Y10T70/5779	14	With padlock	CPCONLY	Y10T70/5779		301
Y10T70/5783	13	Combination lock	CPCONLY	Y10T70/5783		131
Y10T70/5788	14	Push pin or button	CPCONLY	Y10T70/5788		102
Y10T70/5792	13	Handle-carried key lock	CPCONLY	Y10T70/5792		125
Y10T70/5796	14	Coaxially mounted	CPCONLY	Y10T70/5796		191
Y10T70/5801	15	Axially movable bolt	CPCONLY	Y10T70/5801		29
Y10T70/5805	12	Freely movable when locked	CPCONLY	Y10T70/5805		196
Y10T70/581	13	Combination lock	CPCONLY	Y10T70/581		86
Y10T70/5814	14	Push pin or button	CPCONLY	Y10T70/5814		31
Y10T70/5819	13	Handle-carried key lock	CPCONLY	Y10T70/5819		157
Y10T70/5823	14	Coaxial clutch connection	CPCONLY	Y10T70/5823		76
Y10T70/5827	15	Axially movable clutch	CPCONLY	Y10T70/5827		214
Y10T70/5832	11	Lock and handle assembly	CPCONLY	Y10T70/5832		439
Y10T70/5836	10	Wheel	CPCONLY	Y10T70/5836		90
Y10T70/5841	11	Rotation blocking	CPCONLY	Y10T70/5841		467
Y10T70/5845	12	Spoke gap traversing type	CPCONLY	Y10T70/5845		253
Y10T70/585	12	Brake type	CPCONLY	Y10T70/585		63
Y10T70/5854	10	Bolt, nut, stud, stud-cap	CPCONLY	Y10T70/5854		82
Y10T70/5858	11	Locked stationary	CPCONLY	Y10T70/5858		211
Y10T70/5863	11	Freely movable when locked	CPCONLY	Y10T70/5863		138
Y10T70/5867	11	Encased	CPCONLY	Y10T70/5867		690
Y10T70/5872	9	For cycles	CPCONLY	Y10T70/5872		441
Y10T70/5876	10	Anchors	CPCONLY	Y10T70/5876		145
Y10T70/5881	10	Stands	CPCONLY	Y10T70/5881		81
Y10T70/5885	10	Drive	CPCONLY	Y10T70/5885		120
Y10T70/5889	9	For automotive vehicles	CPCONLY	Y10T70/5889		650
Y10T70/5894	10	Plural point	CPCONLY	Y10T70/5894		179
Y10T70/5898	11	With switch	CPCONLY	Y10T70/5898		82
Y10T70/5903	10	Hood	CPCONLY	Y10T70/5903		130
Y10T70/5907	11	With switch	CPCONLY	Y10T70/5907		86
Y10T70/5912	10	Fuel valve	CPCONLY	Y10T70/5912		139
Y10T70/5916	11	With switch	CPCONLY	Y10T70/5916		77
Y10T70/592	11	Cap combined	CPCONLY	Y10T70/592		11
Y10T70/5925	10	Transmission	CPCONLY	Y10T70/5925		90
Y10T70/5929	11	Cover combined	CPCONLY	Y10T70/5929		48
Y10T70/5934	11	Selective-type shift rod, fork or block	CPCONLY	Y10T70/5934		260
Y10T70/5938	12	With switch	CPCONLY	Y10T70/5938		131
Y10T70/5942	11	Planetary type	CPCONLY	Y10T70/5942		25
Y10T70/5947	12	With switch	CPCONLY	Y10T70/5947		5
Y10T70/5951	11	With switch	CPCONLY	Y10T70/5951		42
Y10T70/5956	10	Steering mechanism with switch	CPCONLY	Y10T70/5956		627
Y10T70/596	10	Pilot wheel control or linkage	CPCONLY	Y10T70/596		75
Y10T70/5965	10	Control levers with switch	CPCONLY	Y10T70/5965		82
Y10T70/5969	10	Other element with switch	CPCONLY	Y10T70/5969		103
Y10T70/5973	10	Remote control	CPCONLY	Y10T70/5973		196
Y10T70/5978	11	With switch	CPCONLY	Y10T70/5978		217
Y10T70/5982	10	Accessories	CPCONLY	Y10T70/5982		235
Y10T70/5987	11	Spare or mounted wheel or tire	CPCONLY	Y10T70/5987		312
Y10T70/5991	12	Tire or rim only	CPCONLY	Y10T70/5991		379
Y10T70/5996	9	For seats	CPCONLY	Y10T70/5996		74
Y10T70/60	8	Systems	CPCONLY	Y10T70/60		142
Y10T70/625	9	Operation and control	CPCONLY	Y10T70/625		170
Y10T70/65	10	Central control	CPCONLY	Y10T70/65		443
Y10T70/675	10	Serially operable	CPCONLY	Y10T70/675		58
Y10T70/70	8	Operating mechanism	CPCONLY	Y10T70/70		86
Y10T70/7006	9	Predetermined time interval controlled	CPCONLY	Y10T70/7006		94
Y10T70/7011	10	Positively initiated delay interval	CPCONLY	Y10T70/7011		57
Y10T70/7017	11	Interval terminating	CPCONLY	Y10T70/7017		74
Y10T70/7023	11	Repeating interval	CPCONLY	Y10T70/7023		12
Y10T70/7028	10	Electric	CPCONLY	Y10T70/7028		138
Y10T70/7034	10	Clockwork control	CPCONLY	Y10T70/7034		126
Y10T70/704	11	Continuously operating once initiated	CPCONLY	Y10T70/704		158
Y10T70/7045	12	Emergency release	CPCONLY	Y10T70/7045		51
Y10T70/7051	9	Using a powered device [e.g., motor]	CPCONLY	Y10T70/7051		171
Y10T70/7057	10	Permanent magnet	CPCONLY	Y10T70/7057		453
Y10T70/7062	10	Electrical type [e.g., solenoid]	CPCONLY	Y10T70/7062		697
Y10T70/7068	11	Actuated after correct combination recognized [e.g., numerical, alphabetical, or magnet[s] pattern]	CPCONLY	Y10T70/7068		289
Y10T70/7073	12	Including use of a key	CPCONLY	Y10T70/7073		135
Y10T70/7079	13	Key rotated [e.g., Eurocylinder]	CPCONLY	Y10T70/7079		186
Y10T70/7085	12	Using a dial having indicia or pointer and indicia	CPCONLY	Y10T70/7085		38
Y10T70/709	13	Plural interdependent or plural independently operable tumbler sets	CPCONLY	Y10T70/709		26
Y10T70/7096	13	With mechanism having rocker arm or linked bars	CPCONLY	Y10T70/7096		30
Y10T70/7102	11	And details of blocking system [e.g., linkage, latch, pawl, spring]	CPCONLY	Y10T70/7102		276
Y10T70/7107	11	And alternately mechanically actuated by a key, dial, etc.	CPCONLY	Y10T70/7107		352
Y10T70/7113	11	Projected and retracted electrically	CPCONLY	Y10T70/7113		200
Y10T70/7119	11	Projected electrically only	CPCONLY	Y10T70/7119		34
Y10T70/7124	11	Retracted electrically only	CPCONLY	Y10T70/7124		165
Y10T70/713	11	Dogging manual operator	CPCONLY	Y10T70/713		255
Y10T70/7136	11	Key initiated actuation of device	CPCONLY	Y10T70/7136		99
Y10T70/7141	9	Combination and key	CPCONLY	Y10T70/7141		249
Y10T70/7147	9	Combination or key	CPCONLY	Y10T70/7147		209
Y10T70/7153	9	Combination	CPCONLY	Y10T70/7153		70
Y10T70/7158	10	Individual blocking elements	CPCONLY	Y10T70/7158		66
Y10T70/7164	11	Selectively operable	CPCONLY	Y10T70/7164		100
Y10T70/7169	10	Complex movement or puzzle type	CPCONLY	Y10T70/7169		212
Y10T70/7175	11	Labyrinthian passage	CPCONLY	Y10T70/7175		67
Y10T70/7181	10	Tumbler type	CPCONLY	Y10T70/7181		20
Y10T70/7186	11	Plural interdependent sets	CPCONLY	Y10T70/7186		51
Y10T70/7192	11	Plural independently operable sets	CPCONLY	Y10T70/7192		99
Y10T70/7198	11	Single tumbler set	CPCONLY	Y10T70/7198		12
Y10T70/7203	12	With ball or roller	CPCONLY	Y10T70/7203		56
Y10T70/7209	12	Interset sliding tumblers	CPCONLY	Y10T70/7209		21
Y10T70/7215	12	Individually set sliding tumblers	CPCONLY	Y10T70/7215		29
Y10T70/722	13	Manually operable	CPCONLY	Y10T70/722		143
Y10T70/7226	13	Associated movable operator	CPCONLY	Y10T70/7226		144
Y10T70/7232	14	Removable	CPCONLY	Y10T70/7232		19
Y10T70/7237	12	Rotary or swinging tumblers	CPCONLY	Y10T70/7237		21
Y10T70/7243	13	Interset tumblers	CPCONLY	Y10T70/7243		68
Y10T70/7249	14	Tumblers released	CPCONLY	Y10T70/7249		228
Y10T70/7254	15	Fence held spaced from tumblers	CPCONLY	Y10T70/7254		141
Y10T70/726	13	Individually set	CPCONLY	Y10T70/726		232
Y10T70/7266	14	Movable selector	CPCONLY	Y10T70/7266		78
Y10T70/7271	14	Associated movable operator	CPCONLY	Y10T70/7271		179
Y10T70/7277	15	Removable	CPCONLY	Y10T70/7277		77
Y10T70/7282	15	Pin or rod and slot	CPCONLY	Y10T70/7282		29
Y10T70/7288	15	Spindle operator	CPCONLY	Y10T70/7288		78
Y10T70/7294	16	Concentric spindles	CPCONLY	Y10T70/7294		128
Y10T70/7299	16	Axially shiftable spindle	CPCONLY	Y10T70/7299		66
Y10T70/7305	14	Manually operable	CPCONLY	Y10T70/7305		606
Y10T70/7311	10	Step-by-step	CPCONLY	Y10T70/7311		145
Y10T70/7316	10	Combination upsetting	CPCONLY	Y10T70/7316		173
Y10T70/7322	10	Permutation	CPCONLY	Y10T70/7322		197
Y10T70/7328	11	Compound tumblers	CPCONLY	Y10T70/7328		168
Y10T70/7333	12	With fastener or holder	CPCONLY	Y10T70/7333		87
Y10T70/7339	12	Pin and socket	CPCONLY	Y10T70/7339		95
Y10T70/7345	11	Removable change element	CPCONLY	Y10T70/7345		36
Y10T70/735	10	Operating elements	CPCONLY	Y10T70/735		26
Y10T70/7356	11	Fences	CPCONLY	Y10T70/7356		32
Y10T70/7362	12	Bolt or lock housing supported	CPCONLY	Y10T70/7362		168
Y10T70/7367	11	Tumbler structure and position	CPCONLY	Y10T70/7367		164
Y10T70/7373	12	Nested	CPCONLY	Y10T70/7373		172
Y10T70/7379	12	Variant diameter	CPCONLY	Y10T70/7379		43
Y10T70/7384	12	Mounts	CPCONLY	Y10T70/7384		80
Y10T70/739	12	Motion-restraining means	CPCONLY	Y10T70/739		40
Y10T70/7395	13	Friction holder	CPCONLY	Y10T70/7395		122
Y10T70/7401	11	Spindles	CPCONLY	Y10T70/7401		113
Y10T70/7407	11	Operating indicators	CPCONLY	Y10T70/7407		128
Y10T70/7412	12	Portable combination setting guide	CPCONLY	Y10T70/7412		19
Y10T70/7418	12	Dials	CPCONLY	Y10T70/7418		110
Y10T70/7424	10	Tampering prevention or attach defeating	CPCONLY	Y10T70/7424		210
Y10T70/7429	11	Resonance type	CPCONLY	Y10T70/7429		17
Y10T70/7435	11	Hidden or covered dial	CPCONLY	Y10T70/7435		53
Y10T70/7441	9	Key	CPCONLY	Y10T70/7441		38
Y10T70/7446	10	Multiple keys	CPCONLY	Y10T70/7446		174
Y10T70/7452	11	Selective shutout type	CPCONLY	Y10T70/7452		67
Y10T70/7458	11	Interdependent	CPCONLY	Y10T70/7458		178
Y10T70/7463	11	Master- and change-key	CPCONLY	Y10T70/7463		215
Y10T70/7469	12	Change-key shutout	CPCONLY	Y10T70/7469		79
Y10T70/7475	12	Submaster- and change-key	CPCONLY	Y10T70/7475		19
Y10T70/748	13	Change-key shutout	CPCONLY	Y10T70/748		31
Y10T70/7486	10	Single key	CPCONLY	Y10T70/7486		198
Y10T70/7492	11	Tumblerless push or pull key	CPCONLY	Y10T70/7492		39
Y10T70/7497	11	Tumblerless warded	CPCONLY	Y10T70/7497		67
Y10T70/7503	11	Tumbler and ward type	CPCONLY	Y10T70/7503		49
Y10T70/7508	11	Tumbler type	CPCONLY	Y10T70/7508		49
Y10T70/7514	12	Sliding and rotary or swinging tumblers	CPCONLY	Y10T70/7514		26
Y10T70/752	12	Sliding tumblers	CPCONLY	Y10T70/752		47
Y10T70/7525	13	Longitudinal	CPCONLY	Y10T70/7525		51
Y10T70/7531	13	Transverse	CPCONLY	Y10T70/7531		205
Y10T70/7537	12	Rotary or swinging tumblers	CPCONLY	Y10T70/7537		61
Y10T70/7542	13	Single set	CPCONLY	Y10T70/7542		53
Y10T70/7548	14	Directly key engaged	CPCONLY	Y10T70/7548		296
Y10T70/7554	12	Cylinder type with auxiliary tumblers or wards	CPCONLY	Y10T70/7554		42
Y10T70/7559	12	Cylinder type	CPCONLY	Y10T70/7559		94
Y10T70/7565	13	Plural tumbler sets	CPCONLY	Y10T70/7565		277
Y10T70/7571	13	Concentric tumblers	CPCONLY	Y10T70/7571		35
Y10T70/7576	13	Sliding and rotary plug	CPCONLY	Y10T70/7576		225
Y10T70/7582	13	Sliding plug	CPCONLY	Y10T70/7582		74
Y10T70/7588	13	Rotary plug	CPCONLY	Y10T70/7588		106
Y10T70/7593	14	Sliding tumblers	CPCONLY	Y10T70/7593		364
Y10T70/7599	15	Transverse of plug	CPCONLY	Y10T70/7599		457
Y10T70/7605	16	Pin tumblers	CPCONLY	Y10T70/7605		558
Y10T70/761	17	Rotatable pins [e.g., MEDECO lock]	CPCONLY	Y10T70/761		50
Y10T70/7616	16	Including sidebar	CPCONLY	Y10T70/7616		204
Y10T70/7621	15	Including sidebar	CPCONLY	Y10T70/7621		49
Y10T70/7627	14	Rotary or swinging tumblers	CPCONLY	Y10T70/7627		87
Y10T70/7633	15	Transverse of plug	CPCONLY	Y10T70/7633		156
Y10T70/7638	13	Cylinder and plug assembly	CPCONLY	Y10T70/7638		215
Y10T70/7644	14	Key- and tool-controlled	CPCONLY	Y10T70/7644		127
Y10T70/765	14	Key only controlled	CPCONLY	Y10T70/765		223
Y10T70/7655	13	Cylinder attaching or mounting means	CPCONLY	Y10T70/7655		485
Y10T70/7661	13	Detachable or removable cylinder	CPCONLY	Y10T70/7661		372
Y10T70/7667	13	Operating elements, parts and adjuncts	CPCONLY	Y10T70/7667		141
Y10T70/7672	14	Cylinder	CPCONLY	Y10T70/7672		172
Y10T70/7678	15	Adjustable	CPCONLY	Y10T70/7678		53
Y10T70/7684	14	Plug	CPCONLY	Y10T70/7684		320
Y10T70/7689	14	Tumblers	CPCONLY	Y10T70/7689		55
Y10T70/7695	15	Plate	CPCONLY	Y10T70/7695		223
Y10T70/7701	15	Pin	CPCONLY	Y10T70/7701		245
Y10T70/7706	14	Operating connections	CPCONLY	Y10T70/7706		543
Y10T70/7712	15	Rollbacks	CPCONLY	Y10T70/7712		236
Y10T70/7718	15	Intermediate	CPCONLY	Y10T70/7718		42
Y10T70/7723	14	Cylinder rings	CPCONLY	Y10T70/7723		56
Y10T70/7729	10	Permutation	CPCONLY	Y10T70/7729		93
Y10T70/7734	11	Automatically key set combinations	CPCONLY	Y10T70/7734		202
Y10T70/774	11	Adjustable tumblers	CPCONLY	Y10T70/774		142
Y10T70/7746	12	Removable change element	CPCONLY	Y10T70/7746		104
Y10T70/7751	10	With ball or roller	CPCONLY	Y10T70/7751		227
Y10T70/7757	10	Push or pull key operation	CPCONLY	Y10T70/7757		278
Y10T70/7763	10	Key ejecting	CPCONLY	Y10T70/7763		91
Y10T70/7768	10	Key-removal preventing	CPCONLY	Y10T70/7768		219
Y10T70/7774	10	False or picking key trapping	CPCONLY	Y10T70/7774		69
Y10T70/778	10	Operating elements	CPCONLY	Y10T70/778		35
Y10T70/7785	11	Tumblers	CPCONLY	Y10T70/7785		108
Y10T70/7791	11	Keys	CPCONLY	Y10T70/7791		357
Y10T70/7797	12	Picking	CPCONLY	Y10T70/7797		93
Y10T70/7802	12	Multi-part structures	CPCONLY	Y10T70/7802		323
Y10T70/7808	13	With foldable shank or stem	CPCONLY	Y10T70/7808		46
Y10T70/7814	13	With extensible shank or stem	CPCONLY	Y10T70/7814		51
Y10T70/7819	13	With slidable bit portion	CPCONLY	Y10T70/7819		86
Y10T70/7825	13	With pivoted or swinging bit portion	CPCONLY	Y10T70/7825		139
Y10T70/7831	13	Nested second key	CPCONLY	Y10T70/7831		25
Y10T70/7836	12	Plural shanks, stems or bit wings	CPCONLY	Y10T70/7836		202
Y10T70/7842	12	Single shank or stem	CPCONLY	Y10T70/7842		41
Y10T70/7847	13	Round rigid	CPCONLY	Y10T70/7847		154
Y10T70/7853	14	Tubular	CPCONLY	Y10T70/7853		187
Y10T70/7859	13	Flat rigid	CPCONLY	Y10T70/7859		186
Y10T70/7864	14	Cylinder lock type	CPCONLY	Y10T70/7864		189
Y10T70/787	13	Irregular nonplanar or undulated	CPCONLY	Y10T70/787		163
Y10T70/7876	12	Bow or head	CPCONLY	Y10T70/7876		395
Y10T70/7881	12	Bitting	CPCONLY	Y10T70/7881		440
Y10T70/7887	13	Frangible	CPCONLY	Y10T70/7887		11
Y10T70/7893	13	Permutation	CPCONLY	Y10T70/7893		167
Y10T70/7898	13	Threaded	CPCONLY	Y10T70/7898		52
Y10T70/7904	12	Magnetic features	CPCONLY	Y10T70/7904		229
Y10T70/791	12	Ejecting feature	CPCONLY	Y10T70/791		53
Y10T70/7915	10	Tampering prevention or attack defeating	CPCONLY	Y10T70/7915		372
Y10T70/7921	11	Armoring	CPCONLY	Y10T70/7921		467
Y10T70/7927	11	Anti-jimmy	CPCONLY	Y10T70/7927		225
Y10T70/7932	11	Anti-pick	CPCONLY	Y10T70/7932		442
Y10T70/7938	12	Guard ward	CPCONLY	Y10T70/7938		61
Y10T70/7944	12	Guard tumbler	CPCONLY	Y10T70/7944		244
Y10T70/7949	11	Yielding or frangible connections	CPCONLY	Y10T70/7949		319
Y10T70/7955	11	Keyhole guards	CPCONLY	Y10T70/7955		285
Y10T70/796	12	Portable	CPCONLY	Y10T70/796		137
Y10T70/7966	12	Combination-controlled	CPCONLY	Y10T70/7966		48
Y10T70/7972	13	Portable	CPCONLY	Y10T70/7972		14
Y10T70/7977	12	Key-controlled	CPCONLY	Y10T70/7977		230
Y10T70/7983	13	Portable	CPCONLY	Y10T70/7983		144
Y10T70/7989	11	Key securers, fasteners or retainers	CPCONLY	Y10T70/7989		258
Y10T70/7994	12	Portable	CPCONLY	Y10T70/7994		221
Y10T70/80	8	Parts, attachments, accessories and adjuncts	CPCONLY	Y10T70/80		186
Y10T70/8027	9	Condition indicators	CPCONLY	Y10T70/8027		313
Y10T70/8054	10	With recorder	CPCONLY	Y10T70/8054		80
Y10T70/8081	11	Electric	CPCONLY	Y10T70/8081		61
Y10T70/8108	11	Padlock	CPCONLY	Y10T70/8108		14
Y10T70/8135	10	With register	CPCONLY	Y10T70/8135		61
Y10T70/8162	11	Padlock	CPCONLY	Y10T70/8162		78
Y10T70/8189	10	Contactual feeler	CPCONLY	Y10T70/8189		56
Y10T70/8216	10	Tampering detector	CPCONLY	Y10T70/8216		46
Y10T70/8243	11	With seal	CPCONLY	Y10T70/8243		113
Y10T70/827	10	Attention-directing	CPCONLY	Y10T70/827		124
Y10T70/8297	9	For combination-operated mechanism	CPCONLY	Y10T70/8297		88
Y10T70/8324	10	Housings	CPCONLY	Y10T70/8324		80
Y10T70/8351	10	Operating attachments	CPCONLY	Y10T70/8351		53
Y10T70/8378	10	Knobs, hand grips, etc.	CPCONLY	Y10T70/8378		74
Y10T70/8405	10	Combination finders	CPCONLY	Y10T70/8405		32
Y10T70/8432	9	For key-operated mechanism	CPCONLY	Y10T70/8432		176
Y10T70/8459	10	Housings	CPCONLY	Y10T70/8459		284
Y10T70/8486	11	Cylindrical	CPCONLY	Y10T70/8486		262
Y10T70/8514	11	Face plate	CPCONLY	Y10T70/8514		106
Y10T70/8541	11	Mounting arrangements	CPCONLY	Y10T70/8541		503
Y10T70/8568	10	Escutcheons	CPCONLY	Y10T70/8568		271
Y10T70/8595	10	Key guides, internal	CPCONLY	Y10T70/8595		190
Y10T70/8622	10	Key insertion guides	CPCONLY	Y10T70/8622		144
Y10T70/8649	10	Keyhole covers	CPCONLY	Y10T70/8649		463
Y10T70/8676	10	Key holders	CPCONLY	Y10T70/8676		1144
Y10T70/8703	11	Flexible	CPCONLY	Y10T70/8703		239
Y10T70/873	11	One-piece	CPCONLY	Y10T70/873		204
Y10T70/8757	11	Releasable catches	CPCONLY	Y10T70/8757		410
Y10T70/8784	11	Parallel key loops, coaxially mounted, individually movable	CPCONLY	Y10T70/8784		183
Y10T70/8811	10	Key identification	CPCONLY	Y10T70/8811		67
Y10T70/8838	9	Adjustment provisions	CPCONLY	Y10T70/8838		166
Y10T70/8865	9	Reversible structures	CPCONLY	Y10T70/8865		159
Y10T70/8892	9	Silencers or mufflers	CPCONLY	Y10T70/8892		114
Y10T70/8919	9	Antifriction provisions	CPCONLY	Y10T70/8919		159
Y10T70/8946	9	Emergency unlocking or release arrangements	CPCONLY	Y10T70/8946		168
Y10T70/8973	9	Mounting aids, guides and assistors	CPCONLY	Y10T70/8973		126
Y10T74/00	7	Machine element or mechanism	CPCONLY	Y10T74/00		1
Y10T74/10	8	High frequency vibratory devices	CPCONLY	Y10T74/10		61
Y10T74/11	8	Tripping mechanism	CPCONLY	Y10T74/11		1129
Y10T74/111	9	Speed controlled	CPCONLY	Y10T74/111		206
Y10T74/113	10	Valve gear trips [e.g., steam engine "Corliss" type]	CPCONLY	Y10T74/113		40
Y10T74/114	9	Retarded	CPCONLY	Y10T74/114		181
Y10T74/115	10	Plural, sequential, trip actuations	CPCONLY	Y10T74/115		106
Y10T74/116	10	Clock train	CPCONLY	Y10T74/116		202
Y10T74/118	11	Winding knob trip [e.g., alarm mechanism]	CPCONLY	Y10T74/118		71
Y10T74/119	9	Hit and miss	CPCONLY	Y10T74/119		34
Y10T74/12	8	Gyroscopes	CPCONLY	Y10T74/12		830
Y10T74/1204	9	with caging or parking means	CPCONLY	Y10T74/1204		200
Y10T74/1207	10	Rotor spin and cage release type	CPCONLY	Y10T74/1207		104
Y10T74/1211	10	and resetting means	CPCONLY	Y10T74/1211		29
Y10T74/1214	9	with gimbal lock preventing means	CPCONLY	Y10T74/1214		47
Y10T74/1218	9	Combined	CPCONLY	Y10T74/1218		251
Y10T74/1221	9	Multiple gyroscopes	CPCONLY	Y10T74/1221		337
Y10T74/1225	10	with rotor drives	CPCONLY	Y10T74/1225		112
Y10T74/1229	9	Gyroscope control	CPCONLY	Y10T74/1229		397
Y10T74/1232	10	Erecting	CPCONLY	Y10T74/1232		92
Y10T74/1236	11	by plural diverse forces	CPCONLY	Y10T74/1236		24
Y10T74/1239	11	by jet	CPCONLY	Y10T74/1239		158
Y10T74/1243	11	by weight	CPCONLY	Y10T74/1243		102
Y10T74/1246	11	by friction	CPCONLY	Y10T74/1246		31
Y10T74/125	11	by magnetic field	CPCONLY	Y10T74/125		183
Y10T74/1254	11	by motor torque	CPCONLY	Y10T74/1254		213
Y10T74/1257	10	Damping	CPCONLY	Y10T74/1257		293
Y10T74/1261	9	with pick off	CPCONLY	Y10T74/1261		235
Y10T74/1264	10	Optical	CPCONLY	Y10T74/1264		93
Y10T74/1268	10	Pneumatic	CPCONLY	Y10T74/1268		65
Y10T74/1271	10	Conducting liquid	CPCONLY	Y10T74/1271		48
Y10T74/1275	10	Electrical	CPCONLY	Y10T74/1275		243
Y10T74/1279	10	Electrical and magnetic	CPCONLY	Y10T74/1279		134
Y10T74/1282	9	with rotor drive	CPCONLY	Y10T74/1282		569
Y10T74/1286	9	Vertical gyroscopes	CPCONLY	Y10T74/1286		87
Y10T74/1289	9	Horizontal gyroscopes	CPCONLY	Y10T74/1289		49
Y10T74/1293	9	Flexure hinges for gyros	CPCONLY	Y10T74/1293		160
Y10T74/1296	9	Flywheel structure	CPCONLY	Y10T74/1296		35
Y10T74/13	8	Machine starters	CPCONLY	Y10T74/13		1181
Y10T74/131	9	Automatic	CPCONLY	Y10T74/131		917
Y10T74/132	10	Separate power mesher	CPCONLY	Y10T74/132		289
Y10T74/133	10	Holders	CPCONLY	Y10T74/133		121
Y10T74/134	10	Clutch connection	CPCONLY	Y10T74/134		400
Y10T74/136	10	Worm and wheel	CPCONLY	Y10T74/136		12
Y10T74/137	10	Reduction gearing	CPCONLY	Y10T74/137		331
Y10T74/138	9	Radial meshing	CPCONLY	Y10T74/138		171
Y10T74/139	9	Cam operated	CPCONLY	Y10T74/139		144
Y10T74/14	8	Rotary member or shaft indexing, e.g., tool or work turret	CPCONLY	Y10T74/14		386
Y10T74/1406	9	with safety device or drive disconnect	CPCONLY	Y10T74/1406		43
Y10T74/1412	9	with locating point adjusting	CPCONLY	Y10T74/1412		111
Y10T74/1418	9	Preselected indexed position	CPCONLY	Y10T74/1418		141
Y10T74/1424	10	Sequential	CPCONLY	Y10T74/1424		201
Y10T74/1429	11	Skip position	CPCONLY	Y10T74/1429		41
Y10T74/1435	11	Held by torque	CPCONLY	Y10T74/1435		29
Y10T74/1441	11	Geneva or mutilated gear drive	CPCONLY	Y10T74/1441		207
Y10T74/1447	11	Velocity control	CPCONLY	Y10T74/1447		85
Y10T74/1453	11	Interlocked rotator and brake	CPCONLY	Y10T74/1453		366
Y10T74/1459	12	Diverse-type brakes	CPCONLY	Y10T74/1459		47
Y10T74/1465	13	with axially acting friction brake	CPCONLY	Y10T74/1465		77
Y10T74/1471	9	Plural operators or input drives	CPCONLY	Y10T74/1471		51
Y10T74/1476	9	with means to axially shift shaft	CPCONLY	Y10T74/1476		244
Y10T74/1482	9	Single revolution input effects desired fractional output	CPCONLY	Y10T74/1482		49
Y10T74/1488	9	Control means	CPCONLY	Y10T74/1488		100
Y10T74/1494	9	Locking means	CPCONLY	Y10T74/1494		337
Y10T74/15	8	Intermittent grip type mechanical movement	CPCONLY	Y10T74/15		221
Y10T74/1502	9	Escapement	CPCONLY	Y10T74/1502		335
Y10T74/1503	9	Rotary to intermittent unidirectional motion	CPCONLY	Y10T74/1503		330
Y10T74/1505	10	Automatically controlled	CPCONLY	Y10T74/1505		103
Y10T74/1506	11	Speed	CPCONLY	Y10T74/1506		93
Y10T74/1508	10	Rotary crank or eccentric drive	CPCONLY	Y10T74/1508		371
Y10T74/151	11	Adjustable	CPCONLY	Y10T74/151		343
Y10T74/1511	11	Lever transmitter	CPCONLY	Y10T74/1511		122
Y10T74/1513	12	Adjustable leverage	CPCONLY	Y10T74/1513		277
Y10T74/1515	11	Rack and pinion transmitter	CPCONLY	Y10T74/1515		41
Y10T74/1516	12	Adjustable throw	CPCONLY	Y10T74/1516		70
Y10T74/1518	11	Rotary cam drive	CPCONLY	Y10T74/1518		83
Y10T74/1519	12	Adjustable throw	CPCONLY	Y10T74/1519		65
Y10T74/1521	13	Radial cam	CPCONLY	Y10T74/1521		168
Y10T74/1523	12	Radial cam	CPCONLY	Y10T74/1523		279
Y10T74/1524	10	Intermittently engaged clutch	CPCONLY	Y10T74/1524		366
Y10T74/1526	9	Oscillation or reciprocation to intermittent unidirectional motion	CPCONLY	Y10T74/1526		444
Y10T74/1527	10	Screw and nut devices	CPCONLY	Y10T74/1527		428
Y10T74/1529	10	Slide actuator	CPCONLY	Y10T74/1529		511
Y10T74/1531	11	Multiple acting	CPCONLY	Y10T74/1531		212
Y10T74/1532	10	Rack actuator	CPCONLY	Y10T74/1532		167
Y10T74/1534	11	Multiple acting	CPCONLY	Y10T74/1534		98
Y10T74/1535	12	Inwardly facing racks	CPCONLY	Y10T74/1535		94
Y10T74/1537	11	Oscillating	CPCONLY	Y10T74/1537		122
Y10T74/1539	12	Multiple acting	CPCONLY	Y10T74/1539		94
Y10T74/154	13	Inwardly facing racks	CPCONLY	Y10T74/154		30
Y10T74/1542	10	Strap actuator	CPCONLY	Y10T74/1542		
Y10T74/1544	11	Multiple acting	CPCONLY	Y10T74/1544		172
Y10T74/1545	12	Spring or weight return	CPCONLY	Y10T74/1545		66
Y10T74/1547	11	Single acting	CPCONLY	Y10T74/1547		66
Y10T74/1548	12	Engine starter type	CPCONLY	Y10T74/1548		25
Y10T74/155	13	Spring or weight return	CPCONLY	Y10T74/155		149
Y10T74/1552	12	Spring or weight return	CPCONLY	Y10T74/1552		157
Y10T74/1553	10	Lever actuator	CPCONLY	Y10T74/1553		156
Y10T74/1555	11	Rotary driven element	CPCONLY	Y10T74/1555		671
Y10T74/1556	12	Multiple acting	CPCONLY	Y10T74/1556		439
Y10T74/1558	9	Grip units and features	CPCONLY	Y10T74/1558		200
Y10T74/156	10	Compound movement handle	CPCONLY	Y10T74/156		63
Y10T74/1561	11	Reversible	CPCONLY	Y10T74/1561		72
Y10T74/1563	11	Transverse pivots	CPCONLY	Y10T74/1563		108
Y10T74/1565	10	Gripper releasing devices	CPCONLY	Y10T74/1565		317
Y10T74/1566	11	Power pawl lifter	CPCONLY	Y10T74/1566		173
Y10T74/1568	12	Automatic	CPCONLY	Y10T74/1568		130
Y10T74/1569	13	Idle stroke	CPCONLY	Y10T74/1569		257
Y10T74/1571	14	Cooperating holding pawl	CPCONLY	Y10T74/1571		150
Y10T74/1573	13	Power stroke	CPCONLY	Y10T74/1573		64
Y10T74/1574	12	Cooperating holding pawl	CPCONLY	Y10T74/1574		77
Y10T74/1576	11	Holding pawl lifter	CPCONLY	Y10T74/1576		185
Y10T74/1577	10	Gripper mountings, lever	CPCONLY	Y10T74/1577		319
Y10T74/1579	11	Reversible	CPCONLY	Y10T74/1579		269
Y10T74/1581	11	Multiple acting	CPCONLY	Y10T74/1581		71
Y10T74/1582	12	Single ratchet or clutch	CPCONLY	Y10T74/1582		91
Y10T74/1584	10	Gripper mountings, slide	CPCONLY	Y10T74/1584		159
Y10T74/1585	11	Multiple acting	CPCONLY	Y10T74/1585		47
Y10T74/1587	10	Grip features	CPCONLY	Y10T74/1587		328
Y10T74/1589	11	Driving band	CPCONLY	Y10T74/1589		53
Y10T74/159	12	Clamping	CPCONLY	Y10T74/159		94
Y10T74/1592	11	Driven band and gripper	CPCONLY	Y10T74/1592		54
Y10T74/1594	12	Positive grip	CPCONLY	Y10T74/1594		93
Y10T74/1595	11	Driving ratchet-bar or rack	CPCONLY	Y10T74/1595		71
Y10T74/1597	12	Multiple acting	CPCONLY	Y10T74/1597		66
Y10T74/1598	11	Driven ratchet-bar and power dog	CPCONLY	Y10T74/1598		232
Y10T74/16	8	Alternating-motion driven device with means during operation to adjust stroke	CPCONLY	Y10T74/16		54
Y10T74/1608	9	Constant length stroke with means to displace end limits	CPCONLY	Y10T74/1608		71
Y10T74/1616	10	Cyclical displacement responsive to the alternating-motion	CPCONLY	Y10T74/1616		30
Y10T74/1625	9	Stroke adjustable to zero and/or reversible in phasing	CPCONLY	Y10T74/1625		78
Y10T74/1633	10	Plural driving means to jointly drive the driven device	CPCONLY	Y10T74/1633		83
Y10T74/1642	10	Device driven from selected points on oscillating link	CPCONLY	Y10T74/1642		240
Y10T74/165	10	Driving lever with adjustable pivot point	CPCONLY	Y10T74/165		142
Y10T74/1658	10	Eccentric and strap drive, shiftable eccentric	CPCONLY	Y10T74/1658		34
Y10T74/1667	11	Changing the extent of eccentricity	CPCONLY	Y10T74/1667		59
Y10T74/1675	10	Crank pin drive, shiftable pin	CPCONLY	Y10T74/1675		63
Y10T74/1683	10	Cam and follower drive	CPCONLY	Y10T74/1683		105
Y10T74/1692	11	Axial-type cam [e.g., wabbler type]	CPCONLY	Y10T74/1692		40
Y10T74/17	8	Rotary driven device adjustable during operation relative to its supporting structure	CPCONLY	Y10T74/17		118
Y10T74/173	9	Screw and nut adjusting means	CPCONLY	Y10T74/173		354
Y10T74/177	9	Rack and pinion adjusting means	CPCONLY	Y10T74/177		170
Y10T74/18	8	Mechanical movements	CPCONLY	Y10T74/18		1
Y10T74/18008	9	Oscillating to reciprocating and alternating rotary	CPCONLY	Y10T74/18008		101
Y10T74/18016	9	Oscillating to reciprocating and intermittent rotary	CPCONLY	Y10T74/18016		119
Y10T74/18024	9	Rotary to reciprocating and rotary	CPCONLY	Y10T74/18024		754
Y10T74/18032	10	Rotary to reciprocating or rotary	CPCONLY	Y10T74/18032		56
Y10T74/1804	9	Rotary to reciprocating and alternating rotary	CPCONLY	Y10T74/1804		206
Y10T74/18048	9	Rotary to reciprocating and intermittent rotary	CPCONLY	Y10T74/18048		190
Y10T74/18056	9	Rotary to or from reciprocating or oscillating	CPCONLY	Y10T74/18056		1263
Y10T74/18064	10	Head motions	CPCONLY	Y10T74/18064		319
Y10T74/18072	10	Reciprocating carriage motions	CPCONLY	Y10T74/18072		511
Y10T74/1808	11	Phonograph type	CPCONLY	Y10T74/1808		97
Y10T74/18088	10	Rack and pinion type	CPCONLY	Y10T74/18088		374
Y10T74/18096	11	Shifting rack	CPCONLY	Y10T74/18096		563
Y10T74/18104	11	Shiftable pinion	CPCONLY	Y10T74/18104		187
Y10T74/18112	11	Segmental pinion	CPCONLY	Y10T74/18112		206
Y10T74/1812	11	Alternately rotated pinion	CPCONLY	Y10T74/1812		151
Y10T74/18128	11	Clutchable gears	CPCONLY	Y10T74/18128		102
Y10T74/18136	12	Bevel	CPCONLY	Y10T74/18136		146
Y10T74/18144	10	Overcoming dead center	CPCONLY	Y10T74/18144		356
Y10T74/18152	10	Belt or chain carried member	CPCONLY	Y10T74/18152		510
Y10T74/1816	10	Crank, lever, toggle, and slide	CPCONLY	Y10T74/1816		191
Y10T74/18168	10	Crank, lazy-tong, and slide	CPCONLY	Y10T74/18168		97
Y10T74/18176	10	Crank, pitman, lever, and slide	CPCONLY	Y10T74/18176		712
Y10T74/18182	11	Pump jack type	CPCONLY	Y10T74/18182		535
Y10T74/18184	10	Crank, pitman, and lever	CPCONLY	Y10T74/18184		781
Y10T74/182	11	Multiple levers	CPCONLY	Y10T74/182		201
Y10T74/18208	10	Crank, pitman, and slide	CPCONLY	Y10T74/18208		1543
Y10T74/18216	10	Crank, lever, and slide	CPCONLY	Y10T74/18216		305
Y10T74/18224	11	Rack connections	CPCONLY	Y10T74/18224		114
Y10T74/18232	10	Crank and lever	CPCONLY	Y10T74/18232		255
Y10T74/1824	11	Slidable connections	CPCONLY	Y10T74/1824		275
Y10T74/18248	10	Crank and slide	CPCONLY	Y10T74/18248		276
Y10T74/18256	11	Slidable connections [e.g., scotch yoke]	CPCONLY	Y10T74/18256		678
Y10T74/18264	10	Crank and multiple pitmans	CPCONLY	Y10T74/18264		164
Y10T74/18272	10	Planetary gearing and slide	CPCONLY	Y10T74/18272		306
Y10T74/1828	10	Cam, lever, and slide	CPCONLY	Y10T74/1828		724
Y10T74/18288	10	Cam and lever	CPCONLY	Y10T74/18288		669
Y10T74/18296	10	Cam and slide	CPCONLY	Y10T74/18296		1046
Y10T74/18304	11	Axial cam	CPCONLY	Y10T74/18304		453
Y10T74/18312	12	Grooved	CPCONLY	Y10T74/18312		749
Y10T74/1832	13	Multiple screw	CPCONLY	Y10T74/1832		115
Y10T74/18328	13	Alternately rotated screw	CPCONLY	Y10T74/18328		183
Y10T74/18336	11	Wabbler type	CPCONLY	Y10T74/18336		888
Y10T74/18344	10	Unbalanced weights	CPCONLY	Y10T74/18344		673
Y10T74/18352	10	Trammel-pitman	CPCONLY	Y10T74/18352		54
Y10T74/1836	9	Rotary to rotary	CPCONLY	Y10T74/1836		564
Y10T74/18368	10	Inertia or centrifugal transmitters	CPCONLY	Y10T74/18368		169
Y10T74/18376	10	Crank, pitman, lever, and crank	CPCONLY	Y10T74/18376		52
Y10T74/18384	10	Crank, lever, and crank	CPCONLY	Y10T74/18384		98
Y10T74/18392	10	Crank, pitman, and crank	CPCONLY	Y10T74/18392		132
Y10T74/184	10	Cranks, link connected	CPCONLY	Y10T74/184		109
Y10T74/18408	10	Cranks, slidable connections	CPCONLY	Y10T74/18408		146
Y10T74/18416	9	Rotary to alternating rotary	CPCONLY	Y10T74/18416		297
Y10T74/18424	10	Mangle connections	CPCONLY	Y10T74/18424		47
Y10T74/18432	11	Shiftable driven gear	CPCONLY	Y10T74/18432		22
Y10T74/1844	12	Central teeth	CPCONLY	Y10T74/1844		39
Y10T74/18448	11	Mutilated gearing connections	CPCONLY	Y10T74/18448		119
Y10T74/18456	10	Crank, pitman, and lever	CPCONLY	Y10T74/18456		215
Y10T74/18464	10	Reciprocating rack connections	CPCONLY	Y10T74/18464		53
Y10T74/18472	11	Crank and pitman actuator	CPCONLY	Y10T74/18472		82
Y10T74/1848	11	Simple crank actuator	CPCONLY	Y10T74/1848		121
Y10T74/18488	10	Oscillating rack connections	CPCONLY	Y10T74/18488		69
Y10T74/18496	11	Mangle actuated	CPCONLY	Y10T74/18496		22
Y10T74/18504	11	Crank and pitman actuator	CPCONLY	Y10T74/18504		148
Y10T74/18512	10	Flexible connector type	CPCONLY	Y10T74/18512		74
Y10T74/1852	10	Associated inertia devices	CPCONLY	Y10T74/1852		20
Y10T74/18528	9	Rotary to intermittent unidirectional motion	CPCONLY	Y10T74/18528		591
Y10T74/18536	10	Space machines	CPCONLY	Y10T74/18536		94
Y10T74/18544	9	Rotary to gyratory	CPCONLY	Y10T74/18544		376
Y10T74/18552	10	Unbalanced weight	CPCONLY	Y10T74/18552		539
Y10T74/1856	9	Reciprocating or oscillating to intermittent unidirectional motion	CPCONLY	Y10T74/1856		268
Y10T74/18568	9	Reciprocating or oscillating to or from alternating rotary	CPCONLY	Y10T74/18568		528
Y10T74/18576	10	including screw and nut	CPCONLY	Y10T74/18576		950
Y10T74/18584	11	Shaft shorter than nut	CPCONLY	Y10T74/18584		51
Y10T74/18592	11	Auxiliary drive [e.g., fluid piston, etc.] for load	CPCONLY	Y10T74/18592		89
Y10T74/186	11	Alternate power path operable on failure of primary	CPCONLY	Y10T74/186		69
Y10T74/18608	11	Single input split into two intermediate outputs that are subsequently superposed into a single output	CPCONLY	Y10T74/18608		65
Y10T74/18616	11	Single input, plural outputs	CPCONLY	Y10T74/18616		153
Y10T74/18624	11	Plural inputs, single output	CPCONLY	Y10T74/18624		84
Y10T74/18632	12	Plural nuts driving shaft	CPCONLY	Y10T74/18632		33
Y10T74/1864	12	Shaft and nut driven	CPCONLY	Y10T74/1864		57
Y10T74/18648	11	Carriage surrounding, guided by, and primarily supported by member other than screw [e.g., linear guide, etc.]	CPCONLY	Y10T74/18648		255
Y10T74/18656	11	Carriage surrounded, guided, and primarily supported by member other than screw [e.g., linear guide, etc.]	CPCONLY	Y10T74/18656		210
Y10T74/18664	11	Shaft moves through rotary drive means	CPCONLY	Y10T74/18664		174
Y10T74/18672	11	Plural screws in series [e.g., telescoping, etc.]	CPCONLY	Y10T74/18672		203
Y10T74/1868	11	Deflection related	CPCONLY	Y10T74/1868		152
Y10T74/18688	11	Limit stop	CPCONLY	Y10T74/18688		367
Y10T74/18696	11	including means to selectively transmit power [e.g., clutch, etc.]	CPCONLY	Y10T74/18696		356
Y10T74/18704	11	Means to selectively lock or retard screw or nut	CPCONLY	Y10T74/18704		256
Y10T74/18712	11	Contamination related	CPCONLY	Y10T74/18712		117
Y10T74/1872	12	Imperforate enclosure	CPCONLY	Y10T74/1872		104
Y10T74/18728	11	Backlash	CPCONLY	Y10T74/18728		201
Y10T74/18736	11	Pressurized fluid introduced between nut and screw	CPCONLY	Y10T74/18736		25
Y10T74/18744	11	Lubrication	CPCONLY	Y10T74/18744		109
Y10T74/18752	11	Manually driven	CPCONLY	Y10T74/18752		461
Y10T74/1876	10	including inertia device	CPCONLY	Y10T74/1876		40
Y10T74/18768	11	with rack and pinion	CPCONLY	Y10T74/18768		84
Y10T74/18776	12	Rectilinear rack	CPCONLY	Y10T74/18776		83
Y10T74/18784	10	including bevel gears	CPCONLY	Y10T74/18784		97
Y10T74/18792	10	including worm	CPCONLY	Y10T74/18792		404
Y10T74/188	10	including spur gear	CPCONLY	Y10T74/188		110
Y10T74/18808	11	with rack	CPCONLY	Y10T74/18808		456
Y10T74/18816	12	Curvilinear rack	CPCONLY	Y10T74/18816		153
Y10T74/18824	13	with biasing means	CPCONLY	Y10T74/18824		98
Y10T74/18832	10	including flexible drive connector [e.g., belt, chain, strand, etc.]	CPCONLY	Y10T74/18832		426
Y10T74/1884	11	with sprocket wheel	CPCONLY	Y10T74/1884		202
Y10T74/18848	11	with pulley	CPCONLY	Y10T74/18848		503
Y10T74/18856	9	Oscillating to oscillating	CPCONLY	Y10T74/18856		716
Y10T74/18864	10	Snap action	CPCONLY	Y10T74/18864		528
Y10T74/18872	11	Plate spring	CPCONLY	Y10T74/18872		68
Y10T74/1888	10	Geared connections	CPCONLY	Y10T74/1888		186
Y10T74/18888	9	Reciprocating to or from oscillating	CPCONLY	Y10T74/18888		636
Y10T74/18896	10	Snap action	CPCONLY	Y10T74/18896		523
Y10T74/18904	11	Plate spring	CPCONLY	Y10T74/18904		163
Y10T74/18912	10	Compound lever and slide	CPCONLY	Y10T74/18912		137
Y10T74/1892	10	Lever and slide	CPCONLY	Y10T74/1892		339
Y10T74/18928	11	Straight line motions	CPCONLY	Y10T74/18928		368
Y10T74/18936	11	Slidable connections	CPCONLY	Y10T74/18936		300
Y10T74/18944	11	Link connections	CPCONLY	Y10T74/18944		373
Y10T74/18952	11	toggle transmissions	CPCONLY	Y10T74/18952		154
Y10T74/1896	11	Cam connections	CPCONLY	Y10T74/1896		390
Y10T74/18968	11	Flexible connections	CPCONLY	Y10T74/18968		324
Y10T74/18976	10	Rack and pinion	CPCONLY	Y10T74/18976		319
Y10T74/18984	10	Inclined ramp	CPCONLY	Y10T74/18984		141
Y10T74/18992	9	Reciprocating to reciprocating	CPCONLY	Y10T74/18992		1248
Y10T74/19	8	Gearing	CPCONLY	Y10T74/19		737
Y10T74/19005	9	Nonplanetary gearing differential type [e.g., gearless differentials]	CPCONLY	Y10T74/19005		774
Y10T74/19009	9	Single gearing unit includes fluid drive	CPCONLY	Y10T74/19009		78
Y10T74/19014	9	Plural prime movers selectively coupled to common output	CPCONLY	Y10T74/19014		616
Y10T74/19019	9	Plural power paths from prime mover	CPCONLY	Y10T74/19019		271
Y10T74/19023	9	Plural power paths to and/or from gearing	CPCONLY	Y10T74/19023		353
Y10T74/19028	10	Alternate input connections single hand crank	CPCONLY	Y10T74/19028		71
Y10T74/19033	10	Fluid drive divides or combines alternate paths	CPCONLY	Y10T74/19033		106
Y10T74/19037	10	One path includes fluid drive	CPCONLY	Y10T74/19037		275
Y10T74/19042	10	Friction-type gearing	CPCONLY	Y10T74/19042		347
Y10T74/19047	10	Worm-type gearing	CPCONLY	Y10T74/19047		144
Y10T74/19051	10	Single driven plural drives	CPCONLY	Y10T74/19051		230
Y10T74/19056	11	Parallel	CPCONLY	Y10T74/19056		288
Y10T74/1906	11	Nonparallel	CPCONLY	Y10T74/1906		92
Y10T74/19065	11	Aligned	CPCONLY	Y10T74/19065		82
Y10T74/1907	11	Parallel and aligned	CPCONLY	Y10T74/1907		34
Y10T74/19074	10	Single drive plural driven	CPCONLY	Y10T74/19074		233
Y10T74/19079	11	Parallel	CPCONLY	Y10T74/19079		154
Y10T74/19084	12	Spur	CPCONLY	Y10T74/19084		547
Y10T74/19088	12	Bevel	CPCONLY	Y10T74/19088		243
Y10T74/19093	12	Spur and bevel	CPCONLY	Y10T74/19093		96
Y10T74/19098	12	Helical	CPCONLY	Y10T74/19098		95
Y10T74/19102	12	Belt or chain	CPCONLY	Y10T74/19102		213
Y10T74/19107	11	Nonparallel	CPCONLY	Y10T74/19107		186
Y10T74/19112	11	Aligned	CPCONLY	Y10T74/19112		122
Y10T74/19116	12	Vehicle	CPCONLY	Y10T74/19116		238
Y10T74/19121	11	Concentric	CPCONLY	Y10T74/19121		196
Y10T74/19126	10	Plural drivers plural driven	CPCONLY	Y10T74/19126		164
Y10T74/1913	11	Bevel	CPCONLY	Y10T74/1913		61
Y10T74/19135	11	Spur	CPCONLY	Y10T74/19135		92
Y10T74/1914	10	Alternate drivers and driven	CPCONLY	Y10T74/1914		158
Y10T74/19144	10	Miscellaneous [plural power paths]	CPCONLY	Y10T74/19144		71
Y10T74/19149	9	with fluid drive	CPCONLY	Y10T74/19149		269
Y10T74/19153	10	Condition responsive control	CPCONLY	Y10T74/19153		181
Y10T74/19158	10	with one or more controllers for gearing, fluid drive, or clutch	CPCONLY	Y10T74/19158		204
Y10T74/19163	11	with interrelated controls	CPCONLY	Y10T74/19163		136
Y10T74/19167	9	In series plural interchangeably locked nonplanetary units	CPCONLY	Y10T74/19167		547
Y10T74/19172	9	Reversal of direction of power flow changes power transmission to alternate path	CPCONLY	Y10T74/19172		337
Y10T74/19177	10	Input and output exchange functions	CPCONLY	Y10T74/19177		59
Y10T74/19181	9	toothed gear and recirculated unconnected elements	CPCONLY	Y10T74/19181		88
Y10T74/19186	9	Alternating rotary or continuous	CPCONLY	Y10T74/19186		61
Y10T74/19191	9	Alternating rotary	CPCONLY	Y10T74/19191		64
Y10T74/19195	10	Progressive	CPCONLY	Y10T74/19195		53
Y10T74/192	10	Shiftable and/or slidable gears	CPCONLY	Y10T74/192		87
Y10T74/19205	10	Clutchable gears	CPCONLY	Y10T74/19205		131
Y10T74/1921	11	On single driven member	CPCONLY	Y10T74/1921		111
Y10T74/19214	11	On single driving member	CPCONLY	Y10T74/19214		140
Y10T74/19219	9	Interchangeably locked	CPCONLY	Y10T74/19219		665
Y10T74/19223	10	Disconnectable counter shaft	CPCONLY	Y10T74/19223		290
Y10T74/19228	10	Multiple concentric clutch shafts	CPCONLY	Y10T74/19228		733
Y10T74/19233	10	Plurality of counter shafts	CPCONLY	Y10T74/19233		883
Y10T74/19237	10	Internal-external gears	CPCONLY	Y10T74/19237		205
Y10T74/19242	10	Combined gear and clutch	CPCONLY	Y10T74/19242		1167
Y10T74/19247	11	Preselector	CPCONLY	Y10T74/19247		577
Y10T74/19251	10	Control mechanism	CPCONLY	Y10T74/19251		1654
Y10T74/19256	11	Automatic	CPCONLY	Y10T74/19256		
Y10T74/1926	12	Speed responsive	CPCONLY	Y10T74/1926		741
Y10T74/19265	13	Governor	CPCONLY	Y10T74/19265		555
Y10T74/1927	13	with belt gearing	CPCONLY	Y10T74/1927		38
Y10T74/19274	12	torque responsive	CPCONLY	Y10T74/19274		346
Y10T74/19279	11	Cam operated	CPCONLY	Y10T74/19279		506
Y10T74/19284	10	Meshing assisters	CPCONLY	Y10T74/19284		1038
Y10T74/19288	11	Double clutch and interposed transmission	CPCONLY	Y10T74/19288		233
Y10T74/19293	10	Longitudinally slidable	CPCONLY	Y10T74/19293		
Y10T74/19298	11	Multiple spur gears	CPCONLY	Y10T74/19298		
Y10T74/19302	12	with tumbler gear	CPCONLY	Y10T74/19302		83
Y10T74/19307	12	Selective	CPCONLY	Y10T74/19307		347
Y10T74/19312	13	Direct clutch and drive	CPCONLY	Y10T74/19312		384
Y10T74/19316	12	Progressive	CPCONLY	Y10T74/19316		174
Y10T74/19321	13	Direct clutch and drive	CPCONLY	Y10T74/19321		72
Y10T74/19326	12	Fluid operated	CPCONLY	Y10T74/19326		292
Y10T74/1933	11	Multiple bevel gears	CPCONLY	Y10T74/1933		108
Y10T74/19335	11	Single spur gear	CPCONLY	Y10T74/19335		
Y10T74/1934	12	Tumbler and cone	CPCONLY	Y10T74/1934		266
Y10T74/19344	13	Multiple cone	CPCONLY	Y10T74/19344		63
Y10T74/19349	11	Single bevel gear	CPCONLY	Y10T74/19349		57
Y10T74/19353	11	Pin or crown gears	CPCONLY	Y10T74/19353		115
Y10T74/19358	10	Laterally slidable gears	CPCONLY	Y10T74/19358		149
Y10T74/19363	11	Rotary carriage	CPCONLY	Y10T74/19363		108
Y10T74/19367	11	Swinging carriage	CPCONLY	Y10T74/19367		304
Y10T74/19372	10	Single forward and reverse speeds	CPCONLY	Y10T74/19372		450
Y10T74/19377	10	Slidable keys or clutches	CPCONLY	Y10T74/19377		
Y10T74/19381	11	Alternative clutch shaft	CPCONLY	Y10T74/19381		66
Y10T74/19386	11	Multiple clutch shafts	CPCONLY	Y10T74/19386		
Y10T74/19391	12	Progressive	CPCONLY	Y10T74/19391		142
Y10T74/19395	13	Keys simultaneously slidable	CPCONLY	Y10T74/19395		91
Y10T74/194	12	Selective	CPCONLY	Y10T74/194		567
Y10T74/19405	12	Multiple forward and reverse	CPCONLY	Y10T74/19405		341
Y10T74/19409	12	Single forward and reverse	CPCONLY	Y10T74/19409		168
Y10T74/19414	11	Single clutch shaft	CPCONLY	Y10T74/19414		
Y10T74/19419	12	Progressive	CPCONLY	Y10T74/19419		
Y10T74/19423	13	Multiple key	CPCONLY	Y10T74/19423		47
Y10T74/19428	14	Spur	CPCONLY	Y10T74/19428		198
Y10T74/19433	15	Fluid operated	CPCONLY	Y10T74/19433		547
Y10T74/19437	15	Electrically operated	CPCONLY	Y10T74/19437		414
Y10T74/19442	13	Single key	CPCONLY	Y10T74/19442		88
Y10T74/19447	14	Clutch and ratchet	CPCONLY	Y10T74/19447		359
Y10T74/19451	14	Spur gears	CPCONLY	Y10T74/19451		67
Y10T74/19456	15	Intermediate clutch	CPCONLY	Y10T74/19456		234
Y10T74/1946	15	Sliding clutch carrier	CPCONLY	Y10T74/1946		285
Y10T74/19465	15	Sliding clutch operator	CPCONLY	Y10T74/19465		198
Y10T74/1947	12	Selective	CPCONLY	Y10T74/1947		52
Y10T74/19474	13	Multiple key	CPCONLY	Y10T74/19474		57
Y10T74/19479	14	Spur gears	CPCONLY	Y10T74/19479		351
Y10T74/19484	12	Single speed forward and reverse	CPCONLY	Y10T74/19484		106
Y10T74/19488	13	Spur gears	CPCONLY	Y10T74/19488		360
Y10T74/19493	13	Bevel gears	CPCONLY	Y10T74/19493		408
Y10T74/19498	13	Bevel and idler gears	CPCONLY	Y10T74/19498		112
Y10T74/19502	9	Pivotally supported	CPCONLY	Y10T74/19502		142
Y10T74/19507	10	Windmill turntable	CPCONLY	Y10T74/19507		63
Y10T74/19512	10	Screw	CPCONLY	Y10T74/19512		62
Y10T74/19516	10	Spur	CPCONLY	Y10T74/19516		184
Y10T74/19521	10	Bevel	CPCONLY	Y10T74/19521		232
Y10T74/19526	11	Wheel type	CPCONLY	Y10T74/19526		102
Y10T74/1953	11	Wringer type	CPCONLY	Y10T74/1953		129
Y10T74/19535	9	Follow-up mechanism	CPCONLY	Y10T74/19535		304
Y10T74/1954	9	Eccentric driving shaft and axle	CPCONLY	Y10T74/1954		425
Y10T74/19545	9	Central driving shaft in axle	CPCONLY	Y10T74/19545		219
Y10T74/1955	9	Parallel shafts, adjustable gear mesh	CPCONLY	Y10T74/1955		101
Y10T74/19555	9	Varying speed ratio	CPCONLY	Y10T74/19555		345
Y10T74/1956	9	Adjustable	CPCONLY	Y10T74/1956		478
Y10T74/19565	10	Relative movable axes	CPCONLY	Y10T74/19565		254
Y10T74/1957	11	Parallel shafts	CPCONLY	Y10T74/1957		378
Y10T74/19575	11	Automatic control	CPCONLY	Y10T74/19575		83
Y10T74/1958	12	Parallel shafts	CPCONLY	Y10T74/1958		99
Y10T74/19585	10	Fixed axes	CPCONLY	Y10T74/19585		194
Y10T74/1959	11	Parallel shafts	CPCONLY	Y10T74/1959		114
Y10T74/19595	11	Automatic control	CPCONLY	Y10T74/19595		84
Y10T74/196	12	Parallel shafts	CPCONLY	Y10T74/196		42
Y10T74/19605	9	Reversing means	CPCONLY	Y10T74/19605		163
Y10T74/19609	10	Governor control	CPCONLY	Y10T74/19609		102
Y10T74/19614	9	Disconnecting means	CPCONLY	Y10T74/19614		862
Y10T74/19619	9	Displaceable elements	CPCONLY	Y10T74/19619		79
Y10T74/19623	9	Backlash take-up	CPCONLY	Y10T74/19623		970
Y10T74/19628	9	Pressure distributing	CPCONLY	Y10T74/19628		813
Y10T74/19633	9	Yieldability in gear trains	CPCONLY	Y10T74/19633		800
Y10T74/19637	9	with brake means for gearing	CPCONLY	Y10T74/19637		401
Y10T74/19642	9	Directly cooperating gears	CPCONLY	Y10T74/19642		364
Y10T74/19647	10	Parallel axes or shafts	CPCONLY	Y10T74/19647		351
Y10T74/19651	11	External type	CPCONLY	Y10T74/19651		290
Y10T74/19656	12	Pin teeth	CPCONLY	Y10T74/19656		129
Y10T74/1966	10	Intersecting axes	CPCONLY	Y10T74/1966		284
Y10T74/19665	11	Bevel gear type	CPCONLY	Y10T74/19665		616
Y10T74/1967	10	Rack and pinion	CPCONLY	Y10T74/1967		1234
Y10T74/19674	10	Spur and bevel	CPCONLY	Y10T74/19674		225
Y10T74/19679	10	Spur	CPCONLY	Y10T74/19679		962
Y10T74/19684	11	Motor and gearing	CPCONLY	Y10T74/19684		545
Y10T74/19688	10	Bevel	CPCONLY	Y10T74/19688		391
Y10T74/19693	11	Motor vehicle drive	CPCONLY	Y10T74/19693		230
Y10T74/19698	10	Spiral	CPCONLY	Y10T74/19698		160
Y10T74/19702	11	Screw and nut	CPCONLY	Y10T74/19702		228
Y10T74/19707	12	Plural longitudinally variably spaced nuts	CPCONLY	Y10T74/19707		56
Y10T74/19712	12	Threadless	CPCONLY	Y10T74/19712		30
Y10T74/19716	12	Non-linear screw	CPCONLY	Y10T74/19716		35
Y10T74/19721	12	Thread geometry	CPCONLY	Y10T74/19721		240
Y10T74/19726	13	Thread pitch varies over axial length	CPCONLY	Y10T74/19726		17
Y10T74/1973	13	Shaft thread is spirally wound wire	CPCONLY	Y10T74/1973		67
Y10T74/19735	12	Nut disengageable from screw	CPCONLY	Y10T74/19735		255
Y10T74/1974	13	Nut segments hinged parallel to shaft [e.g., clam shell-type, etc.]	CPCONLY	Y10T74/1974		80
Y10T74/19744	12	Rolling element engaging thread	CPCONLY	Y10T74/19744		115
Y10T74/19749	13	Recirculating rolling elements	CPCONLY	Y10T74/19749		252
Y10T74/19753	14	Plural independent recirculating element paths	CPCONLY	Y10T74/19753		61
Y10T74/19758	14	Single thread common to plural paths	CPCONLY	Y10T74/19758		14
Y10T74/19763	14	Roller return path in shaft	CPCONLY	Y10T74/19763		27
Y10T74/19767	14	Return path geometry	CPCONLY	Y10T74/19767		190
Y10T74/19772	15	Rolling element deflector	CPCONLY	Y10T74/19772		205
Y10T74/19777	14	Interconnected or cooperating rollers or roller structure	CPCONLY	Y10T74/19777		77
Y10T74/19781	13	Non-recirculating rolling elements	CPCONLY	Y10T74/19781		75
Y10T74/19786	14	Captured sphere	CPCONLY	Y10T74/19786		64
Y10T74/19791	14	Cylindrical or quasi-cylindrical roller element [e.g., inclined roller, etc.]	CPCONLY	Y10T74/19791		36
Y10T74/19795	15	Parallel to shaft	CPCONLY	Y10T74/19795		136
Y10T74/198	15	Perpendicular to shaft	CPCONLY	Y10T74/198		33
Y10T74/19805	12	Less than 360 degrees of contact between nut and screw	CPCONLY	Y10T74/19805		152
Y10T74/19809	13	Independent nut segments	CPCONLY	Y10T74/19809		36
Y10T74/19814	14	Integral deformable tangs engaging screw	CPCONLY	Y10T74/19814		16
Y10T74/19819	11	Driven rack or shaft	CPCONLY	Y10T74/19819		143
Y10T74/19823	11	Screw	CPCONLY	Y10T74/19823		147
Y10T74/19828	11	Worm	CPCONLY	Y10T74/19828		1285
Y10T74/19833	12	Variable speed	CPCONLY	Y10T74/19833		89
Y10T74/19837	12	Intermittent motion	CPCONLY	Y10T74/19837		95
Y10T74/19842	12	Distribution of pressure	CPCONLY	Y10T74/19842		152
Y10T74/19847	10	torque actuated safety devices	CPCONLY	Y10T74/19847		59
Y10T74/19851	9	Gear and rotary bodies	CPCONLY	Y10T74/19851		132
Y10T74/19856	10	Laterally-spaced wheels	CPCONLY	Y10T74/19856		277
Y10T74/1986	10	Radially-spaced wheels	CPCONLY	Y10T74/1986		40
Y10T74/19865	10	with flywheel	CPCONLY	Y10T74/19865		61
Y10T74/1987	9	Rotary bodies	CPCONLY	Y10T74/1987		347
Y10T74/19874	10	Mutilated	CPCONLY	Y10T74/19874		386
Y10T74/19879	10	Geneva	CPCONLY	Y10T74/19879		506
Y10T74/19884	10	Irregular teeth and bodies	CPCONLY	Y10T74/19884		311
Y10T74/19888	10	External and internal teeth	CPCONLY	Y10T74/19888		79
Y10T74/19893	10	Sectional	CPCONLY	Y10T74/19893		175
Y10T74/19898	11	Backlash take-up	CPCONLY	Y10T74/19898		395
Y10T74/19902	12	Screw and nut	CPCONLY	Y10T74/19902		324
Y10T74/19907	11	Sound deadening	CPCONLY	Y10T74/19907		320
Y10T74/19912	11	Differential disks	CPCONLY	Y10T74/19912		28
Y10T74/19916	11	Multiple disks	CPCONLY	Y10T74/19916		240
Y10T74/19921	11	Separate rim	CPCONLY	Y10T74/19921		144
Y10T74/19926	12	Detachable	CPCONLY	Y10T74/19926		140
Y10T74/1993	11	Segmental rim	CPCONLY	Y10T74/1993		140
Y10T74/19935	11	Sheet metal	CPCONLY	Y10T74/19935		137
Y10T74/1994	11	Diametrically split	CPCONLY	Y10T74/1994		65
Y10T74/19944	11	Shaft-admitting insert	CPCONLY	Y10T74/19944		44
Y10T74/19949	9	Teeth	CPCONLY	Y10T74/19949		206
Y10T74/19953	10	Worm and helical	CPCONLY	Y10T74/19953		425
Y10T74/19958	10	Bevel	CPCONLY	Y10T74/19958		209
Y10T74/19963	10	Spur	CPCONLY	Y10T74/19963		325
Y10T74/19967	11	Yieldable	CPCONLY	Y10T74/19967		211
Y10T74/19972	11	form	CPCONLY	Y10T74/19972		546
Y10T74/19977	12	Antifriction	CPCONLY	Y10T74/19977		74
Y10T74/19981	13	Roller	CPCONLY	Y10T74/19981		120
Y10T74/19986	12	Twisted	CPCONLY	Y10T74/19986		127
Y10T74/19991	9	Lubrication	CPCONLY	Y10T74/19991		604
Y10T74/19995	10	Teeth	CPCONLY	Y10T74/19995		112
Y10T74/20	8	Control lever and linkage systems	CPCONLY	Y10T74/20		625
Y10T74/20006	9	Resilient connections	CPCONLY	Y10T74/20006		730
Y10T74/20012	9	Multiple controlled elements	CPCONLY	Y10T74/20012		1324
Y10T74/20018	10	Transmission control	CPCONLY	Y10T74/20018		857
Y10T74/20024	11	Fluid actuator	CPCONLY	Y10T74/20024		305
Y10T74/2003	11	Electrical actuator	CPCONLY	Y10T74/2003		507
Y10T74/20037	11	Occupant propelled vehicle	CPCONLY	Y10T74/20037		137
Y10T74/20043	12	Transmission controlled by flexible cable	CPCONLY	Y10T74/20043		103
Y10T74/20049	11	Transmission controlled by flexible cable	CPCONLY	Y10T74/20049		166
Y10T74/20055	11	Foot operated	CPCONLY	Y10T74/20055		186
Y10T74/20061	12	Multiple foot-operated controls	CPCONLY	Y10T74/20061		44
Y10T74/20067	11	Control convertible between automatic and manual operation	CPCONLY	Y10T74/20067		190
Y10T74/20073	11	Control of plural mechanisms [e.g., control of transmission and control of 4 - wheel drive]	CPCONLY	Y10T74/20073		120
Y10T74/20079	12	Separate control levers	CPCONLY	Y10T74/20079		31
Y10T74/20085	11	Restriction of shift, gear selection, or gear engagement	CPCONLY	Y10T74/20085		497
Y10T74/20091	12	Prevention of reverse shift	CPCONLY	Y10T74/20091		119
Y10T74/20098	12	Separate actuator to disengage restrictor	CPCONLY	Y10T74/20098		249
Y10T74/20104	12	Shift element interlock	CPCONLY	Y10T74/20104		334
Y10T74/2011	13	with detent, recess, notch, or groove	CPCONLY	Y10T74/2011		240
Y10T74/20116	13	Resiliently biased interlock	CPCONLY	Y10T74/20116		160
Y10T74/20122	12	Spherical restrictor	CPCONLY	Y10T74/20122		48
Y10T74/20128	12	Resiliently biased restrictor	CPCONLY	Y10T74/20128		128
Y10T74/20134	11	having vibration damper	CPCONLY	Y10T74/20134		85
Y10T74/2014	11	Manually operated selector [e.g., remotely controlled device, lever, push button, rotary dial, etc.]	CPCONLY	Y10T74/2014		664
Y10T74/20146	12	Control lever on steering column	CPCONLY	Y10T74/20146		175
Y10T74/20152	13	Control lever movable through plural planes	CPCONLY	Y10T74/20152		48
Y10T74/20159	12	Control lever movable through plural planes	CPCONLY	Y10T74/20159		352
Y10T74/20165	13	Spherical mount [e.g., ball and socket]	CPCONLY	Y10T74/20165		124
Y10T74/20171	14	Resiliently biased control lever	CPCONLY	Y10T74/20171		69
Y10T74/20177	11	Particular element [e.g., shift fork, template, etc.]	CPCONLY	Y10T74/20177		327
Y10T74/20183	12	Shift fork structure	CPCONLY	Y10T74/20183		121
Y10T74/20189	10	Foot operated	CPCONLY	Y10T74/20189		296
Y10T74/20195	11	Offset extension	CPCONLY	Y10T74/20195		63
Y10T74/20201	10	Control moves in two planes	CPCONLY	Y10T74/20201		999
Y10T74/20207	9	Multiple controlling elements for single controlled element	CPCONLY	Y10T74/20207		449
Y10T74/20213	10	Interconnected	CPCONLY	Y10T74/20213		442
Y10T74/2022	11	Hand and foot	CPCONLY	Y10T74/2022		416
Y10T74/20226	12	Accelerator	CPCONLY	Y10T74/20226		334
Y10T74/20232	11	Marine	CPCONLY	Y10T74/20232		285
Y10T74/20238	10	Interlocked	CPCONLY	Y10T74/20238		743
Y10T74/20244	11	Push button	CPCONLY	Y10T74/20244		240
Y10T74/2025	11	Rod blocks actuation of rotary member	CPCONLY	Y10T74/2025		81
Y10T74/20256	10	Steering and controls assemblies	CPCONLY	Y10T74/20256		526
Y10T74/20262	11	Rotary control shaft	CPCONLY	Y10T74/20262		239
Y10T74/20268	11	Reciprocating control elements	CPCONLY	Y10T74/20268		88
Y10T74/20274	12	Flexible	CPCONLY	Y10T74/20274		113
Y10T74/2028	12	Handle bar type	CPCONLY	Y10T74/2028		175
Y10T74/20287	13	Flexible control element	CPCONLY	Y10T74/20287		662
Y10T74/20293	11	with horn control	CPCONLY	Y10T74/20293		15
Y10T74/20299	10	Antirattling elements	CPCONLY	Y10T74/20299		108
Y10T74/20305	10	Robotic arm	CPCONLY	Y10T74/20305		623
Y10T74/20311	11	including power cable or connector	CPCONLY	Y10T74/20311		184
Y10T74/20317	11	including electric motor	CPCONLY	Y10T74/20317		377
Y10T74/20323	11	including flaccid drive element	CPCONLY	Y10T74/20323		222
Y10T74/20329	11	Joint between elements	CPCONLY	Y10T74/20329		486
Y10T74/20335	12	Wrist	CPCONLY	Y10T74/20335		257
Y10T74/20341	10	Power elements as controlling elements	CPCONLY	Y10T74/20341		123
Y10T74/20348	11	Planar surface with orthogonal movement and rotation	CPCONLY	Y10T74/20348		75
Y10T74/20354	11	Planar surface with orthogonal movement only	CPCONLY	Y10T74/20354		139
Y10T74/2036	11	Pair of power elements	CPCONLY	Y10T74/2036		60
Y10T74/20366	10	Power and manual controlling elements	CPCONLY	Y10T74/20366		50
Y10T74/20372	10	Manual controlling elements	CPCONLY	Y10T74/20372		77
Y10T74/20378	11	Planar surface with orthogonal movement or rotation	CPCONLY	Y10T74/20378		42
Y10T74/20384	11	Levers	CPCONLY	Y10T74/20384		106
Y10T74/2039	12	Pair of levers	CPCONLY	Y10T74/2039		143
Y10T74/20396	9	Hand operated	CPCONLY	Y10T74/20396		935
Y10T74/20402	10	Flexible transmitter [e.g., Bowden cable]	CPCONLY	Y10T74/20402		579
Y10T74/20408	11	Constant tension sustaining	CPCONLY	Y10T74/20408		649
Y10T74/20414	12	Hydraulic control	CPCONLY	Y10T74/20414		38
Y10T74/2042	11	and hand operator	CPCONLY	Y10T74/2042		769
Y10T74/20426	12	Slidable	CPCONLY	Y10T74/20426		583
Y10T74/20432	12	for moving a mirror	CPCONLY	Y10T74/20432		286
Y10T74/20438	12	Single rotatable lever [e.g., for bicycle brake or derailleur]	CPCONLY	Y10T74/20438		841
Y10T74/20444	11	including rolling antifriction elements	CPCONLY	Y10T74/20444		132
Y10T74/2045	11	and sheath support, connector, or anchor	CPCONLY	Y10T74/2045		826
Y10T74/20456	11	Specific cable or sheath structure	CPCONLY	Y10T74/20456		478
Y10T74/20462	11	Specific cable connector or guide	CPCONLY	Y10T74/20462		747
Y10T74/20468	10	Sliding rod	CPCONLY	Y10T74/20468		621
Y10T74/20474	10	Rotatable rod, shaft, or post	CPCONLY	Y10T74/20474		520
Y10T74/2048	11	Gear, drum, and cable	CPCONLY	Y10T74/2048		532
Y10T74/20486	11	Drum and cable	CPCONLY	Y10T74/20486		296
Y10T74/20492	11	Gear	CPCONLY	Y10T74/20492		235
Y10T74/20498	12	Variable ratio	CPCONLY	Y10T74/20498		52
Y10T74/20504	12	Screw and nut	CPCONLY	Y10T74/20504		131
Y10T74/2051	11	Adjustable	CPCONLY	Y10T74/2051		77
Y10T74/20516	11	Mountings	CPCONLY	Y10T74/20516		206
Y10T74/20522	12	Antenna	CPCONLY	Y10T74/20522		1
Y10T74/20528	9	Foot operated	CPCONLY	Y10T74/20528		1573
Y10T74/20534	10	Accelerator	CPCONLY	Y10T74/20534		927
Y10T74/2054	10	Signal	CPCONLY	Y10T74/2054		190
Y10T74/20546	9	Knee operated	CPCONLY	Y10T74/20546		111
Y10T74/20552	10	Elbow	CPCONLY	Y10T74/20552		8
Y10T74/20558	9	Variable output force	CPCONLY	Y10T74/20558		426
Y10T74/20564	10	Flexible	CPCONLY	Y10T74/20564		154
Y10T74/2057	10	Variable input leverage	CPCONLY	Y10T74/2057		282
Y10T74/20576	9	Elements	CPCONLY	Y10T74/20576		
Y10T74/20582	10	Levers	CPCONLY	Y10T74/20582		811
Y10T74/20588	11	toggle	CPCONLY	Y10T74/20588		516
Y10T74/20594	12	Lazy tongs	CPCONLY	Y10T74/20594		162
Y10T74/206	11	Adjustable	CPCONLY	Y10T74/206		737
Y10T74/20606	11	Swing posts	CPCONLY	Y10T74/20606		88
Y10T74/20612	11	Hand	CPCONLY	Y10T74/20612		693
Y10T74/20618	12	Jointed	CPCONLY	Y10T74/20618		156
Y10T74/20624	12	Adjustable	CPCONLY	Y10T74/20624		173
Y10T74/2063	11	Stops	CPCONLY	Y10T74/2063		1083
Y10T74/20636	10	Detents	CPCONLY	Y10T74/20636		1792
Y10T74/20642	11	Hand crank	CPCONLY	Y10T74/20642		394
Y10T74/20648	11	Interrelated lever release	CPCONLY	Y10T74/20648		338
Y10T74/20654	11	Gear	CPCONLY	Y10T74/20654		205
Y10T74/2066	11	Friction	CPCONLY	Y10T74/2066		1019
Y10T74/20666	11	Lever engaging	CPCONLY	Y10T74/20666		375
Y10T74/20672	11	Lever engaging rack	CPCONLY	Y10T74/20672		179
Y10T74/20678	12	Pivoted	CPCONLY	Y10T74/20678		102
Y10T74/20684	12	Lever carried pawl	CPCONLY	Y10T74/20684		319
Y10T74/2069	12	Handle release	CPCONLY	Y10T74/2069		237
Y10T74/20696	12	Finger lever release	CPCONLY	Y10T74/20696		233
Y10T74/20702	13	Slidable	CPCONLY	Y10T74/20702		310
Y10T74/20708	12	Pedal controlled	CPCONLY	Y10T74/20708		194
Y10T74/20714	11	Lever carried rack	CPCONLY	Y10T74/20714		175
Y10T74/2072	12	Pivoted	CPCONLY	Y10T74/2072		118
Y10T74/20726	12	Pedal controlled	CPCONLY	Y10T74/20726		113
Y10T74/20732	10	Handles	CPCONLY	Y10T74/20732		622
Y10T74/20738	11	Extension	CPCONLY	Y10T74/20738		246
Y10T74/20744	11	Hand crank	CPCONLY	Y10T74/20744		330
Y10T74/2075	12	Extensible	CPCONLY	Y10T74/2075		107
Y10T74/20756	12	Collapsible	CPCONLY	Y10T74/20756		269
Y10T74/20762	11	Shaft connections	CPCONLY	Y10T74/20762		470
Y10T74/20768	12	Engine starter type	CPCONLY	Y10T74/20768		51
Y10T74/20774	13	Holders	CPCONLY	Y10T74/20774		82
Y10T74/2078	11	Handle bars	CPCONLY	Y10T74/2078		561
Y10T74/20786	12	Spring biased or supported	CPCONLY	Y10T74/20786		167
Y10T74/20792	12	Folding or adjustable	CPCONLY	Y10T74/20792		313
Y10T74/20798	13	Sectional	CPCONLY	Y10T74/20798		133
Y10T74/20804	14	Simultaneously movable	CPCONLY	Y10T74/20804		65
Y10T74/2081	13	Continuous	CPCONLY	Y10T74/2081		50
Y10T74/20816	14	with handle latch	CPCONLY	Y10T74/20816		36
Y10T74/20822	12	Attachments and accessories	CPCONLY	Y10T74/20822		462
Y10T74/20828	12	Handholds and grips	CPCONLY	Y10T74/20828		527
Y10T74/20834	11	Hand wheels	CPCONLY	Y10T74/20834		1373
Y10T74/2084	12	Knob or dial	CPCONLY	Y10T74/2084		679
Y10T74/20846	12	Slidable	CPCONLY	Y10T74/20846		67
Y10T74/20852	12	Pivoted	CPCONLY	Y10T74/20852		115
Y10T74/20858	13	Releasable	CPCONLY	Y10T74/20858		100
Y10T74/20864	12	Handles	CPCONLY	Y10T74/20864		426
Y10T74/2087	12	Rim grips and covers	CPCONLY	Y10T74/2087		325
Y10T74/20876	11	Caps and covers	CPCONLY	Y10T74/20876		217
Y10T74/20882	10	Rocker arms	CPCONLY	Y10T74/20882		456
Y10T74/20888	10	Pedals	CPCONLY	Y10T74/20888		843
Y10T74/20894	11	Treadles	CPCONLY	Y10T74/20894		208
Y10T74/209	11	Extension	CPCONLY	Y10T74/209		162
Y10T74/20906	12	Offset	CPCONLY	Y10T74/20906		133
Y10T74/20912	11	Pads and covers	CPCONLY	Y10T74/20912		222
Y10T74/20918	10	Foot rests	CPCONLY	Y10T74/20918		290
Y10T74/20924	10	Controller checks	CPCONLY	Y10T74/20924		241
Y10T74/2093	10	Slot closers and lever guards	CPCONLY	Y10T74/2093		307
Y10T74/21	8	Elements	CPCONLY	Y10T74/21		
Y10T74/2101	9	Cams	CPCONLY	Y10T74/2101		1524
Y10T74/2102	10	Adjustable	CPCONLY	Y10T74/2102		1397
Y10T74/2104	11	Flexible strip	CPCONLY	Y10T74/2104		99
Y10T74/2105	11	Memory devices	CPCONLY	Y10T74/2105		47
Y10T74/2106	11	Timer devices	CPCONLY	Y10T74/2106		111
Y10T74/2107	10	Follower	CPCONLY	Y10T74/2107		1454
Y10T74/2109	9	Balancing for drum, e.g., washing machine or arm-type structure, etc., centrifuge, etc.	CPCONLY	Y10T74/2109		306
Y10T74/211	9	Eccentric	CPCONLY	Y10T74/211		230
Y10T74/2111	10	Plural, movable relative to each other [including ball[s]]	CPCONLY	Y10T74/2111		211
Y10T74/2112	11	Concentric	CPCONLY	Y10T74/2112		133
Y10T74/2114	10	Adjustable	CPCONLY	Y10T74/2114		242
Y10T74/2115	11	Radially	CPCONLY	Y10T74/2115		209
Y10T74/2116	10	having anti-friction means, e.g., roller bearing, lubrication, etc.	CPCONLY	Y10T74/2116		87
Y10T74/2117	9	Power generating-type flywheel	CPCONLY	Y10T74/2117		149
Y10T74/2119	10	Structural detail, e.g., material, configuration, superconductor, discs, laminated, etc.	CPCONLY	Y10T74/2119		126
Y10T74/212	11	Containing fiber or filament	CPCONLY	Y10T74/212		93
Y10T74/2121	9	Flywheel, motion smoothing-type	CPCONLY	Y10T74/2121		179
Y10T74/2122	10	with fluid balancing means	CPCONLY	Y10T74/2122		127
Y10T74/2123	11	and pressure compensation	CPCONLY	Y10T74/2123		58
Y10T74/2125	11	and elastic device	CPCONLY	Y10T74/2125		57
Y10T74/2126	11	and bearings	CPCONLY	Y10T74/2126		24
Y10T74/2127	10	with electrical or magnetic damping	CPCONLY	Y10T74/2127		50
Y10T74/2128	10	Damping using swinging masses, e.g., pendulum type, etc.	CPCONLY	Y10T74/2128		279
Y10T74/213	10	Damping by increasing frictional force	CPCONLY	Y10T74/213		129
Y10T74/2131	10	Damping by absorbing vibration force [via rubber, elastomeric material, etc.]	CPCONLY	Y10T74/2131		326
Y10T74/2132	10	Structural detail, e.g., fiber, held by magnet, etc.	CPCONLY	Y10T74/2132		177
Y10T74/2133	9	Pawls and ratchets	CPCONLY	Y10T74/2133		411
Y10T74/2135	10	Noiseless	CPCONLY	Y10T74/2135		225
Y10T74/2136	10	Pivoted pawls	CPCONLY	Y10T74/2136		505
Y10T74/2137	11	Single tooth	CPCONLY	Y10T74/2137		330
Y10T74/2138	11	Flexible single tooth	CPCONLY	Y10T74/2138		48
Y10T74/214	11	Multiple tooth	CPCONLY	Y10T74/214		226
Y10T74/2141	10	Sliding pawls	CPCONLY	Y10T74/2141		235
Y10T74/2142	9	Pitmans and connecting rods	CPCONLY	Y10T74/2142		1245
Y10T74/2143	10	Radial	CPCONLY	Y10T74/2143		345
Y10T74/2144	10	Yieldable	CPCONLY	Y10T74/2144		294
Y10T74/2146	11	Longitudinal springs	CPCONLY	Y10T74/2146		377
Y10T74/2147	11	Fluid cushion	CPCONLY	Y10T74/2147		156
Y10T74/2148	11	Automatic release	CPCONLY	Y10T74/2148		168
Y10T74/2149	12	toggle link type	CPCONLY	Y10T74/2149		87
Y10T74/2151	10	Longitudinally adjustable	CPCONLY	Y10T74/2151		686
Y10T74/2152	10	Hollow rod, lubricated	CPCONLY	Y10T74/2152		137
Y10T74/2153	10	Sheet metal type	CPCONLY	Y10T74/2153		135
Y10T74/2154	10	Counterbalanced	CPCONLY	Y10T74/2154		169
Y10T74/2156	11	Weight type	CPCONLY	Y10T74/2156		203
Y10T74/2157	12	Rotating	CPCONLY	Y10T74/2157		187
Y10T74/2158	11	Spring	CPCONLY	Y10T74/2158		178
Y10T74/2159	10	Section coupled	CPCONLY	Y10T74/2159		195
Y10T74/216	10	Bearings, adjustable	CPCONLY	Y10T74/216		139
Y10T74/2162	10	Engine type	CPCONLY	Y10T74/2162		488
Y10T74/2163	10	Idler arm	CPCONLY	Y10T74/2163		15
Y10T74/2164	9	Cranks and pedals	CPCONLY	Y10T74/2164		542
Y10T74/2165	10	with attached gear	CPCONLY	Y10T74/2165		366
Y10T74/2167	10	Variable	CPCONLY	Y10T74/2167		155
Y10T74/2168	10	Pedals	CPCONLY	Y10T74/2168		584
Y10T74/2169	11	Counterbalanced	CPCONLY	Y10T74/2169		54
Y10T74/217	11	with toe or shoe clips	CPCONLY	Y10T74/217		503
Y10T74/2172	11	Adjustable or folding	CPCONLY	Y10T74/2172		105
Y10T74/2173	9	Cranks and wrist pins	CPCONLY	Y10T74/2173		471
Y10T74/2174	10	Multiple throw	CPCONLY	Y10T74/2174		199
Y10T74/2175	11	Sectional	CPCONLY	Y10T74/2175		164
Y10T74/2177	10	Sectional	CPCONLY	Y10T74/2177		174
Y10T74/2178	10	Yieldable	CPCONLY	Y10T74/2178		79
Y10T74/2179	10	Adjustable	CPCONLY	Y10T74/2179		672
Y10T74/218	11	Automatically	CPCONLY	Y10T74/218		65
Y10T74/2181	10	Variable	CPCONLY	Y10T74/2181		128
Y10T74/2183	10	Counterbalanced	CPCONLY	Y10T74/2183		525
Y10T74/2184	11	Vibration dampers	CPCONLY	Y10T74/2184		424
Y10T74/2185	10	Lubricated	CPCONLY	Y10T74/2185		184
Y10T74/2186	9	Gear casings	CPCONLY	Y10T74/2186		2798
Y10T74/2188	10	Axle and torque tubes	CPCONLY	Y10T74/2188		693
Y10T74/2189	10	Cooling	CPCONLY	Y10T74/2189		224
Y10T74/219	9	Guards	CPCONLY	Y10T74/219		316
Y10T74/2191	10	for rotary member	CPCONLY	Y10T74/2191		345
Y10T74/2193	9	Guard mechanisms	CPCONLY	Y10T74/2193		228
Y10T74/2194	10	Automatic	CPCONLY	Y10T74/2194		104
Y10T74/2195	11	Oscillating member actuator	CPCONLY	Y10T74/2195		56
Y10T74/2196	11	Reciprocating member actuator	CPCONLY	Y10T74/2196		189
Y10T74/2198	10	Operator controlled	CPCONLY	Y10T74/2198		99
Y10T74/2199	10	Set screw	CPCONLY	Y10T74/2199		53
Y10T74/22	8	Miscellaneous	CPCONLY	Y10T74/22		804
Y10T82/00	7	Turning	CPCONLY	Y10T82/00		
Y10T82/10	8	Process of turning	CPCONLY	Y10T82/10		1201
Y10T82/11	8	Talking machine tablet	CPCONLY	Y10T82/11		86
Y10T82/12	8	Radially moving rotating tool inside bore	CPCONLY	Y10T82/12		353
Y10T82/122	9	Forming non-circular bore	CPCONLY	Y10T82/122		135
Y10T82/125	9	Tool simultaneously moving axially	CPCONLY	Y10T82/125		268
Y10T82/128	10	Pivoted to tool-carrier	CPCONLY	Y10T82/128		186
Y10T82/13	8	Pattern section	CPCONLY	Y10T82/13		214
Y10T82/135	9	Cam-controlled cutter	CPCONLY	Y10T82/135		480
Y10T82/14	8	Axial pattern	CPCONLY	Y10T82/14		164
Y10T82/141	9	having transverse tool and templet guide	CPCONLY	Y10T82/141		588
Y10T82/142	10	with workpiece gauge	CPCONLY	Y10T82/142		31
Y10T82/143	10	having electrical actuator	CPCONLY	Y10T82/143		102
Y10T82/145	11	And hydraulic actuator	CPCONLY	Y10T82/145		18
Y10T82/147	10	having hydraulic actuator	CPCONLY	Y10T82/147		152
Y10T82/148	9	Pivoted tool rest	CPCONLY	Y10T82/148		275
Y10T82/149	9	Profiled cutter	CPCONLY	Y10T82/149		110
Y10T82/15	8	Tapers	CPCONLY	Y10T82/15		
Y10T82/152	9	Offset work axis	CPCONLY	Y10T82/152		66
Y10T82/154	9	Transversely shifted cutter	CPCONLY	Y10T82/154		
Y10T82/156	10	Templet controlled	CPCONLY	Y10T82/156		209
Y10T82/158	10	Gear controlled	CPCONLY	Y10T82/158		33
Y10T82/16	8	Severing or cut-off	CPCONLY	Y10T82/16		148
Y10T82/16016	9	Processes	CPCONLY	Y10T82/16016		267
Y10T82/16032	9	Automatic and/or triggered control	CPCONLY	Y10T82/16032		123
Y10T82/16049	9	Combined with means to sharpen tool[s]	CPCONLY	Y10T82/16049		22
Y10T82/16065	9	Combined with means to apply fluid	CPCONLY	Y10T82/16065		60
Y10T82/16081	9	Combined with means to heat tool and/or work	CPCONLY	Y10T82/16081		21
Y10T82/16098	9	with dust or chip handling	CPCONLY	Y10T82/16098		49
Y10T82/16114	9	including scrap cutting means	CPCONLY	Y10T82/16114		27
Y10T82/16131	9	Flying cutter type	CPCONLY	Y10T82/16131		83
Y10T82/16147	9	Cutting couple straddling work	CPCONLY	Y10T82/16147		90
Y10T82/16163	10	with pattern, guide or cam means [noncircular product]	CPCONLY	Y10T82/16163		31
Y10T82/16181	10	Plural cutting means [pairs, or pair, plus single]	CPCONLY	Y10T82/16181		58
Y10T82/16196	10	Rotary shear pair	CPCONLY	Y10T82/16196		53
Y10T82/16213	11	Tool axes parallel to axis of work rotation	CPCONLY	Y10T82/16213		43
Y10T82/16229	9	Interrelated means for tool infeed and circumrotation	CPCONLY	Y10T82/16229		66
Y10T82/16245	10	Dependent upon reaction to work	CPCONLY	Y10T82/16245		10
Y10T82/16262	10	Infeed cam disk rotation geared to tool holder rotation	CPCONLY	Y10T82/16262		24
Y10T82/16278	11	Axial infeed cam	CPCONLY	Y10T82/16278		8
Y10T82/16295	11	including centrifugal balancing means	CPCONLY	Y10T82/16295		23
Y10T82/16311	11	Scroll plate infeed cam	CPCONLY	Y10T82/16311		13
Y10T82/16327	10	Infeed cam plate braked with respect to tool[s] carrier plate	CPCONLY	Y10T82/16327		5
Y10T82/16344	10	Orbital cogwheel and fixed detent	CPCONLY	Y10T82/16344		14
Y10T82/16361	10	Common gear means	CPCONLY	Y10T82/16361		11
Y10T82/16377	11	including adjustable means to vary gear speed	CPCONLY	Y10T82/16377		3
Y10T82/16393	11	with manual disconnect lever	CPCONLY	Y10T82/16393		5
Y10T82/16409	10	with means to feed work	CPCONLY	Y10T82/16409		15
Y10T82/16426	9	Infeed means	CPCONLY	Y10T82/16426		53
Y10T82/16442	10	with means to circumrotate tool[s] about work	CPCONLY	Y10T82/16442		119
Y10T82/16459	11	Fluid means for relative tool actuation	CPCONLY	Y10T82/16459		36
Y10T82/16475	11	Gear means for tool actuation	CPCONLY	Y10T82/16475		34
Y10T82/16491	12	including axial cam	CPCONLY	Y10T82/16491		15
Y10T82/16508	13	with indicator	CPCONLY	Y10T82/16508		2
Y10T82/16524	11	Bell crank linkage for tool[s] holder	CPCONLY	Y10T82/16524		14
Y10T82/16541	11	Resilient means for tool actuation	CPCONLY	Y10T82/16541		15
Y10T82/16557	12	with means for manual retraction	CPCONLY	Y10T82/16557		10
Y10T82/16573	10	Hand crank for tool holder	CPCONLY	Y10T82/16573		24
Y10T82/16591	10	Power driven eccentric	CPCONLY	Y10T82/16591		27
Y10T82/16606	11	Fluid motor	CPCONLY	Y10T82/16606		8
Y10T82/16622	11	Plural tools	CPCONLY	Y10T82/16622		14
Y10T82/16639	10	Tool within work	CPCONLY	Y10T82/16639		118
Y10T82/16655	10	with means to rotate tool[s]	CPCONLY	Y10T82/16655		73
Y10T82/16672	11	including rotatable cutters supporting work	CPCONLY	Y10T82/16672		25
Y10T82/16688	11	Planetating work mandrels	CPCONLY	Y10T82/16688		31
Y10T82/16704	11	Pivoted tool carriage	CPCONLY	Y10T82/16704		74
Y10T82/16721	12	with adjustable work stops	CPCONLY	Y10T82/16721		11
Y10T82/16737	11	Eccentric periphery rotary tool	CPCONLY	Y10T82/16737		9
Y10T82/16754	11	Means to feed work axially	CPCONLY	Y10T82/16754		37
Y10T82/16771	11	Translatable work support carriage	CPCONLY	Y10T82/16771		34
Y10T82/16786	11	with tool groove in support roll[s]	CPCONLY	Y10T82/16786		48
Y10T82/16803	10	Rotatable tool[s] driven by contact with work	CPCONLY	Y10T82/16803		71
Y10T82/16819	11	Axially movable tool support	CPCONLY	Y10T82/16819		32
Y10T82/16836	12	Freely floating parallel to axis	CPCONLY	Y10T82/16836		9
Y10T82/16852	13	with supplemental nonrotative tool	CPCONLY	Y10T82/16852		4
Y10T82/16868	12	including clutch control for work rotation	CPCONLY	Y10T82/16868		5
Y10T82/16885	11	including resilient means urging work against rotary support	CPCONLY	Y10T82/16885		8
Y10T82/16901	10	Separate means for plural tools	CPCONLY	Y10T82/16901		30
Y10T82/16918	10	Spring urged	CPCONLY	Y10T82/16918		23
Y10T82/16934	11	For window shade	CPCONLY	Y10T82/16934		4
Y10T82/16951	10	Tool adjustment and/or stop	CPCONLY	Y10T82/16951		139
Y10T82/16967	10	with means to support and/or rotate work	CPCONLY	Y10T82/16967		450
Y10T82/16983	10	with means to feed work	CPCONLY	Y10T82/16983		98
Y10T82/17	8	Lathe for pulley	CPCONLY	Y10T82/17		33
Y10T82/18	8	Lathe for wheel or axle	CPCONLY	Y10T82/18		198
Y10T82/185	9	In situ lathe for railroad wheel	CPCONLY	Y10T82/185		52
Y10T82/19	8	Lathe for crank or crank pin	CPCONLY	Y10T82/19		314
Y10T82/192	9	Portable lathe for crank pin	CPCONLY	Y10T82/192		93
Y10T82/195	9	having work oscillator	CPCONLY	Y10T82/195		13
Y10T82/198	10	having work driver	CPCONLY	Y10T82/198		73
Y10T82/20	8	Lathe for screw cutting	CPCONLY	Y10T82/20		332
Y10T82/205	9	having swinging feed nut and tool bar	CPCONLY	Y10T82/205		28
Y10T82/21	8	Portable lathe for brake drum, disc, or shoe	CPCONLY	Y10T82/21		156
Y10T82/22	8	Portable lathe for pipe turning	CPCONLY	Y10T82/22		390
Y10T82/23	8	Portable lathe for piston grooving	CPCONLY	Y10T82/23		72
Y10T82/24	8	Bench lathe	CPCONLY	Y10T82/24		73
Y10T82/245	9	Watchmaker&apos;s lathe	CPCONLY	Y10T82/245		87
Y10T82/25	8	Lathe	CPCONLY	Y10T82/25		695
Y10T82/2502	9	with program control	CPCONLY	Y10T82/2502		398
Y10T82/2504	10	And transmission	CPCONLY	Y10T82/2504		47
Y10T82/2506	10	And tool turret	CPCONLY	Y10T82/2506		102
Y10T82/2508	9	with tool turret	CPCONLY	Y10T82/2508		182
Y10T82/2511	9	Vertical	CPCONLY	Y10T82/2511		252
Y10T82/2512	9	having facing tool fed transverse to work	CPCONLY	Y10T82/2512		95
Y10T82/2514	9	with work feeder or remover	CPCONLY	Y10T82/2514		547
Y10T82/2516	10	Magazine type	CPCONLY	Y10T82/2516		378
Y10T82/2518	11	Bar feeder	CPCONLY	Y10T82/2518		156
Y10T82/2521	10	Bar feeder	CPCONLY	Y10T82/2521		299
Y10T82/2522	9	Portable	CPCONLY	Y10T82/2522		592
Y10T82/2524	9	Multiple	CPCONLY	Y10T82/2524		460
Y10T82/2527	9	having hollow cutter head	CPCONLY	Y10T82/2527		325
Y10T82/2529	9	Revolvable cutter heads	CPCONLY	Y10T82/2529		276
Y10T82/2531	9	Carriage feed	CPCONLY	Y10T82/2531		586
Y10T82/2533	10	Control	CPCONLY	Y10T82/2533		225
Y10T82/2535	11	Electrical type	CPCONLY	Y10T82/2535		145
Y10T82/2537	10	Apron mechanism	CPCONLY	Y10T82/2537		129
Y10T82/2539	11	Feednut control	CPCONLY	Y10T82/2539		140
Y10T82/2541	10	Slide rest	CPCONLY	Y10T82/2541		709
Y10T82/2543	11	Multiple tool support	CPCONLY	Y10T82/2543		338
Y10T82/2545	11	Tool relief	CPCONLY	Y10T82/2545		44
Y10T82/2547	10	Change gears	CPCONLY	Y10T82/2547		94
Y10T82/2549	10	Feedscrews and rods	CPCONLY	Y10T82/2549		152
Y10T82/2552	9	Headstock	CPCONLY	Y10T82/2552		600
Y10T82/2554	10	Speed changing gear	CPCONLY	Y10T82/2554		274
Y10T82/2556	11	Speed change gears for maintaining constant cutting speed	CPCONLY	Y10T82/2556		149
Y10T82/2558	10	Spindle reverser	CPCONLY	Y10T82/2558		16
Y10T82/2561	10	Spindle or work angler	CPCONLY	Y10T82/2561		68
Y10T82/2562	10	Spindle and bearings	CPCONLY	Y10T82/2562		244
Y10T82/2564	9	Tailstock	CPCONLY	Y10T82/2564		533
Y10T82/2566	9	Bed	CPCONLY	Y10T82/2566		373
Y10T82/2568	9	Center	CPCONLY	Y10T82/2568		389
Y10T82/2571	10	Alignment adjuster	CPCONLY	Y10T82/2571		77
Y10T82/2572	9	Attachment	CPCONLY	Y10T82/2572		620
Y10T82/2574	10	Stop [e.g., carriage, tool, work, etc.]	CPCONLY	Y10T82/2574		288
Y10T82/2577	11	Tool slide	CPCONLY	Y10T82/2577		56
Y10T82/2579	11	Collet or spindle	CPCONLY	Y10T82/2579		54
Y10T82/2581	11	Indexible [e.g., roll type, etc.]	CPCONLY	Y10T82/2581		49
Y10T82/2583	9	Tool and work rest	CPCONLY	Y10T82/2583		322
Y10T82/2585	9	Tool rest	CPCONLY	Y10T82/2585		894
Y10T82/2587	10	Turret type holder [e.g., multiple tools, etc.]	CPCONLY	Y10T82/2587		346
Y10T82/2589	10	Quick release tool or holder clamp	CPCONLY	Y10T82/2589		172
Y10T82/2591	10	Tool post	CPCONLY	Y10T82/2591		304
Y10T82/2593	9	Work rest	CPCONLY	Y10T82/2593		397
Y10T82/2595	10	with noise or vibration dampener	CPCONLY	Y10T82/2595		119
Y10T82/2597	10	Center rest	CPCONLY	Y10T82/2597		224
Y10T82/26	8	Work driver	CPCONLY	Y10T82/26		700
Y10T82/262	9	Lathe dog	CPCONLY	Y10T82/262		143
Y10T82/264	10	Cam grip	CPCONLY	Y10T82/264		46
Y10T82/266	9	Mandrel	CPCONLY	Y10T82/266		103
Y10T82/268	10	Expansible	CPCONLY	Y10T82/268		367
Y10T82/27	8	Centerer	CPCONLY	Y10T82/27		213
Y10T82/28	8	Drill press attachment for turning	CPCONLY	Y10T82/28		24
Y10T82/29	8	Attachment for cutting a valve	CPCONLY	Y10T82/29		129
Y10T82/30	8	Miscellaneous	CPCONLY	Y10T82/30		390
Y10T83/00	7	Cutting	CPCONLY	Y10T83/00		4
Y10T83/02	8	Other than completely through work thickness	CPCONLY	Y10T83/02		275
Y10T83/0207	9	or through work presented	CPCONLY	Y10T83/0207		216
Y10T83/0215	10	Including use of rotary scoring blade	CPCONLY	Y10T83/0215		113
Y10T83/0222	11	Plural independent rotary scoring blades	CPCONLY	Y10T83/0222		69
Y10T83/023	10	With infeeding of work	CPCONLY	Y10T83/023		88
Y10T83/0237	9	Pricking	CPCONLY	Y10T83/0237		53
Y10T83/0244	10	Including use of orbiting tool carrier	CPCONLY	Y10T83/0244		63
Y10T83/0252	10	With infeeding of tool	CPCONLY	Y10T83/0252		64
Y10T83/0259	9	Edge trimming [e.g., chamfering, etc.]	CPCONLY	Y10T83/0259		147
Y10T83/0267	9	Splitting	CPCONLY	Y10T83/0267		158
Y10T83/0274	10	By use of endless band or chain knife	CPCONLY	Y10T83/0274		63
Y10T83/0281	10	By use of rotary blade	CPCONLY	Y10T83/0281		85
Y10T83/0289	11	Plural independent rotary blades	CPCONLY	Y10T83/0289		59
Y10T83/0296	10	With infeeding of work	CPCONLY	Y10T83/0296		157
Y10T83/0304	9	Grooving	CPCONLY	Y10T83/0304		556
Y10T83/0311	10	By use of plural independent rotary blades	CPCONLY	Y10T83/0311		70
Y10T83/0319	11	Forming common groove	CPCONLY	Y10T83/0319		43
Y10T83/0326	11	Blades turning about perpendicular axes	CPCONLY	Y10T83/0326		74
Y10T83/0333	9	Scoring	CPCONLY	Y10T83/0333		327
Y10T83/0341	10	Processes	CPCONLY	Y10T83/0341		327
Y10T83/0348	10	Active means to control depth of score	CPCONLY	Y10T83/0348		176
Y10T83/0356	10	Serially	CPCONLY	Y10T83/0356		60
Y10T83/0363	10	Plural independent scoring blades	CPCONLY	Y10T83/0363		79
Y10T83/037	11	Rotary scoring blades	CPCONLY	Y10T83/037		85
Y10T83/0378	12	On opposite sides of work	CPCONLY	Y10T83/0378		73
Y10T83/0385	10	Rotary scoring blade	CPCONLY	Y10T83/0385		273
Y10T83/0393	11	With means to rotate blade	CPCONLY	Y10T83/0393		89
Y10T83/04	8	Processes	CPCONLY	Y10T83/04		2347
Y10T83/0405	9	With preparatory or simultaneous ancillary treatment of work	CPCONLY	Y10T83/0405		193
Y10T83/041	10	By heating or cooling	CPCONLY	Y10T83/041		181
Y10T83/0414	11	At localized area [e.g., line of separation]	CPCONLY	Y10T83/0414		235
Y10T83/0419	10	By distorting within elastic limit	CPCONLY	Y10T83/0419		89
Y10T83/0424	11	By stretching	CPCONLY	Y10T83/0424		134
Y10T83/0429	11	By compressing	CPCONLY	Y10T83/0429		134
Y10T83/0433	11	By flexing around or by tool	CPCONLY	Y10T83/0433		42
Y10T83/0438	12	To conform to shape of tool	CPCONLY	Y10T83/0438		36
Y10T83/0443	10	By fluid application	CPCONLY	Y10T83/0443		178
Y10T83/0448	9	With subsequent handling [i.e., of product]	CPCONLY	Y10T83/0448		544
Y10T83/0453	10	By fluid application	CPCONLY	Y10T83/0453		224
Y10T83/0457	10	By retaining or reinserting product in workpiece	CPCONLY	Y10T83/0457		51
Y10T83/0462	10	By accelerating travel	CPCONLY	Y10T83/0462		56
Y10T83/0467	10	By separating products from each other	CPCONLY	Y10T83/0467		279
Y10T83/0472	10	By moving work support to which a tacky product is adhered	CPCONLY	Y10T83/0472		26
Y10T83/0476	9	Including stacking of plural workpieces	CPCONLY	Y10T83/0476		235
Y10T83/0481	9	Puncturing	CPCONLY	Y10T83/0481		240
Y10T83/0486	9	With manipulation of tool protective strip [e.g., backing strip]	CPCONLY	Y10T83/0486		29
Y10T83/0491	9	Cutting of interdigitating products	CPCONLY	Y10T83/0491		96
Y10T83/0495	9	Making and using a registration cut	CPCONLY	Y10T83/0495		121
Y10T83/05	9	With reorientation of tool between cuts	CPCONLY	Y10T83/05		232
Y10T83/0505	9	With reorientation of work between cuts	CPCONLY	Y10T83/0505		166
Y10T83/051	10	Relative to same tool	CPCONLY	Y10T83/051		202
Y10T83/0515	9	During movement of work past flying cutter	CPCONLY	Y10T83/0515		312
Y10T83/0519	10	Cyclically varying rate of tool or work movement	CPCONLY	Y10T83/0519		70
Y10T83/0524	9	Plural cutting steps	CPCONLY	Y10T83/0524		466
Y10T83/0529	10	Blanking and cutting	CPCONLY	Y10T83/0529		100
Y10T83/0534	11	Cutting to join blanked holes	CPCONLY	Y10T83/0534		63
Y10T83/0538	10	Repetitive transverse severing from leading edge of work	CPCONLY	Y10T83/0538		211
Y10T83/0543	11	Alternately forming products of less than total width of work	CPCONLY	Y10T83/0543		31
Y10T83/0548	11	With longitudinal severing	CPCONLY	Y10T83/0548		49
Y10T83/0553	12	Effected by plural steps	CPCONLY	Y10T83/0553		27
Y10T83/0558	12	Along zigzag or undulant line or cut	CPCONLY	Y10T83/0558		38
Y10T83/0562	12	Prior to transverse severing	CPCONLY	Y10T83/0562		67
Y10T83/0567	11	Nonrectilinear cutting	CPCONLY	Y10T83/0567		38
Y10T83/0572	10	Plural cutting steps effect progressive cut	CPCONLY	Y10T83/0572		196
Y10T83/0577	10	Repetitive blanking	CPCONLY	Y10T83/0577		168
Y10T83/0581	9	Cutting part way through from opposite sides of work	CPCONLY	Y10T83/0581		168
Y10T83/0586	9	Effecting diverse or sequential cuts in same cutting step	CPCONLY	Y10T83/0586		134
Y10T83/0591	9	Cutting by direct application of fluent pressure to work	CPCONLY	Y10T83/0591		316
Y10T83/0596	9	Cutting wall of hollow work	CPCONLY	Y10T83/0596		587
Y10T83/06	9	Blanking	CPCONLY	Y10T83/06		221
Y10T83/0605	9	Cut advances across work surface	CPCONLY	Y10T83/0605		434
Y10T83/061	8	With manually actuated means to disturb cyclic operation	CPCONLY	Y10T83/061		75
Y10T83/081	8	With randomly actuated stopping means	CPCONLY	Y10T83/081		188
Y10T83/083	9	With means to permit subsequent hand operation	CPCONLY	Y10T83/083		15
Y10T83/084	9	With stop-signal-responsive means to actuate auxiliary cutter	CPCONLY	Y10T83/084		13
Y10T83/086	9	With sensing of product or product handling means	CPCONLY	Y10T83/086		102
Y10T83/088	9	Responsive to tool detector or work-feed-means detector	CPCONLY	Y10T83/088		159
Y10T83/089	10	Responsive to tool characteristic	CPCONLY	Y10T83/089		171
Y10T83/091	9	Responsive to work sensing means	CPCONLY	Y10T83/091		107
Y10T83/093	10	Of buckled work	CPCONLY	Y10T83/093		18
Y10T83/094	11	Running loop	CPCONLY	Y10T83/094		21
Y10T83/096	10	Detector supported on or urged against work	CPCONLY	Y10T83/096		56
Y10T83/098	11	Resiliently biased	CPCONLY	Y10T83/098		48
Y10T83/099	9	Manually operated	CPCONLY	Y10T83/099		155
Y10T83/101	8	With stopping means effective on completion of predetermined number of tool cycles	CPCONLY	Y10T83/101		152
Y10T83/121	8	With means to accomplish delayed stopping after cessation of cyclic operation	CPCONLY	Y10T83/121		34
Y10T83/141	8	With means to monitor and control operation [e.g., self-regulating means]	CPCONLY	Y10T83/141		404
Y10T83/145	9	Including means to monitor product	CPCONLY	Y10T83/145		175
Y10T83/148	9	Including means to correct the sensed operation	CPCONLY	Y10T83/148		367
Y10T83/152	10	And modify another operation	CPCONLY	Y10T83/152		67
Y10T83/155	10	Optimizing product from unique workpiece	CPCONLY	Y10T83/155		119
Y10T83/159	9	Including means to compensate tool speed for work-feed variations	CPCONLY	Y10T83/159		170
Y10T83/162	8	With control means responsive to replaceable or selectable information program	CPCONLY	Y10T83/162		187
Y10T83/164	9	For cutting component of animal; e.g., hair clipper	CPCONLY	Y10T83/164		6
Y10T83/166	9	Removable element carries program	CPCONLY	Y10T83/166		49
Y10T83/169	10	Indeterminate length, web or strand	CPCONLY	Y10T83/169		67
Y10T83/171	11	Magnetic	CPCONLY	Y10T83/171		36
Y10T83/173	9	Arithmetically determined program	CPCONLY	Y10T83/173		108
Y10T83/175	10	With condition sensor	CPCONLY	Y10T83/175		113
Y10T83/178	11	Responsive to work	CPCONLY	Y10T83/178		241
Y10T83/18	10	With operator input means	CPCONLY	Y10T83/18		105
Y10T83/182	8	With means to weigh product	CPCONLY	Y10T83/182		143
Y10T83/202	8	With product handling means	CPCONLY	Y10T83/202		189
Y10T83/2022	9	Initiated by means responsive to product or work	CPCONLY	Y10T83/2022		113
Y10T83/2024	10	Responsive to work	CPCONLY	Y10T83/2024		125
Y10T83/2027	9	Initiated by means directly responsive to tool movement	CPCONLY	Y10T83/2027		86
Y10T83/2029	10	In return motion of tool	CPCONLY	Y10T83/2029		82
Y10T83/2031	9	Including means to drape the product	CPCONLY	Y10T83/2031		41
Y10T83/2033	9	Including means to form or hold pile of product pieces	CPCONLY	Y10T83/2033		53
Y10T83/2035	10	In nested relation	CPCONLY	Y10T83/2035		17
Y10T83/2037	10	In stacked or packed relation	CPCONLY	Y10T83/2037		195
Y10T83/204	11	Stacker sweeps along product support	CPCONLY	Y10T83/204		39
Y10T83/2042	11	Including cut pieces overlapped on delivery means	CPCONLY	Y10T83/2042		146
Y10T83/2044	11	And means to separate product portions	CPCONLY	Y10T83/2044		107
Y10T83/2046	11	Including means to move stack bodily	CPCONLY	Y10T83/2046		116
Y10T83/2048	12	By movement of stack holder	CPCONLY	Y10T83/2048		160
Y10T83/205	13	By timed relocation of holder along path of stack gscheme-change-itemth	CPCONLY	Y10T83/205		106
Y10T83/2053	14	Interrelated adjustment of holder movement and work-feeder	CPCONLY	Y10T83/2053		2
Y10T83/2055	11	And means to resist stack movement	CPCONLY	Y10T83/2055		44
Y10T83/2057	11	Including means to deliver individual pieces to a stack holder	CPCONLY	Y10T83/2057		243
Y10T83/2059	12	With spindle to enter a hole or to make hole in product	CPCONLY	Y10T83/2059		63
Y10T83/2061	12	By face-engaging means to push product broadside into stacked relation	CPCONLY	Y10T83/2061		104
Y10T83/2063	11	Upon emergence from hollow cutter	CPCONLY	Y10T83/2063		75
Y10T83/2066	9	By fluid current	CPCONLY	Y10T83/2066		575
Y10T83/2068	10	Plural blasts directed against plural product pieces	CPCONLY	Y10T83/2068		123
Y10T83/207	10	By suction means	CPCONLY	Y10T83/207		813
Y10T83/2072	9	By brush means	CPCONLY	Y10T83/2072		80
Y10T83/2074	9	Including means to divert one portion of product from another	CPCONLY	Y10T83/2074		322
Y10T83/2077	10	By kerf entering guide	CPCONLY	Y10T83/2077		281
Y10T83/2079	10	Remaining or re-inserted product portion from base material	CPCONLY	Y10T83/2079		140
Y10T83/2081	10	Gravity type	CPCONLY	Y10T83/2081		178
Y10T83/2083	10	Deflecting guide	CPCONLY	Y10T83/2083		276
Y10T83/2085	11	Positionable gate in product flow path	CPCONLY	Y10T83/2085		194
Y10T83/2087	10	Diverging product movers	CPCONLY	Y10T83/2087		187
Y10T83/209	9	Including means to replace product in base material after cutting	CPCONLY	Y10T83/209		33
Y10T83/2092	9	Means to move, guide, or permit free fall or flight of product	CPCONLY	Y10T83/2092		268
Y10T83/2094	10	Means to move product at speed different from work speed	CPCONLY	Y10T83/2094		230
Y10T83/2096	10	Means to move product out of contact with tool	CPCONLY	Y10T83/2096		161
Y10T83/2098	11	With means to effect subsequent conveying or guiding	CPCONLY	Y10T83/2098		343
Y10T83/21	11	Out of contact with a rotary tool	CPCONLY	Y10T83/21		137
Y10T83/2103	12	Mover surrounds axis of tool rotation	CPCONLY	Y10T83/2103		56
Y10T83/2105	12	Mover mounted on rotary tool	CPCONLY	Y10T83/2105		38
Y10T83/2107	13	For radial movement of product	CPCONLY	Y10T83/2107		92
Y10T83/2109	14	Resiliently mounted	CPCONLY	Y10T83/2109		117
Y10T83/2111	12	Mover is resiliently mounted	CPCONLY	Y10T83/2111		45
Y10T83/2113	12	Pivoted mover	CPCONLY	Y10T83/2113		36
Y10T83/2116	13	And plural rotating tools	CPCONLY	Y10T83/2116		30
Y10T83/2118	12	Stationary mover	CPCONLY	Y10T83/2118		108
Y10T83/212	13	And plural rotating tools	CPCONLY	Y10T83/212		105
Y10T83/2122	11	By ejector within a hollow cutter	CPCONLY	Y10T83/2122		183
Y10T83/2124	12	And means to strip the outer surface of a cutter	CPCONLY	Y10T83/2124		122
Y10T83/2127	12	Ejector operated with return stroke of cutter	CPCONLY	Y10T83/2127		96
Y10T83/2129	12	By means carried by cooperating cutter	CPCONLY	Y10T83/2129		42
Y10T83/2131	12	By cam-operated ejector	CPCONLY	Y10T83/2131		51
Y10T83/2133	12	By resiliently biased ejector	CPCONLY	Y10T83/2133		187
Y10T83/2135	11	Moving stripper timed with tool stroke	CPCONLY	Y10T83/2135		98
Y10T83/2137	12	And alternatively movable to or from operating position	CPCONLY	Y10T83/2137		46
Y10T83/214	12	Latched stripper released by tool return	CPCONLY	Y10T83/214		22
Y10T83/2142	12	Plural strippers operative upon plural tools	CPCONLY	Y10T83/2142		55
Y10T83/2144	12	Single stripper operative upon plural tools	CPCONLY	Y10T83/2144		157
Y10T83/2146	12	Spring arm stripper	CPCONLY	Y10T83/2146		53
Y10T83/2148	12	Linkage actuated	CPCONLY	Y10T83/2148		82
Y10T83/215	12	Carried by moving tool element or its support	CPCONLY	Y10T83/215		115
Y10T83/2153	13	Fluid pressure actuated stripper	CPCONLY	Y10T83/2153		81
Y10T83/2155	13	Stripper biased against product	CPCONLY	Y10T83/2155		77
Y10T83/2157	14	Elastomeric stripper contacting product	CPCONLY	Y10T83/2157		125
Y10T83/2159	14	By spring means	CPCONLY	Y10T83/2159		371
Y10T83/2161	14	By free weight of stripper	CPCONLY	Y10T83/2161		26
Y10T83/2163	12	Stripper biased against product	CPCONLY	Y10T83/2163		50
Y10T83/2166	13	Spring biased stripper	CPCONLY	Y10T83/2166		198
Y10T83/2168	11	Manually operated stripper	CPCONLY	Y10T83/2168		50
Y10T83/217	11	Stationary stripper	CPCONLY	Y10T83/217		236
Y10T83/2172	12	Stripper encircles moving tool	CPCONLY	Y10T83/2172		181
Y10T83/2174	10	Blockable exit port	CPCONLY	Y10T83/2174		89
Y10T83/2177	10	Tool conforming member interposed between tool and work	CPCONLY	Y10T83/2177		5
Y10T83/2179	10	Including means to move, or resist movement of, cut pieces along delivery chute	CPCONLY	Y10T83/2179		78
Y10T83/2181	10	Active delivery means mounted on tool support	CPCONLY	Y10T83/2181		124
Y10T83/2183	10	Product mover including gripper means	CPCONLY	Y10T83/2183		154
Y10T83/2185	11	Suction gripper	CPCONLY	Y10T83/2185		302
Y10T83/2187	11	Reciprocating product handler	CPCONLY	Y10T83/2187		117
Y10T83/219	11	Rotating or oscillating product handler	CPCONLY	Y10T83/219		221
Y10T83/2192	10	Endless conveyor	CPCONLY	Y10T83/2192		754
Y10T83/2194	11	And means to remove product therefrom	CPCONLY	Y10T83/2194		135
Y10T83/2196	10	Roller[s]	CPCONLY	Y10T83/2196		329
Y10T83/2198	10	Tiltable or withdrawable support	CPCONLY	Y10T83/2198		435
Y10T83/22	10	Means to move product laterally	CPCONLY	Y10T83/22		157
Y10T83/2203	11	Oscillating means	CPCONLY	Y10T83/2203		90
Y10T83/2205	11	Reciprocating means	CPCONLY	Y10T83/2205		190
Y10T83/2207	10	Means to move product in a nonrectilinear path	CPCONLY	Y10T83/2207		213
Y10T83/2209	10	Guide	CPCONLY	Y10T83/2209		193
Y10T83/2211	11	Abutment in path of product being moved by work feeder	CPCONLY	Y10T83/2211		61
Y10T83/2213	11	Product-diverting conduit in or from hollow tool	CPCONLY	Y10T83/2213		137
Y10T83/2216	11	Inclined conduit, chute or plane	CPCONLY	Y10T83/2216		588
Y10T83/2218	11	Abutment interposed in path of free fall or flight of product	CPCONLY	Y10T83/2218		92
Y10T83/222	8	With receptacle or support for cut product	CPCONLY	Y10T83/222		989
Y10T83/242	8	With means to clean work or tool	CPCONLY	Y10T83/242		531
Y10T83/263	8	With means to apply transient nonpropellant fluent material to tool or work	CPCONLY	Y10T83/263		764
Y10T83/283	8	With means to control or modify temperature of apparatus or work	CPCONLY	Y10T83/283		455
Y10T83/293	9	Of tool	CPCONLY	Y10T83/293		712
Y10T83/303	8	With tool sharpener or smoother	CPCONLY	Y10T83/303		357
Y10T83/313	9	Spatially fixed tool	CPCONLY	Y10T83/313		80
Y10T83/323	8	With means to stretch work temporarily	CPCONLY	Y10T83/323		344
Y10T83/343	8	With means to deform work temporarily	CPCONLY	Y10T83/343		484
Y10T83/364	8	By fluid blast and/or suction	CPCONLY	Y10T83/364		444
Y10T83/384	8	By tool inside hollow work	CPCONLY	Y10T83/384		97
Y10T83/385	9	Work pre-packed with internal tool[s]	CPCONLY	Y10T83/385		15
Y10T83/386	9	With expanding mandrel	CPCONLY	Y10T83/386		58
Y10T83/387	9	Interrelated tool feed means and means to actuate work immobilizer	CPCONLY	Y10T83/387		44
Y10T83/388	10	Actuated clamp element and work holder coact to position work	CPCONLY	Y10T83/388		37
Y10T83/39	9	Synchronized tool and work feeding means	CPCONLY	Y10T83/39		41
Y10T83/391	9	With means to position tool[s] for cutting	CPCONLY	Y10T83/391		77
Y10T83/392	9	One tool [either internal or external] having compound motion	CPCONLY	Y10T83/392		60
Y10T83/393	10	Annulus and disc-type tool pair	CPCONLY	Y10T83/393		37
Y10T83/394	9	One tool having unidirectional rotary motion	CPCONLY	Y10T83/394		64
Y10T83/395	9	One tool having only rectilinear motion[s]	CPCONLY	Y10T83/395		92
Y10T83/396	10	Annulus and disc-type tool pair	CPCONLY	Y10T83/396		21
Y10T83/397	11	A tool has a sequence of motion in plural paths	CPCONLY	Y10T83/397		22
Y10T83/398	10	Internal tool is an active cutter	CPCONLY	Y10T83/398		95
Y10T83/40	10	Multiple external active tools	CPCONLY	Y10T83/40		31
Y10T83/401	11	Tools operate in a substantially common transverse plane of cut	CPCONLY	Y10T83/401		43
Y10T83/402	12	With tool actuating cams on a common support	CPCONLY	Y10T83/402		25
Y10T83/403	9	With manually actuated means to position or facilitate positioning of work	CPCONLY	Y10T83/403		35
Y10T83/404	8	By means to misalign aligned apertured tools	CPCONLY	Y10T83/404		48
Y10T83/408	9	Combined with another type tool of the class	CPCONLY	Y10T83/408		42
Y10T83/412	9	Rectilinear relative movement only	CPCONLY	Y10T83/412		141
Y10T83/416	9	Rotary relative movement solely about a single pivot	CPCONLY	Y10T83/416		100
Y10T83/42	10	With plural apertures in one or both carriers	CPCONLY	Y10T83/42		67
Y10T83/424	8	By increased tensioning of work-enclosing wire	CPCONLY	Y10T83/424		43
Y10T83/444	8	Tool engages work during dwell of intermittent workfeed	CPCONLY	Y10T83/444		109
Y10T83/4443	9	Unicyclic	CPCONLY	Y10T83/4443		138
Y10T83/4445	10	Convertible to and from unicyclic	CPCONLY	Y10T83/4445		24
Y10T83/4448	10	Controlled by mechanical means	CPCONLY	Y10T83/4448		130
Y10T83/445	9	With work-moving clamp jaw	CPCONLY	Y10T83/445		136
Y10T83/4453	9	Work moved solely by movable abutment	CPCONLY	Y10T83/4453		58
Y10T83/4455	9	Operation initiated by work-driven detector means to measure work length	CPCONLY	Y10T83/4455		138
Y10T83/4458	9	Work-sensing means to control work-moving or work-stopping means	CPCONLY	Y10T83/4458		177
Y10T83/446	10	With means to initiate tool feed by same control impulse	CPCONLY	Y10T83/446		241
Y10T83/4463	9	Work-sensing means to initiate tool feed	CPCONLY	Y10T83/4463		72
Y10T83/4465	10	With work-stopping abutment in sensing means	CPCONLY	Y10T83/4465		74
Y10T83/4468	9	Plural tools at same station, one positioned for continuous engagement with work	CPCONLY	Y10T83/4468		26
Y10T83/447	9	Plural tools successively actuated at same station	CPCONLY	Y10T83/447		89
Y10T83/4473	10	During one dwell period	CPCONLY	Y10T83/4473		113
Y10T83/4475	9	Tool has motion additional to cutting stroke during tool cycle	CPCONLY	Y10T83/4475		87
Y10T83/4478	10	Tool has additional motion during work dwell	CPCONLY	Y10T83/4478		65
Y10T83/448	11	Included in plural cutting cycles	CPCONLY	Y10T83/448		33
Y10T83/4483	10	Tool has work-feeding motion	CPCONLY	Y10T83/4483		90
Y10T83/4486	9	With variable direction of work-feed from cycle to cycle	CPCONLY	Y10T83/4486		46
Y10T83/4488	10	In one of certain selected directions	CPCONLY	Y10T83/4488		55
Y10T83/4491	9	Interlock between tool actuating and work feed means	CPCONLY	Y10T83/4491		112
Y10T83/4493	9	Tool motion initiates work feed and vice versa	CPCONLY	Y10T83/4493		86
Y10T83/4496	9	Stored energy means for moving work or tool, loaded by tool or work	CPCONLY	Y10T83/4496		34
Y10T83/4498	10	Work feed means actuates energy storage device for tool	CPCONLY	Y10T83/4498		90
Y10T83/4501	9	Work feed means controlled by means mounted on tool or tool support	CPCONLY	Y10T83/4501		71
Y10T83/4503	10	Such means drives the work feed means	CPCONLY	Y10T83/4503		113
Y10T83/4506	11	Work feed means carried by tool or tool support	CPCONLY	Y10T83/4506		46
Y10T83/4508	11	With supplemental work feed means	CPCONLY	Y10T83/4508		78
Y10T83/4511	11	On return stroke of tool	CPCONLY	Y10T83/4511		113
Y10T83/4513	10	Work feed means halted by means on tool or tool support	CPCONLY	Y10T83/4513		44
Y10T83/4516	9	Work-feed mechanism in nonfeed motion effects or initiates tool actuation	CPCONLY	Y10T83/4516		80
Y10T83/4518	10	By striking tool actuator	CPCONLY	Y10T83/4518		41
Y10T83/4521	11	Nonfeed motion is reverse to feed motion	CPCONLY	Y10T83/4521		66
Y10T83/4523	9	With means to vary number of work-feed increments between tool strokes	CPCONLY	Y10T83/4523		50
Y10T83/4526	9	Dwell caused by imposing reverse motion on portion of flexible moving work	CPCONLY	Y10T83/4526		43
Y10T83/4529	9	With uninterrupted flow of work from supply source	CPCONLY	Y10T83/4529		138
Y10T83/4531	9	Work feed increment shorter than longitudinal tool field	CPCONLY	Y10T83/4531		81
Y10T83/4534	9	Unequal work feed increments in recurring series	CPCONLY	Y10T83/4534		52
Y10T83/4536	10	Work carriage carries ratchet means to determine increments	CPCONLY	Y10T83/4536		34
Y10T83/4539	9	Means to change tool position, or length or datum position of work- or tool-feed increment	CPCONLY	Y10T83/4539		53
Y10T83/4541	10	With means to vary magnitude of work-feed increment	CPCONLY	Y10T83/4541		255
Y10T83/4544	11	Multi-increment type [e.g., ticket issuing]	CPCONLY	Y10T83/4544		61
Y10T83/4546	12	Length selector initiates machine operation	CPCONLY	Y10T83/4546		60
Y10T83/4549	11	By change in length of one member of feed-driving linkage	CPCONLY	Y10T83/4549		135
Y10T83/4551	12	Rotating member	CPCONLY	Y10T83/4551		102
Y10T83/4554	11	By change of effective shape of driving or driven surface of element of work-feed mechanism	CPCONLY	Y10T83/4554		36
Y10T83/4556	11	By adjustment of fixed stop	CPCONLY	Y10T83/4556		134
Y10T83/4559	10	With means to vary magnitude or base position of tool stroke	CPCONLY	Y10T83/4559		42
Y10T83/4561	9	With means to facilitate manual repositioning [shift] of work	CPCONLY	Y10T83/4561		53
Y10T83/4564	9	With means to produce plurality of work-feed increments per tool cycle	CPCONLY	Y10T83/4564		53
Y10T83/4567	10	Including supplemental work-feed means	CPCONLY	Y10T83/4567		111
Y10T83/4569	11	Manual	CPCONLY	Y10T83/4569		41
Y10T83/4572	11	With stop adapted to engage abutment surface on work	CPCONLY	Y10T83/4572		39
Y10T83/4574	12	Plurality of work stops successively effective	CPCONLY	Y10T83/4574		8
Y10T83/4577	9	Work fed successively to plural tools	CPCONLY	Y10T83/4577		238
Y10T83/4579	10	With change of direction between tools	CPCONLY	Y10T83/4579		90
Y10T83/4582	9	Work advance occurs during return stroke of tool	CPCONLY	Y10T83/4582		181
Y10T83/4584	9	Dwell defined only by "dead-center" of rotating crank	CPCONLY	Y10T83/4584		18
Y10T83/4587	9	Dwell initiated by disengagement of surface of moving frictional feed means from work	CPCONLY	Y10T83/4587		33
Y10T83/4589	10	Feed means has interrupted frictional surface	CPCONLY	Y10T83/4589		40
Y10T83/4592	10	Feed means has rotary motion	CPCONLY	Y10T83/4592		122
Y10T83/4594	9	Dwell caused by clamping or blocking work during continuous operation of feed means	CPCONLY	Y10T83/4594		173
Y10T83/4597	9	With means to control magnitude of work-feed increment or work acceleration	CPCONLY	Y10T83/4597		73
Y10T83/4599	10	Means to prevent random or excessive work feeds	CPCONLY	Y10T83/4599		87
Y10T83/4602	10	Full stroke required of feed means	CPCONLY	Y10T83/4602		21
Y10T83/4604	9	Work feed functions as tool support	CPCONLY	Y10T83/4604		48
Y10T83/4607	9	With rotary work-carrier	CPCONLY	Y10T83/4607		187
Y10T83/461	9	With abutment to position work being fed with respect to cutter	CPCONLY	Y10T83/461		269
Y10T83/4612	10	With slip between positioned work and feed means	CPCONLY	Y10T83/4612		76
Y10T83/4615	9	Work guide and feed means have open side	CPCONLY	Y10T83/4615		24
Y10T83/4617	9	Work feed means modified to maintain clearance from tool	CPCONLY	Y10T83/4617		40
Y10T83/462	9	Plurality of work feed means in separate paths	CPCONLY	Y10T83/462		93
Y10T83/4622	9	Intermittent drive type of gearing for work-feed means	CPCONLY	Y10T83/4622		54
Y10T83/4625	10	Gearing modified to lock the work-feed means	CPCONLY	Y10T83/4625		47
Y10T83/4627	10	Mutilated gear in mesh with gear driving work-feed means	CPCONLY	Y10T83/4627		48
Y10T83/463	9	Work-feed element contacts and moves with work	CPCONLY	Y10T83/463		203
Y10T83/4632	10	Comprises a work-moving gripper	CPCONLY	Y10T83/4632		495
Y10T83/4635	10	Comprises element entering aperture in, or engaging abutment surface on, work	CPCONLY	Y10T83/4635		341
Y10T83/4637	9	With means to guide, position, or present work to work-feed means	CPCONLY	Y10T83/4637		48
Y10T83/464	10	Means to transport work to work-feed means	CPCONLY	Y10T83/464		92
Y10T83/4642	11	Including means to pick articles from pack or stack	CPCONLY	Y10T83/4642		81
Y10T83/4645	9	With means to clamp work during dwell	CPCONLY	Y10T83/4645		429
Y10T83/4647	9	One-revolution clutch in tool drive	CPCONLY	Y10T83/4647		52
Y10T83/465	8	Cutting motion of tool has component in direction of moving work	CPCONLY	Y10T83/465		120
Y10T83/4653	9	With means to initiate intermittent tool action	CPCONLY	Y10T83/4653		78
Y10T83/4656	10	Tool moved in response to work-sensing means	CPCONLY	Y10T83/4656		60
Y10T83/4659	11	With means to vary "length" of product	CPCONLY	Y10T83/4659		63
Y10T83/4662	12	To vary an end-product "length" [e.g., "crop cut"]	CPCONLY	Y10T83/4662		45
Y10T83/4664	11	With photo-electric work-sensing means	CPCONLY	Y10T83/4664		77
Y10T83/4667	11	With trip-switch work-sensing means	CPCONLY	Y10T83/4667		29
Y10T83/467	12	To initiate feed movement of tool	CPCONLY	Y10T83/467		18
Y10T83/4673	13	And to initiate flying movement of tool	CPCONLY	Y10T83/4673		52
Y10T83/4676	11	With work-responsive means to initiate flying movement of tool	CPCONLY	Y10T83/4676		75
Y10T83/4679	12	With flying work-gripper means related to tool carrier	CPCONLY	Y10T83/4679		51
Y10T83/4682	12	With means controlling flying speed dependent on work speed	CPCONLY	Y10T83/4682		68
Y10T83/4685	10	With means to vary frequency of initiation	CPCONLY	Y10T83/4685		29
Y10T83/4688	11	By orbitally traveling trigger pin[s]	CPCONLY	Y10T83/4688		27
Y10T83/4691	9	Interrelated control of tool and work-feed drives	CPCONLY	Y10T83/4691		142
Y10T83/4693	9	With means to concurrently adjust flying frequency and retain flying speed of tool	CPCONLY	Y10T83/4693		77
Y10T83/4696	9	Plural diverse flying cutters	CPCONLY	Y10T83/4696		180
Y10T83/4699	9	Combined with other type cutter	CPCONLY	Y10T83/4699		51
Y10T83/4702	10	With slitter	CPCONLY	Y10T83/4702		205
Y10T83/4705	9	Plural separately mounted flying cutters	CPCONLY	Y10T83/4705		226
Y10T83/4708	9	With means to render cutter pass[es] ineffective	CPCONLY	Y10T83/4708		69
Y10T83/4711	10	With means to produce "mis-cut"	CPCONLY	Y10T83/4711		139
Y10T83/4714	9	Oscillating work shifter adjacent cutter	CPCONLY	Y10T83/4714		68
Y10T83/4717	10	Work actuated senser initiates shifter	CPCONLY	Y10T83/4717		11
Y10T83/472	9	Wire tool	CPCONLY	Y10T83/472		57
Y10T83/4722	10	On tool support having reciprocation parallel to direction of work-feed	CPCONLY	Y10T83/4722		39
Y10T83/4725	11	And rotation about axis parallel to direction of work-feed	CPCONLY	Y10T83/4725		20
Y10T83/4728	9	Tool flies by engagement with the work	CPCONLY	Y10T83/4728		154
Y10T83/4731	10	Tool merely flexes with moving work	CPCONLY	Y10T83/4731		15
Y10T83/4734	9	Flying support or guide for work	CPCONLY	Y10T83/4734		197
Y10T83/4737	9	With tool speed regulator	CPCONLY	Y10T83/4737		242
Y10T83/474	9	With work feed speed regulator	CPCONLY	Y10T83/474		107
Y10T83/4743	10	With means to vary cyclically speed of work	CPCONLY	Y10T83/4743		54
Y10T83/4746	9	Spring return of tool in counterfly direction	CPCONLY	Y10T83/4746		80
Y10T83/4749	9	Tool mounted on oscillating standard	CPCONLY	Y10T83/4749		102
Y10T83/4751	10	Both tools of couple on single standard	CPCONLY	Y10T83/4751		83
Y10T83/4754	11	One tool swings out of work path on return stroke	CPCONLY	Y10T83/4754		37
Y10T83/4757	9	Tool carrier shuttles rectilinearly parallel to direction of work feed	CPCONLY	Y10T83/4757		323
Y10T83/476	10	Including means to secure work to carrier	CPCONLY	Y10T83/476		161
Y10T83/4763	10	Both members of cutting pair on same carrier	CPCONLY	Y10T83/4763		230
Y10T83/4766	9	Orbital motion of cutting blade	CPCONLY	Y10T83/4766		56
Y10T83/4769	10	Work feeder mounted on tool support	CPCONLY	Y10T83/4769		96
Y10T83/4772	11	Gripper-type feeder	CPCONLY	Y10T83/4772		69
Y10T83/4775	10	Tool speed varied within each orbital cycle	CPCONLY	Y10T83/4775		152
Y10T83/4778	10	Work feed gripper carried on endless belt	CPCONLY	Y10T83/4778		31
Y10T83/478	10	Endless belt or chain tool carrier	CPCONLY	Y10T83/478		129
Y10T83/4783	10	Constantly oriented tool with arcuate cutting path	CPCONLY	Y10T83/4783		93
Y10T83/4786	11	Cutting couple type	CPCONLY	Y10T83/4786		121
Y10T83/4789	10	Rotatable disc-type tool on orbiting axis	CPCONLY	Y10T83/4789		131
Y10T83/4792	11	Idling disc	CPCONLY	Y10T83/4792		12
Y10T83/4795	10	Rotary tool	CPCONLY	Y10T83/4795		173
Y10T83/4798	11	Segmented disc slitting or slotting tool	CPCONLY	Y10T83/4798		135
Y10T83/4801	11	With undulant cutting edge [e.g., "pinking" tool]	CPCONLY	Y10T83/4801		118
Y10T83/4804	11	Single tool action drive	CPCONLY	Y10T83/4804		55
Y10T83/4807	12	With one-revolution drive	CPCONLY	Y10T83/4807		48
Y10T83/4809	11	With loop former preceding tool	CPCONLY	Y10T83/4809		39
Y10T83/4812	11	Compound movement of tool during tool cycle	CPCONLY	Y10T83/4812		394
Y10T83/4815	12	Axial reciprocation of tool	CPCONLY	Y10T83/4815		84
Y10T83/4818	11	Interconnected work feeder and tool driver	CPCONLY	Y10T83/4818		124
Y10T83/4821	11	Side cutting helical blade	CPCONLY	Y10T83/4821		46
Y10T83/4824	11	With means to cause progressive transverse cutting	CPCONLY	Y10T83/4824		144
Y10T83/4827	12	With helical cutter blade	CPCONLY	Y10T83/4827		186
Y10T83/483	11	With cooperating rotary cutter or backup	CPCONLY	Y10T83/483		295
Y10T83/4833	12	Cooperating tool axes adjustable relative to each other	CPCONLY	Y10T83/4833		214
Y10T83/4836	12	With radial overlap of the cutting members	CPCONLY	Y10T83/4836		533
Y10T83/4838	12	With anvil backup	CPCONLY	Y10T83/4838		586
Y10T83/4841	13	With resilient anvil surface	CPCONLY	Y10T83/4841		244
Y10T83/4844	12	Resiliently urged cutter or anvil member	CPCONLY	Y10T83/4844		199
Y10T83/4847	11	With cooperating stationary tool	CPCONLY	Y10T83/4847		311
Y10T83/485	8	Cutter with timed stroke relative to moving work	CPCONLY	Y10T83/485		81
Y10T83/487	9	Work swings about progressively cutting tool during tool stroke	CPCONLY	Y10T83/487		12
Y10T83/489	9	Tool actuated by movable work support	CPCONLY	Y10T83/489		36
Y10T83/49	9	Traveling cutter	CPCONLY	Y10T83/49		59
Y10T83/492	9	With means to vary timing of tool feed	CPCONLY	Y10T83/492		108
Y10T83/494	9	Uniform periodic tool actuation	CPCONLY	Y10T83/494		379
Y10T83/496	10	With periodic lateral feed of tool or work	CPCONLY	Y10T83/496		53
Y10T83/498	10	With plural tool stations	CPCONLY	Y10T83/498		23
Y10T83/50	10	Reciprocating tool	CPCONLY	Y10T83/50		86
Y10T83/501	10	With plural tools on a single tool support	CPCONLY	Y10T83/501		211
Y10T83/503	9	With plural tool stations	CPCONLY	Y10T83/503		29
Y10T83/505	8	Operation controlled by means responsive to product	CPCONLY	Y10T83/505		92
Y10T83/515	9	Actuation of tool controlled	CPCONLY	Y10T83/515		46
Y10T83/525	8	Operation controlled by detector means responsive to work	CPCONLY	Y10T83/525		136
Y10T83/527	9	With means to control work-responsive signal system	CPCONLY	Y10T83/527		55
Y10T83/528	10	To delay response to work-senser	CPCONLY	Y10T83/528		55
Y10T83/53	10	To change length of product	CPCONLY	Y10T83/53		83
Y10T83/531	9	With plural work-sensing means	CPCONLY	Y10T83/531		306
Y10T83/533	9	With photo-electric work-sensing means	CPCONLY	Y10T83/533		414
Y10T83/535	9	Release of interlock controlled	CPCONLY	Y10T83/535		40
Y10T83/536	9	Movement of work controlled	CPCONLY	Y10T83/536		444
Y10T83/538	9	Positioning of tool controlled	CPCONLY	Y10T83/538		350
Y10T83/54	9	Actuation of tool controlled by work-driven means to measure work length	CPCONLY	Y10T83/54		165
Y10T83/541	9	Actuation of tool controlled in response to work-sensing means	CPCONLY	Y10T83/541		360
Y10T83/543	10	Sensing means responsive to work indicium or irregularity	CPCONLY	Y10T83/543		462
Y10T83/544	10	With trip-switch in work-sensing mechanism	CPCONLY	Y10T83/544		177
Y10T83/546	8	Interrelated tool actuating and work guide moving means	CPCONLY	Y10T83/546		160
Y10T83/566	8	Interrelated tool actuating means and means to actuate work immobilizer	CPCONLY	Y10T83/566		129
Y10T83/5669	9	Work clamp	CPCONLY	Y10T83/5669		181
Y10T83/5678	10	Tool deflected by guide on tightened clamp	CPCONLY	Y10T83/5678		19
Y10T83/5687	11	With means to control clamping force	CPCONLY	Y10T83/5687		10
Y10T83/5696	10	Clamp driven by reaction from tool force	CPCONLY	Y10T83/5696		72
Y10T83/5705	10	With means providing for plural steps in clamping stroke	CPCONLY	Y10T83/5705		25
Y10T83/5715	10	With sequencing means	CPCONLY	Y10T83/5715		96
Y10T83/5724	10	With provision for manual control of clamp	CPCONLY	Y10T83/5724		41
Y10T83/5733	10	Tool or tool support on movable clamp jaw	CPCONLY	Y10T83/5733		93
Y10T83/5742	10	Clamp moved by direct impact of tool or tool support	CPCONLY	Y10T83/5742		44
Y10T83/5751	11	Clamp retracted by impact of tool or tool support	CPCONLY	Y10T83/5751		59
Y10T83/576	10	Clamp actuating means driven by tool or tool support	CPCONLY	Y10T83/576		65
Y10T83/5769	11	Clamp yieldably driven by tool or tool support	CPCONLY	Y10T83/5769		40
Y10T83/5778	12	With resilient drive element	CPCONLY	Y10T83/5778		169
Y10T83/5787	10	Clamp driven by yieldable means	CPCONLY	Y10T83/5787		54
Y10T83/5796	11	Drive means is resilient	CPCONLY	Y10T83/5796		140
Y10T83/5805	11	Fluid pressure yieldable drive means	CPCONLY	Y10T83/5805		109
Y10T83/5815	9	Work-stop abutment	CPCONLY	Y10T83/5815		211
Y10T83/5824	10	Oppositely effective abutments	CPCONLY	Y10T83/5824		12
Y10T83/5833	10	With cyclic means to alter work-stopping position	CPCONLY	Y10T83/5833		33
Y10T83/5842	10	Stop partakes of tool motion	CPCONLY	Y10T83/5842		34
Y10T83/5851	11	Carried by tool or tool support	CPCONLY	Y10T83/5851		170
Y10T83/586	8	Interrelated tool actuating means and means to actuate work-mover stop	CPCONLY	Y10T83/586		65
Y10T83/606	8	Interrelated tool actuating means and guard means	CPCONLY	Y10T83/606		199
Y10T83/613	9	Work guard	CPCONLY	Y10T83/613		35
Y10T83/619	9	Cutter guide slot closer	CPCONLY	Y10T83/619		13
Y10T83/626	8	Operation of member controlled by means responsive to position of element remote from member [e.g., interlock]	CPCONLY	Y10T83/626		211
Y10T83/637	9	With means to initiate operation of member	CPCONLY	Y10T83/637		189
Y10T83/647	8	With means to convey work relative to tool station	CPCONLY	Y10T83/647		322
Y10T83/6472	9	By fluid current	CPCONLY	Y10T83/6472		262
Y10T83/6473	9	Centrifugal feed to tangential tool [e.g., "Beria" type]	CPCONLY	Y10T83/6473		136
Y10T83/6475	9	With means to regulate work-feed speed	CPCONLY	Y10T83/6475		168
Y10T83/6476	9	Including means to move work from one tool station to another	CPCONLY	Y10T83/6476		245
Y10T83/6478	10	Tool stations angularly related	CPCONLY	Y10T83/6478		228
Y10T83/648	11	Work manipulated between tool stations	CPCONLY	Y10T83/648		184
Y10T83/6481	11	With static tool	CPCONLY	Y10T83/6481		135
Y10T83/6483	10	Tool stations staggered relative to one another	CPCONLY	Y10T83/6483		105
Y10T83/6484	10	Punch or die station	CPCONLY	Y10T83/6484		141
Y10T83/6486	10	Notcher or pinker station	CPCONLY	Y10T83/6486		40
Y10T83/6488	10	Work reciprocated past double-edged knife	CPCONLY	Y10T83/6488		29
Y10T83/6489	10	Slitter station	CPCONLY	Y10T83/6489		243
Y10T83/6491	11	And transverse cutter station	CPCONLY	Y10T83/6491		455
Y10T83/6492	9	Plural passes of diminishing work piece through tool station	CPCONLY	Y10T83/6492		162
Y10T83/6494	10	Work alternately, angularly re-oriented relative to tool station	CPCONLY	Y10T83/6494		141
Y10T83/6496	11	By additional means to engage work and orient it relative to tool station	CPCONLY	Y10T83/6496		127
Y10T83/6497	11	By roller or roll-like element	CPCONLY	Y10T83/6497		55
Y10T83/6499	10	Work rectilinearly reciprocated through tool station	CPCONLY	Y10T83/6499		170
Y10T83/65	11	With means to cause or permit angular re-orientation of work about axis parallel to plane of cut	CPCONLY	Y10T83/65		143
Y10T83/6502	12	By endless member having work-engaging teeth	CPCONLY	Y10T83/6502		35
Y10T83/6504	12	By member having work-engaging tooth	CPCONLY	Y10T83/6504		61
Y10T83/6505	13	Including plural work-engaging teeth	CPCONLY	Y10T83/6505		44
Y10T83/6507	14	Fluid operated	CPCONLY	Y10T83/6507		62
Y10T83/6508	11	With means to cause movement of work transversely toward plane of cut	CPCONLY	Y10T83/6508		149
Y10T83/651	12	By means to cause movement toward and away from plane of cut	CPCONLY	Y10T83/651		40
Y10T83/6512	13	Actuated by movement of a member on reciprocating means	CPCONLY	Y10T83/6512		63
Y10T83/6513	13	Actuated by passive means which is external to reciprocating means	CPCONLY	Y10T83/6513		49
Y10T83/6515	12	By means to define increment of movement toward plane of cut	CPCONLY	Y10T83/6515		173
Y10T83/6516	13	Interrelated with movement of reciprocating means	CPCONLY	Y10T83/6516		144
Y10T83/6518	13	By pusher mechanism	CPCONLY	Y10T83/6518		149
Y10T83/652	14	With additional work holding or positioning means	CPCONLY	Y10T83/652		81
Y10T83/6521	15	Work holding means includes actuator	CPCONLY	Y10T83/6521		128
Y10T83/6523	14	Including plural, simultaneously acting pusher elements	CPCONLY	Y10T83/6523		55
Y10T83/6524	15	Independently adjustable	CPCONLY	Y10T83/6524		72
Y10T83/6526	15	With additional means to retract elements	CPCONLY	Y10T83/6526		50
Y10T83/6528	15	Power derived from movement of reciprocating means	CPCONLY	Y10T83/6528		18
Y10T83/6529	15	Power derived from fluid pressure means	CPCONLY	Y10T83/6529		62
Y10T83/6531	15	Movement by screw means	CPCONLY	Y10T83/6531		62
Y10T83/6532	15	Movement by rack and pinion or pawl	CPCONLY	Y10T83/6532		91
Y10T83/6534	14	With handle	CPCONLY	Y10T83/6534		84
Y10T83/6536	13	By carriage	CPCONLY	Y10T83/6536		165
Y10T83/6537	11	By cable or belt drive	CPCONLY	Y10T83/6537		76
Y10T83/6539	9	With means for transverse positioning of work on a moving conveyor	CPCONLY	Y10T83/6539		139
Y10T83/654	9	With work-constraining means on work conveyor [i.e., "work-carrier"]	CPCONLY	Y10T83/654		708
Y10T83/6542	10	Plural means to constrain plural work pieces	CPCONLY	Y10T83/6542		270
Y10T83/6544	11	End of work protrudes through aperture in carrier	CPCONLY	Y10T83/6544		116
Y10T83/6545	10	With means to guide work-carrier in nonrectilinear path	CPCONLY	Y10T83/6545		161
Y10T83/6547	11	About axis fixed relative to tool station	CPCONLY	Y10T83/6547		24
Y10T83/6548	12	Infeed	CPCONLY	Y10T83/6548		76
Y10T83/655	13	About vertical axis	CPCONLY	Y10T83/655		100
Y10T83/6552	14	Cut normal to axis	CPCONLY	Y10T83/6552		53
Y10T83/6553	15	Work-guide tube	CPCONLY	Y10T83/6553		44
Y10T83/6555	13	Cut normal to axis	CPCONLY	Y10T83/6555		56
Y10T83/6556	14	Oscillating work-carrier	CPCONLY	Y10T83/6556		44
Y10T83/6558	14	Multiple cutters	CPCONLY	Y10T83/6558		51
Y10T83/656	15	Coaxial rotary cutters	CPCONLY	Y10T83/656		75
Y10T83/6561	12	Work stationary during cut	CPCONLY	Y10T83/6561		84
Y10T83/6563	10	With means to orient or position work carrier relative to tool station	CPCONLY	Y10T83/6563		267
Y10T83/6564	11	By pattern or templet	CPCONLY	Y10T83/6564		138
Y10T83/6566	11	By indexing means	CPCONLY	Y10T83/6566		174
Y10T83/6568	10	With additional work-locating means on work-carrier	CPCONLY	Y10T83/6568		166
Y10T83/6569	9	With means to stop work conveyor	CPCONLY	Y10T83/6569		290
Y10T83/6571	9	With means to store work articles	CPCONLY	Y10T83/6571		383
Y10T83/6572	9	With additional mans to engage work and orient it relative to tool station	CPCONLY	Y10T83/6572		478
Y10T83/6574	10	By work-stopping abutment	CPCONLY	Y10T83/6574		192
Y10T83/6576	10	By opposed lateral guide means	CPCONLY	Y10T83/6576		270
Y10T83/6577	10	With means to adjust additional means	CPCONLY	Y10T83/6577		332
Y10T83/6579	9	With means to press work to work-carrier	CPCONLY	Y10T83/6579		841
Y10T83/658	9	With projections on work-carrier [e.g., pin wheel]	CPCONLY	Y10T83/658		368
Y10T83/6582	9	Tool between tandem arranged work carrying means	CPCONLY	Y10T83/6582		171
Y10T83/6584	9	Cut made parallel to direction of and during work movement	CPCONLY	Y10T83/6584		408
Y10T83/6585	10	Including nonconcurrently acting tool	CPCONLY	Y10T83/6585		137
Y10T83/6587	10	Including plural, laterally spaced tools	CPCONLY	Y10T83/6587		310
Y10T83/6588	11	Tools mounted on common tool support	CPCONLY	Y10T83/6588		553
Y10T83/659	12	Tools axially shiftable on support	CPCONLY	Y10T83/659		280
Y10T83/6592	10	Interrelated work-conveying and tool-moving means	CPCONLY	Y10T83/6592		199
Y10T83/6593	11	With reciprocating tool [e.g., "jigsaw" type]	CPCONLY	Y10T83/6593		141
Y10T83/6595	11	With means to move tool laterally of feed direction during cutting	CPCONLY	Y10T83/6595		171
Y10T83/6596	11	With means to effect difference between work speed and tool speed	CPCONLY	Y10T83/6596		53
Y10T83/6598	11	Tool co-axial with work-conveying means	CPCONLY	Y10T83/6598		173
Y10T83/66	10	With means to press work to tool	CPCONLY	Y10T83/66		423
Y10T83/6601	10	Bevel cutting tool	CPCONLY	Y10T83/6601		136
Y10T83/6603	10	Tool shiftable relative to work-conveying means	CPCONLY	Y10T83/6603		369
Y10T83/6604	10	Tool in contact with surface of work-conveying means	CPCONLY	Y10T83/6604		71
Y10T83/6606	10	Tool between laterally spaced work-conveying means	CPCONLY	Y10T83/6606		246
Y10T83/6608	10	By rectilinearly moving work carriage	CPCONLY	Y10T83/6608		184
Y10T83/6609	11	Angularly adjustable	CPCONLY	Y10T83/6609		58
Y10T83/6611	12	Having positive adjustment stop; e.g., link	CPCONLY	Y10T83/6611		25
Y10T83/6612	12	Having position indicating means	CPCONLY	Y10T83/6612		74
Y10T83/6614	11	Pusher engaging rear surface of work	CPCONLY	Y10T83/6614		99
Y10T83/6616	12	Having means to actuate pusher	CPCONLY	Y10T83/6616		37
Y10T83/6617	13	Hydraulic or pneumatic means	CPCONLY	Y10T83/6617		32
Y10T83/6619	13	Gear or pulley actuated pusher	CPCONLY	Y10T83/6619		70
Y10T83/662	13	Lever, cam, or link actuated pusher	CPCONLY	Y10T83/662		62
Y10T83/6622	11	Having means to actuate carriage	CPCONLY	Y10T83/6622		18
Y10T83/6624	12	Hydraulic or pneumatic means	CPCONLY	Y10T83/6624		26
Y10T83/6625	12	Gear or pulley	CPCONLY	Y10T83/6625		55
Y10T83/6627	13	Adapted to place tension on flacid member	CPCONLY	Y10T83/6627		62
Y10T83/6628	12	Lever, cam, or link means	CPCONLY	Y10T83/6628		26
Y10T83/663	11	On or attached to vehicle	CPCONLY	Y10T83/663		22
Y10T83/6632	11	Supported for movement at one side of tool only	CPCONLY	Y10T83/6632		99
Y10T83/6633	10	By work moving flexible chain or conveyor	CPCONLY	Y10T83/6633		553
Y10T83/6635	10	By feed roller	CPCONLY	Y10T83/6635		169
Y10T83/6636	11	Pinch rollers	CPCONLY	Y10T83/6636		184
Y10T83/6638	10	Unattached manual work pusher	CPCONLY	Y10T83/6638		37
Y10T83/664	9	Roller	CPCONLY	Y10T83/664		204
Y10T83/6641	10	Plural independent rollers for feed of plural distinct work	CPCONLY	Y10T83/6641		13
Y10T83/6643	10	Shaped to conform to work	CPCONLY	Y10T83/6643		40
Y10T83/6644	10	With work-supplying reel	CPCONLY	Y10T83/6644		78
Y10T83/6646	11	And provision for selecting feed length	CPCONLY	Y10T83/6646		13
Y10T83/6648	10	Continuous conveying during, cutting; e.g., straw cutting	CPCONLY	Y10T83/6648		154
Y10T83/6649	10	Supporting work at cutting station	CPCONLY	Y10T83/6649		41
Y10T83/6651	11	Comprising part of cutting station	CPCONLY	Y10T83/6651		23
Y10T83/6652	10	Tool and feed roller actuated by common handle	CPCONLY	Y10T83/6652		7
Y10T83/6654	10	Tool and roller on common movable support	CPCONLY	Y10T83/6654		9
Y10T83/6656	9	Rectilinear movement only	CPCONLY	Y10T83/6656		107
Y10T83/6657	10	Tool opposing pusher	CPCONLY	Y10T83/6657		88
Y10T83/6659	11	Hydraulically or pneumatically actuated	CPCONLY	Y10T83/6659		28
Y10T83/666	11	Screw actuated	CPCONLY	Y10T83/666		77
Y10T83/6662	11	Gear or pulley actuated	CPCONLY	Y10T83/6662		53
Y10T83/6664	11	Lever, cam, or link actuated	CPCONLY	Y10T83/6664		48
Y10T83/6665	11	Spring or gravity urged	CPCONLY	Y10T83/6665		71
Y10T83/6667	9	Work carrier rotates about axis fixed relative to tool station	CPCONLY	Y10T83/6667		442
Y10T83/6668	9	Interrelated work-feeding means and tool-moving means	CPCONLY	Y10T83/6668		174
Y10T83/667	8	Tool carrier or guide affixed to work during cutting	CPCONLY	Y10T83/667		243
Y10T83/674	9	By flexible work-engaging member	CPCONLY	Y10T83/674		28
Y10T83/68	9	Entirely work supported	CPCONLY	Y10T83/68		550
Y10T83/687	8	By tool reciprocable along elongated edge	CPCONLY	Y10T83/687		76
Y10T83/6875	9	With means permitting tool to be rotatably adjusted about its cutting edge during cutting	CPCONLY	Y10T83/6875		81
Y10T83/688	9	With dynamic balancing or shock absorbing means	CPCONLY	Y10T83/688		94
Y10T83/6885	9	With tool of another type	CPCONLY	Y10T83/6885		46
Y10T83/689	9	With means to change to other type tool	CPCONLY	Y10T83/689		29
Y10T83/6895	9	Plural reciprocable tools	CPCONLY	Y10T83/6895		252
Y10T83/69	9	Stored energy furnishes drive in one direction	CPCONLY	Y10T83/69		181
Y10T83/6905	9	With tool in-feed	CPCONLY	Y10T83/6905		15
Y10T83/691	10	And auxiliary means for promoting or retarding tool in-feed	CPCONLY	Y10T83/691		86
Y10T83/6915	11	By yieldable means	CPCONLY	Y10T83/6915		98
Y10T83/692	11	And means to vary tool in-feed speed	CPCONLY	Y10T83/692		72
Y10T83/6925	11	With interrelated tool actuating and in-feed means	CPCONLY	Y10T83/6925		63
Y10T83/693	10	Of rectilinearly reciprocating tool	CPCONLY	Y10T83/693		157
Y10T83/6935	11	With in-feed by pivoting carrier	CPCONLY	Y10T83/6935		189
Y10T83/694	10	And means to prevent tool in-feed	CPCONLY	Y10T83/694		138
Y10T83/6945	10	With passive means to guide tool directly	CPCONLY	Y10T83/6945		117
Y10T83/695	11	By plural opposed guide surfaces	CPCONLY	Y10T83/695		262
Y10T83/6955	12	Having relative adjustment between guide surfaces	CPCONLY	Y10T83/6955		76
Y10T83/696	12	With relative adjustment between guide and work or work-support	CPCONLY	Y10T83/696		32
Y10T83/6965	13	By or with additional movable work-support portion	CPCONLY	Y10T83/6965		81
Y10T83/697	13	By rotation about an axis parallel to the work-support surface	CPCONLY	Y10T83/697		175
Y10T83/6975	13	By rotation about an axis perpendicular to the work-support surface	CPCONLY	Y10T83/6975		300
Y10T83/698	10	Including means to cause nonrectilinear tool infeed	CPCONLY	Y10T83/698		32
Y10T83/6985	10	Of arcuately oscillating tool	CPCONLY	Y10T83/6985		48
Y10T83/699	10	Of tool carrier on single moving pivot	CPCONLY	Y10T83/699		11
Y10T83/6995	11	Pivot moves in closed loop	CPCONLY	Y10T83/6995		22
Y10T83/70	11	Pivot moves to and fro in arcuate path	CPCONLY	Y10T83/70		192
Y10T83/7005	12	Axis of arcuate path moves during cutting	CPCONLY	Y10T83/7005		7
Y10T83/701	11	Pivot moves to and fro in rectilinear path	CPCONLY	Y10T83/701		69
Y10T83/7015	9	Having uniplanar compound motion	CPCONLY	Y10T83/7015		55
Y10T83/702	10	By plural arcuately oscillating carrier	CPCONLY	Y10T83/702		65
Y10T83/7025	10	Constantly oriented tool travelling in orbit	CPCONLY	Y10T83/7025		25
Y10T83/703	10	Tool rocks cutting reciprocations	CPCONLY	Y10T83/703		57
Y10T83/7035	11	One tool reciprocates along fixed guide element	CPCONLY	Y10T83/7035		53
Y10T83/704	9	With work-support and means to vary relationship between tool and work support	CPCONLY	Y10T83/704		91
Y10T83/7045	9	Arcuately oscillating tool carried on single pivot	CPCONLY	Y10T83/7045		43
Y10T83/705	9	With means to support tool at opposite ends	CPCONLY	Y10T83/705		101
Y10T83/7055	10	And apply drive force to both ends of tool	CPCONLY	Y10T83/7055		81
Y10T83/706	11	By flexible drive means	CPCONLY	Y10T83/706		76
Y10T83/7065	11	By reciprocating rigid support	CPCONLY	Y10T83/7065		96
Y10T83/707	8	By endless band or chain knife	CPCONLY	Y10T83/707		287
Y10T83/7076	9	With programming means	CPCONLY	Y10T83/7076		68
Y10T83/7083	9	With cutter other than endlessly orbiting type	CPCONLY	Y10T83/7083		67
Y10T83/7089	9	Including contiguous oppositely moving knife portions	CPCONLY	Y10T83/7089		27
Y10T83/7095	9	With means to change to non-endlessly orbiting cutter	CPCONLY	Y10T83/7095		14
Y10T83/7101	9	With tool in-feed	CPCONLY	Y10T83/7101		112
Y10T83/7108	10	Including ground-traversing vehicle	CPCONLY	Y10T83/7108		61
Y10T83/7114	10	Including means to permit arcuate in-feed motion	CPCONLY	Y10T83/7114		126
Y10T83/712	11	Including means to relocate path of in-feed motion	CPCONLY	Y10T83/712		27
Y10T83/7126	12	Angular relative previous path	CPCONLY	Y10T83/7126		47
Y10T83/7133	10	By gravity	CPCONLY	Y10T83/7133		32
Y10T83/7139	11	With fluid in-feed regulating means	CPCONLY	Y10T83/7139		44
Y10T83/7145	10	By motor-driven mechanism	CPCONLY	Y10T83/7145		129
Y10T83/7151	9	With scale or indicator	CPCONLY	Y10T83/7151		61
Y10T83/7158	9	Including plural cutting zones	CPCONLY	Y10T83/7158		40
Y10T83/7164	10	With adjustment of separation between zones	CPCONLY	Y10T83/7164		29
Y10T83/717	11	By lever means	CPCONLY	Y10T83/717		19
Y10T83/7176	11	By screw-threaded means	CPCONLY	Y10T83/7176		43
Y10T83/7183	10	Including "figure-8" band	CPCONLY	Y10T83/7183		39
Y10T83/7189	10	Comprising plural bands	CPCONLY	Y10T83/7189		118
Y10T83/7195	9	Including means to adjust relationship between band and work-support surface	CPCONLY	Y10T83/7195		62
Y10T83/7201	10	By varying angle between band and work-support surface	CPCONLY	Y10T83/7201		73
Y10T83/7208	11	By tilting band carrier	CPCONLY	Y10T83/7208		67
Y10T83/7214	12	About point of intersection of cutting span and work-support surface	CPCONLY	Y10T83/7214		27
Y10T83/722	10	By varying distance between band and work-support surface	CPCONLY	Y10T83/722		82
Y10T83/7226	9	With means to guard the tension	CPCONLY	Y10T83/7226		149
Y10T83/7233	10	Including means to retard undriven pulley or sprocket	CPCONLY	Y10T83/7233		11
Y10T83/7239	10	With means to vary distance between pulley or sprocket axes	CPCONLY	Y10T83/7239		163
Y10T83/7245	11	And angular relationship of axes	CPCONLY	Y10T83/7245		86
Y10T83/7251	11	Including means to yieldably bias pulley	CPCONLY	Y10T83/7251		168
Y10T83/7258	12	By fluid means	CPCONLY	Y10T83/7258		40
Y10T83/7264	9	With special blade guide means	CPCONLY	Y10T83/7264		476
Y10T83/727	8	With means to guide moving work	CPCONLY	Y10T83/727		578
Y10T83/728	9	In pivotal or arcuate movement	CPCONLY	Y10T83/728		117
Y10T83/73	9	Guide fixed to or integral with stationary tool element	CPCONLY	Y10T83/73		140
Y10T83/731	10	Tool element cooperates with a second tool	CPCONLY	Y10T83/731		48
Y10T83/732	9	With guard	CPCONLY	Y10T83/732		148
Y10T83/734	9	With attachment or operative connection to tool carrier	CPCONLY	Y10T83/734		75
Y10T83/735	9	With attachment or operative connection to passive tool guide	CPCONLY	Y10T83/735		116
Y10T83/736	9	Guide cooperates with template or straight edge secured to work	CPCONLY	Y10T83/736		43
Y10T83/738	9	Curved or deflecting guide	CPCONLY	Y10T83/738		126
Y10T83/739	9	Positively confines or otherwise determines path of work	CPCONLY	Y10T83/739		414
Y10T83/74	9	Adapted to permit maneuvering of work at tool zone	CPCONLY	Y10T83/74		95
Y10T83/741	9	With movable or yieldable guide element	CPCONLY	Y10T83/741		350
Y10T83/743	10	Opposed to work-supporting surface	CPCONLY	Y10T83/743		171
Y10T83/744	9	Plural guide elements	CPCONLY	Y10T83/744		114
Y10T83/745	10	Opposed	CPCONLY	Y10T83/745		282
Y10T83/747	9	Opposed to work-supporting surface	CPCONLY	Y10T83/747		108
Y10T83/748	8	With work immobilizer	CPCONLY	Y10T83/748		433
Y10T83/7487	9	Means to clamp work	CPCONLY	Y10T83/7487		414
Y10T83/7493	10	Combined with, peculiarly related to, other element	CPCONLY	Y10T83/7493		230
Y10T83/75	11	With or to tool guide	CPCONLY	Y10T83/75		355
Y10T83/7507	11	Guide for traveling cutter	CPCONLY	Y10T83/7507		372
Y10T83/7513	11	Tool or tool support on movable clamp jaw	CPCONLY	Y10T83/7513		143
Y10T83/752	10	With means providing for plural steps in clamping stroke	CPCONLY	Y10T83/752		23
Y10T83/7527	10	With equalizer or self-aligning jaw	CPCONLY	Y10T83/7527		66
Y10T83/7533	10	With biasing or counterbalancing means	CPCONLY	Y10T83/7533		175
Y10T83/754	10	Clamp driven by yieldable means	CPCONLY	Y10T83/754		112
Y10T83/7547	10	Liquid pressure actuating means	CPCONLY	Y10T83/7547		168
Y10T83/7553	10	Including means to retain clamp jaw in position	CPCONLY	Y10T83/7553		135
Y10T83/756	10	Self-locking drive means	CPCONLY	Y10T83/756		94
Y10T83/7567	10	Manually actuated drive means	CPCONLY	Y10T83/7567		206
Y10T83/7573	10	Including clamping face of specific structure	CPCONLY	Y10T83/7573		305
Y10T83/758	10	With means to adjust clamp position or stroke	CPCONLY	Y10T83/758		257
Y10T83/7587	9	Gapped work-constrainer	CPCONLY	Y10T83/7587		206
Y10T83/7593	9	Work-stop abutment	CPCONLY	Y10T83/7593		198
Y10T83/76	10	With scale or indicator	CPCONLY	Y10T83/76		510
Y10T83/7607	10	Normal to plane of cut	CPCONLY	Y10T83/7607		142
Y10T83/7613	11	Adjustable	CPCONLY	Y10T83/7613		222
Y10T83/762	12	Angularly relative to plane of cut; e.g., miter	CPCONLY	Y10T83/762		180
Y10T83/7627	11	With traversing cutter guide; e.g., cut-off saw	CPCONLY	Y10T83/7627		54
Y10T83/7633	10	Collapsible	CPCONLY	Y10T83/7633		79
Y10T83/764	10	Retractable	CPCONLY	Y10T83/764		180
Y10T83/7647	10	Adjustable	CPCONLY	Y10T83/7647		391
Y10T83/7653	11	Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches	CPCONLY	Y10T83/7653		90
Y10T83/766	12	Spaced edges	CPCONLY	Y10T83/766		84
Y10T83/7667	10	Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches	CPCONLY	Y10T83/7667		49
Y10T83/7673	11	Spaced edges	CPCONLY	Y10T83/7673		53
Y10T83/768	8	Rotatable disc tool pair or tool and carrier	CPCONLY	Y10T83/768		170
Y10T83/7684	9	With means to support work relative to tool[s]	CPCONLY	Y10T83/7684		249
Y10T83/7688	10	Plural tool elements successively actuated at same station	CPCONLY	Y10T83/7688		87
Y10T83/7693	10	Tool moved relative to work-support during cutting	CPCONLY	Y10T83/7693		665
Y10T83/7697	11	Tool angularly adjustable relative to work-support	CPCONLY	Y10T83/7697		805
Y10T83/7701	10	Supporting surface and tool axis angularly related	CPCONLY	Y10T83/7701		69
Y10T83/7705	11	Adjustable angular relationship	CPCONLY	Y10T83/7705		413
Y10T83/7709	10	Unidirectionally movable work support	CPCONLY	Y10T83/7709		104
Y10T83/7713	11	With opposed work-presser	CPCONLY	Y10T83/7713		24
Y10T83/7718	12	Presser co-axial with tool	CPCONLY	Y10T83/7718		24
Y10T83/7722	10	Support and tool relatively adjustable	CPCONLY	Y10T83/7722		215
Y10T83/7726	11	By movement of the tool	CPCONLY	Y10T83/7726		429
Y10T83/773	10	Work-support includes passageway for tool [e.g., slotted table]	CPCONLY	Y10T83/773		735
Y10T83/7734	9	With guard for tool	CPCONLY	Y10T83/7734		603
Y10T83/7738	9	Optional tool pairs alternatively operative	CPCONLY	Y10T83/7738		69
Y10T83/7743	10	One element of tool pairs common to all pairs	CPCONLY	Y10T83/7743		14
Y10T83/7747	9	With means to permit replacement of tool	CPCONLY	Y10T83/7747		186
Y10T83/7751	9	Means to separate elements of tool pair	CPCONLY	Y10T83/7751		214
Y10T83/7755	9	Carrier for rotatable tool movable during cutting	CPCONLY	Y10T83/7755		171
Y10T83/7759	10	Unicyclic movement	CPCONLY	Y10T83/7759		40
Y10T83/7763	10	Tool carrier reciprocable rectilinearly	CPCONLY	Y10T83/7763		353
Y10T83/7768	11	With means to adjust path of reciprocation	CPCONLY	Y10T83/7768		85
Y10T83/7772	12	Angular relative to previous path	CPCONLY	Y10T83/7772		304
Y10T83/7776	11	With means to reciprocate carrier	CPCONLY	Y10T83/7776		172
Y10T83/778	12	And means to rotate tool	CPCONLY	Y10T83/778		454
Y10T83/7784	11	With means to rotate tool	CPCONLY	Y10T83/7784		131
Y10T83/7788	10	Tool carrier oscillated or rotated	CPCONLY	Y10T83/7788		813
Y10T83/7793	9	Means to rotate or oscillate tool	CPCONLY	Y10T83/7793		346
Y10T83/7797	10	Including means to rotate both elements of tool pair	CPCONLY	Y10T83/7797		138
Y10T83/7801	11	Including means to rotate both elements at different speeds	CPCONLY	Y10T83/7801		38
Y10T83/7805	11	And means to change speed of rotation	CPCONLY	Y10T83/7805		20
Y10T83/7809	9	Tool pair comprises rotatable tools	CPCONLY	Y10T83/7809		149
Y10T83/7813	10	Tool pair elements angularly related	CPCONLY	Y10T83/7813		90
Y10T83/7818	11	Elements of tool pair angularly adjustable relative to each other	CPCONLY	Y10T83/7818		49
Y10T83/7822	10	Tool pair axially shiftable	CPCONLY	Y10T83/7822		132
Y10T83/7826	11	With shifting mechanism for at least one element of tool pair	CPCONLY	Y10T83/7826		180
Y10T83/783	10	Tool pair comprises contacting overlapped discs	CPCONLY	Y10T83/783		323
Y10T83/7834	11	With means to effect axial pressure on pair	CPCONLY	Y10T83/7834		126
Y10T83/7838	12	With means to change axial pressure	CPCONLY	Y10T83/7838		68
Y10T83/7843	11	With means to change overlap of discs	CPCONLY	Y10T83/7843		113
Y10T83/7847	10	Tool element axially shiftable	CPCONLY	Y10T83/7847		200
Y10T83/7851	10	Tool pair comprises disc and cylindrical anvil	CPCONLY	Y10T83/7851		126
Y10T83/7855	11	With adjustable means to urge tool elements together	CPCONLY	Y10T83/7855		117
Y10T83/7859	10	Elements of tool pair adjustably spaced	CPCONLY	Y10T83/7859		62
Y10T83/7863	9	Tool pair comprises rotatable tool and nonrotatable tool	CPCONLY	Y10T83/7863		213
Y10T83/7868	9	Tool element selectively operative	CPCONLY	Y10T83/7868		118
Y10T83/7872	9	Tool element mounted for adjustment	CPCONLY	Y10T83/7872		152
Y10T83/7876	10	Plural, axially spaced tool elements	CPCONLY	Y10T83/7876		233
Y10T83/788	8	Tool pair comprises rotatable anvil and fixed-type tool	CPCONLY	Y10T83/788		70
Y10T83/793	9	Anvil has motion in addition to rotation [i.e., traveling anvil]	CPCONLY	Y10T83/793		84
Y10T83/798	10	Additional motion is along fixed arcuate path	CPCONLY	Y10T83/798		57
Y10T83/803	10	With plural anvils	CPCONLY	Y10T83/803		56
Y10T83/808	8	Two tool pairs, driver for one pair moves relative to driver for other pair	CPCONLY	Y10T83/808		127
Y10T83/811	9	One tool support acts as driver for other	CPCONLY	Y10T83/811		30
Y10T83/814	10	Punch and shear	CPCONLY	Y10T83/814		80
Y10T83/817	9	With variable spacing between tool pairs	CPCONLY	Y10T83/817		62
Y10T83/819	10	With intermediate work support	CPCONLY	Y10T83/819		43
Y10T83/822	9	Punch and shear	CPCONLY	Y10T83/822		88
Y10T83/825	9	Successively acting	CPCONLY	Y10T83/825		182
Y10T83/828	8	With illuminating or viewing means for work	CPCONLY	Y10T83/828		293
Y10T83/839	9	Mirror or lens	CPCONLY	Y10T83/839		87
Y10T83/849	8	With signal, scale, or indicator	CPCONLY	Y10T83/849		136
Y10T83/85	9	Signal; e.g., alarm	CPCONLY	Y10T83/85		87
Y10T83/851	9	Indicator comprising work or product	CPCONLY	Y10T83/851		31
Y10T83/852	9	Responsive to force	CPCONLY	Y10T83/852		33
Y10T83/853	9	Indicates tool position	CPCONLY	Y10T83/853		103
Y10T83/855	10	Relative to another element	CPCONLY	Y10T83/855		38
Y10T83/856	11	To work-engaging member	CPCONLY	Y10T83/856		69
Y10T83/857	12	Calibrated scale or indicator	CPCONLY	Y10T83/857		162
Y10T83/858	13	Indicates dimension of work being cut	CPCONLY	Y10T83/858		267
Y10T83/859	14	Dynamic indicator	CPCONLY	Y10T83/859		194
Y10T83/86	11	To another tool assembly	CPCONLY	Y10T83/86		37
Y10T83/861	11	To cooperating tool	CPCONLY	Y10T83/861		25
Y10T83/862	11	To another component of tool assembly	CPCONLY	Y10T83/862		41
Y10T83/863	11	Adjustable guide for traversing tool; e.g., radial saw guide or miter saw guide	CPCONLY	Y10T83/863		78
Y10T83/865	9	Indicates work characteristic	CPCONLY	Y10T83/865		105
Y10T83/866	9	Indicates wear	CPCONLY	Y10T83/866		18
Y10T83/867	9	Bubble level	CPCONLY	Y10T83/867		2
Y10T83/868	9	Counter	CPCONLY	Y10T83/868		54
Y10T83/869	8	Means to drive or to guide tool	CPCONLY	Y10T83/869		254
Y10T83/8691	9	Unicyclic	CPCONLY	Y10T83/8691		223
Y10T83/8693	10	With adjustable stopping point or tool	CPCONLY	Y10T83/8693		32
Y10T83/8694	10	With brake or blocking means	CPCONLY	Y10T83/8694		93
Y10T83/8696	9	Means to change datum plane of tool or tool presser stroke	CPCONLY	Y10T83/8696		247
Y10T83/8697	10	For disabling of continuously actuated cutter	CPCONLY	Y10T83/8697		57
Y10T83/8699	10	With adjustable stop	CPCONLY	Y10T83/8699		117
Y10T83/87	10	By varying length of tool stroke	CPCONLY	Y10T83/87		233
Y10T83/8702	9	Clicker die press	CPCONLY	Y10T83/8702		28
Y10T83/8703	10	With die handling attachment	CPCONLY	Y10T83/8703		35
Y10T83/8704	10	With reciprocating presser	CPCONLY	Y10T83/8704		39
Y10T83/8706	11	Laterally movable to selective operative positions	CPCONLY	Y10T83/8706		40
Y10T83/8707	12	Pivotal or revolving only	CPCONLY	Y10T83/8707		18
Y10T83/8709	13	With means to impart, limit, or control pivotal motion of presser	CPCONLY	Y10T83/8709		16
Y10T83/871	14	Interrelated with presser reciprocating means	CPCONLY	Y10T83/871		31
Y10T83/8712	13	With means to mount presser for oscillation about column	CPCONLY	Y10T83/8712		20
Y10T83/8713	11	With adjustable bed block	CPCONLY	Y10T83/8713		27
Y10T83/8714	11	Including presser member reinforcing, or flexure compensating, means	CPCONLY	Y10T83/8714		27
Y10T83/8716	11	With manually actuated control apparatus for reciprocation of presser member	CPCONLY	Y10T83/8716		65
Y10T83/8717	9	By deforming resilient tool or tool support	CPCONLY	Y10T83/8717		100
Y10T83/8719	9	With transmission yieldable on overload	CPCONLY	Y10T83/8719		110
Y10T83/872	9	With guard means	CPCONLY	Y10T83/872		240
Y10T83/8722	10	Static	CPCONLY	Y10T83/8722		166
Y10T83/8723	11	Adjustable	CPCONLY	Y10T83/8723		120
Y10T83/8725	9	Including movable, tool protecting, cushioning sheet	CPCONLY	Y10T83/8725		89
Y10T83/8726	9	Single tool with plural selective driving means	CPCONLY	Y10T83/8726		90
Y10T83/8727	9	Plural tools selectively engageable with single drive	CPCONLY	Y10T83/8727		234
Y10T83/8729	10	Predetermined sequence of selection	CPCONLY	Y10T83/8729		47
Y10T83/873	11	Of paired tools	CPCONLY	Y10T83/873		21
Y10T83/8732	10	Turret of tools	CPCONLY	Y10T83/8732		317
Y10T83/8733	9	Tool movable to cooperate selectively with one of a plurality of mating tools	CPCONLY	Y10T83/8733		87
Y10T83/8735	9	With means providing for plural steps in tool stroke	CPCONLY	Y10T83/8735		177
Y10T83/8736	9	Sequential cutting motions	CPCONLY	Y10T83/8736		146
Y10T83/8737	9	With tool positioning means synchronized with cutting stroke	CPCONLY	Y10T83/8737		205
Y10T83/8739	10	Anvil moves into and out of operative position	CPCONLY	Y10T83/8739		68
Y10T83/874	10	Straight line positioning	CPCONLY	Y10T83/874		105
Y10T83/8742	9	Tool pair positionable as a unit	CPCONLY	Y10T83/8742		203
Y10T83/8743	10	Straight line positioning	CPCONLY	Y10T83/8743		285
Y10T83/8745	9	Tool and anvil relatively positionable	CPCONLY	Y10T83/8745		155
Y10T83/8746	10	Straight line	CPCONLY	Y10T83/8746		110
Y10T83/8748	9	Tool displaceable to inactive position [e.g., for work loading]	CPCONLY	Y10T83/8748		449
Y10T83/8749	10	By pivotal motion	CPCONLY	Y10T83/8749		422
Y10T83/875	9	With templet surface following tool	CPCONLY	Y10T83/875		249
Y10T83/8752	9	Tool moves work to and against cooperating tool	CPCONLY	Y10T83/8752		207
Y10T83/8753	10	With means to clamp or bind work to moving tool	CPCONLY	Y10T83/8753		103
Y10T83/8755	10	One tool resiliently mounted or biased	CPCONLY	Y10T83/8755		88
Y10T83/8756	10	Work forced through tool aperture or between spaced cooperating tools	CPCONLY	Y10T83/8756		91
Y10T83/8758	10	Manually actuated work-moving tool	CPCONLY	Y10T83/8758		51
Y10T83/8759	9	With means to connect or disconnect tool and its drive	CPCONLY	Y10T83/8759		241
Y10T83/8761	10	Continuously moving drive means [e.g., "gag"]	CPCONLY	Y10T83/8761		122
Y10T83/8762	11	Hand actuated connecting means	CPCONLY	Y10T83/8762		133
Y10T83/8763	9	Convertible from tool path to another or from implement to machine	CPCONLY	Y10T83/8763		483
Y10T83/8765	9	Magnet- or solenoid-actuated tool	CPCONLY	Y10T83/8765		210
Y10T83/8766	10	Tool movement modifies actuating circuit	CPCONLY	Y10T83/8766		50
Y10T83/8768	10	Solenoid core is tool or tool support	CPCONLY	Y10T83/8768		98
Y10T83/8769	9	Cutting tool operative in opposite directions of travel	CPCONLY	Y10T83/8769		248
Y10T83/8771	9	Motion direction of tool influenced by resistance of work	CPCONLY	Y10T83/8771		39
Y10T83/8772	9	One tool edge of tool pair encompasses work [e.g., wire cutter]	CPCONLY	Y10T83/8772		234
Y10T83/8773	9	Bevel or miter cut	CPCONLY	Y10T83/8773		826
Y10T83/8775	9	With tool tensioning means	CPCONLY	Y10T83/8775		96
Y10T83/8776	9	Constantly urged tool or tool support [e.g., spring biased]	CPCONLY	Y10T83/8776		359
Y10T83/8778	10	Ledger blade	CPCONLY	Y10T83/8778		91
Y10T83/8779	10	Oscillating tool urged axially	CPCONLY	Y10T83/8779		54
Y10T83/8781	11	And urged about pivotal axis	CPCONLY	Y10T83/8781		33
Y10T83/8782	10	Stored energy furnishes cutting force	CPCONLY	Y10T83/8782		127
Y10T83/8784	11	With reset	CPCONLY	Y10T83/8784		130
Y10T83/8785	10	Through return [noncutting] stroke	CPCONLY	Y10T83/8785		699
Y10T83/8786	11	Oscillating tool	CPCONLY	Y10T83/8786		344
Y10T83/8788	9	Tool return mechanism separate from tool advance mechanism	CPCONLY	Y10T83/8788		193
Y10T83/8789	9	With simple revolving motion only	CPCONLY	Y10T83/8789		369
Y10T83/8791	10	Tool mounted on radial face of rotor	CPCONLY	Y10T83/8791		228
Y10T83/8792	10	Variable speed during one revolution [e.g., intermittent]	CPCONLY	Y10T83/8792		53
Y10T83/8794	10	Revolving tool moves through recess in work holder or cooperating tool	CPCONLY	Y10T83/8794		121
Y10T83/8795	11	Progressively cutting	CPCONLY	Y10T83/8795		94
Y10T83/8796	10	Progressively cutting	CPCONLY	Y10T83/8796		159
Y10T83/8798	9	With simple oscillating motion only	CPCONLY	Y10T83/8798		177
Y10T83/8799	10	Plural tool pairs	CPCONLY	Y10T83/8799		126
Y10T83/8801	11	Plural tools on single oscillating arm [i.e., tool holder]	CPCONLY	Y10T83/8801		222
Y10T83/8802	10	And means to move cooperating cutter member	CPCONLY	Y10T83/8802		180
Y10T83/8804	10	Tool driver movable relative to tool support	CPCONLY	Y10T83/8804		159
Y10T83/8805	11	Cam or eccentric revolving about fixed axis	CPCONLY	Y10T83/8805		298
Y10T83/8807	11	Gear or ratchet pawl drives toothed tool support	CPCONLY	Y10T83/8807		71
Y10T83/8808	11	Toggle links, one link pivoted to tool support	CPCONLY	Y10T83/8808		77
Y10T83/8809	11	Fixed axis lever	CPCONLY	Y10T83/8809		238
Y10T83/8811	12	Adjustable mechanical advantage	CPCONLY	Y10T83/8811		34
Y10T83/8812	10	Cutting edge in radial plane	CPCONLY	Y10T83/8812		421
Y10T83/8814	11	Adjustable	CPCONLY	Y10T83/8814		112
Y10T83/8815	11	With guide means for the cutting member	CPCONLY	Y10T83/8815		140
Y10T83/8817	10	Axially entending cutting edge	CPCONLY	Y10T83/8817		119
Y10T83/8818	11	Axially progressing cut	CPCONLY	Y10T83/8818		96
Y10T83/882	11	Adjustable	CPCONLY	Y10T83/882		42
Y10T83/8821	9	With simple rectilinear reciprocating motion only	CPCONLY	Y10T83/8821		397
Y10T83/8822	10	Edge-to-edge of sheet or web [e.g., traveling cutter]	CPCONLY	Y10T83/8822		769
Y10T83/8824	10	With provision for dynamic balance	CPCONLY	Y10T83/8824		102
Y10T83/8825	10	With lost motion in tool drive	CPCONLY	Y10T83/8825		120
Y10T83/8827	10	Means to vary force on, or speed of, tool during stroke	CPCONLY	Y10T83/8827		136
Y10T83/8828	10	Plural tools with same drive means	CPCONLY	Y10T83/8828		445
Y10T83/883	11	Tools positioned by template	CPCONLY	Y10T83/883		61
Y10T83/8831	11	Plural distinct cutting edges on same support	CPCONLY	Y10T83/8831		881
Y10T83/8832	12	Concentrically mounted	CPCONLY	Y10T83/8832		86
Y10T83/8834	12	Successively acting	CPCONLY	Y10T83/8834		216
Y10T83/8835	10	And means to move cooperating cutting member	CPCONLY	Y10T83/8835		285
Y10T83/8837	10	With application of force to opposite ends of tool supporting crosshead	CPCONLY	Y10T83/8837		125
Y10T83/8838	11	By relatively movable fixed axis levers	CPCONLY	Y10T83/8838		50
Y10T83/884	11	By connecting rod articulated with tool support	CPCONLY	Y10T83/884		109
Y10T83/8841	10	Tool driver movable relative to tool support	CPCONLY	Y10T83/8841		195
Y10T83/8843	11	Cam or eccentric revolving about fixed axis	CPCONLY	Y10T83/8843		803
Y10T83/8844	11	Gear actuated tool support	CPCONLY	Y10T83/8844		177
Y10T83/8845	11	Toggle links, one link pivoted to tool support	CPCONLY	Y10T83/8845		227
Y10T83/8847	11	Screw actuated tool support	CPCONLY	Y10T83/8847		134
Y10T83/8848	11	Connecting rod articulated with tool support	CPCONLY	Y10T83/8848		278
Y10T83/885	11	Fixed axis lever	CPCONLY	Y10T83/885		438
Y10T83/8851	12	Adjustable mechanical advantage	CPCONLY	Y10T83/8851		30
Y10T83/8853	11	Including details of guide for tool or tool support	CPCONLY	Y10T83/8853		300
Y10T83/8854	10	Progressively cutting	CPCONLY	Y10T83/8854		296
Y10T83/8855	10	With spaced guide pins [e.g., die set leader pins]	CPCONLY	Y10T83/8855		154
Y10T83/8857	10	With inclined guides	CPCONLY	Y10T83/8857		132
Y10T83/8858	10	Fluid pressure actuated	CPCONLY	Y10T83/8858		435
Y10T83/886	11	Utilizing fluid amplifier	CPCONLY	Y10T83/886		6
Y10T83/8861	11	Diaphragm	CPCONLY	Y10T83/8861		12
Y10T83/8863	11	Explosive fluid	CPCONLY	Y10T83/8863		57
Y10T83/8864	11	Plural cylinders	CPCONLY	Y10T83/8864		106
Y10T83/8866	11	Offset cutter	CPCONLY	Y10T83/8866		109
Y10T83/8867	10	With means to adjust tool position on tool holder	CPCONLY	Y10T83/8867		173
Y10T83/8868	11	Adjustably mounted cooperating tool	CPCONLY	Y10T83/8868		139
Y10T83/887	9	Parallel draw-cut [e.g., translatory]	CPCONLY	Y10T83/887		97
Y10T83/8871	10	Link suspension	CPCONLY	Y10T83/8871		144
Y10T83/8873	9	Straight line motion combined with tilting in plane of stroke	CPCONLY	Y10T83/8873		106
Y10T83/8874	9	Uniplanar compound motion	CPCONLY	Y10T83/8874		253
Y10T83/8876	10	Reciprocating plus work approach [e.g., saw type]	CPCONLY	Y10T83/8876		218
Y10T83/8877	10	With gyratory drive	CPCONLY	Y10T83/8877		104
Y10T83/8878	9	Guide	CPCONLY	Y10T83/8878		332
Y10T83/888	10	With nonrigidly positioned member	CPCONLY	Y10T83/888		101
Y10T83/8881	10	With anti-friction means	CPCONLY	Y10T83/8881		143
Y10T83/8883	11	Roller with peripheral flange or groove	CPCONLY	Y10T83/8883		64
Y10T83/8884	11	Disc	CPCONLY	Y10T83/8884		46
Y10T83/8886	10	With means to vary space between opposed members	CPCONLY	Y10T83/8886		51
Y10T83/8887	11	By rectilinear movement of member	CPCONLY	Y10T83/8887		108
Y10T83/8889	10	With means to adjust position	CPCONLY	Y10T83/8889		244
Y10T83/889	8	Tool with either work holder or means to hold work supply	CPCONLY	Y10T83/889		352
Y10T83/896	9	Rotatable wound package supply	CPCONLY	Y10T83/896		591
Y10T83/902	10	Plural supply sources	CPCONLY	Y10T83/902		185
Y10T83/909	8	Cutter assemblage or cutter element therefor [e.g., chain saw chain]	CPCONLY	Y10T83/909		191
Y10T83/913	9	With means permitting removal of cutter element	CPCONLY	Y10T83/913		99
Y10T83/917	9	Having diverse cutting elements	CPCONLY	Y10T83/917		79
Y10T83/921	10	And noncutting depth gauge	CPCONLY	Y10T83/921		77
Y10T83/925	9	Having noncutting depth gauge	CPCONLY	Y10T83/925		166
Y10T83/929	8	Tool or tool with support	CPCONLY	Y10T83/929		305
Y10T83/9292	9	Wire tool	CPCONLY	Y10T83/9292		476
Y10T83/9295	9	Work supported tool [e.g., clicker die]	CPCONLY	Y10T83/9295		124
Y10T83/9297	10	With product ejection facilitator	CPCONLY	Y10T83/9297		23
Y10T83/93	10	With tool manipulating portion	CPCONLY	Y10T83/93		25
Y10T83/9302	10	With tool positioning abutment	CPCONLY	Y10T83/9302		24
Y10T83/9304	10	To sever article from work and cut within article	CPCONLY	Y10T83/9304		27
Y10T83/9307	10	With tool contour adjusting means	CPCONLY	Y10T83/9307		27
Y10T83/9309	9	Anvil	CPCONLY	Y10T83/9309		241
Y10T83/9312	10	Rotatable type	CPCONLY	Y10T83/9312		241
Y10T83/9314	9	Pointed perforators	CPCONLY	Y10T83/9314		340
Y10T83/9317	9	Endless band or belt type	CPCONLY	Y10T83/9317		187
Y10T83/9319	9	Toothed blade or tooth therefor	CPCONLY	Y10T83/9319		607
Y10T83/9321	10	With means to vary tooth position	CPCONLY	Y10T83/9321		61
Y10T83/9324	10	With additional cutting means	CPCONLY	Y10T83/9324		115
Y10T83/9326	10	Plural separable sections	CPCONLY	Y10T83/9326		88
Y10T83/9329	11	Tooth separable from blade	CPCONLY	Y10T83/9329		110
Y10T83/9331	12	By independent connecting element	CPCONLY	Y10T83/9331		110
Y10T83/9333	13	Transversely movable	CPCONLY	Y10T83/9333		114
Y10T83/9336	13	Arcuately movable	CPCONLY	Y10T83/9336		109
Y10T83/9338	14	With additional element to prevent movement of connecting element	CPCONLY	Y10T83/9338		34
Y10T83/9341	13	Rectilinearly movable	CPCONLY	Y10T83/9341		67
Y10T83/9343	12	By deformation	CPCONLY	Y10T83/9343		88
Y10T83/9346	10	Uniformly varying teeth or tooth spacing	CPCONLY	Y10T83/9346		127
Y10T83/9348	10	Undulating tooth arrangement	CPCONLY	Y10T83/9348		39
Y10T83/935	10	Plural tooth groups	CPCONLY	Y10T83/935		204
Y10T83/9353	11	Including raker tooth group	CPCONLY	Y10T83/9353		78
Y10T83/9355	11	Including intermediate raker tooth	CPCONLY	Y10T83/9355		73
Y10T83/9358	10	Series of dissimilar teeth	CPCONLY	Y10T83/9358		112
Y10T83/936	10	Series of allochiral teeth	CPCONLY	Y10T83/936		102
Y10T83/9362	10	Teeth having transversely curved cutting edge	CPCONLY	Y10T83/9362		78
Y10T83/9365	10	Teeth having cutting edge parallel to blade surface	CPCONLY	Y10T83/9365		97
Y10T83/9367	10	Teeth having cutting edge perpendicular to blade surface	CPCONLY	Y10T83/9367		139
Y10T83/937	9	Tool mounted by and between spaced arms	CPCONLY	Y10T83/937		203
Y10T83/9372	9	Rotatable type	CPCONLY	Y10T83/9372		391
Y10T83/9374	10	With spacer interposed between shaft-mounted tools	CPCONLY	Y10T83/9374		115
Y10T83/9377	10	Mounting of tool about rod-type shaft	CPCONLY	Y10T83/9377		291
Y10T83/9379	11	At end of shaft	CPCONLY	Y10T83/9379		296
Y10T83/9382	10	Punching plus nonpunching tool	CPCONLY	Y10T83/9382		37
Y10T83/9384	10	Notching plus nonnotching tool	CPCONLY	Y10T83/9384		24
Y10T83/9387	10	Punching tool	CPCONLY	Y10T83/9387		117
Y10T83/9389	11	Shear type	CPCONLY	Y10T83/9389		65
Y10T83/9391	10	Notching tool	CPCONLY	Y10T83/9391		55
Y10T83/9394	10	Helical tool	CPCONLY	Y10T83/9394		151
Y10T83/9396	10	Shear type	CPCONLY	Y10T83/9396		201
Y10T83/9399	11	Cutting edge wholly parallel to axis of rotation	CPCONLY	Y10T83/9399		172
Y10T83/9401	11	Cutting edge wholly normal to axis of rotation	CPCONLY	Y10T83/9401		209
Y10T83/9403	10	Disc type	CPCONLY	Y10T83/9403		545
Y10T83/9406	10	Radially adjustable tool	CPCONLY	Y10T83/9406		108
Y10T83/9408	10	Spaced cut forming tool	CPCONLY	Y10T83/9408		245
Y10T83/9411	9	Cutting couple type	CPCONLY	Y10T83/9411		182
Y10T83/9413	10	Spiral type cutter	CPCONLY	Y10T83/9413		22
Y10T83/9416	10	To punch and cut punched article	CPCONLY	Y10T83/9416		85
Y10T83/9418	10	Punching plus nonpunching tool	CPCONLY	Y10T83/9418		159
Y10T83/942	10	Notching plus nonnotching tool	CPCONLY	Y10T83/942		41
Y10T83/9423	10	Punching tool	CPCONLY	Y10T83/9423		360
Y10T83/9425	11	Tool pair	CPCONLY	Y10T83/9425		423
Y10T83/9428	11	Shear-type male tool	CPCONLY	Y10T83/9428		318
Y10T83/943	12	Multiple punchings	CPCONLY	Y10T83/943		300
Y10T83/9432	12	Plural spaced successively operative shearing portions	CPCONLY	Y10T83/9432		48
Y10T83/9435	12	Progressive cutting	CPCONLY	Y10T83/9435		114
Y10T83/9437	11	Shear-type female tool	CPCONLY	Y10T83/9437		166
Y10T83/944	11	Multiple punchings	CPCONLY	Y10T83/944		216
Y10T83/9442	10	Notching tool	CPCONLY	Y10T83/9442		42
Y10T83/9444	11	Shear type	CPCONLY	Y10T83/9444		135
Y10T83/9447	10	Shear type	CPCONLY	Y10T83/9447		836
Y10T83/9449	10	Spaced cut forming tool	CPCONLY	Y10T83/9449		140
Y10T83/9452	10	With tool contour adjusting means	CPCONLY	Y10T83/9452		98
Y10T83/9454	9	Reciprocable type	CPCONLY	Y10T83/9454		409
Y10T83/9457	9	Joint or connection	CPCONLY	Y10T83/9457		359
Y10T83/9459	10	Magnetic connection	CPCONLY	Y10T83/9459		82
Y10T83/9461	10	Resiliently biased connection	CPCONLY	Y10T83/9461		161
Y10T83/9464	10	For rotary tool	CPCONLY	Y10T83/9464		474
Y10T83/9466	11	Flexible sleevelike tool	CPCONLY	Y10T83/9466		68
Y10T83/9469	11	Adjustable	CPCONLY	Y10T83/9469		197
Y10T83/9471	12	Rectilinearly	CPCONLY	Y10T83/9471		155
Y10T83/9473	10	For rectilinearly reciprocating tool	CPCONLY	Y10T83/9473		227
Y10T83/9476	11	Tool is single element with continuous cutting edge [e.g., punch, etc.]	CPCONLY	Y10T83/9476		399
Y10T83/9478	11	Tool is single element reciprocable generally perpendicularly to elongate cutting edge [e.g., shear, etc.]	CPCONLY	Y10T83/9478		133
Y10T83/9481	11	Tool is single element reciprocable along elongate cutting edge [e.g., saw blade, etc.]	CPCONLY	Y10T83/9481		225
Y10T83/9483	11	Adjustable	CPCONLY	Y10T83/9483		173
Y10T83/9486	12	Rectilinearly	CPCONLY	Y10T83/9486		262
Y10T83/9488	10	Adjustable	CPCONLY	Y10T83/9488		209
Y10T83/949	11	Rectilinearly	CPCONLY	Y10T83/949		203
Y10T83/9493	9	Stationary cutter	CPCONLY	Y10T83/9493		225
Y10T83/9495	10	Nonparallel cutting edges	CPCONLY	Y10T83/9495		131
Y10T83/9498	10	Parallel cutting edges	CPCONLY	Y10T83/9498		147
Y10T83/95	8	Machine frame	CPCONLY	Y10T83/95		272
Y10T83/96	9	Guard	CPCONLY	Y10T83/96		190
Y10T83/97	8	Miscellaneous	CPCONLY	Y10T83/97		423
Y10T117/00	7	Single-crystal, oriented-crystal, and epitaxy growth processes; non-coating apparatus therefor	CPCONLY	Y10T117/00		12
Y10T117/10	8	Apparatus	CPCONLY	Y10T117/10		674
Y10T117/1004	9	with means for measuring, testing, or sensing	CPCONLY	Y10T117/1004		313
Y10T117/1008	10	with responsive control means	CPCONLY	Y10T117/1008		413
Y10T117/1012	10	with a window or port for visual observation or examination	CPCONLY	Y10T117/1012		62
Y10T117/1016	9	with means for treating single-crystal [e.g., heat treating]	CPCONLY	Y10T117/1016		171
Y10T117/102	9	for forming a platelet shape or a small diameter, elongate, generally cylindrical shape [e.g., whisker, fiber, needle, filament]	CPCONLY	Y10T117/102		58
Y10T117/1024	9	for crystallization from liquid or supercritical state	CPCONLY	Y10T117/1024		319
Y10T117/1028	10	Crucibleless apparatus having means providing movement of discrete droplets or solid particles to thin-film precursor [e.g., Verneuil method]	CPCONLY	Y10T117/1028		46
Y10T117/1032	10	Seed pulling	CPCONLY	Y10T117/1032		421
Y10T117/1036	11	including solid member shaping means other than seed or product [e.g., EDFG die]	CPCONLY	Y10T117/1036		53
Y10T117/104	12	Means for forming a hollow structure [e.g., tube, polygon]	CPCONLY	Y10T117/104		39
Y10T117/1044	12	including means forming a flat shape [e.g., ribbon]	CPCONLY	Y10T117/1044		91
Y10T117/1048	13	Pulling includes a horizontal component	CPCONLY	Y10T117/1048		40
Y10T117/1052	11	including a sectioned crucible [e.g., double crucible, baffle]	CPCONLY	Y10T117/1052		202
Y10T117/1056	11	including details of precursor replenishment	CPCONLY	Y10T117/1056		161
Y10T117/106	11	including sealing means details	CPCONLY	Y10T117/106		55
Y10T117/1064	11	including a fully-sealed or vacuum-maintained crystallization chamber [e.g., ampoule]	CPCONLY	Y10T117/1064		91
Y10T117/1068	11	including heating or cooling details [e.g., shield configuration]	CPCONLY	Y10T117/1068		466
Y10T117/1072	11	including details of means providing product movement [e.g., shaft guides, servo means]	CPCONLY	Y10T117/1072		302
Y10T117/1076	10	having means for producing a moving solid-liquid-solid zone	CPCONLY	Y10T117/1076		70
Y10T117/108	11	Including a solid member other than seed or product contacting the liquid [e.g., crucible, immersed heating element]	CPCONLY	Y10T117/108		68
Y10T117/1084	11	having details of a stabilizing feature	CPCONLY	Y10T117/1084		64
Y10T117/1088	11	including heating or cooling details	CPCONLY	Y10T117/1088		229
Y10T117/1092	10	Shape defined by a solid member other than seed or product [e.g., Bridgman-Stockbarger]	CPCONLY	Y10T117/1092		203
Y10T117/1096	10	including pressurized crystallization means [e.g., hydrothermal]	CPCONLY	Y10T117/1096		100
Y10T137/00	7	Fluid handling	CPCONLY	Y10T137/00		2
Y10T137/0318	8	Processes	CPCONLY	Y10T137/0318		3093
Y10T137/0324	9	With control of flow by a condition or characteristic of a fluid	CPCONLY	Y10T137/0324		864
Y10T137/0329	10	Mixing of plural fluids of diverse characteristics or conditions	CPCONLY	Y10T137/0329		537
Y10T137/0335	11	Controlled by consistency of mixture	CPCONLY	Y10T137/0335		153
Y10T137/034	11	Controlled by conductivity of mixture	CPCONLY	Y10T137/034		150
Y10T137/0346	11	Controlled by heat of combustion of mixture	CPCONLY	Y10T137/0346		46
Y10T137/0352	11	Controlled by pressure	CPCONLY	Y10T137/0352		207
Y10T137/0357	10	For producing uniform flow	CPCONLY	Y10T137/0357		162
Y10T137/0363	10	For producing proportionate flow	CPCONLY	Y10T137/0363		178
Y10T137/0368	10	By speed of fluid	CPCONLY	Y10T137/0368		140
Y10T137/0374	10	For regulating boiler feed water level	CPCONLY	Y10T137/0374		31
Y10T137/0379	10	By fluid pressure	CPCONLY	Y10T137/0379		581
Y10T137/0385	9	Carbonated beverage handling processes	CPCONLY	Y10T137/0385		46
Y10T137/0391	9	Affecting flow by the addition of material or energy	CPCONLY	Y10T137/0391		1100
Y10T137/0396	9	Involving pressure control	CPCONLY	Y10T137/0396		1072
Y10T137/0402	9	Cleaning, repairing, or assembling	CPCONLY	Y10T137/0402		697
Y10T137/0407	10	Repairing or assembling hydrant [e.g., fireplug, etc.]	CPCONLY	Y10T137/0407		43
Y10T137/0413	10	Gas or water meter repairing or assembling	CPCONLY	Y10T137/0413		40
Y10T137/0419	10	Fluid cleaning or flushing	CPCONLY	Y10T137/0419		182
Y10T137/0424	11	Liquid cleaning or flushing	CPCONLY	Y10T137/0424		136
Y10T137/043	12	Valve or valve seat cleaning	CPCONLY	Y10T137/043		69
Y10T137/0435	10	Mechanical cleaning [e.g., pig, etc.]	CPCONLY	Y10T137/0435		61
Y10T137/0441	10	Repairing, securing, replacing, or servicing pipe joint, valve, or tank	CPCONLY	Y10T137/0441		221
Y10T137/0447	11	Including joint or coupling	CPCONLY	Y10T137/0447		165
Y10T137/0452	11	Detecting or repairing leak	CPCONLY	Y10T137/0452		125
Y10T137/0458	11	Tapping pipe, keg, or tank	CPCONLY	Y10T137/0458		71
Y10T137/0463	12	Particular aperture forming means	CPCONLY	Y10T137/0463		58
Y10T137/0469	13	Cutter or cutting tool	CPCONLY	Y10T137/0469		83
Y10T137/0475	13	Having deformable or inflatable means	CPCONLY	Y10T137/0475		36
Y10T137/048	11	With content loading or unloading [e.g., dispensing, discharge assistant, etc.]	CPCONLY	Y10T137/048		52
Y10T137/0486	11	Specific valve or valve element mounting or repairing	CPCONLY	Y10T137/0486		167
Y10T137/0491	10	Valve or valve element assembling, disassembling, or replacing	CPCONLY	Y10T137/0491		494
Y10T137/0497	11	Fluid actuated or retarded	CPCONLY	Y10T137/0497		103
Y10T137/0502	11	Multi way valve	CPCONLY	Y10T137/0502		49
Y10T137/0508	11	Ball valve or rotary ball valve	CPCONLY	Y10T137/0508		105
Y10T137/0514	11	Gate valve	CPCONLY	Y10T137/0514		44
Y10T137/0519	11	Plug valve	CPCONLY	Y10T137/0519		44
Y10T137/0525	11	Butterfly valve	CPCONLY	Y10T137/0525		74
Y10T137/053	11	Float valve	CPCONLY	Y10T137/053		61
Y10T137/0536	8	Highspeed fluid intake means [e.g., jet engine intake]	CPCONLY	Y10T137/0536		385
Y10T137/0645	9	With condition responsive control means	CPCONLY	Y10T137/0645		96
Y10T137/0753	8	Control by change of position or inertia of system	CPCONLY	Y10T137/0753		656
Y10T137/0777	9	With second control	CPCONLY	Y10T137/0777		282
Y10T137/0801	9	Position relative body of water [e.g., marine governors]	CPCONLY	Y10T137/0801		21
Y10T137/0826	10	Float controlled	CPCONLY	Y10T137/0826		23
Y10T137/085	10	Pressure or head controlled	CPCONLY	Y10T137/085		47
Y10T137/0874	9	Vent opening or closing on tipping container	CPCONLY	Y10T137/0874		535
Y10T137/0898	9	By shifting of liquid level	CPCONLY	Y10T137/0898		65
Y10T137/0923	9	By pendulum or swinging member	CPCONLY	Y10T137/0923		307
Y10T137/0947	10	With servo connection to valve	CPCONLY	Y10T137/0947		52
Y10T137/0971	8	Speed responsive valve control	CPCONLY	Y10T137/0971		216
Y10T137/0989	9	Acceleration responsive valve control	CPCONLY	Y10T137/0989		127
Y10T137/1007	9	With manual valve control	CPCONLY	Y10T137/1007		208
Y10T137/1026	9	Speed change and excess speed valve control	CPCONLY	Y10T137/1026		80
Y10T137/1044	9	With other condition responsive valve control	CPCONLY	Y10T137/1044		178
Y10T137/1062	10	Governor drive failure responsive	CPCONLY	Y10T137/1062		85
Y10T137/108	9	Centrifugal mass type [exclusive of liquid]	CPCONLY	Y10T137/108		387
Y10T137/1098	10	With multiple valves	CPCONLY	Y10T137/1098		194
Y10T137/1116	10	Periodically actuated valve	CPCONLY	Y10T137/1116		69
Y10T137/1135	10	Rotating valve and rotating governor	CPCONLY	Y10T137/1135		315
Y10T137/1153	10	Excess speed responsive	CPCONLY	Y10T137/1153		154
Y10T137/1171	10	With fluid servo-motor	CPCONLY	Y10T137/1171		190
Y10T137/1189	8	Freeze condition responsive safety systems	CPCONLY	Y10T137/1189		174
Y10T137/1244	9	With freeze waste	CPCONLY	Y10T137/1244		69
Y10T137/1298	9	Stop and waste	CPCONLY	Y10T137/1298		55
Y10T137/1353	9	Low temperature responsive drains	CPCONLY	Y10T137/1353		177
Y10T137/1407	8	Combustion failure responsive fuel safety cut-off for burners	CPCONLY	Y10T137/1407		204
Y10T137/1516	9	Thermo-electric	CPCONLY	Y10T137/1516		379
Y10T137/1624	8	Destructible or deformable element controlled	CPCONLY	Y10T137/1624		295
Y10T137/1632	9	Destructible element	CPCONLY	Y10T137/1632		271
Y10T137/1639	10	Combined destructible and fusible element	CPCONLY	Y10T137/1639		56
Y10T137/1647	10	Explosive actuation	CPCONLY	Y10T137/1647		272
Y10T137/1654	10	Separable valve coupling or conduit	CPCONLY	Y10T137/1654		239
Y10T137/1662	11	Tensile or sheer pin or bolt	CPCONLY	Y10T137/1662		67
Y10T137/1669	10	Tensile or sheer pin or bolt	CPCONLY	Y10T137/1669		63
Y10T137/1677	11	Pressure causes pin or bolt to destruct	CPCONLY	Y10T137/1677		61
Y10T137/1684	10	With alarm or indicator	CPCONLY	Y10T137/1684		46
Y10T137/1692	10	Rupture disc	CPCONLY	Y10T137/1692		182
Y10T137/1699	11	Means for holding entire disc after rupture	CPCONLY	Y10T137/1699		40
Y10T137/1707	11	Disc burst after destruction of additional element	CPCONLY	Y10T137/1707		57
Y10T137/1714	11	Direct pressure causes disc to burst	CPCONLY	Y10T137/1714		282
Y10T137/1722	12	Two-way rupture disc	CPCONLY	Y10T137/1722		22
Y10T137/1729	12	Dome shape	CPCONLY	Y10T137/1729		78
Y10T137/1737	13	Reverse buckling	CPCONLY	Y10T137/1737		82
Y10T137/1744	11	Specific weakening point	CPCONLY	Y10T137/1744		130
Y10T137/1752	11	Integral disc assembly	CPCONLY	Y10T137/1752		73
Y10T137/1759	11	Knife or cutter causes disc to break	CPCONLY	Y10T137/1759		70
Y10T137/1767	12	Movable knife or cutter	CPCONLY	Y10T137/1767		172
Y10T137/1774	10	With counterbalancing element	CPCONLY	Y10T137/1774		79
Y10T137/1782	10	Frangible element returns pressure responsive valve	CPCONLY	Y10T137/1782		173
Y10T137/1789	10	Having pressure responsive valve	CPCONLY	Y10T137/1789		319
Y10T137/1797	9	Heat destructible or fusible	CPCONLY	Y10T137/1797		430
Y10T137/1804	10	With second sensing means	CPCONLY	Y10T137/1804		209
Y10T137/1812	10	In fluid flow path	CPCONLY	Y10T137/1812		352
Y10T137/1819	10	Safety cut-off	CPCONLY	Y10T137/1819		408
Y10T137/1827	11	With heater for destructible or fusible element	CPCONLY	Y10T137/1827		55
Y10T137/1834	11	With external closing means	CPCONLY	Y10T137/1834		210
Y10T137/1842	8	Ambient condition change responsive	CPCONLY	Y10T137/1842		93
Y10T137/1866	9	For controlling soil irrigation	CPCONLY	Y10T137/1866		117
Y10T137/189	10	Soil moisture sensing	CPCONLY	Y10T137/189		209
Y10T137/1915	9	Burner gas cutoff	CPCONLY	Y10T137/1915		41
Y10T137/1939	9	Atmospheric	CPCONLY	Y10T137/1939		70
Y10T137/1963	10	Temperature	CPCONLY	Y10T137/1963		512
Y10T137/1987	11	With additional diverse control	CPCONLY	Y10T137/1987		256
Y10T137/2012	10	Pressure	CPCONLY	Y10T137/2012		361
Y10T137/2036	9	Underwater	CPCONLY	Y10T137/2036		92
Y10T137/206	8	Flow affected by fluid contact, energy field or coanda effect [e.g., pure fluid device or system]	CPCONLY	Y10T137/206		195
Y10T137/2065	9	Responsive to condition external of system	CPCONLY	Y10T137/2065		151
Y10T137/2071	10	And causing change or correction of sensed condition	CPCONLY	Y10T137/2071		174
Y10T137/2076	9	Utilizing diverse fluids	CPCONLY	Y10T137/2076		158
Y10T137/2082	9	Utilizing particular fluid	CPCONLY	Y10T137/2082		141
Y10T137/2087	9	Means to cause rotational flow of fluid [e.g., vortex generator]	CPCONLY	Y10T137/2087		159
Y10T137/2093	10	Plural vortex generators	CPCONLY	Y10T137/2093		107
Y10T137/2098	10	Vortex generator as control for system	CPCONLY	Y10T137/2098		157
Y10T137/2104	10	Vortex generator in interaction chamber of device	CPCONLY	Y10T137/2104		91
Y10T137/2109	10	By tangential input to axial output [e.g., vortex amplifier]	CPCONLY	Y10T137/2109		110
Y10T137/2115	11	With means to vary input or output of device	CPCONLY	Y10T137/2115		101
Y10T137/212	9	System comprising plural fluidic devices or stages	CPCONLY	Y10T137/212		85
Y10T137/2125	10	Plural power inputs [e.g., parallel inputs]	CPCONLY	Y10T137/2125		51
Y10T137/2131	11	Variable or different-value power inputs	CPCONLY	Y10T137/2131		34
Y10T137/2136	12	Pulsating power input and continuous-flow power input	CPCONLY	Y10T137/2136		14
Y10T137/2142	11	With variable or selectable source of control-input signal	CPCONLY	Y10T137/2142		78
Y10T137/2147	11	To cascaded plural devices	CPCONLY	Y10T137/2147		162
Y10T137/2153	12	With feedback passage[s] between devices of cascade	CPCONLY	Y10T137/2153		61
Y10T137/2158	12	With pulsed control-input signal	CPCONLY	Y10T137/2158		147
Y10T137/2164	9	Plural power inputs to single device	CPCONLY	Y10T137/2164		36
Y10T137/2169	10	Intersecting at interaction region [e.g., comparator]	CPCONLY	Y10T137/2169		55
Y10T137/2174	11	Co-lineal, oppositely-directed power inputs [e.g., impact modulator]	CPCONLY	Y10T137/2174		56
Y10T137/218	9	Means to regulate or vary operation of device	CPCONLY	Y10T137/218		97
Y10T137/2185	10	To vary frequency of pulses or oscillations	CPCONLY	Y10T137/2185		103
Y10T137/2191	10	By non-fluid energy field affecting input [e.g., transducer]	CPCONLY	Y10T137/2191		200
Y10T137/2196	11	Acoustical or thermal energy	CPCONLY	Y10T137/2196		191
Y10T137/2202	10	By movable element	CPCONLY	Y10T137/2202		173
Y10T137/2207	11	Operating at timed intervals [e.g., to produce pulses]	CPCONLY	Y10T137/2207		30
Y10T137/2213	11	Electrically-actuated element [e.g., electro-mechanical transducer]	CPCONLY	Y10T137/2213		146
Y10T137/2218	11	Means [e.g., valve] in control input	CPCONLY	Y10T137/2218		103
Y10T137/2224	9	Structure of body of device	CPCONLY	Y10T137/2224		424
Y10T137/2229	9	Device including passages having V over T configuration	CPCONLY	Y10T137/2229		51
Y10T137/2234	10	And feedback passage[s] or path[s]	CPCONLY	Y10T137/2234		142
Y10T137/224	10	With particular characteristics of control input	CPCONLY	Y10T137/224		81
Y10T137/2245	11	Multiple control-input passages	CPCONLY	Y10T137/2245		63
Y10T137/2251	10	And multiple or joined power-outlet passages	CPCONLY	Y10T137/2251		57
Y10T137/2256	10	And enlarged interaction chamber	CPCONLY	Y10T137/2256		99
Y10T137/2262	10	And vent passage[s]	CPCONLY	Y10T137/2262		65
Y10T137/2267	9	Device including passages having V over gamma configuration	CPCONLY	Y10T137/2267		71
Y10T137/2273	9	Device including linearly-aligned power stream emitter and power stream collector	CPCONLY	Y10T137/2273		175
Y10T137/2278	8	Pressure modulating relays or followers	CPCONLY	Y10T137/2278		699
Y10T137/2322	9	Jet control type	CPCONLY	Y10T137/2322		374
Y10T137/2365	9	Plural series units	CPCONLY	Y10T137/2365		180
Y10T137/2409	9	With counter-balancing pressure feedback to the modulating device	CPCONLY	Y10T137/2409		946
Y10T137/2452	10	With counter-counter balancing pressure feedback	CPCONLY	Y10T137/2452		238
Y10T137/2496	8	Self-proportioning or correlating systems	CPCONLY	Y10T137/2496		189
Y10T137/2499	9	Mixture condition maintaining or sensing	CPCONLY	Y10T137/2499		512
Y10T137/2501	10	Dividing and recombining flow	CPCONLY	Y10T137/2501		67
Y10T137/2504	10	By specific gravity	CPCONLY	Y10T137/2504		137
Y10T137/2506	10	By viscosity or consistency	CPCONLY	Y10T137/2506		294
Y10T137/2509	10	By optical or chemical property	CPCONLY	Y10T137/2509		468
Y10T137/2511	9	Fuel controlled by boiler or water system condition	CPCONLY	Y10T137/2511		205
Y10T137/2514	9	Self-proportioning flow systems	CPCONLY	Y10T137/2514		610
Y10T137/2516	10	Interconnected flow displacement elements	CPCONLY	Y10T137/2516		400
Y10T137/2519	11	Movable trap chamber	CPCONLY	Y10T137/2519		38
Y10T137/2521	10	Flow comparison or differential response	CPCONLY	Y10T137/2521		544
Y10T137/2524	11	Flow dividers [e.g., reversely acting controls]	CPCONLY	Y10T137/2524		284
Y10T137/2526	11	Main line flow displaces or entrains material from reservoir	CPCONLY	Y10T137/2526		118
Y10T137/2529	11	With electrical controller	CPCONLY	Y10T137/2529		180
Y10T137/2531	10	Flow displacement element actuates electrical controller	CPCONLY	Y10T137/2531		104
Y10T137/2534	10	Liquid level response	CPCONLY	Y10T137/2534		114
Y10T137/2536	11	Float controlled weir or valve	CPCONLY	Y10T137/2536		117
Y10T137/2539	11	Swinging outlet pipe controller	CPCONLY	Y10T137/2539		34
Y10T137/2541	10	With measuring type discharge assistant	CPCONLY	Y10T137/2541		43
Y10T137/2544	9	Supply and exhaust type	CPCONLY	Y10T137/2544		960
Y10T137/2546	10	Vacuum or suction pulsator type [e.g., milking machine]	CPCONLY	Y10T137/2546		127
Y10T137/2549	11	With trip linkage or snap action	CPCONLY	Y10T137/2549		82
Y10T137/2552	11	With pulsation responsive pilot valve	CPCONLY	Y10T137/2552		48
Y10T137/2554	10	Reversing or 4-way valve systems	CPCONLY	Y10T137/2554		218
Y10T137/2557	10	Waste responsive to flow stoppage	CPCONLY	Y10T137/2557		289
Y10T137/2559	9	Self-controlled branched flow systems	CPCONLY	Y10T137/2559		149
Y10T137/2562	10	Dividing and recombining	CPCONLY	Y10T137/2562		434
Y10T137/2564	10	Plural inflows	CPCONLY	Y10T137/2564		344
Y10T137/2567	11	Alternate or successive inflows	CPCONLY	Y10T137/2567		528
Y10T137/2569	12	Control by depletion of source	CPCONLY	Y10T137/2569		301
Y10T137/2572	11	One inflow supplements another	CPCONLY	Y10T137/2572		513
Y10T137/2574	10	Bypass or relief controlled by main line fluid condition	CPCONLY	Y10T137/2574		107
Y10T137/2577	11	Liquid level responsive	CPCONLY	Y10T137/2577		115
Y10T137/2579	11	Flow rate responsive	CPCONLY	Y10T137/2579		170
Y10T137/2582	12	Including controlling main line flow	CPCONLY	Y10T137/2582		65
Y10T137/2584	13	Relief or bypass closes as main opens	CPCONLY	Y10T137/2584		59
Y10T137/2587	12	Bypass or relief valve biased open	CPCONLY	Y10T137/2587		120
Y10T137/2589	12	Pilot valve operated	CPCONLY	Y10T137/2589		63
Y10T137/2592	12	Carried choke	CPCONLY	Y10T137/2592		43
Y10T137/2594	12	Choke	CPCONLY	Y10T137/2594		73
Y10T137/2597	13	Variable choke resistance	CPCONLY	Y10T137/2597		75
Y10T137/2599	12	Venturi	CPCONLY	Y10T137/2599		53
Y10T137/2602	12	Flapper	CPCONLY	Y10T137/2602		22
Y10T137/2605	11	Pressure responsive	CPCONLY	Y10T137/2605		384
Y10T137/2607	12	With pressure reducing inlet valve	CPCONLY	Y10T137/2607		270
Y10T137/261	13	Relief port through common sensing means	CPCONLY	Y10T137/261		313
Y10T137/2612	12	Common sensor for both bypass or relief valve and other branch valve	CPCONLY	Y10T137/2612		108
Y10T137/2615	13	Bypass or relief valve opens as other branch valve closes	CPCONLY	Y10T137/2615		119
Y10T137/2617	12	Bypass or relief valve biased open	CPCONLY	Y10T137/2617		283
Y10T137/262	13	Increasing pressure progressively closes then reopens by-pass or relief valve	CPCONLY	Y10T137/262		37
Y10T137/2622	12	Bypass or relief valve responsive to pressure downstream of outlet valve	CPCONLY	Y10T137/2622		124
Y10T137/2625	13	Pilot valve	CPCONLY	Y10T137/2625		97
Y10T137/2627	13	Outlet valve carried by bypass or relief valve	CPCONLY	Y10T137/2627		23
Y10T137/263	12	Plural sensors for single bypass or relief valve	CPCONLY	Y10T137/263		63
Y10T137/2632	13	Sensors interconnected by timing or restrictive orifice	CPCONLY	Y10T137/2632		16
Y10T137/2635	12	Pilot valve operated	CPCONLY	Y10T137/2635		87
Y10T137/2637	12	Mechanical movement between sensor and valve	CPCONLY	Y10T137/2637		40
Y10T137/264	12	Electrical control	CPCONLY	Y10T137/264		73
Y10T137/2642	12	Sensor rigid with valve	CPCONLY	Y10T137/2642		92
Y10T137/2645	13	Flexible sensor	CPCONLY	Y10T137/2645		29
Y10T137/2647	13	Pressure responsive outlet valve	CPCONLY	Y10T137/2647		19
Y10T137/265	10	Plural outflows	CPCONLY	Y10T137/265		101
Y10T137/2652	11	Single actuator operates plural outlets simultaneously	CPCONLY	Y10T137/2652		69
Y10T137/2655	11	Biased open isolation valve	CPCONLY	Y10T137/2655		63
Y10T137/2657	11	Flow rate responsive	CPCONLY	Y10T137/2657		93
Y10T137/266	12	Primer valve	CPCONLY	Y10T137/266		42
Y10T137/2663	11	Pressure responsive	CPCONLY	Y10T137/2663		218
Y10T137/2665	12	With external control for correlating valve [e.g., manual]	CPCONLY	Y10T137/2665		50
Y10T137/2668	11	Alternately or successively substituted outflow	CPCONLY	Y10T137/2668		92
Y10T137/267	12	Control by filling auxiliary gravitating or float operating tank	CPCONLY	Y10T137/267		122
Y10T137/2673	12	Control by filling outlet tank or receiver	CPCONLY	Y10T137/2673		62
Y10T137/2675	13	Float controlled	CPCONLY	Y10T137/2675		140
Y10T137/2678	12	Four port reversing valve	CPCONLY	Y10T137/2678		22
Y10T137/268	12	Responsive to pressure or flow interruption	CPCONLY	Y10T137/268		97
Y10T137/2683	13	Plural outlets control with automatic reset	CPCONLY	Y10T137/2683		59
Y10T137/2685	13	Manually set to a single outflow position	CPCONLY	Y10T137/2685		47
Y10T137/2688	12	Flow rate responsive	CPCONLY	Y10T137/2688		71
Y10T137/269	13	Flow sensing turbine	CPCONLY	Y10T137/269		49
Y10T137/2693	12	Pressure responsive	CPCONLY	Y10T137/2693		97
Y10T137/2695	13	Responsive to outlet pressure	CPCONLY	Y10T137/2695		31
Y10T137/2698	12	Electrical control	CPCONLY	Y10T137/2698		32
Y10T137/27	9	Liquid level responsive	CPCONLY	Y10T137/27		72
Y10T137/2703	9	Flow rate responsive	CPCONLY	Y10T137/2703		294
Y10T137/2705	10	Pressure differential	CPCONLY	Y10T137/2705		131
Y10T137/2708	9	Plural sensors	CPCONLY	Y10T137/2708		26
Y10T137/271	10	For single valve	CPCONLY	Y10T137/271		24
Y10T137/2713	8	Siphons	CPCONLY	Y10T137/2713		69
Y10T137/272	9	Plural	CPCONLY	Y10T137/272		106
Y10T137/2727	10	Tank truck mounted	CPCONLY	Y10T137/2727		17
Y10T137/2733	10	Sequentially discharging in parallel	CPCONLY	Y10T137/2733		34
Y10T137/274	11	From plural tanks	CPCONLY	Y10T137/274		23
Y10T137/2747	10	Main siphon with auxiliary starting, stopping or resetting siphon	CPCONLY	Y10T137/2747		69
Y10T137/2754	11	Sinking or bucket-type float operated main siphon, float emptying auxiliary siphon	CPCONLY	Y10T137/2754		19
Y10T137/2761	9	With discharge-controlling receiver	CPCONLY	Y10T137/2761		38
Y10T137/2768	10	With float	CPCONLY	Y10T137/2768		42
Y10T137/2774	9	Periodic or accumulation responsive discharge	CPCONLY	Y10T137/2774		166
Y10T137/2781	10	With manual control	CPCONLY	Y10T137/2781		29
Y10T137/2788	10	Control by filling auxiliary tank	CPCONLY	Y10T137/2788		27
Y10T137/2795	10	Float-operated inlet to siphon	CPCONLY	Y10T137/2795		113
Y10T137/2802	10	Release of trapped air	CPCONLY	Y10T137/2802		32
Y10T137/2808	11	Through float-operated vent	CPCONLY	Y10T137/2808		37
Y10T137/2815	11	Through liquid trap seal	CPCONLY	Y10T137/2815		71
Y10T137/2822	12	Auxiliary liquid trap seal	CPCONLY	Y10T137/2822		125
Y10T137/2829	9	With strainer, filter, separator or sediment trap	CPCONLY	Y10T137/2829		144
Y10T137/2836	9	With recorder, register, signal, indicator or inspection window	CPCONLY	Y10T137/2836		63
Y10T137/2842	9	With flow starting, stopping or maintaining means	CPCONLY	Y10T137/2842		190
Y10T137/2849	10	Siphon venting or breaking	CPCONLY	Y10T137/2849		186
Y10T137/2856	10	With leakage or entrained air removal	CPCONLY	Y10T137/2856		41
Y10T137/2863	10	Pressure applied to liquid in supply chamber	CPCONLY	Y10T137/2863		167
Y10T137/287	10	Plunge or immersion starting	CPCONLY	Y10T137/287		41
Y10T137/2877	10	Pump or liquid displacement device for flow passage	CPCONLY	Y10T137/2877		150
Y10T137/2883	11	Piston	CPCONLY	Y10T137/2883		61
Y10T137/289	12	Co-axial within flow passage	CPCONLY	Y10T137/289		71
Y10T137/2897	11	Collapsible bulb	CPCONLY	Y10T137/2897		106
Y10T137/2904	10	Siphon inlet movable to and from seat	CPCONLY	Y10T137/2904		22
Y10T137/2911	10	With valve or closure in-flow passage	CPCONLY	Y10T137/2911		222
Y10T137/2917	9	With means for mounting and/or positioning relative to siphon chamber	CPCONLY	Y10T137/2917		234
Y10T137/2924	9	Elements	CPCONLY	Y10T137/2924		72
Y10T137/2931	8	Diverse fluid containing pressure systems	CPCONLY	Y10T137/2931		276
Y10T137/2934	9	Gas lift valves for wells	CPCONLY	Y10T137/2934		352
Y10T137/2937	9	Gas pressure discharge of liquids feed traps [e.g., to boiler]	CPCONLY	Y10T137/2937		39
Y10T137/294	10	Gas pressure controlled by amount of liquids in boiler or discharge receiver	CPCONLY	Y10T137/294		31
Y10T137/2943	11	Pressure connection at liquid level in boiler or discharge receiver	CPCONLY	Y10T137/2943		43
Y10T137/2947	10	Gas pressure controlled by amount of liquid in trap	CPCONLY	Y10T137/2947		22
Y10T137/295	11	Plural trap chambers	CPCONLY	Y10T137/295		44
Y10T137/2953	12	Gravitating	CPCONLY	Y10T137/2953		41
Y10T137/2956	11	Gravitating vessel	CPCONLY	Y10T137/2956		23
Y10T137/2959	12	Sinking or bucket type float	CPCONLY	Y10T137/2959		28
Y10T137/2962	12	Pivoted vessel with fluid passage through pivot	CPCONLY	Y10T137/2962		69
Y10T137/2965	11	Float responsive	CPCONLY	Y10T137/2965		100
Y10T137/2968	12	Liquid control valve positively actuated	CPCONLY	Y10T137/2968		40
Y10T137/2971	12	Gas condensing type	CPCONLY	Y10T137/2971		26
Y10T137/2975	12	Gas inlet and outlet valves unitary	CPCONLY	Y10T137/2975		48
Y10T137/2978	10	Gas pressure controlled by manual or cyclic means	CPCONLY	Y10T137/2978		61
Y10T137/2981	11	Movable trap chamber	CPCONLY	Y10T137/2981		39
Y10T137/2984	9	Foam control in gas charged liquids	CPCONLY	Y10T137/2984		69
Y10T137/2987	10	Level or pressure responsive	CPCONLY	Y10T137/2987		57
Y10T137/299	10	Separate handling of foam	CPCONLY	Y10T137/299		25
Y10T137/2993	10	With conditioning trap or chamber	CPCONLY	Y10T137/2993		53
Y10T137/2996	11	Recarbonation	CPCONLY	Y10T137/2996		20
Y10T137/30	11	With trap or chamber by-pass	CPCONLY	Y10T137/30		19
Y10T137/3003	9	Fluid separating traps or vents	CPCONLY	Y10T137/3003		221
Y10T137/3006	10	Liquids separated from liquid	CPCONLY	Y10T137/3006		223
Y10T137/3009	10	Plural discriminating outlets for diverse fluids	CPCONLY	Y10T137/3009		89
Y10T137/3012	11	Common actuator for control valves	CPCONLY	Y10T137/3012		78
Y10T137/3015	11	Choke or restricted passage gas bleed	CPCONLY	Y10T137/3015		23
Y10T137/3018	12	From above liquid level	CPCONLY	Y10T137/3018		129
Y10T137/3021	10	Discriminating outlet for liquid	CPCONLY	Y10T137/3021		106
Y10T137/3024	11	With alternately operated inlet and outlet valves	CPCONLY	Y10T137/3024		29
Y10T137/3028	11	With non-discriminating gas vent or liquid discharge	CPCONLY	Y10T137/3028		76
Y10T137/3031	12	Abnormal pressure responsive liquid blow-off or drain	CPCONLY	Y10T137/3031		27
Y10T137/3034	12	Manual control	CPCONLY	Y10T137/3034		88
Y10T137/3037	11	With auxiliary inlet or by-pass valve	CPCONLY	Y10T137/3037		47
Y10T137/304	11	With fluid responsive valve	CPCONLY	Y10T137/304		127
Y10T137/3043	12	Successively opened valves	CPCONLY	Y10T137/3043		24
Y10T137/3046	12	Gas collecting float [e.g., inverted bucket]	CPCONLY	Y10T137/3046		76
Y10T137/3049	13	Downstream from valve	CPCONLY	Y10T137/3049		21
Y10T137/3052	12	Level responsive	CPCONLY	Y10T137/3052		55
Y10T137/3056	13	Weight or pressure	CPCONLY	Y10T137/3056		70
Y10T137/3059	14	Gravitating vessel	CPCONLY	Y10T137/3059		81
Y10T137/3062	15	Sinking or bucket type float	CPCONLY	Y10T137/3062		126
Y10T137/3065	16	Servo-control	CPCONLY	Y10T137/3065		27
Y10T137/3068	13	Float	CPCONLY	Y10T137/3068		368
Y10T137/3071	14	With main line gas outlet from trap chamber	CPCONLY	Y10T137/3071		65
Y10T137/3074	14	With outlet extending above liquid in trap	CPCONLY	Y10T137/3074		67
Y10T137/3077	14	Servo-control	CPCONLY	Y10T137/3077		122
Y10T137/308	14	With pressure balanced outlet valve	CPCONLY	Y10T137/308		62
Y10T137/3084	10	Discriminating outlet for gas	CPCONLY	Y10T137/3084		233
Y10T137/3087	11	With reverse flow stop or pressure regulating valve	CPCONLY	Y10T137/3087		127
Y10T137/309	11	Fluid sensing valve	CPCONLY	Y10T137/309		157
Y10T137/3093	12	With vaporized liquid stop	CPCONLY	Y10T137/3093		68
Y10T137/3096	13	With separate return for condensate	CPCONLY	Y10T137/3096		64
Y10T137/3099	12	Float responsive	CPCONLY	Y10T137/3099		1055
Y10T137/3102	10	With liquid emptying means	CPCONLY	Y10T137/3102		128
Y10T137/3105	11	Self-emptying	CPCONLY	Y10T137/3105		286
Y10T137/3109	9	Liquid filling by evacuating container	CPCONLY	Y10T137/3109		493
Y10T137/3112	9	Main line flow displaces additive from shunt reservoir	CPCONLY	Y10T137/3112		151
Y10T137/3115	9	Gas pressure storage over or displacement of liquid	CPCONLY	Y10T137/3115		294
Y10T137/3118	10	Surge suppression	CPCONLY	Y10T137/3118		180
Y10T137/3121	10	With return of liquid to supply	CPCONLY	Y10T137/3121		70
Y10T137/3124	10	Plural units	CPCONLY	Y10T137/3124		164
Y10T137/3127	10	With gas maintenance or application	CPCONLY	Y10T137/3127		988
Y10T137/313	11	Gas carried by or evolved from liquid	CPCONLY	Y10T137/313		208
Y10T137/3133	12	Gas injectors	CPCONLY	Y10T137/3133		144
Y10T137/3137	11	Gas injected by liquid pressure or flow	CPCONLY	Y10T137/3137		85
Y10T137/314	11	Unitary mounting for gas pressure inlet and liquid outlet	CPCONLY	Y10T137/314		324
Y10T137/3143	10	With liquid level responsive gas vent or whistle	CPCONLY	Y10T137/3143		241
Y10T137/3146	11	Combined high and low level responsive	CPCONLY	Y10T137/3146		96
Y10T137/3149	8	Back flow prevention by vacuum breaking [e.g., anti-siphon devices]	CPCONLY	Y10T137/3149		101
Y10T137/3185	9	Air vent in liquid flow line	CPCONLY	Y10T137/3185		269
Y10T137/3222	10	With liquid seal in liquid flow line	CPCONLY	Y10T137/3222		155
Y10T137/3258	11	Automatic valve in vent line	CPCONLY	Y10T137/3258		67
Y10T137/3294	10	Valved	CPCONLY	Y10T137/3294		246
Y10T137/3331	11	With co-acting valve in liquid flow path	CPCONLY	Y10T137/3331		516
Y10T137/3367	8	Larner-Johnson type valves; i.e., telescoping internal valve in expanded flow line section	CPCONLY	Y10T137/3367		275
Y10T137/3421	9	Line condition change responsive	CPCONLY	Y10T137/3421		186
Y10T137/3476	9	Internal servo-motor with internal pilot valve	CPCONLY	Y10T137/3476		49
Y10T137/353	10	Pilot controlled passage in nose or needle	CPCONLY	Y10T137/353		45
Y10T137/3584	8	Inflatable article [e.g., tire filling chuck and/or stem]	CPCONLY	Y10T137/3584		963
Y10T137/36	9	With pressure-responsive pressure-control means	CPCONLY	Y10T137/36		367
Y10T137/3615	10	Pulsating	CPCONLY	Y10T137/3615		56
Y10T137/3631	10	Diaphragm, bellows or expansible tube	CPCONLY	Y10T137/3631		145
Y10T137/3646	10	Co-axial inflation and relief valves	CPCONLY	Y10T137/3646		165
Y10T137/3662	9	With gauge or indicator	CPCONLY	Y10T137/3662		406
Y10T137/3677	10	With deflating means	CPCONLY	Y10T137/3677		90
Y10T137/3693	10	Selectively connected	CPCONLY	Y10T137/3693		96
Y10T137/3709	9	Stem attached relief valve	CPCONLY	Y10T137/3709		66
Y10T137/3724	9	With coupling means	CPCONLY	Y10T137/3724		334
Y10T137/374	9	With cap	CPCONLY	Y10T137/374		281
Y10T137/3755	10	Valve actuating, assembling or locking means on cap	CPCONLY	Y10T137/3755		133
Y10T137/3771	11	Valve manually seated	CPCONLY	Y10T137/3771		117
Y10T137/3786	9	Removable valve head and seat unit [valve insides]	CPCONLY	Y10T137/3786		151
Y10T137/3802	8	With vehicle guide or support, e.g., service station	CPCONLY	Y10T137/3802		160
Y10T137/402	8	Distribution systems involving geographic features	CPCONLY	Y10T137/402		605
Y10T137/4238	8	With cleaner, lubrication added to fluid or liquid sealing at valve interface	CPCONLY	Y10T137/4238		160
Y10T137/4245	9	Cleaning or steam sterilizing	CPCONLY	Y10T137/4245		394
Y10T137/4252	10	Reverse fluid flow	CPCONLY	Y10T137/4252		146
Y10T137/4259	10	With separate material addition	CPCONLY	Y10T137/4259		937
Y10T137/4266	10	Steam sterilizing	CPCONLY	Y10T137/4266		86
Y10T137/4273	10	Mechanical cleaning	CPCONLY	Y10T137/4273		369
Y10T137/428	11	Valve grinding motion of valve on seat	CPCONLY	Y10T137/428		85
Y10T137/4287	12	Concentric stem	CPCONLY	Y10T137/4287		43
Y10T137/4294	12	Spring pressed	CPCONLY	Y10T137/4294		67
Y10T137/4301	12	Lost motion permits grinding	CPCONLY	Y10T137/4301		45
Y10T137/4308	12	With swivel-preventing means	CPCONLY	Y10T137/4308		14
Y10T137/4315	12	Nut releasable from body and/or stem	CPCONLY	Y10T137/4315		41
Y10T137/4322	12	With independent grinding actuator	CPCONLY	Y10T137/4322		39
Y10T137/4329	13	Separable	CPCONLY	Y10T137/4329		34
Y10T137/4336	11	Cleaning member reciprocates in passage	CPCONLY	Y10T137/4336		258
Y10T137/4343	12	By-pass cleaning	CPCONLY	Y10T137/4343		47
Y10T137/4351	12	Independent actuation	CPCONLY	Y10T137/4351		59
Y10T137/4358	9	Liquid supplied at valve interface	CPCONLY	Y10T137/4358		137
Y10T137/4365	10	Plural feed	CPCONLY	Y10T137/4365		77
Y10T137/4372	10	Line pressure feed	CPCONLY	Y10T137/4372		116
Y10T137/4379	10	Feed by or with actuation	CPCONLY	Y10T137/4379		87
Y10T137/4386	10	Loss control	CPCONLY	Y10T137/4386		59
Y10T137/4393	10	Screw feed	CPCONLY	Y10T137/4393		50
Y10T137/44	11	With check valve	CPCONLY	Y10T137/44		46
Y10T137/4407	12	Excess relief	CPCONLY	Y10T137/4407		20
Y10T137/4414	12	Jacking	CPCONLY	Y10T137/4414		58
Y10T137/4421	11	Jacking	CPCONLY	Y10T137/4421		51
Y10T137/4428	11	Seating	CPCONLY	Y10T137/4428		18
Y10T137/4435	10	Spring biased piston feed	CPCONLY	Y10T137/4435		34
Y10T137/4442	10	External pressure	CPCONLY	Y10T137/4442		240
Y10T137/4449	10	Gravity or capillary feed	CPCONLY	Y10T137/4449		67
Y10T137/4456	8	With liquid valves or liquid trap seals	CPCONLY	Y10T137/4456		123
Y10T137/4463	9	Liquid seal in liquid flow line; flow liquid forms seal	CPCONLY	Y10T137/4463		103
Y10T137/4471	10	Valves	CPCONLY	Y10T137/4471		75
Y10T137/4478	11	Line condition change responsive	CPCONLY	Y10T137/4478		53
Y10T137/4486	12	Plural valves or valve seats	CPCONLY	Y10T137/4486		55
Y10T137/4493	12	Pivoted valve	CPCONLY	Y10T137/4493		97
Y10T137/4501	12	Ball valve	CPCONLY	Y10T137/4501		63
Y10T137/4508	13	Seats vertically up	CPCONLY	Y10T137/4508		43
Y10T137/4516	10	Seal replenishers	CPCONLY	Y10T137/4516		95
Y10T137/4523	10	Plural inlet	CPCONLY	Y10T137/4523		134
Y10T137/4531	10	Divided and recombined passages	CPCONLY	Y10T137/4531		81
Y10T137/4538	10	Tangential inlet flow	CPCONLY	Y10T137/4538		28
Y10T137/4546	10	Downward partition encircles projecting outlet	CPCONLY	Y10T137/4546		96
Y10T137/4553	10	Submerged inlet pipe end	CPCONLY	Y10T137/4553		132
Y10T137/4561	11	Hinged seal bowl	CPCONLY	Y10T137/4561		27
Y10T137/4568	11	Distinct seal bowl in flow line connected casing	CPCONLY	Y10T137/4568		70
Y10T137/4576	10	U-seals	CPCONLY	Y10T137/4576		97
Y10T137/4583	11	Topside access beneath cover plate closed floor opening	CPCONLY	Y10T137/4583		35
Y10T137/4591	11	Enlarged upflow leg	CPCONLY	Y10T137/4591		66
Y10T137/4598	12	Topside access opening	CPCONLY	Y10T137/4598		45
Y10T137/4606	11	Even diameter legs	CPCONLY	Y10T137/4606		69
Y10T137/4613	12	Access opening	CPCONLY	Y10T137/4613		97
Y10T137/4621	9	Seal for relatively movable valving parts	CPCONLY	Y10T137/4621		253
Y10T137/4628	10	Horizontally moving valve	CPCONLY	Y10T137/4628		25
Y10T137/4636	11	Rotary	CPCONLY	Y10T137/4636		39
Y10T137/4643	9	Liquid valves	CPCONLY	Y10T137/4643		410
Y10T137/4651	10	Branched passage for sealing liquid	CPCONLY	Y10T137/4651		48
Y10T137/4658	10	With auxiliary means for varying liquid level	CPCONLY	Y10T137/4658		89
Y10T137/4666	10	With baffle	CPCONLY	Y10T137/4666		80
Y10T137/4673	8	Plural tanks or compartments with parallel flow	CPCONLY	Y10T137/4673		305
Y10T137/469	9	Sequentially filled and emptied [e.g., holding type]	CPCONLY	Y10T137/469		156
Y10T137/4707	10	With relative rotation of tank group and filling head	CPCONLY	Y10T137/4707		44
Y10T137/4723	11	With rotary filling and emptying head	CPCONLY	Y10T137/4723		19
Y10T137/474	9	With housings, supports or stacking arrangements	CPCONLY	Y10T137/474		118
Y10T137/4757	9	Battery or electrolytic cell replenishment	CPCONLY	Y10T137/4757		90
Y10T137/4774	10	Barometric supply	CPCONLY	Y10T137/4774		36
Y10T137/479	9	Flow dividing compartments	CPCONLY	Y10T137/479		142
Y10T137/4807	9	Tank type manifold [i.e., one tank supplies or receives from at least two others]	CPCONLY	Y10T137/4807		261
Y10T137/4824	9	Tank within tank	CPCONLY	Y10T137/4824		140
Y10T137/4841	9	With cross connecting passage	CPCONLY	Y10T137/4841		141
Y10T137/4857	9	With manifold or grouped outlets	CPCONLY	Y10T137/4857		376
Y10T137/4874	10	Tank truck type	CPCONLY	Y10T137/4874		114
Y10T137/4891	8	With holder for solid, flaky or pulverized material to be dissolved or entrained	CPCONLY	Y10T137/4891		916
Y10T137/5109	8	Convertible	CPCONLY	Y10T137/5109		676
Y10T137/5153	9	Reversible check	CPCONLY	Y10T137/5153		103
Y10T137/5196	9	Unit orientable in a single location between plural positions	CPCONLY	Y10T137/5196		500
Y10T137/524	10	Reversible stop and vent or waste	CPCONLY	Y10T137/524		58
Y10T137/5283	9	Units interchangeable between alternate locations	CPCONLY	Y10T137/5283		470
Y10T137/5327	8	Hydrant type	CPCONLY	Y10T137/5327		103
Y10T137/5333	9	Water crane type	CPCONLY	Y10T137/5333		10
Y10T137/5339	10	Spout operated valve	CPCONLY	Y10T137/5339		6
Y10T137/5345	10	Rotating riser	CPCONLY	Y10T137/5345		24
Y10T137/535	11	Spout articulated to riser	CPCONLY	Y10T137/535		17
Y10T137/5356	11	Vertically movable riser	CPCONLY	Y10T137/5356		20
Y10T137/5362	10	Extensible spout	CPCONLY	Y10T137/5362		17
Y10T137/5368	10	Spout articulated to riser	CPCONLY	Y10T137/5368		28
Y10T137/5374	9	Plural riser	CPCONLY	Y10T137/5374		33
Y10T137/538	9	Expansible chamber operated by valve actuator for draining riser	CPCONLY	Y10T137/538		83
Y10T137/5386	9	With pump or ejector	CPCONLY	Y10T137/5386		38
Y10T137/5392	9	Removable valve and valve seat	CPCONLY	Y10T137/5392		54
Y10T137/5397	10	With extension to facilitate removal	CPCONLY	Y10T137/5397		22
Y10T137/5403	9	Removable valve with supplemental check valve	CPCONLY	Y10T137/5403		38
Y10T137/5409	9	Movable riser actuated valve	CPCONLY	Y10T137/5409		48
Y10T137/5415	10	Reciprocating riser	CPCONLY	Y10T137/5415		92
Y10T137/5421	11	Piston type valve	CPCONLY	Y10T137/5421		27
Y10T137/5427	9	Balanced valve	CPCONLY	Y10T137/5427		23
Y10T137/5433	9	Valve actuator extends laterally from bottom of riser	CPCONLY	Y10T137/5433		26
Y10T137/5438	9	Valve actuator outside riser	CPCONLY	Y10T137/5438		85
Y10T137/5444	10	Lever actuator	CPCONLY	Y10T137/5444		46
Y10T137/545	10	With casing, flush with ground or pavement surface	CPCONLY	Y10T137/545		24
Y10T137/5456	9	With casing	CPCONLY	Y10T137/5456		117
Y10T137/5462	10	Flush with ground or pavement surface	CPCONLY	Y10T137/5462		48
Y10T137/5468	10	Cap, cover or hood	CPCONLY	Y10T137/5468		155
Y10T137/5474	10	With heater	CPCONLY	Y10T137/5474		30
Y10T137/5479	9	With actuator lubricating means	CPCONLY	Y10T137/5479		18
Y10T137/5485	9	With valve at outlet	CPCONLY	Y10T137/5485		85
Y10T137/5491	9	With supplemental valve	CPCONLY	Y10T137/5491		50
Y10T137/5497	9	Protection against freezing	CPCONLY	Y10T137/5497		168
Y10T137/5503	10	Stop and waste	CPCONLY	Y10T137/5503		107
Y10T137/5509	11	With disabling means	CPCONLY	Y10T137/5509		13
Y10T137/5515	11	Separate relatively movable valves with single actuator	CPCONLY	Y10T137/5515		46
Y10T137/5521	12	Unidirectional abutting connection between main valve or actuator and waste valve	CPCONLY	Y10T137/5521		82
Y10T137/5526	12	With screw or gear in actuating mechanism	CPCONLY	Y10T137/5526		28
Y10T137/5532	11	Reciprocating relatively fixed valves	CPCONLY	Y10T137/5532		124
Y10T137/5538	12	Waste through lower valve guide	CPCONLY	Y10T137/5538		40
Y10T137/5544	8	Reversing valves - regenerative furnace type	CPCONLY	Y10T137/5544		134
Y10T137/5617	9	With cooling	CPCONLY	Y10T137/5617		53
Y10T137/5689	9	Rotary reversing valve	CPCONLY	Y10T137/5689		89
Y10T137/5762	8	With leakage or drip collecting	CPCONLY	Y10T137/5762		1288
Y10T137/5835	9	Relatively movable receptacle or drain pipe and outlet	CPCONLY	Y10T137/5835		68
Y10T137/5907	9	Collector for waste liquid derived from solid, gas or vapor	CPCONLY	Y10T137/5907		100
Y10T137/598	8	With repair, tapping, assembly, or disassembly means	CPCONLY	Y10T137/598		500
Y10T137/5983	9	Blow out preventer or choke valve device [e.g., oil well flow controlling device, etc.]	CPCONLY	Y10T137/5983		55
Y10T137/5987	9	Solenoid or  electromagnetically operated valve	CPCONLY	Y10T137/5987		135
Y10T137/599	9	Pressure regulating type valve	CPCONLY	Y10T137/599		98
Y10T137/5994	10	Diaphragm type	CPCONLY	Y10T137/5994		62
Y10T137/5997	9	Gas or water meter replacing	CPCONLY	Y10T137/5997		49
Y10T137/60	9	Assembling or disassembling flexible tube or sleeve type valve	CPCONLY	Y10T137/60		56
Y10T137/6004	9	Assembling or disassembling float or float valve	CPCONLY	Y10T137/6004		51
Y10T137/6007	9	Assembling or disassembling multi way valve	CPCONLY	Y10T137/6007		68
Y10T137/6011	9	Assembling, disassembling, or removing cartridge type valve [e.g., insertable and removable as a unit, etc.]	CPCONLY	Y10T137/6011		114
Y10T137/6014	10	Faucet type [e.g., domestic water use, etc.]	CPCONLY	Y10T137/6014		105
Y10T137/6017	11	Including removable valve head and seat unit	CPCONLY	Y10T137/6017		53
Y10T137/6021	11	Including mechanical movement actuator	CPCONLY	Y10T137/6021		16
Y10T137/6024	11	Particular handle or handle fastening means	CPCONLY	Y10T137/6024		62
Y10T137/6028	9	Assembling or disassembling pivoted valve	CPCONLY	Y10T137/6028		51
Y10T137/6031	9	Assembling or disassembling rotary valve	CPCONLY	Y10T137/6031		48
Y10T137/6035	10	Rotary ball valve	CPCONLY	Y10T137/6035		71
Y10T137/6038	11	Particular valve seat or interface seal	CPCONLY	Y10T137/6038		59
Y10T137/6041	12	Replaceable	CPCONLY	Y10T137/6041		40
Y10T137/6045	13	With top entry valve	CPCONLY	Y10T137/6045		39
Y10T137/6048	10	Butterfly valve	CPCONLY	Y10T137/6048		42
Y10T137/6052	11	Having valve head or seat packing	CPCONLY	Y10T137/6052		23
Y10T137/6055	11	With head and stem collections	CPCONLY	Y10T137/6055		23
Y10T137/6058	10	Plug valve	CPCONLY	Y10T137/6058		71
Y10T137/6062	11	Having retainer at actuator end	CPCONLY	Y10T137/6062		18
Y10T137/6065	9	Assembling or disassembling reciprocating valve	CPCONLY	Y10T137/6065		158
Y10T137/6069	10	Having particularly packed or sealed mechanical movement actuator	CPCONLY	Y10T137/6069		65
Y10T137/6072	10	Gate valve	CPCONLY	Y10T137/6072		56
Y10T137/6075	11	Bifaced	CPCONLY	Y10T137/6075		35
Y10T137/6079	11	Having particular valve seat	CPCONLY	Y10T137/6079		26
Y10T137/6082	12	Including seal	CPCONLY	Y10T137/6082		11
Y10T137/6086	9	Assembling or disassembling check valve	CPCONLY	Y10T137/6086		116
Y10T137/6089	9	With mechanical movement between actuator and valve	CPCONLY	Y10T137/6089		75
Y10T137/6092	10	Plural motions of valve	CPCONLY	Y10T137/6092		43
Y10T137/6096	10	Lever type	CPCONLY	Y10T137/6096		31
Y10T137/6099	10	Gear type	CPCONLY	Y10T137/6099		25
Y10T137/6103	10	Cam type	CPCONLY	Y10T137/6103		30
Y10T137/6106	10	Screw type	CPCONLY	Y10T137/6106		58
Y10T137/6109	9	Tool for applying or removing valve or valve member	CPCONLY	Y10T137/6109		138
Y10T137/6113	10	Including sealing feature	CPCONLY	Y10T137/6113		23
Y10T137/6116	9	With holding means functioning only during transportation assembly or disassembly	CPCONLY	Y10T137/6116		157
Y10T137/612	9	Tapping a pipe, keg, or apertured tank under pressure	CPCONLY	Y10T137/612		239
Y10T137/6123	10	With aperture forming means	CPCONLY	Y10T137/6123		760
Y10T137/6126	10	Imperforate closure removing and holding tap	CPCONLY	Y10T137/6126		49
Y10T137/613	10	With valved closure or bung	CPCONLY	Y10T137/613		101
Y10T137/6133	11	Combined rotary and longitudinal movement of valve	CPCONLY	Y10T137/6133		96
Y10T137/6137	11	Longitudinal movement of valve	CPCONLY	Y10T137/6137		285
Y10T137/614	11	Rotary movement of valve	CPCONLY	Y10T137/614		75
Y10T137/6144	10	With core ejectors	CPCONLY	Y10T137/6144		32
Y10T137/6147	11	Impact operated	CPCONLY	Y10T137/6147		45
Y10T137/615	9	Foot valve extraction from top of enclosure	CPCONLY	Y10T137/615		41
Y10T137/6154	9	With disassembly tool engaging feature	CPCONLY	Y10T137/6154		219
Y10T137/6157	10	Wrench engaging lugs	CPCONLY	Y10T137/6157		78
Y10T137/6161	9	With provision of alternate wear parts	CPCONLY	Y10T137/6161		52
Y10T137/6164	10	Valve heads and/or seats	CPCONLY	Y10T137/6164		65
Y10T137/6167	11	Opposite duplicate surfaces of unitary structure	CPCONLY	Y10T137/6167		59
Y10T137/6171	12	Homogeneous material	CPCONLY	Y10T137/6171		62
Y10T137/6174	13	Valve heads	CPCONLY	Y10T137/6174		84
Y10T137/6178	11	Different portions of continuous surfaces	CPCONLY	Y10T137/6178		50
Y10T137/6181	11	Successively used adjacent independent elements	CPCONLY	Y10T137/6181		47
Y10T137/6184	9	Removable valve with normally disabled supplemental check valve	CPCONLY	Y10T137/6184		67
Y10T137/6188	10	Check valve disabled by normally movable main valve part	CPCONLY	Y10T137/6188		58
Y10T137/6191	11	Ball check	CPCONLY	Y10T137/6191		39
Y10T137/6195	11	Spring bias	CPCONLY	Y10T137/6195		59
Y10T137/6198	8	Non-valving motion of the valve or valve seat	CPCONLY	Y10T137/6198		122
Y10T137/6253	9	Rotary motion of a reciprocating valve	CPCONLY	Y10T137/6253		195
Y10T137/6307	10	Turbine on valve	CPCONLY	Y10T137/6307		178
Y10T137/6362	10	Manual rotating means	CPCONLY	Y10T137/6362		26
Y10T137/6416	8	With heating or cooling of the system	CPCONLY	Y10T137/6416		725
Y10T137/6443	9	With burner	CPCONLY	Y10T137/6443		127
Y10T137/647	10	Flue extending through fluid	CPCONLY	Y10T137/647		21
Y10T137/6497	9	Hot and cold water system having a connection from the hot to the cold channel	CPCONLY	Y10T137/6497		217
Y10T137/6525	9	Air heated or cooled [fan, fins, or channels]	CPCONLY	Y10T137/6525		243
Y10T137/6552	9	With diversion of part of fluid to heat or cool the device or its contents	CPCONLY	Y10T137/6552		166
Y10T137/6579	9	Circulating fluid in heat exchange relationship	CPCONLY	Y10T137/6579		1083
Y10T137/6606	9	With electric heating element	CPCONLY	Y10T137/6606		644
Y10T137/6633	8	With fluid system support for workman or non-system material	CPCONLY	Y10T137/6633		92
Y10T137/6851	8	With casing, support, protector or static constructional installations	CPCONLY	Y10T137/6851		471
Y10T137/6855	9	Vehicle	CPCONLY	Y10T137/6855		374
Y10T137/6858	10	Locomotive	CPCONLY	Y10T137/6858		56
Y10T137/6862	11	Boiler or steam dome	CPCONLY	Y10T137/6862		63
Y10T137/6866	10	Railway car	CPCONLY	Y10T137/6866		143
Y10T137/6869	11	Car frame	CPCONLY	Y10T137/6869		28
Y10T137/6873	11	End of car	CPCONLY	Y10T137/6873		245
Y10T137/6877	11	Roof, wall or floor	CPCONLY	Y10T137/6877		63
Y10T137/6881	10	Automotive	CPCONLY	Y10T137/6881		449
Y10T137/6884	11	Steering post or wheel	CPCONLY	Y10T137/6884		25
Y10T137/6888	11	Dash	CPCONLY	Y10T137/6888		101
Y10T137/6892	11	Floor or frame	CPCONLY	Y10T137/6892		113
Y10T137/6895	11	Fender or running board	CPCONLY	Y10T137/6895		32
Y10T137/6899	10	With hose reel storage means	CPCONLY	Y10T137/6899		161
Y10T137/6903	10	Guided by means of track or guideway	CPCONLY	Y10T137/6903		38
Y10T137/6906	10	Aerial or water-supported [e.g., airplane or ship, etc.]	CPCONLY	Y10T137/6906		178
Y10T137/691	10	With retractable or nonuse-positionable support wheel	CPCONLY	Y10T137/691		18
Y10T137/6914	10	Vehicle supports fluid compressor and compressed fluid storage tank	CPCONLY	Y10T137/6914		80
Y10T137/6918	9	With hose storage or retrieval means	CPCONLY	Y10T137/6918		244
Y10T137/6921	10	With means for plural hoses	CPCONLY	Y10T137/6921		165
Y10T137/6925	10	With flow regulation responsive to hose movement	CPCONLY	Y10T137/6925		75
Y10T137/6929	11	Reel type	CPCONLY	Y10T137/6929		87
Y10T137/6932	10	With retrieval means	CPCONLY	Y10T137/6932		148
Y10T137/6936	11	Power stop or brake	CPCONLY	Y10T137/6936		50
Y10T137/694	12	Responsive to position of hose in casing	CPCONLY	Y10T137/694		30
Y10T137/6943	11	Biased to retracted position	CPCONLY	Y10T137/6943		125
Y10T137/6947	12	Boom type	CPCONLY	Y10T137/6947		41
Y10T137/6951	12	Weighted	CPCONLY	Y10T137/6951		82
Y10T137/6954	10	Reel with support therefor	CPCONLY	Y10T137/6954		232
Y10T137/6958	11	Ground supported	CPCONLY	Y10T137/6958		117
Y10T137/6962	10	Basket or holder for folded coiled hose	CPCONLY	Y10T137/6962		91
Y10T137/6966	9	Static constructional installations	CPCONLY	Y10T137/6966		174
Y10T137/6969	10	Buildings	CPCONLY	Y10T137/6969		399
Y10T137/6973	11	Outside access to portions of the system	CPCONLY	Y10T137/6973		38
Y10T137/6977	11	Escutcheon type support	CPCONLY	Y10T137/6977		392
Y10T137/698	11	Wall	CPCONLY	Y10T137/698		724
Y10T137/6984	12	Recessed gas outlet box	CPCONLY	Y10T137/6984		18
Y10T137/6988	11	Floor installation	CPCONLY	Y10T137/6988		278
Y10T137/6991	10	Ground supporting enclosure	CPCONLY	Y10T137/6991		188
Y10T137/6995	11	Valve and meter wells	CPCONLY	Y10T137/6995		161
Y10T137/6999	12	With means to center well on valve	CPCONLY	Y10T137/6999		40
Y10T137/7002	13	Detachable base plate	CPCONLY	Y10T137/7002		34
Y10T137/7006	13	Vertical casing aligned by valve casing	CPCONLY	Y10T137/7006		43
Y10T137/701	12	Combined with actuator	CPCONLY	Y10T137/701		79
Y10T137/7014	13	Telescopic well casing	CPCONLY	Y10T137/7014		50
Y10T137/7017	12	Telescopic well casing	CPCONLY	Y10T137/7017		52
Y10T137/7021	12	Covers	CPCONLY	Y10T137/7021		191
Y10T137/7025	11	Pipe line transport	CPCONLY	Y10T137/7025		75
Y10T137/7028	10	Tapering or tower type	CPCONLY	Y10T137/7028		34
Y10T137/7032	9	Furniture and housing furnishings	CPCONLY	Y10T137/7032		90
Y10T137/7036	9	Jacketed	CPCONLY	Y10T137/7036		1055
Y10T137/7039	9	Tank supports	CPCONLY	Y10T137/7039		252
Y10T137/7043	9	Guards and shields	CPCONLY	Y10T137/7043		507
Y10T137/7047	10	Resilient abutment for preventing breakage	CPCONLY	Y10T137/7047		19
Y10T137/7051	10	Nozzle abutment for scratch or damage prevention	CPCONLY	Y10T137/7051		32
Y10T137/7054	10	Cover for beer cooler aperture for faucet	CPCONLY	Y10T137/7054		21
Y10T137/7058	10	Sanitary covers or shields	CPCONLY	Y10T137/7058		100
Y10T137/7062	10	Valve guards	CPCONLY	Y10T137/7062		881
Y10T137/7065	11	With means for accommodating a detachable actuator	CPCONLY	Y10T137/7065		111
Y10T137/7069	8	With lock or seal	CPCONLY	Y10T137/7069		365
Y10T137/71	9	With seal	CPCONLY	Y10T137/71		159
Y10T137/7131	9	Common lock and valve actuator	CPCONLY	Y10T137/7131		143
Y10T137/7162	10	Combination lock	CPCONLY	Y10T137/7162		41
Y10T137/7194	10	Biased valve	CPCONLY	Y10T137/7194		62
Y10T137/7225	10	Mechanical movement between lock and valve	CPCONLY	Y10T137/7225		57
Y10T137/7256	9	Locks against rotary motion	CPCONLY	Y10T137/7256		498
Y10T137/7287	8	Liquid level responsive or maintaining systems	CPCONLY	Y10T137/7287		515
Y10T137/729	9	Washing machine cycle control	CPCONLY	Y10T137/729		168
Y10T137/7293	9	Liquid excluding devices for gas inlet or outlets	CPCONLY	Y10T137/7293		56
Y10T137/7297	9	With second diverse control	CPCONLY	Y10T137/7297		276
Y10T137/73	10	Manual control	CPCONLY	Y10T137/73		270
Y10T137/7303	9	Control of both inflow and outflow of tank	CPCONLY	Y10T137/7303		447
Y10T137/7306	9	Electrical characteristic sensing	CPCONLY	Y10T137/7306		606
Y10T137/731	9	With control fluid connection at desired liquid level	CPCONLY	Y10T137/731		200
Y10T137/7313	9	Control of outflow from tank	CPCONLY	Y10T137/7313		198
Y10T137/7316	10	Self-emptying tanks	CPCONLY	Y10T137/7316		169
Y10T137/7319	11	By float	CPCONLY	Y10T137/7319		250
Y10T137/7323	10	By float	CPCONLY	Y10T137/7323		611
Y10T137/7326	11	Low level safety cut-off	CPCONLY	Y10T137/7326		236
Y10T137/7329	9	With supplemental or safety closing means or bias	CPCONLY	Y10T137/7329		152
Y10T137/7332	10	Sinking or bucket type float	CPCONLY	Y10T137/7332		21
Y10T137/7336	10	Gravitating tank	CPCONLY	Y10T137/7336		16
Y10T137/7339	9	By weight of accumulated fluid	CPCONLY	Y10T137/7339		299
Y10T137/7342	10	In sinking or bucket type float	CPCONLY	Y10T137/7342		79
Y10T137/7345	10	Oil burner fuel overflow preventing safety cut-offs	CPCONLY	Y10T137/7345		52
Y10T137/7349	10	In communicating measuring vessel	CPCONLY	Y10T137/7349		101
Y10T137/7352	11	Top and bottom connections	CPCONLY	Y10T137/7352		91
Y10T137/7355	10	In gravitating tank	CPCONLY	Y10T137/7355		383
Y10T137/7358	9	By float controlled valve	CPCONLY	Y10T137/7358		308
Y10T137/7361	10	Valve opened by external means, closing or closing control by float	CPCONLY	Y10T137/7361		226
Y10T137/7365	10	Single float controls plural valves	CPCONLY	Y10T137/7365		361
Y10T137/7368	10	Servo relay operation of control	CPCONLY	Y10T137/7368		287
Y10T137/7371	11	Fluid pressure	CPCONLY	Y10T137/7371		409
Y10T137/7374	12	Flexible diaphragm valve	CPCONLY	Y10T137/7374		321
Y10T137/7378	12	From tank	CPCONLY	Y10T137/7378		165
Y10T137/7381	10	Quick acting	CPCONLY	Y10T137/7381		132
Y10T137/7384	11	Pilot float released	CPCONLY	Y10T137/7384		69
Y10T137/7387	11	Over center mechanism	CPCONLY	Y10T137/7387		110
Y10T137/7391	12	Shifting weight	CPCONLY	Y10T137/7391		96
Y10T137/7394	11	Trip mechanism	CPCONLY	Y10T137/7394		79
Y10T137/7397	12	Weight or spring bias	CPCONLY	Y10T137/7397		193
Y10T137/74	11	Lost motion mechanism	CPCONLY	Y10T137/74		134
Y10T137/7404	10	Plural floats	CPCONLY	Y10T137/7404		326
Y10T137/7407	10	With counter-balance	CPCONLY	Y10T137/7407		91
Y10T137/741	11	Within tank	CPCONLY	Y10T137/741		171
Y10T137/7413	10	Level adjustment or selection means	CPCONLY	Y10T137/7413		568
Y10T137/7417	10	With float leakage disposal	CPCONLY	Y10T137/7417		31
Y10T137/742	10	In separate communicating float chamber	CPCONLY	Y10T137/742		493
Y10T137/7423	10	Rectilinearly traveling float	CPCONLY	Y10T137/7423		392
Y10T137/7426	11	Float co-axial with valve or port	CPCONLY	Y10T137/7426		254
Y10T137/743	12	Float is spreader or anti-splash means	CPCONLY	Y10T137/743		30
Y10T137/7433	12	Float surrounds inlet pipe	CPCONLY	Y10T137/7433		191
Y10T137/7436	12	Float rigid with valve	CPCONLY	Y10T137/7436		728
Y10T137/7439	10	Float arm operated valve	CPCONLY	Y10T137/7439		483
Y10T137/7442	11	With valve retarder or cushion means	CPCONLY	Y10T137/7442		79
Y10T137/7446	11	With flow guide or restrictor	CPCONLY	Y10T137/7446		231
Y10T137/7449	12	External hood or deflector or annular outlet surrounding the inlet pipe	CPCONLY	Y10T137/7449		187
Y10T137/7452	11	Movable nozzle or inlet terminal	CPCONLY	Y10T137/7452		38
Y10T137/7455	11	Valve removable from outside container	CPCONLY	Y10T137/7455		82
Y10T137/7459	11	With U-shaped inlet pipe having terminal valve	CPCONLY	Y10T137/7459		25
Y10T137/7462	11	With refill pipe	CPCONLY	Y10T137/7462		197
Y10T137/7465	11	Assembly mounted on and having reciprocating valve element coaxial with inlet pipe	CPCONLY	Y10T137/7465		116
Y10T137/7468	12	Horizontal or side entering pipe	CPCONLY	Y10T137/7468		154
Y10T137/7472	12	Vertical inlet riser	CPCONLY	Y10T137/7472		345
Y10T137/7475	11	With toggle or second lever connected to valve	CPCONLY	Y10T137/7475		551
Y10T137/7478	11	With interposed cam, gear or threaded connection	CPCONLY	Y10T137/7478		307
Y10T137/7481	11	Rotary valve element	CPCONLY	Y10T137/7481		173
Y10T137/7485	11	Pivoted valve	CPCONLY	Y10T137/7485		340
Y10T137/7488	11	Ball valves	CPCONLY	Y10T137/7488		141
Y10T137/7491	11	Balanced valves	CPCONLY	Y10T137/7491		98
Y10T137/7494	11	Flexible valve	CPCONLY	Y10T137/7494		146
Y10T137/7498	9	Barometric	CPCONLY	Y10T137/7498		179
Y10T137/7501	10	With shut-off between supply tank and receiver	CPCONLY	Y10T137/7501		187
Y10T137/7504	8	Removable valve head and seat unit	CPCONLY	Y10T137/7504		656
Y10T137/7559	9	Pump type	CPCONLY	Y10T137/7559		344
Y10T137/7613	9	Threaded into valve casing	CPCONLY	Y10T137/7613		481
Y10T137/7668	9	Retained by bonnet or closure	CPCONLY	Y10T137/7668		532
Y10T137/7722	8	Line condition change responsive valves	CPCONLY	Y10T137/7722		262
Y10T137/7723	9	Safety cut-off requiring reset	CPCONLY	Y10T137/7723		199
Y10T137/7724	10	Thermal	CPCONLY	Y10T137/7724		100
Y10T137/7725	10	Responsive to both high and low pressure or velocity	CPCONLY	Y10T137/7725		193
Y10T137/7726	10	Responsive to change in rate of flow	CPCONLY	Y10T137/7726		129
Y10T137/7727	11	Excessive flow cut-off	CPCONLY	Y10T137/7727		456
Y10T137/7728	10	High pressure cut-off	CPCONLY	Y10T137/7728		188
Y10T137/7729	10	Reset by pressure equalization valve or by-pass	CPCONLY	Y10T137/7729		182
Y10T137/773	10	Fluid released trip	CPCONLY	Y10T137/773		251
Y10T137/7731	10	Fluid counter-biased or unseated valve	CPCONLY	Y10T137/7731		163
Y10T137/7732	11	With mechanical stop against reopening	CPCONLY	Y10T137/7732		119
Y10T137/7733	11	With fluid pressure seating of valve	CPCONLY	Y10T137/7733		130
Y10T137/7734	9	Fluid opened valve requiring reset	CPCONLY	Y10T137/7734		263
Y10T137/7736	9	Consistency responsive	CPCONLY	Y10T137/7736		84
Y10T137/7737	9	Thermal responsive	CPCONLY	Y10T137/7737		841
Y10T137/7738	9	Pop valves	CPCONLY	Y10T137/7738		430
Y10T137/7739	10	Pop closing valves	CPCONLY	Y10T137/7739		48
Y10T137/774	10	Pop pressure reactor in inflow to valve	CPCONLY	Y10T137/774		62
Y10T137/7741	10	Pop pressure reactor in branched released path	CPCONLY	Y10T137/7741		55
Y10T137/7742	11	Separate relief valves or valves for each branch	CPCONLY	Y10T137/7742		32
Y10T137/7743	10	Lost motion between pop pressure reactor and valve	CPCONLY	Y10T137/7743		35
Y10T137/7744	10	Adjustable choke	CPCONLY	Y10T137/7744		29
Y10T137/7745	11	Annular lip or baffle	CPCONLY	Y10T137/7745		25
Y10T137/7746	12	On movable valve part	CPCONLY	Y10T137/7746		27
Y10T137/7747	12	Screw threaded	CPCONLY	Y10T137/7747		105
Y10T137/7748	9	Combustion engine induction type	CPCONLY	Y10T137/7748		83
Y10T137/7749	10	Valve in auxiliary inlet to induction line	CPCONLY	Y10T137/7749		238
Y10T137/775	10	With manual modifier	CPCONLY	Y10T137/775		96
Y10T137/7751	10	With suction compensator	CPCONLY	Y10T137/7751		42
Y10T137/7752	10	With separate reactor surface	CPCONLY	Y10T137/7752		227
Y10T137/7753	10	Unbalanced pivoted valve [e.g., unbalanced butterfly type]	CPCONLY	Y10T137/7753		102
Y10T137/7754	9	Line flow effect assisted	CPCONLY	Y10T137/7754		185
Y10T137/7755	10	Reactor surface normal to flow	CPCONLY	Y10T137/7755		75
Y10T137/7756	10	Reactor surface separated from flow by apertured partition	CPCONLY	Y10T137/7756		38
Y10T137/7757	11	Through separate aperture	CPCONLY	Y10T137/7757		92
Y10T137/7758	9	Pilot or servo controlled	CPCONLY	Y10T137/7758		188
Y10T137/7759	10	Responsive to change in rate of fluid flow	CPCONLY	Y10T137/7759		825
Y10T137/776	11	Control by pressures across flow line valve	CPCONLY	Y10T137/776		250
Y10T137/7761	10	Electrically actuated valve	CPCONLY	Y10T137/7761		1530
Y10T137/7762	10	Fluid pressure type	CPCONLY	Y10T137/7762		716
Y10T137/7764	11	Choked or throttled pressure type	CPCONLY	Y10T137/7764		635
Y10T137/7765	12	Pilot valve within main valve head	CPCONLY	Y10T137/7765		145
Y10T137/7766	12	Choked passage through main valve head	CPCONLY	Y10T137/7766		340
Y10T137/7767	12	Loose fitting piston	CPCONLY	Y10T137/7767		66
Y10T137/7768	12	Pilot controls supply to pressure chamber	CPCONLY	Y10T137/7768		331
Y10T137/7769	11	Single acting fluid servo	CPCONLY	Y10T137/7769		327
Y10T137/777	12	Spring biased	CPCONLY	Y10T137/777		424
Y10T137/7771	9	Bi-directional flow valves	CPCONLY	Y10T137/7771		584
Y10T137/7772	10	One head and seat carried by head of another	CPCONLY	Y10T137/7772		110
Y10T137/7773	11	Supporting valve only spring biased	CPCONLY	Y10T137/7773		132
Y10T137/7774	11	Supporting valve spring carried by supporting valve	CPCONLY	Y10T137/7774		143
Y10T137/7775	12	Spring stop on supported valve stem	CPCONLY	Y10T137/7775		120
Y10T137/7776	12	Spring abuts guide for supported valve stem	CPCONLY	Y10T137/7776		49
Y10T137/7777	11	Both valves spring biased	CPCONLY	Y10T137/7777		260
Y10T137/7778	10	Axes of ports perpendicular	CPCONLY	Y10T137/7778		87
Y10T137/7779	10	Axes of ports parallel	CPCONLY	Y10T137/7779		360
Y10T137/778	10	Axes of ports co-axial	CPCONLY	Y10T137/778		393
Y10T137/7781	9	With separate connected fluid reactor surface	CPCONLY	Y10T137/7781		1158
Y10T137/7782	10	With manual or external control for line valve	CPCONLY	Y10T137/7782		1041
Y10T137/7783	10	Valve closes in responses to reverse flow	CPCONLY	Y10T137/7783		277
Y10T137/7784	10	Responsive to change in rate of fluid flow	CPCONLY	Y10T137/7784		162
Y10T137/7785	11	Valve closes in response to excessive flow	CPCONLY	Y10T137/7785		424
Y10T137/7786	11	Turbine or swinging vane type reactor	CPCONLY	Y10T137/7786		182
Y10T137/7787	11	Expansible chamber subject to differential pressures	CPCONLY	Y10T137/7787		202
Y10T137/7788	12	Pressures across fixed choke	CPCONLY	Y10T137/7788		555
Y10T137/7789	12	With Venturi tube having a connection to throat	CPCONLY	Y10T137/7789		100
Y10T137/7791	12	Pressures across flow line valve	CPCONLY	Y10T137/7791		267
Y10T137/7792	11	Movable deflector or choke	CPCONLY	Y10T137/7792		502
Y10T137/7793	10	With opening bias [e.g., pressure regulator]	CPCONLY	Y10T137/7793		712
Y10T137/7794	11	With relief valve	CPCONLY	Y10T137/7794		283
Y10T137/7795	11	Multi-stage	CPCONLY	Y10T137/7795		284
Y10T137/7796	11	Senses inlet pressure	CPCONLY	Y10T137/7796		386
Y10T137/7797	11	Bias variable during operation	CPCONLY	Y10T137/7797		135
Y10T137/7798	12	Ancillary reactor surface responds to inlet pressure	CPCONLY	Y10T137/7798		54
Y10T137/7799	12	Liquid transfer	CPCONLY	Y10T137/7799		25
Y10T137/78	12	Weight	CPCONLY	Y10T137/78		32
Y10T137/7801	11	Balanced valve	CPCONLY	Y10T137/7801		429
Y10T137/7802	11	Liquid level responsive gas flow control	CPCONLY	Y10T137/7802		68
Y10T137/7803	11	With protective separator	CPCONLY	Y10T137/7803		33
Y10T137/7804	11	Main flow through isolated reactor chamber	CPCONLY	Y10T137/7804		85
Y10T137/7805	11	Through external pipe	CPCONLY	Y10T137/7805		293
Y10T137/7806	12	Modified valve casing	CPCONLY	Y10T137/7806		73
Y10T137/7807	12	Adjustable external lever	CPCONLY	Y10T137/7807		103
Y10T137/7808	11	Apertured reactor surface surrounds flow line	CPCONLY	Y10T137/7808		390
Y10T137/7809	11	Reactor surface separated by apertured partition	CPCONLY	Y10T137/7809		128
Y10T137/781	12	In valve stem	CPCONLY	Y10T137/781		37
Y10T137/7811	13	Also through reactor surface	CPCONLY	Y10T137/7811		101
Y10T137/7812	12	Valve stem passes through the aperture	CPCONLY	Y10T137/7812		100
Y10T137/7813	13	Plural reactor surfaces	CPCONLY	Y10T137/7813		74
Y10T137/7814	13	Reactor is an inverted cup having liquid seal	CPCONLY	Y10T137/7814		41
Y10T137/7815	14	With movement dampener	CPCONLY	Y10T137/7815		20
Y10T137/7816	14	Valve head in inlet chamber	CPCONLY	Y10T137/7816		72
Y10T137/7818	13	Valve head in inlet chamber	CPCONLY	Y10T137/7818		61
Y10T137/7819	14	Rectilinear valve stem rigid with reactor surface	CPCONLY	Y10T137/7819		88
Y10T137/782	12	Reactor surface is diaphragm	CPCONLY	Y10T137/782		162
Y10T137/7821	13	With valve closing bias	CPCONLY	Y10T137/7821		87
Y10T137/7822	11	Reactor surface closes chamber	CPCONLY	Y10T137/7822		235
Y10T137/7823	12	Valve head in inlet chamber	CPCONLY	Y10T137/7823		130
Y10T137/7824	13	Reactor surface is inverted cup [float]	CPCONLY	Y10T137/7824		82
Y10T137/7825	13	Rectilinear valve stem rigid with reactor surface	CPCONLY	Y10T137/7825		353
Y10T137/7826	13	With valve closing bias	CPCONLY	Y10T137/7826		417
Y10T137/7827	14	In reactor chamber	CPCONLY	Y10T137/7827		52
Y10T137/7828	12	Valve head on yoke	CPCONLY	Y10T137/7828		119
Y10T137/7829	13	Yoke has valve closing bias	CPCONLY	Y10T137/7829		65
Y10T137/783	12	Reactor operatively connected to valve by mechanical movement	CPCONLY	Y10T137/783		330
Y10T137/7831	11	With mechanical movement between actuator and valve	CPCONLY	Y10T137/7831		305
Y10T137/7832	10	Plural valves biased closed	CPCONLY	Y10T137/7832		370
Y10T137/7833	10	With means for mounting or connecting to system	CPCONLY	Y10T137/7833		74
Y10T137/7834	10	Valve seat or external sleeve moves to open valve	CPCONLY	Y10T137/7834		519
Y10T137/7835	10	Valve seating in direction of flow	CPCONLY	Y10T137/7835		420
Y10T137/7836	11	Flexible diaphragm or bellows reactor	CPCONLY	Y10T137/7836		800
Y10T137/7837	9	Direct response valves [i.e., check valve type]	CPCONLY	Y10T137/7837		483
Y10T137/7838	10	Plural	CPCONLY	Y10T137/7838		1188
Y10T137/7839	11	Dividing and recombining in a single flow path	CPCONLY	Y10T137/7839		774
Y10T137/784	12	Integral resilient member forms plural valves	CPCONLY	Y10T137/784		506
Y10T137/7841	11	One valve carries head and seat for second valve	CPCONLY	Y10T137/7841		308
Y10T137/7842	11	Diverse types	CPCONLY	Y10T137/7842		537
Y10T137/7843	11	Integral resilient member forms plural valves	CPCONLY	Y10T137/7843		288
Y10T137/7845	11	With common biasing means	CPCONLY	Y10T137/7845		196
Y10T137/7846	11	Mechanically interconnected	CPCONLY	Y10T137/7846		308
Y10T137/7847	10	With leak passage	CPCONLY	Y10T137/7847		422
Y10T137/7848	11	Permits flow at valve interface	CPCONLY	Y10T137/7848		324
Y10T137/7849	11	Bypass in valve casing	CPCONLY	Y10T137/7849		176
Y10T137/785	10	With retarder or dashpot	CPCONLY	Y10T137/785		392
Y10T137/7851	11	End of valve forms dashpot chamber	CPCONLY	Y10T137/7851		126
Y10T137/7852	11	End of valve moves inside dashpot chamber	CPCONLY	Y10T137/7852		238
Y10T137/7853	12	Enlarged piston on end of valve stem	CPCONLY	Y10T137/7853		221
Y10T137/7854	10	In couplings for coaxial conduits, e.g., drill pipe check valves	CPCONLY	Y10T137/7854		198
Y10T137/7855	11	Valve seat threaded into a coupling element	CPCONLY	Y10T137/7855		62
Y10T137/7856	11	Valve seat formed on or carried by a coupling element	CPCONLY	Y10T137/7856		299
Y10T137/7857	11	Valve seat clamped between coupling elements	CPCONLY	Y10T137/7857		196
Y10T137/7858	10	With means for selecting area of valve or seat	CPCONLY	Y10T137/7858		25
Y10T137/7859	10	Single head, plural ports in parallel	CPCONLY	Y10T137/7859		180
Y10T137/786	11	Concentric ports	CPCONLY	Y10T137/786		140
Y10T137/7861	11	Annular head	CPCONLY	Y10T137/7861		173
Y10T137/7862	12	Central post on seat	CPCONLY	Y10T137/7862		49
Y10T137/7863	13	Stop	CPCONLY	Y10T137/7863		45
Y10T137/7864	14	With guide	CPCONLY	Y10T137/7864		106
Y10T137/7865	13	Guide	CPCONLY	Y10T137/7865		80
Y10T137/7866	10	Plural seating	CPCONLY	Y10T137/7866		287
Y10T137/7867	11	Sequential	CPCONLY	Y10T137/7867		160
Y10T137/7868	12	Resilient gasket	CPCONLY	Y10T137/7868		281
Y10T137/7869	10	Biased open	CPCONLY	Y10T137/7869		840
Y10T137/787	11	Oppositely swinging vanes	CPCONLY	Y10T137/787		32
Y10T137/7871	11	Weight biased	CPCONLY	Y10T137/7871		306
Y10T137/7873	12	Ball valves	CPCONLY	Y10T137/7873		247
Y10T137/7874	12	Edge pivoted valve	CPCONLY	Y10T137/7874		104
Y10T137/7875	11	Pivoted valves	CPCONLY	Y10T137/7875		170
Y10T137/7876	10	With external means for opposing bias	CPCONLY	Y10T137/7876		458
Y10T137/7877	11	With means for retaining external means in bias opposing position	CPCONLY	Y10T137/7877		265
Y10T137/7878	10	With bias adjustment indicator	CPCONLY	Y10T137/7878		188
Y10T137/7879	10	Resilient material valve	CPCONLY	Y10T137/7879		454
Y10T137/788	11	Having expansible port	CPCONLY	Y10T137/788		160
Y10T137/7881	12	Apertured plate	CPCONLY	Y10T137/7881		104
Y10T137/7882	12	Having exit lip	CPCONLY	Y10T137/7882		370
Y10T137/7883	13	With biasing means	CPCONLY	Y10T137/7883		88
Y10T137/7884	13	Side vent	CPCONLY	Y10T137/7884		68
Y10T137/7885	13	Multiple slit	CPCONLY	Y10T137/7885		191
Y10T137/7886	13	Internally extending mount	CPCONLY	Y10T137/7886		98
Y10T137/7887	11	Center flexing strip	CPCONLY	Y10T137/7887		99
Y10T137/7888	11	With valve member flexing about securement	CPCONLY	Y10T137/7888		237
Y10T137/7889	12	Sleeve	CPCONLY	Y10T137/7889		274
Y10T137/789	12	Central mount	CPCONLY	Y10T137/789		530
Y10T137/7891	12	Flap or reed	CPCONLY	Y10T137/7891		557
Y10T137/7892	13	With stop	CPCONLY	Y10T137/7892		279
Y10T137/7897	10	Vacuum relief type	CPCONLY	Y10T137/7897		393
Y10T137/7898	10	Pivoted valves	CPCONLY	Y10T137/7898		773
Y10T137/79	11	Head retained by removable closure	CPCONLY	Y10T137/79		90
Y10T137/7901	11	Valve head movably connected for accommodation to seat	CPCONLY	Y10T137/7901		208
Y10T137/7902	11	Valve mounted on end of pipe	CPCONLY	Y10T137/7902		196
Y10T137/7903	11	Weight biased	CPCONLY	Y10T137/7903		863
Y10T137/7904	10	Reciprocating valves	CPCONLY	Y10T137/7904		381
Y10T137/7905	11	Plural biasing means	CPCONLY	Y10T137/7905		483
Y10T137/7906	11	Cam means for adjusting and fixing bias	CPCONLY	Y10T137/7906		72
Y10T137/7907	11	Varying effective lever arm	CPCONLY	Y10T137/7907		65
Y10T137/7908	11	Weight biased	CPCONLY	Y10T137/7908		199
Y10T137/7909	12	Valve body is the weight	CPCONLY	Y10T137/7909		205
Y10T137/791	13	Ball valves	CPCONLY	Y10T137/791		517
Y10T137/7911	14	Removable cage	CPCONLY	Y10T137/7911		206
Y10T137/7912	14	Separable seat	CPCONLY	Y10T137/7912		163
Y10T137/7913	13	Guided head	CPCONLY	Y10T137/7913		242
Y10T137/7914	14	Cage	CPCONLY	Y10T137/7914		218
Y10T137/7915	14	Guide stem	CPCONLY	Y10T137/7915		242
Y10T137/7916	15	With closing stop	CPCONLY	Y10T137/7916		35
Y10T137/7917	15	Oppositely disposed	CPCONLY	Y10T137/7917		109
Y10T137/7918	15	Head slidable on guide rod	CPCONLY	Y10T137/7918		126
Y10T137/7919	15	Guide and seat integral unit	CPCONLY	Y10T137/7919		153
Y10T137/792	15	Guide and closure integral unit	CPCONLY	Y10T137/792		157
Y10T137/7921	12	Weight coaxial with valve	CPCONLY	Y10T137/7921		167
Y10T137/7922	11	Spring biased	CPCONLY	Y10T137/7922		420
Y10T137/7923	12	With means to protect spring from fluid	CPCONLY	Y10T137/7923		289
Y10T137/7924	12	Spring under tension	CPCONLY	Y10T137/7924		144
Y10T137/7925	12	Piston-type valves	CPCONLY	Y10T137/7925		515
Y10T137/7927	12	Ball valves	CPCONLY	Y10T137/7927		512
Y10T137/7928	13	With follower	CPCONLY	Y10T137/7928		208
Y10T137/7929	12	Spring coaxial with valve	CPCONLY	Y10T137/7929		949
Y10T137/793	13	Broken valve parts retainer	CPCONLY	Y10T137/793		31
Y10T137/7931	13	Spring in inlet	CPCONLY	Y10T137/7931		407
Y10T137/7932	13	Valve stem extends through fixed spring abutment	CPCONLY	Y10T137/7932		544
Y10T137/7933	14	Yoke or cage-type support for valve stem	CPCONLY	Y10T137/7933		177
Y10T137/7934	13	Spring abuts removable valve stem guide	CPCONLY	Y10T137/7934		288
Y10T137/7935	13	Head slides on guide-rod concentric with spring	CPCONLY	Y10T137/7935		318
Y10T137/7936	13	Spring guides valve head	CPCONLY	Y10T137/7936		269
Y10T137/7937	13	Cage-type guide for stemless valves	CPCONLY	Y10T137/7937		241
Y10T137/7938	13	Guide means integral and coplanar with valve disk	CPCONLY	Y10T137/7938		156
Y10T137/7939	13	Head between spring and guide	CPCONLY	Y10T137/7939		273
Y10T137/794	8	With means for separating solid material from the fluid	CPCONLY	Y10T137/794		836
Y10T137/7976	9	Plural separating elements	CPCONLY	Y10T137/7976		223
Y10T137/8013	9	Sediment chamber	CPCONLY	Y10T137/8013		278
Y10T137/8049	9	Movable strainer	CPCONLY	Y10T137/8049		119
Y10T137/8085	9	Hollow strainer, fluid inlet and outlet perpendicular to each other	CPCONLY	Y10T137/8085		547
Y10T137/8122	9	Planar strainer normal to flow path	CPCONLY	Y10T137/8122		567
Y10T137/8158	8	With indicator, register, recorder, alarm or inspection means	CPCONLY	Y10T137/8158		957
Y10T137/8175	9	Plural	CPCONLY	Y10T137/8175		437
Y10T137/8192	10	Unobvious - "combination lock" type	CPCONLY	Y10T137/8192		85
Y10T137/8208	9	Time	CPCONLY	Y10T137/8208		105
Y10T137/8225	9	Position or extent of motion indicator	CPCONLY	Y10T137/8225		600
Y10T137/8242	10	Electrical	CPCONLY	Y10T137/8242		1048
Y10T137/8259	10	Selection from plural branches	CPCONLY	Y10T137/8259		135
Y10T137/8275	10	Indicator element rigidly carried by the movable element whose position is indicated	CPCONLY	Y10T137/8275		591
Y10T137/8292	11	Movable indicator element is a pointer	CPCONLY	Y10T137/8292		247
Y10T137/8309	12	Pointer integral with handle	CPCONLY	Y10T137/8309		213
Y10T137/8326	9	Fluid pressure responsive indicator, recorder or alarm	CPCONLY	Y10T137/8326		1391
Y10T137/8342	9	Liquid level responsive indicator, recorder or alarm	CPCONLY	Y10T137/8342		709
Y10T137/8359	9	Inspection means	CPCONLY	Y10T137/8359		634
Y10T137/8376	8	Combined	CPCONLY	Y10T137/8376		546
Y10T137/8593	8	Systems	CPCONLY	Y10T137/8593		1152
Y10T137/85938	9	Non-valved flow dividers	CPCONLY	Y10T137/85938		651
Y10T137/85946	9	Faucet connected, sink drained	CPCONLY	Y10T137/85946		92
Y10T137/85954	9	Closed circulating system	CPCONLY	Y10T137/85954		720
Y10T137/85962	10	With thermal circulating means [thermo-siphons]	CPCONLY	Y10T137/85962		60
Y10T137/8597	9	Main line as motive fluid for follower-type feeder	CPCONLY	Y10T137/8597		167
Y10T137/85978	9	With pump	CPCONLY	Y10T137/85978		664
Y10T137/85986	10	Pumped fluid control	CPCONLY	Y10T137/85986		300
Y10T137/85994	11	Manual	CPCONLY	Y10T137/85994		102
Y10T137/86002	11	Fluid pressure responsive	CPCONLY	Y10T137/86002		156
Y10T137/8601	12	And pilot valve	CPCONLY	Y10T137/8601		42
Y10T137/86019	12	Direct response valve	CPCONLY	Y10T137/86019		111
Y10T137/86027	11	Electric	CPCONLY	Y10T137/86027		166
Y10T137/86035	10	Combined with fluid receiver	CPCONLY	Y10T137/86035		415
Y10T137/86043	11	Reserve or surge receiver	CPCONLY	Y10T137/86043		317
Y10T137/86051	11	Compressed air supply unit	CPCONLY	Y10T137/86051		93
Y10T137/86059	11	Hydraulic power unit	CPCONLY	Y10T137/86059		52
Y10T137/86067	11	Fluid sump	CPCONLY	Y10T137/86067		84
Y10T137/86075	10	And jet-aspiration type pump	CPCONLY	Y10T137/86075		130
Y10T137/86083	10	Vacuum pump	CPCONLY	Y10T137/86083		185
Y10T137/86091	10	Resiliently mounted pump	CPCONLY	Y10T137/86091		35
Y10T137/86099	10	Hand pump	CPCONLY	Y10T137/86099		62
Y10T137/86107	10	Multiple inlet with multiple outlet	CPCONLY	Y10T137/86107		37
Y10T137/86115	10	Downstream cyclic distributor	CPCONLY	Y10T137/86115		99
Y10T137/86123	11	Distributor part unitary with movable pump part	CPCONLY	Y10T137/86123		37
Y10T137/86131	10	Plural	CPCONLY	Y10T137/86131		191
Y10T137/86139	11	Serial	CPCONLY	Y10T137/86139		147
Y10T137/86147	12	With single motive input	CPCONLY	Y10T137/86147		55
Y10T137/86155	13	One pump driven by motive fluid from the other	CPCONLY	Y10T137/86155		8
Y10T137/86163	11	Parallel	CPCONLY	Y10T137/86163		375
Y10T137/86171	10	With pump bypass	CPCONLY	Y10T137/86171		221
Y10T137/86179	10	Drain valve actuator mounted on pump	CPCONLY	Y10T137/86179		50
Y10T137/86187	9	Plural tanks or compartments connected for serial flow	CPCONLY	Y10T137/86187		772
Y10T137/86196	10	Separable with valved-connecting passage	CPCONLY	Y10T137/86196		327
Y10T137/86204	10	Fluid progresses by zigzag flow	CPCONLY	Y10T137/86204		76
Y10T137/86212	10	Plural compartments formed by baffles	CPCONLY	Y10T137/86212		371
Y10T137/8622	10	Plural top-to-bottom connected tanks	CPCONLY	Y10T137/8622		207
Y10T137/86228	10	With communicating opening in common walls of tanks or compartments	CPCONLY	Y10T137/86228		429
Y10T137/86236	9	Tank with movable or adjustable outlet or overflow pipe	CPCONLY	Y10T137/86236		356
Y10T137/86244	10	Horizontally traversing outlet	CPCONLY	Y10T137/86244		40
Y10T137/86252	10	Float-supported outlet	CPCONLY	Y10T137/86252		205
Y10T137/8626	10	Swinging outlet pipe or spout	CPCONLY	Y10T137/8626		187
Y10T137/86268	9	With running joint between movable parts of system	CPCONLY	Y10T137/86268		359
Y10T137/86276	9	Movable tank	CPCONLY	Y10T137/86276		142
Y10T137/86284	9	With antisplash means not in flow passage	CPCONLY	Y10T137/86284		73
Y10T137/86292	9	System with plural openings, one a gas vent or access opening	CPCONLY	Y10T137/86292		433
Y10T137/863	10	Access and outlet	CPCONLY	Y10T137/863		300
Y10T137/86308	11	Tank access opening and bottom outlet	CPCONLY	Y10T137/86308		97
Y10T137/86316	12	Access opening interlock or telltale on outlet valve actuator	CPCONLY	Y10T137/86316		48
Y10T137/86324	10	Tank with gas vent and inlet or outlet	CPCONLY	Y10T137/86324		876
Y10T137/86332	11	Vent and inlet or outlet in unitary mounting	CPCONLY	Y10T137/86332		675
Y10T137/8634	10	With vented outlet	CPCONLY	Y10T137/8634		196
Y10T137/86348	9	Tank with internally extending flow guide, pipe or conduit	CPCONLY	Y10T137/86348		869
Y10T137/86356	10	Nondraining overflow type	CPCONLY	Y10T137/86356		48
Y10T137/86364	10	Inverted "U" passage	CPCONLY	Y10T137/86364		60
Y10T137/86372	10	Inlet internally extending	CPCONLY	Y10T137/86372		556
Y10T137/86381	9	Head-establishing standpipe or expansion chamber [e.g., surge tanks]	CPCONLY	Y10T137/86381		237
Y10T137/86389	9	Programmer or timer	CPCONLY	Y10T137/86389		763
Y10T137/86397	10	With independent valve controller	CPCONLY	Y10T137/86397		266
Y10T137/86405	10	Repeating cycle	CPCONLY	Y10T137/86405		678
Y10T137/86413	11	Self-cycling	CPCONLY	Y10T137/86413		703
Y10T137/86421	11	Variable	CPCONLY	Y10T137/86421		293
Y10T137/86429	12	Attachable and removable element	CPCONLY	Y10T137/86429		79
Y10T137/86437	12	Adjustable cam	CPCONLY	Y10T137/86437		127
Y10T137/86445	10	Plural, sequential, valve actuations	CPCONLY	Y10T137/86445		613
Y10T137/86453	11	Plural trips or trip actuations	CPCONLY	Y10T137/86453		35
Y10T137/86461	11	Variable cycle	CPCONLY	Y10T137/86461		285
Y10T137/86469	10	Clock alarm mechanism controlled	CPCONLY	Y10T137/86469		51
Y10T137/86477	10	Biased latch, cam operated	CPCONLY	Y10T137/86477		80
Y10T137/86485	9	Line condition change responsive release of valve	CPCONLY	Y10T137/86485		308
Y10T137/86493	9	Multi-way valve unit	CPCONLY	Y10T137/86493		536
Y10T137/86501	10	Sequential distributor or collector type	CPCONLY	Y10T137/86501		801
Y10T137/86509	10	Sequentially progressive opening or closing of plural ports	CPCONLY	Y10T137/86509		286
Y10T137/86517	11	With subsequent closing of first port	CPCONLY	Y10T137/86517		64
Y10T137/86525	12	Flow combining with flow dividing	CPCONLY	Y10T137/86525		28
Y10T137/86533	12	Rotary	CPCONLY	Y10T137/86533		175
Y10T137/86541	13	Plug	CPCONLY	Y10T137/86541		147
Y10T137/86549	10	Selective reciprocation or rotation	CPCONLY	Y10T137/86549		629
Y10T137/86558	10	Plural noncommunicating flow paths	CPCONLY	Y10T137/86558		250
Y10T137/86566	11	Rotary plug	CPCONLY	Y10T137/86566		377
Y10T137/86574	10	Supply and exhaust	CPCONLY	Y10T137/86574		153
Y10T137/86582	11	Pilot-actuated	CPCONLY	Y10T137/86582		356
Y10T137/8659	12	Variable orifice-type modulator	CPCONLY	Y10T137/8659		177
Y10T137/86598	13	Opposed orifices; interposed modulator	CPCONLY	Y10T137/86598		203
Y10T137/86606	12	Common to plural valve motor chambers	CPCONLY	Y10T137/86606		377
Y10T137/86614	12	Electric	CPCONLY	Y10T137/86614		888
Y10T137/86622	11	Motor-operated	CPCONLY	Y10T137/86622		1088
Y10T137/8663	12	Fluid motor	CPCONLY	Y10T137/8663		728
Y10T137/86638	11	Rotary valve	CPCONLY	Y10T137/86638		566
Y10T137/86646	12	Plug type	CPCONLY	Y10T137/86646		437
Y10T137/86654	13	For plural lines	CPCONLY	Y10T137/86654		412
Y10T137/86662	13	Axial and radial flow	CPCONLY	Y10T137/86662		461
Y10T137/8667	11	Reciprocating valve	CPCONLY	Y10T137/8667		623
Y10T137/86678	12	Combined disk or plug and gate or piston	CPCONLY	Y10T137/86678		211
Y10T137/86686	12	Plural disk or plug	CPCONLY	Y10T137/86686		484
Y10T137/86694	12	Piston valve	CPCONLY	Y10T137/86694		127
Y10T137/86702	13	With internal flow passage	CPCONLY	Y10T137/86702		655
Y10T137/8671	13	With annular passage [e.g., spool]	CPCONLY	Y10T137/8671		1064
Y10T137/86718	10	Dividing into parallel flow paths with recombining	CPCONLY	Y10T137/86718		258
Y10T137/86726	11	Valve with bypass connections	CPCONLY	Y10T137/86726		347
Y10T137/86734	11	With metering feature	CPCONLY	Y10T137/86734		735
Y10T137/86743	11	Rotary	CPCONLY	Y10T137/86743		417
Y10T137/86751	12	Plug	CPCONLY	Y10T137/86751		365
Y10T137/86759	11	Reciprocating	CPCONLY	Y10T137/86759		437
Y10T137/86767	12	Spool	CPCONLY	Y10T137/86767		203
Y10T137/86775	13	With internal passage	CPCONLY	Y10T137/86775		94
Y10T137/86783	13	Unequal heads	CPCONLY	Y10T137/86783		94
Y10T137/86791	12	Piston	CPCONLY	Y10T137/86791		242
Y10T137/86799	13	With internal flow passage	CPCONLY	Y10T137/86799		305
Y10T137/86807	14	Sequential opening or closing of serial ports in single flow line	CPCONLY	Y10T137/86807		93
Y10T137/86815	10	Multiple inlet with single outlet	CPCONLY	Y10T137/86815		909
Y10T137/86823	11	Rotary valve	CPCONLY	Y10T137/86823		795
Y10T137/86831	10	Selective opening of plural ports	CPCONLY	Y10T137/86831		301
Y10T137/86839	10	Four port reversing valves	CPCONLY	Y10T137/86839		467
Y10T137/86847	10	Pivoted valve unit	CPCONLY	Y10T137/86847		338
Y10T137/86855	11	Gate	CPCONLY	Y10T137/86855		75
Y10T137/86863	10	Rotary valve unit	CPCONLY	Y10T137/86863		864
Y10T137/86871	11	Plug	CPCONLY	Y10T137/86871		1188
Y10T137/86879	10	Reciprocating valve unit	CPCONLY	Y10T137/86879		970
Y10T137/86887	11	Combined disk or plug and gate or piston	CPCONLY	Y10T137/86887		105
Y10T137/86895	11	Plural disk or plug	CPCONLY	Y10T137/86895		508
Y10T137/86903	9	Plural petcocks	CPCONLY	Y10T137/86903		22
Y10T137/86911	9	Sequential distributor or collector type	CPCONLY	Y10T137/86911		315
Y10T137/86919	9	Sequentially closing and opening alternately seating flow controllers	CPCONLY	Y10T137/86919		1138
Y10T137/86928	9	Sequentially progressive opening or closing of plural valves	CPCONLY	Y10T137/86928		580
Y10T137/86936	10	Pressure equalizing or auxiliary shunt flow	CPCONLY	Y10T137/86936		212
Y10T137/86944	11	One valve seats against other valve [e.g., concentric valves]	CPCONLY	Y10T137/86944		127
Y10T137/86952	12	Locomotive throttle	CPCONLY	Y10T137/86952		49
Y10T137/8696	12	Gate	CPCONLY	Y10T137/8696		58
Y10T137/86968	12	With balancing chamber	CPCONLY	Y10T137/86968		55
Y10T137/86976	12	First valve moves second valve	CPCONLY	Y10T137/86976		298
Y10T137/86984	12	Actuator moves both valves	CPCONLY	Y10T137/86984		265
Y10T137/86992	10	With subsequent closing of first opened port	CPCONLY	Y10T137/86992		111
Y10T137/87	11	Simultaneously moved port controllers	CPCONLY	Y10T137/87		81
Y10T137/87008	10	Screw-actuated differential valves	CPCONLY	Y10T137/87008		49
Y10T137/87016	10	Lost motion	CPCONLY	Y10T137/87016		291
Y10T137/87024	11	Cam determines sequence	CPCONLY	Y10T137/87024		103
Y10T137/87032	11	Rotary concentric valves	CPCONLY	Y10T137/87032		24
Y10T137/8704	11	First valve actuates second valve	CPCONLY	Y10T137/8704		275
Y10T137/87048	9	With preselecting means for plural valve actuator	CPCONLY	Y10T137/87048		286
Y10T137/87056	9	With selective motion for plural valve actuator	CPCONLY	Y10T137/87056		404
Y10T137/87064	10	Oppositely movable cam surfaces	CPCONLY	Y10T137/87064		453
Y10T137/87072	10	Rotation about either of two pivotal axes	CPCONLY	Y10T137/87072		256
Y10T137/8708	10	Rotation of actuator arm about its pivot and its axis	CPCONLY	Y10T137/8708		127
Y10T137/87088	10	Reciprocation along and rotation about same axis	CPCONLY	Y10T137/87088		200
Y10T137/87096	9	Valves with separate, correlated, actuators	CPCONLY	Y10T137/87096		480
Y10T137/87105	10	Correlated across separable flow path joint	CPCONLY	Y10T137/87105		45
Y10T137/87113	10	Interlocked	CPCONLY	Y10T137/87113		290
Y10T137/87121	10	Coaxial stems	CPCONLY	Y10T137/87121		171
Y10T137/87129	11	Rotary	CPCONLY	Y10T137/87129		116
Y10T137/87137	12	And reciprocating	CPCONLY	Y10T137/87137		170
Y10T137/87145	12	Concentric, central valve removable	CPCONLY	Y10T137/87145		32
Y10T137/87153	9	Plural noncommunicating flow paths	CPCONLY	Y10T137/87153		434
Y10T137/87161	10	With common valve operator	CPCONLY	Y10T137/87161		788
Y10T137/87169	9	Supply and exhaust	CPCONLY	Y10T137/87169		1026
Y10T137/87177	10	With bypass	CPCONLY	Y10T137/87177		334
Y10T137/87185	11	Controlled by supply or exhaust valve	CPCONLY	Y10T137/87185		372
Y10T137/87193	10	Pilot-actuated	CPCONLY	Y10T137/87193		209
Y10T137/87201	11	Common to plural valve motor chambers	CPCONLY	Y10T137/87201		217
Y10T137/87209	11	Electric	CPCONLY	Y10T137/87209		435
Y10T137/87217	10	Motor	CPCONLY	Y10T137/87217		546
Y10T137/87225	11	Fluid motor	CPCONLY	Y10T137/87225		360
Y10T137/87233	10	Biased exhaust valve	CPCONLY	Y10T137/87233		366
Y10T137/87241	11	Biased closed	CPCONLY	Y10T137/87241		724
Y10T137/87249	9	Multiple inlet with multiple outlet	CPCONLY	Y10T137/87249		1170
Y10T137/87257	9	Hydraulic brake line [e.g., hill holders]	CPCONLY	Y10T137/87257		75
Y10T137/87265	9	Dividing into parallel flow paths with recombining	CPCONLY	Y10T137/87265		634
Y10T137/87273	10	With fluid coupling [e.g., railway car hose coupling, truck-trailer oil system coupling, etc.]	CPCONLY	Y10T137/87273		61
Y10T137/87281	10	System having plural inlets	CPCONLY	Y10T137/87281		126
Y10T137/8729	11	Having digital flow controller	CPCONLY	Y10T137/8729		33
Y10T137/87298	10	Having digital flow controller	CPCONLY	Y10T137/87298		102
Y10T137/87306	11	Having plural branches under common control for separate valve actuators	CPCONLY	Y10T137/87306		22
Y10T137/87314	12	Electromagnetic or electric control [e.g., digital control, bistable electro control, etc.]	CPCONLY	Y10T137/87314		92
Y10T137/87322	10	With multi way valve having serial valve in at least one branch	CPCONLY	Y10T137/87322		159
Y10T137/8733	10	Fluid pressure regulator in at least one branch	CPCONLY	Y10T137/8733		185
Y10T137/87338	10	Flow passage with bypass	CPCONLY	Y10T137/87338		309
Y10T137/87346	11	Including mixing feature	CPCONLY	Y10T137/87346		128
Y10T137/87354	11	Including flowmeter	CPCONLY	Y10T137/87354		82
Y10T137/87362	11	Including cleaning, treating, or heat transfer feature	CPCONLY	Y10T137/87362		169
Y10T137/8737	12	Water treatment feature	CPCONLY	Y10T137/8737		99
Y10T137/87378	10	Second valve assembly carried by first valve head	CPCONLY	Y10T137/87378		199
Y10T137/87386	11	With rotary plug having variable restrictor	CPCONLY	Y10T137/87386		56
Y10T137/87394	11	Carried valve is direct response valve [e.g., check valve, etc.]	CPCONLY	Y10T137/87394		143
Y10T137/87402	10	With foam controlling means [e.g., beer, soda faucets]	CPCONLY	Y10T137/87402		31
Y10T137/8741	10	With common operator	CPCONLY	Y10T137/8741		193
Y10T137/87418	11	Balanced valve	CPCONLY	Y10T137/87418		53
Y10T137/87426	11	Single resilient member actuates or forms plural passages	CPCONLY	Y10T137/87426		21
Y10T137/87434	11	Valves deform to close passage	CPCONLY	Y10T137/87434		42
Y10T137/87442	11	Rotary valve	CPCONLY	Y10T137/87442		75
Y10T137/8745	12	Including rigid plate with flexible or resilient seal	CPCONLY	Y10T137/8745		41
Y10T137/87458	12	Axes of rotation of valves intersect at point	CPCONLY	Y10T137/87458		12
Y10T137/87467	12	Axes of rotation parallel	CPCONLY	Y10T137/87467		44
Y10T137/87475	13	Adjacent plate valves always parallel	CPCONLY	Y10T137/87475		77
Y10T137/87483	13	Adjacent plate valves counter rotate	CPCONLY	Y10T137/87483		54
Y10T137/87491	11	Mechanical movement between actuator and non-rotary valve	CPCONLY	Y10T137/87491		53
Y10T137/87499	10	Fluid actuated or retarded	CPCONLY	Y10T137/87499		158
Y10T137/87507	10	Electrical actuator	CPCONLY	Y10T137/87507		217
Y10T137/87515	10	Mechanical movement between actuator and valve	CPCONLY	Y10T137/87515		131
Y10T137/87523	10	Rotary valve	CPCONLY	Y10T137/87523		120
Y10T137/87531	11	Butterfly valve	CPCONLY	Y10T137/87531		68
Y10T137/87539	10	Having guide or restrictor	CPCONLY	Y10T137/87539		175
Y10T137/87547	11	Manually variable	CPCONLY	Y10T137/87547		115
Y10T137/87555	10	Having direct response valve [e.g., check valve, etc.]	CPCONLY	Y10T137/87555		202
Y10T137/87563	11	With reverse flow direction	CPCONLY	Y10T137/87563		50
Y10T137/87571	9	Multiple inlet with single outlet	CPCONLY	Y10T137/87571		303
Y10T137/87579	10	Faucet attachment	CPCONLY	Y10T137/87579		123
Y10T137/87587	10	Combining by aspiration	CPCONLY	Y10T137/87587		199
Y10T137/87595	11	Combining of three or more diverse fluids	CPCONLY	Y10T137/87595		141
Y10T137/87603	11	Plural motivating fluid jets	CPCONLY	Y10T137/87603		76
Y10T137/87611	11	Flow control by varying position of a fluid inlet relative to entrainment chamber	CPCONLY	Y10T137/87611		68
Y10T137/87619	11	With selectively operated flow control means in inlet	CPCONLY	Y10T137/87619		137
Y10T137/87627	12	Flow control means is located in aspirated fluid inlet	CPCONLY	Y10T137/87627		254
Y10T137/87635	13	Single actuator operates flow control means located in both motivating fluid and aspirated fluid inlets	CPCONLY	Y10T137/87635		80
Y10T137/87643	11	With condition responsive valve	CPCONLY	Y10T137/87643		228
Y10T137/87652	10	With means to promote mixing or combining of plural fluids	CPCONLY	Y10T137/87652		351
Y10T137/8766	11	With selectively operated flow control means	CPCONLY	Y10T137/8766		204
Y10T137/87668	12	Single actuator operates plural flow control means	CPCONLY	Y10T137/87668		108
Y10T137/87676	10	With flow control	CPCONLY	Y10T137/87676		625
Y10T137/87684	11	Valve in each inlet	CPCONLY	Y10T137/87684		1135
Y10T137/87692	12	With common valve operator	CPCONLY	Y10T137/87692		1097
Y10T137/877	9	With flow control means for branched passages	CPCONLY	Y10T137/877		452
Y10T137/87708	10	With common valve operator	CPCONLY	Y10T137/87708		233
Y10T137/87716	11	For valve having a flexible diaphragm valving member	CPCONLY	Y10T137/87716		111
Y10T137/87724	11	For valve having a ball head	CPCONLY	Y10T137/87724		68
Y10T137/87732	11	With gearing	CPCONLY	Y10T137/87732		137
Y10T137/8774	11	Threaded actuator	CPCONLY	Y10T137/8774		63
Y10T137/87748	11	Pivoted or rotary motion converted to reciprocating valve head motion	CPCONLY	Y10T137/87748		150
Y10T137/87756	12	Spring biased	CPCONLY	Y10T137/87756		175
Y10T137/87764	11	Having fluid actuator	CPCONLY	Y10T137/87764		179
Y10T137/87772	11	With electrical actuation	CPCONLY	Y10T137/87772		252
Y10T137/8778	11	Spring biased	CPCONLY	Y10T137/8778		168
Y10T137/87788	10	With valve or movable deflector at junction	CPCONLY	Y10T137/87788		315
Y10T137/87796	11	Movable deflector spout in lateral port	CPCONLY	Y10T137/87796		56
Y10T137/87804	11	Valve or deflector is tubular passageway	CPCONLY	Y10T137/87804		180
Y10T137/87812	11	Pivoted valve or deflector	CPCONLY	Y10T137/87812		432
Y10T137/8782	11	Rotary valve or deflector	CPCONLY	Y10T137/8782		237
Y10T137/87829	10	Biased valve	CPCONLY	Y10T137/87829		121
Y10T137/87837	11	Spring bias	CPCONLY	Y10T137/87837		102
Y10T137/87845	12	For valve having a ball head	CPCONLY	Y10T137/87845		93
Y10T137/87853	12	With threaded actuator	CPCONLY	Y10T137/87853		82
Y10T137/87861	12	Spring coaxial with valve	CPCONLY	Y10T137/87861		326
Y10T137/87869	13	Biased open	CPCONLY	Y10T137/87869		117
Y10T137/87877	10	Single inlet with multiple distinctly valved outlets	CPCONLY	Y10T137/87877		697
Y10T137/87885	10	Sectional block structure	CPCONLY	Y10T137/87885		1032
Y10T137/87893	10	With fluid actuator	CPCONLY	Y10T137/87893		188
Y10T137/87901	10	With threaded actuator	CPCONLY	Y10T137/87901		198
Y10T137/87909	10	Containing rotary valve	CPCONLY	Y10T137/87909		293
Y10T137/87917	9	Flow path with serial valves and/or closures	CPCONLY	Y10T137/87917		1912
Y10T137/87925	10	Separable flow path section, valve or closure in each	CPCONLY	Y10T137/87925		385
Y10T137/87933	11	Common joint and valve seat faces, or sections joined by closing members	CPCONLY	Y10T137/87933		129
Y10T137/87941	11	Each valve and/or closure operated by coupling motion	CPCONLY	Y10T137/87941		149
Y10T137/87949	12	Linear motion of flow path sections operates both	CPCONLY	Y10T137/87949		442
Y10T137/87957	13	Valves actuate each other	CPCONLY	Y10T137/87957		714
Y10T137/87965	11	Valve- or closure-operated by coupling motion	CPCONLY	Y10T137/87965		426
Y10T137/87973	11	Coupling interlocked with valve, or closure or actuator	CPCONLY	Y10T137/87973		324
Y10T137/87981	10	Common actuator	CPCONLY	Y10T137/87981		698
Y10T137/87989	11	Delivery cock with terminal valve	CPCONLY	Y10T137/87989		44
Y10T137/87997	11	Alternately seating	CPCONLY	Y10T137/87997		117
Y10T137/88005	12	Biased valve	CPCONLY	Y10T137/88005		212
Y10T137/88014	11	Opposed screw	CPCONLY	Y10T137/88014		14
Y10T137/88022	10	One valve head provides seat for other head	CPCONLY	Y10T137/88022		134
Y10T137/8803	11	Also carries head of other valve	CPCONLY	Y10T137/8803		441
Y10T137/88038	10	One valve head carries other valve head	CPCONLY	Y10T137/88038		267
Y10T137/88046	10	Biased valve with external operator	CPCONLY	Y10T137/88046		540
Y10T137/88054	10	Direct response normally closed valve limits direction of flow	CPCONLY	Y10T137/88054		1133
Y10T137/88062	10	Coaxial oppositely directed seats	CPCONLY	Y10T137/88062		373
Y10T137/8807	9	Articulated or swinging flow conduit	CPCONLY	Y10T137/8807		659
Y10T137/88078	10	Actuates valve	CPCONLY	Y10T137/88078		48
Y10T137/88086	11	Plural motions of valve	CPCONLY	Y10T137/88086		25
Y10T137/88094	11	Reciprocating valve	CPCONLY	Y10T137/88094		78
Y10T137/88102	11	Rotary valve	CPCONLY	Y10T137/88102		163
Y10T137/8811	8	Frangible	CPCONLY	Y10T137/8811		190
Y10T137/9029	8	With coupling	CPCONLY	Y10T137/9029		407
Y10T137/9138	9	Flexible	CPCONLY	Y10T137/9138		80
Y10T137/9247	8	With closure	CPCONLY	Y10T137/9247		180
Y10T137/9464	8	Faucets and spouts	CPCONLY	Y10T137/9464		1082
Y10T137/9682	8	Miscellaneous	CPCONLY	Y10T137/9682		99
Y10T152/00	7	Resilient tires and wheels	CPCONLY	Y10T152/00		
Y10T152/10	8	Tires, resilient	CPCONLY	Y10T152/10		238
Y10T152/10009	9	Emergency	CPCONLY	Y10T152/10009		178
Y10T152/10018	9	with splash guards	CPCONLY	Y10T152/10018		25
Y10T152/10027	9	with wear indicating feature	CPCONLY	Y10T152/10027		126
Y10T152/10036	9	Cushion and pneumatic combined	CPCONLY	Y10T152/10036		99
Y10T152/10045	10	Metallic spring cushion	CPCONLY	Y10T152/10045		140
Y10T152/10054	10	Enclosed cushion	CPCONLY	Y10T152/10054		193
Y10T152/10063	10	Superimposed	CPCONLY	Y10T152/10063		57
Y10T152/10072	11	Plungers	CPCONLY	Y10T152/10072		50
Y10T152/10081	11	Edge-secured cushion	CPCONLY	Y10T152/10081		43
Y10T152/1009	11	Guide flanges	CPCONLY	Y10T152/1009		21
Y10T152/10099	12	Radial stops	CPCONLY	Y10T152/10099		43
Y10T152/10108	13	Bolts or studs	CPCONLY	Y10T152/10108		25
Y10T152/10117	10	Integral	CPCONLY	Y10T152/10117		113
Y10T152/10126	11	with removable inner tube	CPCONLY	Y10T152/10126		98
Y10T152/10135	9	Armored	CPCONLY	Y10T152/10135		
Y10T152/10144	10	Single tube tires internal	CPCONLY	Y10T152/10144		65
Y10T152/10153	11	Metal	CPCONLY	Y10T152/10153		72
Y10T152/10162	12	Plates	CPCONLY	Y10T152/10162		15
Y10T152/10171	10	Casing construction	CPCONLY	Y10T152/10171		107
Y10T152/1018	11	Embedded	CPCONLY	Y10T152/1018		101
Y10T152/10189	12	Metal	CPCONLY	Y10T152/10189		56
Y10T152/10198	13	Plates	CPCONLY	Y10T152/10198		68
Y10T152/10207	13	Annular	CPCONLY	Y10T152/10207		85
Y10T152/10216	13	Linked mat	CPCONLY	Y10T152/10216		33
Y10T152/10225	13	Woven	CPCONLY	Y10T152/10225		65
Y10T152/10234	10	Interliners	CPCONLY	Y10T152/10234		89
Y10T152/10243	11	Cotton, fabric, or rubber	CPCONLY	Y10T152/10243		101
Y10T152/10252	11	Metal	CPCONLY	Y10T152/10252		100
Y10T152/10261	12	Scale armor	CPCONLY	Y10T152/10261		60
Y10T152/1027	12	Annular	CPCONLY	Y10T152/1027		70
Y10T152/10279	9	Cushion	CPCONLY	Y10T152/10279		268
Y10T152/10288	10	Sectional	CPCONLY	Y10T152/10288		105
Y10T152/10297	11	Annular	CPCONLY	Y10T152/10297		85
Y10T152/10306	12	Superimposed	CPCONLY	Y10T152/10306		97
Y10T152/10315	11	Superimposed	CPCONLY	Y10T152/10315		75
Y10T152/10324	11	with apertured external binders	CPCONLY	Y10T152/10324		40
Y10T152/10333	11	Radial bolt secured	CPCONLY	Y10T152/10333		83
Y10T152/10342	11	Abutting sections	CPCONLY	Y10T152/10342		135
Y10T152/10351	12	with annular internal binders	CPCONLY	Y10T152/10351		70
Y10T152/1036	12	Interfitting	CPCONLY	Y10T152/1036		56
Y10T152/10369	12	Indented at joints	CPCONLY	Y10T152/10369		54
Y10T152/10378	10	Casing enclosed core	CPCONLY	Y10T152/10378		189
Y10T152/10387	11	Separate core	CPCONLY	Y10T152/10387		109
Y10T152/10396	12	Removable	CPCONLY	Y10T152/10396		109
Y10T152/10405	13	Sponge rubber	CPCONLY	Y10T152/10405		143
Y10T152/10414	13	with core compression	CPCONLY	Y10T152/10414		56
Y10T152/10423	13	Superimposed rings	CPCONLY	Y10T152/10423		60
Y10T152/10432	13	Sectional transversely	CPCONLY	Y10T152/10432		114
Y10T152/10441	14	Balls	CPCONLY	Y10T152/10441		91
Y10T152/1045	13	Integral structure	CPCONLY	Y10T152/1045		56
Y10T152/10459	14	Recessed	CPCONLY	Y10T152/10459		64
Y10T152/10468	15	Chambered	CPCONLY	Y10T152/10468		33
Y10T152/10477	14	Perforated	CPCONLY	Y10T152/10477		31
Y10T152/10486	14	Chambered	CPCONLY	Y10T152/10486		90
Y10T152/10495	9	Pneumatic tire or inner tube	CPCONLY	Y10T152/10495		785
Y10T152/10504	10	Asymmetric tyre	CPCONLY	Y10T152/10504		65
Y10T152/10513	10	Tire reinforcement material characterized by short length fibers or the like	CPCONLY	Y10T152/10513		188
Y10T152/10522	10	Multiple chamber	CPCONLY	Y10T152/10522		78
Y10T152/10531	11	Cylinder and piston	CPCONLY	Y10T152/10531		16
Y10T152/1054	12	Mutually free walls	CPCONLY	Y10T152/1054		45
Y10T152/10549	13	Interfitting	CPCONLY	Y10T152/10549		111
Y10T152/10558	13	Balls	CPCONLY	Y10T152/10558		15
Y10T152/10567	13	with simultaneous inflating means	CPCONLY	Y10T152/10567		27
Y10T152/10576	11	Annular chambers	CPCONLY	Y10T152/10576		61
Y10T152/10585	12	with simultaneous inflating means	CPCONLY	Y10T152/10585		71
Y10T152/10594	12	Mutually free walls	CPCONLY	Y10T152/10594		174
Y10T152/10603	13	with simultaneous inflating means	CPCONLY	Y10T152/10603		74
Y10T152/10612	12	with simultaneous inflating means	CPCONLY	Y10T152/10612		115
Y10T152/10621	10	Sectional casings	CPCONLY	Y10T152/10621		47
Y10T152/1063	11	Circumferential	CPCONLY	Y10T152/1063		83
Y10T152/10639	12	Rigid inner sections	CPCONLY	Y10T152/10639		92
Y10T152/10648	10	with means restricting relative movement between tire and inner tube [e.g., anti-creep feature, etc.]	CPCONLY	Y10T152/10648		46
Y10T152/10657	10	with means to protect inner tube from rim	CPCONLY	Y10T152/10657		152
Y10T152/10666	10	Automatic sealing of punctures [e.g., self-healing, etc.]	CPCONLY	Y10T152/10666		99
Y10T152/10675	11	Using flowable coating or composition	CPCONLY	Y10T152/10675		92
Y10T152/10684	12	On inner surface of tubeless tire	CPCONLY	Y10T152/10684		170
Y10T152/10693	13	Sealant in plural layers or plural pockets	CPCONLY	Y10T152/10693		45
Y10T152/10702	12	within or part of construction of inflating inner tube	CPCONLY	Y10T152/10702		120
Y10T152/10711	13	Sealant in plural layers or plural pockets	CPCONLY	Y10T152/10711		25
Y10T152/1072	11	by compression	CPCONLY	Y10T152/1072		144
Y10T152/10729	11	with reinflating means	CPCONLY	Y10T152/10729		24
Y10T152/10738	10	with means to protect tire from rim	CPCONLY	Y10T152/10738		102
Y10T152/10747	10	Means other than rim closing the tire opening	CPCONLY	Y10T152/10747		124
Y10T152/10756	11	Positive casing closure	CPCONLY	Y10T152/10756		73
Y10T152/10765	10	Characterized by belt or breaker structure	CPCONLY	Y10T152/10765		662
Y10T152/10774	11	Consisting of only one ply	CPCONLY	Y10T152/10774		99
Y10T152/10783	11	Reinforcing plies made up from wound narrow ribbons	CPCONLY	Y10T152/10783		283
Y10T152/10792	11	Structure where each bias angle reinforcing cord ply has no opposingly angled ply	CPCONLY	Y10T152/10792		247
Y10T152/10801	11	Structure made up of two or more sets of plies wherein the reinforcing cords in one set lie in a different angular position relative to those in other sets	CPCONLY	Y10T152/10801		246
Y10T152/1081	11	Breaker or belt characterized by the chemical composition or physical properties of elastomer or the like	CPCONLY	Y10T152/1081		341
Y10T152/10819	10	Characterized by the structure of the bead portion of the tire	CPCONLY	Y10T152/10819		667
Y10T152/10828	11	Chafer or sealing strips	CPCONLY	Y10T152/10828		493
Y10T152/10837	11	Bead characterized by the radial extent of apex, flipper or chafer into tire sidewall	CPCONLY	Y10T152/10837		346
Y10T152/10846	11	Bead characterized by the chemical composition and or physical properties of elastomers or the like	CPCONLY	Y10T152/10846		437
Y10T152/10855	10	Characterized by the carcass, carcass material, or physical arrangement of the carcass materials	CPCONLY	Y10T152/10855		557
Y10T152/10864	11	Sidewall stiffening or reinforcing means other than main carcass plies or foldups thereof about beads	CPCONLY	Y10T152/10864		393
Y10T152/10873	11	with two or more differing cord materials	CPCONLY	Y10T152/10873		155
Y10T152/10882	9	Patches	CPCONLY	Y10T152/10882		214
Y10T152/10891	10	Mechanically secured	CPCONLY	Y10T152/10891		43
Y10T152/109	11	Inside and outside, bolt connected	CPCONLY	Y10T152/109		73
Y10T152/10909	10	with plugs	CPCONLY	Y10T152/10909		206
Y10T152/10918	10	Bandages	CPCONLY	Y10T152/10918		72
Y10T152/10927	11	Mechanically secured	CPCONLY	Y10T152/10927		95
Y10T152/10936	12	to felly or rim	CPCONLY	Y10T152/10936		62
Y10T156/00	7	Adhesive bonding and miscellaneous chemical manufacture	CPCONLY	Y10T156/00		2
Y10T156/10	8	Methods of surface bonding and/or assembly therefor	CPCONLY	Y10T156/10		6097
Y10T156/1002	9	with permanent bending or reshaping or surface deformation of self sustaining lamina	CPCONLY	Y10T156/1002		1217
Y10T156/1003	10	by separating laminae between spaced secured areas [e.g., honeycomb expanding]	CPCONLY	Y10T156/1003		488
Y10T156/1005	10	by inward collapsing of portion of hollow body	CPCONLY	Y10T156/1005		220
Y10T156/1007	10	Running or continuous length work	CPCONLY	Y10T156/1007		268
Y10T156/1008	11	Longitudinal bending	CPCONLY	Y10T156/1008		246
Y10T156/101	12	Prior to or during assembly with additional lamina	CPCONLY	Y10T156/101		375
Y10T156/1011	12	Overedge bending or overedge folding	CPCONLY	Y10T156/1011		334
Y10T156/1013	12	and edge-joining of one piece blank to form tube	CPCONLY	Y10T156/1013		363
Y10T156/1015	11	Folding	CPCONLY	Y10T156/1015		621
Y10T156/1016	11	Transverse corrugating	CPCONLY	Y10T156/1016		426
Y10T156/1018	12	Subsequent to assembly of laminae	CPCONLY	Y10T156/1018		100
Y10T156/102	12	with deformation or cutting of corrugated lamina	CPCONLY	Y10T156/102		148
Y10T156/1021	12	Treating material of corrugated lamina or dry adhesive thereon to render tacky	CPCONLY	Y10T156/1021		61
Y10T156/1023	11	Surface deformation only [e.g., embossing]	CPCONLY	Y10T156/1023		925
Y10T156/1025	10	to form undulated to corrugated sheet and securing to base with parts of shaped areas out of contact	CPCONLY	Y10T156/1025		663
Y10T156/1026	10	with slitting or removal of material at reshaping area prior to reshaping	CPCONLY	Y10T156/1026		374
Y10T156/1028	10	by bending, drawing or stretch forming sheet to assume shape of configured lamina while in contact therewith	CPCONLY	Y10T156/1028		1035
Y10T156/103	11	Encasing or enveloping the configured lamina	CPCONLY	Y10T156/103		634
Y10T156/1031	11	with preshaping of lamina	CPCONLY	Y10T156/1031		362
Y10T156/1033	11	Flexible sheet to cylinder lamina	CPCONLY	Y10T156/1033		479
Y10T156/1034	10	Overedge bending of lamina about edges of sheetlike base	CPCONLY	Y10T156/1034		600
Y10T156/1036	10	Bending of one piece blank and joining edges to form article	CPCONLY	Y10T156/1036		376
Y10T156/1038	11	Hollow cylinder article	CPCONLY	Y10T156/1038		624
Y10T156/1039	10	Surface deformation only of sandwich or lamina [e.g., embossed panels]	CPCONLY	Y10T156/1039		943
Y10T156/1041	11	Subsequent to lamination	CPCONLY	Y10T156/1041		674
Y10T156/1043	10	Subsequent to assembly	CPCONLY	Y10T156/1043		670
Y10T156/1044	11	of parallel stacked sheets only	CPCONLY	Y10T156/1044		637
Y10T156/1046	12	Bending of one lamina only	CPCONLY	Y10T156/1046		138
Y10T156/1048	12	to form dished or receptacle-like product	CPCONLY	Y10T156/1048		344
Y10T156/1049	11	Folding only	CPCONLY	Y10T156/1049		330
Y10T156/1051	10	by folding	CPCONLY	Y10T156/1051		1195
Y10T156/1052	9	with cutting, punching, tearing or severing	CPCONLY	Y10T156/1052		2613
Y10T156/1054	10	and simultaneously bonding [e.g., cut-seaming]	CPCONLY	Y10T156/1054		861
Y10T156/1056	10	Perforating lamina	CPCONLY	Y10T156/1056		1417
Y10T156/1057	11	Subsequent to assembly of laminae	CPCONLY	Y10T156/1057		1015
Y10T156/1059	10	Splitting sheet lamina in plane intermediate of faces	CPCONLY	Y10T156/1059		366
Y10T156/1061	10	Spiral peeling	CPCONLY	Y10T156/1061		59
Y10T156/1062	10	Prior to assembly	CPCONLY	Y10T156/1062		1610
Y10T156/1064	11	Partial cutting [e.g., grooving or incising]	CPCONLY	Y10T156/1064		1054
Y10T156/1066	11	Cutting to shape joining edge surfaces only	CPCONLY	Y10T156/1066		568
Y10T156/1067	11	Continuous longitudinal slitting	CPCONLY	Y10T156/1067		345
Y10T156/1069	12	Bonding face to face of laminae cut from single sheet	CPCONLY	Y10T156/1069		156
Y10T156/107	11	Punching and bonding pressure application by punch	CPCONLY	Y10T156/107		210
Y10T156/1072	12	Closure cap liner applying type	CPCONLY	Y10T156/1072		89
Y10T156/1074	11	Separate cutting of separate sheets or webs	CPCONLY	Y10T156/1074		309
Y10T156/1075	11	of plural laminae from single stock and assembling to each other or to additional lamina	CPCONLY	Y10T156/1075		1132
Y10T156/1077	12	Applying plural cut laminae to single face of additional lamina	CPCONLY	Y10T156/1077		653
Y10T156/1079	12	Joining of cut laminae end-to-end	CPCONLY	Y10T156/1079		201
Y10T156/108	10	Flash, trim or excess removal	CPCONLY	Y10T156/108		1267
Y10T156/1082	10	Partial cutting bonded sandwich [e.g., grooving or incising]	CPCONLY	Y10T156/1082		933
Y10T156/1084	10	of continuous or running length bonded web	CPCONLY	Y10T156/1084		806
Y10T156/1085	11	One web only	CPCONLY	Y10T156/1085		498
Y10T156/1087	11	Continuous longitudinal slitting	CPCONLY	Y10T156/1087		344
Y10T156/1089	9	of discrete laminae to single face of additional lamina	CPCONLY	Y10T156/1089		1123
Y10T156/109	10	Embedding of laminae within face of additional laminae	CPCONLY	Y10T156/109		546
Y10T156/1092	10	All laminae planar and face to face	CPCONLY	Y10T156/1092		813
Y10T156/1093	11	with covering of discrete laminae with additional lamina	CPCONLY	Y10T156/1093		485
Y10T156/1095	12	Opposed laminae are running length webs	CPCONLY	Y10T156/1095		230
Y10T156/1097	11	Lamina is running length web	CPCONLY	Y10T156/1097		318
Y10T156/1098	12	Feeding of discrete laminae from separate sources	CPCONLY	Y10T156/1098		115
Y10T156/11	8	Methods of delaminating, per se; i.e. , separating at bonding face	CPCONLY	Y10T156/11		594
Y10T156/1105	9	Delaminating process responsive to feed or shape at delamination	CPCONLY	Y10T156/1105		81
Y10T156/1111	9	Using solvent during delaminating [e.g., water dissolving adhesive at bonding face during delamination, etc.]	CPCONLY	Y10T156/1111		210
Y10T156/1116	10	Using specified organic delamination solvent	CPCONLY	Y10T156/1116		99
Y10T156/1121	9	Using vibration during delaminating	CPCONLY	Y10T156/1121		47
Y10T156/1126	9	Using direct fluid current against work during delaminating	CPCONLY	Y10T156/1126		91
Y10T156/1132	10	Using vacuum directly against work during delaminating	CPCONLY	Y10T156/1132		198
Y10T156/1137	10	Using air blast directly against work during delaminating	CPCONLY	Y10T156/1137		68
Y10T156/1142	9	Changing dimension during delaminating [e.g., crushing, expanding, warping, etc.]	CPCONLY	Y10T156/1142		92
Y10T156/1147	10	Using shrinking or swelling agent during delaminating	CPCONLY	Y10T156/1147		37
Y10T156/1153	9	Temperature change for delamination [e.g., heating during delaminating, etc.]	CPCONLY	Y10T156/1153		302
Y10T156/1158	10	Electromagnetic radiation applied to work for delamination [e.g., microwave, uv, ir, etc.]	CPCONLY	Y10T156/1158		223
Y10T156/1163	10	Sintering for delamination	CPCONLY	Y10T156/1163		8
Y10T156/1168	9	Gripping and pulling work apart during delaminating	CPCONLY	Y10T156/1168		477
Y10T156/1174	10	Using roller for delamination [e.g., roller pairs operating at differing speeds or directions, etc.]	CPCONLY	Y10T156/1174		185
Y10T156/1179	10	with poking during delaminating [e.g., jabbing, etc.]	CPCONLY	Y10T156/1179		168
Y10T156/1184	11	Piercing layer during delaminating [e.g., cutting, etc.]	CPCONLY	Y10T156/1184		233
Y10T156/1189	10	with shearing during delaminating	CPCONLY	Y10T156/1189		158
Y10T156/1195	10	Delaminating from release surface	CPCONLY	Y10T156/1195		279
Y10T156/12	8	Surface bonding means and/or assembly means with cutting, punching, piercing, severing or tearing	CPCONLY	Y10T156/12		1448
Y10T156/125	9	Plural severing means each acting on a different work piece	CPCONLY	Y10T156/125		198
Y10T156/13	9	Severing followed by associating with part from same source	CPCONLY	Y10T156/13		394
Y10T156/1304	9	Means making hole or aperture in part to be laminated	CPCONLY	Y10T156/1304		362
Y10T156/1309	10	and securing separate part over hole or aperture	CPCONLY	Y10T156/1309		248
Y10T156/1313	9	Cutting element simultaneously bonds [e.g., cut seaming]	CPCONLY	Y10T156/1313		705
Y10T156/1317	9	Means feeding plural workpieces to be joined	CPCONLY	Y10T156/1317		402
Y10T156/1322	10	Severing before bonding or assembling of parts	CPCONLY	Y10T156/1322		664
Y10T156/1326	11	Severing means or member secured thereto also bonds	CPCONLY	Y10T156/1326		269
Y10T156/133	11	Delivering cut part to indefinite or running length web	CPCONLY	Y10T156/133		473
Y10T156/1335	12	Cutter also delivers cut piece	CPCONLY	Y10T156/1335		139
Y10T156/1339	11	Delivering cut part in sequence to serially conveyed articles	CPCONLY	Y10T156/1339		695
Y10T156/1343	10	Cutting indefinite length web after assembly with discrete article	CPCONLY	Y10T156/1343		797
Y10T156/1348	9	Work traversing type	CPCONLY	Y10T156/1348		592
Y10T156/1352	10	with liquid applying means	CPCONLY	Y10T156/1352		76
Y10T156/1357	11	Slitting and severing	CPCONLY	Y10T156/1357		57
Y10T156/1361	11	Cutting after bonding	CPCONLY	Y10T156/1361		174
Y10T156/1365	10	Fixed cutter	CPCONLY	Y10T156/1365		274
Y10T156/137	9	Stamp from multiple row sheet type	CPCONLY	Y10T156/137		69
Y10T156/1374	9	with means projecting fluid against work	CPCONLY	Y10T156/1374		93
Y10T156/1378	9	Cutter actuated by or secured to bonding element	CPCONLY	Y10T156/1378		281
Y10T156/1383	10	with liquid applicator	CPCONLY	Y10T156/1383		78
Y10T156/1387	11	Common actuator for bonding and liquid applying means	CPCONLY	Y10T156/1387		48
Y10T156/1391	12	Liquid applied to web before cutting	CPCONLY	Y10T156/1391		59
Y10T156/1396	13	Roller applicator	CPCONLY	Y10T156/1396		50
Y10T156/14	8	Surface bonding means and/or assembly means with shaping, scarifying, or cleaning joining surface only	CPCONLY	Y10T156/14		128
Y10T156/15	8	Combined or convertible surface bonding means and/or assembly means	CPCONLY	Y10T156/15		154
Y10T156/16	8	Surface bonding means and/or assembly means with bond interfering means [slip sheet, etc. ]	CPCONLY	Y10T156/16		130
Y10T156/17	8	Surface bonding means and/or assemblymeans with work feeding or handling means	CPCONLY	Y10T156/17		1062
Y10T156/1702	9	For plural parts or plural areas of single part	CPCONLY	Y10T156/1702		366
Y10T156/1705	10	Lamina transferred to base from adhered flexible web or sheet type carrier	CPCONLY	Y10T156/1705		655
Y10T156/1707	11	Discrete spaced laminae on adhered carrier	CPCONLY	Y10T156/1707		477
Y10T156/171	12	Means serially presenting discrete base articles or separate portions of a single article	CPCONLY	Y10T156/171		578
Y10T156/1712	10	Indefinite or running length work	CPCONLY	Y10T156/1712		383
Y10T156/1715	11	Means joining indefinite length work edge to edge	CPCONLY	Y10T156/1715		169
Y10T156/1717	12	Means applying adhesively secured tape to seam	CPCONLY	Y10T156/1717		95
Y10T156/172	12	Means applying fluid adhesive to work edge	CPCONLY	Y10T156/172		92
Y10T156/1722	11	Means applying fluent adhesive or adhesive activator material between layers	CPCONLY	Y10T156/1722		196
Y10T156/1724	12	At spaced areas	CPCONLY	Y10T156/1724		219
Y10T156/1727	12	Plural indefinite length or running length workpieces	CPCONLY	Y10T156/1727		275
Y10T156/1729	13	Fluid applied to nip between indefinite length webs	CPCONLY	Y10T156/1729		88
Y10T156/1732	13	Fluid applied to plural workpieces	CPCONLY	Y10T156/1732		144
Y10T156/1734	11	Means bringing articles into association with web	CPCONLY	Y10T156/1734		839
Y10T156/1737	11	Discontinuous, spaced area, and/or patterned pressing	CPCONLY	Y10T156/1737		363
Y10T156/1739	11	Webs of different width, longitudinally aligned	CPCONLY	Y10T156/1739		248
Y10T156/1741	11	Progressive continuous bonding press [e.g., roll couples]	CPCONLY	Y10T156/1741		927
Y10T156/1744	10	Means bringing discrete articles into assembled relationship	CPCONLY	Y10T156/1744		1332
Y10T156/1746	11	Plural lines and/or separate means assembling separate sandwiches	CPCONLY	Y10T156/1746		160
Y10T156/1749	11	All articles from single source only	CPCONLY	Y10T156/1749		256
Y10T156/1751	11	At least three articles	CPCONLY	Y10T156/1751		223
Y10T156/1754	12	At least two applied side by side to common base	CPCONLY	Y10T156/1754		167
Y10T156/1756	13	Plural ranks	CPCONLY	Y10T156/1756		101
Y10T156/1759	13	Sheet form common base	CPCONLY	Y10T156/1759		139
Y10T156/1761	12	Stacked serially	CPCONLY	Y10T156/1761		189
Y10T156/1763	11	Magazine stack directly contacting separate work	CPCONLY	Y10T156/1763		88
Y10T156/1766	12	Magazine movable to work	CPCONLY	Y10T156/1766		89
Y10T156/1768	11	Means simultaneously conveying plural articles from a single source and serially presenting them to an assembly station	CPCONLY	Y10T156/1768		692
Y10T156/1771	12	Turret or rotary drum-type conveyor	CPCONLY	Y10T156/1771		474
Y10T156/1773	13	For flexible sheets	CPCONLY	Y10T156/1773		348
Y10T156/1776	11	Means separating articles from bulk source	CPCONLY	Y10T156/1776		134
Y10T156/1778	12	Stacked sheet source	CPCONLY	Y10T156/1778		193
Y10T156/178	13	Rotary or pivoted picker	CPCONLY	Y10T156/178		473
Y10T156/1783	13	Translating picker	CPCONLY	Y10T156/1783		222
Y10T156/1785	9	Magazine stack directly contacting work	CPCONLY	Y10T156/1785		136
Y10T156/1788	9	Work traversing type and/or means applying work to wall or static structure	CPCONLY	Y10T156/1788		651
Y10T156/179	10	with liquid applying means	CPCONLY	Y10T156/179		324
Y10T156/1793	10	Grip or clamp for web end	CPCONLY	Y10T156/1793		166
Y10T156/1795	10	Implement carried web supply	CPCONLY	Y10T156/1795		1150
Y10T156/1798	9	with liquid adhesive or adhesive activator applying means	CPCONLY	Y10T156/1798		1324
Y10T156/18	8	Surface bonding means and/or assembly means with handle or handgrip	CPCONLY	Y10T156/18		1146
Y10T156/19	8	Delaminating means	CPCONLY	Y10T156/19		469
Y10T156/1906	9	Delaminating means responsive to feed or shape at delamination	CPCONLY	Y10T156/1906		171
Y10T156/1911	9	Heating or cooling delaminating means [e.g., melting means, freezing means, etc.]	CPCONLY	Y10T156/1911		208
Y10T156/1917	10	Electromagnetic radiation delaminating means [e.g., microwave, uv, ir, etc.]	CPCONLY	Y10T156/1917		112
Y10T156/1922	9	Vibrating delaminating means	CPCONLY	Y10T156/1922		56
Y10T156/1928	9	Differential fluid pressure delaminating means	CPCONLY	Y10T156/1928		79
Y10T156/1933	10	Spraying delaminating means [e.g., atomizer, etc.	CPCONLY	Y10T156/1933		41
Y10T156/1939	11	Air blasting delaminating means]	CPCONLY	Y10T156/1939		69
Y10T156/1944	10	Vacuum delaminating means [e.g., vacuum chamber, etc.]	CPCONLY	Y10T156/1944		195
Y10T156/195	9	Delaminating roller means	CPCONLY	Y10T156/195		180
Y10T156/1956	10	Roller pair delaminating means	CPCONLY	Y10T156/1956		118
Y10T156/1961	9	Severing delaminating means [e.g., chisel, etc.]	CPCONLY	Y10T156/1961		136
Y10T156/1967	10	Cutting delaminating means	CPCONLY	Y10T156/1967		174
Y10T156/1972	11	Shearing delaminating means	CPCONLY	Y10T156/1972		229
Y10T156/1978	9	Delaminating bending means	CPCONLY	Y10T156/1978		284
Y10T156/1983	10	Poking delaminating means	CPCONLY	Y10T156/1983		179
Y10T156/1989	10	Corner edge bending delaminating means	CPCONLY	Y10T156/1989		71
Y10T156/1994	9	Means for delaminating from release surface	CPCONLY	Y10T156/1994		255
Y10T225/00	7	Severing by tearing or breaking	CPCONLY	Y10T225/00		
Y10T225/10	8	Methods	CPCONLY	Y10T225/10		349
Y10T225/12	9	With preliminary weakening	CPCONLY	Y10T225/12		860
Y10T225/14	9	Longitudinally of direction of feed	CPCONLY	Y10T225/14		145
Y10T225/16	9	Transversely of continuously fed work	CPCONLY	Y10T225/16		156
Y10T225/18	10	Progressively to or from one side edge	CPCONLY	Y10T225/18		38
Y10T225/20	8	Severing by manually forcing against fixed edge	CPCONLY	Y10T225/20		171
Y10T225/201	9	With other type severing means	CPCONLY	Y10T225/201		44
Y10T225/202	9	With timer-released means for preventing work feed-out	CPCONLY	Y10T225/202		28
Y10T225/203	9	Including means to effect bias cut	CPCONLY	Y10T225/203		19
Y10T225/205	9	With feed-out of predetermined length from work supply	CPCONLY	Y10T225/205		63
Y10T225/206	10	Including means to select or adjust feed-out length	CPCONLY	Y10T225/206		83
Y10T225/207	10	Including feed-out stop for manually pulled work	CPCONLY	Y10T225/207		43
Y10T225/208	11	Stop abuts work edge or work-mounted article	CPCONLY	Y10T225/208		30
Y10T225/209	11	With feed-out of lead-end to aid initial grasping	CPCONLY	Y10T225/209		81
Y10T225/21	10	Merely to provide lead-end for manual grasping	CPCONLY	Y10T225/21		54
Y10T225/211	10	Manually operated feed-out mechanism	CPCONLY	Y10T225/211		130
Y10T225/213	9	With indicator	CPCONLY	Y10T225/213		39
Y10T225/214	10	Indicates length to be severed from supply	CPCONLY	Y10T225/214		39
Y10T225/215	9	With blade-edge guard	CPCONLY	Y10T225/215		98
Y10T225/216	10	Movable	CPCONLY	Y10T225/216		79
Y10T225/217	9	Work stripped from blade by relatively movable means	CPCONLY	Y10T225/217		50
Y10T225/218	10	Including movable blade	CPCONLY	Y10T225/218		27
Y10T225/22	9	With means to move work toward or into severing position	CPCONLY	Y10T225/22		135
Y10T225/221	10	With means to strip adhering work therefrom	CPCONLY	Y10T225/221		33
Y10T225/222	9	With work-immobilizing paster surface	CPCONLY	Y10T225/222		137
Y10T225/223	10	With finger-access opening	CPCONLY	Y10T225/223		43
Y10T225/224	9	With means to hold pad or stack of individual sheets	CPCONLY	Y10T225/224		59
Y10T225/225	10	With means to separate severed end of stub from supply package	CPCONLY	Y10T225/225		33
Y10T225/226	10	With changeable blade-edge contour	CPCONLY	Y10T225/226		13
Y10T225/228	11	Slidable notcher	CPCONLY	Y10T225/228		33
Y10T225/229	10	Blade slidable along plane of work surface	CPCONLY	Y10T225/229		57
Y10T225/23	9	Zigzag-folded supply package	CPCONLY	Y10T225/23		63
Y10T225/231	9	Separate blades usable alternatively or sequentially on same work supply	CPCONLY	Y10T225/231		109
Y10T225/232	9	Plural supply sources	CPCONLY	Y10T225/232		147
Y10T225/233	10	On turret-type support with single blade	CPCONLY	Y10T225/233		16
Y10T225/234	10	With movable blade registrable selectively with each source	CPCONLY	Y10T225/234		7
Y10T225/236	10	With plural blades	CPCONLY	Y10T225/236		31
Y10T225/237	11	With individual blade for each source	CPCONLY	Y10T225/237		150
Y10T225/238	9	With housing for work supply	CPCONLY	Y10T225/238		163
Y10T225/239	10	Liquid-, gas-, or light-tight work passage	CPCONLY	Y10T225/239		19
Y10T225/24	10	With inspection window or transparent panel	CPCONLY	Y10T225/24		59
Y10T225/241	10	With mounting means for housing	CPCONLY	Y10T225/241		166
Y10T225/243	10	Blade on pivoted closure for housing	CPCONLY	Y10T225/243		207
Y10T225/244	10	Sectional telescoping housing	CPCONLY	Y10T225/244		101
Y10T225/245	11	Including removable cap or sleeve enclosure for spooled work supply	CPCONLY	Y10T225/245		31
Y10T225/246	10	Including special support for wound supply package	CPCONLY	Y10T225/246		176
Y10T225/247	11	Bearing or trunnions to engage package core	CPCONLY	Y10T225/247		363
Y10T225/248	10	Single blank container	CPCONLY	Y10T225/248		143
Y10T225/249	11	Blade unitary with container	CPCONLY	Y10T225/249		87
Y10T225/251	11	With closure fastener	CPCONLY	Y10T225/251		40
Y10T225/252	10	With brake or tensioner	CPCONLY	Y10T225/252		168
Y10T225/253	11	Restricted or restrictable work outlet	CPCONLY	Y10T225/253		186
Y10T225/254	10	With finger-access opening to facilitate work feed-out	CPCONLY	Y10T225/254		166
Y10T225/255	10	With internal guide	CPCONLY	Y10T225/255		137
Y10T225/256	9	Blade carrier bodily and slidably supported on running length work	CPCONLY	Y10T225/256		18
Y10T225/257	9	Blade mounted on hand-held wound package	CPCONLY	Y10T225/257		116
Y10T225/259	10	With lead-end stripper for tacky adhesive work	CPCONLY	Y10T225/259		18
Y10T225/26	10	By resiliently embracing outer circumference of package	CPCONLY	Y10T225/26		24
Y10T225/261	10	Work supply nonrotatably wound on flanged spool	CPCONLY	Y10T225/261		24
Y10T225/262	11	Circumferentially movable blade radially retained by beaded or grooved flanges	CPCONLY	Y10T225/262		19
Y10T225/263	11	Blade carrier supports hollow spool for rotation	CPCONLY	Y10T225/263		37
Y10T225/264	11	Flange edge notched to provide or coact with cutter	CPCONLY	Y10T225/264		8
Y10T225/266	11	With clamp for lead-end of strand-type work	CPCONLY	Y10T225/266		27
Y10T225/267	12	Strand clamped against flange	CPCONLY	Y10T225/267		17
Y10T225/268	10	By resiliently engaging package ends or interior of core	CPCONLY	Y10T225/268		75
Y10T225/269	10	Blade carrier supports package for rotation	CPCONLY	Y10T225/269		119
Y10T225/27	9	Movable blade continually biased toward wound web supply package	CPCONLY	Y10T225/27		110
Y10T225/271	10	Including temporary bias-disabling means	CPCONLY	Y10T225/271		28
Y10T225/272	10	Including stripper to separate lead-end from package	CPCONLY	Y10T225/272		18
Y10T225/274	10	Weight of bodily movable package contributes to blade-biasing force	CPCONLY	Y10T225/274		20
Y10T225/275	10	Blade slidably guided	CPCONLY	Y10T225/275		68
Y10T225/276	9	Blade movable to severing position by moving work	CPCONLY	Y10T225/276		58
Y10T225/277	10	With simultaneous application of brake or clamp	CPCONLY	Y10T225/277		35
Y10T225/278	11	Applied to running length work	CPCONLY	Y10T225/278		36
Y10T225/279	12	Opposed movable jaws	CPCONLY	Y10T225/279		9
Y10T225/28	9	Wound package bodily biased toward fixed blade	CPCONLY	Y10T225/28		39
Y10T225/282	9	With fixed blade and support for wound package	CPCONLY	Y10T225/282		272
Y10T225/283	10	Body- or belt-attached	CPCONLY	Y10T225/283		45
Y10T225/284	10	With brake applied to supply package	CPCONLY	Y10T225/284		51
Y10T225/285	10	With guide spaced from blade edge to provide lead-end therebetween	CPCONLY	Y10T225/285		107
Y10T225/286	9	With work-abutment stop	CPCONLY	Y10T225/286		23
Y10T225/287	9	With brake or clamp	CPCONLY	Y10T225/287		99
Y10T225/289	10	Thread cutter and clamp attachment for sewing machine presser foot	CPCONLY	Y10T225/289		10
Y10T225/29	10	Applied to running length work	CPCONLY	Y10T225/29		84
Y10T225/291	11	Spaced from blade edge to provide lead-end therebetween	CPCONLY	Y10T225/291		126
Y10T225/292	12	Blade manually movable to expose lead-end	CPCONLY	Y10T225/292		19
Y10T225/293	10	Manually applied, spring returned	CPCONLY	Y10T225/293		27
Y10T225/294	9	With guide for running length work	CPCONLY	Y10T225/294		165
Y10T225/295	9	Blade manually movable to or from severing position	CPCONLY	Y10T225/295		187
Y10T225/297	9	With means to facilitate lead-end grasping	CPCONLY	Y10T225/297		229
Y10T225/298	9	Blades or severing devices	CPCONLY	Y10T225/298		290
Y10T225/299	10	Adjustable blade-edge contour	CPCONLY	Y10T225/299		22
Y10T225/30	8	Breaking or tearing apparatus	CPCONLY	Y10T225/30		496
Y10T225/304	9	Including means to apply thermal shock to work	CPCONLY	Y10T225/304		232
Y10T225/307	9	Combined with preliminary weakener or with nonbreaking cutter	CPCONLY	Y10T225/307		143
Y10T225/314	10	Successively actuated sharp and dull tools	CPCONLY	Y10T225/314		25
Y10T225/321	10	Preliminary weakener	CPCONLY	Y10T225/321		449
Y10T225/325	11	With means to apply moment of force to weakened work	CPCONLY	Y10T225/325		626
Y10T225/329	9	Plural breakers	CPCONLY	Y10T225/329		359
Y10T225/336	9	Conveyor diverter for moving work	CPCONLY	Y10T225/336		84
Y10T225/343	10	Plural divergent work paths	CPCONLY	Y10T225/343		105
Y10T225/35	9	Work-parting pullers [bursters]	CPCONLY	Y10T225/35		355
Y10T225/357	10	Relatively movable clamps	CPCONLY	Y10T225/357		151
Y10T225/364	9	Axial twisters	CPCONLY	Y10T225/364		55
Y10T225/371	9	Movable breaking tool	CPCONLY	Y10T225/371		711
Y10T225/379	10	Breaking tool intermediate spaced work supports	CPCONLY	Y10T225/379		158
Y10T225/386	11	Clamping supports	CPCONLY	Y10T225/386		108
Y10T225/393	9	Web restrainer	CPCONLY	Y10T225/393		339
Y10T279/00	7	Chucks or sockets	CPCONLY	Y10T279/00		
Y10T279/10	8	Expanding	CPCONLY	Y10T279/10		81
Y10T279/1004	9	Collet type	CPCONLY	Y10T279/1004		72
Y10T279/1008	10	Fixed jaws and moving cam	CPCONLY	Y10T279/1008		159
Y10T279/1012	10	Fixed cam and moving jaws	CPCONLY	Y10T279/1012		64
Y10T279/1016	9	Jaws mounted on flexible member; i.e., diaphragm	CPCONLY	Y10T279/1016		43
Y10T279/1021	9	Fluid-pressure actuator	CPCONLY	Y10T279/1021		25
Y10T279/1024	10	Directly expanding jaws	CPCONLY	Y10T279/1024		61
Y10T279/1029	11	Jaw is expansible chamber; i.e., bladder type	CPCONLY	Y10T279/1029		95
Y10T279/1033	10	Expanding jaws via mechanical connection	CPCONLY	Y10T279/1033		118
Y10T279/1037	9	Axially moving actuator	CPCONLY	Y10T279/1037		53
Y10T279/1041	10	Wedge	CPCONLY	Y10T279/1041		138
Y10T279/1045	11	Internal cone	CPCONLY	Y10T279/1045		297
Y10T279/1049	11	with jaw positively interlocked with wedge; e.g., dovetail or T-slot	CPCONLY	Y10T279/1049		49
Y10T279/1054	11	with resilient means contacting nonresilient jaw	CPCONLY	Y10T279/1054		76
Y10T279/1058	12	Constricting band, annulus, or clip	CPCONLY	Y10T279/1058		106
Y10T279/1062	10	Toggle	CPCONLY	Y10T279/1062		25
Y10T279/1066	10	Axially compressible element expands radially	CPCONLY	Y10T279/1066		98
Y10T279/1071	10	Lever	CPCONLY	Y10T279/1071		39
Y10T279/1074	9	Rotary actuator	CPCONLY	Y10T279/1074		101
Y10T279/1079	10	Clutch or self-actuating type	CPCONLY	Y10T279/1079		51
Y10T279/1083	9	Jaw structure	CPCONLY	Y10T279/1083		28
Y10T279/1087	10	Resilient	CPCONLY	Y10T279/1087		65
Y10T279/1091	10	Ball or roller	CPCONLY	Y10T279/1091		59
Y10T279/1095	10	Pivoted	CPCONLY	Y10T279/1095		91
Y10T279/11	8	Vacuum	CPCONLY	Y10T279/11		421
Y10T279/12	8	with fluid-pressure actuator	CPCONLY	Y10T279/12		128
Y10T279/1208	9	with measuring, indicating or control means	CPCONLY	Y10T279/1208		98
Y10T279/1216	9	Jaw is expansible chamber; i.e., bladder type	CPCONLY	Y10T279/1216		112
Y10T279/1224	9	Pneumatic type	CPCONLY	Y10T279/1224		105
Y10T279/1233	9	Jaws mounted on flexible member; i.e., diaphragm	CPCONLY	Y10T279/1233		53
Y10T279/1241	9	Socket type	CPCONLY	Y10T279/1241		147
Y10T279/1249	10	Collet	CPCONLY	Y10T279/1249		60
Y10T279/1258	11	Fixed cam and moving jaws	CPCONLY	Y10T279/1258		89
Y10T279/1266	11	Moving cam and fixed jaws	CPCONLY	Y10T279/1266		90
Y10T279/1274	9	Radially reciprocating jaws	CPCONLY	Y10T279/1274		13
Y10T279/1283	10	Fluid pressure directly moves jaws	CPCONLY	Y10T279/1283		80
Y10T279/1291	10	Fluid pressure moves jaws via mechanical connection	CPCONLY	Y10T279/1291		238
Y10T279/13	8	Angularly adjustable or indexing	CPCONLY	Y10T279/13		212
Y10T279/14	8	Eccentric	CPCONLY	Y10T279/14		377
Y10T279/15	8	Threaded grip	CPCONLY	Y10T279/15		166
Y10T279/16	8	Longitudinal screw clamp	CPCONLY	Y10T279/16		278
Y10T279/17	8	Socket type	CPCONLY	Y10T279/17		353
Y10T279/17008	9	Multiple alternative	CPCONLY	Y10T279/17008		112
Y10T279/17017	9	Self-centering of floating	CPCONLY	Y10T279/17017		397
Y10T279/17025	10	Radially reciprocating jaws	CPCONLY	Y10T279/17025		24
Y10T279/17034	10	Transverse holder and setscrew	CPCONLY	Y10T279/17034		38
Y10T279/17042	9	Lost motion	CPCONLY	Y10T279/17042		172
Y10T279/17051	10	Swinging external yoke or detent	CPCONLY	Y10T279/17051		166
Y10T279/17059	11	Rotary socket	CPCONLY	Y10T279/17059		34
Y10T279/17068	10	Rotary socket	CPCONLY	Y10T279/17068		136
Y10T279/17076	10	Spreading elements	CPCONLY	Y10T279/17076		96
Y10T279/17085	10	Key retainer	CPCONLY	Y10T279/17085		123
Y10T279/17094	10	Sleeve type retainer	CPCONLY	Y10T279/17094		126
Y10T279/17102	11	Sleeve in socket	CPCONLY	Y10T279/17102		50
Y10T279/17111	9	Fluid-conduit drill holding	CPCONLY	Y10T279/17111		298
Y10T279/17119	9	Feed type	CPCONLY	Y10T279/17119		113
Y10T279/17128	9	Self-grasping	CPCONLY	Y10T279/17128		
Y10T279/17136	10	Yielding grasping jaws	CPCONLY	Y10T279/17136		
Y10T279/17145	11	Ball or roller	CPCONLY	Y10T279/17145		160
Y10T279/17153	11	Spring jaws	CPCONLY	Y10T279/17153		156
Y10T279/17162	10	Yielding detent	CPCONLY	Y10T279/17162		90
Y10T279/17171	10	One-way-clutch type	CPCONLY	Y10T279/17171		
Y10T279/17179	11	Wedge	CPCONLY	Y10T279/17179		144
Y10T279/17188	11	Side detent	CPCONLY	Y10T279/17188		100
Y10T279/17196	12	Ball or roller	CPCONLY	Y10T279/17196		166
Y10T279/17205	9	Conical clamp threaded in socket	CPCONLY	Y10T279/17205		28
Y10T279/17213	9	Transversely oscillating jaws	CPCONLY	Y10T279/17213		161
Y10T279/17222	10	Screw actuated	CPCONLY	Y10T279/17222		36
Y10T279/17231	9	Pivoted jaws	CPCONLY	Y10T279/17231		195
Y10T279/17239	10	Moving-cam actuator	CPCONLY	Y10T279/17239		
Y10T279/17247	11	Threaded cam sleeve	CPCONLY	Y10T279/17247		131
Y10T279/17256	11	Reciprocating cam sleeve	CPCONLY	Y10T279/17256		96
Y10T279/17264	10	Fixed cam and moving jaws	CPCONLY	Y10T279/17264		44
Y10T279/17273	11	Axial screw actuator	CPCONLY	Y10T279/17273		72
Y10T279/17282	11	Threaded-sleeve actuator	CPCONLY	Y10T279/17282		16
Y10T279/17291	9	Resilient split socket	CPCONLY	Y10T279/17291		
Y10T279/17299	10	Threaded cam sleeve	CPCONLY	Y10T279/17299		259
Y10T279/17307	10	Reciprocating cam sleeve	CPCONLY	Y10T279/17307		143
Y10T279/17316	10	Unitary	CPCONLY	Y10T279/17316		44
Y10T279/17324	11	Split at one end only	CPCONLY	Y10T279/17324		68
Y10T279/17333	12	Transverse screw actuator	CPCONLY	Y10T279/17333		64
Y10T279/17341	12	Cam actuator	CPCONLY	Y10T279/17341		49
Y10T279/17351	11	Split end to end	CPCONLY	Y10T279/17351		49
Y10T279/17358	11	with jaw pads or insert	CPCONLY	Y10T279/17358		48
Y10T279/17367	10	Nonresilient member biased by a resilient member	CPCONLY	Y10T279/17367		22
Y10T279/17376	10	Resilient member reinforced by another resilient member	CPCONLY	Y10T279/17376		17
Y10T279/17384	9	with means to exclude contaminants; e.g., seal, shield	CPCONLY	Y10T279/17384		22
Y10T279/17393	9	One movable side	CPCONLY	Y10T279/17393		149
Y10T279/17401	10	Sleeved	CPCONLY	Y10T279/17401		33
Y10T279/17411	9	Spring biased jaws	CPCONLY	Y10T279/17411		60
Y10T279/17418	10	Unitary	CPCONLY	Y10T279/17418		73
Y10T279/17427	11	Split at one end only	CPCONLY	Y10T279/17427		139
Y10T279/17435	11	Split at both ends	CPCONLY	Y10T279/17435		76
Y10T279/17444	11	Split end to end	CPCONLY	Y10T279/17444		40
Y10T279/17452	11	with jaw pads or insert	CPCONLY	Y10T279/17452		42
Y10T279/17461	10	Nonresilient member biased by a resilient member	CPCONLY	Y10T279/17461		177
Y10T279/17471	10	Resilient member reinforced by another resilient member	CPCONLY	Y10T279/17471		48
Y10T279/17478	10	with means to exclude contaminants; e.g., seal, shield	CPCONLY	Y10T279/17478		65
Y10T279/17487	10	Moving-cam actuator	CPCONLY	Y10T279/17487		
Y10T279/17495	11	Threaded sleeve and wedge	CPCONLY	Y10T279/17495		69
Y10T279/17504	11	Threaded cam sleeve	CPCONLY	Y10T279/17504		164
Y10T279/17512	12	Loose jaws	CPCONLY	Y10T279/17512		109
Y10T279/17521	11	Reciprocating cam sleeve	CPCONLY	Y10T279/17521		271
Y10T279/17529	10	Fixed cam and moving jaws	CPCONLY	Y10T279/17529		527
Y10T279/17538	11	Threaded-sleeve actuator	CPCONLY	Y10T279/17538		129
Y10T279/17547	11	Axial screw actuator	CPCONLY	Y10T279/17547		213
Y10T279/17555	10	Loose jaws	CPCONLY	Y10T279/17555		74
Y10T279/17564	9	Loose jaws	CPCONLY	Y10T279/17564		170
Y10T279/17572	10	Moving-cam actuator	CPCONLY	Y10T279/17572		
Y10T279/17581	11	Threaded cam sleeve	CPCONLY	Y10T279/17581		248
Y10T279/17589	11	Reciprocating cam sleeve	CPCONLY	Y10T279/17589		108
Y10T279/17598	10	Fixed cam and moving jaws	CPCONLY	Y10T279/17598		128
Y10T279/17606	11	Threaded sleeve and body	CPCONLY	Y10T279/17606		64
Y10T279/17615	9	Obliquely guided reciprocating jaws	CPCONLY	Y10T279/17615		295
Y10T279/17623	10	Threaded sleeve and jaw	CPCONLY	Y10T279/17623		96
Y10T279/17632	11	Conical sleeve	CPCONLY	Y10T279/17632		378
Y10T279/17641	10	Threaded central cone and jaw	CPCONLY	Y10T279/17641		47
Y10T279/17649	10	Threaded sleeve and body	CPCONLY	Y10T279/17649		105
Y10T279/17658	10	Reciprocating jaw advancing sleeve	CPCONLY	Y10T279/17658		41
Y10T279/17666	9	Radially reciprocating jaws	CPCONLY	Y10T279/17666		102
Y10T279/17675	10	Transverse-screw actuated	CPCONLY	Y10T279/17675		76
Y10T279/17683	11	Interlaced jaws	CPCONLY	Y10T279/17683		36
Y10T279/17692	10	Moving-cam actuator	CPCONLY	Y10T279/17692		
Y10T279/17701	11	Threaded cam sleeve	CPCONLY	Y10T279/17701		96
Y10T279/17709	11	Threaded sleeve and wedge	CPCONLY	Y10T279/17709		14
Y10T279/17717	11	Rotary eccentric-cam sleeve	CPCONLY	Y10T279/17717		234
Y10T279/17726	12	Roller and rocking jaw	CPCONLY	Y10T279/17726		61
Y10T279/17735	12	Worm actuated	CPCONLY	Y10T279/17735		20
Y10T279/17743	11	Reciprocating cam sleeve	CPCONLY	Y10T279/17743		171
Y10T279/17752	12	Ball or roller jaws	CPCONLY	Y10T279/17752		473
Y10T279/17761	9	Side detent	CPCONLY	Y10T279/17761		433
Y10T279/17769	10	Pivoted or rotary	CPCONLY	Y10T279/17769		263
Y10T279/17777	11	Sleeved	CPCONLY	Y10T279/17777		73
Y10T279/17786	10	Spring	CPCONLY	Y10T279/17786		405
Y10T279/17794	11	Sleeved	CPCONLY	Y10T279/17794		51
Y10T279/17803	10	Rotary cam sleeve	CPCONLY	Y10T279/17803		137
Y10T279/17811	10	Reciprocating sleeve	CPCONLY	Y10T279/17811		209
Y10T279/17821	10	Set screw	CPCONLY	Y10T279/17821		392
Y10T279/17829	10	U-clamp	CPCONLY	Y10T279/17829		30
Y10T279/17837	10	Plural bolt	CPCONLY	Y10T279/17837		12
Y10T279/17846	10	Single transverse bolt	CPCONLY	Y10T279/17846		109
Y10T279/17854	10	Longitudinal clamping wedge	CPCONLY	Y10T279/17854		99
Y10T279/17863	9	Shouldered-tang holding	CPCONLY	Y10T279/17863		174
Y10T279/17871	10	Cap	CPCONLY	Y10T279/17871		71
Y10T279/17881	11	Screw	CPCONLY	Y10T279/17881		145
Y10T279/17888	9	Tang offset within socket	CPCONLY	Y10T279/17888		294
Y10T279/17897	9	Tang offset without socket	CPCONLY	Y10T279/17897		19
Y10T279/17905	9	Bottomless	CPCONLY	Y10T279/17905		97
Y10T279/17914	10	Friction grip	CPCONLY	Y10T279/17914		76
Y10T279/17923	9	Transverse pin	CPCONLY	Y10T279/17923		421
Y10T279/17931	9	Screw threaded	CPCONLY	Y10T279/17931		237
Y10T279/17941	10	Nut lock	CPCONLY	Y10T279/17941		223
Y10T279/17948	11	Threaded sleeve	CPCONLY	Y10T279/17948		77
Y10T279/17957	9	Friction grip	CPCONLY	Y10T279/17957		427
Y10T279/17965	10	Drill type	CPCONLY	Y10T279/17965		351
Y10T279/17974	9	Barbed or pronged tang	CPCONLY	Y10T279/17974		117
Y10T279/17982	9	Molded or cast-in tang	CPCONLY	Y10T279/17982		68
Y10T279/17991	9	Adjustable length or size	CPCONLY	Y10T279/17991		71
Y10T279/18	8	Pivoted jaw	CPCONLY	Y10T279/18		389
Y10T279/182	9	Cam-sleeve actuated	CPCONLY	Y10T279/182		56
Y10T279/185	9	Internal-cone actuated	CPCONLY	Y10T279/185		105
Y10T279/188	9	Toggle actuated	CPCONLY	Y10T279/188		56
Y10T279/19	8	Radially reciprocating jaws	CPCONLY	Y10T279/19		323
Y10T279/1906	9	with indicator	CPCONLY	Y10T279/1906		32
Y10T279/1913	9	Transverse-screw actuated	CPCONLY	Y10T279/1913		209
Y10T279/1921	10	Annular rack	CPCONLY	Y10T279/1921		95
Y10T279/1926	9	Spiral cam or scroll actuated	CPCONLY	Y10T279/1926		252
Y10T279/1933	10	Worm	CPCONLY	Y10T279/1933		22
Y10T279/1941	10	Bevel pinion	CPCONLY	Y10T279/1941		93
Y10T279/1946	9	Rack-and-pinion actuated	CPCONLY	Y10T279/1946		43
Y10T279/1953	9	Toggle actuated	CPCONLY	Y10T279/1953		92
Y10T279/1961	9	Lever actuated	CPCONLY	Y10T279/1961		204
Y10T279/1966	10	Internal cone	CPCONLY	Y10T279/1966		37
Y10T279/1973	9	Wedge actuated	CPCONLY	Y10T279/1973		266
Y10T279/1981	9	External-cone actuated	CPCONLY	Y10T279/1981		47
Y10T279/1986	9	Jaws	CPCONLY	Y10T279/1986		556
Y10T279/1993	10	with means to facilitate jaw removal	CPCONLY	Y10T279/1993		68
Y10T279/20	8	with safety feature	CPCONLY	Y10T279/20		71
Y10T279/21	8	with measuring, indicating or control means	CPCONLY	Y10T279/21		152
Y10T279/22	8	Double acting	CPCONLY	Y10T279/22		49
Y10T279/23	8	with magnetic or electrostatic means	CPCONLY	Y10T279/23		560
Y10T279/24	8	by centrifugal force	CPCONLY	Y10T279/24		37
Y10T279/243	9	to counterbalance jaws	CPCONLY	Y10T279/243		67
Y10T279/247	9	to grip tool or workpiece	CPCONLY	Y10T279/247		105
Y10T279/25	8	Compensation for eccentricity	CPCONLY	Y10T279/25		125
Y10T279/26	8	with centering means	CPCONLY	Y10T279/26		314
Y10T279/27	8	Separate chuck-actuating power source	CPCONLY	Y10T279/27		134
Y10T279/275	9	Self-contained	CPCONLY	Y10T279/275		30
Y10T279/28	8	for gear or spline molding	CPCONLY	Y10T279/28		125
Y10T279/29	8	More than one set of gripping means	CPCONLY	Y10T279/29		206
Y10T279/30	8	Torsion mandrel	CPCONLY	Y10T279/30		34
Y10T279/31	8	Jaws mounted on flexible member; i.e. , diaphragm	CPCONLY	Y10T279/31		85
Y10T279/32	8	Means to prevent jaw loosening	CPCONLY	Y10T279/32		217
Y10T279/33	8	Member applies axial force component	CPCONLY	Y10T279/33		245
Y10T279/34	8	Accessory or component	CPCONLY	Y10T279/34		79
Y10T279/3406	9	Adapter	CPCONLY	Y10T279/3406		218
Y10T279/3412	10	Drive conversion	CPCONLY	Y10T279/3412		100
Y10T279/3418	10	for particular tool or workpiece	CPCONLY	Y10T279/3418		193
Y10T279/3425	9	Sliding cam chuck actuator	CPCONLY	Y10T279/3425		130
Y10T279/3431	9	Chuck key	CPCONLY	Y10T279/3431		97
Y10T279/3437	10	Safety feature; e.g., ejector, interlock	CPCONLY	Y10T279/3437		35
Y10T279/3443	10	Key holding or attaching means	CPCONLY	Y10T279/3443		54
Y10T279/3451	10	Nonseparable or built-in	CPCONLY	Y10T279/3451		56
Y10T279/3456	9	Padded or cushioned jaw	CPCONLY	Y10T279/3456		50
Y10T279/3462	9	Jaw insert	CPCONLY	Y10T279/3462		56
Y10T279/3468	10	Machinable jaw	CPCONLY	Y10T279/3468		48
Y10T279/3475	11	Locking or positioning means	CPCONLY	Y10T279/3475		29
Y10T279/3481	9	Tool or workpiece ejector	CPCONLY	Y10T279/3481		250
Y10T279/3487	9	Tool or work stop or locator	CPCONLY	Y10T279/3487		342
Y10T279/3493	9	Protection means; e.g., cover, seal, overstress prevention, air blast	CPCONLY	Y10T279/3493		205
Y10T279/35	8	Miscellaneous	CPCONLY	Y10T279/35		336
Y10T292/00	7	Closure fasteners	CPCONLY	Y10T292/00		
Y10T292/03	8	Miscellaneous	CPCONLY	Y10T292/03		683
Y10T292/06	8	Adjustable backset	CPCONLY	Y10T292/06		195
Y10T292/08	8	Bolts	CPCONLY	Y10T292/08		623
Y10T292/0801	9	Multiple	CPCONLY	Y10T292/0801		154
Y10T292/0802	10	Sliding and rotary	CPCONLY	Y10T292/0802		90
Y10T292/0803	10	Sliding and swinging	CPCONLY	Y10T292/0803		353
Y10T292/0805	11	Combined motion	CPCONLY	Y10T292/0805		180
Y10T292/0806	12	Lever-operating means	CPCONLY	Y10T292/0806		236
Y10T292/0807	10	Sliding and hooked end	CPCONLY	Y10T292/0807		122
Y10T292/0808	10	Sliding and roller	CPCONLY	Y10T292/0808		40
Y10T292/0809	10	Sliding and spring arm	CPCONLY	Y10T292/0809		25
Y10T292/081	10	Swinging and hooked end	CPCONLY	Y10T292/081		143
Y10T292/0811	10	Swinging and roller	CPCONLY	Y10T292/0811		15
Y10T292/0813	10	Swinging and spring arm	CPCONLY	Y10T292/0813		49
Y10T292/0814	10	Double acting	CPCONLY	Y10T292/0814		30
Y10T292/0815	11	Roller	CPCONLY	Y10T292/0815		64
Y10T292/0816	11	Sliding	CPCONLY	Y10T292/0816		40
Y10T292/0817	11	Spring arm	CPCONLY	Y10T292/0817		366
Y10T292/0818	11	Swinging	CPCONLY	Y10T292/0818		76
Y10T292/082	10	Spring arm	CPCONLY	Y10T292/082		296
Y10T292/0821	11	Combined motion	CPCONLY	Y10T292/0821		36
Y10T292/0822	10	Emergency operating means	CPCONLY	Y10T292/0822		207
Y10T292/0823	10	Gear	CPCONLY	Y10T292/0823		38
Y10T292/0824	10	Roller	CPCONLY	Y10T292/0824		51
Y10T292/0825	10	Hooked end	CPCONLY	Y10T292/0825		128
Y10T292/0826	11	Operating means	CPCONLY	Y10T292/0826		133
Y10T292/0828	12	Link and lever	CPCONLY	Y10T292/0828		149
Y10T292/0829	12	Cam	CPCONLY	Y10T292/0829		144
Y10T292/083	12	Flexible	CPCONLY	Y10T292/083		57
Y10T292/0831	12	Lever	CPCONLY	Y10T292/0831		88
Y10T292/0832	12	Push or pull rod	CPCONLY	Y10T292/0832		58
Y10T292/0833	12	Rigid	CPCONLY	Y10T292/0833		128
Y10T292/0834	10	Sliding	CPCONLY	Y10T292/0834		186
Y10T292/0836	11	Operating means	CPCONLY	Y10T292/0836		287
Y10T292/0837	12	Cam and lever	CPCONLY	Y10T292/0837		188
Y10T292/0838	12	Lever and push or pull rod	CPCONLY	Y10T292/0838		103
Y10T292/0839	12	Link and lever	CPCONLY	Y10T292/0839		454
Y10T292/084	12	Cam	CPCONLY	Y10T292/084		375
Y10T292/0841	12	Flexible	CPCONLY	Y10T292/0841		135
Y10T292/0843	12	Gear	CPCONLY	Y10T292/0843		310
Y10T292/0844	12	Lever	CPCONLY	Y10T292/0844		298
Y10T292/0845	12	Push or pull rod	CPCONLY	Y10T292/0845		64
Y10T292/0846	12	Rigid	CPCONLY	Y10T292/0846		210
Y10T292/0847	12	Screw	CPCONLY	Y10T292/0847		49
Y10T292/0848	10	Swinging	CPCONLY	Y10T292/0848		202
Y10T292/0849	11	Operating means	CPCONLY	Y10T292/0849		162
Y10T292/0851	12	Cam and lever	CPCONLY	Y10T292/0851		62
Y10T292/0852	12	Link and cam	CPCONLY	Y10T292/0852		34
Y10T292/0853	12	Link and lever	CPCONLY	Y10T292/0853		267
Y10T292/0854	12	Cam	CPCONLY	Y10T292/0854		165
Y10T292/0855	12	Flexible	CPCONLY	Y10T292/0855		63
Y10T292/0856	12	Gear	CPCONLY	Y10T292/0856		91
Y10T292/0857	12	Lever	CPCONLY	Y10T292/0857		111
Y10T292/0859	12	Push or pull rod	CPCONLY	Y10T292/0859		96
Y10T292/086	12	Rigid	CPCONLY	Y10T292/086		273
Y10T292/0861	12	Screw	CPCONLY	Y10T292/0861		44
Y10T292/0862	9	Swinging and hooked end, multiple head	CPCONLY	Y10T292/0862		104
Y10T292/0863	9	Sliding and rotary	CPCONLY	Y10T292/0863		409
Y10T292/0864	10	Combined motion	CPCONLY	Y10T292/0864		137
Y10T292/0866	10	Multiple head	CPCONLY	Y10T292/0866		82
Y10T292/0867	10	Spring projected	CPCONLY	Y10T292/0867		227
Y10T292/0868	11	Combined motion	CPCONLY	Y10T292/0868		78
Y10T292/0869	10	Spring retracted	CPCONLY	Y10T292/0869		116
Y10T292/087	9	Loops	CPCONLY	Y10T292/087		294
Y10T292/0871	10	Sliding and swinging, lever-operating means	CPCONLY	Y10T292/0871		328
Y10T292/0872	10	Sliding catch	CPCONLY	Y10T292/0872		35
Y10T292/0874	10	Spring-arm catch	CPCONLY	Y10T292/0874		28
Y10T292/0875	10	Swinging catch	CPCONLY	Y10T292/0875		69
Y10T292/0876	9	Double acting	CPCONLY	Y10T292/0876		145
Y10T292/0877	10	Sliding and swinging	CPCONLY	Y10T292/0877		80
Y10T292/0878	10	Sliding	CPCONLY	Y10T292/0878		200
Y10T292/0879	11	Roller	CPCONLY	Y10T292/0879		131
Y10T292/088	10	Spring arm	CPCONLY	Y10T292/088		468
Y10T292/0882	11	Roller	CPCONLY	Y10T292/0882		57
Y10T292/0883	10	Swinging	CPCONLY	Y10T292/0883		253
Y10T292/0884	11	Roller	CPCONLY	Y10T292/0884		106
Y10T292/0885	10	Roller	CPCONLY	Y10T292/0885		80
Y10T292/0886	9	Sliding and swinging	CPCONLY	Y10T292/0886		217
Y10T292/0887	10	Operating means	CPCONLY	Y10T292/0887		143
Y10T292/0889	11	Cam	CPCONLY	Y10T292/0889		106
Y10T292/089	11	Lever	CPCONLY	Y10T292/089		238
Y10T292/0891	11	Rigid	CPCONLY	Y10T292/0891		358
Y10T292/0892	10	Multiple head	CPCONLY	Y10T292/0892		84
Y10T292/0893	10	Spring retracted	CPCONLY	Y10T292/0893		38
Y10T292/0894	9	Spring arm	CPCONLY	Y10T292/0894		480
Y10T292/0895	10	Operating means	CPCONLY	Y10T292/0895		66
Y10T292/0897	11	Link and lever	CPCONLY	Y10T292/0897		21
Y10T292/0898	11	Cam	CPCONLY	Y10T292/0898		121
Y10T292/0899	11	Flexible	CPCONLY	Y10T292/0899		30
Y10T292/09	11	Lever	CPCONLY	Y10T292/09		59
Y10T292/0901	11	Push or pull rod	CPCONLY	Y10T292/0901		106
Y10T292/0902	11	Rigid	CPCONLY	Y10T292/0902		550
Y10T292/0903	12	Seal catch	CPCONLY	Y10T292/0903		52
Y10T292/0905	12	Swinging catch	CPCONLY	Y10T292/0905		56
Y10T292/0906	11	Screw	CPCONLY	Y10T292/0906		21
Y10T292/0907	10	Multiple head	CPCONLY	Y10T292/0907		165
Y10T292/0908	9	Emergency operating means	CPCONLY	Y10T292/0908		587
Y10T292/0909	10	Panel	CPCONLY	Y10T292/0909		155
Y10T292/091	10	Platform	CPCONLY	Y10T292/091		71
Y10T292/0911	9	Hooked end	CPCONLY	Y10T292/0911		293
Y10T292/0913	10	Sliding and swinging	CPCONLY	Y10T292/0913		122
Y10T292/0914	11	Operating means	CPCONLY	Y10T292/0914		93
Y10T292/0915	12	Cam	CPCONLY	Y10T292/0915		201
Y10T292/0916	12	Gear	CPCONLY	Y10T292/0916		31
Y10T292/0917	12	Lever	CPCONLY	Y10T292/0917		533
Y10T292/0918	12	Rigid	CPCONLY	Y10T292/0918		231
Y10T292/092	12	Screw	CPCONLY	Y10T292/092		26
Y10T292/0921	10	Multiple head	CPCONLY	Y10T292/0921		148
Y10T292/0922	11	Operating means	CPCONLY	Y10T292/0922		59
Y10T292/0923	12	Lever	CPCONLY	Y10T292/0923		37
Y10T292/0924	12	Push or pull rod	CPCONLY	Y10T292/0924		34
Y10T292/0925	12	Rigid	CPCONLY	Y10T292/0925		171
Y10T292/0926	10	Spring projected	CPCONLY	Y10T292/0926		192
Y10T292/0928	11	Operating means	CPCONLY	Y10T292/0928		86
Y10T292/0929	12	Link and lever	CPCONLY	Y10T292/0929		79
Y10T292/093	12	Cam	CPCONLY	Y10T292/093		118
Y10T292/0931	12	Flexible	CPCONLY	Y10T292/0931		72
Y10T292/0932	12	Lever	CPCONLY	Y10T292/0932		151
Y10T292/0933	12	Push or pull rod	CPCONLY	Y10T292/0933		174
Y10T292/0934	12	Rigid	CPCONLY	Y10T292/0934		622
Y10T292/0936	10	Spring retracted	CPCONLY	Y10T292/0936		149
Y10T292/0937	10	Gravity actuated	CPCONLY	Y10T292/0937		71
Y10T292/0938	11	Operating means	CPCONLY	Y10T292/0938		26
Y10T292/0939	12	Cam	CPCONLY	Y10T292/0939		21
Y10T292/094	12	Flexible	CPCONLY	Y10T292/094		24
Y10T292/0941	12	Lever	CPCONLY	Y10T292/0941		35
Y10T292/0943	12	Push or pull rod	CPCONLY	Y10T292/0943		18
Y10T292/0944	12	Rigid	CPCONLY	Y10T292/0944		163
Y10T292/0945	10	Operating means	CPCONLY	Y10T292/0945		132
Y10T292/0946	11	Link and lever	CPCONLY	Y10T292/0946		106
Y10T292/0947	11	Cam	CPCONLY	Y10T292/0947		100
Y10T292/0948	11	Closure	CPCONLY	Y10T292/0948		195
Y10T292/0949	11	Lever	CPCONLY	Y10T292/0949		117
Y10T292/0951	11	Rigid	CPCONLY	Y10T292/0951		255
Y10T292/0952	12	Closure catch	CPCONLY	Y10T292/0952		88
Y10T292/0953	12	Friction catch	CPCONLY	Y10T292/0953		62
Y10T292/0954	12	Padlock or seal catch	CPCONLY	Y10T292/0954		190
Y10T292/0955	12	Screw catch	CPCONLY	Y10T292/0955		19
Y10T292/0956	12	Sliding catch	CPCONLY	Y10T292/0956		229
Y10T292/0957	12	Spring-arm catch	CPCONLY	Y10T292/0957		94
Y10T292/0959	12	Swinging catch	CPCONLY	Y10T292/0959		333
Y10T292/096	9	Sliding	CPCONLY	Y10T292/096		358
Y10T292/0961	10	Multiple head	CPCONLY	Y10T292/0961		117
Y10T292/0962	11	Operating means	CPCONLY	Y10T292/0962		92
Y10T292/0963	12	Link and lever	CPCONLY	Y10T292/0963		66
Y10T292/0964	12	Cam	CPCONLY	Y10T292/0964		100
Y10T292/0966	12	Gear	CPCONLY	Y10T292/0966		56
Y10T292/0967	12	Lever	CPCONLY	Y10T292/0967		101
Y10T292/0968	12	Rigid	CPCONLY	Y10T292/0968		223
Y10T292/0969	10	Spring projected	CPCONLY	Y10T292/0969		374
Y10T292/097	11	Operating means	CPCONLY	Y10T292/097		371
Y10T292/0971	12	Cam and lever	CPCONLY	Y10T292/0971		330
Y10T292/0972	12	Lever and push or pull rod	CPCONLY	Y10T292/0972		232
Y10T292/0974	12	Link and lever	CPCONLY	Y10T292/0974		319
Y10T292/0975	12	Link and push or pull rod	CPCONLY	Y10T292/0975		54
Y10T292/0976	12	Sliding cam	CPCONLY	Y10T292/0976		280
Y10T292/0977	12	Cam	CPCONLY	Y10T292/0977		311
Y10T292/0978	13	Specifically related to vehicle closure	CPCONLY	Y10T292/0978		146
Y10T292/0979	14	Bolt disabled by contraretractive movement of inside handle	CPCONLY	Y10T292/0979		47
Y10T292/098	13	Auxiliary bolt	CPCONLY	Y10T292/098		124
Y10T292/0982	13	Bolt blocking or disabling means	CPCONLY	Y10T292/0982		197
Y10T292/0983	14	Involves rollback	CPCONLY	Y10T292/0983		130
Y10T292/0984	15	Rollback members located on separate spindles	CPCONLY	Y10T292/0984		102
Y10T292/0985	14	Discrete pivotable or rotatable actuator	CPCONLY	Y10T292/0985		162
Y10T292/0986	14	Discrete push or pull actuator	CPCONLY	Y10T292/0986		151
Y10T292/0987	13	Bolt has ancillary projection spring	CPCONLY	Y10T292/0987		53
Y10T292/0989	13	Plural rollback elements directionally selectively effective	CPCONLY	Y10T292/0989		192
Y10T292/099	14	On separate spindles	CPCONLY	Y10T292/099		102
Y10T292/0991	14	On a tubular member	CPCONLY	Y10T292/0991		47
Y10T292/0992	12	Flexible	CPCONLY	Y10T292/0992		151
Y10T292/0993	12	Gear	CPCONLY	Y10T292/0993		158
Y10T292/0994	12	Lever	CPCONLY	Y10T292/0994		700
Y10T292/0995	12	Push or pull rod	CPCONLY	Y10T292/0995		172
Y10T292/0997	12	Rigid	CPCONLY	Y10T292/0997		713
Y10T292/0998	12	Screw	CPCONLY	Y10T292/0998		17
Y10T292/0999	10	Spring retracted	CPCONLY	Y10T292/0999		130
Y10T292/10	11	Friction catch	CPCONLY	Y10T292/10		35
Y10T292/1001	11	Sliding catch	CPCONLY	Y10T292/1001		81
Y10T292/1002	11	Spring-arm catch	CPCONLY	Y10T292/1002		24
Y10T292/1003	11	Swinging catch	CPCONLY	Y10T292/1003		106
Y10T292/1005	11	Cam-operating means	CPCONLY	Y10T292/1005		121
Y10T292/1006	10	Gravity actuated	CPCONLY	Y10T292/1006		46
Y10T292/1007	11	Operating means	CPCONLY	Y10T292/1007		42
Y10T292/1008	12	Cam and lever	CPCONLY	Y10T292/1008		20
Y10T292/1009	12	Link and lever	CPCONLY	Y10T292/1009		22
Y10T292/101	12	Cam	CPCONLY	Y10T292/101		44
Y10T292/1011	12	Lever	CPCONLY	Y10T292/1011		56
Y10T292/1013	12	Rigid	CPCONLY	Y10T292/1013		96
Y10T292/1014	10	Operating means	CPCONLY	Y10T292/1014		219
Y10T292/1015	11	Link and lever	CPCONLY	Y10T292/1015		185
Y10T292/1016	11	Cam	CPCONLY	Y10T292/1016		383
Y10T292/1017	11	Flexible	CPCONLY	Y10T292/1017		59
Y10T292/1018	11	Gear	CPCONLY	Y10T292/1018		213
Y10T292/102	11	Lever	CPCONLY	Y10T292/102		193
Y10T292/1021	11	Motor	CPCONLY	Y10T292/1021		907
Y10T292/1022	11	Rigid	CPCONLY	Y10T292/1022		371
Y10T292/1023	12	Closure catch	CPCONLY	Y10T292/1023		91
Y10T292/1024	12	Friction catch	CPCONLY	Y10T292/1024		168
Y10T292/1025	12	Padlock or seal catch	CPCONLY	Y10T292/1025		308
Y10T292/1026	12	Screw catch	CPCONLY	Y10T292/1026		87
Y10T292/1028	12	Sliding catch	CPCONLY	Y10T292/1028		634
Y10T292/1029	13	Seal	CPCONLY	Y10T292/1029		29
Y10T292/103	12	Spring-arm catch	CPCONLY	Y10T292/103		157
Y10T292/1031	12	Swinging catch	CPCONLY	Y10T292/1031		738
Y10T292/1032	13	Seal	CPCONLY	Y10T292/1032		14
Y10T292/1033	11	Screw	CPCONLY	Y10T292/1033		122
Y10T292/1034	10	Curved	CPCONLY	Y10T292/1034		73
Y10T292/1036	10	End lever	CPCONLY	Y10T292/1036		46
Y10T292/1037	10	Pivoted end	CPCONLY	Y10T292/1037		108
Y10T292/1038	10	Roller	CPCONLY	Y10T292/1038		94
Y10T292/1039	9	Swinging and camming	CPCONLY	Y10T292/1039		362
Y10T292/10395	10	Spring projected	CPCONLY	Y10T292/10395		
Y10T292/104	11	Rigid operating means	CPCONLY	Y10T292/104		175
Y10T292/1041	10	Rigid operating means	CPCONLY	Y10T292/1041		706
Y10T292/1043	9	Swinging	CPCONLY	Y10T292/1043		429
Y10T292/1044	10	Multiple head	CPCONLY	Y10T292/1044		302
Y10T292/1045	11	Operating means	CPCONLY	Y10T292/1045		116
Y10T292/1046	12	Cam	CPCONLY	Y10T292/1046		73
Y10T292/1047	12	Closure	CPCONLY	Y10T292/1047		1603
Y10T292/1048	12	Lever	CPCONLY	Y10T292/1048		114
Y10T292/1049	12	Rigid	CPCONLY	Y10T292/1049		524
Y10T292/1051	10	Spring projected	CPCONLY	Y10T292/1051		203
Y10T292/1052	11	Operating means	CPCONLY	Y10T292/1052		153
Y10T292/1053	12	Lever and push or pull rod	CPCONLY	Y10T292/1053		142
Y10T292/1054	12	Link and cam	CPCONLY	Y10T292/1054		58
Y10T292/1055	12	Link and lever	CPCONLY	Y10T292/1055		206
Y10T292/1056	12	Cam	CPCONLY	Y10T292/1056		195
Y10T292/1057	12	Flexible	CPCONLY	Y10T292/1057		124
Y10T292/1059	12	Lever	CPCONLY	Y10T292/1059		264
Y10T292/106	12	Push or pull rod	CPCONLY	Y10T292/106		193
Y10T292/1061	12	Rigid	CPCONLY	Y10T292/1061		682
Y10T292/1062	10	Spring retracted	CPCONLY	Y10T292/1062		274
Y10T292/1063	10	Gravity actuated	CPCONLY	Y10T292/1063		226
Y10T292/1064	11	Operating means	CPCONLY	Y10T292/1064		63
Y10T292/1066	12	Cam and lever	CPCONLY	Y10T292/1066		12
Y10T292/1067	12	Link and lever	CPCONLY	Y10T292/1067		45
Y10T292/1068	12	Cam	CPCONLY	Y10T292/1068		35
Y10T292/1069	12	Flexible	CPCONLY	Y10T292/1069		48
Y10T292/107	12	Lever	CPCONLY	Y10T292/107		90
Y10T292/1071	12	Push or pull rod	CPCONLY	Y10T292/1071		65
Y10T292/1072	12	Rigid	CPCONLY	Y10T292/1072		462
Y10T292/1074	11	Roller	CPCONLY	Y10T292/1074		104
Y10T292/1075	10	Operating means	CPCONLY	Y10T292/1075		208
Y10T292/1076	11	Link and lever	CPCONLY	Y10T292/1076		162
Y10T292/1077	11	Cam	CPCONLY	Y10T292/1077		153
Y10T292/1078	11	Closure	CPCONLY	Y10T292/1078		381
Y10T292/1079	11	Gear	CPCONLY	Y10T292/1079		141
Y10T292/108	11	Lever	CPCONLY	Y10T292/108		265
Y10T292/1082	11	Motor	CPCONLY	Y10T292/1082		1476
Y10T292/1083	11	Rigid	CPCONLY	Y10T292/1083		700
Y10T292/1084	12	Closure catch	CPCONLY	Y10T292/1084		104
Y10T292/1085	12	Friction catch	CPCONLY	Y10T292/1085		282
Y10T292/1086	12	Padlock or seal catch	CPCONLY	Y10T292/1086		333
Y10T292/1087	12	Screw catch	CPCONLY	Y10T292/1087		101
Y10T292/1089	12	Sliding catch	CPCONLY	Y10T292/1089		490
Y10T292/109	13	Seal	CPCONLY	Y10T292/109		27
Y10T292/1091	12	Spring-arm catch	CPCONLY	Y10T292/1091		157
Y10T292/1092	12	Swinging catch	CPCONLY	Y10T292/1092		878
Y10T292/1093	13	Seal	CPCONLY	Y10T292/1093		26
Y10T292/1094	11	Screw	CPCONLY	Y10T292/1094		114
Y10T292/1095	9	Seal-rupturing devices	CPCONLY	Y10T292/1095		38
Y10T292/1097	9	Reversible	CPCONLY	Y10T292/1097		355
Y10T292/1098	10	Cam and lever operating means	CPCONLY	Y10T292/1098		75
Y10T292/1099	9	Screw	CPCONLY	Y10T292/1099		435
Y10T292/11	8	Magnetic	CPCONLY	Y10T292/11		853
Y10T292/14	8	Ball	CPCONLY	Y10T292/14		219
Y10T292/17	8	Bendable securers	CPCONLY	Y10T292/17		213
Y10T292/175	8	Bolt releasers	CPCONLY	Y10T292/175		
Y10T292/18	9	Free-end-engaging means	CPCONLY	Y10T292/18		383
Y10T292/19	9	Foot operated	CPCONLY	Y10T292/19		152
Y10T292/20	8	Clamps	CPCONLY	Y10T292/20		655
Y10T292/202	9	Hatch fastener	CPCONLY	Y10T292/202		203
Y10T292/205	9	Ring	CPCONLY	Y10T292/205		247
Y10T292/207	10	Permanently deformed	CPCONLY	Y10T292/207		106
Y10T292/209	10	Resilient wedge	CPCONLY	Y10T292/209		105
Y10T292/212	10	With expanding or contracting means	CPCONLY	Y10T292/212		127
Y10T292/214	11	Screw	CPCONLY	Y10T292/214		163
Y10T292/216	11	Toggle lever	CPCONLY	Y10T292/216		238
Y10T292/218	9	Screw against closure	CPCONLY	Y10T292/218		143
Y10T292/221	9	Screw and nut	CPCONLY	Y10T292/221		193
Y10T292/223	10	Swingable	CPCONLY	Y10T292/223		117
Y10T292/225	9	Cam-operating means	CPCONLY	Y10T292/225		229
Y10T292/228	9	Portable	CPCONLY	Y10T292/228		292
Y10T292/23	8	Cross bars	CPCONLY	Y10T292/23		628
Y10T292/237	9	Screw-operating means	CPCONLY	Y10T292/237		186
Y10T292/243	9	Vehicle door latches	CPCONLY	Y10T292/243		43
Y10T292/25	8	Cylinder	CPCONLY	Y10T292/25		133
Y10T292/28	8	Extension link	CPCONLY	Y10T292/28		615
Y10T292/282	9	Multiple	CPCONLY	Y10T292/282		469
Y10T292/283	9	Chain	CPCONLY	Y10T292/283		267
Y10T292/285	9	Notched bar	CPCONLY	Y10T292/285		155
Y10T292/286	10	Sliding catch	CPCONLY	Y10T292/286		82
Y10T292/288	10	Swinging catch	CPCONLY	Y10T292/288		102
Y10T292/289	9	Slotted bar	CPCONLY	Y10T292/289		121
Y10T292/291	10	Sliding catch	CPCONLY	Y10T292/291		76
Y10T292/293	10	Swinging catch	CPCONLY	Y10T292/293		58
Y10T292/2935	9	Slotted or notched keeper	CPCONLY	Y10T292/2935		
Y10T292/294	10	Sliding catch	CPCONLY	Y10T292/294		45
Y10T292/296	10	Swinging catch	CPCONLY	Y10T292/296		53
Y10T292/297	9	Notched keeper	CPCONLY	Y10T292/297		81
Y10T292/299	9	Slotted keeper	CPCONLY	Y10T292/299		83
Y10T292/301	9	Friction catch	CPCONLY	Y10T292/301		284
Y10T292/302	9	Screw catch	CPCONLY	Y10T292/302		90
Y10T292/304	9	Sliding catch	CPCONLY	Y10T292/304		104
Y10T292/305	9	Swinging catch	CPCONLY	Y10T292/305		161
Y10T292/306	8	Gear	CPCONLY	Y10T292/306		1
Y10T292/307	9	Sliding catch	CPCONLY	Y10T292/307		109
Y10T292/308	9	Swinging catch	CPCONLY	Y10T292/308		312
Y10T292/31	8	Hasps	CPCONLY	Y10T292/31		391
Y10T292/314	9	Sliding catch	CPCONLY	Y10T292/314		152
Y10T292/319	10	Seal	CPCONLY	Y10T292/319		175
Y10T292/323	9	Swinging catch	CPCONLY	Y10T292/323		217
Y10T292/327	10	Seal	CPCONLY	Y10T292/327		65
Y10T292/331	9	Seal catch	CPCONLY	Y10T292/331		72
Y10T292/336	9	Seal-rupturing devices	CPCONLY	Y10T292/336		40
Y10T292/34	8	Portable	CPCONLY	Y10T292/34		686
Y10T292/37	8	Portable securer plate or bar	CPCONLY	Y10T292/37		157
Y10T292/373	9	Sliding and swinging holding member	CPCONLY	Y10T292/373		63
Y10T292/376	9	Screw-holding member	CPCONLY	Y10T292/376		47
Y10T292/379	9	Sliding holding member	CPCONLY	Y10T292/379		165
Y10T292/382	10	Screw-operating means	CPCONLY	Y10T292/382		58
Y10T292/385	10	Screw catch	CPCONLY	Y10T292/385		40
Y10T292/388	10	Sliding catch	CPCONLY	Y10T292/388		57
Y10T292/391	10	Swinging catch	CPCONLY	Y10T292/391		73
Y10T292/394	9	Swinging holding member	CPCONLY	Y10T292/394		115
Y10T292/397	10	Catch devices	CPCONLY	Y10T292/397		61
Y10T292/40	8	Rings	CPCONLY	Y10T292/40		80
Y10T292/42	8	Rigid engaging means	CPCONLY	Y10T292/42		339
Y10T292/426	9	Screw catch	CPCONLY	Y10T292/426		60
Y10T292/432	9	Sliding catch	CPCONLY	Y10T292/432		381
Y10T292/438	9	Spring-arm catch	CPCONLY	Y10T292/438		159
Y10T292/444	9	Swinging catch	CPCONLY	Y10T292/444		405
Y10T292/45	8	Rod clamps	CPCONLY	Y10T292/45		215
Y10T292/47	9	Friction-plate catch	CPCONLY	Y10T292/47		196
Y10T292/48	8	Seals	CPCONLY	Y10T292/48		760
Y10T292/481	9	Compressible disk	CPCONLY	Y10T292/481		141
Y10T292/483	10	Reinforced	CPCONLY	Y10T292/483		32
Y10T292/484	10	Multiple	CPCONLY	Y10T292/484		20
Y10T292/485	11	Sheet metal	CPCONLY	Y10T292/485		18
Y10T292/487	11	Hard and soft metal	CPCONLY	Y10T292/487		43
Y10T292/488	10	Sheet metal	CPCONLY	Y10T292/488		47
Y10T292/49	9	Compressible rivets and eyelets	CPCONLY	Y10T292/49		50
Y10T292/491	9	Distorted shackle	CPCONLY	Y10T292/491		164
Y10T292/492	9	Driving	CPCONLY	Y10T292/492		60
Y10T292/494	9	Interengaging shackle ends, inclosing housing	CPCONLY	Y10T292/494		145
Y10T292/4945	9	Rigid shackle ends	CPCONLY	Y10T292/4945		
Y10T292/495	10	Resilient and rigid engaging means	CPCONLY	Y10T292/495		62
Y10T292/496	10	Resilient engaging means	CPCONLY	Y10T292/496		241
Y10T292/497	9	Resilient shackle ends	CPCONLY	Y10T292/497		
Y10T292/498	10	Rigid engaging means	CPCONLY	Y10T292/498		162
Y10T292/499	10	Resilient engaging means	CPCONLY	Y10T292/499		80
Y10T292/50	9	Single piece, spring catch	CPCONLY	Y10T292/50		191
Y10T292/502	9	Shiftable catch shackle operated	CPCONLY	Y10T292/502		64
Y10T292/503	9	Split-ring catch, shackle operated	CPCONLY	Y10T292/503		54
Y10T292/505	9	Strap-end fasteners	CPCONLY	Y10T292/505		206
Y10T292/506	9	Rigid disk, distorted shackle	CPCONLY	Y10T292/506		28
Y10T292/507	9	Tag type	CPCONLY	Y10T292/507		134
Y10T292/509	9	Encasing	CPCONLY	Y10T292/509		128
Y10T292/51	8	Seal bolts	CPCONLY	Y10T292/51		213
Y10T292/513	8	Shackles	CPCONLY	Y10T292/513		
Y10T292/516	9	Sliding catch, seal	CPCONLY	Y10T292/516		45
Y10T292/522	9	Swinging catch, seal	CPCONLY	Y10T292/522		41
Y10T292/528	9	Seal catch	CPCONLY	Y10T292/528		68
Y10T292/534	9	Seal-rupturing devices	CPCONLY	Y10T292/534		20
Y10T292/54	8	Trippers	CPCONLY	Y10T292/54		337
Y10T292/546	9	Sliding detent	CPCONLY	Y10T292/546		173
Y10T292/552	9	Spring-arm detent	CPCONLY	Y10T292/552		83
Y10T292/558	9	Sliding bolt, swinging detent	CPCONLY	Y10T292/558		267
Y10T292/564	9	Swinging bolt, swinging detent	CPCONLY	Y10T292/564		182
Y10T292/57	8	Operators with knobs or handles	CPCONLY	Y10T292/57		2020
Y10T292/59	8	Rollback and spindle connection	CPCONLY	Y10T292/59		119
Y10T292/62	8	Bolt casings	CPCONLY	Y10T292/62		905
Y10T292/65	8	Braces	CPCONLY	Y10T292/65		496
Y10T292/67	9	Portable	CPCONLY	Y10T292/67		210
Y10T292/68	8	Keepers	CPCONLY	Y10T292/68		1013
Y10T292/683	9	Segment	CPCONLY	Y10T292/683		160
Y10T292/685	9	With anti-friction means	CPCONLY	Y10T292/685		84
Y10T292/688	9	With silencing or anti-rattle means	CPCONLY	Y10T292/688		262
Y10T292/691	10	Take-up	CPCONLY	Y10T292/691		130
Y10T292/694	9	Covers	CPCONLY	Y10T292/694		86
Y10T292/696	9	With movable dog, catch or striker	CPCONLY	Y10T292/696		505
Y10T292/699	10	Motor controlled	CPCONLY	Y10T292/699		405
Y10T292/702	10	Pivoted or swinging	CPCONLY	Y10T292/702		586
Y10T292/705	9	Adjustable	CPCONLY	Y10T292/705		392
Y10T292/707	10	Vertically	CPCONLY	Y10T292/707		131
Y10T292/71	8	Wedges	CPCONLY	Y10T292/71		477
Y10T292/73	9	Portable	CPCONLY	Y10T292/73		254
Y10T292/74	8	Weights	CPCONLY	Y10T292/74		20
Y10T292/76	8	Blind-slat holders	CPCONLY	Y10T292/76		218
Y10T292/79	8	Bolt guards	CPCONLY	Y10T292/79		325
Y10T292/82	8	Knobs	CPCONLY	Y10T292/82		876
Y10T292/85	8	Knob-attaching devices	CPCONLY	Y10T292/85		524
Y10T292/854	9	Friction	CPCONLY	Y10T292/854		70
Y10T292/858	9	Screw	CPCONLY	Y10T292/858		164
Y10T292/861	10	Guards	CPCONLY	Y10T292/861		54
Y10T292/865	9	Sliding	CPCONLY	Y10T292/865		186
Y10T292/869	9	Spring arm	CPCONLY	Y10T292/869		153
Y10T292/873	9	Swinging	CPCONLY	Y10T292/873		45
Y10T292/876	9	Wedge	CPCONLY	Y10T292/876		91
Y10T292/88	8	Knob bearings	CPCONLY	Y10T292/88		195
Y10T292/91	8	Knob rose plates	CPCONLY	Y10T292/91		338
Y10T292/93	8	Latch spindles	CPCONLY	Y10T292/93		195
Y10T292/96	8	Latch-spindle catches	CPCONLY	Y10T292/96		293
Y10T403/00	7	Joints and connections	CPCONLY	Y10T403/00		3
Y10T403/10	8	Selectively engageable hub to shaft connection	CPCONLY	Y10T403/10		266
Y10T403/16	8	with adjunctive protector, broken parts retainer, repair, assembly or disassembly feature	CPCONLY	Y10T403/16		424
Y10T403/1608	9	Holding means or protector functioning only during transportation, assembly or disassembly	CPCONLY	Y10T403/1608		212
Y10T403/1616	9	Position or guide means	CPCONLY	Y10T403/1616		444
Y10T403/1624	10	Related to joint component	CPCONLY	Y10T403/1624		397
Y10T403/1633	9	Utilizing fluid pressure	CPCONLY	Y10T403/1633		145
Y10T403/20	8	with indicator or inspection means	CPCONLY	Y10T403/20		276
Y10T403/21	8	Utilizing thermal characteristic, e.g. , expansion or contraction, etc.	CPCONLY	Y10T403/21		300
Y10T403/213	9	Interposed material of intermediate coefficient of expansion	CPCONLY	Y10T403/213		80
Y10T403/217	9	Members having different coefficients of expansion	CPCONLY	Y10T403/217		208
Y10T403/22	8	with fluid pressure responsive component	CPCONLY	Y10T403/22		250
Y10T403/29	8	Rotarily connected, differentially translatable members, e.g. , turn-buckle, etc.	CPCONLY	Y10T403/29		227
Y10T403/291	9	having tool-engaging means or operating handle	CPCONLY	Y10T403/291		184
Y10T403/293	9	having operating mechanism	CPCONLY	Y10T403/293		52
Y10T403/295	9	having locking means	CPCONLY	Y10T403/295		177
Y10T403/297	9	Differential pitch, similar hand	CPCONLY	Y10T403/297		44
Y10T403/299	9	Externally threaded actuator	CPCONLY	Y10T403/299		55
Y10T403/30	8	Laterally related members connected by latch means, e.g. , scaffold connectors	CPCONLY	Y10T403/30		290
Y10T403/32	8	Articulated members	CPCONLY	Y10T403/32		264
Y10T403/32008	9	Plural distinct articulation axes	CPCONLY	Y10T403/32008		334
Y10T403/32016	10	Three or more parallel axes	CPCONLY	Y10T403/32016		90
Y10T403/32024	10	Single adjustment for plural axes	CPCONLY	Y10T403/32024		94
Y10T403/32032	10	Plural ball and socket	CPCONLY	Y10T403/32032		339
Y10T403/32041	10	Universal	CPCONLY	Y10T403/32041		375
Y10T403/32049	11	Non-coplanar axes	CPCONLY	Y10T403/32049		232
Y10T403/32057	10	Angular and linear	CPCONLY	Y10T403/32057		367
Y10T403/32065	11	Screw and swivel	CPCONLY	Y10T403/32065		96
Y10T403/32073	11	Pivot stud slidable in elongated opening	CPCONLY	Y10T403/32073		177
Y10T403/32081	10	Parallel rotary	CPCONLY	Y10T403/32081		278
Y10T403/32091	10	Plural translating connections	CPCONLY	Y10T403/32091		130
Y10T403/32114	9	including static joint	CPCONLY	Y10T403/32114		177
Y10T403/32122	10	Trunnion assembly to side of rod	CPCONLY	Y10T403/32122		50
Y10T403/32131	10	One member is plate or side	CPCONLY	Y10T403/32131		161
Y10T403/32139	11	Secant, i.e., rod extending through plate	CPCONLY	Y10T403/32139		51
Y10T403/32147	11	Plate or side forms bearing surface	CPCONLY	Y10T403/32147		55
Y10T403/32155	11	Bearing component clamped to plate or side, e.g., bolted, etc.	CPCONLY	Y10T403/32155		200
Y10T403/32163	10	Articulate joint intermediate end joints	CPCONLY	Y10T403/32163		66
Y10T403/32172	11	Variable angle	CPCONLY	Y10T403/32172		144
Y10T403/32181	12	Universal	CPCONLY	Y10T403/32181		109
Y10T403/32188	10	Angled or offset members	CPCONLY	Y10T403/32188		134
Y10T403/32196	10	Articulate joint is ball and socket	CPCONLY	Y10T403/32196		258
Y10T403/32204	11	with threaded joint	CPCONLY	Y10T403/32204		215
Y10T403/32213	10	Articulate joint is a swivel	CPCONLY	Y10T403/32213		292
Y10T403/32221	10	Articulate joint comprises pivoted clevis or channel bar	CPCONLY	Y10T403/32221		327
Y10T403/32229	10	Articulate joint is a slide	CPCONLY	Y10T403/32229		85
Y10T403/32254	9	Lockable at fixed position	CPCONLY	Y10T403/32254		274
Y10T403/32262	10	At selected angle	CPCONLY	Y10T403/32262		426
Y10T403/32271	11	Movable brace between members	CPCONLY	Y10T403/32271		167
Y10T403/32278	11	Members rotatable about oblique axes	CPCONLY	Y10T403/32278		53
Y10T403/32286	11	Clamping screw traverses sliding complementary arcuate bearing surfaces	CPCONLY	Y10T403/32286		162
Y10T403/32295	11	Securing yoke or ring spaced radially from locking means	CPCONLY	Y10T403/32295		51
Y10T403/32303	12	Eyebolt	CPCONLY	Y10T403/32303		59
Y10T403/32311	11	Ball and socket	CPCONLY	Y10T403/32311		424
Y10T403/32319	11	including pivot stud	CPCONLY	Y10T403/32319		223
Y10T403/32327	12	including radially spaced detent or latch component	CPCONLY	Y10T403/32327		224
Y10T403/32336	13	Engaging notch or recess in outer periphery of component	CPCONLY	Y10T403/32336		492
Y10T403/32344	13	Side of rod engages recess in radial face	CPCONLY	Y10T403/32344		63
Y10T403/32352	13	Pivoted detent	CPCONLY	Y10T403/32352		106
Y10T403/32361	13	Engaging recess in radial face	CPCONLY	Y10T403/32361		223
Y10T403/32368	12	including radial interengaging tongue and slot or serrations	CPCONLY	Y10T403/32368		441
Y10T403/32377	12	Radially spaced arcuate slot engages fastener	CPCONLY	Y10T403/32377		129
Y10T403/32385	12	Locked by plural motions of one member	CPCONLY	Y10T403/32385		73
Y10T403/32393	12	including bridging keeper	CPCONLY	Y10T403/32393		198
Y10T403/32401	12	Locked by nesting parts	CPCONLY	Y10T403/32401		69
Y10T403/32409	12	Members locked in axial alignment	CPCONLY	Y10T403/32409		437
Y10T403/32418	11	Plural distinct positions	CPCONLY	Y10T403/32418		336
Y10T403/32426	10	Plural distinct positions	CPCONLY	Y10T403/32426		775
Y10T403/32434	11	Unidirectional movement, e.g., ratchet, etc.	CPCONLY	Y10T403/32434		164
Y10T403/32442	11	At least one discrete position	CPCONLY	Y10T403/32442		150
Y10T403/32451	12	Step-by-step adjustment	CPCONLY	Y10T403/32451		427
Y10T403/32459	13	Retainer extends through aligned recesses	CPCONLY	Y10T403/32459		406
Y10T403/32467	10	Telescoping members	CPCONLY	Y10T403/32467		251
Y10T403/32475	11	having detent	CPCONLY	Y10T403/32475		98
Y10T403/32483	12	Spring biased	CPCONLY	Y10T403/32483		393
Y10T403/32491	12	Threaded	CPCONLY	Y10T403/32491		116
Y10T403/32501	12	Cam or wedge	CPCONLY	Y10T403/32501		285
Y10T403/32508	12	having transverse pin	CPCONLY	Y10T403/32508		63
Y10T403/32516	11	Remotely actuated	CPCONLY	Y10T403/32516		94
Y10T403/32524	11	Self-locking	CPCONLY	Y10T403/32524		78
Y10T403/32532	10	Clamped members	CPCONLY	Y10T403/32532		303
Y10T403/32541	9	Rotatable members resiliently biased to one position	CPCONLY	Y10T403/32541		187
Y10T403/32549	9	including limit means	CPCONLY	Y10T403/32549		170
Y10T403/32557	10	for pivotal motion	CPCONLY	Y10T403/32557		240
Y10T403/32565	11	Ball and socket with restricted movement about one axis	CPCONLY	Y10T403/32565		169
Y10T403/32573	12	Ball stud passes through confining opening	CPCONLY	Y10T403/32573		124
Y10T403/32581	11	Pin and slot	CPCONLY	Y10T403/32581		192
Y10T403/32591	11	Opposed stops on one member	CPCONLY	Y10T403/32591		158
Y10T403/32606	9	Pivoted	CPCONLY	Y10T403/32606		509
Y10T403/32614	10	including circumferential biasing or damping means	CPCONLY	Y10T403/32614		152
Y10T403/32622	10	Rocking or rolling contact	CPCONLY	Y10T403/32622		194
Y10T403/32631	10	Universal ball and socket	CPCONLY	Y10T403/32631		786
Y10T403/32639	11	including internal tie means	CPCONLY	Y10T403/32639		104
Y10T403/32647	11	Plural concave surfaces with diverse curvature	CPCONLY	Y10T403/32647		56
Y10T403/32655	12	Interposed concavo-convex component	CPCONLY	Y10T403/32655		107
Y10T403/32663	12	Outer surfaces	CPCONLY	Y10T403/32663		81
Y10T403/32672	11	Swiveled ball parts or seat	CPCONLY	Y10T403/32672		98
Y10T403/32681	11	Composite ball	CPCONLY	Y10T403/32681		127
Y10T403/32688	12	Spring biased segments	CPCONLY	Y10T403/32688		56
Y10T403/32696	12	Nonmetallic part	CPCONLY	Y10T403/32696		73
Y10T403/32704	12	Stud extends into ball	CPCONLY	Y10T403/32704		278
Y10T403/32713	11	Elastomerically biased or backed components	CPCONLY	Y10T403/32713		186
Y10T403/32721	11	Elastomeric seat	CPCONLY	Y10T403/32721		284
Y10T403/32729	11	Externally packed	CPCONLY	Y10T403/32729		245
Y10T403/32737	11	including liner, shim, or discrete seat	CPCONLY	Y10T403/32737		477
Y10T403/32745	12	Spring acts through wedging surfaces	CPCONLY	Y10T403/32745		67
Y10T403/32754	12	Variably preloaded	CPCONLY	Y10T403/32754		142
Y10T403/32762	12	Spring-biased seat opposite ball stud	CPCONLY	Y10T403/32762		202
Y10T403/32771	12	Porous	CPCONLY	Y10T403/32771		47
Y10T403/32778	12	Completely spacing the members	CPCONLY	Y10T403/32778		320
Y10T403/32786	11	Divided socket-type coupling	CPCONLY	Y10T403/32786		232
Y10T403/32795	11	Bifurcated socket	CPCONLY	Y10T403/32795		122
Y10T403/32803	11	Separable socket sections	CPCONLY	Y10T403/32803		344
Y10T403/32811	11	Spring-biased	CPCONLY	Y10T403/32811		242
Y10T403/32819	10	including tension or take-up means	CPCONLY	Y10T403/32819		141
Y10T403/32827	11	Interposed spring means coaxial with pivot	CPCONLY	Y10T403/32827		244
Y10T403/32836	11	Acting through tapered surface on bearing component	CPCONLY	Y10T403/32836		101
Y10T403/32844	11	Manually variable	CPCONLY	Y10T403/32844		180
Y10T403/32852	11	External of bearing assembly, e.g., antirattler, etc.	CPCONLY	Y10T403/32852		116
Y10T403/32861	10	T-pivot, e.g., wrist pin, etc.	CPCONLY	Y10T403/32861		248
Y10T403/32868	11	Floating pin	CPCONLY	Y10T403/32868		65
Y10T403/32877	11	Pin is integral with or secured to inner member	CPCONLY	Y10T403/32877		148
Y10T403/32885	11	Expanded pin or end	CPCONLY	Y10T403/32885		61
Y10T403/32893	11	including distinct pin retainer	CPCONLY	Y10T403/32893		305
Y10T403/32901	12	Unitary clip or plug	CPCONLY	Y10T403/32901		154
Y10T403/32909	12	Threaded pin end	CPCONLY	Y10T403/32909		134
Y10T403/32918	11	fork and tongue	CPCONLY	Y10T403/32918		320
Y10T403/32926	12	with interposed antifriction means	CPCONLY	Y10T403/32926		115
Y10T403/32934	12	Oppositely laterally movable tines	CPCONLY	Y10T403/32934		66
Y10T403/32942	10	On oblique interface	CPCONLY	Y10T403/32942		43
Y10T403/32951	10	Transverse pin or stud	CPCONLY	Y10T403/32951		419
Y10T403/32959	11	Traverses interposed facing component	CPCONLY	Y10T403/32959		216
Y10T403/32967	11	Attached to or integral with one member	CPCONLY	Y10T403/32967		190
Y10T403/32975	9	Rotatable	CPCONLY	Y10T403/32975		397
Y10T403/32983	10	Rod in socket	CPCONLY	Y10T403/32983		396
Y10T403/33	8	Transverse rod to spaced plate surfaces	CPCONLY	Y10T403/33		265
Y10T403/335	9	Retainer utilizes or abuts plural plates	CPCONLY	Y10T403/335		131
Y10T403/34	8	Branched	CPCONLY	Y10T403/34		203
Y10T403/341	9	Three or more radiating members	CPCONLY	Y10T403/341		325
Y10T403/342	10	Polyhedral	CPCONLY	Y10T403/342		479
Y10T403/343	11	Unilateral of plane	CPCONLY	Y10T403/343		223
Y10T403/344	10	Plural pairs of axially aligned members	CPCONLY	Y10T403/344		200
Y10T403/345	10	Coplanar	CPCONLY	Y10T403/345		278
Y10T403/346	11	Additional rod held by encompassing means	CPCONLY	Y10T403/346		112
Y10T403/347	9	Polyhedral	CPCONLY	Y10T403/347		303
Y10T403/348	9	Parallel rods	CPCONLY	Y10T403/348		61
Y10T403/349	9	Coplanar	CPCONLY	Y10T403/349		131
Y10T403/36	8	Three or more serial joints, at least one diverse	CPCONLY	Y10T403/36		112
Y10T403/362	9	Nonaligned axes	CPCONLY	Y10T403/362		41
Y10T403/364	9	Separable intermediate joint	CPCONLY	Y10T403/364		183
Y10T403/366	10	Axially acting connector	CPCONLY	Y10T403/366		64
Y10T403/368	10	Screw or cam	CPCONLY	Y10T403/368		89
Y10T403/38	8	Laterally related rods independently joined to transverse surface	CPCONLY	Y10T403/38		175
Y10T403/40	8	Radially spaced members joined by independent coupling	CPCONLY	Y10T403/40		139
Y10T403/405	9	Flexible intermediate member	CPCONLY	Y10T403/405		98
Y10T403/44	8	Three or more members connected at single locus	CPCONLY	Y10T403/44		677
Y10T403/443	9	All encompassed	CPCONLY	Y10T403/443		232
Y10T403/447	9	Mutually contacting	CPCONLY	Y10T403/447		226
Y10T403/45	8	Flexibly connected rigid members	CPCONLY	Y10T403/45		474
Y10T403/451	9	Rigid sleeve encompasses flexible bushing	CPCONLY	Y10T403/451		94
Y10T403/452	10	Longitudinally divided sleeve	CPCONLY	Y10T403/452		57
Y10T403/453	9	Flexible sleeve-type coupling	CPCONLY	Y10T403/453		160
Y10T403/454	9	Connecting pin traverses radially interposed elastomer	CPCONLY	Y10T403/454		183
Y10T403/455	9	Elastomer interposed between radially spaced members	CPCONLY	Y10T403/455		424
Y10T403/456	10	Elastomer encompasses shoulder on inner member	CPCONLY	Y10T403/456		123
Y10T403/457	10	including axially acting compressing means	CPCONLY	Y10T403/457		156
Y10T403/458	10	Composite bushing with elastomeric component	CPCONLY	Y10T403/458		244
Y10T403/459	9	Helical spring type coupling	CPCONLY	Y10T403/459		305
Y10T403/46	8	Rod end to transverse side of member	CPCONLY	Y10T403/46		1036
Y10T403/4602	9	Corner joint	CPCONLY	Y10T403/4602		820
Y10T403/47	8	Molded joint	CPCONLY	Y10T403/47		396
Y10T403/471	9	And independent connection	CPCONLY	Y10T403/471		154
Y10T403/472	9	including mechanical interlock	CPCONLY	Y10T403/472		404
Y10T403/473	9	Socket or open cup for bonding material	CPCONLY	Y10T403/473		338
Y10T403/477	9	Fusion bond, e.g., weld, etc.	CPCONLY	Y10T403/477		551
Y10T403/48	8	Shrunk fit	CPCONLY	Y10T403/48		221
Y10T403/49	8	Member deformed in situ	CPCONLY	Y10T403/49		611
Y10T403/4916	9	Interposed deforming element contacts socket bottom	CPCONLY	Y10T403/4916		94
Y10T403/4924	9	Inner member is expanded by longitudinally inserted element	CPCONLY	Y10T403/4924		166
Y10T403/4933	9	by separate, deformable element	CPCONLY	Y10T403/4933		171
Y10T403/4941	9	Deformation occurs simultaneously with action of separate, diverse function, joint component	CPCONLY	Y10T403/4941		210
Y10T403/4949	9	Deforming component is inserted section	CPCONLY	Y10T403/4949		196
Y10T403/4958	9	Separate deforming means remains with joint assembly	CPCONLY	Y10T403/4958		276
Y10T403/4966	9	Deformation occurs simultaneously with assembly	CPCONLY	Y10T403/4966		674
Y10T403/4974	9	by piercing	CPCONLY	Y10T403/4974		354
Y10T403/4983	9	Diverse resistance to lateral deforming force	CPCONLY	Y10T403/4983		268
Y10T403/4991	9	Both members deformed	CPCONLY	Y10T403/4991		280
Y10T403/50	8	Bridged by diverse connector	CPCONLY	Y10T403/50		259
Y10T403/51	8	including spaced, diverse connections	CPCONLY	Y10T403/51		184
Y10T403/53	8	Split end with laterally movable opposed portions	CPCONLY	Y10T403/53		195
Y10T403/535	9	with separate force-applying means	CPCONLY	Y10T403/535		559
Y10T403/54	8	Flexible member is joint component	CPCONLY	Y10T403/54		585
Y10T403/55	8	Member ends joined by inserted section	CPCONLY	Y10T403/55		757
Y10T403/551	9	Externally bridged	CPCONLY	Y10T403/551		221
Y10T403/553	9	Laterally inserted section	CPCONLY	Y10T403/553		324
Y10T403/555	9	Angle section	CPCONLY	Y10T403/555		326
Y10T403/556	9	Section threaded to member	CPCONLY	Y10T403/556		314
Y10T403/557	9	Expansible section	CPCONLY	Y10T403/557		439
Y10T403/559	9	Fluted or splined section	CPCONLY	Y10T403/559		272
Y10T403/57	8	Distinct end coupler	CPCONLY	Y10T403/57		569
Y10T403/5706	9	Diverse serial connections	CPCONLY	Y10T403/5706		294
Y10T403/5713	10	Axially cleft coupler	CPCONLY	Y10T403/5713		89
Y10T403/5721	9	Single actuator for plural connections	CPCONLY	Y10T403/5721		94
Y10T403/5726	10	Axially biased end portions	CPCONLY	Y10T403/5726		59
Y10T403/5733	9	Plural opposed sockets	CPCONLY	Y10T403/5733		391
Y10T403/5741	9	Separate screw or pin-type connections	CPCONLY	Y10T403/5741		322
Y10T403/5746	9	Continuous thread	CPCONLY	Y10T403/5746		134
Y10T403/5753	9	having separable end caps or plugs	CPCONLY	Y10T403/5753		109
Y10T403/5761	9	Interrupted periphery, e.g., split or segmental, etc.	CPCONLY	Y10T403/5761		123
Y10T403/5766	10	Axially divided segments	CPCONLY	Y10T403/5766		131
Y10T403/5773	11	Interfitting	CPCONLY	Y10T403/5773		102
Y10T403/5781	11	Bolted	CPCONLY	Y10T403/5781		214
Y10T403/5786	10	Split	CPCONLY	Y10T403/5786		190
Y10T403/5793	9	including member wedging or camming means	CPCONLY	Y10T403/5793		468
Y10T403/59	8	Manually releaseable latch type	CPCONLY	Y10T403/59		645
Y10T403/591	9	having operating mechanism	CPCONLY	Y10T403/591		435
Y10T403/592	10	Ball detent	CPCONLY	Y10T403/592		280
Y10T403/593	10	Remotely actuated	CPCONLY	Y10T403/593		214
Y10T403/595	10	Lever	CPCONLY	Y10T403/595		468
Y10T403/597	9	Swiveled bolt	CPCONLY	Y10T403/597		87
Y10T403/598	9	Transversely sliding pin	CPCONLY	Y10T403/598		356
Y10T403/599	9	Spring biased manipulator	CPCONLY	Y10T403/599		786
Y10T403/60	8	Biased catch or latch	CPCONLY	Y10T403/60		819
Y10T403/602	9	by separate spring	CPCONLY	Y10T403/602		587
Y10T403/604	10	Radially sliding catch	CPCONLY	Y10T403/604		549
Y10T403/606	9	Leaf spring	CPCONLY	Y10T403/606		681
Y10T403/608	9	Pivoted	CPCONLY	Y10T403/608		340
Y10T403/61	8	Side slide: elongated co-linear members	CPCONLY	Y10T403/61		340
Y10T403/65	8	Scarf	CPCONLY	Y10T403/65		142
Y10T403/655	9	Mirror images	CPCONLY	Y10T403/655		233
Y10T403/66	8	Interfitted members with external bridging piece	CPCONLY	Y10T403/66		378
Y10T403/67	8	Thimble: screw or cam	CPCONLY	Y10T403/67		217
Y10T403/70	8	Interfitted members	CPCONLY	Y10T403/70		756
Y10T403/7001	9	Crossed rods	CPCONLY	Y10T403/7001		210
Y10T403/7003	10	One rod is encompassed by the other	CPCONLY	Y10T403/7003		224
Y10T403/7005	9	Lugged member, rotary engagement	CPCONLY	Y10T403/7005		718
Y10T403/7007	10	Bayonet joint	CPCONLY	Y10T403/7007		568
Y10T403/7009	9	Rotary binding cam or wedge	CPCONLY	Y10T403/7009		362
Y10T403/7011	10	Radially interposed shim or bushing	CPCONLY	Y10T403/7011		174
Y10T403/7013	11	Arcuate slip	CPCONLY	Y10T403/7013		90
Y10T403/7016	9	Diametric end slot is joint component	CPCONLY	Y10T403/7016		300
Y10T403/7018	9	including separably interposed key	CPCONLY	Y10T403/7018		464
Y10T403/7021	10	Axially extending	CPCONLY	Y10T403/7021		426
Y10T403/7022	11	Resilient	CPCONLY	Y10T403/7022		127
Y10T403/7024	11	Longitudinally stepped or tapered	CPCONLY	Y10T403/7024		204
Y10T403/7026	9	Longitudinally splined or fluted rod	CPCONLY	Y10T403/7026		241
Y10T403/7028	10	Splayed or having a cam surface for anti-backlash	CPCONLY	Y10T403/7028		93
Y10T403/7031	10	Rod designed to be manipulable, e.g., twistable, within coupling for quick disconnect	CPCONLY	Y10T403/7031		34
Y10T403/7032	10	including a means, e.g., spring biased portion, for misalignment correction	CPCONLY	Y10T403/7032		56
Y10T403/7033	10	including a lock or retainer	CPCONLY	Y10T403/7033		368
Y10T403/7035	10	Specific angle or shape of rib, key, groove, or shoulder	CPCONLY	Y10T403/7035		290
Y10T403/7041	9	including set screw	CPCONLY	Y10T403/7041		884
Y10T403/7045	9	Interdigitated ends	CPCONLY	Y10T403/7045		451
Y10T403/7047	9	Radially interposed shim or bushing	CPCONLY	Y10T403/7047		488
Y10T403/7049	10	Biased by distinct radially acting means	CPCONLY	Y10T403/7049		168
Y10T403/7051	10	Wedging or camming	CPCONLY	Y10T403/7051		213
Y10T403/7052	11	Engaged by axial movement	CPCONLY	Y10T403/7052		290
Y10T403/7054	12	Plural, circumferentially related shims between members	CPCONLY	Y10T403/7054		360
Y10T403/7056	12	Threaded actuator	CPCONLY	Y10T403/7056		700
Y10T403/7058	12	Split or slotted bushing	CPCONLY	Y10T403/7058		535
Y10T403/7061	10	Resilient	CPCONLY	Y10T403/7061		410
Y10T403/7062	9	Clamped members	CPCONLY	Y10T403/7062		630
Y10T403/7064	10	by wedge or cam	CPCONLY	Y10T403/7064		270
Y10T403/7066	11	having actuator	CPCONLY	Y10T403/7066		313
Y10T403/7067	12	Threaded actuator	CPCONLY	Y10T403/7067		281
Y10T403/7069	13	Axially oriented	CPCONLY	Y10T403/7069		336
Y10T403/7071	12	Lever actuator	CPCONLY	Y10T403/7071		147
Y10T403/7075	9	including discrete retainer	CPCONLY	Y10T403/7075		550
Y10T403/7077	10	for telescoping members	CPCONLY	Y10T403/7077		573
Y10T403/7079	11	Transverse pin	CPCONLY	Y10T403/7079		378
Y10T403/7081	12	Multiple retainers	CPCONLY	Y10T403/7081		63
Y10T403/7083	12	having means to prevent removal of retainer	CPCONLY	Y10T403/7083		94
Y10T403/7084	12	Bolt, rivet, or screw	CPCONLY	Y10T403/7084		261
Y10T403/7086	12	Wedge pin	CPCONLY	Y10T403/7086		150
Y10T403/7088	12	Sliding pin	CPCONLY	Y10T403/7088		133
Y10T403/7091	12	Expansible retainer	CPCONLY	Y10T403/7091		45
Y10T403/7098	9	Non-circular rod section is joint component	CPCONLY	Y10T403/7098		350
Y10T403/71	8	Rod side to plate or side	CPCONLY	Y10T403/71		326
Y10T403/7105	9	Connected by double clamp	CPCONLY	Y10T403/7105		284
Y10T403/7111	9	Shackle is integral with or independently attached to proximate side of plate or other side	CPCONLY	Y10T403/7111		128
Y10T403/7117	9	Flanged or grooved rod	CPCONLY	Y10T403/7117		319
Y10T403/7123	9	Traversed by connector	CPCONLY	Y10T403/7123		486
Y10T403/7129	9	Laterally spaced rods	CPCONLY	Y10T403/7129		317
Y10T403/7135	10	by separable shim or bushing in connector	CPCONLY	Y10T403/7135		175
Y10T403/7141	10	Plural channels in connector	CPCONLY	Y10T403/7141		570
Y10T403/7147	9	Connected by flexible tie	CPCONLY	Y10T403/7147		156
Y10T403/7152	9	Lapped rod ends	CPCONLY	Y10T403/7152		397
Y10T403/7158	9	Diagonal connector	CPCONLY	Y10T403/7158		76
Y10T403/7164	9	One rod held between bight and other rod extending through aperture in leg of connector	CPCONLY	Y10T403/7164		120
Y10T403/7171	9	Two rods encompassed by single connector	CPCONLY	Y10T403/7171		465
Y10T403/7176	9	Resilient clip	CPCONLY	Y10T403/7176		312
Y10T403/7182	9	Yoke or ring-type connector	CPCONLY	Y10T403/7182		218
Y10T403/7188	10	Rod received in open channel	CPCONLY	Y10T403/7188		160
Y10T403/7194	9	Crossed rods	CPCONLY	Y10T403/7194		430
Y10T403/75	8	having a joining piece extending through aligned openings in plural members	CPCONLY	Y10T403/75		993
Y10T403/76	8	having a cam, wedge, or tapered portion	CPCONLY	Y10T403/76		496
Y10T407/00	7	Cutters, for shaping	CPCONLY	Y10T407/00		1
Y10T407/10	8	including noncutting work modifying means	CPCONLY	Y10T407/10		98
Y10T407/11	8	including chip breaker, guide or deflector detachable from tool and tool holder	CPCONLY	Y10T407/11		64
Y10T407/112	9	Adjustable relative to cutting edge	CPCONLY	Y10T407/112		32
Y10T407/114	10	including adjusting means	CPCONLY	Y10T407/114		37
Y10T407/116	9	Attached to or integral with tool clamping jaw	CPCONLY	Y10T407/116		85
Y10T407/118	9	Chip breaker	CPCONLY	Y10T407/118		66
Y10T407/12	8	Freely movable cutting edge	CPCONLY	Y10T407/12		64
Y10T407/13	8	Yieldable tool	CPCONLY	Y10T407/13		75
Y10T407/134	9	Resiliently mounted tool	CPCONLY	Y10T407/134		109
Y10T407/137	10	including yield stress or flexure limit adjusting means	CPCONLY	Y10T407/137		69
Y10T407/14	8	with means to apply fluid to cutting tool	CPCONLY	Y10T407/14		432
Y10T407/15	8	Rotary broach	CPCONLY	Y10T407/15		58
Y10T407/16	8	Rectilinear broach	CPCONLY	Y10T407/16		124
Y10T407/1614	9	Hollow tool for surrounding workpiece	CPCONLY	Y10T407/1614		55
Y10T407/1628	9	including holder having seat for inserted tool	CPCONLY	Y10T407/1628		68
Y10T407/1642	10	Annular tool	CPCONLY	Y10T407/1642		35
Y10T407/1657	10	including single tooth	CPCONLY	Y10T407/1657		52
Y10T407/1671	9	Plural tooth groups	CPCONLY	Y10T407/1671		107
Y10T407/1685	9	including sequentially acting teeth of stepped cutting width	CPCONLY	Y10T407/1685		43
Y10T407/17	8	Gear cutting tool	CPCONLY	Y10T407/17		111
Y10T407/1705	9	Face mill gear cutting tool	CPCONLY	Y10T407/1705		79
Y10T407/171	10	Adjustable teeth	CPCONLY	Y10T407/171		57
Y10T407/1715	9	Hob	CPCONLY	Y10T407/1715		88
Y10T407/172	10	Thread cutting	CPCONLY	Y10T407/172		49
Y10T407/1725	10	including holder having seat for inserted tool	CPCONLY	Y10T407/1725		54
Y10T407/173	10	for cutting involute gear tooth	CPCONLY	Y10T407/173		80
Y10T407/1735	9	Rotary, gear shaving cutting tool	CPCONLY	Y10T407/1735		75
Y10T407/174	9	Gear generating, revolving shaper cutting tool	CPCONLY	Y10T407/174		70
Y10T407/1745	9	Rotary, tooth form cutting tool	CPCONLY	Y10T407/1745		82
Y10T407/18	8	File or rasp	CPCONLY	Y10T407/18		175
Y10T407/1805	9	Flexible blade or carrier therefor	CPCONLY	Y10T407/1805		63
Y10T407/181	9	Tyre rasp	CPCONLY	Y10T407/181		87
Y10T407/1815	9	Rotary file or round disc	CPCONLY	Y10T407/1815		121
Y10T407/182	9	Composite, diverse sector, or assembled	CPCONLY	Y10T407/182		108
Y10T407/1825	9	Handle or holder, per se	CPCONLY	Y10T407/1825		289
Y10T407/19	8	Rotary cutting tool	CPCONLY	Y10T407/19		210
Y10T407/1902	9	Gang	CPCONLY	Y10T407/1902		173
Y10T407/1904	9	Composite body of diverse material	CPCONLY	Y10T407/1904		90
Y10T407/1906	9	including holder [i.e., head] having seat for inserted tool	CPCONLY	Y10T407/1906		221
Y10T407/1908	10	Face or end mill	CPCONLY	Y10T407/1908		238
Y10T407/191	11	Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools	CPCONLY	Y10T407/191		172
Y10T407/1912	11	Tool adjustable relative to holder	CPCONLY	Y10T407/1912		180
Y10T407/1914	12	Radially	CPCONLY	Y10T407/1914		123
Y10T407/1916	13	And axially	CPCONLY	Y10T407/1916		115
Y10T407/1918	14	Selectively	CPCONLY	Y10T407/1918		78
Y10T407/192	11	with separate means to fasten tool to holder	CPCONLY	Y10T407/192		362
Y10T407/1922	12	Wedge clamp element	CPCONLY	Y10T407/1922		287
Y10T407/1924	11	Specified tool shape	CPCONLY	Y10T407/1924		490
Y10T407/1926	10	Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools	CPCONLY	Y10T407/1926		118
Y10T407/1928	10	Tool adjustable relative to holder	CPCONLY	Y10T407/1928		130
Y10T407/193	11	Radially	CPCONLY	Y10T407/193		299
Y10T407/1932	10	with means to fasten tool seat to holder	CPCONLY	Y10T407/1932		257
Y10T407/1934	10	with separate means to fasten tool to holder	CPCONLY	Y10T407/1934		227
Y10T407/1936	11	Apertured tool	CPCONLY	Y10T407/1936		320
Y10T407/1938	11	Wedge clamp element	CPCONLY	Y10T407/1938		297
Y10T407/194	12	Resilient clamp jaw	CPCONLY	Y10T407/194		101
Y10T407/1942	10	Peripherally spaced tools	CPCONLY	Y10T407/1942		188
Y10T407/1944	11	Sectional support	CPCONLY	Y10T407/1944		105
Y10T407/1946	9	Face or end mill	CPCONLY	Y10T407/1946		349
Y10T407/1948	10	with cutting edge entirely across end of tool [e.g., router bit, end mill, etc.]	CPCONLY	Y10T407/1948		372
Y10T407/195	9	Compound tooth arrangement	CPCONLY	Y10T407/195		80
Y10T407/1952	9	Having peripherally spaced teeth	CPCONLY	Y10T407/1952		137
Y10T407/1954	10	Axially tapering tool	CPCONLY	Y10T407/1954		43
Y10T407/1956	10	Circumferentially staggered	CPCONLY	Y10T407/1956		120
Y10T407/1958	11	Plural teeth spaced about a helix	CPCONLY	Y10T407/1958		113
Y10T407/196	10	Varying in cutting edge profile	CPCONLY	Y10T407/196		93
Y10T407/1962	10	Specified tooth shape or spacing	CPCONLY	Y10T407/1962		333
Y10T407/1964	11	Arcuate cutting edge	CPCONLY	Y10T407/1964		129
Y10T407/1966	12	Helical tooth	CPCONLY	Y10T407/1966		141
Y10T407/20	8	Profiled circular tool	CPCONLY	Y10T407/20		169
Y10T407/21	8	Arc segment tool	CPCONLY	Y10T407/21		62
Y10T407/22	8	including holder having seat for inserted tool	CPCONLY	Y10T407/22		184
Y10T407/2202	9	Plural spaced seats and common holder	CPCONLY	Y10T407/2202		145
Y10T407/2204	10	Relatively adjustable seats	CPCONLY	Y10T407/2204		27
Y10T407/2206	10	Simultaneously usable	CPCONLY	Y10T407/2206		108
Y10T407/2208	9	Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools	CPCONLY	Y10T407/2208		52
Y10T407/221	10	Adjustable tool	CPCONLY	Y10T407/221		47
Y10T407/2212	9	with tool ejector	CPCONLY	Y10T407/2212		39
Y10T407/2214	9	with separate means to adjust tool to and fro relative to holder	CPCONLY	Y10T407/2214		63
Y10T407/2216	10	with indicator	CPCONLY	Y10T407/2216		36
Y10T407/2218	10	Plural provisions for adjustment	CPCONLY	Y10T407/2218		39
Y10T407/222	10	by moving tool seat	CPCONLY	Y10T407/222		71
Y10T407/2222	9	Tool adjustable relative to holder	CPCONLY	Y10T407/2222		83
Y10T407/2224	10	with indicator	CPCONLY	Y10T407/2224		58
Y10T407/2226	10	Plural provisions for adjustment	CPCONLY	Y10T407/2226		82
Y10T407/2228	11	Plural interfering seats	CPCONLY	Y10T407/2228		61
Y10T407/223	11	including pivotable seat or tool	CPCONLY	Y10T407/223		62
Y10T407/2232	12	with detent	CPCONLY	Y10T407/2232		32
Y10T407/2234	12	Pivoted seat	CPCONLY	Y10T407/2234		103
Y10T407/2236	13	And pivotable tool	CPCONLY	Y10T407/2236		36
Y10T407/2238	10	by adjustable or replaceable stop	CPCONLY	Y10T407/2238		54
Y10T407/224	11	Adjustable	CPCONLY	Y10T407/224		95
Y10T407/2242	12	Screw	CPCONLY	Y10T407/2242		141
Y10T407/2244	10	by movement of seat relative to holder	CPCONLY	Y10T407/2244		77
Y10T407/2246	11	Pivoted seat	CPCONLY	Y10T407/2246		107
Y10T407/2248	10	Pivoted tool	CPCONLY	Y10T407/2248		73
Y10T407/225	10	Resiliently biased tool clamping jaw	CPCONLY	Y10T407/225		138
Y10T407/2252	10	Rectilinearly	CPCONLY	Y10T407/2252		146
Y10T407/2254	11	including rotatable cam clamp element	CPCONLY	Y10T407/2254		50
Y10T407/2256	11	including wedge clamp element	CPCONLY	Y10T407/2256		130
Y10T407/2258	12	And guide or detent	CPCONLY	Y10T407/2258		83
Y10T407/226	11	including detent	CPCONLY	Y10T407/226		91
Y10T407/2262	11	Tool gripped directly by set screw	CPCONLY	Y10T407/2262		90
Y10T407/2264	11	Slidable jaw	CPCONLY	Y10T407/2264		46
Y10T407/2266	9	Holder adapted for tools of different shape	CPCONLY	Y10T407/2266		123
Y10T407/2268	9	with chip breaker, guide or deflector	CPCONLY	Y10T407/2268		107
Y10T407/227	9	with separate means to fasten tool seat to holder	CPCONLY	Y10T407/227		312
Y10T407/2272	9	with separate means to fasten tool to holder	CPCONLY	Y10T407/2272		256
Y10T407/2274	10	Apertured tool	CPCONLY	Y10T407/2274		280
Y10T407/2276	11	with means projecting through aperture to force tool laterally against reaction surface	CPCONLY	Y10T407/2276		217
Y10T407/2278	12	Tilting clamp element and separate means to tilt same	CPCONLY	Y10T407/2278		90
Y10T407/228	10	Rotatable cam clamp element	CPCONLY	Y10T407/228		51
Y10T407/2282	10	including tool holding clamp and clamp actuator	CPCONLY	Y10T407/2282		304
Y10T407/2284	11	Wedge clamp element	CPCONLY	Y10T407/2284		192
Y10T407/2286	11	Resiliently biased clamp jaw	CPCONLY	Y10T407/2286		164
Y10T407/2288	12	Integral with holder	CPCONLY	Y10T407/2288		197
Y10T407/229	11	Pivoted jaw	CPCONLY	Y10T407/229		70
Y10T407/2292	11	Slidable jaw	CPCONLY	Y10T407/2292		152
Y10T407/23	8	including tool having plural alternatively usable cutting edges	CPCONLY	Y10T407/23		1299
Y10T407/235	9	with integral chip breaker, guide or deflector	CPCONLY	Y10T407/235		782
Y10T407/24	8	with chip breaker, guide or deflector	CPCONLY	Y10T407/24		412
Y10T407/245	9	comprising concave surface in cutting face of tool	CPCONLY	Y10T407/245		357
Y10T407/25	8	including cut off tool	CPCONLY	Y10T407/25		455
Y10T407/26	8	comprising cutting edge bonded to tool shank	CPCONLY	Y10T407/26		419
Y10T407/27	8	comprising tool of specific chemical composition	CPCONLY	Y10T407/27		814
Y10T407/28	8	Miscellaneous	CPCONLY	Y10T407/28		410
Y10T408/00	7	Cutting by use of rotating axially moving tool	CPCONLY	Y10T408/00		
Y10T408/03	8	Processes	CPCONLY	Y10T408/03		1469
Y10T408/04	9	Bit detachable	CPCONLY	Y10T408/04		49
Y10T408/05	8	with means to weigh or test work or product	CPCONLY	Y10T408/05		130
Y10T408/08	8	with means to regulate operation by use of templet, tape, card, or other replaceable information supply	CPCONLY	Y10T408/08		361
Y10T408/10	8	with interlock between machine elements	CPCONLY	Y10T408/10		92
Y10T408/13	8	with randomly-actuated stopping means	CPCONLY	Y10T408/13		39
Y10T408/14	9	Responsive to condition of Tool or tool-drive	CPCONLY	Y10T408/14		182
Y10T408/15	9	Responsive to condition of work or product	CPCONLY	Y10T408/15		45
Y10T408/16	8	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T408/16		190
Y10T408/165	9	to control Tool rotation	CPCONLY	Y10T408/165		211
Y10T408/17	9	to control infeed	CPCONLY	Y10T408/17		216
Y10T408/172	10	Responsive to Tool	CPCONLY	Y10T408/172		341
Y10T408/173	10	Responsive to work	CPCONLY	Y10T408/173		153
Y10T408/175	9	to control relative positioning of Tool and work	CPCONLY	Y10T408/175		347
Y10T408/18	8	with stopping upon completion of prescribed operation	CPCONLY	Y10T408/18		281
Y10T408/20	9	Responsive to condition of work or product	CPCONLY	Y10T408/20		48
Y10T408/21	8	with signal, indicator, illuminator or optical means	CPCONLY	Y10T408/21		694
Y10T408/23	8	including means to cause Tool to progressively vibrate toward work	CPCONLY	Y10T408/23		247
Y10T408/26	8	with means to condition tool	CPCONLY	Y10T408/26		51
Y10T408/29	8	with means to deForm work temporarily	CPCONLY	Y10T408/29		56
Y10T408/31	8	Convertible cutting means	CPCONLY	Y10T408/31		260
Y10T408/33	9	Utilizing common cutting Tool	CPCONLY	Y10T408/33		65
Y10T408/34	8	Combined cutting means	CPCONLY	Y10T408/34		149
Y10T408/344	9	including Tool operating on rotating work	CPCONLY	Y10T408/344		62
Y10T408/348	9	Plural other type cutting means	CPCONLY	Y10T408/348		60
Y10T408/35	10	including plural rotating tools	CPCONLY	Y10T408/35		107
Y10T408/352	9	including rotating cutter other than rotating, axially moving Tool	CPCONLY	Y10T408/352		192
Y10T408/353	10	Crystalline cutter	CPCONLY	Y10T408/353		51
Y10T408/355	10	Utilized in cutting work or product to length	CPCONLY	Y10T408/355		60
Y10T408/3555	11	Adapted to cut entire thickness of work at one pass	CPCONLY	Y10T408/3555		48
Y10T408/356	9	including plunging [single stroke] cutter	CPCONLY	Y10T408/356		142
Y10T408/36	8	Machine including plural tools	CPCONLY	Y10T408/36		70
Y10T408/365	9	Axes of tools moving with work during operation	CPCONLY	Y10T408/365		28
Y10T408/367	10	including means to infeed Tool and means to infeed work or including coaxial tools	CPCONLY	Y10T408/367		19
Y10T408/368	10	Plural work stations	CPCONLY	Y10T408/368		64
Y10T408/37	9	Turret of tools	CPCONLY	Y10T408/37		377
Y10T408/375	9	Coaxial tools	CPCONLY	Y10T408/375		128
Y10T408/378	10	Coaxial, opposed tools	CPCONLY	Y10T408/378		109
Y10T408/3784	11	with additional, converging Tool	CPCONLY	Y10T408/3784		60
Y10T408/3788	11	Plural pairs of coaxial, opposed tools	CPCONLY	Y10T408/3788		96
Y10T408/3792	11	with means to sequentially feed tools toward work	CPCONLY	Y10T408/3792		55
Y10T408/3796	11	with interconnected means to simultaneously feed tools	CPCONLY	Y10T408/3796		96
Y10T408/38	9	Plural, simultaneously operational tools	CPCONLY	Y10T408/38		194
Y10T408/3806	10	with plural simultaneously operational work stations	CPCONLY	Y10T408/3806		127
Y10T408/3809	11	Successively acting on workpiece	CPCONLY	Y10T408/3809		86
Y10T408/381	12	Pivotally mounted, work-advancing, work-supporting means, pivot-axis parallel to tool-axis	CPCONLY	Y10T408/381		102
Y10T408/3811	10	with provision for adjustment of relationship of axes	CPCONLY	Y10T408/3811		214
Y10T408/3817	10	at least one Tool driven by orbiting wrist plate	CPCONLY	Y10T408/3817		46
Y10T408/3822	10	at least one Tool including flexible drive connection	CPCONLY	Y10T408/3822		64
Y10T408/3828	10	with work-infeed	CPCONLY	Y10T408/3828		103
Y10T408/3833	10	with means to advance work relative to Tool	CPCONLY	Y10T408/3833		109
Y10T408/3839	10	with presser-foot	CPCONLY	Y10T408/3839		82
Y10T408/3844	10	with tool-opposing, work-engaging surface	CPCONLY	Y10T408/3844		137
Y10T408/385	9	Rotatable about parallel axes	CPCONLY	Y10T408/385		217
Y10T408/39	8	with radially outer limit of cutting edge moving to define cylinder partially, but not entirely encircled by work	CPCONLY	Y10T408/39		233
Y10T408/42	8	Axis of Tool moving with work during operation	CPCONLY	Y10T408/42		26
Y10T408/44	8	with means to apply transient, fluent medium to work or product	CPCONLY	Y10T408/44		568
Y10T408/45	9	including Tool with duct	CPCONLY	Y10T408/45		342
Y10T408/453	10	and means to move gaseous fluid by application of vacuum	CPCONLY	Y10T408/453		96
Y10T408/455	10	Conducting channel extending to end of Tool	CPCONLY	Y10T408/455		561
Y10T408/458	10	including nozzle	CPCONLY	Y10T408/458		104
Y10T408/46	9	including nozzle	CPCONLY	Y10T408/46		259
Y10T408/47	8	with work-infeed means	CPCONLY	Y10T408/47		161
Y10T408/476	9	Driven by fluid motor	CPCONLY	Y10T408/476		80
Y10T408/482	9	Driven by means having sliding engagement therewith	CPCONLY	Y10T408/482		130
Y10T408/488	9	Driven by lever or connecting link	CPCONLY	Y10T408/488		109
Y10T408/494	9	and gear to drive infeed means	CPCONLY	Y10T408/494		80
Y10T408/50	8	with product handling or receiving means	CPCONLY	Y10T408/50		714
Y10T408/51	9	Ejector	CPCONLY	Y10T408/51		236
Y10T408/52	8	with work advancing or guiding means	CPCONLY	Y10T408/52		195
Y10T408/54	9	Means to intermittently advance work	CPCONLY	Y10T408/54		222
Y10T408/545	10	Rotary, work-supporting means	CPCONLY	Y10T408/545		221
Y10T408/55	8	with work-engaging structure other than Tool or tool-support	CPCONLY	Y10T408/55		514
Y10T408/551	9	with means actuated by work to release Tool from fixed position in Tool support	CPCONLY	Y10T408/551		100
Y10T408/552	10	Adapted to engage work at tool-axis	CPCONLY	Y10T408/552		71
Y10T408/553	9	Centering means adapted to be replaced by Tool	CPCONLY	Y10T408/553		118
Y10T408/554	9	Magnetic or suction means	CPCONLY	Y10T408/554		228
Y10T408/556	9	Tool supporting wheel	CPCONLY	Y10T408/556		113
Y10T408/5565	10	Wheel-axis parallel to tool-axis	CPCONLY	Y10T408/5565		69
Y10T408/557	9	Frictionally engaging sides of opening in work	CPCONLY	Y10T408/557		290
Y10T408/558	10	Opening coaxial with Tool	CPCONLY	Y10T408/558		216
Y10T408/5583	11	Engaging sides of opening being enlarged by Tool	CPCONLY	Y10T408/5583		136
Y10T408/5584	12	Engaging surface axially advanced of tool-action	CPCONLY	Y10T408/5584		217
Y10T408/5586	12	Engaging surface subsequent to tool-action on that surface	CPCONLY	Y10T408/5586		132
Y10T408/5587	11	Valve fitting	CPCONLY	Y10T408/5587		362
Y10T408/559	9	Funnel like work-engaging surface cooperating with protuberance on work	CPCONLY	Y10T408/559		88
Y10T408/56	9	Adapted to "form" recession in work	CPCONLY	Y10T408/56		58
Y10T408/5605	10	Recession at tool-axis	CPCONLY	Y10T408/5605		70
Y10T408/561	9	Having tool-opposing, work-engaging surface	CPCONLY	Y10T408/561		245
Y10T408/5612	10	Tool having shiftable tool-axis	CPCONLY	Y10T408/5612		265
Y10T408/5614	10	Angularly adjustable surface	CPCONLY	Y10T408/5614		211
Y10T408/5616	11	Adjustable about axis that is parallel to tool-axis	CPCONLY	Y10T408/5616		98
Y10T408/5617	10	Laterally adjustable surface	CPCONLY	Y10T408/5617		267
Y10T408/5619	10	Flexible or concatenated member	CPCONLY	Y10T408/5619		148
Y10T408/5621	10	Connected to Tool through opening being enlarged by Tool	CPCONLY	Y10T408/5621		78
Y10T408/5622	11	Plural, coaxially opposing, work-engaging means	CPCONLY	Y10T408/5622		85
Y10T408/5623	10	with presser foot	CPCONLY	Y10T408/5623		282
Y10T408/56238	11	Encompassed by Tool during cut	CPCONLY	Y10T408/56238		46
Y10T408/56245	11	including tool-guide [or bushing]	CPCONLY	Y10T408/56245		455
Y10T408/56253	11	Base supported machine	CPCONLY	Y10T408/56253		137
Y10T408/5626	10	with means to move Tool relative to other work-engaging structure along tool-axis	CPCONLY	Y10T408/5626		213
Y10T408/5627	11	Having sliding engagement therewith	CPCONLY	Y10T408/5627		87
Y10T408/56275	12	Screw coaxial with Tool	CPCONLY	Y10T408/56275		162
Y10T408/5628	10	Tool having screw-thread engaging frame to cause infeed	CPCONLY	Y10T408/5628		102
Y10T408/563	9	Work-gripping clamp	CPCONLY	Y10T408/563		436
Y10T408/5633	10	Adapted to coaxially grip round work	CPCONLY	Y10T408/5633		233
Y10T408/56337	11	Oppositely moving lateral clamps	CPCONLY	Y10T408/56337		132
Y10T408/5634	12	Three or more moving clamps	CPCONLY	Y10T408/5634		94
Y10T408/56343	11	Base supported clamp	CPCONLY	Y10T408/56343		59
Y10T408/5635	10	Oppositely moving lateral clamps	CPCONLY	Y10T408/5635		110
Y10T408/5638	10	Adjustable relative to tool-axis	CPCONLY	Y10T408/5638		123
Y10T408/564	9	Movable relative to Tool along tool-axis	CPCONLY	Y10T408/564		274
Y10T408/5647	10	including means to move Tool	CPCONLY	Y10T408/5647		389
Y10T408/5653	10	with means to bias Tool away from work	CPCONLY	Y10T408/5653		338
Y10T408/566	9	Axially fixed to Tool	CPCONLY	Y10T408/566		100
Y10T408/5665	10	Work-engaging surface parallel to tool-axis	CPCONLY	Y10T408/5665		38
Y10T408/567	9	Adjustable, tool-guiding jig	CPCONLY	Y10T408/567		658
Y10T408/568	10	Guide bushing	CPCONLY	Y10T408/568		118
Y10T408/569	9	Bushing	CPCONLY	Y10T408/569		169
Y10T408/57	8	Tool-support with means to receive tool-position indicator	CPCONLY	Y10T408/57		89
Y10T408/60	8	Plural tool-assemblages	CPCONLY	Y10T408/60		222
Y10T408/62	9	Coaxial	CPCONLY	Y10T408/62		113
Y10T408/625	10	Spring biased	CPCONLY	Y10T408/625		47
Y10T408/63	8	Tool or tool-support with torque-applying ratchet	CPCONLY	Y10T408/63		68
Y10T408/637	9	with thrust applying means	CPCONLY	Y10T408/637		151
Y10T408/639	10	Reversible ratchet	CPCONLY	Y10T408/639		52
Y10T408/641	10	Double-acting ratchet	CPCONLY	Y10T408/641		61
Y10T408/643	9	Reversible ratchet	CPCONLY	Y10T408/643		77
Y10T408/65	8	Means to drive tool	CPCONLY	Y10T408/65		639
Y10T408/655	9	with specific Tool structure	CPCONLY	Y10T408/655		73
Y10T408/66	9	Friction gearing	CPCONLY	Y10T408/66		97
Y10T408/665	9	Universal or flexible drive connection to rotate Tool	CPCONLY	Y10T408/665		207
Y10T408/67	9	Belt and pulley	CPCONLY	Y10T408/67		195
Y10T408/675	9	including means to move Tool along tool-axis	CPCONLY	Y10T408/675		336
Y10T408/6757	10	Fluid means	CPCONLY	Y10T408/6757		534
Y10T408/6764	10	Laterally adjustable Tool	CPCONLY	Y10T408/6764		73
Y10T408/6771	10	with clutch means	CPCONLY	Y10T408/6771		138
Y10T408/6774	11	including plural speed drive	CPCONLY	Y10T408/6774		205
Y10T408/6776	11	Actuated by Tool movement	CPCONLY	Y10T408/6776		114
Y10T408/6779	10	Rack and pinion	CPCONLY	Y10T408/6779		259
Y10T408/6786	10	Manually moved lever	CPCONLY	Y10T408/6786		197
Y10T408/6793	10	Screw coaxial with Tool	CPCONLY	Y10T408/6793		371
Y10T408/68	8	Tool or tool-support with thrust-applying machine-engaging screw	CPCONLY	Y10T408/68		163
Y10T408/70	8	Tool or tool-support with torque-applying clutch	CPCONLY	Y10T408/70		227
Y10T408/72	9	Friction clutch	CPCONLY	Y10T408/72		148
Y10T408/73	8	Tool or tool-support with torque-applying spline	CPCONLY	Y10T408/73		135
Y10T408/75	9	Relative motion of splined shaft and tool-support causing release of Tool from operating position	CPCONLY	Y10T408/75		135
Y10T408/76	8	Tool-carrier with vibration-damping means	CPCONLY	Y10T408/76		273
Y10T408/78	8	Tool of specific diverse material	CPCONLY	Y10T408/78		375
Y10T408/81	8	Tool having crystalline cutting edge	CPCONLY	Y10T408/81		255
Y10T408/83	8	Tool-support with means to move Tool relative to tool-support	CPCONLY	Y10T408/83		176
Y10T408/85	9	to move radially	CPCONLY	Y10T408/85		267
Y10T408/852	10	with Tool releasing trigger	CPCONLY	Y10T408/852		96
Y10T408/853	11	and separate Tool setting means	CPCONLY	Y10T408/853		53
Y10T408/854	10	to move eccentrically mounted Tool	CPCONLY	Y10T408/854		125
Y10T408/855	11	Tool-support including plural, adjustable sections	CPCONLY	Y10T408/855		136
Y10T408/856	10	Moving means including pinion engaging rack-like surface of Tool	CPCONLY	Y10T408/856		74
Y10T408/858	10	Moving means including wedge, screw or cam	CPCONLY	Y10T408/858		304
Y10T408/8583	11	with resiliently urged Tool	CPCONLY	Y10T408/8583		226
Y10T408/85837	12	with spring retainer	CPCONLY	Y10T408/85837		74
Y10T408/85843	12	Resilient Tool or tool-support	CPCONLY	Y10T408/85843		217
Y10T408/8585	11	including oppositely moving, diverging tools	CPCONLY	Y10T408/8585		62
Y10T408/8588	11	Axially slidable moving-means	CPCONLY	Y10T408/8588		307
Y10T408/85884	12	Tool pivotally mounted on support	CPCONLY	Y10T408/85884		157
Y10T408/85888	12	Having axially spaced shoulders	CPCONLY	Y10T408/85888		58
Y10T408/85892	12	Screw driven wedge or cam	CPCONLY	Y10T408/85892		89
Y10T408/85893	13	Screw with axis radially spaced from tool-axis	CPCONLY	Y10T408/85893		48
Y10T408/85894	13	Annular wedge-collar	CPCONLY	Y10T408/85894		70
Y10T408/858945	14	Axially spaced tool-retaining collars	CPCONLY	Y10T408/858945		54
Y10T408/858946	15	with travelling wedge	CPCONLY	Y10T408/858946		30
Y10T408/858948	15	Tool having axially facing, collar-receiving groove	CPCONLY	Y10T408/858948		26
Y10T408/858949	15	including two-piece collar	CPCONLY	Y10T408/858949		22
Y10T408/85895	13	Traveling wedge	CPCONLY	Y10T408/85895		125
Y10T408/858953	14	Interfitting, tool-retaining wedge	CPCONLY	Y10T408/858953		79
Y10T408/858955	15	including separable interfitting element	CPCONLY	Y10T408/858955		71
Y10T408/858957	14	Having externally threaded shank connected to tool-support	CPCONLY	Y10T408/858957		107
Y10T408/85896	12	Annular wedge-collar	CPCONLY	Y10T408/85896		79
Y10T408/859	11	Rotary cam	CPCONLY	Y10T408/859		102
Y10T408/8591	12	Scroll plate	CPCONLY	Y10T408/8591		108
Y10T408/85913	13	Volute scroll	CPCONLY	Y10T408/85913		37
Y10T408/85915	13	with means to rotate scroll	CPCONLY	Y10T408/85915		92
Y10T408/85918	13	with adjustable means to limit scroll movement	CPCONLY	Y10T408/85918		42
Y10T408/8592	12	Coaxial with tool-axis	CPCONLY	Y10T408/8592		94
Y10T408/8593	11	Wedge moving perpendicular to tool-axis	CPCONLY	Y10T408/8593		104
Y10T408/8595	11	Pivotable tool-support	CPCONLY	Y10T408/8595		202
Y10T408/8598	11	Screw extending perpendicular to tool-axis	CPCONLY	Y10T408/8598		258
Y10T408/85985	12	Plural tools moved by diametrically opposed screws	CPCONLY	Y10T408/85985		107
Y10T408/85988	13	Screws mounted on common shaft	CPCONLY	Y10T408/85988		45
Y10T408/8599	12	Tool having pitch-stabilizing ridge	CPCONLY	Y10T408/8599		66
Y10T408/85995	12	with tool-holding clamp and clamp actuator	CPCONLY	Y10T408/85995		134
Y10T408/86	8	Tool-support with means to permit positioning of the Tool relative to support	CPCONLY	Y10T408/86		168
Y10T408/865	9	Pivotable Tool	CPCONLY	Y10T408/865		154
Y10T408/868	10	with multiple cutting positions	CPCONLY	Y10T408/868		183
Y10T408/87	9	Tool having stepped cutting edges	CPCONLY	Y10T408/87		98
Y10T408/8713	10	including means to permit both radial and axial positioning of edge	CPCONLY	Y10T408/8713		38
Y10T408/8725	10	including means to permit relative axial positioning of edges	CPCONLY	Y10T408/8725		81
Y10T408/8729	11	with work-engaging structure other than cutting edge	CPCONLY	Y10T408/8729		44
Y10T408/8734	11	including central Tool axially movable relative to support	CPCONLY	Y10T408/8734		54
Y10T408/8738	10	including inverse cutting edge	CPCONLY	Y10T408/8738		51
Y10T408/875	9	including means to "form" depression in work	CPCONLY	Y10T408/875		104
Y10T408/88	9	including central-lead	CPCONLY	Y10T408/88		53
Y10T408/885	9	including tool-holding clamp and clamp actuator	CPCONLY	Y10T408/885		156
Y10T408/888	10	Movable along tool-axis	CPCONLY	Y10T408/888		54
Y10T408/89	8	Tool or Tool with support	CPCONLY	Y10T408/89		426
Y10T408/892	9	with work-engaging structure detachable from cutting edge	CPCONLY	Y10T408/892		251
Y10T408/8923	10	Removable central lead	CPCONLY	Y10T408/8923		211
Y10T408/8925	10	Depth-limiting member	CPCONLY	Y10T408/8925		259
Y10T408/8928	10	Adjustable	CPCONLY	Y10T408/8928		78
Y10T408/893	9	Hollow milling Tool	CPCONLY	Y10T408/893		105
Y10T408/895	9	Having axial, core-receiving central portion	CPCONLY	Y10T408/895		727
Y10T408/8953	10	with lateral outlet	CPCONLY	Y10T408/8953		88
Y10T408/8957	10	and having stepped cutting edges	CPCONLY	Y10T408/8957		212
Y10T408/896	9	Having product-receiving chamber	CPCONLY	Y10T408/896		116
Y10T408/8967	10	and central lead-screw	CPCONLY	Y10T408/8967		39
Y10T408/8973	10	and central lead	CPCONLY	Y10T408/8973		72
Y10T408/898	9	Helical ribbon Tool	CPCONLY	Y10T408/898		27
Y10T408/899	9	Having inversely angled cutting edge	CPCONLY	Y10T408/899		249
Y10T408/90	10	and axially extending peripheral cutting spur	CPCONLY	Y10T408/90		104
Y10T408/901	9	Having axially extending peripheral cutting spur	CPCONLY	Y10T408/901		165
Y10T408/902	9	Having central lead-screw	CPCONLY	Y10T408/902		161
Y10T408/904	9	with pitch-stabilizing ridge	CPCONLY	Y10T408/904		209
Y10T408/9042	10	and radially spaced cutting edge	CPCONLY	Y10T408/9042		53
Y10T408/9044	10	including cutting teeth of different width	CPCONLY	Y10T408/9044		58
Y10T408/9045	11	and different root circles	CPCONLY	Y10T408/9045		67
Y10T408/9046	10	including tapered section	CPCONLY	Y10T408/9046		79
Y10T408/90467	11	and relieved cutting edge	CPCONLY	Y10T408/90467		60
Y10T408/90473	11	including work-embracing cutting edges	CPCONLY	Y10T408/90473		73
Y10T408/9048	10	Extending outwardly from tool-axis	CPCONLY	Y10T408/9048		243
Y10T408/905	9	Having stepped cutting edges	CPCONLY	Y10T408/905		279
Y10T408/906	10	Axially spaced	CPCONLY	Y10T408/906		573
Y10T408/9065	11	with central lead	CPCONLY	Y10T408/9065		197
Y10T408/907	9	including detailed shank	CPCONLY	Y10T408/907		772
Y10T408/909	9	Having peripherally spaced cutting edges	CPCONLY	Y10T408/909		491
Y10T408/9093	10	Each formed by a pair of axially facing facets	CPCONLY	Y10T408/9093		106
Y10T408/9095	10	with axially extending relief channel	CPCONLY	Y10T408/9095		266
Y10T408/9097	11	Spiral channel	CPCONLY	Y10T408/9097		714
Y10T408/9098	10	with means to retain Tool to support	CPCONLY	Y10T408/9098		284
Y10T408/90987	11	Wedge means	CPCONLY	Y10T408/90987		94
Y10T408/90993	11	Screw driven means	CPCONLY	Y10T408/90993		384
Y10T408/91	8	Machine frame	CPCONLY	Y10T408/91		638
Y10T408/92	9	with counterweight mechanism	CPCONLY	Y10T408/92		189
Y10T408/93	9	including pivotally mounted tool-carrier	CPCONLY	Y10T408/93		345
Y10T408/935	10	including laterally movable tool-carrier	CPCONLY	Y10T408/935		248
Y10T408/94	8	Tool-support	CPCONLY	Y10T408/94		280
Y10T408/95	9	with tool-retaining means	CPCONLY	Y10T408/95		869
Y10T408/953	10	Clamping jaws	CPCONLY	Y10T408/953		383
Y10T408/957	10	Tool adapter	CPCONLY	Y10T408/957		256
Y10T408/96	8	Miscellaneous	CPCONLY	Y10T408/96		522
Y10T408/97	9	Drill bushings	CPCONLY	Y10T408/97		99
Y10T408/98	9	Drill guide	CPCONLY	Y10T408/98		149
Y10T408/99	9	Adjustable stop	CPCONLY	Y10T408/99		139
Y10T409/00	7	Gear cutting, milling, or planing	CPCONLY	Y10T409/00		
Y10T409/10	8	Gear cutting	CPCONLY	Y10T409/10		67
Y10T409/100159	9	with regulation of operation by use of templet, card, or other replaceable information supply	CPCONLY	Y10T409/100159		83
Y10T409/100318	10	including follower for templet	CPCONLY	Y10T409/100318		58
Y10T409/100477	9	and burnishing simultaneously	CPCONLY	Y10T409/100477		9
Y10T409/100636	9	with compensation for backlash in drive means	CPCONLY	Y10T409/100636		34
Y10T409/100795	9	with work or product advancing	CPCONLY	Y10T409/100795		66
Y10T409/100954	10	Utilizing transfer arm	CPCONLY	Y10T409/100954		53
Y10T409/101113	9	Gear chamfering or deburring	CPCONLY	Y10T409/101113		120
Y10T409/101272	10	Using relatively reciprocating or oscillating cutter	CPCONLY	Y10T409/101272		61
Y10T409/101431	9	Gear tooth shape generating	CPCONLY	Y10T409/101431		80
Y10T409/10159	10	Hobbing	CPCONLY	Y10T409/10159		116
Y10T409/101749	11	Process	CPCONLY	Y10T409/101749		163
Y10T409/101908	12	Generating tooth for bevel gear	CPCONLY	Y10T409/101908		38
Y10T409/102067	11	including means to shift hob between cutting passes	CPCONLY	Y10T409/102067		31
Y10T409/102226	11	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T409/102226		67
Y10T409/102385	11	Plural hobs	CPCONLY	Y10T409/102385		30
Y10T409/102544	11	including infeed means	CPCONLY	Y10T409/102544		22
Y10T409/102703	12	to infeed along axis of work rotation	CPCONLY	Y10T409/102703		68
Y10T409/102862	13	Infeed of cutter	CPCONLY	Y10T409/102862		32
Y10T409/103021	14	and infeed radially of axis of work rotation	CPCONLY	Y10T409/103021		20
Y10T409/10318	14	Vertically	CPCONLY	Y10T409/10318		75
Y10T409/103339	12	to infeed radially of axis of work rotation	CPCONLY	Y10T409/103339		25
Y10T409/103498	13	Infeed of cutter	CPCONLY	Y10T409/103498		26
Y10T409/103657	14	and infeed tangentially of work axis	CPCONLY	Y10T409/103657		31
Y10T409/103816	10	Milling with radial faced tool	CPCONLY	Y10T409/103816		50
Y10T409/103975	11	Process	CPCONLY	Y10T409/103975		172
Y10T409/104134	11	Adapted to cut bevel gear	CPCONLY	Y10T409/104134		71
Y10T409/104293	12	with means to continuously rotate work and means to co-form all teeth of gear	CPCONLY	Y10T409/104293		24
Y10T409/104452	12	Bevel gear having nonparallel opposing tooth flanks	CPCONLY	Y10T409/104452		28
Y10T409/104611	12	including rotary cutter cradle	CPCONLY	Y10T409/104611		45
Y10T409/10477	10	by relative axial movement between synchronously indexing or rotating work and cutter	CPCONLY	Y10T409/10477		91
Y10T409/104929	11	Crowning	CPCONLY	Y10T409/104929		55
Y10T409/105088	11	Displacing cutter axially relative to work [e.g., gear shaving, etc.]	CPCONLY	Y10T409/105088		116
Y10T409/105247	12	Using gear shaper-cutter	CPCONLY	Y10T409/105247		124
Y10T409/105406	13	Plural distinct cutting edges	CPCONLY	Y10T409/105406		34
Y10T409/105565	13	Cutting rotating work, the axis of which lies in a plane intersecting the cutter axis	CPCONLY	Y10T409/105565		52
Y10T409/105724	10	Gear shaving	CPCONLY	Y10T409/105724		69
Y10T409/105883	10	Using rotary cutter	CPCONLY	Y10T409/105883		80
Y10T409/106042	11	having axially directed cutting edge	CPCONLY	Y10T409/106042		58
Y10T409/106201	11	Plural rotary cutters	CPCONLY	Y10T409/106201		52
Y10T409/10636	11	On reciprocating carriage	CPCONLY	Y10T409/10636		40
Y10T409/106519	10	Using reciprocating or oscillating cutter	CPCONLY	Y10T409/106519		11
Y10T409/106678	11	Bevel gear cutting	CPCONLY	Y10T409/106678		56
Y10T409/106837	12	Dual cutters	CPCONLY	Y10T409/106837		68
Y10T409/106996	12	Double acting cutter	CPCONLY	Y10T409/106996		7
Y10T409/107155	11	Rectilinearly reciprocating cutter	CPCONLY	Y10T409/107155		34
Y10T409/107314	12	Cutter comprising a rack	CPCONLY	Y10T409/107314		59
Y10T409/107473	10	Making a noncircular gear, worm, rotor, or a planar-faced gear	CPCONLY	Y10T409/107473		121
Y10T409/107632	9	Gear shaving	CPCONLY	Y10T409/107632		53
Y10T409/107791	9	Using rotary cutter	CPCONLY	Y10T409/107791		46
Y10T409/10795	10	Process	CPCONLY	Y10T409/10795		143
Y10T409/108109	10	End mill	CPCONLY	Y10T409/108109		22
Y10T409/108268	11	Radially faced	CPCONLY	Y10T409/108268		63
Y10T409/108427	12	Using plural, selectively usable tools	CPCONLY	Y10T409/108427		6
Y10T409/108586	10	Plural rotary cutters	CPCONLY	Y10T409/108586		75
Y10T409/108745	10	Cutting action along work axis	CPCONLY	Y10T409/108745		83
Y10T409/108904	11	Cutting action intersecting work axis	CPCONLY	Y10T409/108904		61
Y10T409/109063	9	Using reciprocating or oscillating cutter	CPCONLY	Y10T409/109063		68
Y10T409/109222	10	Broach	CPCONLY	Y10T409/109222		66
Y10T409/109381	10	including circumferentially disposed cutting edges	CPCONLY	Y10T409/109381		37
Y10T409/10954	9	Work dividing or checking of work position or division	CPCONLY	Y10T409/10954		100
Y10T409/109699	9	with work clamping	CPCONLY	Y10T409/109699		74
Y10T409/20	8	with furbishing of cutter	CPCONLY	Y10T409/20		24
Y10T409/30	8	Milling	CPCONLY	Y10T409/30		197
Y10T409/300056	9	Thread or helix generating	CPCONLY	Y10T409/300056		80
Y10T409/300112	10	Process	CPCONLY	Y10T409/300112		135
Y10T409/300168	10	with means to regulate operation by use of templet, card, or other replaceable information supply	CPCONLY	Y10T409/300168		45
Y10T409/300224	11	Complete cycle	CPCONLY	Y10T409/300224		35
Y10T409/30028	11	to regulate cutting depth [e.g., relief, taper, etc.]	CPCONLY	Y10T409/30028		63
Y10T409/300336	11	to regulate rate of motion [e.g., stopping, etc.]	CPCONLY	Y10T409/300336		35
Y10T409/300392	10	with nonthread or nonhelix generating, milling cutter	CPCONLY	Y10T409/300392		22
Y10T409/300448	10	with means to advance work or product	CPCONLY	Y10T409/300448		31
Y10T409/300504	10	Plural cutters or work holders	CPCONLY	Y10T409/300504		106
Y10T409/30056	10	with planetary cutter	CPCONLY	Y10T409/30056		105
Y10T409/300616	10	Work means to move work axially and means to interrelate work movement with cutter rotation	CPCONLY	Y10T409/300616		14
Y10T409/300672	10	with means to rotate work and means to interrelatedly infeed the work relative to the cutter	CPCONLY	Y10T409/300672		163
Y10T409/300728	11	Means to infeed the cutter	CPCONLY	Y10T409/300728		69
Y10T409/300784	10	with means to circumferentially adjust the position of the cutter with respect to the work	CPCONLY	Y10T409/300784		44
Y10T409/30084	9	with regulation of operation by templet, card, or other replaceable information supply	CPCONLY	Y10T409/30084		240
Y10T409/300896	10	with sensing of numerical information and regulation without mechanical connection between sensing means and regulated means [i.e., numerical control]	CPCONLY	Y10T409/300896		560
Y10T409/300952	10	to cut lock key	CPCONLY	Y10T409/300952		195
Y10T409/301008	11	Using templet other than a key	CPCONLY	Y10T409/301008		96
Y10T409/301064	11	Complete cycle	CPCONLY	Y10T409/301064		75
Y10T409/30112	10	Process	CPCONLY	Y10T409/30112		241
Y10T409/301176	10	Reproducing means	CPCONLY	Y10T409/301176		109
Y10T409/301232	11	including pantograph cutter-carrier	CPCONLY	Y10T409/301232		154
Y10T409/301288	12	and means to move work at work station	CPCONLY	Y10T409/301288		18
Y10T409/301344	13	About work axis	CPCONLY	Y10T409/301344		20
Y10T409/3014	12	Pivotally supported for vertical movement	CPCONLY	Y10T409/3014		61
Y10T409/301456	12	and means to counterbalance carrier	CPCONLY	Y10T409/301456		33
Y10T409/301512	12	including plural cutters	CPCONLY	Y10T409/301512		30
Y10T409/301568	11	by use of pivotally supported tracer	CPCONLY	Y10T409/301568		63
Y10T409/301624	11	Duplicating means	CPCONLY	Y10T409/301624		118
Y10T409/30168	12	with means for operation without manual intervention	CPCONLY	Y10T409/30168		105
Y10T409/301736	13	to make a double curvature foil	CPCONLY	Y10T409/301736		14
Y10T409/301792	13	including means to sense optical or magnetic image	CPCONLY	Y10T409/301792		82
Y10T409/301848	13	with means to support templet above or under work	CPCONLY	Y10T409/301848		45
Y10T409/301904	13	including tracer adapted to trigger electrical energy	CPCONLY	Y10T409/301904		34
Y10T409/30196	14	to actuate electrically driven work or tool moving means	CPCONLY	Y10T409/30196		72
Y10T409/302016	14	to actuate fluid driven work or tool moving means	CPCONLY	Y10T409/302016		19
Y10T409/302072	13	including tracer adapted to trigger fluid energy	CPCONLY	Y10T409/302072		16
Y10T409/302128	14	to actuate fluid driven work or tool moving means	CPCONLY	Y10T409/302128		56
Y10T409/302184	15	including cutter and tracer fixed to move laterally together	CPCONLY	Y10T409/302184		31
Y10T409/30224	13	and provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/30224		101
Y10T409/302296	14	including plural cutters	CPCONLY	Y10T409/302296		25
Y10T409/302352	13	including plural cutters	CPCONLY	Y10T409/302352		37
Y10T409/302408	13	including cross-slide tool carrier	CPCONLY	Y10T409/302408		53
Y10T409/302464	12	including plural cutters	CPCONLY	Y10T409/302464		91
Y10T409/30252	12	including cross-slide tool carrier	CPCONLY	Y10T409/30252		53
Y10T409/302576	12	with means to support templet above or under work	CPCONLY	Y10T409/302576		54
Y10T409/302632	12	with provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/302632		65
Y10T409/302688	11	with provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/302688		52
Y10T409/302744	12	and means for operation without manual intervention	CPCONLY	Y10T409/302744		77
Y10T409/3028	13	including tracer adapted to trigger electrical or fluid energy	CPCONLY	Y10T409/3028		18
Y10T409/302856	11	For using planar templet in cutting profile [e.g., contour map from planar map, etc.]	CPCONLY	Y10T409/302856		33
Y10T409/302912	11	including means for operation without manual intervention	CPCONLY	Y10T409/302912		41
Y10T409/302968	10	including means for operation without manual intervention	CPCONLY	Y10T409/302968		55
Y10T409/303024	11	including simultaneously usable plural tracers or including tracer adapted to simultaneously use plural templets	CPCONLY	Y10T409/303024		90
Y10T409/30308	12	to make a double curvature foil	CPCONLY	Y10T409/30308		32
Y10T409/303136	11	to make a double curvature foil	CPCONLY	Y10T409/303136		42
Y10T409/303192	11	including cutter and tracer fixed to move together	CPCONLY	Y10T409/303192		64
Y10T409/303248	11	with provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/303248		135
Y10T409/303304	10	and provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/303304		20
Y10T409/30336	10	including cutter and tracer fixed to move together	CPCONLY	Y10T409/30336		47
Y10T409/303416	9	Templet, tracer, or cutter	CPCONLY	Y10T409/303416		82
Y10T409/303472	10	Tracer	CPCONLY	Y10T409/303472		84
Y10T409/303528	11	Adapted to trigger electrical energy	CPCONLY	Y10T409/303528		113
Y10T409/303584	12	Photocell	CPCONLY	Y10T409/303584		52
Y10T409/30364	11	Adapted to trigger fluid energy	CPCONLY	Y10T409/30364		101
Y10T409/303696	10	Templet	CPCONLY	Y10T409/303696		179
Y10T409/303752	9	Process	CPCONLY	Y10T409/303752		750
Y10T409/303808	10	including infeeding	CPCONLY	Y10T409/303808		830
Y10T409/303864	9	with means to weigh or test work or product	CPCONLY	Y10T409/303864		83
Y10T409/30392	9	with means to protect operative or machine [e.g., guard, safety device, etc.]	CPCONLY	Y10T409/30392		484
Y10T409/303976	9	with means to control temperature or lubricate	CPCONLY	Y10T409/303976		272
Y10T409/304032	10	Cutter or work	CPCONLY	Y10T409/304032		438
Y10T409/304088	9	with means to remove chip	CPCONLY	Y10T409/304088		559
Y10T409/304144	9	Means to trim edge	CPCONLY	Y10T409/304144		297
Y10T409/3042	9	Means to remove scale or raised surface imperfection	CPCONLY	Y10T409/3042		116
Y10T409/304256	10	Means to remove flash or burr	CPCONLY	Y10T409/304256		171
Y10T409/304312	9	with means to dampen vibration	CPCONLY	Y10T409/304312		248
Y10T409/304368	9	Means to mill epitrochoidal shape	CPCONLY	Y10T409/304368		21
Y10T409/304424	9	Means for internal milling	CPCONLY	Y10T409/304424		299
Y10T409/30448	9	with detachable or auxiliary cutter support to convert cutting action	CPCONLY	Y10T409/30448		216
Y10T409/304536	9	including means to infeed work to cutter	CPCONLY	Y10T409/304536		210
Y10T409/304592	10	with compensation for backlash in drive means	CPCONLY	Y10T409/304592		111
Y10T409/304648	10	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T409/304648		72
Y10T409/304704	11	In response to cutter or cutter carriage	CPCONLY	Y10T409/304704		28
Y10T409/30476	11	In response to work or work carriage	CPCONLY	Y10T409/30476		29
Y10T409/304816	12	to control rate of infeed or return	CPCONLY	Y10T409/304816		21
Y10T409/304872	12	to control limit of infeed	CPCONLY	Y10T409/304872		57
Y10T409/304928	13	Adapted to hydraulically or pneumatically stimulate control	CPCONLY	Y10T409/304928		40
Y10T409/304984	13	Adapted to electrically stimulate control	CPCONLY	Y10T409/304984		30
Y10T409/30504	11	to control rate of infeed or return	CPCONLY	Y10T409/30504		27
Y10T409/305096	11	to effect stopping of infeed	CPCONLY	Y10T409/305096		33
Y10T409/305152	10	with means to change rate of infeed	CPCONLY	Y10T409/305152		131
Y10T409/305208	10	Means to mill indeterminate length work	CPCONLY	Y10T409/305208		62
Y10T409/305264	10	Multiple work stations	CPCONLY	Y10T409/305264		121
Y10T409/30532	10	with means to advance work or product	CPCONLY	Y10T409/30532		130
Y10T409/305376	11	Vertically	CPCONLY	Y10T409/305376		104
Y10T409/305432	11	Endless or orbital work or product advancing means	CPCONLY	Y10T409/305432		132
Y10T409/305488	10	to reciprocate or oscillate work	CPCONLY	Y10T409/305488		69
Y10T409/305544	10	with work holder	CPCONLY	Y10T409/305544		197
Y10T409/3056	11	and means to selectively position work	CPCONLY	Y10T409/3056		116
Y10T409/305656	11	including means to support work for rotation during operation	CPCONLY	Y10T409/305656		461
Y10T409/305712	12	and including means to infeed cutter toward work axis	CPCONLY	Y10T409/305712		68
Y10T409/305768	12	with linear movement of work	CPCONLY	Y10T409/305768		180
Y10T409/305824	12	with angular movement of work	CPCONLY	Y10T409/305824		193
Y10T409/30588	10	including friction gearing drive	CPCONLY	Y10T409/30588		80
Y10T409/305936	10	including fluid drive	CPCONLY	Y10T409/305936		136
Y10T409/305992	9	with means to effect stopping upon completion of operation	CPCONLY	Y10T409/305992		30
Y10T409/306048	9	with means to advance work or product	CPCONLY	Y10T409/306048		70
Y10T409/306104	10	Endless or orbital work or product advancing means	CPCONLY	Y10T409/306104		64
Y10T409/30616	9	with means to precisely reposition work	CPCONLY	Y10T409/30616		44
Y10T409/306216	9	Randomly manipulated, work supported, or work following device	CPCONLY	Y10T409/306216		203
Y10T409/306272	10	For machining commutator	CPCONLY	Y10T409/306272		21
Y10T409/306328	10	For cutting longitudinal groove in shaft [e.g., keyway, etc.]	CPCONLY	Y10T409/306328		42
Y10T409/306384	10	with work supported guide means	CPCONLY	Y10T409/306384		343
Y10T409/30644	11	to guide tool to move in arcuate path	CPCONLY	Y10T409/30644		146
Y10T409/306496	10	with work follower	CPCONLY	Y10T409/306496		146
Y10T409/306552	10	Randomly manipulated	CPCONLY	Y10T409/306552		88
Y10T409/306608	11	End mill [e.g., router, etc.]	CPCONLY	Y10T409/306608		464
Y10T409/306664	9	including means to infeed rotary cutter toward work	CPCONLY	Y10T409/306664		197
Y10T409/30672	10	with means to limit penetration into work	CPCONLY	Y10T409/30672		102
Y10T409/306776	10	Axially	CPCONLY	Y10T409/306776		194
Y10T409/306832	11	with infeed control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T409/306832		76
Y10T409/306888	12	In response to cutter condition	CPCONLY	Y10T409/306888		43
Y10T409/306944	12	In response to work condition	CPCONLY	Y10T409/306944		32
Y10T409/307	11	with work holder	CPCONLY	Y10T409/307		88
Y10T409/307056	11	and laterally	CPCONLY	Y10T409/307056		157
Y10T409/307112	12	Simultaneously	CPCONLY	Y10T409/307112		115
Y10T409/307168	11	Plural cutters	CPCONLY	Y10T409/307168		184
Y10T409/307224	10	with infeed control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T409/307224		105
Y10T409/30728	11	In response to cutter condition	CPCONLY	Y10T409/30728		52
Y10T409/307336	11	In response to work condition	CPCONLY	Y10T409/307336		37
Y10T409/307392	10	with means to change rate of infeed	CPCONLY	Y10T409/307392		27
Y10T409/307448	10	with work holder	CPCONLY	Y10T409/307448		205
Y10T409/307504	11	Indexable	CPCONLY	Y10T409/307504		111
Y10T409/30756	10	Machining arcuate surface	CPCONLY	Y10T409/30756		272
Y10T409/307616	11	with means to move cutter eccentrically	CPCONLY	Y10T409/307616		158
Y10T409/307672	10	Angularly adjustable cutter head	CPCONLY	Y10T409/307672		385
Y10T409/307728	10	including gantry-type cutter-carrier	CPCONLY	Y10T409/307728		161
Y10T409/307784	10	Plural cutters	CPCONLY	Y10T409/307784		247
Y10T409/30784	9	including means to adustably position cutter	CPCONLY	Y10T409/30784		118
Y10T409/307896	10	with work holder or guide	CPCONLY	Y10T409/307896		107
Y10T409/307952	10	Linear adjustment	CPCONLY	Y10T409/307952		174
Y10T409/308008	11	with control for adjustment means responsive to activator stimulated by condition sensor	CPCONLY	Y10T409/308008		32
Y10T409/308064	12	Responsive to position of cutter	CPCONLY	Y10T409/308064		45
Y10T409/30812	12	and means to clamp cutter support in adjusted position	CPCONLY	Y10T409/30812		32
Y10T409/308176	11	with position indicator or limit means	CPCONLY	Y10T409/308176		112
Y10T409/308232	11	and angular adjustment	CPCONLY	Y10T409/308232		245
Y10T409/308288	11	including gantry-type cutter-carrier	CPCONLY	Y10T409/308288		227
Y10T409/308344	11	Plural cutters	CPCONLY	Y10T409/308344		164
Y10T409/3084	10	with position indicator or limit means	CPCONLY	Y10T409/3084		56
Y10T409/308456	10	with right angle cutter drive	CPCONLY	Y10T409/308456		130
Y10T409/308512	10	Compound angular adjustment	CPCONLY	Y10T409/308512		179
Y10T409/308568	10	Plural cutters	CPCONLY	Y10T409/308568		69
Y10T409/308624	9	with limit means to aid in positioning of cutter bit or work [e.g., gauge, stop, etc.]	CPCONLY	Y10T409/308624		348
Y10T409/30868	9	Work support	CPCONLY	Y10T409/30868		403
Y10T409/308736	10	with position indicator or stop	CPCONLY	Y10T409/308736		100
Y10T409/308792	10	Indexable	CPCONLY	Y10T409/308792		341
Y10T409/308848	11	including dividing head	CPCONLY	Y10T409/308848		107
Y10T409/308904	12	Multiple row dividing head	CPCONLY	Y10T409/308904		39
Y10T409/30896	10	with angular adjustment	CPCONLY	Y10T409/30896		124
Y10T409/309016	10	with work holder or guide	CPCONLY	Y10T409/309016		343
Y10T409/309072	11	including cutter limited to rotary motion	CPCONLY	Y10T409/309072		162
Y10T409/309128	10	with means to adjust work support vertically	CPCONLY	Y10T409/309128		103
Y10T409/309184	9	including cutter limited to rotary motion	CPCONLY	Y10T409/309184		200
Y10T409/30924	10	Cutter turning about vertical axis	CPCONLY	Y10T409/30924		94
Y10T409/309296	9	Detachable or repositionable tool head	CPCONLY	Y10T409/309296		216
Y10T409/309352	9	Cutter spindle or spindle support	CPCONLY	Y10T409/309352		498
Y10T409/309408	10	with cutter holder	CPCONLY	Y10T409/309408		401
Y10T409/309464	11	and draw bar	CPCONLY	Y10T409/309464		507
Y10T409/30952	9	with cutter holder	CPCONLY	Y10T409/30952		665
Y10T409/309576	9	Machine frame	CPCONLY	Y10T409/309576		536
Y10T409/309632	10	Overarm harness structure	CPCONLY	Y10T409/309632		110
Y10T409/309688	10	including counterbalancing means	CPCONLY	Y10T409/309688		123
Y10T409/309744	10	including means to compensate for deformation	CPCONLY	Y10T409/309744		72
Y10T409/3098	11	Deflection of cutter spindle	CPCONLY	Y10T409/3098		50
Y10T409/309856	10	Convertible from lathe	CPCONLY	Y10T409/309856		161
Y10T409/309912	10	including relatively movable components and means to relatively immobilize these components	CPCONLY	Y10T409/309912		257
Y10T409/309968	9	Tailstock	CPCONLY	Y10T409/309968		25
Y10T409/40	8	Broaching	CPCONLY	Y10T409/40		22
Y10T409/400175	9	Process	CPCONLY	Y10T409/400175		104
Y10T409/40035	9	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T409/40035		21
Y10T409/400525	10	Responsive to condition of work or product	CPCONLY	Y10T409/400525		17
Y10T409/4007	9	with means to distribute cutter infeed force	CPCONLY	Y10T409/4007		14
Y10T409/400875	9	with means to select cutter or to select or modify cutter drive	CPCONLY	Y10T409/400875		25
Y10T409/40105	9	with means to clean, lubricate, or modify temperature of work or cutter	CPCONLY	Y10T409/40105		48
Y10T409/401225	9	with product handling means	CPCONLY	Y10T409/401225		23
Y10T409/4014	10	Between plural broaching stations	CPCONLY	Y10T409/4014		17
Y10T409/401575	10	Means to eject broached product	CPCONLY	Y10T409/401575		44
Y10T409/40175	10	Chip removal means	CPCONLY	Y10T409/40175		24
Y10T409/401925	9	with means to protect operative or machine [e.g., guard, safety device, etc.]	CPCONLY	Y10T409/401925		12
Y10T409/4021	10	with safety means for overload or safety interlock	CPCONLY	Y10T409/4021		28
Y10T409/402275	9	with work immobilizer and means to activate work immobilizer interrelated with cutter infeed, work infeed, or work advance	CPCONLY	Y10T409/402275		19
Y10T409/40245	9	with work infeed or advancing means and means to clamp the work thereto, which clamping means is interrelated with work or cutter infeed	CPCONLY	Y10T409/40245		16
Y10T409/402625	9	Means to remove flash or burr	CPCONLY	Y10T409/402625		22
Y10T409/4028	9	Means for cutting groove	CPCONLY	Y10T409/4028		59
Y10T409/402975	10	Arcuate groove in cylindrical surface	CPCONLY	Y10T409/402975		23
Y10T409/40315	11	Rifling	CPCONLY	Y10T409/40315		21
Y10T409/403325	9	Orbital carrier for cutter	CPCONLY	Y10T409/403325		33
Y10T409/4035	9	Orbital carrier for work	CPCONLY	Y10T409/4035		31
Y10T409/403675	9	with means to cyclically manipulate cutter or cutter support	CPCONLY	Y10T409/403675		26
Y10T409/40385	10	to reorient, introduce, or remove cutter	CPCONLY	Y10T409/40385		27
Y10T409/404025	10	Cutter released to interim support at termination of cutting stroke	CPCONLY	Y10T409/404025		12
Y10T409/4042	10	to remove and return cutter to cutter support	CPCONLY	Y10T409/4042		16
Y10T409/404375	9	with plural cutters	CPCONLY	Y10T409/404375		98
Y10T409/40455	9	with means to advance, infeed, or manipulate work	CPCONLY	Y10T409/40455		42
Y10T409/404725	10	Interrelated with cutter infeed	CPCONLY	Y10T409/404725		40
Y10T409/4049	11	including means supporting work and additional means opposing infeed force	CPCONLY	Y10T409/4049		16
Y10T409/405075	11	including work indexing means for sequential cutting of different surfaces of a single workpiece	CPCONLY	Y10T409/405075		23
Y10T409/40525	11	including work indexing means for sequential cutting of surfaces of different workpieces	CPCONLY	Y10T409/40525		22
Y10T409/405425	11	with means to retract work from path of tool&apos;s idle return stroke	CPCONLY	Y10T409/405425		17
Y10T409/4056	10	to infeed work past cutter	CPCONLY	Y10T409/4056		40
Y10T409/405775	9	with means to hold work during cutting	CPCONLY	Y10T409/405775		29
Y10T409/40595	10	including work clamping means	CPCONLY	Y10T409/40595		69
Y10T409/406125	10	with means to adjust or facilitate adjustment of work or work holder	CPCONLY	Y10T409/406125		18
Y10T409/4063	10	with means on work or work holder to guide cutter during infeed	CPCONLY	Y10T409/4063		25
Y10T409/406475	9	Cutter infeed means	CPCONLY	Y10T409/406475		13
Y10T409/40665	10	Imparting rectilinear motion to cutter	CPCONLY	Y10T409/40665		28
Y10T409/406825	11	and rotary motion to cutter	CPCONLY	Y10T409/406825		20
Y10T409/407	11	Fluid powered means	CPCONLY	Y10T409/407		45
Y10T409/407175	11	Rack means	CPCONLY	Y10T409/407175		9
Y10T409/40735	11	Screw means	CPCONLY	Y10T409/40735		27
Y10T409/407525	9	Machine frame	CPCONLY	Y10T409/407525		12
Y10T409/4077	9	Cutter support or guide	CPCONLY	Y10T409/4077		72
Y10T409/50	8	Planing	CPCONLY	Y10T409/50		72
Y10T409/500164	9	with regulation of operation by templet, card, or other replaceable information supply	CPCONLY	Y10T409/500164		124
Y10T409/500328	10	including use of tracer adapted to trigger electrical or fluid energy	CPCONLY	Y10T409/500328		43
Y10T409/500492	11	including provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/500492		30
Y10T409/500656	10	including provision for circumferential relative movement of cutter and work	CPCONLY	Y10T409/500656		24
Y10T409/50082	9	Process	CPCONLY	Y10T409/50082		157
Y10T409/500984	9	with means to lubricate	CPCONLY	Y10T409/500984		11
Y10T409/501148	9	with product handling means	CPCONLY	Y10T409/501148		22
Y10T409/501312	9	Randomly manipulated, work supported, or work following device	CPCONLY	Y10T409/501312		46
Y10T409/501476	9	Means to remove flash or burr	CPCONLY	Y10T409/501476		89
Y10T409/50164	10	Elongated work	CPCONLY	Y10T409/50164		105
Y10T409/501804	11	Flash or burr inside hollow work	CPCONLY	Y10T409/501804		109
Y10T409/501968	11	Transverse burr	CPCONLY	Y10T409/501968		68
Y10T409/502132	10	Flat work	CPCONLY	Y10T409/502132		50
Y10T409/502296	9	of commutator	CPCONLY	Y10T409/502296		12
Y10T409/50246	9	Means for trimming edge [e.g., chamfering, scarfing, etc.]	CPCONLY	Y10T409/50246		103
Y10T409/502624	9	Means for cutting groove	CPCONLY	Y10T409/502624		166
Y10T409/502788	10	Arcuate groove	CPCONLY	Y10T409/502788		66
Y10T409/502952	11	For rifling	CPCONLY	Y10T409/502952		75
Y10T409/503116	10	Inside hollow work	CPCONLY	Y10T409/503116		85
Y10T409/50328	9	Means for shaving by blade spanning work surface	CPCONLY	Y10T409/50328		65
Y10T409/503444	10	Concave work surface [e.g., bearing, stereotype printing plate, etc,]	CPCONLY	Y10T409/503444		34
Y10T409/503608	10	Circumferential surface	CPCONLY	Y10T409/503608		31
Y10T409/503772	10	including rack driven infeed means	CPCONLY	Y10T409/503772		18
Y10T409/503936	10	including roller infeed means	CPCONLY	Y10T409/503936		4
Y10T409/5041	9	Means for cutting arcuate surface	CPCONLY	Y10T409/5041		75
Y10T409/504264	10	Cycloidal surface	CPCONLY	Y10T409/504264		12
Y10T409/504428	10	with work infeed and means to arcuately reposition the cutter	CPCONLY	Y10T409/504428		35
Y10T409/504592	10	with work infeed and means to arcuately reposition the work	CPCONLY	Y10T409/504592		25
Y10T409/504756	9	with means to relatively infeed cutter and work	CPCONLY	Y10T409/504756		30
Y10T409/50492	10	and means to rotate work and cutter at same rate about converging axes	CPCONLY	Y10T409/50492		2
Y10T409/505084	10	with plural sequentially acting cutters or with double acting cutter	CPCONLY	Y10T409/505084		59
Y10T409/505248	10	and means to vary rate of infeed	CPCONLY	Y10T409/505248		24
Y10T409/505412	10	Reciprocating work infeed means	CPCONLY	Y10T409/505412		53
Y10T409/505576	11	with fluid-driven bed	CPCONLY	Y10T409/505576		18
Y10T409/50574	11	with rack-driven bed	CPCONLY	Y10T409/50574		62
Y10T409/505904	11	with screw-driven bed	CPCONLY	Y10T409/505904		12
Y10T409/506068	11	and means to permit repositioning of cutter laterally	CPCONLY	Y10T409/506068		17
Y10T409/506232	10	Reciprocating cutter infeed means	CPCONLY	Y10T409/506232		71
Y10T409/506396	11	Reciprocating cutter horizontally	CPCONLY	Y10T409/506396		95
Y10T409/50656	12	with work support and lead screw to reposition work support	CPCONLY	Y10T409/50656		21
Y10T409/506724	12	with fluid-powered means to drive cutter	CPCONLY	Y10T409/506724		28
Y10T409/506888	12	with pivoting link to drive cutter	CPCONLY	Y10T409/506888		62
Y10T409/507052	13	Link driven by crank	CPCONLY	Y10T409/507052		47
Y10T409/507216	12	with rack to drive cutter	CPCONLY	Y10T409/507216		45
Y10T409/50738	12	with screw to drive cutter	CPCONLY	Y10T409/50738		41
Y10T409/507544	11	with link or cam to drive cutter	CPCONLY	Y10T409/507544		78
Y10T409/507708	11	with rack to drive cutter	CPCONLY	Y10T409/507708		42
Y10T409/507872	10	including means causing return stroke	CPCONLY	Y10T409/507872		80
Y10T409/508036	9	Machine frame	CPCONLY	Y10T409/508036		62
Y10T409/5082	10	Means to permit repositioning of cutter	CPCONLY	Y10T409/5082		6
Y10T409/508364	11	Laterally	CPCONLY	Y10T409/508364		94
Y10T409/508528	12	Plural independently positioned cutters	CPCONLY	Y10T409/508528		33
Y10T409/508692	12	including clutch	CPCONLY	Y10T409/508692		34
Y10T409/508856	12	including repositioning means and means to effect stopping thereof	CPCONLY	Y10T409/508856		16
Y10T409/50902	10	including relatively movable components and means to relatively immobilize these components	CPCONLY	Y10T409/50902		26
Y10T409/509184	10	Work table	CPCONLY	Y10T409/509184		24
Y10T409/509348	9	Tool head	CPCONLY	Y10T409/509348		117
Y10T409/509512	10	with selectively usable cutting edges	CPCONLY	Y10T409/509512		82
Y10T409/509676	10	with means to permit repositioning of cutting for idle return stroke	CPCONLY	Y10T409/509676		30
Y10T409/50984	11	comprising pivotable cutter or cutter support	CPCONLY	Y10T409/50984		92
Y10T428/00	7	Stock material or miscellaneous articles	CPCONLY	Y10T428/00		1
Y10T428/11	8	Magnetic recording head	CPCONLY	Y10T428/11		168
Y10T428/1107	9	Magnetoresistive	CPCONLY	Y10T428/1107		115
Y10T428/1114	10	having tunnel junction effect	CPCONLY	Y10T428/1114		139
Y10T428/1121	10	Multilayer	CPCONLY	Y10T428/1121		288
Y10T428/1129	11	Super lattice [e.g., giant magneto resistance [GMR] or colossal magneto resistance [CMR], etc.]	CPCONLY	Y10T428/1129		84
Y10T428/1136	10	Single film	CPCONLY	Y10T428/1136		18
Y10T428/1143	10	with defined structural feature	CPCONLY	Y10T428/1143		119
Y10T428/115	9	Magnetic layer composition	CPCONLY	Y10T428/115		219
Y10T428/1157	9	Substrate composition	CPCONLY	Y10T428/1157		65
Y10T428/1164	9	with protective film	CPCONLY	Y10T428/1164		74
Y10T428/1171	9	with defined laminate structural detail	CPCONLY	Y10T428/1171		172
Y10T428/1179	10	Head with slider structure	CPCONLY	Y10T428/1179		18
Y10T428/1186	10	with head pole component	CPCONLY	Y10T428/1186		58
Y10T428/1193	9	with interlaminar component [e.g., adhesion layer, etc.]	CPCONLY	Y10T428/1193		126
Y10T428/12	8	All metal or with adjacent metals	CPCONLY	Y10T428/12		531
Y10T428/12007	9	Component of composite having metal continuous phase interengaged with nonmetal continuous phase	CPCONLY	Y10T428/12007		353
Y10T428/12014	9	having metal particles	CPCONLY	Y10T428/12014		611
Y10T428/12021	10	having composition or density gradient or differential porosity	CPCONLY	Y10T428/12021		343
Y10T428/12028	10	Composite; i.e., plural, adjacent, spatially distinct metal components [e.g., layers, etc.]	CPCONLY	Y10T428/12028		567
Y10T428/12035	11	Fiber, asbestos, or cellulose in or next to particulate component	CPCONLY	Y10T428/12035		165
Y10T428/12042	11	Porous component	CPCONLY	Y10T428/12042		363
Y10T428/12049	11	Nonmetal component	CPCONLY	Y10T428/12049		390
Y10T428/12056	12	Entirely inorganic	CPCONLY	Y10T428/12056		520
Y10T428/12063	11	Nonparticulate metal component	CPCONLY	Y10T428/12063		767
Y10T428/12069	12	Plural nonparticulate metal components	CPCONLY	Y10T428/12069		198
Y10T428/12076	13	Next to each other	CPCONLY	Y10T428/12076		154
Y10T428/12083	14	Nonmetal in particulate component	CPCONLY	Y10T428/12083		113
Y10T428/1209	12	Plural particulate metal components	CPCONLY	Y10T428/1209		212
Y10T428/12097	12	Nonparticulate component encloses particles	CPCONLY	Y10T428/12097		313
Y10T428/12104	12	Particles discontinuous	CPCONLY	Y10T428/12104		124
Y10T428/12111	13	Separated by nonmetal matrix or binder [e.g., welding electrode, etc.]	CPCONLY	Y10T428/12111		219
Y10T428/12118	14	Nonparticulate component has Ni-, Cu-, or Zn-base	CPCONLY	Y10T428/12118		87
Y10T428/12125	14	Nonparticulate component has Fe-base	CPCONLY	Y10T428/12125		85
Y10T428/12132	15	Next to Fe-containing particles	CPCONLY	Y10T428/12132		69
Y10T428/12139	12	Nonmetal particles in particulate component	CPCONLY	Y10T428/12139		450
Y10T428/12146	11	Nonmetal particles in a component	CPCONLY	Y10T428/12146		257
Y10T428/12153	10	Interconnected void structure [e.g., permeable, etc.]	CPCONLY	Y10T428/12153		247
Y10T428/1216	10	Continuous interengaged phases of plural metals, or oriented fiber containing	CPCONLY	Y10T428/1216		326
Y10T428/12167	11	Nonmetal containing	CPCONLY	Y10T428/12167		106
Y10T428/12174	11	Mo or W containing	CPCONLY	Y10T428/12174		113
Y10T428/12181	9	Composite powder [e.g., coated, etc.]	CPCONLY	Y10T428/12181		556
Y10T428/12188	9	having marginal feature for indexing or weakened portion for severing	CPCONLY	Y10T428/12188		146
Y10T428/12194	10	For severing perpendicular to longitudinal dimension	CPCONLY	Y10T428/12194		115
Y10T428/12201	9	Width or thickness variation or marginal cuts repeating longitudinally	CPCONLY	Y10T428/12201		284
Y10T428/12208	10	Variation in both width and thickness	CPCONLY	Y10T428/12208		95
Y10T428/12215	10	Marginal slots [i.e., deeper than wide]	CPCONLY	Y10T428/12215		58
Y10T428/12222	9	Shaped configuration for melting [e.g., package, etc.]	CPCONLY	Y10T428/12222		234
Y10T428/12229	9	Intermediate article [e.g., blank, etc.]	CPCONLY	Y10T428/12229		379
Y10T428/12236	10	Panel having nonrectangular perimeter	CPCONLY	Y10T428/12236		122
Y10T428/12243	11	Disk	CPCONLY	Y10T428/12243		236
Y10T428/1225	11	Symmetrical	CPCONLY	Y10T428/1225		104
Y10T428/12257	12	Only one plane of symmetry	CPCONLY	Y10T428/12257		94
Y10T428/12264	10	having outward flange, gripping means or interlocking feature	CPCONLY	Y10T428/12264		464
Y10T428/12271	10	having discrete fastener, marginal fastening, taper, or end structure	CPCONLY	Y10T428/12271		236
Y10T428/12278	11	Same structure at both ends of plural taper	CPCONLY	Y10T428/12278		118
Y10T428/12285	11	Single taper [e.g., ingot, etc.]	CPCONLY	Y10T428/12285		130
Y10T428/12292	9	Workpiece with longitudinal passageway or stopweld material [e.g., for tubular stock, etc.]	CPCONLY	Y10T428/12292		407
Y10T428/12299	9	Workpiece mimicking finished stock having nonrectangular or noncircular cross section	CPCONLY	Y10T428/12299		81
Y10T428/12306	9	Workpiece of parallel, nonfastened components [e.g., fagot, pile, etc.]	CPCONLY	Y10T428/12306		77
Y10T428/12313	10	Arranged to avoid lateral displacement	CPCONLY	Y10T428/12313		68
Y10T428/12319	10	Composite	CPCONLY	Y10T428/12319		66
Y10T428/12326	9	with provision for limited relative movement between components	CPCONLY	Y10T428/12326		130
Y10T428/12333	9	Helical or with helical component	CPCONLY	Y10T428/12333		463
Y10T428/1234	9	Honeycomb, or with grain orientation or elongated elements in defined angular relationship in respective components [e.g., parallel, inter- secting, etc.]	CPCONLY	Y10T428/1234		591
Y10T428/12347	9	Plural layers discontinuously bonded [e.g., spot-weld, mechanical fastener, etc.]	CPCONLY	Y10T428/12347		616
Y10T428/12354	9	Nonplanar, uniform-thickness material having symmetrical channel shape or reverse fold [e.g., making acute angle, etc.]	CPCONLY	Y10T428/12354		430
Y10T428/12361	9	having aperture or cut	CPCONLY	Y10T428/12361		944
Y10T428/12368	10	Struck-out portion type	CPCONLY	Y10T428/12368		181
Y10T428/12375	9	having member which crosses the plane of another member [e.g., T or X cross section, etc.]	CPCONLY	Y10T428/12375		313
Y10T428/12382	9	Defined configuration of both thickness and nonthickness surface or angle therebetween [e.g., rounded corners, etc.]	CPCONLY	Y10T428/12382		232
Y10T428/12389	9	having variation in thickness	CPCONLY	Y10T428/12389		741
Y10T428/12396	10	Discontinuous surface component	CPCONLY	Y10T428/12396		396
Y10T428/12403	10	Longitudinally smooth and symmetrical	CPCONLY	Y10T428/12403		167
Y10T428/1241	9	Nonplanar uniform thickness or nonlinear uniform diameter [e.g., L-shape]	CPCONLY	Y10T428/1241		510
Y10T428/12417	10	Intersecting corrugating or dimples not in a single line [e.g., waffle form, etc.]	CPCONLY	Y10T428/12417		172
Y10T428/12424	9	Mass of only fibers	CPCONLY	Y10T428/12424		216
Y10T428/12431	9	Foil or filament smaller than 6 mils	CPCONLY	Y10T428/12431		627
Y10T428/12438	10	Composite	CPCONLY	Y10T428/12438		519
Y10T428/12444	9	Embodying fibers interengaged or between layers [e.g., paper, etc.]	CPCONLY	Y10T428/12444		434
Y10T428/12451	9	Macroscopically anomalous interface between layers	CPCONLY	Y10T428/12451		391
Y10T428/12458	9	having composition, density, or hardness gradient	CPCONLY	Y10T428/12458		701
Y10T428/12465	9	having magnetic properties, or preformed fiber orientation coordinate with shape	CPCONLY	Y10T428/12465		843
Y10T428/12472	9	Microscopic interfacial wave or roughness	CPCONLY	Y10T428/12472		418
Y10T428/12479	9	Porous [e.g., foamed, spongy, cracked, etc.]	CPCONLY	Y10T428/12479		694
Y10T428/12486	9	Laterally noncoextensive components [e.g., embedded, etc.]	CPCONLY	Y10T428/12486		1264
Y10T428/12493	9	Composite; i.e., plural, adjacent, spatially distinct metal components [e.g., layers, joint, etc.]	CPCONLY	Y10T428/12493		1122
Y10T428/125	10	Deflectable by temperature change [e.g., thermostat element]	CPCONLY	Y10T428/125		145
Y10T428/12507	11	More than two components	CPCONLY	Y10T428/12507		125
Y10T428/12514	11	One component Cu-based	CPCONLY	Y10T428/12514		107
Y10T428/12521	11	Both components Fe-based with more than 10% Ni	CPCONLY	Y10T428/12521		47
Y10T428/12528	10	Semiconductor component	CPCONLY	Y10T428/12528		732
Y10T428/12535	10	with additional, spatially distinct nonmetal component	CPCONLY	Y10T428/12535		805
Y10T428/12542	11	More than one such component	CPCONLY	Y10T428/12542		260
Y10T428/12549	12	Adjacent to each other	CPCONLY	Y10T428/12549		607
Y10T428/12556	11	Organic component	CPCONLY	Y10T428/12556		419
Y10T428/12562	12	Elastomer	CPCONLY	Y10T428/12562		207
Y10T428/12569	12	Synthetic resin	CPCONLY	Y10T428/12569		1209
Y10T428/12576	11	Boride, carbide or nitride component	CPCONLY	Y10T428/12576		864
Y10T428/12583	11	Component contains compound of adjacent metal	CPCONLY	Y10T428/12583		269
Y10T428/1259	12	Oxide	CPCONLY	Y10T428/1259		585
Y10T428/12597	11	Noncrystalline silica or noncrystalline plural-oxide component [e.g., glass, etc.]	CPCONLY	Y10T428/12597		405
Y10T428/12604	12	Film [e.g., glaze, etc.]	CPCONLY	Y10T428/12604		136
Y10T428/12611	11	Oxide-containing component	CPCONLY	Y10T428/12611		1425
Y10T428/12618	12	Plural oxides	CPCONLY	Y10T428/12618		723
Y10T428/12625	11	Free carbon containing component	CPCONLY	Y10T428/12625		300
Y10T428/12632	10	Four or more distinct components with alternate recurrence of each type component	CPCONLY	Y10T428/12632		295
Y10T428/12639	10	Adjacent, identical composition, components	CPCONLY	Y10T428/12639		328
Y10T428/12646	11	Group VIII or IB metal-base	CPCONLY	Y10T428/12646		314
Y10T428/12653	12	Fe, containing 0.01-1.7% carbon [i.e., steel]	CPCONLY	Y10T428/12653		187
Y10T428/1266	10	O, S, or organic compound in metal component	CPCONLY	Y10T428/1266		323
Y10T428/12667	11	Oxide of transition metal or Al	CPCONLY	Y10T428/12667		271
Y10T428/12674	10	Ge- or Si-base component	CPCONLY	Y10T428/12674		442
Y10T428/12681	10	Ga-, In-, Tl- or Group VA metal-base component	CPCONLY	Y10T428/12681		318
Y10T428/12687	10	Pb- and Sn-base components: alternative to or next to each other	CPCONLY	Y10T428/12687		133
Y10T428/12694	11	and next to Cu- or Fe-base component	CPCONLY	Y10T428/12694		118
Y10T428/12701	10	Pb-base component	CPCONLY	Y10T428/12701		292
Y10T428/12708	10	Sn-base component	CPCONLY	Y10T428/12708		430
Y10T428/12715	11	Next to Group IB metal-base component	CPCONLY	Y10T428/12715		403
Y10T428/12722	11	Next to Group VIII metal-base component	CPCONLY	Y10T428/12722		437
Y10T428/12729	10	Group IIA metal-base component	CPCONLY	Y10T428/12729		336
Y10T428/12736	10	Al-base component	CPCONLY	Y10T428/12736		938
Y10T428/12743	11	Next to refractory [Group IVB, VB, or VIB] metal-base component	CPCONLY	Y10T428/12743		441
Y10T428/1275	11	Next to Group VIII or IB metal-base component	CPCONLY	Y10T428/1275		754
Y10T428/12757	12	Fe	CPCONLY	Y10T428/12757		966
Y10T428/12764	11	Next to Al-base component	CPCONLY	Y10T428/12764		794
Y10T428/12771	10	Transition metal-base component	CPCONLY	Y10T428/12771		374
Y10T428/12778	11	Alternative base metals from diverse categories	CPCONLY	Y10T428/12778		580
Y10T428/12785	11	Group IIB metal-base component	CPCONLY	Y10T428/12785		173
Y10T428/12792	12	Zn-base component	CPCONLY	Y10T428/12792		565
Y10T428/12799	13	Next to Fe-base component [e.g., galvanized]	CPCONLY	Y10T428/12799		1079
Y10T428/12806	11	Refractory [Group IVB, VB, or VIB] metal-base component	CPCONLY	Y10T428/12806		877
Y10T428/12812	12	Diverse refractory group metal-base components: alternative to or next to each other	CPCONLY	Y10T428/12812		354
Y10T428/12819	12	Group VB metal-base component	CPCONLY	Y10T428/12819		342
Y10T428/12826	12	Group VIB metal-base component	CPCONLY	Y10T428/12826		335
Y10T428/12833	13	Alternative to or next to each other	CPCONLY	Y10T428/12833		150
Y10T428/1284	13	W-base component	CPCONLY	Y10T428/1284		257
Y10T428/12847	13	Cr-base component	CPCONLY	Y10T428/12847		455
Y10T428/12854	14	Next to Co-, Fe-, or Ni-base component	CPCONLY	Y10T428/12854		603
Y10T428/12861	11	Group VIII or IB metal-base component	CPCONLY	Y10T428/12861		620
Y10T428/12868	12	Group IB metal-base component alternative to platinum group metal-base component [e.g., precious metal, etc.]	CPCONLY	Y10T428/12868		241
Y10T428/12875	12	Platinum group metal-base component	CPCONLY	Y10T428/12875		703
Y10T428/12882	12	Cu-base component alternative to Ag-, Au-, or Ni-base component	CPCONLY	Y10T428/12882		372
Y10T428/12889	12	Au-base component	CPCONLY	Y10T428/12889		578
Y10T428/12896	12	Ag-base component	CPCONLY	Y10T428/12896		728
Y10T428/12903	12	Cu-base component	CPCONLY	Y10T428/12903		956
Y10T428/1291	13	Next to Co-, Cu-, or Ni-base component	CPCONLY	Y10T428/1291		857
Y10T428/12917	13	Next to Fe-base component	CPCONLY	Y10T428/12917		381
Y10T428/12924	14	Fe-base has 0.01-1.7% carbon [i.e., steel]	CPCONLY	Y10T428/12924		461
Y10T428/12931	12	Co-, Fe-, or Ni-base components, alternative to each other	CPCONLY	Y10T428/12931		833
Y10T428/12937	12	Co- or Ni-base component next to Fe-base component	CPCONLY	Y10T428/12937		744
Y10T428/12944	12	Ni-base component	CPCONLY	Y10T428/12944		1460
Y10T428/12951	12	Fe-base component	CPCONLY	Y10T428/12951		782
Y10T428/12958	13	Next to Fe-base component	CPCONLY	Y10T428/12958		593
Y10T428/12965	14	Both containing 0.01-1.7% carbon [i.e., steel]	CPCONLY	Y10T428/12965		519
Y10T428/12972	13	Containing 0.01-1.7% carbon [i.e., steel]	CPCONLY	Y10T428/12972		856
Y10T428/12979	14	Containing more than 10% nonferrous elements [e.g., high alloy, stainless]	CPCONLY	Y10T428/12979		688
Y10T428/12986	10	Adjacent functionally defined components	CPCONLY	Y10T428/12986		737
Y10T428/12993	9	Surface feature [e.g., rough, mirror]	CPCONLY	Y10T428/12993		1007
Y10T428/13	8	Hollow or container type article [e.g., tube, vase, etc.]	CPCONLY	Y10T428/13		3038
Y10T428/1303	9	Paper containing [e.g., paperboard, cardboard, fiberboard, etc.]	CPCONLY	Y10T428/1303		977
Y10T428/1307	10	Bag or tubular film [e.g., pouch, flexible food casing, envelope, etc.]	CPCONLY	Y10T428/1307		428
Y10T428/131	9	Glass, ceramic, or sintered, fused, fired, or calcined metal oxide or metal carbide containing [e.g., porcelain, brick, cement, etc.]	CPCONLY	Y10T428/131		818
Y10T428/1314	10	Contains fabric, fiber particle, or filament made of glass, ceramic, or sintered, fused, fired, or calcined metal oxide, or metal carbide or other inorganic compound [e.g., fiber glass, mineral fiber, sand, etc.]	CPCONLY	Y10T428/1314		727
Y10T428/1317	10	Multilayer [continuous layer]	CPCONLY	Y10T428/1317		588
Y10T428/1321	11	Polymer or resin containing [i.e., natural or synthetic]	CPCONLY	Y10T428/1321		563
Y10T428/1324	9	Flexible food casing [e.g., sausage type, etc.]	CPCONLY	Y10T428/1324		434
Y10T428/1328	9	Shrinkable or shrunk [e.g., due to heat, solvent, volatile agent, restraint removal, etc.]	CPCONLY	Y10T428/1328		834
Y10T428/1331	10	Single layer [continuous layer]	CPCONLY	Y10T428/1331		318
Y10T428/1334	9	Nonself-supporting tubular film or bag [e.g., pouch, envelope, packet, etc.]	CPCONLY	Y10T428/1334		1636
Y10T428/1338	10	Elemental metal containing	CPCONLY	Y10T428/1338		276
Y10T428/1341	10	Contains vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit	CPCONLY	Y10T428/1341		587
Y10T428/1345	10	Single layer [continuous layer]	CPCONLY	Y10T428/1345		405
Y10T428/1348	9	Cellular material derived from plant or animal source [e.g., wood, cotton, wool, leather, etc.]	CPCONLY	Y10T428/1348		265
Y10T428/1352	9	Polymer or resin containing [i.e., natural or synthetic]	CPCONLY	Y10T428/1352		4699
Y10T428/1355	10	Elemental metal containing [e.g., substrate, foil, film, coating, etc.]	CPCONLY	Y10T428/1355		944
Y10T428/1359	11	Three or more layers [continuous layer]	CPCONLY	Y10T428/1359		910
Y10T428/1362	10	Textile, fabric, cloth, or pile containing [e.g., web, net, woven, knitted, mesh, nonwoven, matted, etc.]	CPCONLY	Y10T428/1362		1129
Y10T428/1366	11	Textile, fabric, cloth, or pile is sandwiched between two distinct layers of material unlike the textile, fabric, cloth, or pile layer	CPCONLY	Y10T428/1366		274
Y10T428/1369	10	Fiber or fibers wound around each other or into a self-sustaining shape [e.g., yarn, braid, fibers shaped around a core, etc.]	CPCONLY	Y10T428/1369		477
Y10T428/1372	10	Randomly noninterengaged or randomly contacting fibers, filaments, particles, or flakes	CPCONLY	Y10T428/1372		631
Y10T428/1376	10	Foam or porous material containing	CPCONLY	Y10T428/1376		807
Y10T428/1379	10	Contains vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit	CPCONLY	Y10T428/1379		1092
Y10T428/1383	11	Vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit is sandwiched between layers [continuous layer]	CPCONLY	Y10T428/1383		797
Y10T428/1386	10	Natural or synthetic rubber or rubber-like compound containing	CPCONLY	Y10T428/1386		776
Y10T428/139	10	Open-ended, self-supporting conduit, cylinder, or tube-type article	CPCONLY	Y10T428/139		2331
Y10T428/1393	11	Multilayer [continuous layer]	CPCONLY	Y10T428/1393		2062
Y10T428/1397	10	Single layer [continuous layer]	CPCONLY	Y10T428/1397		1176
Y10T428/14	8	Layer or component removable to expose adhesive	CPCONLY	Y10T428/14		2865
Y10T428/1405	9	Capsule or particulate matter containing [e.g., sphere, flake, microballoon, etc.]	CPCONLY	Y10T428/1405		271
Y10T428/141	9	Bituminous	CPCONLY	Y10T428/141		93
Y10T428/1414	9	Ceramic, glass, glasslike, vitreous	CPCONLY	Y10T428/1414		104
Y10T428/1419	9	Wax containing	CPCONLY	Y10T428/1419		105
Y10T428/1424	9	Halogen containing compound	CPCONLY	Y10T428/1424		143
Y10T428/1429	10	Fluorine	CPCONLY	Y10T428/1429		84
Y10T428/1433	10	Coloring agent containing	CPCONLY	Y10T428/1433		33
Y10T428/1438	9	Metal containing	CPCONLY	Y10T428/1438		263
Y10T428/1443	10	Aluminum	CPCONLY	Y10T428/1443		115
Y10T428/1448	10	Coloring agent containing	CPCONLY	Y10T428/1448		34
Y10T428/1452	9	Polymer derived only from ethylenically unsaturated monomer	CPCONLY	Y10T428/1452		593
Y10T428/1457	10	Silicon	CPCONLY	Y10T428/1457		160
Y10T428/1462	9	Polymer derived from material having at least one acrylic or alkacrylic group or the nitrile or amide derivative thereof [e.g., acrylamide, acrylate ester, etc.]	CPCONLY	Y10T428/1462		454
Y10T428/1467	9	Coloring agent	CPCONLY	Y10T428/1467		241
Y10T428/1471	9	Protective layer	CPCONLY	Y10T428/1471		751
Y10T428/1476	9	Release layer	CPCONLY	Y10T428/1476		1736
Y10T428/1481	9	Dissimilar adhesives	CPCONLY	Y10T428/1481		287
Y10T428/1486	9	Ornamental, decorative, pattern, or indicia	CPCONLY	Y10T428/1486		955
Y10T428/149	9	Sectional layer removable	CPCONLY	Y10T428/149		588
Y10T428/1495	10	Adhesive is on removable layer	CPCONLY	Y10T428/1495		575
Y10T428/15	8	Sheet, web, or layer weakened to permit separation through thickness	CPCONLY	Y10T428/15		2021
Y10T428/16	8	Two dimensionally sectional layer	CPCONLY	Y10T428/16		397
Y10T428/161	9	with frame, casing, or perimeter structure	CPCONLY	Y10T428/161		227
Y10T428/162	9	Transparent or translucent layer or section	CPCONLY	Y10T428/162		260
Y10T428/163	9	Next to unitary web or sheet of equal or greater extent	CPCONLY	Y10T428/163		320
Y10T428/164	10	Continuous two dimensionally sectional layer	CPCONLY	Y10T428/164		234
Y10T428/166	11	Glass, ceramic, or metal sections [e.g., floor or wall tile, etc.]	CPCONLY	Y10T428/166		367
Y10T428/167	11	Cellulosic sections [e.g., parquet floor, etc.]	CPCONLY	Y10T428/167		162
Y10T428/168	10	Nonrectangular	CPCONLY	Y10T428/168		77
Y10T428/169	9	Sections connected flexibly with external fastener	CPCONLY	Y10T428/169		236
Y10T428/17	8	Three or more coplanar interfitted sections with securing means	CPCONLY	Y10T428/17		332
Y10T428/18	8	Longitudinally sectional layer of three or more sections	CPCONLY	Y10T428/18		317
Y10T428/183	9	Next to unitary sheet of equal or greater extent	CPCONLY	Y10T428/183		160
Y10T428/187	10	Continuous sectional layer	CPCONLY	Y10T428/187		183
Y10T428/19	8	Sheets or webs edge spliced or joined	CPCONLY	Y10T428/19		845
Y10T428/192	9	Sheets or webs coplanar	CPCONLY	Y10T428/192		782
Y10T428/193	10	Double faced corrugated sheets or webs connected	CPCONLY	Y10T428/193		77
Y10T428/195	10	Beveled, stepped, or skived in thickness	CPCONLY	Y10T428/195		436
Y10T428/197	10	with noncoplanar reinforcement	CPCONLY	Y10T428/197		369
Y10T428/198	11	Pile or nap surface sheets connected	CPCONLY	Y10T428/198		113
Y10T428/20	8	Patched hole or depression	CPCONLY	Y10T428/20		484
Y10T428/21	8	Circular sheet or circular blank	CPCONLY	Y10T428/21		1671
Y10T428/211	9	Gear	CPCONLY	Y10T428/211		51
Y10T428/213	9	Frictional	CPCONLY	Y10T428/213		127
Y10T428/214	9	End closure	CPCONLY	Y10T428/214		95
Y10T428/215	9	Seal, gasket, or packing	CPCONLY	Y10T428/215		232
Y10T428/216	9	Ornamental, decorative, pattern, or indicia	CPCONLY	Y10T428/216		195
Y10T428/218	9	Aperture containing	CPCONLY	Y10T428/218		386
Y10T428/219	9	Edge structure	CPCONLY	Y10T428/219		171
Y10T428/22	8	Nonparticulate element embedded or inlaid in substrate and visible	CPCONLY	Y10T428/22		606
Y10T428/23	8	Sheet including cover or casing	CPCONLY	Y10T428/23		945
Y10T428/231	9	Filled with gas other than air; or under vacuum	CPCONLY	Y10T428/231		437
Y10T428/232	9	Encased layer derived from inorganic settable ingredient	CPCONLY	Y10T428/232		166
Y10T428/233	9	Foamed or expanded material encased	CPCONLY	Y10T428/233		921
Y10T428/234	9	including elements cooperating to form cells	CPCONLY	Y10T428/234		378
Y10T428/236	10	Honeycomb type cells extend perpendicularly to nonthickness layer	CPCONLY	Y10T428/236		320
Y10T428/237	9	Noninterengaged fibered material encased [e.g., mat, batt, etc.]	CPCONLY	Y10T428/237		578
Y10T428/238	10	Metal cover or casing	CPCONLY	Y10T428/238		112
Y10T428/239	9	Complete cover or casing	CPCONLY	Y10T428/239		1776
Y10T428/23907	8	Pile or nap type surface or component	CPCONLY	Y10T428/23907		109
Y10T428/23914	9	Interlaminar	CPCONLY	Y10T428/23914		377
Y10T428/23921	9	With particles	CPCONLY	Y10T428/23921		223
Y10T428/23929	9	Edge feature or configured or discontinuous surface	CPCONLY	Y10T428/23929		490
Y10T428/23936	10	Differential pile length or surface	CPCONLY	Y10T428/23936		307
Y10T428/23943	9	Flock surface	CPCONLY	Y10T428/23943		678
Y10T428/2395	9	Nap type surface	CPCONLY	Y10T428/2395		576
Y10T428/23957	9	Particular shape or structure of pile	CPCONLY	Y10T428/23957		664
Y10T428/23964	10	U-, V-, or W-shaped or continuous strand, filamentary material	CPCONLY	Y10T428/23964		189
Y10T428/23971	11	Continuous strand with adhesive bond to backing	CPCONLY	Y10T428/23971		88
Y10T428/23979	9	Particular backing structure or composition	CPCONLY	Y10T428/23979		1740
Y10T428/23986	9	With coating, impregnation, or bond	CPCONLY	Y10T428/23986		1170
Y10T428/23993	9	Composition of pile or adhesive	CPCONLY	Y10T428/23993		907
Y10T428/24	8	Structurally defined web or sheet [e.g., overall dimension, etc.]	CPCONLY	Y10T428/24		834
Y10T428/24008	9	including fastener for attaching to external surface	CPCONLY	Y10T428/24008		1805
Y10T428/24017	10	Hook or barb	CPCONLY	Y10T428/24017		1188
Y10T428/24025	9	Superposed movable attached layers or components	CPCONLY	Y10T428/24025		437
Y10T428/24033	9	including stitching and discrete fastener[s], coating or bond	CPCONLY	Y10T428/24033		942
Y10T428/24041	10	Discontinuous or differential coating, impregnation, or bond	CPCONLY	Y10T428/24041		157
Y10T428/2405	11	Coating, impregnation, or bond in stitching zone only	CPCONLY	Y10T428/2405		169
Y10T428/24058	9	including grain, strips, or filamentary elements in respective layers or components in angular relation	CPCONLY	Y10T428/24058		744
Y10T428/24066	10	Wood grain	CPCONLY	Y10T428/24066		429
Y10T428/24074	10	Strand or strand-portions	CPCONLY	Y10T428/24074		457
Y10T428/24083	11	Nonlinear strands or strand-portions	CPCONLY	Y10T428/24083		116
Y10T428/24091	11	with additional layer[s]	CPCONLY	Y10T428/24091		441
Y10T428/24099	12	On each side of strands or strand-portions	CPCONLY	Y10T428/24099		336
Y10T428/24107	13	including mechanically interengaged strands, strand-portions or strand-like strips	CPCONLY	Y10T428/24107		157
Y10T428/24116	11	Oblique to direction of web	CPCONLY	Y10T428/24116		246
Y10T428/24124	10	Fibers	CPCONLY	Y10T428/24124		1074
Y10T428/24132	9	including grain, strips, or filamentary elements in different layers or components parallel	CPCONLY	Y10T428/24132		1081
Y10T428/2414	9	including fringe	CPCONLY	Y10T428/2414		72
Y10T428/24149	9	Honeycomb-like	CPCONLY	Y10T428/24149		3113
Y10T428/24157	10	Filled honeycomb cells [e.g., solid substance in cavities, etc.]	CPCONLY	Y10T428/24157		666
Y10T428/24165	10	Hexagonally shaped cavities	CPCONLY	Y10T428/24165		580
Y10T428/24174	9	including sheet or component perpendicular to plane of web or sheet	CPCONLY	Y10T428/24174		1172
Y10T428/24182	10	Inward from edge of web or sheet	CPCONLY	Y10T428/24182		691
Y10T428/2419	9	Fold at edge	CPCONLY	Y10T428/2419		685
Y10T428/24198	10	Channel-shaped edge component [e.g., binding, etc.]	CPCONLY	Y10T428/24198		879
Y10T428/24207	10	with strand[s] or strand-portion[s] between layers [e.g., upholstery trim, etc.]	CPCONLY	Y10T428/24207		143
Y10T428/24215	10	Acute or reverse fold of exterior component	CPCONLY	Y10T428/24215		484
Y10T428/24223	11	Embedded in body of web	CPCONLY	Y10T428/24223		108
Y10T428/24231	11	At opposed marginal edges	CPCONLY	Y10T428/24231		420
Y10T428/2424	12	Annular cover	CPCONLY	Y10T428/2424		79
Y10T428/24248	13	One piece	CPCONLY	Y10T428/24248		122
Y10T428/24256	14	Abutted or lapped seam	CPCONLY	Y10T428/24256		138
Y10T428/24264	10	Particular fold structure [e.g., beveled, etc.]	CPCONLY	Y10T428/24264		308
Y10T428/24273	9	including aperture	CPCONLY	Y10T428/24273		2931
Y10T428/24281	10	Struck out portion type	CPCONLY	Y10T428/24281		360
Y10T428/24289	11	Embedded or interlocked	CPCONLY	Y10T428/24289		343
Y10T428/24298	10	Noncircular aperture [e.g., slit, diamond, rectangular, etc.]	CPCONLY	Y10T428/24298		714
Y10T428/24306	11	Diamond or hexagonal	CPCONLY	Y10T428/24306		201
Y10T428/24314	11	Slit or elongated	CPCONLY	Y10T428/24314		928
Y10T428/24322	10	Composite web or sheet	CPCONLY	Y10T428/24322		2533
Y10T428/24331	11	including nonapertured component	CPCONLY	Y10T428/24331		2411
Y10T428/24339	12	Keyed	CPCONLY	Y10T428/24339		470
Y10T428/24347	13	From both sides	CPCONLY	Y10T428/24347		259
Y10T428/24355	9	Continuous and nonuniform or irregular surface on layer or component [e.g., roofing, etc.]	CPCONLY	Y10T428/24355		4083
Y10T428/24364	10	with transparent or protective coating	CPCONLY	Y10T428/24364		695
Y10T428/24372	10	Particulate matter	CPCONLY	Y10T428/24372		1370
Y10T428/2438	11	Coated	CPCONLY	Y10T428/2438		294
Y10T428/24388	12	Silicon containing coating	CPCONLY	Y10T428/24388		184
Y10T428/24397	11	Carbohydrate	CPCONLY	Y10T428/24397		68
Y10T428/24405	11	Polymer or resin [e.g., natural or synthetic rubber, etc.]	CPCONLY	Y10T428/24405		547
Y10T428/24413	11	Metal or metal compound	CPCONLY	Y10T428/24413		542
Y10T428/24421	11	Silicon containing	CPCONLY	Y10T428/24421		455
Y10T428/2443	12	Sand, clay, or crushed rock or slate	CPCONLY	Y10T428/2443		278
Y10T428/24438	10	Artificial wood or leather grain surface	CPCONLY	Y10T428/24438		561
Y10T428/24446	10	Wrinkled, creased, crinkled or creped	CPCONLY	Y10T428/24446		654
Y10T428/24455	11	Paper	CPCONLY	Y10T428/24455		420
Y10T428/24463	12	Plural paper components	CPCONLY	Y10T428/24463		296
Y10T428/24471	10	Crackled, crazed or slit	CPCONLY	Y10T428/24471		303
Y10T428/24479	9	including variation in thickness	CPCONLY	Y10T428/24479		3805
Y10T428/24488	10	Differential nonuniformity at margin	CPCONLY	Y10T428/24488		701
Y10T428/24496	10	Foamed or cellular component	CPCONLY	Y10T428/24496		570
Y10T428/24504	11	Component comprises a polymer [e.g., rubber, etc.]	CPCONLY	Y10T428/24504		670
Y10T428/24512	12	Polyurethane	CPCONLY	Y10T428/24512		330
Y10T428/24521	10	with component conforming to contour of nonplanar surface	CPCONLY	Y10T428/24521		1005
Y10T428/24529	11	and conforming component on an opposite nonplanar surface	CPCONLY	Y10T428/24529		277
Y10T428/24537	11	Parallel ribs and/or grooves	CPCONLY	Y10T428/24537		506
Y10T428/24545	11	Containing metal or metal compound	CPCONLY	Y10T428/24545		372
Y10T428/24554	11	including cellulosic or natural rubber component	CPCONLY	Y10T428/24554		161
Y10T428/24562	10	Interlaminar spaces	CPCONLY	Y10T428/24562		771
Y10T428/2457	10	Parallel ribs and/or grooves	CPCONLY	Y10T428/2457		1986
Y10T428/24579	11	with particulate matter	CPCONLY	Y10T428/24579		156
Y10T428/24587	11	Oblique to longitudinal axis of web or sheet	CPCONLY	Y10T428/24587		130
Y10T428/24595	10	and varying density	CPCONLY	Y10T428/24595		258
Y10T428/24603	11	Fiber containing component	CPCONLY	Y10T428/24603		400
Y10T428/24612	10	Composite web or sheet	CPCONLY	Y10T428/24612		3766
Y10T428/2462	11	with partial filling of valleys on outer surface	CPCONLY	Y10T428/2462		283
Y10T428/24628	9	Nonplanar uniform thickness material	CPCONLY	Y10T428/24628		1553
Y10T428/24636	10	Embodying mechanically interengaged strand[s], strand-portion[s] or strand-like strip[s] [e.g., weave, knit, etc.]	CPCONLY	Y10T428/24636		346
Y10T428/24645	11	with folds in parallel planes	CPCONLY	Y10T428/24645		109
Y10T428/24653	10	Differential nonplanarity at margin	CPCONLY	Y10T428/24653		134
Y10T428/24661	10	Forming, or cooperating to form cells	CPCONLY	Y10T428/24661		1019
Y10T428/24669	10	Aligned or parallel nonplanarities	CPCONLY	Y10T428/24669		454
Y10T428/24678	11	Waffle-form	CPCONLY	Y10T428/24678		221
Y10T428/24686	11	Pleats or otherwise parallel adjacent folds	CPCONLY	Y10T428/24686		398
Y10T428/24694	11	Parallel corrugations	CPCONLY	Y10T428/24694		1024
Y10T428/24702	12	with locally deformed crests or intersecting series of corrugations	CPCONLY	Y10T428/24702		173
Y10T428/24711	12	Plural corrugated components	CPCONLY	Y10T428/24711		381
Y10T428/24719	13	with corrugations of respective components intersecting in plane projection	CPCONLY	Y10T428/24719		107
Y10T428/24727	13	with planar component	CPCONLY	Y10T428/24727		317
Y10T428/24736	10	Ornamental design or indicia	CPCONLY	Y10T428/24736		898
Y10T428/24744	9	Longitudinal or transverse tubular cavity or cell	CPCONLY	Y10T428/24744		1133
Y10T428/24752	9	Laterally noncoextensive components	CPCONLY	Y10T428/24752		884
Y10T428/2476	10	Fabric, cloth or textile component	CPCONLY	Y10T428/2476		298
Y10T428/24769	10	Cellulosic	CPCONLY	Y10T428/24769		205
Y10T428/24777	9	Edge feature	CPCONLY	Y10T428/24777		3447
Y10T428/24785	10	including layer embodying mechanically interengaged strands, strand portions or strand-like strips [e.g., weave, knit, etc.]	CPCONLY	Y10T428/24785		583
Y10T428/24793	10	Comprising discontinuous or differential impregnation or bond	CPCONLY	Y10T428/24793		1033
Y10T428/24802	9	Discontinuous or differential coating, impregnation or bond [e.g., artwork, printing, retouched photograph, etc.]	CPCONLY	Y10T428/24802		7325
Y10T428/2481	10	including layer of mechanically interengaged strands, strand-portions or strand-like strips	CPCONLY	Y10T428/2481		986
Y10T428/24818	11	Knitted, with particular or differential bond sites or intersections	CPCONLY	Y10T428/24818		131
Y10T428/24826	10	Spot bonds connect components	CPCONLY	Y10T428/24826		1570
Y10T428/24835	10	including developable image or soluble portion in coating or impregnation [e.g., safety paper, etc.]	CPCONLY	Y10T428/24835		301
Y10T428/24843	10	with heat sealable or heat releasable adhesive layer	CPCONLY	Y10T428/24843		663
Y10T428/24851	10	Intermediate layer is discontinuous or differential	CPCONLY	Y10T428/24851		1596
Y10T428/2486	11	with outer strippable or release layer	CPCONLY	Y10T428/2486		663
Y10T428/24868	11	Translucent outer layer	CPCONLY	Y10T428/24868		1005
Y10T428/24876	12	Intermediate layer contains particulate material [e.g., pigment, etc.]	CPCONLY	Y10T428/24876		958
Y10T428/24884	12	Translucent layer comprises natural oil, wax, resin, gum, glue, gelatin	CPCONLY	Y10T428/24884		210
Y10T428/24893	10	including particulate material	CPCONLY	Y10T428/24893		1381
Y10T428/24901	11	including coloring matter	CPCONLY	Y10T428/24901		1450
Y10T428/24909	11	Free metal or mineral containing	CPCONLY	Y10T428/24909		417
Y10T428/24917	10	including metal layer	CPCONLY	Y10T428/24917		3557
Y10T428/24926	10	including ceramic, glass, porcelain or quartz layer	CPCONLY	Y10T428/24926		1598
Y10T428/24934	10	including paper layer	CPCONLY	Y10T428/24934		1135
Y10T428/24942	9	including components having same physical characteristic in differing degree	CPCONLY	Y10T428/24942		5256
Y10T428/2495	10	Thickness [relative or absolute]	CPCONLY	Y10T428/2495		3316
Y10T428/24959	11	of adhesive layers	CPCONLY	Y10T428/24959		493
Y10T428/24967	11	Absolute thicknesses specified	CPCONLY	Y10T428/24967		2361
Y10T428/24975	12	No layer or component greater than 5 mils thick	CPCONLY	Y10T428/24975		2456
Y10T428/24983	10	Hardness	CPCONLY	Y10T428/24983		701
Y10T428/24992	10	Density or compression of components	CPCONLY	Y10T428/24992		1276
Y10T428/249921	8	Web or sheet containing structurally defined element or component	CPCONLY	Y10T428/249921		2129
Y10T428/249922	9	Embodying intertwined or helical component[s]	CPCONLY	Y10T428/249922		538
Y10T428/249923	9	Including interlaminar mechanical fastener	CPCONLY	Y10T428/249923		468
Y10T428/249924	9	Noninterengaged fiber-containing paper-free web or sheet which is not of specified porosity	CPCONLY	Y10T428/249924		1042
Y10T428/249925	10	Fiber-containing wood product [e.g., hardboard, lumber, or wood board, etc.]	CPCONLY	Y10T428/249925		234
Y10T428/249926	10	Including paper layer	CPCONLY	Y10T428/249926		100
Y10T428/249927	10	Fiber embedded in a metal matrix	CPCONLY	Y10T428/249927		152
Y10T428/249928	10	Fiber embedded in a ceramic, glass, or carbon matrix	CPCONLY	Y10T428/249928		303
Y10T428/249929	11	Fibers are aligned substantially parallel	CPCONLY	Y10T428/249929		107
Y10T428/24993	12	Fiber is precoated	CPCONLY	Y10T428/24993		67
Y10T428/249931	11	Free metal or alloy fiber	CPCONLY	Y10T428/249931		38
Y10T428/249932	10	Fiber embedded in a layer derived from a water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T428/249932		224
Y10T428/249933	10	Fiber embedded in or on the surface of a natural or synthetic rubber matrix	CPCONLY	Y10T428/249933		232
Y10T428/249934	11	Fibers are aligned substantially parallel	CPCONLY	Y10T428/249934		148
Y10T428/249935	12	Fiber is nonlinear [e.g., crimped, sinusoidal, etc.]	CPCONLY	Y10T428/249935		43
Y10T428/249936	12	Fiber is precoated	CPCONLY	Y10T428/249936		30
Y10T428/249937	11	Fiber is precoated	CPCONLY	Y10T428/249937		69
Y10T428/249938	11	Composite or conjugate fiber [e.g., fiber contains more than one chemically different material in monofilament or multifilament form, etc.]	CPCONLY	Y10T428/249938		74
Y10T428/249939	11	Two or more layers	CPCONLY	Y10T428/249939		139
Y10T428/24994	10	Fiber embedded in or on the surface of a polymeric matrix	CPCONLY	Y10T428/24994		1094
Y10T428/249941	11	Fiber is on the surface of a polymeric matrix having no embedded portion	CPCONLY	Y10T428/249941		134
Y10T428/249942	11	Fibers are aligned substantially parallel	CPCONLY	Y10T428/249942		270
Y10T428/249943	12	Fiber is nonlinear [e.g., crimped, sinusoidal, etc.]	CPCONLY	Y10T428/249943		43
Y10T428/249944	12	Fiber is precoated	CPCONLY	Y10T428/249944		68
Y10T428/249945	12	Carbon or carbonaceous fiber	CPCONLY	Y10T428/249945		271
Y10T428/249946	12	Glass fiber	CPCONLY	Y10T428/249946		265
Y10T428/249947	12	Polymeric fiber	CPCONLY	Y10T428/249947		162
Y10T428/249948	11	Fiber is precoated	CPCONLY	Y10T428/249948		167
Y10T428/249949	11	Two or more chemically different fibers	CPCONLY	Y10T428/249949		102
Y10T428/24995	11	Two or more layers	CPCONLY	Y10T428/24995		332
Y10T428/249951	12	Including a free metal or alloy constituent	CPCONLY	Y10T428/249951		98
Y10T428/249952	12	At least one thermosetting synthetic polymeric material layer	CPCONLY	Y10T428/249952		168
Y10T428/249953	9	Composite having voids in a component [e.g., porous, cellular, etc.]	CPCONLY	Y10T428/249953		3472
Y10T428/249954	10	With chemically effective material or specified gas other than air, N, or carbon dioxide in void-containing component	CPCONLY	Y10T428/249954		410
Y10T428/249955	10	Void-containing component partially impregnated with adjacent component	CPCONLY	Y10T428/249955		466
Y10T428/249956	11	Void-containing component is inorganic	CPCONLY	Y10T428/249956		382
Y10T428/249957	12	Inorganic impregnant	CPCONLY	Y10T428/249957		235
Y10T428/249958	11	Void-containing component is synthetic resin or natural rubbers	CPCONLY	Y10T428/249958		693
Y10T428/249959	11	Void-containing component is wood or paper	CPCONLY	Y10T428/249959		112
Y10T428/24996	10	With internal element bridging layers, nonplanar interface between layers, or intermediate layer of commingled adjacent foam layers	CPCONLY	Y10T428/24996		338
Y10T428/249961	10	With gradual property change within a component	CPCONLY	Y10T428/249961		331
Y10T428/249962	10	Void-containing component has a continuous matrix of fibers only [e.g., porous paper, etc.]	CPCONLY	Y10T428/249962		269
Y10T428/249963	11	And a force disintegratable component [e.g., stencil sheet, etc.]	CPCONLY	Y10T428/249963		104
Y10T428/249964	11	Fibers of defined composition	CPCONLY	Y10T428/249964		247
Y10T428/249965	12	Cellulosic	CPCONLY	Y10T428/249965		177
Y10T428/249966	13	Plural cellulosic components	CPCONLY	Y10T428/249966		58
Y10T428/249967	10	Inorganic matrix in void-containing component	CPCONLY	Y10T428/249967		446
Y10T428/249968	11	Of hydraulic-setting material	CPCONLY	Y10T428/249968		241
Y10T428/249969	11	Of silicon-containing material [e.g., glass, etc.]	CPCONLY	Y10T428/249969		570
Y10T428/24997	11	Of metal-containing material	CPCONLY	Y10T428/24997		487
Y10T428/249971	10	Preformed hollow element-containing	CPCONLY	Y10T428/249971		270
Y10T428/249972	11	Resin or rubber element	CPCONLY	Y10T428/249972		298
Y10T428/249973	11	Mineral element	CPCONLY	Y10T428/249973		76
Y10T428/249974	11	Metal- or silicon-containing element	CPCONLY	Y10T428/249974		283
Y10T428/249975	10	Void shape specified [e.g., crushed, flat, round, etc.]	CPCONLY	Y10T428/249975		269
Y10T428/249976	10	Voids specified as closed	CPCONLY	Y10T428/249976		570
Y10T428/249977	11	Specified thickness of void-containing component [absolute or relative], numerical cell dimension or density	CPCONLY	Y10T428/249977		269
Y10T428/249978	10	Voids specified as micro	CPCONLY	Y10T428/249978		1131
Y10T428/249979	11	Specified thickness of void-containing component [absolute or relative] or numerical cell dimension	CPCONLY	Y10T428/249979		567
Y10T428/24998	11	Composite has more than two layers	CPCONLY	Y10T428/24998		530
Y10T428/249981	10	Plural void-containing components	CPCONLY	Y10T428/249981		1623
Y10T428/249982	10	With component specified as adhesive or bonding agent	CPCONLY	Y10T428/249982		741
Y10T428/249983	11	As outermost component	CPCONLY	Y10T428/249983		475
Y10T428/249984	11	Adhesive or bonding component contains voids	CPCONLY	Y10T428/249984		339
Y10T428/249985	11	Composition of adhesive or bonding component specified	CPCONLY	Y10T428/249985		618
Y10T428/249986	10	Void-containing component contains also a solid fiber or solid particle	CPCONLY	Y10T428/249986		1360
Y10T428/249987	10	With nonvoid component of specified composition	CPCONLY	Y10T428/249987		1029
Y10T428/249988	11	Of about the same composition as, and adjacent to, the void-containing component	CPCONLY	Y10T428/249988		499
Y10T428/249989	12	Integrally formed skin	CPCONLY	Y10T428/249989		415
Y10T428/24999	11	Inorganic	CPCONLY	Y10T428/24999		1001
Y10T428/249991	11	Synthetic resin or natural rubbers	CPCONLY	Y10T428/249991		1157
Y10T428/249992	12	Linear or thermoplastic	CPCONLY	Y10T428/249992		1023
Y10T428/249993	13	Hydrocarbon polymer	CPCONLY	Y10T428/249993		429
Y10T428/249994	9	Composite having a component wherein a constituent is liquid or is contained within preformed walls [e.g., impregnant-filled, previously void containing component, etc.]	CPCONLY	Y10T428/249994		398
Y10T428/249995	10	Constituent is in liquid form	CPCONLY	Y10T428/249995		187
Y10T428/249996	11	Ink in pores	CPCONLY	Y10T428/249996		136
Y10T428/249997	11	Encapsulated liquid	CPCONLY	Y10T428/249997		311
Y10T428/249998	10	Indefinite plurality of similar impregnated thin sheets [e.g., "decorative laminate" type, etc.]	CPCONLY	Y10T428/249998		59
Y10T428/249999	10	Differentially filled foam, filled plural layers, or filled layer with coat of filling material	CPCONLY	Y10T428/249999		129
Y10T428/25	8	Web or sheet containing structurally defined element or component and including a second component containing structurally defined particles	CPCONLY	Y10T428/25		5801
Y10T428/251	9	Mica	CPCONLY	Y10T428/251		617
Y10T428/252	9	Glass or ceramic [i.e., fired or glazed clay, cement, etc.] [porcelain, quartz, etc.]	CPCONLY	Y10T428/252		1839
Y10T428/253	9	Cellulosic [e.g., wood, paper, cork, rayon, etc.]	CPCONLY	Y10T428/253		664
Y10T428/254	9	Polymeric or resinous material	CPCONLY	Y10T428/254		2569
Y10T428/256	9	Heavy metal or aluminum or compound thereof	CPCONLY	Y10T428/256		3001
Y10T428/257	10	Iron oxide or aluminum oxide	CPCONLY	Y10T428/257		1437
Y10T428/258	9	Alkali metal or alkaline earth metal or compound thereof	CPCONLY	Y10T428/258		845
Y10T428/259	9	Silicic material	CPCONLY	Y10T428/259		2274
Y10T428/26	8	Web or sheet containing structurally defined element or component, the element or component having a specified physical dimension	CPCONLY	Y10T428/26		4188
Y10T428/261	9	In terms of molecular thickness or light wave length	CPCONLY	Y10T428/261		558
Y10T428/263	9	Coating layer not in excess of 5 mils thick or equivalent	CPCONLY	Y10T428/263		1244
Y10T428/264	10	Up to 3 mils	CPCONLY	Y10T428/264		1258
Y10T428/265	11	1 mil or less	CPCONLY	Y10T428/265		6602
Y10T428/266	9	of base or substrate	CPCONLY	Y10T428/266		1465
Y10T428/268	9	Monolayer with structurally defined element	CPCONLY	Y10T428/268		880
Y10T428/269	9	including synthetic resin or polymer layer or component	CPCONLY	Y10T428/269		2331
Y10T428/27	8	Web or sheet containing structurally defined element or component, the element or component having a specified weight per unit area [e.g., gms/sq cm, lbs/sq ft, etc.]	CPCONLY	Y10T428/27		916
Y10T428/273	9	of coating	CPCONLY	Y10T428/273		1031
Y10T428/277	10	Cellulosic substrate	CPCONLY	Y10T428/277		594
Y10T428/28	8	Web or sheet containing structurally defined element or component and having an adhesive outermost layer	CPCONLY	Y10T428/28		3856
Y10T428/2804	9	Next to metal	CPCONLY	Y10T428/2804		622
Y10T428/2809	9	including irradiated or wave energy treated component	CPCONLY	Y10T428/2809		452
Y10T428/2813	9	Heat or solvent activated or sealable	CPCONLY	Y10T428/2813		534
Y10T428/2817	10	Heat sealable	CPCONLY	Y10T428/2817		606
Y10T428/2822	11	Wax containing	CPCONLY	Y10T428/2822		127
Y10T428/2826	11	Synthetic resin or polymer	CPCONLY	Y10T428/2826		1597
Y10T428/283	10	Water activated	CPCONLY	Y10T428/283		189
Y10T428/2835	9	including moisture or waterproof component	CPCONLY	Y10T428/2835		249
Y10T428/2839	9	with release or antistick coating	CPCONLY	Y10T428/2839		1278
Y10T428/2843	9	including a primer layer	CPCONLY	Y10T428/2843		364
Y10T428/2848	9	Three or more layers	CPCONLY	Y10T428/2848		3165
Y10T428/2852	9	Adhesive compositions	CPCONLY	Y10T428/2852		1157
Y10T428/2857	10	including metal or compound thereof or natural rubber	CPCONLY	Y10T428/2857		553
Y10T428/2861	10	having readily strippable combined with readily readhearable properties [e.g., stick-ons, etc.]	CPCONLY	Y10T428/2861		177
Y10T428/2865	10	including monomer or polymer of carbohydrate [e.g., starch, dextrin, etc.] Or protein [e.g., casein, animal protein, etc.] Or derivative thereof	CPCONLY	Y10T428/2865		103
Y10T428/287	10	including epoxy group or epoxy polymer	CPCONLY	Y10T428/287		377
Y10T428/2874	10	including aldehyde or ketone condensation polymer [e.g., urea formaldehyde polymer, melamine formaldehyde polymer, etc.]	CPCONLY	Y10T428/2874		105
Y10T428/2878	10	including addition polymer from unsaturated monomer	CPCONLY	Y10T428/2878		758
Y10T428/2883	11	including addition polymer of diene monomer [e.g., SBR, SIS, etc.]	CPCONLY	Y10T428/2883		470
Y10T428/2887	11	including nitrogen containing polymer [e.g., polyacrylonitrile, polymethacrylonitrile, etc.]	CPCONLY	Y10T428/2887		306
Y10T428/2891	11	including addition polymer from alpha-beta unsaturated carboxylic acid [e.g., acrylic acid, methacrylic acid, etc.] Or derivative thereof	CPCONLY	Y10T428/2891		1396
Y10T428/2896	10	including nitrogen containing condensation polymer [e.g., polyurethane, polyisocyanate, etc.]	CPCONLY	Y10T428/2896		384
Y10T428/29	8	Coated or structually defined flake, particle, cell, strand, strand portion, rod, filament, macroscopic fiber or mass thereof	CPCONLY	Y10T428/29		1149
Y10T428/2902	9	Channel shape	CPCONLY	Y10T428/2902		264
Y10T428/2904	9	Staple length fiber	CPCONLY	Y10T428/2904		603
Y10T428/2905	10	Plural and with bonded intersections only	CPCONLY	Y10T428/2905		118
Y10T428/2907	10	with coating or impregnation	CPCONLY	Y10T428/2907		483
Y10T428/2909	10	Nonlinear [e.g., crimped, coiled, etc.]	CPCONLY	Y10T428/2909		251
Y10T428/2911	9	Mica flake	CPCONLY	Y10T428/2911		253
Y10T428/2913	9	Rod, strand, filament or fiber	CPCONLY	Y10T428/2913		2638
Y10T428/2915	10	including textile, cloth or fabric	CPCONLY	Y10T428/2915		736
Y10T428/2916	10	including boron or compound thereof [not as steel]	CPCONLY	Y10T428/2916		261
Y10T428/2918	10	including free carbon or carbide or therewith [not as steel]	CPCONLY	Y10T428/2918		1332
Y10T428/292	11	In coating or impregnation	CPCONLY	Y10T428/292		553
Y10T428/2922	10	Nonlinear [e.g., crimped, coiled, etc.]	CPCONLY	Y10T428/2922		632
Y10T428/2924	11	Composite	CPCONLY	Y10T428/2924		578
Y10T428/2925	11	Helical or coiled	CPCONLY	Y10T428/2925		352
Y10T428/2927	10	including structurally defined particulate matter	CPCONLY	Y10T428/2927		1000
Y10T428/2929	10	Bicomponent, conjugate, composite or collateral fibers or filaments [i.e., coextruded sheath-core or side-by-side type]	CPCONLY	Y10T428/2929		1826
Y10T428/2931	11	Fibers or filaments nonconcentric [e.g., side-by-side or eccentric, etc.]	CPCONLY	Y10T428/2931		797
Y10T428/2933	10	Coated or with bond, impregnation or core	CPCONLY	Y10T428/2933		2873
Y10T428/2935	11	Discontinuous or tubular or cellular core	CPCONLY	Y10T428/2935		410
Y10T428/2936	11	Wound or wrapped core or coating [i.e., spiral or helical]	CPCONLY	Y10T428/2936		701
Y10T428/2938	11	Coating on discrete and individual rods, strands or filaments	CPCONLY	Y10T428/2938		1616
Y10T428/294	11	including metal or compound thereof [excluding glass, ceramic and asbestos]	CPCONLY	Y10T428/294		1470
Y10T428/2942	12	Plural coatings	CPCONLY	Y10T428/2942		313
Y10T428/2944	13	Free metal in coating	CPCONLY	Y10T428/2944		267
Y10T428/2945	13	Natural rubber in coating	CPCONLY	Y10T428/2945		97
Y10T428/2947	13	Synthetic resin or polymer in plural coatings, each of different type	CPCONLY	Y10T428/2947		573
Y10T428/2949	13	Glass, ceramic or metal oxide in coating	CPCONLY	Y10T428/2949		325
Y10T428/2951	12	Metal with weld modifying or stabilizing coating [e.g., flux, slag, producer, etc.]	CPCONLY	Y10T428/2951		127
Y10T428/2953	13	Titanium compound in coating	CPCONLY	Y10T428/2953		113
Y10T428/2955	13	Silicic material in coating	CPCONLY	Y10T428/2955		187
Y10T428/2956	12	Glass or silicic fiber or filament with metal coating	CPCONLY	Y10T428/2956		156
Y10T428/2958	12	Metal or metal compound in coating	CPCONLY	Y10T428/2958		877
Y10T428/296	12	Rubber, cellulosic or silicic material in coating	CPCONLY	Y10T428/296		306
Y10T428/2962	11	Silane, silicone or siloxane in coating	CPCONLY	Y10T428/2962		860
Y10T428/2964	11	Artificial fiber or filament	CPCONLY	Y10T428/2964		1177
Y10T428/2965	12	Cellulosic	CPCONLY	Y10T428/2965		589
Y10T428/2967	12	Synthetic resin or polymer	CPCONLY	Y10T428/2967		1262
Y10T428/2969	13	Polyamide, polyimide or polyester	CPCONLY	Y10T428/2969		1482
Y10T428/2971	11	Impregnation	CPCONLY	Y10T428/2971		433
Y10T428/2973	10	Particular cross section	CPCONLY	Y10T428/2973		1035
Y10T428/2975	11	Tubular or cellular	CPCONLY	Y10T428/2975		796
Y10T428/2976	11	Longitudinally varying	CPCONLY	Y10T428/2976		419
Y10T428/2978	11	Surface characteristic	CPCONLY	Y10T428/2978		514
Y10T428/298	10	Physical dimension	CPCONLY	Y10T428/298		1369
Y10T428/2982	9	Particulate matter [e.g., sphere, flake, etc.]	CPCONLY	Y10T428/2982		5889
Y10T428/2984	10	Microcapsule with fluid core [includes liposome]	CPCONLY	Y10T428/2984		1257
Y10T428/2985	11	Solid-walled microcapsule from synthetic polymer	CPCONLY	Y10T428/2985		617
Y10T428/2987	12	Addition polymer from unsaturated monomers only	CPCONLY	Y10T428/2987		463
Y10T428/2989	10	Microcapsule with solid core [includes liposome]	CPCONLY	Y10T428/2989		891
Y10T428/2991	10	Coated	CPCONLY	Y10T428/2991		4257
Y10T428/2993	11	Silicic or refractory material containing [e.g., tungsten oxide, glass, cement, etc.]	CPCONLY	Y10T428/2993		1978
Y10T428/2995	12	Silane, siloxane or silicone coating	CPCONLY	Y10T428/2995		985
Y10T428/2996	12	Glass particles or spheres	CPCONLY	Y10T428/2996		675
Y10T428/2998	11	including synthetic resin or polymer	CPCONLY	Y10T428/2998		2836
Y10T428/30	8	Self-sustaining carbon mass or layer with impregnant or other layer	CPCONLY	Y10T428/30		4185
Y10T428/31	8	Surface property or characteristic of web, sheet or block	CPCONLY	Y10T428/31		1516
Y10T428/315	9	Surface modified glass [e.g., tempered, strengthened, etc.]	CPCONLY	Y10T428/315		635
Y10T428/31504	8	Composite [nonstructural laminate]	CPCONLY	Y10T428/31504		4095
Y10T428/31507	9	Of polycarbonate	CPCONLY	Y10T428/31507		3069
Y10T428/31511	9	Of epoxy ether	CPCONLY	Y10T428/31511		3150
Y10T428/31515	10	As intermediate layer	CPCONLY	Y10T428/31515		1060
Y10T428/31518	11	Next to glass or quartz	CPCONLY	Y10T428/31518		374
Y10T428/31522	11	Next to metal	CPCONLY	Y10T428/31522		902
Y10T428/31525	10	Next to glass or quartz	CPCONLY	Y10T428/31525		473
Y10T428/31529	10	Next to metal	CPCONLY	Y10T428/31529		1446
Y10T428/31533	9	Of polythioether	CPCONLY	Y10T428/31533		529
Y10T428/31536	9	Including interfacial reaction product of adjacent layers	CPCONLY	Y10T428/31536		539
Y10T428/3154	9	Of fluorinated addition polymer from unsaturated monomers	CPCONLY	Y10T428/3154		3150
Y10T428/31544	10	Addition polymer is perhalogenated	CPCONLY	Y10T428/31544		2227
Y10T428/31547	9	Of polyisocyanurate	CPCONLY	Y10T428/31547		262
Y10T428/31551	9	Of polyamidoester [polyurethane, polyisocyanate, polycarbamate, etc.]	CPCONLY	Y10T428/31551		3693
Y10T428/31554	10	Next to second layer of polyamidoester	CPCONLY	Y10T428/31554		656
Y10T428/31558	10	Next to animal skin or membrane	CPCONLY	Y10T428/31558		151
Y10T428/31562	10	Next to polyamide [nylon, etc.]	CPCONLY	Y10T428/31562		392
Y10T428/31565	10	Next to polyester [polyethylene terephthalate, etc.]	CPCONLY	Y10T428/31565		935
Y10T428/31569	10	Next to natural rubber	CPCONLY	Y10T428/31569		185
Y10T428/31573	10	Next to addition polymer of ethylenically unsaturated monomer	CPCONLY	Y10T428/31573		637
Y10T428/31576	11	Ester monomer type [polyvinylacetate, etc.]	CPCONLY	Y10T428/31576		465
Y10T428/3158	11	Halide monomer type [polyvinyl chloride, etc.]	CPCONLY	Y10T428/3158		519
Y10T428/31583	11	Nitrile monomer type [polyacrylonitrile, etc.]	CPCONLY	Y10T428/31583		187
Y10T428/31587	11	Hydrocarbon polymer [polyethylene, polybutadiene, etc.]	CPCONLY	Y10T428/31587		657
Y10T428/31591	10	Next to cellulosic	CPCONLY	Y10T428/31591		658
Y10T428/31594	10	Next to aldehyde or ketone condensation product [phenol-aldehyde, etc.]	CPCONLY	Y10T428/31594		105
Y10T428/31598	10	Next to silicon-containing [silicone, cement, etc.] layer	CPCONLY	Y10T428/31598		474
Y10T428/31601	11	Quartz or glass	CPCONLY	Y10T428/31601		525
Y10T428/31605	10	Next to free metal	CPCONLY	Y10T428/31605		1022
Y10T428/31609	10	Particulate metal or metal compound-containing	CPCONLY	Y10T428/31609		723
Y10T428/31612	11	As silicone, silane or siloxane	CPCONLY	Y10T428/31612		1032
Y10T428/31616	10	Next to polyester [e.g., alkyd]	CPCONLY	Y10T428/31616		511
Y10T428/3162	11	Cross-linked polyester [e.g., glycerol maleate-styrene, etc.]	CPCONLY	Y10T428/3162		166
Y10T428/31623	10	Next to polyamide or polyimide	CPCONLY	Y10T428/31623		366
Y10T428/31627	10	Next to aldehyde or ketone condensation product	CPCONLY	Y10T428/31627		364
Y10T428/3163	11	Next to acetal of polymerized unsaturated alcohol [e.g., formal butyral, etc.]	CPCONLY	Y10T428/3163		513
Y10T428/31634	10	Next to cellulosic	CPCONLY	Y10T428/31634		190
Y10T428/31638	11	Cellulosic ester	CPCONLY	Y10T428/31638		103
Y10T428/31641	10	Next to natural rubber, gum, oil, rosin, wax, bituminous or tarry residue	CPCONLY	Y10T428/31641		209
Y10T428/31645	10	Next to addition polymer from unsaturated monomers	CPCONLY	Y10T428/31645		858
Y10T428/31649	11	Ester, halide or nitrile of addition polymer	CPCONLY	Y10T428/31649		691
Y10T428/31652	9	Of asbestos	CPCONLY	Y10T428/31652		500
Y10T428/31656	10	With metal layer	CPCONLY	Y10T428/31656		184
Y10T428/31659	10	With cellulosic layer	CPCONLY	Y10T428/31659		96
Y10T428/31663	10	As siloxane, silicone or silane	CPCONLY	Y10T428/31663		6651
Y10T428/31667	10	Next to addition polymer from unsaturated monomers, or aldehyde or ketone condensation product	CPCONLY	Y10T428/31667		1442
Y10T428/3167	9	Of cork	CPCONLY	Y10T428/3167		213
Y10T428/31674	10	Including natural oil or gum or rosin [e.g., linoleum, etc.]	CPCONLY	Y10T428/31674		85
Y10T428/31678	9	Of metal	CPCONLY	Y10T428/31678		6562
Y10T428/31681	10	Next to polyester, polyamide or polyimide [e.g., alkyd, glue, or nylon, etc.]	CPCONLY	Y10T428/31681		3225
Y10T428/31685	11	Natural source polyamide [e.g., casein, gelatin, etc.]	CPCONLY	Y10T428/31685		92
Y10T428/31688	10	Next to aldehyde or ketone condensation product	CPCONLY	Y10T428/31688		751
Y10T428/31692	10	Next to addition polymer from unsaturated monomers	CPCONLY	Y10T428/31692		2774
Y10T428/31696	11	Including polyene monomers [e.g., butadiene, etc.]	CPCONLY	Y10T428/31696		830
Y10T428/31699	11	Ester, halide or nitrile of addition polymer	CPCONLY	Y10T428/31699		1829
Y10T428/31703	10	Next to cellulosic	CPCONLY	Y10T428/31703		615
Y10T428/31707	10	Next to natural rubber	CPCONLY	Y10T428/31707		361
Y10T428/3171	11	With natural rubber next to second layer of natural rubber	CPCONLY	Y10T428/3171		78
Y10T428/31714	10	Next to natural gum, natural oil, rosin, lac or wax	CPCONLY	Y10T428/31714		446
Y10T428/31717	10	Next to bituminous or tarry residue	CPCONLY	Y10T428/31717		158
Y10T428/31721	9	Of polyimide	CPCONLY	Y10T428/31721		2127
Y10T428/31725	9	Of polyamide	CPCONLY	Y10T428/31725		1936
Y10T428/31728	10	Next to second layer of polyamide	CPCONLY	Y10T428/31728		343
Y10T428/31732	11	At least one layer is nylon type	CPCONLY	Y10T428/31732		209
Y10T428/31736	10	Next to polyester	CPCONLY	Y10T428/31736		456
Y10T428/31739	10	Nylon type	CPCONLY	Y10T428/31739		568
Y10T428/31743	11	Next to addition polymer from unsaturated monomer[s]	CPCONLY	Y10T428/31743		636
Y10T428/31746	12	Polymer of monoethylenically unsaturated hydrocarbon	CPCONLY	Y10T428/31746		478
Y10T428/3175	10	Next to addition polymer from unsaturated monomer[s]	CPCONLY	Y10T428/3175		686
Y10T428/31754	11	Natural source-type polyamide	CPCONLY	Y10T428/31754		65
Y10T428/31757	11	Polymer of monoethylenically unsaturated hydrocarbon	CPCONLY	Y10T428/31757		474
Y10T428/31761	10	Next to aldehyde or ketone condensation product	CPCONLY	Y10T428/31761		103
Y10T428/31765	10	Inorganic-containing or next to inorganic-containing	CPCONLY	Y10T428/31765		321
Y10T428/31768	10	Natural source-type polyamide [e.g., casein, gelatin, etc.]	CPCONLY	Y10T428/31768		316
Y10T428/31772	11	Next to cellulosic	CPCONLY	Y10T428/31772		191
Y10T428/31775	12	Paper	CPCONLY	Y10T428/31775		372
Y10T428/31779	10	Next to cellulosic	CPCONLY	Y10T428/31779		119
Y10T428/31783	11	Paper or wood	CPCONLY	Y10T428/31783		221
Y10T428/31786	9	Of polyester [e.g., alkyd, etc.]	CPCONLY	Y10T428/31786		5648
Y10T428/3179	10	Next to cellulosic	CPCONLY	Y10T428/3179		807
Y10T428/31794	10	Of cross-linked polyester	CPCONLY	Y10T428/31794		542
Y10T428/31797	10	Next to addition polymer from unsaturated monomers	CPCONLY	Y10T428/31797		2630
Y10T428/31801	9	Of wax or waxy material	CPCONLY	Y10T428/31801		597
Y10T428/31804	10	Next to cellulosic	CPCONLY	Y10T428/31804		268
Y10T428/31808	11	Cellulosic is paper	CPCONLY	Y10T428/31808		437
Y10T428/31812	12	Glassine paper	CPCONLY	Y10T428/31812		85
Y10T428/31815	9	Of bituminous or tarry residue	CPCONLY	Y10T428/31815		771
Y10T428/31819	10	Next to cellulosic	CPCONLY	Y10T428/31819		146
Y10T428/31823	11	Paper	CPCONLY	Y10T428/31823		238
Y10T428/31826	9	Of natural rubber	CPCONLY	Y10T428/31826		869
Y10T428/3183	10	Next to second layer of natural rubber	CPCONLY	Y10T428/3183		327
Y10T428/31833	10	Next to aldehyde or ketone condensation product or addition polymer from unsaturated monomers	CPCONLY	Y10T428/31833		346
Y10T428/31837	11	Including polyene monomers	CPCONLY	Y10T428/31837		186
Y10T428/31841	10	Next to cellulosic	CPCONLY	Y10T428/31841		413
Y10T428/31844	9	Of natural gum, rosin, natural oil or lac	CPCONLY	Y10T428/31844		517
Y10T428/31848	10	Next to cellulosic	CPCONLY	Y10T428/31848		364
Y10T428/31851	11	Natural oil	CPCONLY	Y10T428/31851		253
Y10T428/31855	9	Of addition polymer from unsaturated monomers	CPCONLY	Y10T428/31855		4708
Y10T428/31859	10	Next to an aldehyde or ketone condensation product	CPCONLY	Y10T428/31859		202
Y10T428/31862	11	Melamine-aldehyde	CPCONLY	Y10T428/31862		160
Y10T428/31866	12	Impregnated or coated cellulosic material	CPCONLY	Y10T428/31866		122
Y10T428/3187	11	Amide-aldehyde	CPCONLY	Y10T428/3187		32
Y10T428/31873	12	Urea or modified urea-aldehyde	CPCONLY	Y10T428/31873		94
Y10T428/31877	11	Phenol-aldehyde	CPCONLY	Y10T428/31877		184
Y10T428/3188	10	Next to cellulosic	CPCONLY	Y10T428/3188		616
Y10T428/31884	11	Regenerated or modified cellulose	CPCONLY	Y10T428/31884		238
Y10T428/31888	12	Addition polymer of hydrocarbon[s] only	CPCONLY	Y10T428/31888		152
Y10T428/31891	12	Where addition polymer is an ester or halide	CPCONLY	Y10T428/31891		367
Y10T428/31895	11	Paper or wood	CPCONLY	Y10T428/31895		1285
Y10T428/31899	12	Addition polymer of hydrocarbon[s] only	CPCONLY	Y10T428/31899		336
Y10T428/31902	13	Monoethylenically unsaturated	CPCONLY	Y10T428/31902		686
Y10T428/31906	12	Ester, halide or nitrile of addition polymer	CPCONLY	Y10T428/31906		1096
Y10T428/31909	10	Next to second addition polymer from unsaturated monomers	CPCONLY	Y10T428/31909		2012
Y10T428/31913	11	Monoolefin polymer	CPCONLY	Y10T428/31913		3257
Y10T428/31917	12	Next to polyene polymer	CPCONLY	Y10T428/31917		812
Y10T428/3192	12	Next to vinyl or vinylidene chloride polymer	CPCONLY	Y10T428/3192		1321
Y10T428/31924	11	Including polyene monomers	CPCONLY	Y10T428/31924		754
Y10T428/31928	11	Ester, halide or nitrile of addition polymer	CPCONLY	Y10T428/31928		2542
Y10T428/31931	10	Polyene monomer-containing	CPCONLY	Y10T428/31931		1361
Y10T428/31935	10	Ester, halide or nitrile of addition polymer	CPCONLY	Y10T428/31935		3561
Y10T428/31938	10	Polymer of monoethylenically unsaturated hydrocarbon	CPCONLY	Y10T428/31938		2586
Y10T428/31942	9	Of aldehyde or ketone condensation product	CPCONLY	Y10T428/31942		824
Y10T428/31946	10	Next to second aldehyde or ketone condensation product	CPCONLY	Y10T428/31946		200
Y10T428/31949	10	Next to cellulosic	CPCONLY	Y10T428/31949		223
Y10T428/31953	11	Modified or regenerated cellulose	CPCONLY	Y10T428/31953		111
Y10T428/31957	11	Wood	CPCONLY	Y10T428/31957		329
Y10T428/3196	12	Phenoplast	CPCONLY	Y10T428/3196		193
Y10T428/31964	11	Paper	CPCONLY	Y10T428/31964		446
Y10T428/31967	12	Phenoplast	CPCONLY	Y10T428/31967		222
Y10T428/31971	9	Of carbohydrate	CPCONLY	Y10T428/31971		1301
Y10T428/31975	10	Of cellulosic next to another carbohydrate	CPCONLY	Y10T428/31975		341
Y10T428/31978	11	Cellulosic next to another cellulosic	CPCONLY	Y10T428/31978		226
Y10T428/31982	12	Wood or paper	CPCONLY	Y10T428/31982		860
Y10T428/31986	12	Regenerated or modified	CPCONLY	Y10T428/31986		476
Y10T428/31989	10	Of wood	CPCONLY	Y10T428/31989		1074
Y10T428/31993	10	Of paper	CPCONLY	Y10T428/31993		1766
Y10T428/31996	11	Next to layer of metal salt [e.g., plasterboard, etc.]	CPCONLY	Y10T428/31996		262
Y10T428/32	8	Composite [nonstructural laminate] of inorganic material having metal-compound-containing layer and having defined magnetic layer	CPCONLY	Y10T428/32		343
Y10T428/325	9	Magnetic layer next to second metal compound-containing layer	CPCONLY	Y10T428/325		109
Y10T428/4935	8	Impregnated naturally solid product [e.g., leather, stone, etc.]	CPCONLY	Y10T428/4935		248
Y10T428/662	9	Wood timber product [e.g., piling, post, veneer, etc.]	CPCONLY	Y10T428/662		564
Y10T428/8305	8	Miscellaneous [e.g., treated surfaces, etc.]	CPCONLY	Y10T428/8305		341
Y10T436/00	7	Chemistry: analytical and immunological testing	CPCONLY	Y10T436/00		6
Y10T436/10	8	Composition for standardization, calibration, simulation, stabilization, preparation or preservation; processes of use in preparation for chemical testing	CPCONLY	Y10T436/10		957
Y10T436/100833	9	Simulative of a gaseous composition	CPCONLY	Y10T436/100833		86
Y10T436/101666	9	Particle count or volume standard or control [e.g., platelet count standards, etc.]	CPCONLY	Y10T436/101666		441
Y10T436/102499	9	Blood gas standard or control	CPCONLY	Y10T436/102499		109
Y10T436/103332	9	Bilirubin or uric acid standard or control	CPCONLY	Y10T436/103332		66
Y10T436/104165	9	Lipid, cholesterol, or triglyceride standard or control	CPCONLY	Y10T436/104165		149
Y10T436/104998	9	Glucose, ketone, nitrate standard or control	CPCONLY	Y10T436/104998		126
Y10T436/105831	9	Protein or peptide standard or control [e.g., hemoglobin, etc.]	CPCONLY	Y10T436/105831		295
Y10T436/106664	9	Blood serum or blood plasma standard or control	CPCONLY	Y10T436/106664		285
Y10T436/107497	9	Preparation composition [e.g., lysing or precipitation, etc.]	CPCONLY	Y10T436/107497		479
Y10T436/108331	9	Preservative, buffer, anticoagulant or diluent	CPCONLY	Y10T436/108331		568
Y10T436/109163	9	Inorganic standards or controls	CPCONLY	Y10T436/109163		106
Y10T436/11	8	Automated chemical analysis	CPCONLY	Y10T436/11		1545
Y10T436/110833	9	Utilizing a moving indicator strip or tape	CPCONLY	Y10T436/110833		189
Y10T436/111666	9	Utilizing a centrifuge or compartmented rotor	CPCONLY	Y10T436/111666		437
Y10T436/112499	9	with sample on test slide	CPCONLY	Y10T436/112499		370
Y10T436/113332	9	with conveyance of sample along a test line in a container or rack	CPCONLY	Y10T436/113332		632
Y10T436/114165	10	with step of insertion or removal from test line	CPCONLY	Y10T436/114165		363
Y10T436/114998	10	with treatment or replacement of aspirator element [e.g., cleaning, etc.]	CPCONLY	Y10T436/114998		292
Y10T436/115831	9	Condition or time responsive	CPCONLY	Y10T436/115831		461
Y10T436/116664	10	with automated titrator	CPCONLY	Y10T436/116664		110
Y10T436/117497	9	with a continuously flowing sample or carrier stream	CPCONLY	Y10T436/117497		529
Y10T436/118339	10	with formation of a segmented stream	CPCONLY	Y10T436/118339		280
Y10T436/119163	9	with aspirator of claimed structure	CPCONLY	Y10T436/119163		290
Y10T436/12	8	Condition responsive control	CPCONLY	Y10T436/12		830
Y10T436/13	8	Tracers or tags	CPCONLY	Y10T436/13		662
Y10T436/14	8	Heterocyclic carbon compound [i.e. , O, S, N, Se, Te, as only ring hetero atom]	CPCONLY	Y10T436/14		136
Y10T436/141111	9	Diverse hetero atoms in same or different rings [e.g., alkaloids, opiates, etc.]	CPCONLY	Y10T436/141111		170
Y10T436/142222	9	Hetero-O [e.g., ascorbic acid, etc.]	CPCONLY	Y10T436/142222		289
Y10T436/143333	10	Saccharide [e.g., DNA, etc.]	CPCONLY	Y10T436/143333		2125
Y10T436/144444	11	Glucose	CPCONLY	Y10T436/144444		533
Y10T436/145555	9	Hetero-N	CPCONLY	Y10T436/145555		274
Y10T436/146666	10	Bile pigment	CPCONLY	Y10T436/146666		155
Y10T436/147777	10	Plural nitrogen in the same ring [e.g., barbituates, creatinine, etc.]	CPCONLY	Y10T436/147777		259
Y10T436/148888	11	Uric acid	CPCONLY	Y10T436/148888		52
Y10T436/15	8	Inorganic acid or base [e.g. , hcl, sulfuric acid, etc. ]	CPCONLY	Y10T436/15		162
Y10T436/153333	9	Halogen containing	CPCONLY	Y10T436/153333		81
Y10T436/156666	9	Sulfur containing	CPCONLY	Y10T436/156666		48
Y10T436/16	8	Phosphorus containing	CPCONLY	Y10T436/16		202
Y10T436/163333	9	Organic [e.g., chemical warfare agents, insecticides, etc.]	CPCONLY	Y10T436/163333		222
Y10T436/166666	9	of inorganic phosphorus compound in body fluid	CPCONLY	Y10T436/166666		40
Y10T436/17	8	Nitrogen containing	CPCONLY	Y10T436/17		405
Y10T436/170769	9	N-Nitroso containing [e.g., nitrosamine, etc.]	CPCONLY	Y10T436/170769		68
Y10T436/171538	9	Urea or blood urea nitrogen	CPCONLY	Y10T436/171538		119
Y10T436/172307	9	Cyanide or isocyanide	CPCONLY	Y10T436/172307		114
Y10T436/173076	9	Nitrite or nitrate	CPCONLY	Y10T436/173076		203
Y10T436/173845	9	Amine and quaternary ammonium	CPCONLY	Y10T436/173845		444
Y10T436/174614	10	Tertiary amine	CPCONLY	Y10T436/174614		75
Y10T436/175383	10	Ammonia	CPCONLY	Y10T436/175383		194
Y10T436/176152	9	Total nitrogen determined	CPCONLY	Y10T436/176152		65
Y10T436/176921	10	As part of an elemental analysis	CPCONLY	Y10T436/176921		37
Y10T436/177692	9	Oxides of nitrogen	CPCONLY	Y10T436/177692		207
Y10T436/178459	10	Only nitrogen dioxide	CPCONLY	Y10T436/178459		97
Y10T436/179228	10	Both nitrogen oxide and dioxide	CPCONLY	Y10T436/179228		92
Y10T436/18	8	Sulfur containing	CPCONLY	Y10T436/18		242
Y10T436/182	9	Organic or sulfhydryl containing [e.g., mercaptan, hydrogen, sulfide, etc.]	CPCONLY	Y10T436/182		203
Y10T436/184	10	Only hydrogen sulfide	CPCONLY	Y10T436/184		138
Y10T436/186	9	Sulfur dioxide	CPCONLY	Y10T436/186		152
Y10T436/188	9	Total or elemental sulfur	CPCONLY	Y10T436/188		98
Y10T436/19	8	Halogen containing	CPCONLY	Y10T436/19		317
Y10T436/193333	9	In aqueous solution	CPCONLY	Y10T436/193333		249
Y10T436/196666	9	Carbon containing compound [e.g., vinylchloride, etc.]	CPCONLY	Y10T436/196666		151
Y10T436/20	8	Oxygen containing	CPCONLY	Y10T436/20		287
Y10T436/200833	9	Carbonyl, ether, aldehyde or ketone containing	CPCONLY	Y10T436/200833		367
Y10T436/201666	10	Carboxylic acid	CPCONLY	Y10T436/201666		247
Y10T436/202499	10	Formaldehyde or acetone	CPCONLY	Y10T436/202499		107
Y10T436/203332	9	Hydroxyl containing	CPCONLY	Y10T436/203332		256
Y10T436/204165	10	Ethanol	CPCONLY	Y10T436/204165		191
Y10T436/204998	9	Inorganic carbon compounds	CPCONLY	Y10T436/204998		318
Y10T436/205831	10	Carbon monoxide only	CPCONLY	Y10T436/205831		176
Y10T436/206664	9	Ozone or peroxide	CPCONLY	Y10T436/206664		267
Y10T436/207497	9	Molecular oxygen	CPCONLY	Y10T436/207497		254
Y10T436/208339	10	Fuel/air mixture or exhaust gas analysis	CPCONLY	Y10T436/208339		114
Y10T436/209163	10	Dissolved or trace oxygen or oxygen content of a sealed environment	CPCONLY	Y10T436/209163		160
Y10T436/21	8	Hydrocarbon	CPCONLY	Y10T436/21		369
Y10T436/212	9	Aromatic	CPCONLY	Y10T436/212		173
Y10T436/214	9	Acyclic [e.g., methane, octane, isoparaffin, etc.]	CPCONLY	Y10T436/214		204
Y10T436/216	10	Unsaturated [e.g., ethylene, diene, etc.]	CPCONLY	Y10T436/216		123
Y10T436/218	9	Total hydrocarbon, flammability, combustibility [e.g., air-fuel mixture, etc.]	CPCONLY	Y10T436/218		153
Y10T436/22	8	Hydrogen, per se	CPCONLY	Y10T436/22		182
Y10T436/23	8	Carbon containing	CPCONLY	Y10T436/23		187
Y10T436/235	9	In an aqueous solution [e.g., TOC, etc.]	CPCONLY	Y10T436/235		150
Y10T436/24	8	Nuclear magnetic resonance, electron spin resonance or other spin effects or mass spectrometry	CPCONLY	Y10T436/24		1462
Y10T436/25	8	including sample preparation	CPCONLY	Y10T436/25		2058
Y10T436/25125	9	Digestion or removing interfering materials	CPCONLY	Y10T436/25125		807
Y10T436/2525	9	Stabilizing or preserving	CPCONLY	Y10T436/2525		314
Y10T436/25375	9	Liberation or purification of sample or separation of material from a sample [e.g., filtering, centrifuging, etc.]	CPCONLY	Y10T436/25375		1753
Y10T436/255	10	including use of a solid sorbent, semipermeable membrane, or liquid extraction	CPCONLY	Y10T436/255		1415
Y10T436/25625	9	Dilution	CPCONLY	Y10T436/25625		320
Y10T436/2575	9	Volumetric liquid transfer	CPCONLY	Y10T436/2575		2217
Y10T436/25875	9	Gaseous sample or with change of physical state	CPCONLY	Y10T436/25875		525
Y10T442/00	7	Fabric [woven, knitted, or nonwoven textile or cloth, etc.]	CPCONLY	Y10T442/00		1
Y10T442/10	8	Scrim [e.g., open net or mesh, gauze, loose or open weave or knit, etc.]	CPCONLY	Y10T442/10		585
Y10T442/102	9	Woven scrim	CPCONLY	Y10T442/102		207
Y10T442/103	10	Including a multifilament fiber precoated with other than free metal or alloy prior to weaving	CPCONLY	Y10T442/103		29
Y10T442/105	10	Comprising a composite fiber	CPCONLY	Y10T442/105		38
Y10T442/107	10	Comprising at least two chemically different fibers	CPCONLY	Y10T442/107		54
Y10T442/109	10	Metal or metal-coated fiber-containing scrim	CPCONLY	Y10T442/109		176
Y10T442/11	11	Including an additional free metal or alloy constituent	CPCONLY	Y10T442/11		56
Y10T442/112	12	Particulate free metal or alloy constituent	CPCONLY	Y10T442/112		17
Y10T442/114	11	Including a foam layer	CPCONLY	Y10T442/114		21
Y10T442/116	11	Including a woven fabric which is not a scrim	CPCONLY	Y10T442/116		38
Y10T442/117	12	Including a nonwoven fabric which is not a scrim	CPCONLY	Y10T442/117		7
Y10T442/119	11	Including a paper layer	CPCONLY	Y10T442/119		20
Y10T442/121	11	Including a nonwoven fabric which is not a scrim	CPCONLY	Y10T442/121		43
Y10T442/122	12	Two or more nonwoven fabric layers	CPCONLY	Y10T442/122		10
Y10T442/124	11	Including a natural or synthetic rubber layer	CPCONLY	Y10T442/124		35
Y10T442/126	11	Including a preformed film, foil, or sheet	CPCONLY	Y10T442/126		66
Y10T442/128	11	Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T442/128		16
Y10T442/129	11	Including a ceramic or glass layer	CPCONLY	Y10T442/129		36
Y10T442/131	11	Including a coating or impregnation of synthetic polymeric material	CPCONLY	Y10T442/131		89
Y10T442/133	10	Inorganic fiber-containing scrim	CPCONLY	Y10T442/133		103
Y10T442/134	11	Including a carbon or carbonized fiber	CPCONLY	Y10T442/134		39
Y10T442/136	11	Including a foam layer	CPCONLY	Y10T442/136		23
Y10T442/138	11	Including a metal layer	CPCONLY	Y10T442/138		25
Y10T442/14	11	Including an additional scrim layer	CPCONLY	Y10T442/14		28
Y10T442/141	11	Including a woven fabric which is not a scrim	CPCONLY	Y10T442/141		11
Y10T442/143	11	Including a nonwoven fabric which is not a scrim	CPCONLY	Y10T442/143		35
Y10T442/145	11	Including a preformed film, foil, or sheet	CPCONLY	Y10T442/145		28
Y10T442/147	11	Including a mica layer	CPCONLY	Y10T442/147		4
Y10T442/148	11	Including a coating or impregnation containing particulate material other than fiber	CPCONLY	Y10T442/148		31
Y10T442/15	10	Including a foam layer	CPCONLY	Y10T442/15		97
Y10T442/152	10	Including a free metal or alloy constituent	CPCONLY	Y10T442/152		51
Y10T442/153	10	Including an additional scrim layer	CPCONLY	Y10T442/153		86
Y10T442/155	10	Including a paper layer	CPCONLY	Y10T442/155		42
Y10T442/157	11	Two or more paper layers	CPCONLY	Y10T442/157		20
Y10T442/159	10	Including a nonwoven fabric which is not a scrim	CPCONLY	Y10T442/159		224
Y10T442/16	11	Two or more nonwoven layers	CPCONLY	Y10T442/16		98
Y10T442/162	10	Including a natural or synthetic rubber layer	CPCONLY	Y10T442/162		57
Y10T442/164	10	Including a preformed film, foil, or sheet	CPCONLY	Y10T442/164		197
Y10T442/166	11	Cellulose acetate film or sheet	CPCONLY	Y10T442/166		6
Y10T442/167	11	Fluorinated polyolefin film or sheet	CPCONLY	Y10T442/167		27
Y10T442/169	11	Polyolefin film or sheet	CPCONLY	Y10T442/169		70
Y10T442/171	10	Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T442/171		64
Y10T442/172	10	Coated or impregnated	CPCONLY	Y10T442/172		321
Y10T442/174	11	Including particulate material other than fiber in coating or impregnation	CPCONLY	Y10T442/174		90
Y10T442/176	11	Three or more layers	CPCONLY	Y10T442/176		122
Y10T442/178	11	Synthetic polymeric fiber	CPCONLY	Y10T442/178		108
Y10T442/179	12	Nylon fiber	CPCONLY	Y10T442/179		28
Y10T442/181	11	Bitumen coating or impregnation	CPCONLY	Y10T442/181		33
Y10T442/183	10	Synthetic polymeric fiber	CPCONLY	Y10T442/183		173
Y10T442/184	9	Nonwoven scrim	CPCONLY	Y10T442/184		220
Y10T442/186	10	Comprising a composite fiber	CPCONLY	Y10T442/186		43
Y10T442/188	10	Metal or metal-coated fiber-containing scrim	CPCONLY	Y10T442/188		61
Y10T442/19	11	Including a paper layer	CPCONLY	Y10T442/19		4
Y10T442/191	10	Inorganic fiber-containing scrim	CPCONLY	Y10T442/191		64
Y10T442/193	11	Including a foam layer	CPCONLY	Y10T442/193		20
Y10T442/195	10	Including a foam layer	CPCONLY	Y10T442/195		55
Y10T442/197	10	Including a nonwoven fabric which is not a scrim	CPCONLY	Y10T442/197		107
Y10T442/198	10	Coated or impregnated	CPCONLY	Y10T442/198		217
Y10T442/20	8	Coated or impregnated woven, knit, or nonwoven fabric which is not [a] associated with another preformed layer or fiber layer or, [b] with respect to woven and knit, characterized, respectively, by a particular or differential weave or knit, wherein the coating or impregnation is neither a foamed material nor a free metal or alloy layer	CPCONLY	Y10T442/20		1398
Y10T442/2008	9	Fabric composed of a fiber or strand which is of specific structural definition	CPCONLY	Y10T442/2008		319
Y10T442/2016	9	Impregnation is confined to a plane disposed between both major fabric surfaces which are essentially free of impregnating material	CPCONLY	Y10T442/2016		42
Y10T442/2025	9	Coating produced by extrusion	CPCONLY	Y10T442/2025		125
Y10T442/2033	9	Coating or impregnation formed in situ [e.g., by interfacial condensation, coagulation, precipitation, etc.]	CPCONLY	Y10T442/2033		220
Y10T442/2041	9	Two or more non-extruded coatings or impregnations	CPCONLY	Y10T442/2041		169
Y10T442/2049	10	Each major face of the fabric has at least one coating or impregnation	CPCONLY	Y10T442/2049		186
Y10T442/2057	11	At least two coatings or impregnations of different chemical composition	CPCONLY	Y10T442/2057		96
Y10T442/2066	12	Different coatings or impregnations on opposite faces of the fabric	CPCONLY	Y10T442/2066		138
Y10T442/2074	12	At least one coating or impregnation contains particulate material	CPCONLY	Y10T442/2074		105
Y10T442/2082	13	At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation	CPCONLY	Y10T442/2082		53
Y10T442/209	11	At least one coating or impregnation contains particulate material	CPCONLY	Y10T442/209		60
Y10T442/2098	10	At least two coatings or impregnations of different chemical composition	CPCONLY	Y10T442/2098		375
Y10T442/2107	11	At least one coating or impregnation contains particulate material	CPCONLY	Y10T442/2107		193
Y10T442/2115	12	At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation	CPCONLY	Y10T442/2115		94
Y10T442/2123	10	At least one coating or impregnation contains particulate material	CPCONLY	Y10T442/2123		100
Y10T442/2131	11	At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation	CPCONLY	Y10T442/2131		39
Y10T442/2139	9	Coating or impregnation specified as porous or permeable to a specific substance [e.g., water vapor, air, etc.]	CPCONLY	Y10T442/2139		522
Y10T442/2148	10	Coating or impregnation is specified as microporous but is not a foam	CPCONLY	Y10T442/2148		127
Y10T442/2156	9	Coating or impregnation collects radionuclide or heavy metal	CPCONLY	Y10T442/2156		5
Y10T442/2164	9	Coating or impregnation specified as water repellent	CPCONLY	Y10T442/2164		295
Y10T442/2172	10	Also specified as oil repellent	CPCONLY	Y10T442/2172		185
Y10T442/218	10	Organosilicon containing	CPCONLY	Y10T442/218		103
Y10T442/2189	10	Fluorocarbon containing	CPCONLY	Y10T442/2189		158
Y10T442/2197	10	Nitrogen containing	CPCONLY	Y10T442/2197		90
Y10T442/2205	10	Natural oil or wax containing	CPCONLY	Y10T442/2205		42
Y10T442/2213	9	Coating or impregnation is specified as weather proof, water vapor resistant, or moisture resistant	CPCONLY	Y10T442/2213		344
Y10T442/2221	9	Coating or impregnation is specified as water proof	CPCONLY	Y10T442/2221		363
Y10T442/223	10	Organosilicon containing	CPCONLY	Y10T442/223		45
Y10T442/2238	10	Fluorocarbon containing	CPCONLY	Y10T442/2238		79
Y10T442/2246	10	Nitrogen containing	CPCONLY	Y10T442/2246		98
Y10T442/2254	10	Natural oil or wax containing	CPCONLY	Y10T442/2254		109
Y10T442/2262	9	Coating or impregnation is oil repellent but not oil or stain release	CPCONLY	Y10T442/2262		65
Y10T442/227	10	Fluorocarbon containing	CPCONLY	Y10T442/227		56
Y10T442/2279	9	Coating or impregnation improves soil repellency, soil release, or anti- soil redeposition qualities of fabric	CPCONLY	Y10T442/2279		260
Y10T442/2287	10	Fluorocarbon containing	CPCONLY	Y10T442/2287		115
Y10T442/2295	10	Linear polyether group chain containing	CPCONLY	Y10T442/2295		25
Y10T442/2303	9	Coating or impregnation provides a fragrance or releases an odor intended to be perceptible to humans	CPCONLY	Y10T442/2303		79
Y10T442/2311	9	Coating or impregnation is a lubricant or a surface friction reducing agent other than specified as improving the "hand" of the fabric or increasing the softness thereof	CPCONLY	Y10T442/2311		152
Y10T442/232	10	Fluorocarbon containing	CPCONLY	Y10T442/232		32
Y10T442/2328	10	Organosilicon containing	CPCONLY	Y10T442/2328		62
Y10T442/2336	10	Natural oil or wax containing	CPCONLY	Y10T442/2336		45
Y10T442/2344	9	Coating or impregnation is anti-slip or friction-increasing other than specified as an abrasive	CPCONLY	Y10T442/2344		202
Y10T442/2352	9	Coating or impregnation functions to soften the feel of or improve the "hand" of the fabric	CPCONLY	Y10T442/2352		336
Y10T442/2361	9	Coating or impregnation improves stiffness of the fabric other than specified as a size	CPCONLY	Y10T442/2361		216
Y10T442/2369	9	Coating or impregnation improves elasticity, bendability, resiliency, flexibility, or shape retention of the fabric	CPCONLY	Y10T442/2369		368
Y10T442/2377	10	Improves elasticity	CPCONLY	Y10T442/2377		112
Y10T442/2385	10	Improves shrink resistance	CPCONLY	Y10T442/2385		96
Y10T442/2393	10	Coating or impregnation provides crease-resistance or wash and wear characteristics	CPCONLY	Y10T442/2393		202
Y10T442/2402	9	Coating or impregnation specified as a size	CPCONLY	Y10T442/2402		186
Y10T442/241	9	Coating or impregnation improves snag or pull resistance of the fabric	CPCONLY	Y10T442/241		41
Y10T442/2418	9	Coating or impregnation increases electrical conductivity or anti-static quality	CPCONLY	Y10T442/2418		204
Y10T442/2426	10	Elemental carbon containing	CPCONLY	Y10T442/2426		55
Y10T442/2434	10	Linear polyether group chain containing	CPCONLY	Y10T442/2434		40
Y10T442/2443	10	Nitrogen and phosphorus containing	CPCONLY	Y10T442/2443		15
Y10T442/2451	10	Phosphorus containing	CPCONLY	Y10T442/2451		24
Y10T442/2459	10	Nitrogen containing	CPCONLY	Y10T442/2459		106
Y10T442/2467	10	Sulphur containing	CPCONLY	Y10T442/2467		24
Y10T442/2475	9	Coating or impregnation is electrical insulation-providing, -improving, or -increasing, or conductivity-reducing	CPCONLY	Y10T442/2475		213
Y10T442/2484	9	Coating or impregnation is water absorbency-increasing or hydrophilicity-increasing or hydrophilicity-imparting	CPCONLY	Y10T442/2484		372
Y10T442/2492	10	Polyether group containing	CPCONLY	Y10T442/2492		50
Y10T442/25	9	Coating or impregnation absorbs sound	CPCONLY	Y10T442/25		48
Y10T442/2508	9	Coating or impregnation absorbs chemical material other than water	CPCONLY	Y10T442/2508		167
Y10T442/2516	10	Chemical material is one used in biological or chemical warfare	CPCONLY	Y10T442/2516		39
Y10T442/2525	9	Coating or impregnation functions biologically [e.g., insect repellent, antiseptic, insecticide, bactericide, etc.]	CPCONLY	Y10T442/2525		819
Y10T442/2533	10	Inhibits mildew	CPCONLY	Y10T442/2533		94
Y10T442/2541	10	Insect repellent	CPCONLY	Y10T442/2541		80
Y10T442/2549	9	Coating or impregnation is chemically inert or of stated nonreactance	CPCONLY	Y10T442/2549		82
Y10T442/2557	10	Oxygen or ozone resistant	CPCONLY	Y10T442/2557		29
Y10T442/2566	10	Organic solvent resistant [e.g., dry cleaning fluid, etc.]	CPCONLY	Y10T442/2566		107
Y10T442/2574	10	Acid or alkali resistant	CPCONLY	Y10T442/2574		56
Y10T442/2582	9	Coating or impregnation contains an optical bleach or brightener or functions as an optical bleach or brightener [e.g., it masks fabric yellowing, etc.]	CPCONLY	Y10T442/2582		57
Y10T442/259	9	Coating or impregnation provides protection from radiation [e.g., U.V., visible light, I.R., micscheme-change-itemave, high energy particle, etc.] or heat retention thru radiation absorption	CPCONLY	Y10T442/259		212
Y10T442/2598	10	Radiation reflective	CPCONLY	Y10T442/2598		97
Y10T442/2607	10	Radiation absorptive	CPCONLY	Y10T442/2607		68
Y10T442/2615	9	Coating or impregnation is resistant to penetration by solid implements	CPCONLY	Y10T442/2615		170
Y10T442/2623	10	Ballistic resistant	CPCONLY	Y10T442/2623		186
Y10T442/2631	9	Coating or impregnation provides heat or fire protection	CPCONLY	Y10T442/2631		558
Y10T442/2639	10	Coated or impregnated asbestos fabric	CPCONLY	Y10T442/2639		32
Y10T442/2648	10	Coating or impregnation is specified as an intumescent material	CPCONLY	Y10T442/2648		62
Y10T442/2656	10	Antimony containing	CPCONLY	Y10T442/2656		63
Y10T442/2664	10	Boron containing	CPCONLY	Y10T442/2664		47
Y10T442/2672	10	Phosphorus containing	CPCONLY	Y10T442/2672		121
Y10T442/268	11	Phosphorus and nitrogen containing compound	CPCONLY	Y10T442/268		174
Y10T442/2689	11	A phosphorus containing compound and a nitrogen containing compound	CPCONLY	Y10T442/2689		62
Y10T442/2697	11	Phosphorus and halogen containing compound	CPCONLY	Y10T442/2697		46
Y10T442/2705	11	A phosphorus containing compound and a halogen containing compound	CPCONLY	Y10T442/2705		17
Y10T442/2713	10	Halogen containing	CPCONLY	Y10T442/2713		128
Y10T442/2721	10	Nitrogen containing	CPCONLY	Y10T442/2721		129
Y10T442/273	9	Coating or impregnation provides wear or abrasion resistance	CPCONLY	Y10T442/273		373
Y10T442/2738	9	Coating or impregnation intended to function as an adhesive to solid surfaces subsequently associated therewith	CPCONLY	Y10T442/2738		770
Y10T442/2746	10	Heat-activatable adhesive	CPCONLY	Y10T442/2746		204
Y10T442/2754	10	Pressure-sensitive adhesive	CPCONLY	Y10T442/2754		290
Y10T442/2762	9	Coated or impregnated natural fiber fabric [e.g., cotton, wool, silk, linen, etc.]	CPCONLY	Y10T442/2762		357
Y10T442/277	10	Coated or impregnated cellulosic fiber fabric	CPCONLY	Y10T442/277		327
Y10T442/2779	11	Coating or impregnation contains an acrylic polymer or copolymer [e.g., polyacrylonitrile, polyacrylic acid, etc.]	CPCONLY	Y10T442/2779		90
Y10T442/2787	11	Coating or impregnation contains a vinyl polymer or copolymer	CPCONLY	Y10T442/2787		92
Y10T442/2795	11	Coating or impregnation contains an epoxy polymer or copolymer or polyether	CPCONLY	Y10T442/2795		23
Y10T442/2803	11	Polymeric coating or impregnation from a silane or siloxane not specified as lubricant or water repellent	CPCONLY	Y10T442/2803		53
Y10T442/2811	11	Coating or impregnation contains polyimide or polyamide	CPCONLY	Y10T442/2811		35
Y10T442/282	11	Coating or impregnation contains natural gum, rosin, natural oil, or wax	CPCONLY	Y10T442/282		39
Y10T442/2828	11	Coating or impregnation contains aldehyde or ketone condensation product	CPCONLY	Y10T442/2828		36
Y10T442/2836	12	Phenol-aldehyde condensate	CPCONLY	Y10T442/2836		29
Y10T442/2844	12	Melamine-aldehyde condensate	CPCONLY	Y10T442/2844		21
Y10T442/2852	12	Amide-aldehyde condensate [e.g., modified urea-aldehyde condensate, etc.]	CPCONLY	Y10T442/2852		27
Y10T442/2861	9	Coated or impregnated synthetic organic fiber fabric	CPCONLY	Y10T442/2861		732
Y10T442/2869	10	Coated or impregnated regenerated cellulose fiber fabric	CPCONLY	Y10T442/2869		142
Y10T442/2877	10	Coated or impregnated polyvinyl alcohol fiber fabric	CPCONLY	Y10T442/2877		34
Y10T442/2885	10	Coated or impregnated acrylic fiber fabric	CPCONLY	Y10T442/2885		103
Y10T442/2893	10	Coated or impregnated polyamide fiber fabric	CPCONLY	Y10T442/2893		334
Y10T442/2902	11	Aromatic polyamide fiber fabric	CPCONLY	Y10T442/2902		165
Y10T442/291	10	Coated or impregnated polyolefin fiber fabric	CPCONLY	Y10T442/291		195
Y10T442/2918	11	Polypropylene fiber fabric	CPCONLY	Y10T442/2918		149
Y10T442/2926	9	Coated or impregnated inorganic fiber fabric	CPCONLY	Y10T442/2926		255
Y10T442/2934	10	Coating or impregnation contains vinyl polymer or copolymer	CPCONLY	Y10T442/2934		89
Y10T442/2943	11	Vinyl acetate polymer or copolymer	CPCONLY	Y10T442/2943		23
Y10T442/2951	10	Coating or impregnation contains epoxy polymer or copolymer or polyether	CPCONLY	Y10T442/2951		123
Y10T442/2959	10	Coating or impregnation contains aldehyde or ketone condensation product	CPCONLY	Y10T442/2959		48
Y10T442/2967	11	Amide-aldehyde condensate	CPCONLY	Y10T442/2967		8
Y10T442/2975	10	Coated or impregnated ceramic fiber fabric	CPCONLY	Y10T442/2975		98
Y10T442/2984	10	Coated or impregnated carbon or carbonaceous fiber fabric	CPCONLY	Y10T442/2984		234
Y10T442/2992	10	Coated or impregnated glass fiber fabric	CPCONLY	Y10T442/2992		729
Y10T442/30	8	Woven fabric [i.e., woven strand or strip material]	CPCONLY	Y10T442/30		839
Y10T442/3008	9	Woven fabric has an elastic quality	CPCONLY	Y10T442/3008		145
Y10T442/3016	10	Including a preformed layer other than the elastic woven fabric [e.g., fabric or film or foil or sheet layer, etc.]	CPCONLY	Y10T442/3016		94
Y10T442/3024	10	Including elastic strand or strip	CPCONLY	Y10T442/3024		131
Y10T442/3033	9	Including a strip or ribbon	CPCONLY	Y10T442/3033		105
Y10T442/3041	10	Woven fabric comprises strips or ribbons only	CPCONLY	Y10T442/3041		120
Y10T442/3049	9	Including strand precoated with other than free metal or alloy	CPCONLY	Y10T442/3049		216
Y10T442/3057	10	Multiple coatings	CPCONLY	Y10T442/3057		29
Y10T442/3065	9	Including strand which is of specific structural definition	CPCONLY	Y10T442/3065		446
Y10T442/3073	10	Strand material is core-spun [not sheath-core bicomponent strand]	CPCONLY	Y10T442/3073		69
Y10T442/3081	11	Core is synthetic polymeric material	CPCONLY	Y10T442/3081		45
Y10T442/3089	10	Cross-sectional configuration of strand material is specified	CPCONLY	Y10T442/3089		84
Y10T442/3098	11	Cross-sectional configuration varies longitudinaly along the strand	CPCONLY	Y10T442/3098		30
Y10T442/3106	11	Hollow strand material	CPCONLY	Y10T442/3106		46
Y10T442/3114	11	Cross-sectional configuration of the strand material is other than circular	CPCONLY	Y10T442/3114		101
Y10T442/3122	12	Cross-sectional configuration is multi-lobal	CPCONLY	Y10T442/3122		36
Y10T442/313	10	Strand material formed of individual filaments having different chemical compositions	CPCONLY	Y10T442/313		121
Y10T442/3138	11	Including inorganic filament	CPCONLY	Y10T442/3138		56
Y10T442/3146	9	Strand material is composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material	CPCONLY	Y10T442/3146		227
Y10T442/3154	10	Sheath-core multicomponent strand material	CPCONLY	Y10T442/3154		111
Y10T442/3163	10	Islands-in-sea multicomponent strand material	CPCONLY	Y10T442/3163		33
Y10T442/3171	10	Strand material is a blend of polymeric material and a filler material	CPCONLY	Y10T442/3171		47
Y10T442/3179	9	Woven fabric is characterized by a particular or differential weave other than fabric in which the strand denier or warp/weft pick count is specified	CPCONLY	Y10T442/3179		408
Y10T442/3187	10	Triaxially woven fabric	CPCONLY	Y10T442/3187		46
Y10T442/3195	10	Three-dimensional weave [e.g., x-y-z planes, multi-planar warps and/or wefts, etc.]	CPCONLY	Y10T442/3195		213
Y10T442/3203	11	Multi-planar warp layers	CPCONLY	Y10T442/3203		108
Y10T442/3211	11	Multi-planar weft layers	CPCONLY	Y10T442/3211		78
Y10T442/322	10	Warp differs from weft	CPCONLY	Y10T442/322		270
Y10T442/3228	11	Materials differ	CPCONLY	Y10T442/3228		133
Y10T442/3236	12	Including inorganic strand material	CPCONLY	Y10T442/3236		59
Y10T442/3244	13	Including natural strand material [e.g., cotton, wool, etc.]	CPCONLY	Y10T442/3244		34
Y10T442/3252	13	Including synthetic polymeric strand material	CPCONLY	Y10T442/3252		82
Y10T442/326	12	Including synthetic polymeric strand material	CPCONLY	Y10T442/326		77
Y10T442/3268	13	Including natural strand material	CPCONLY	Y10T442/3268		68
Y10T442/3276	13	Including polyamide strand material	CPCONLY	Y10T442/3276		54
Y10T442/3285	13	Including polyester strand material	CPCONLY	Y10T442/3285		61
Y10T442/3293	10	Warp and weft are identical and contain at least two chemically different strand materials	CPCONLY	Y10T442/3293		70
Y10T442/3301	10	Coated, impregnated, or autogenous bonded	CPCONLY	Y10T442/3301		135
Y10T442/3309	11	Woven fabric contains inorganic strand material	CPCONLY	Y10T442/3309		62
Y10T442/3317	11	Woven fabric contains synthetic polymeric strand material	CPCONLY	Y10T442/3317		96
Y10T442/3325	9	Including a foamed layer or component	CPCONLY	Y10T442/3325		221
Y10T442/3333	10	Including a free metal or alloy constituent	CPCONLY	Y10T442/3333		42
Y10T442/3341	10	Plural foam layers	CPCONLY	Y10T442/3341		56
Y10T442/335	10	Plural fabric layers	CPCONLY	Y10T442/335		119
Y10T442/3358	11	Including a nonwoven fabric layer	CPCONLY	Y10T442/3358		59
Y10T442/3366	10	Woven fabric is coated, impregnated, or autogenously bonded	CPCONLY	Y10T442/3366		142
Y10T442/3374	11	Coating or impregnation includes particulate material other than fiber	CPCONLY	Y10T442/3374		51
Y10T442/3382	9	Including a free metal or alloy constituent	CPCONLY	Y10T442/3382		143
Y10T442/339	10	Metal or metal-coated strand	CPCONLY	Y10T442/339		175
Y10T442/3398	10	Vapor or sputter deposited metal layer	CPCONLY	Y10T442/3398		48
Y10T442/3407	10	Chemically deposited metal layer [e.g., chemical precipitation or electrochemical deposition or plating, etc.]	CPCONLY	Y10T442/3407		54
Y10T442/3415	10	Preformed metallic film or foil or sheet [film or foil or sheet had structural integrity prior to association with the woven fabric]	CPCONLY	Y10T442/3415		170
Y10T442/3423	11	Plural metallic films or foils or sheets	CPCONLY	Y10T442/3423		65
Y10T442/3431	11	Plural fabric layers	CPCONLY	Y10T442/3431		85
Y10T442/3439	12	Including a nonwoven fabric layer	CPCONLY	Y10T442/3439		39
Y10T442/3447	11	Including a preformed synthetic polymeric film or sheet [i.e., film or sheet having structural integrity prior to association with the woven fabric]	CPCONLY	Y10T442/3447		54
Y10T442/3455	11	Including particulate material other than fiber	CPCONLY	Y10T442/3455		28
Y10T442/3463	10	Plural fabric layers	CPCONLY	Y10T442/3463		40
Y10T442/3472	9	Woven fabric including an additional woven fabric layer	CPCONLY	Y10T442/3472		306
Y10T442/348	10	Mechanically needled or hydroentangled	CPCONLY	Y10T442/348		53
Y10T442/3488	11	Four or more layers	CPCONLY	Y10T442/3488		27
Y10T442/3496	11	Coated, impregnated, or autogenously bonded	CPCONLY	Y10T442/3496		45
Y10T442/3504	10	Woven fabric layers comprise chemically different strand material	CPCONLY	Y10T442/3504		68
Y10T442/3512	11	Three or more fabric layers	CPCONLY	Y10T442/3512		70
Y10T442/352	12	One of which is a nonwoven fabric layer	CPCONLY	Y10T442/352		27
Y10T442/3528	10	Three or more fabric layers	CPCONLY	Y10T442/3528		182
Y10T442/3537	11	One of which is a nonwoven fabric layer	CPCONLY	Y10T442/3537		99
Y10T442/3545	11	Woven fabric layers impregnated with a blend of thermosetting and thermoplastic resins	CPCONLY	Y10T442/3545		18
Y10T442/3553	11	Woven fabric layers impregnated with an organosilicon resin	CPCONLY	Y10T442/3553		19
Y10T442/3561	11	Woven fabric layers impregnated with a natural or synthetic rubber	CPCONLY	Y10T442/3561		29
Y10T442/3569	11	Woven fabric layers impregnated with a thermosetting resin	CPCONLY	Y10T442/3569		83
Y10T442/3577	12	Phenolic resin	CPCONLY	Y10T442/3577		46
Y10T442/3585	12	Epoxy resin	CPCONLY	Y10T442/3585		58
Y10T442/3594	11	Woven fabric layers impregnated with a thermoplastic resin [e.g., vinyl polymer, etc.]	CPCONLY	Y10T442/3594		74
Y10T442/3602	10	Three or more distinct layers	CPCONLY	Y10T442/3602		85
Y10T442/361	11	At least one layer is derived from water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T442/361		22
Y10T442/3618	11	At least one layer contains wood or cork	CPCONLY	Y10T442/3618		24
Y10T442/3626	11	At least one layer contains bituminous material [e.g., tar, pitch, asphalt, etc.]	CPCONLY	Y10T442/3626		13
Y10T442/3634	11	At least one layer comprises paper	CPCONLY	Y10T442/3634		22
Y10T442/3642	11	At least one layer contains natural or synthetic rubber	CPCONLY	Y10T442/3642		63
Y10T442/365	11	At least one layer is a preformed synthetic polymeric film or sheet	CPCONLY	Y10T442/365		94
Y10T442/3659	11	At least one layer comprises ceramic or glass material in other than particulate form	CPCONLY	Y10T442/3659		20
Y10T442/3667	11	Composite consisting of at least two woven fabrics bonded by an interposed adhesive layer [but not two woven fabrics bonded together by an impregnation which penetrates through the thickness of at least one of the woven fabric layers]	CPCONLY	Y10T442/3667		113
Y10T442/3675	12	Fabric layer contains natural strand material	CPCONLY	Y10T442/3675		30
Y10T442/3683	12	Fabric layer contains carbon or carbonaceous strand material	CPCONLY	Y10T442/3683		20
Y10T442/3691	12	Fabric layer contains glass strand material	CPCONLY	Y10T442/3691		32
Y10T442/3699	11	Including particulate material other than fiber	CPCONLY	Y10T442/3699		34
Y10T442/3707	9	Woven fabric including a nonwoven fabric layer other than paper	CPCONLY	Y10T442/3707		276
Y10T442/3715	10	Nonwoven fabric layer comprises parallel arrays of strand material	CPCONLY	Y10T442/3715		45
Y10T442/3724	10	Needled	CPCONLY	Y10T442/3724		141
Y10T442/3732	11	Including an additional nonwoven fabric	CPCONLY	Y10T442/3732		72
Y10T442/374	12	Additional nonwoven fabric comprises chemically different strand material than the first nonwoven fabric	CPCONLY	Y10T442/374		17
Y10T442/3748	12	Including inorganic strand material	CPCONLY	Y10T442/3748		9
Y10T442/3756	11	Nonwoven fabric layer comprises at least two chemically different fibers	CPCONLY	Y10T442/3756		23
Y10T442/3764	11	Coated, impregnated, or autogenously bonded	CPCONLY	Y10T442/3764		55
Y10T442/3772	10	Hydroentangled	CPCONLY	Y10T442/3772		19
Y10T442/378	10	Coated, impregnated, or autogenously bonded	CPCONLY	Y10T442/378		75
Y10T442/3789	11	Plural nonwoven fabric layers	CPCONLY	Y10T442/3789		38
Y10T442/3797	11	Coating or impregnation is derived from a water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T442/3797		15
Y10T442/3805	11	Coating or impregnation contains natural or synthetic rubber	CPCONLY	Y10T442/3805		29
Y10T442/3813	11	Coating or impregnation contains synthetic polymeric material	CPCONLY	Y10T442/3813		121
Y10T442/3821	11	Coating or impregnation contains bituminous material	CPCONLY	Y10T442/3821		19
Y10T442/3829	11	Four or more layers	CPCONLY	Y10T442/3829		26
Y10T442/3837	12	Including particulate material other than fiber	CPCONLY	Y10T442/3837		13
Y10T442/3846	11	Including particulate material other than fiber	CPCONLY	Y10T442/3846		23
Y10T442/3854	9	Woven fabric with a preformed polymeric film or sheet	CPCONLY	Y10T442/3854		436
Y10T442/3862	10	Ester condensation polymer sheet or film [e.g., polyethylene terephthalate, etc.]	CPCONLY	Y10T442/3862		87
Y10T442/387	10	Vinyl polymer or copolymer sheet or film [e.g., polyvinyl chloride, polyvinylidene chloride, polyvinyl acetate, etc.]	CPCONLY	Y10T442/387		110
Y10T442/3878	10	Fluorinated olefin polymer or copolymer sheet or film [e.g., Teflon@, etc.]	CPCONLY	Y10T442/3878		82
Y10T442/3886	10	Olefin polymer or copolymer sheet or film [e.g., polypropylene, polyethylene, ethylene-butylene copolymer, etc.]	CPCONLY	Y10T442/3886		155
Y10T442/3894	10	Amide condensation polymer sheet or film [e.g., nylon 6, etc.]	CPCONLY	Y10T442/3894		36
Y10T442/3902	10	Polyimide sheet or film	CPCONLY	Y10T442/3902		20
Y10T442/3911	10	Natural or synthetic rubber sheet or film	CPCONLY	Y10T442/3911		119
Y10T442/3919	10	Including particulate material other than fiber	CPCONLY	Y10T442/3919		48
Y10T442/3927	9	Including a paper or wood pulp layer	CPCONLY	Y10T442/3927		90
Y10T442/3935	10	Mica paper layer	CPCONLY	Y10T442/3935		18
Y10T442/3943	10	Plural paper or wood pulp layers	CPCONLY	Y10T442/3943		21
Y10T442/3951	10	Including a bituminous layer	CPCONLY	Y10T442/3951		12
Y10T442/3959	10	Including an outermost adhesive layer	CPCONLY	Y10T442/3959		11
Y10T442/3967	10	Including a natural or synthetic rubber layer	CPCONLY	Y10T442/3967		9
Y10T442/3976	9	Including strand which is stated to have specific attributes [e.g., heat or fire resistance, chemical or solvent resistance, high absorption for aqueous composition, water solubility, heat shrinkability, etc.]	CPCONLY	Y10T442/3976		438
Y10T442/3984	10	Strand is other than glass and is heat or fire resistant	CPCONLY	Y10T442/3984		128
Y10T442/3992	10	Strand is heat shrinkable	CPCONLY	Y10T442/3992		21
Y10T442/40	8	Knit fabric [i.e., knit strand or strip material]	CPCONLY	Y10T442/40		488
Y10T442/406	9	Including parallel strips	CPCONLY	Y10T442/406		37
Y10T442/413	9	Including an elastic strand	CPCONLY	Y10T442/413		144
Y10T442/419	9	Including strand precoated with other than free metal or alloy	CPCONLY	Y10T442/419		60
Y10T442/425	9	Including strand which is of specific structural definition	CPCONLY	Y10T442/425		157
Y10T442/431	10	Cross-sectional configuration of strand material is specified	CPCONLY	Y10T442/431		67
Y10T442/438	10	Strand material formed of individual filaments having different chemical compositions	CPCONLY	Y10T442/438		74
Y10T442/444	9	Strand is a monofilament composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material	CPCONLY	Y10T442/444		107
Y10T442/45	9	Knit fabric is characterized by a particular or differential knit pattern other than open knit fabric or a fabric in which the strand denier is specified	CPCONLY	Y10T442/45		179
Y10T442/456	10	Including additional strand inserted within knit fabric	CPCONLY	Y10T442/456		85
Y10T442/463	11	Warp knit insert strand	CPCONLY	Y10T442/463		84
Y10T442/469	9	Including a foamed layer or component	CPCONLY	Y10T442/469		125
Y10T442/475	9	Including a free metal or alloy constituent	CPCONLY	Y10T442/475		102
Y10T442/481	10	Chemically deposited metal layer [e.g., chemical precipitation or electrochemical deposition or plating, etc.]	CPCONLY	Y10T442/481		20
Y10T442/488	9	Including an additional knit fabric layer	CPCONLY	Y10T442/488		131
Y10T442/494	9	Including a nonwoven fabric layer other than paper	CPCONLY	Y10T442/494		182
Y10T442/50	8	FELT FABRIC	CPCONLY	Y10T442/50		214
Y10T442/51	9	From natural organic fiber [e.g., wool, etc.]	CPCONLY	Y10T442/51		81
Y10T442/53	10	Including particulate material other than fiber	CPCONLY	Y10T442/53		26
Y10T442/54	10	At least three layers	CPCONLY	Y10T442/54		69
Y10T442/56	9	From synthetic organic fiber	CPCONLY	Y10T442/56		142
Y10T442/57	9	Including particulate material other than fiber	CPCONLY	Y10T442/57		49
Y10T442/59	9	At least three layers	CPCONLY	Y10T442/59		201
Y10T442/60	8	Nonwoven fabric [i.e., nonwoven strand or fiber material]	CPCONLY	Y10T442/60		1409
Y10T442/601	9	Nonwoven fabric has an elastic quality	CPCONLY	Y10T442/601		361
Y10T442/602	10	Nonwoven fabric comprises an elastic strand or fiber material	CPCONLY	Y10T442/602		257
Y10T442/603	9	Including strand or fiber material precoated with other than free metal or alloy	CPCONLY	Y10T442/603		61
Y10T442/604	10	Strand or fiber material is glass	CPCONLY	Y10T442/604		94
Y10T442/605	10	Strand or fiber material is inorganic	CPCONLY	Y10T442/605		40
Y10T442/607	10	Strand or fiber material is synthetic polymer	CPCONLY	Y10T442/607		148
Y10T442/608	9	Including strand or fiber material which is of specific structural definition	CPCONLY	Y10T442/608		438
Y10T442/609	10	Cross-sectional configuration of strand or fiber material is specified	CPCONLY	Y10T442/609		160
Y10T442/61	11	Cross-sectional configuration varies longitudinally along strand or fiber material	CPCONLY	Y10T442/61		62
Y10T442/611	11	Cross-sectional configuration of strand or fiber material is other than circular	CPCONLY	Y10T442/611		126
Y10T442/612	11	Hollow strand or fiber material	CPCONLY	Y10T442/612		85
Y10T442/613	11	Microcellular strand or fiber material	CPCONLY	Y10T442/613		19
Y10T442/614	10	Strand or fiber material specified as having microdimensions [i.e., microfiber]	CPCONLY	Y10T442/614		355
Y10T442/615	11	Strand or fiber material is blended with another chemically different microfiber in the same layer	CPCONLY	Y10T442/615		106
Y10T442/616	12	Blend of synthetic polymeric and inorganic microfibers	CPCONLY	Y10T442/616		29
Y10T442/618	12	Blend of chemically different inorganic microfibers	CPCONLY	Y10T442/618		17
Y10T442/619	11	Including other strand or fiber material in the same layer not specified as having microdimensions	CPCONLY	Y10T442/619		114
Y10T442/62	11	Including another chemically different microfiber in a separate layer	CPCONLY	Y10T442/62		46
Y10T442/621	11	Including other strand or fiber material in a different layer not specified as having microdimensions	CPCONLY	Y10T442/621		98
Y10T442/622	11	Microfiber is a composite fiber	CPCONLY	Y10T442/622		79
Y10T442/623	11	Microfiber is glass	CPCONLY	Y10T442/623		63
Y10T442/624	11	Microfiber is carbon or carbonaceous	CPCONLY	Y10T442/624		29
Y10T442/625	11	Autogenously bonded	CPCONLY	Y10T442/625		62
Y10T442/626	11	Microfiber is synthetic polymer	CPCONLY	Y10T442/626		230
Y10T442/627	10	Strand or fiber material is specified as non-linear [e.g., crimped, coiled, etc.]	CPCONLY	Y10T442/627		180
Y10T442/629	11	Composite strand or fiber material	CPCONLY	Y10T442/629		81
Y10T442/63	11	Carbon or carbonaceous strand or fiber material	CPCONLY	Y10T442/63		32
Y10T442/631	11	Glass strand or fiber material	CPCONLY	Y10T442/631		31
Y10T442/632	11	A single nonwoven layer comprising non-linear synthetic polymeric strand or fiber material and strand or fiber material not specified as non-linear	CPCONLY	Y10T442/632		31
Y10T442/633	12	Synthetic polymeric strand or fiber material is of staple length	CPCONLY	Y10T442/633		40
Y10T442/634	11	A nonwoven fabric having a layer comprising non-linear synthetic polymeric strand or fiber material and a separate and distinct layer comprising strand or fiber material which is not specified as non-linear	CPCONLY	Y10T442/634		22
Y10T442/635	11	Synthetic polymeric strand or fiber material	CPCONLY	Y10T442/635		72
Y10T442/636	12	Synthetic polymeric strand or fiber material is of staple length	CPCONLY	Y10T442/636		40
Y10T442/637	9	Including strand or fiber material which is a monofilament composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material	CPCONLY	Y10T442/637		603
Y10T442/638	10	Side-by-side multicomponent strand or fiber material	CPCONLY	Y10T442/638		194
Y10T442/64	10	Islands-in-sea multicomponent strand or fiber material	CPCONLY	Y10T442/64		118
Y10T442/641	10	Sheath-core multicomponent strand or fiber material	CPCONLY	Y10T442/641		436
Y10T442/642	10	Strand or fiber material is a blend of polymeric material and a filler material	CPCONLY	Y10T442/642		92
Y10T442/643	9	Including parallel strand or fiber material within the nonwoven fabric	CPCONLY	Y10T442/643		224
Y10T442/644	10	Parallel strand or fiber material is glass	CPCONLY	Y10T442/644		71
Y10T442/645	10	Parallel strand or fiber material is inorganic [e.g., rock wool, mineral wool, etc.]	CPCONLY	Y10T442/645		34
Y10T442/646	10	Parallel strand or fiber material is naturally occurring [e.g., cotton, wool, etc.]	CPCONLY	Y10T442/646		33
Y10T442/647	9	Including a foamed layer or component	CPCONLY	Y10T442/647		359
Y10T442/648	10	Including a free metal or alloy constituent	CPCONLY	Y10T442/648		24
Y10T442/649	10	Plural foamed layers	CPCONLY	Y10T442/649		65
Y10T442/651	10	Plural fabric layers	CPCONLY	Y10T442/651		185
Y10T442/652	10	Nonwoven fabric is coated, impregnated, or autogenously bonded	CPCONLY	Y10T442/652		225
Y10T442/653	11	Including particulate material other than fiber	CPCONLY	Y10T442/653		57
Y10T442/654	9	Including a free metal or alloy constituent	CPCONLY	Y10T442/654		122
Y10T442/655	10	Metal or metal-coated strand or fiber material	CPCONLY	Y10T442/655		126
Y10T442/656	10	Preformed metallic film or foil or sheet [film or foil or sheet had structural integrity prior to association with the nonwoven fabric]	CPCONLY	Y10T442/656		262
Y10T442/657	10	Vapor, chemical, or spray deposited metal layer	CPCONLY	Y10T442/657		51
Y10T442/658	10	Particulate free metal or alloy constituent	CPCONLY	Y10T442/658		39
Y10T442/659	9	Including an additional nonwoven fabric	CPCONLY	Y10T442/659		969
Y10T442/66	10	Additional nonwoven fabric is a spun-bonded fabric	CPCONLY	Y10T442/66		380
Y10T442/662	11	Needled	CPCONLY	Y10T442/662		87
Y10T442/663	11	Hydroentangled	CPCONLY	Y10T442/663		78
Y10T442/664	10	Including a wood fiber containing layer	CPCONLY	Y10T442/664		99
Y10T442/665	10	Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.]	CPCONLY	Y10T442/665		56
Y10T442/666	10	Mechanically interengaged by needling or impingement of fluid [e.g., gas or liquid stream, etc.]	CPCONLY	Y10T442/666		136
Y10T442/667	11	Needled	CPCONLY	Y10T442/667		215
Y10T442/668	10	Separate nonwoven fabric layers comprise chemically different strand or fiber material	CPCONLY	Y10T442/668		367
Y10T442/669	11	At least one layer of inorganic strand or fiber material and at least one layer of synthetic polymeric strand or fiber material	CPCONLY	Y10T442/669		56
Y10T442/67	10	Multiple nonwoven fabric layers composed of the same inorganic strand or fiber material	CPCONLY	Y10T442/67		207
Y10T442/671	10	Multiple nonwoven fabric layers composed of the same polymeric strand or fiber material	CPCONLY	Y10T442/671		295
Y10T442/673	10	Including particulate material other than fiber	CPCONLY	Y10T442/673		139
Y10T442/674	9	Nonwoven fabric with a preformed polymeric film or sheet	CPCONLY	Y10T442/674		1041
Y10T442/675	10	Ester condensation polymer sheet or film [e.g., polyethylene terephthalate, etc.]	CPCONLY	Y10T442/675		156
Y10T442/676	10	Vinyl polymer or copolymer sheet or film [e.g., polyvinyl chloride, polyvinylidene chloride, polyvinyl acetate, etc.]	CPCONLY	Y10T442/676		157
Y10T442/677	10	Fluorinated olefin polymer or copolymer sheet or film [e.g., TeflonR, etc.]	CPCONLY	Y10T442/677		69
Y10T442/678	10	Olefin polymer or copolymer sheet or film [e.g., polypropylene, polyethylene, ethylene-butylene copolymer, etc.]	CPCONLY	Y10T442/678		392
Y10T442/679	10	Natural or synthetic rubber sheet or film	CPCONLY	Y10T442/679		149
Y10T442/68	9	Melt-blown nonwoven fabric	CPCONLY	Y10T442/68		535
Y10T442/681	9	Spun-bonded nonwoven fabric	CPCONLY	Y10T442/681		751
Y10T442/682	9	Needled nonwoven fabric	CPCONLY	Y10T442/682		347
Y10T442/684	10	Containing at least two chemically different strand or fiber materials	CPCONLY	Y10T442/684		80
Y10T442/685	11	Containing inorganic and polymeric strand or fiber materials	CPCONLY	Y10T442/685		19
Y10T442/686	11	Containing polymeric and natural strand or fiber materials	CPCONLY	Y10T442/686		47
Y10T442/687	11	Containing inorganic strand or fiber material	CPCONLY	Y10T442/687		29
Y10T442/688	11	Containing polymeric strand or fiber material	CPCONLY	Y10T442/688		80
Y10T442/689	9	Hydroentangled nonwoven fabric	CPCONLY	Y10T442/689		362
Y10T442/69	9	Autogenously bonded nonwoven fabric	CPCONLY	Y10T442/69		530
Y10T442/691	10	Inorganic strand or fiber material only	CPCONLY	Y10T442/691		35
Y10T442/692	10	Containing at least two chemically different strand or fiber materials	CPCONLY	Y10T442/692		225
Y10T442/693	9	Including a paper layer	CPCONLY	Y10T442/693		157
Y10T442/695	9	Including a wood containing layer	CPCONLY	Y10T442/695		114
Y10T442/696	9	Including strand or fiber material which is stated to have specific attributes [e.g., heat or fire resistance, chemical or solvent resistance, high absorption for aqueous compositions, water solubility, heat shrinkability, etc.]	CPCONLY	Y10T442/696		804
Y10T442/697	9	Containing at least two chemically different strand or fiber materials	CPCONLY	Y10T442/697		536
Y10T442/698	10	Containing polymeric and natural strand or fiber materials	CPCONLY	Y10T442/698		199
Y10T442/699	9	Including particulate material other than strand or fiber material	CPCONLY	Y10T442/699		567
Y10T464/00	7	Rotary shafts, gudgeons, housings, and flexible couplings for rotary shafts	CPCONLY	Y10T464/00		
Y10T483/00	7	Tool changing	CPCONLY	Y10T483/00		
Y10T483/10	8	Process	CPCONLY	Y10T483/10		300
Y10T483/11	8	with safety means	CPCONLY	Y10T483/11		34
Y10T483/115	9	Guard	CPCONLY	Y10T483/115		169
Y10T483/12	8	with means to regulate operation by means of replaceable information supply [e.g. , templet, tape, card, etc. ]	CPCONLY	Y10T483/12		73
Y10T483/123	9	Replaceable information comprising tool location	CPCONLY	Y10T483/123		38
Y10T483/127	10	including determining optimum tool access path	CPCONLY	Y10T483/127		13
Y10T483/13	8	with control means energized in response to activator stimulated by condition sensor	CPCONLY	Y10T483/13		119
Y10T483/132	9	Responsive to tool identifying information	CPCONLY	Y10T483/132		55
Y10T483/134	10	Identifying information on tool or tool holder	CPCONLY	Y10T483/134		83
Y10T483/136	9	Responsive to tool	CPCONLY	Y10T483/136		84
Y10T483/138	10	including means to monitor and control, i.e., adaptive machining	CPCONLY	Y10T483/138		39
Y10T483/14	8	with signal or indicator	CPCONLY	Y10T483/14		43
Y10T483/15	8	with means to condition or adjust tool or tool support	CPCONLY	Y10T483/15		108
Y10T483/16	8	with means to transfer work	CPCONLY	Y10T483/16		162
Y10T483/165	9	Plural machine tools, e.g., flexible manufacturing	CPCONLY	Y10T483/165		70
Y10T483/17	8	including machine tool or component	CPCONLY	Y10T483/17		189
Y10T483/1702	9	Rotating work machine tool [e.g., screw machine, lathe, etc.]	CPCONLY	Y10T483/1702		20
Y10T483/1705	10	Tool support comprises rotary spindle	CPCONLY	Y10T483/1705		100
Y10T483/1707	10	Tool having specific mounting or work treating feature	CPCONLY	Y10T483/1707		33
Y10T483/171	11	Workpiece holder [e.g., chuck or chuck jaw, collet, etc.]	CPCONLY	Y10T483/171		43
Y10T483/1712	11	Turning tool insert changer	CPCONLY	Y10T483/1712		10
Y10T483/1714	10	Tool changer between tool support and matrix	CPCONLY	Y10T483/1714		44
Y10T483/1717	11	Plural matrices	CPCONLY	Y10T483/1717		13
Y10T483/1719	11	Tool support comprises turret	CPCONLY	Y10T483/1719		28
Y10T483/1721	12	Linearly moveable tool changer	CPCONLY	Y10T483/1721		26
Y10T483/1724	11	Linearly moveable tool changer	CPCONLY	Y10T483/1724		22
Y10T483/1726	10	Direct tool exchange between tool support and matrix	CPCONLY	Y10T483/1726		37
Y10T483/1729	9	Reciprocating tool machine tool [e.g., broaching machine, shaping machine, etc.]	CPCONLY	Y10T483/1729		109
Y10T483/1731	10	including matrix	CPCONLY	Y10T483/1731		127
Y10T483/1733	9	Rotary spindle machine tool [e.g., milling machine, boring, machine, grinding machine, etc.]	CPCONLY	Y10T483/1733		78
Y10T483/1736	10	Tool having specific mounting or work treating feature	CPCONLY	Y10T483/1736		135
Y10T483/1738	11	Tool head	CPCONLY	Y10T483/1738		93
Y10T483/174	11	Abrading wheel	CPCONLY	Y10T483/174		80
Y10T483/1743	11	including means for angularly orienting tool and spindle	CPCONLY	Y10T483/1743		44
Y10T483/1745	12	Spindle angularly oriented to align with tool	CPCONLY	Y10T483/1745		29
Y10T483/1748	10	Tool changer between spindle and matrix	CPCONLY	Y10T483/1748		58
Y10T483/175	11	Plural matrices	CPCONLY	Y10T483/175		72
Y10T483/1752	11	including tool holder pivotable about axis	CPCONLY	Y10T483/1752		77
Y10T483/1755	12	Plural tool holders pivotable about common axis	CPCONLY	Y10T483/1755		121
Y10T483/1757	13	including intermediate tool changer	CPCONLY	Y10T483/1757		43
Y10T483/176	14	Intermediate tool changer includes tool holder pivotable about axis	CPCONLY	Y10T483/176		66
Y10T483/1762	13	Tool holders pivotable with respect to each other	CPCONLY	Y10T483/1762		21
Y10T483/1764	13	Tool holders pivotable about plural nonparallel axes	CPCONLY	Y10T483/1764		41
Y10T483/1767	13	Linearly movable tool holders	CPCONLY	Y10T483/1767		117
Y10T483/1769	14	Extensible tool holders	CPCONLY	Y10T483/1769		20
Y10T483/1771	14	Translatable axis	CPCONLY	Y10T483/1771		61
Y10T483/1774	12	Distinct tool changer for each tool	CPCONLY	Y10T483/1774		26
Y10T483/1776	12	including intermediate tool changer	CPCONLY	Y10T483/1776		40
Y10T483/1779	12	Linearly movable tool holder	CPCONLY	Y10T483/1779		78
Y10T483/1781	12	Tool holder pivotable about plural nonparallel axes	CPCONLY	Y10T483/1781		33
Y10T483/1783	11	including linearly translatable tool changer [e.g., shuttle, ram, etc.]	CPCONLY	Y10T483/1783		95
Y10T483/1786	12	Plural tool holders	CPCONLY	Y10T483/1786		39
Y10T483/1788	12	Orthogonally translatable	CPCONLY	Y10T483/1788		52
Y10T483/179	10	Direct tool exchange between spindle and matrix	CPCONLY	Y10T483/179		107
Y10T483/1793	11	Spindle comprises tool changer	CPCONLY	Y10T483/1793		112
Y10T483/1795	12	Matrix indexes selected tool to transfer position	CPCONLY	Y10T483/1795		200
Y10T483/1798	11	including means to project tool from matrix	CPCONLY	Y10T483/1798		50
Y10T483/18	8	Tool transfer to or from matrix	CPCONLY	Y10T483/18		90
Y10T483/1809	9	Matrix including means to latch tool	CPCONLY	Y10T483/1809		161
Y10T483/1818	9	Matrix including means to project tool for transfer	CPCONLY	Y10T483/1818		34
Y10T483/1827	10	Rectilinear	CPCONLY	Y10T483/1827		84
Y10T483/1836	10	Pivoting	CPCONLY	Y10T483/1836		65
Y10T483/1845	9	Plural matrices	CPCONLY	Y10T483/1845		95
Y10T483/1855	10	including tool replenishing	CPCONLY	Y10T483/1855		57
Y10T483/1864	9	including tool pot or adapter	CPCONLY	Y10T483/1864		70
Y10T483/1873	9	Indexing matrix	CPCONLY	Y10T483/1873		76
Y10T483/1882	10	Rotary disc	CPCONLY	Y10T483/1882		157
Y10T483/1891	10	Chain or belt	CPCONLY	Y10T483/1891		143
Y10T483/19	8	Miscellaneous	CPCONLY	Y10T483/19		51
