B23B   1/00  \	0	0	3C045	B23B   1/00	8	ޤܼŪﵡλѤɬפȤùΤˡΤ褦ˡ˴Ϣ֤λ	Methods for turning or working essentially requiring the use of turning-machines; Use of auxiliary equipment in connection with such methods
B23B   1/00  A	0	0	3C045	B23B   1/00	256	ưںˤ	using vibration cutting
B23B   1/00  B	0	1	3C045	B23B   1/00	163	Ķȡ̹ȡͿưѤ	using ultrasonic (high-frequency) vibration
B23B   1/00  C	0	2	3C045	B23B   1/00	175	Τ	Device therefor
B23B   1/00  D	0	1	3C045	B23B   1/00	189	ĶȰʳοưѤ	using vibration other than ultrasonic vibration
B23B   1/00  G	0	0	3C045	B23B   1/00	106	ں̤ǮޤѤʤں魯	Cutting while the cut part being heated or cooled
B23B   1/00  N	0	0	3C045	B23B   1/00	339	ΥץħΤ	characterized by the numerical control process
B23B   1/00  Z	0	0	3C045	B23B   1/00	873	¾	Others
B23B   3/00  \	0	0	3C045	B23B   3/00	78	Ūﵡޤ֡㡥꼴ӿƤͤסﵡȹ礻	General-purpose turning-machines or devices, e.g. centre lathes with feed rod and lead screw; Sets of turning-machines
B23B   3/02  \	1	1	3C045	B23B   3/02	12	ס㡥ѡä˻Ѥ߷פ줿Σǣģ	Small lathes, e.g. for toolmakers (specially designed for watchmakers G04D 3/00)
B23B   3/04  \	1	1	3C045	B23B   3/04	1	ʪ缴椫龯Υ줿֤μʤˤžﵡ	Turning-machines in which the workpiece is rotated by means at a distance from the headstock
B23B   3/06  \	1	1	3C045	B23B   3/06	202	˥åȤ̤֤ΤߤħΤﵡޤ֡ʣ£ѣͥ表̤˱ѤǤ뤽Τ褦ħ£ѡˡΣ	Turning-machines or devices characterised only by the special arrangement of constructional units (B23Q 37/00 takes precedence; such features of general applicability B23Q) [2006.01]
B23B   3/08  \	1	1	3C045	B23B   3/08	10	ĤλѤħﵡ	Turning-machines characterised by the use of faceplates
B23B   3/10  \	2	2	3C045	B23B   3/10	83	ĤʿˤĤΡʤΩ	with the faceplate horizontal, i.e. vertical boring and turning machines
B23B   3/12  \	2	2	3C045	B23B   3/12	11	ĤľˤĤΡʤ	with the faceplate vertical, i.e. face lathes
B23B   3/14  \	2	2	3C045	B23B   3/14	3	ĤμĤޤ϶ư	Mountings or drives of faceplates
B23B   3/16  \	1	1	3C045	B23B   3/16	61	ġĻ줿ʪ魯뤿Υå	Turret lathes for turning individually-chucked workpieces
B23B   3/16  A	1	0	3C045	B23B   3/16	232	ʣùԤ	using composite machining
B23B   3/16  Z	1	0	3C045	B23B   3/16	187	¾	Others
B23B   3/18  \	2	2	3C045	B23B   3/18	29	ʿ˲ù缴Ĥ	with horizontal working-spindle
B23B   3/20  \	2	2	3C045	B23B   3/20	57	ľ˲ù缴Ĥ	with vertical working-spindle
B23B   3/22  \	1	1	3C045	B23B   3/22	94	žġإåɤﵡޤ	Turning-machines or devices with rotary tool heads
B23B   3/24  \	2	2	3C045	B23B   3/24	22	ȾưʤΡΤβžġإå	the tools of which do not perform a radial movement; Rotary tool heads therefor
B23B   3/26  \	2	2	3C045	B23B   3/26	141	ȾưΡβžġإå	the tools of which perform a radial movement; Rotary tool heads thereof
B23B   3/28  \	1	1	3C045	B23B   3/28	319	꤬ʤ餤֤ˤä椵ﵡʤʤ餤סʤʤ餤֤ħ£ѣ	Turning-machines in which the feed is controlled by a copying device, i.e. copying lathes (features of copying devices B23Q 35/00)
B23B   3/30  \	1	1	3C045	B23B   3/30	631	İʾβù缴㡥֤ǡﵡ	Turning-machines with two or more working-spindles, e.g. in fixed arrangement
B23B   3/32  \	2	2	3C045	B23B   3/32	29	İʾιʪƱƱκȤԤʤ	for performing identical operations simultaneously on two or more workpieces
B23B   3/34  \	1	1	3C045	B23B   3/34	10	üùܤĤޤ¿βù缴û෿ﵡʣ££ͥ	Short turning-machines with one or multiple working-spindles attended from the end (B23B 3/12 takes precedence)
B23B   3/36  \	1	1	3C045	B23B   3/36	20	̤ʶ°ùŪȤﵡΤߤȹ礻̤ʶ°ùŪȤʤΣ£ѣ	Associations of only turning-machines directed to a particular metal-working result (if the metal-working result is not essential B23Q 39/00)
B23B   5/00  \	0	0	3C045	B23B   5/00	24	βùΤäŬ礷ﵡޤ֡Τ°	Turning-machines or devices specially adapted for particular work; Accessories specially adapted therefor
B23B   5/00  A	0	0	3C045	B23B   5/00	407	̡ޤ⤷ϴɤṳ̈ں魯	Cutting the front surface or end surface of a bar or pipe
B23B   5/00  B	0	0	3C045	B23B   5/00	71	إꥫ֣ԣҥβù	Machining the helical VTR cylinder
B23B   5/00  Z	0	0	3C045	B23B   5/00	679	¾	Others
B23B   5/02  \	1	1	3C045	B23B   5/02	66	ܥޤϥ֥졼ɥ魯Ρʣ££ͥ	for turning hubs or brake drums (B23B 5/04 takes precedence)
B23B   5/04  \	1	1	3C045	B23B   5/04	33	ܥޤϥ֥졼ɥޤϼּξϤʤǺ	for reconditioning hubs or brake drums or axle spindles without removing same from the vehicle
B23B   5/06  \	1	1	3C045	B23B   5/06	75	ۤޤΤ魯	for turning valves or valve bodies
B23B   5/08  \	1	1	3C045	B23B   5/08	315	ּåɡɡ魯Ρʤּססʤ	for turning axles, bars, rods, tubes, rolls, i.e. shaft-turning lathes, roll lathes; Centreless turning
B23B   5/10  \	2	2	3C045	B23B   5/10	17	ԥ륰魯	for turning pilgrim rolls
B23B   5/12  \	2	2	3C045	B23B   5/12	377	ʪΤޤ֤ںХȤˤäޤϴɤभ򤹤ΡʹʪΤޤ֤ںХȤѤΤˤΰʳΤΣ£ģˡΣ	for peeling bars or tubes by making use of cutting bits arranged around the workpiece (making use of cutting bits arranged around the workpiece otherwise than by turning B23D 79/12) [2]
B23B   5/14  \	1	1	3C045	B23B   5/14	188	ڤסʤǺȣ£ġ	Cutting-off lathes (shearing B23D)
B23B   5/16  \	1	1	3C045	B23B   5/16	688	ޤϴɤüγ衤̼ꡤޤϥХ򤹤	for bevelling, chamfering, or deburring the ends of bars or tubes
B23B   5/18  \	1	1	3C045	B23B   5/18	219	󥯼пΡޤϥ魯Ρ㡥󥯥ԥ	for turning crankshafts, eccentrics, or cams, e.g. crankpin lathes
B23B   5/20  \	2	2	3C045	B23B   5/20	5	󥸥󤫤餽ϤʤǤ褤	without removing same from the engine
B23B   5/22  \	2	2	3C045	B23B   5/22	64	ʪݻ㡥Ļ	Holding the workpiece in the machine, e.g. chucking devices
B23B   5/24  \	1	1	3C045	B23B   5/24	81	ԥȥޤ¾ιʪ鷺߷̤魯	for turning pistons or other workpieces to a slightly non-circular cross-section
B23B   5/26  \	1	1	3C045	B23B   5/26	30	Ĥιʪ̤ӳ̤Ʊ魯	for simultaneously turning internal and external surfaces of a body
B23B   5/28  \	1	1	3C045	B23B   5/28	76	ؤޤȼؤޤϤΥ󥯤魯Ρʤ	for turning wheels or wheel sets or cranks thereon, i.e. wheel lathes
B23B   5/30  \	2	2	3C045	B23B   5/30	4	Ĥˤ빩ʤĤ	Arrangements providing for tool control by templates
B23B   5/32  \	2	2	3C045	B23B   5/32	52	ξϤȤʤΡŴƻξѥե	for reconditioning wheel sets without removing same from the vehicle; Underfloor wheel lathes for railway vehicles
B23B   5/34  \	2	2	3C045	B23B   5/34	22	ʪݻ㡥Ļ֡Τư	Holding the workpiece in the machine, e.g. chucking devices therefor; Drivers therefor
B23B   5/36  \	1	1	3C045	B23B   5/36	312	Ūˤ빩ȹʪбưˤä̤ʷ̤魯Ρ㤨	for turning specially-shaped surfaces by making use of relative movement of the tool and work produced by geometrical mechanisms, i.e. forming-lathes
B23B   5/38  \	2	2	3C045	B23B   5/38	50	߿̤ޤϱ߿̡㡥ơѥԥ󡤤魯	for turning conical surfaces inside or outside, e.g. taper pins
B23B   5/40  \	2	2	3C045	B23B   5/40	145	̤ޤϵ峰̤魯	for turning spherical surfaces inside or outside
B23B   5/42  \	2	2	3C045	B23B   5/42	5	ּ̤魯Ρʤּ	for turning relieving surfaces, i.e. relieving-lathes
B23B   5/44  \	2	2	3C045	B23B   5/44	106	ֵޤϰⵡˤä椵¿Ѿޤ¾߷̤魯Ρʤп	for turning polygonal or other non-circular surfaces controlled by gear or guide mechanisms, i.e. eccentric lathes
B23B   5/46  \	2	2	3C045	B23B   5/46	70	餻ޤϤ̤魯Ρʤͤڤ£ǡ	for turning helical or spiral surfaces (thread cutting B23G)
B23B   5/48  \	3	3	3C045	B23B   5/48	135	¡㡥餻¡ں魯	for cutting grooves, e.g. oil grooves of helicoidal shape
B23B   7/00  \	0	0	3C045	B23B   7/00	93	ñβù缴ͭ뼫ưޤȾưﵡ㡥椵줿ΡΤ֡ĤޤϤʾβù缴ļưޤȾưﵡζ̻	Automatic or semi-automatic turning-machines with a single working-spindle, e.g. controlled by cams; Equipment therefor; Features common to automatic and semi-automatic turning-machines with one or more working-spindles
B23B   7/02  \	1	1	3C045	B23B   7/02	57	ѼưޤȾưﵡ	Automatic or semi-automatic machines for turning of stock
B23B   7/04  \	2	2	3C045	B23B   7/04	48	å	Turret machines
B23B   7/06  \	2	2	3C045	B23B   7/06	170	٤缴Ĥ	with sliding headstock
B23B   7/08  \	2	2	3C045	B23B   7/08	7	ù缴ľˤĤ	with the working-spindle vertical
B23B   7/10  \	2	2	3C045	B23B   7/10	38	°֡㡥ɸ	Accessories, e.g. guards
B23B   7/12  \	1	1	3C045	B23B   7/12	25	̹ʪѼưޤȾưﵡ	Automatic or semi-automatic machines for turning of workpieces
B23B   7/14  \	2	2	3C045	B23B   7/14	12	ù缴ʿˤĤ	with the working-spindle horizontal
B23B   7/16  \	2	2	3C045	B23B   7/16	31	ù缴ľˤĤ	with the working-spindle vertical
B23B   9/00  \	0	0	3C045	B23B   9/00	127	ʣĤβù缴ưޤȾưﵡ㡥餫줿֤˳Фɥ७ꥢ֤줿缴ư¿ΤʡñˤŬѤǤʣ££	Automatic or semi-automatic turning-machines with a plurality of working-spindles, e.g. automatic multiple-spindle machines with spindles arranged in a drum carrier able to be moved into pre-determined positions; Equipment therefor (equipment applicable to single-spindle machines B23B 7/00)
B23B   9/02  \	1	1	3C045	B23B   9/02	26	ѼưޤȾư	Automatic or semi-automatic machines for turning of stock
B23B   9/04  \	2	2	3C045	B23B   9/04	44	ù缴ʿˤĤ	with the working-spindles horizontal
B23B   9/06  \	2	2	3C045	B23B   9/06	6	ù缴ľˤĤ	with the working-spindles vertical
B23B   9/08  \	1	1	3C045	B23B   9/08	39	̹ʪѼưޤȾư	Automatic or semi-automatic machines for turning of workpieces
B23B   9/10  \	2	2	3C045	B23B   9/10	33	ù缴ʿˤĤ	with the working-spindles horizontal
B23B   9/12  \	2	2	3C045	B23B   9/12	8	ù缴ľˤĤ	with the working-spindles vertical
B23B  11/00  \	0	0	3C045	B23B  11/00	258	¾βù㡥Ωꡤե饤ꡤ䡤Ԥʤ֤ȤߤưޤȾưﵡ	Automatic or semi-automatic turning-machines incorporating equipment for performing other working procedures, e.g. slotting, milling, rolling
B23B  13/00  \	0	0	3C045	B23B  13/00	2	ﵡѤΡưŪĻޤϰ⤹뤿	Arrangements for automatically conveying, chucking or guiding stock for turning machines
B23B  13/00  A	0	0	3C045	B23B  13/00	56	ü򥷥ݥȥĥȤ뤿Τ	for short-cutting of the tip of a new member
B23B  13/00  B	0	0	3C045	B23B  13/00	87	ĺӽ뤿Τ	for removing the residual member
B23B  13/00  Z	0	0	3C045	B23B  13/00	68	¾	Others
B23B  13/02  \	1	1	3C045	B23B  13/02	0	Ĥβù缴ﵡѤΤ	for turning-machines with a single working-spindle
B23B  13/02  A	1	0	3C045	B23B  13/02	54		bar member feed in general
B23B  13/02  B	1	1	3C045	B23B  13/02	316	夫鲡Ф	Extrusion of the bar member from the back
B23B  13/02  C	1	1	3C045	B23B  13/02	28	üФ	Pulling of the bar member from the tip
B23B  13/02  E	1	0	3C045	B23B  13/02	20	Ļ	bar member holding in general
B23B  13/02  F	1	1	3C045	B23B  13/02	124	üĻ	holding the tail end
B23B  13/02  G	1	1	3C045	B23B  13/02	53	Ļ	holding the intermediate part
B23B  13/02  J	1	0	3C045	B23B  13/02	106	ΰ	bar member guiding
B23B  13/02  Z	1	0	3C045	B23B  13/02	29	¾	Others
B23B  13/04  \	1	1	3C045	B23B  13/04	103	ʣĤβù缴ﵡѤΤ	for turning-machines with a plurality of working-spindles
B23B  13/06  \	1	1	3C045	B23B  13/06	26	ब˵ù줿ﵡζưǤĤ	Arrangements for switching-off the drive of turning-machines after the stock has been completely machined
B23B  13/08  \	1	1	3C045	B23B  13/08	260	ϩˤ뿶ư򸺾뤿Ρޤ򸺾뤿̣֡ǣˡ	Arrangements for reducing vibrations in feeding-passages or for damping noise (damping noise in general G10K)
B23B  13/10  \	1	1	3C045	B23B  13/10	216	ѥޥĤ	with magazines for stock
B23B  13/12  \	1	1	3C045	B23B  13/12	15	°֡㡥ȥåѡå	Accessories, e.g. stops, grippers
B23B  13/12  B	1	0	3C045	B23B  13/12	233	ɥ֥	Guide bushing
B23B  13/12  Z	1	0	3C045	B23B  13/12	139	¾°֡	Others (auxiliary device)
B23B  15/00  \	0	0	3C045	B23B  15/00	2	ä˼ưޤȾưﵡѤ߷פ줿ʪ롤ַᡤȿžĻޤӽФ뤿	Arrangements for conveying, loading, adjusting, reversing, chucking, or discharging workpieces specially designed for automatic or semi-automatic turning-machines
B23B  15/00  A	0	0	3C045	B23B  15/00	706	ޤ϶ӽФԤ	Supply or supply and discharge performed
B23B  15/00  G	0	0	3C045	B23B  15/00	250	ӽФΤߤԤ	Discharge only performed
B23B  15/00  N	0	0	3C045	B23B  15/00	212	缴֤Ρȿž	fed or inverted between main spindles
B23B  15/00  Z	0	0	3C045	B23B  15/00	64	¾	Others
B23B  17/00  \	0	0	3C045	B23B  17/00	107	ץ٥åɡʴåե졼ࡤ켫Σ£ѣ	Lathe beds (foundation frames, carriage guides as such B23Q 1/00)
B23B  19/00  \	0	0	3C045	B23B  19/00	229	缴桨ɤΤ褦ʹˤĤƤ⤽Ʊʬ	Headstocks; Equivalent parts of any machine tools
B23B  19/02  \	1	1	3C045	B23B  19/02	7	ù缴˴Ϣ㡥ٻ¤ʣ££ͥ	Working-spindles; Features relating thereto, e.g. supporting arrangements (B23B 13/00 takes precedence)
B23B  19/02  A	1	0	3C045	B23B  19/02	857	缴ԥɥι¤	Main spindle structure
B23B  19/02  B	1	0	3C045	B23B  19/02	1117	缴λٻ	Main spindle supporting
B23B  19/02  C	1	0	3C045	B23B  19/02	51	ξƬ缴	Double-headed main spindle
B23B  19/02  D	1	0	3C045	B23B  19/02	353	ưã	Drive or transmission system
B23B  19/02  E	1	0	3C045	B23B  19/02	93	缴ν֤Ǥߡ̴Ϣ£ѣ£ѣǡ	Stopping the main spindle at the specified position (correlation B 23 Q 5/20; indexing control B 23 Q 16/02 G)
B23B  19/02  Z	1	0	3C045	B23B  19/02	234	¾	Others
B23B  21/00  \	0	0	3C045	B23B  21/00	10	ױ桨桨ʪʹۥ££ˡɤΤ褦ʹˤĤƤ⤽ʬ	Lathe carriages; Cross-slides; Tool posts (tool holders B23B 29/00); Similar parts of any machine tools
B23B  21/00  A	0	0	3C045	B23B  21/00	390	ħ	characterized by the carriage
B23B  21/00  B	0	0	3C045	B23B  21/00	83	ޤϥȥĥץ饤ɤħ	characterized by the cross slide or top slide
B23B  21/00  C	0	0	3C045	B23B  21/00	517	ʪħ	characterized by the slide
B23B  21/00  Z	0	0	3C045	B23B  21/00	46	¾	Others
B23B  23/00  \	0	0	3C045	B23B  23/00	2	桨	Tailstocks; Centres
B23B  23/00  A	0	0	3C045	B23B  23/00	518	˴Ϣ	related to the foot stock
B23B  23/00  C	0	0	3C045	B23B  23/00	206	ǥĥɥ󥿡饤֥󥿤˶̤ħ	Feature common to the dead centre and live centre
B23B  23/00  Z	0	0	3C045	B23B  23/00	168	¾	Others
B23B  23/02  \	1	1	3C045	B23B  23/02	100	ǥåɥ	Dead centres
B23B  23/04  \	1	1	3C045	B23B  23/04	174	饤֥	Live centres
B23B  25/00  \	0	0	3C045	B23B  25/00	9	ﵡ°֤ޤ֡ʹѣ£ѡѤޤϽ£ѣ	Accessories or auxiliary equipment for turning-machines (for machine tools in general B23Q; cooling or lubricating B23Q 11/12)
B23B  25/00  A	0	0	3C045	B23B  25/00	235	ڶ̡̰£ѣ	Chip disposal (in general B 23 Q 11/00)
B23B  25/00  Z	0	0	3C045	B23B  25/00	251	¾°֡	Others (auxiliary or supplementary device)
B23B  25/02  \	1	1	3C045	B23B  25/02	116	ﵡˤڶ˺֡ں﹩˼Ĥڶ˺֣££	Arrangements for chip-breaking in turning-machines (on cutting tools B23B 27/22)
B23B  25/04  \	1	1	3C045	B23B  25/04	71	äﵡѤ߷פ줿ݸ֡ʰ̣ƣС	Safety guards specially designed for turning-machines (in general F16P)
B23B  25/06  \	1	1	3C045	B23B  25/06	727	ХȤޤϹʪμĤꡤޤϴƻѤΡﵡѤ¬ˡȤꡤޤĴʡʷ¬֤ޤϷ״ǣ¡	Measuring, gauging, or adjusting equipment on turning-machines for setting-on, feeding, controlling, or monitoring the cutting tools or work (measuring devices or gauges G01B)
B23B  27/00  \	0	0	3C046	B23B  27/00	20	ﵡޤ椰ѹʥܡѣ££ˡ̤ι񡨤Τ°	Tools for turning or boring machines (for drilling machines B23B 51/00); Tools of a similar kind in general; Accessories therefor
B23B  27/00  A	0	0	3C046	B23B  27/00	362	ڿϤηħΤХ	Byte characterized by the shape of the cutting edge
B23B  27/00  B	0	0	3C046	B23B  27/00	156	ľϤͭΡ̴ݶ͡ΰ٤Υۥž	having a ring type cutting edge (round piece), holder therefor (non-rotary)
B23B  27/00  C	0	0	3C046	B23B  27/00	232	ХȤοưɻߡ̥Хȥǲ	Byte vibration prevention (solved on the byte shank)
B23B  27/00  D	0	0	3C046	B23B  27/00	243	եХ	Byte with a detector
B23B  27/00  Z	0	0	3C046	B23B  27/00	163	¾̥ĥץݥȤʤɡ	Others (chip sheet, etc.)
B23B  27/02  \	1	1	3C046	B23B  27/02	3	ľμӳ٤ΤĤں泌åĥХȡʣ££££ͥ	Cutting tools with straight main part and cutting edge at an angle (B23B 27/04-B23B 27/08 take precedence)
B23B  27/02  A	1	0	3C046	B23B  27/02	51	ɻѥХȥۥڤӥХ	Overload preventive byte holder and byte
B23B  27/02  B	1	0	3C046	B23B  27/02	50	󿶼ХȵڤӥХȥۥ	Oscillating byte and byte holder
B23B  27/02  C	1	0	3C046	B23B  27/02	153	¿ϥХȡ¿ŪХȤޤࡤ㡥ڤ̼̰͡ηΤߡʣХȤˤƱùˡ	Multi-edge byte (including the multi-purpose byte, e.g. cut-off + chamfer) (single unit only (simultaneous machining by multiple bytes R 29/24)
B23B  27/02  Z	1	0	3C046	B23B  27/02	12	¾	Others
B23B  27/04  \	1	1	3C046	B23B  27/04	820	ͤĤХȡʣ££ͥ	Cutting-off tools (B23B 27/08 takes precedence)
B23B  27/06  \	1	1	3C046	B23B  27/06	151	سں﹩񡤤ʤХ	Profile cutting tools, i.e. forming-tools
B23B  27/08  \	1	1	3C046	B23B  27/08	5	ޤϱľĥХ	Cutting tools with blade- or disc-like main parts
B23B  27/08  A	1	0	3C046	B23B  27/08	48	׾Хȡ㡥ݥХȡ	Disk type byte, e.g. circular byte
B23B  27/08  Z	1	0	3C046	B23B  27/08	29	¾㡥ľΤΰڿϤȤХȡ	Other, e.g. byte using a part of a ring member as the cutting edge
B23B  27/10  \	1	1	3C046	B23B  27/10	508	ѤΤ̤ʹĥХ	Cutting tools with special provision for cooling
B23B  27/12  \	2	2	3C046	B23B  27/12	74	Ϣ³Ū˲ž߷ں泌åĤΡΤΥۥ	with a continuously-rotated circular cutting edge; Holders therefor
B23B  27/14  \	1	1	3C046	B23B  27/14	87	ӥåȤޤϥåפ̤ʺǤǤƤХ	Cutting tools of which the bits or tips are of special material
B23B  27/14  A	1	0	3C046	B23B  27/14	6505	ع¤ħͭΡ㡥ʤͥˡ̺͡ʤξϣͥ衤ʤ	characterized by the lamination structure, e.g. coating (takes precedence.) (A takes precedence for the material + coating, diamond coating)
B23B  27/14  B	1	0	3C046	B23B  27/14	2858	ħͭΡ̥ݥĥȢããƷ뢪£ƣ⢪ãáɡߥĥã¡	characterized by the material (cermet R C 22 C 29; sintering R B 22 F 7/06; alloy R C 22 C; diamond, ceramic R C 04 B)
B23B  27/14  C	1	0	3C046	B23B  27/14	1751	ħͭΡ̣ͥ	characterized by the shape (27/22 takes precedence.)
B23B  27/14  Z	1	0	3C046	B23B  27/14	65	¾	Others
B23B  27/16  \	2	2	3C046	B23B  27/16	28	򴹲ǽںӥåȤĤΡ㡥ײǽΤ	with exchangeable cutting bits, e.g. able to be clamped
B23B  27/16  A	2	0	3C046	B23B  27/16	957	ĥפιѤ륯׵	Clamp mechanism utilising the chip hole
B23B  27/16  B	2	0	3C046	B23B  27/16	825	ĥפιѤʤ׵	Clamp mechanism not utilising the chip hole
B23B  27/16  Z	2	0	3C046	B23B  27/16	461	¾̥ݥĥס	Others (throw-away chip)
B23B  27/18  \	2	2	3C046	B23B  27/18	363	Τ˼Ĥ줿ںӥåȤޤϥåפĤΡ㡥Ťˤ	with cutting bits or tips rigidly mounted, e.g. by brazing
B23B  27/20  \	2	2	3C046	B23B  27/20	1651	ɥӥåȤĤ	with diamond bits
B23B  27/22  \	1	1	3C046	B23B  27/22	1262	åץ֥졼֤ĥХ	Cutting tools with chip-breaking equipment
B23B  27/24  \	1	1	3C046	B23B  27/24	55	åڤ깩	Knurling tools
B23B  29/00  \	0	0	3C046	B23B  29/00	6	žʤں﹩Υۥʣ££ͥˡ椰ޤ椰إåɡۥ°	Holders for non-rotary cutting tools (B23B 27/12 takes precedence); Boring bars or boring heads; Accessories for tool holders
B23B  29/00  A	0	0	3C046	B23B  29/00	159	Хȥۥ	Byte holder
B23B  29/00  B	0	1	3C046	B23B  29/00	27	Хȥۥ	Supplementary instrument for the byte holder
B23B  29/00  C	0	1	3C046	B23B  29/00	225	ХȤΥפħΤХȥۥ	Byte holder characterized by byte clamping
B23B  29/00  D	0	2	3C046	B23B  29/00	11	ХȤΥפħΤХȥۥ	Supplementary instrument for the byte holder characterized by byte clamping
B23B  29/00  E	0	1	3C046	B23B  29/00	223	֤ĴħΤХȥۥ	Byte holder characterized by adjustment of the cutting edge position
B23B  29/00  F	0	2	3C046	B23B  29/00	26	֤ĴħΤХȥۥ	Supplementary instrument for the byte holder characterized by adjustment of the cutting edge position
B23B  29/00  P	0	1	3C046	B23B  29/00	236	ץꥻĥȹѥХȥۥ	Byte holder for the presetting tool
B23B  29/00  Z	0	0	3C046	B23B  29/00	80	¾	Others
B23B  29/02  \	1	1	3C046	B23B  29/02	7	椰	Boring bars
B23B  29/02  A	1	0	3C046	B23B  29/02	246	ɿդ椰	Boring bar with a vibration-proofing means
B23B  29/02  B	1	0	3C046	B23B  29/02	59	饤ܥ󥰥С	Line boring bar
B23B  29/02  Z	1	0	3C046	B23B  29/02	196	¾	Others
B23B  29/03  \	1	1	3C046	B23B  29/03	9	椰إå	Boring heads
B23B  29/03  A	1	0	3C046	B23B  29/03	138	ץꥻĥȼ椰깩㡥⥸鷿	Preset type boring tool, e.g. modular type
B23B  29/03  B	1	0	3C046	B23B  29/03	121	̼ꡢ·椰إĥ	Boring head for chamfering or spot facing
B23B  29/03  Z	1	0	3C046	B23B  29/03	320	¾	Others
B23B  29/034  \	2	2	3C046	B23B  29/034	9	Ⱦ˰ư빩ĤΡ㡥̼ޤϥåȤΡΣ	with tools moving radially, e.g. for making chamfers or undercuttings [4]
B23B  29/034  A	2	0	3C046	B23B  29/034	207	ѷˤ깩򤻤	Tool pressed off by elastic deformation
B23B  29/034  B	2	0	3C046	B23B  29/034	594	ư̤˱Ĥƹ򤻤	Tool pressed off along the slide surface
B23B  29/034  C	2	0	3C046	B23B  29/034	146	пˤ깩򤻤	Tool pressed off by an eccentric shaft
B23B  29/034  D	2	0	3C046	B23B  29/034	333	̼ꡢ·ꡢڤѤ椰إĥ	Press-off type boring head for chamfering, spot facing, or groove cutting
B23B  29/034  Z	2	0	3C046	B23B  29/034	178	¾	Others
B23B  29/04  \	1	1	3C046	B23B  29/04	21	ĤΥХȤĤġۥ	Tool holders for a single cutting tool
B23B  29/04  A	1	0	3C046	B23B  29/04	243	ХϥХȥۥΥġݥۥؤμդ̥סĴ	Attaching the byte or byte holder to the tool holder (clamping, position adjustment)
B23B  29/04  Z	1	0	3C046	B23B  29/04	69	¾	Others
B23B  29/06  \	2	2	3C046	B23B  29/06	13	ХȤĤ뤿Ĺ֤줿¤ۥ	Tool holders equipped with longitudinally- arranged grooves for setting the cutting tool
B23B  29/08  \	2	2	3C046	B23B  29/08	4	ХȤĤ뤿β֤줿¤ۥ	Tool holders equipped with grooves arranged crosswise to the longitudinal direction for setting the cutting tool
B23B  29/10  \	3	3	3C046	B23B  29/10	29	ĴǽΥ󥿥١Ĥ	with adjustable counterbase for the cutting tool
B23B  29/12  \	2	2	3C046	B23B  29/12	19	ġۥ̤ʹ¤	Special arrangements on tool holders
B23B  29/12  A	2	0	3C046	B23B  29/12	124	ưںùѥġݥۥ	Tool holder for vibration cutting
B23B  29/12  Z	2	0	3C046	B23B  29/12	361	¾㡥Сʤɡ	Others, e.g. detection, oil supply, etc.
B23B  29/14  \	3	3	3C046	B23B  29/14	27	ХȤŪ˻ٻǤΡ㡥Фͥפˤ	affording a yielding support of the cutting tool, e.g. by spring clamping
B23B  29/16  \	3	3	3C046	B23B  29/16	77	ʪ忶ߤ˻ٻ	for supporting the workpiece in a backrest
B23B  29/18  \	3	3	3C046	B23B  29/18	30	ХȤޤ	for retracting the cutting tool
B23B  29/20  \	3	3	3C046	B23B  29/20	13	åȤΥ꡼˥󥯤ˤäƥġۥ֤뤿Τ	for placing same by shanks in sleeves of a turret
B23B  29/22  \	3	3	3C046	B23B  29/22	6	ޤϥڡˤäƹĴ	for tool adjustment by means of shims or spacers
B23B  29/24  \	1	1	3C046	B23B  29/24	11	ʣĤΥХȤĤġۥ㡥å	Tool holders for a plurality of cutting tools, e.g. turrets
B23B  29/24  A	1	0	3C046	B23B  29/24	287	Хȡžμդ򴹡Ĵ	Attachment, replacement, or position adjustment of the byte or rotary tool
B23B  29/24  B	1	0	3C046	B23B  29/24	150	Хߴ֤μդִط̥ĥȤ餷ʤΤޤ	Relative attached positions of bytes (including those which are not like the turret)
B23B  29/24  C	1	0	3C046	B23B  29/24	89	ʣХƱù	Simultaneous machining by multiple bytes
B23B  29/24  D	1	0	3C046	B23B  29/24	201	žζư	Rotary tool drive
B23B  29/24  Z	1	0	3C046	B23B  29/24	402	¾ʣĥȡإĥɸ򴹤ʤɡ	Others (multiple turrets, head replacement, etc.)
B23B  29/26  \	2	2	3C046	B23B  29/26	1	֤ˤġۥ	Tool holders in fixed position
B23B  29/28  \	2	2	3C046	B23B  29/28	49	ľΤޤ˼ưĴǤ륿å	Turrets manually adjustable about a vertical pivot
B23B  29/30  \	2	2	3C046	B23B  29/30	0	ʿΤޤ˼ưĴǤ륿å	Turrets manually adjustable about a horizontal pivot
B23B  29/32  \	2	2	3C046	B23B  29/32	449	ư϶ưˤĴǽʥåȡʤåȥإå	Turrets adjustable by power drive, i.e. turret heads
B23B  29/34  \	2	2	3C046	B23B  29/34	1	ХȤȥꥬå	Turrets equipped with triggers for releasing the cutting tools
B23B  31/00  \	0	0	3C032	B23B  31/00	14	åѥ󥷥ޥɥ롨ΤΤŬģ£ѣʪޤϹ򥹥ԥɥ˸夹֣£ѣʪľƯŪޤŵŪϤˤݻž֣£ѣ	Chucks; Expansion mandrels; Adaptations thereof for remote control (devices for securing work or tools to spindles in general B23Q 3/12; rotary devices holding by magnetic or electrical force acting directly on work B23Q 3/152)
B23B  31/00  A	0	0	3C032	B23B  31/00	135	ĻʤؤΥ塤ӽʣȣߡ	Work mounting on the holding means, pressure removal (H11 newly provided)
B23B  31/00  B	0	0	3C032	B23B  31/00	238	Ļʤؤΰʪɻߡӽʣȣߡ	Prevention or elimination of foreign matter entry into the holding means (H11 newly provided)
B23B  31/00  C	0	0	3C032	B23B  31/00	396	ĻʤˤꡤѤ˴ؤħʣȣߡ	characterized by lubrication or cooling on the holding means (H11 newly provided)
B23B  31/00  D	0	0	3C032	B23B  31/00	419	Ļʤˤ븡Сǧʣȣߡ	Detection or confirmation on the holding means (H11 newly provided)
B23B  31/00  Z	0	0	3C032	B23B  31/00	36	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/02  \	1	1	3C032	B23B  31/02	4	å	Chucks
B23B  31/02  C	1	0	3C032	B23B  31/02	83	åΤμ缴ؤδʰæʣȣߡ	Simple setting/removal mechanism of the chuck body to the main spindle (H11 newly provided)
B23B  31/02  D	1	0	3C032	B23B  31/02	285	Ĵ뤿εʣȣߡ	Mechanism for adjusting the tool in the axial direction (H11 newly provided)
B23B  31/02  E	1	0	3C032	B23B  31/02	56	ΥåФߤᵡʣȣߡ	Tool's rotation stopping mechanism to the chuck (H11 newly provided)
B23B  31/02  Z	1	0	3C032	B23B  31/02	321	¾	Others
B23B  31/02 601 \	2	2	3C032	B23B  31/02	1	깩Ļʣȣߡ	Holding of a particular tool (H11 newly provided)
B23B  31/02 601 A	2	0	3C032	B23B  31/02	84	﹩ʣȣߡ	Grinding tool (H11 newly provided)
B23B  31/02 601 B	2	0	3C032	B23B  31/02	53	ں﹩ʣȣߡ	Cutting tool (H11 newly provided)
B23B  31/02 601 C	2	1	3C032	B23B  31/02	92	ե饤ʥɥߥˡʣȣߡ	Milling tool (excluding the end mill) (H11 newly provided)
B23B  31/02 601 D	2	1	3C032	B23B  31/02	85	ͤڤꡤڤ깩ʣȣߡ	tapping or gear cutting tool (H11 newly provided)
B23B  31/02 601 E	2	1	3C032	B23B  31/02	90	ꤢüʤΤΤߡ͡ʣȣߡ	Drilling tool (special ones only) (H11 newly provided)
B23B  31/02 601 F	2	2	3C032	B23B  31/02	72	׷⹩ʣȣߡ	Impact tool (H11 newly provided)
B23B  31/02 601 Z	2	0	3C032	B23B  31/02	40	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/02 610 \	2	2	3C032	B23B  31/02	0	Ļʣȣߡ	Holding of a particular work  (H11 newly provided)
B23B  31/02 610 A	2	0	3C032	B23B  31/02	45	ľ̥ǥޤ͡ʣȣߡ	Plate type work (including the disk type work) (H11newly provided)
B23B  31/02 610 B	2	0	3C032	B23B  31/02	31	ʡʣȣߡ	Optical parts (H11 newly provided)
B23B  31/02 610 C	2	0	3C032	B23B  31/02	55	ءۥʣȣߡ	Wheels (H11 newly provided)
B23B  31/02 610 D	2	0	3C032	B23B  31/02	92	֡ͤʣȣߡ	Gear, screw (H11 newly provided)
B23B  31/02 610 Z	2	0	3C032	B23B  31/02	239	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/06  \	2	2	3C032	B23B  31/06	164	ޤϹʪμ곰˴ϢħΤΡΤ°	Features relating to the removal of tools or work; Accessories therefor
B23B  31/07  \	3	3	3C032	B23B  31/07	91	賰ѤӡΣ	Ejector wedges [5]
B23B  31/08  \	2	2	3C032	B23B  31/08	2	ޤϹʪŪݻ	holding tools or work yieldably
B23B  31/08  B	2	0	3C032	B23B  31/08	48	Υեƥݻʣȣߡ	Tool floating retention (H11 newly provided)
B23B  31/08  Z	2	0	3C032	B23B  31/08	73	¾	Others
B23B  31/10  \	2	2	3C032	B23B  31/10	12	ݻޤϤĤ֤ޤϤľܤʤħ	characterised by the retaining or gripping devices or their immediate operating means
B23B  31/10  A	2	0	3C032	B23B  31/10	57	ޤ̤˰ưĥ	Chuck that moves the claw individually
B23B  31/10  B	2	0	3C032	B23B  31/10	428	ĥޤħΤ	characterized by the chuck claw
B23B  31/10  F	2	1	3C032	B23B  31/10	65	ʣĻ̤ƤΡʣȣߡ	Multiple holding surfaces formed (H11 newly provided)
B23B  31/10  G	2	1	3C032	B23B  31/10	103	饤դΤΡʣȣߡ	with an equalising mechanism (H11 newly provided)
B23B  31/10  Z	2	0	3C032	B23B  31/10	354	¾㡥ĥ򴹡	Others, e.g. chuck replacement
B23B  31/103  \	3	3	3C032	B23B  31/103	9	ˤݻݤ⡤ߤΣ	Retention by pivotal elements, e.g. catches, pawls [5]
B23B  31/107  \	3	3	3C032	B23B  31/107	3	˺ưߤˤݻ㡥ԥ󡤥ͥӡߤưˤݻ㡥ܡΣ	Retention by laterally-acting detents, e.g. pins, screws, wedges; Retention by loose elements, e.g. balls [5]
B23B  31/107  A	3	0	3C032	B23B  31/107	187	Ⱦưޤˤ	using the claw that moves in the radial direction
B23B  31/107  B	3	0	3C032	B23B  31/107	421	ܡݥˤ	using a ball
B23B  31/107  C	3	0	3C032	B23B  31/107	136	ͤˤ	using a screw
B23B  31/107  D	3	0	3C032	B23B  31/107	52	ưΰưΥϤѴΡʣȣߡ	Conversion of motion of the cross-direction acting member into the clamping force in the axial direction (H11 newly provided)
B23B  31/107  Z	3	0	3C032	B23B  31/107	114	¾̹ۥΤ¾ħ	Others (other features of the tool holder)
B23B  31/11  \	3	3	3C032	B23B  31/11	97	ͤˤݻΣ	Retention by threaded connection [5]
B23B  31/113  \	3	3	3C032	B23B  31/113	298	ХͥåȷˤݻΣ	Retention by bayonet connection [5]
B23B  31/113  A	3	0	3C032	B23B  31/113	152	ۥ𤹤Ρʣȣߡ	via a cylindrical holder (H11 newly provided)
B23B  31/113  B	3	0	3C032	B23B  31/113	182	ơѾۥ𤹤Ρʣȣߡ	via a tapered holder (H11 newly provided)
B23B  31/113  C	3	1	3C032	B23B  31/113	16	߼ʤۥ֤˷礹Ρʣȣߡ	Pull-in means engaged to the holder's internal space (H11 newly provided)
B23B  31/113  Z	3	0	3C032	B23B  31/113	38	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/117  \	3	3	3C032	B23B  31/117	6	໤Τߤˤ硤㡥ץ󥰡꡼֡ơѡѤΡΣ	Retention by friction only, e.g. using springs, resilient sleeves, tapers [5]
B23B  31/117 601 \	4	4	3C032	B23B  31/117	2	ơѾۥ˰ߥơƱΤܿˤݻʣͥˡʣȣߡ	Retention by mutual contact of tapered surfaces by pulling in the tapered holder in the axial direction (31/113 and 31/22 take precedence.) (H11 newly provided)
B23B  31/117 601 A	4	0	3C032	B23B  31/117	702	ץ륹åɤΡʣȣߡ	Pulling in the pull stud (H11 newly provided)
B23B  31/117 601 B	4	1	3C032	B23B  31/117	98	ơ̤ȥեṳ̈Σ̤ǹ«ǽʤΡʣŤͥˡʣȣߡ	bindable by two surfaces; the tapered surface and flange end surface (31/117, 601 E takes precedence.) (H11 newly provided)
B23B  31/117 601 C	4	1	3C032	B23B  31/117	40	μ缴Ǥβݻɻߵաʣȣߡ	Temporary holding of the tool within the main spindle, with the drop preventive mechanism (H11 newly provided)
B23B  31/117 601 D	4	1	3C032	B23B  31/117	117	ϥåաʣȣߡ	with a booster or lock mechanism (H11 newly provided)
B23B  31/117 601 E	4	0	3C032	B23B  31/117	146	ľơѾۥѤΤΡʣȣߡ	for the ring type tapered holder (H11 newly provided)
B23B  31/117 601 F	4	0	3C032	B23B  31/117	92	Ф͡ɥСɿ˴ؤΡʣȣߡ	related to vibration-proofing of the coned disc spring, draw bar, etc. (H11 newly provided)
B23B  31/117 601 K	4	0	3C032	B23B  31/117	120	ɥܥȤˤΡʣȣߡ	using a draw bolt (H11 newly provided)
B23B  31/117 601 Z	4	0	3C032	B23B  31/117	63	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/117 610 \	4	4	3C032	B23B  31/117	1	ϥ󥰾Τѷˤݻʣȣߡ	Retention by deformation of the cylindrical or ring type member (H11 newly provided)
B23B  31/117 610 A	4	0	3C032	B23B  31/117	79	ΤǤΡʣȣߡ	Elastic member (H11 newly provided)
B23B  31/117 610 B	4	0	3C032	B23B  31/117	162	ΤήΰѤΡʣȣߡ	Fluid pressure acting on a cylindrical member (H11 newly provided)
B23B  31/117 610 C	4	0	3C032	B23B  31/117	230	ơѾΤȤ줿ե󥰤ѷΡʣȣߡ	Tapered cylindrical member deformed by out-fitted tightening ring (H11 newly provided)
B23B  31/117 610 F	4	0	3C032	B23B  31/117	111	ǮѷǮĥѤΡʣȣߡ	utilising thermal deformation or thermal expansion (H11 newly provided)
B23B  31/117 610 Z	4	0	3C032	B23B  31/117	15	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/12  \	3	3	3C032	B23B  31/12	15	ġĴǽǤʤˤ餺ƱƯʣΥ衼å	Chucks with simultaneously-acting jaws, whether or not also individually adjustable
B23B  31/12  C	3	0	3C032	B23B  31/12	352	ޤ߿̾ưΡʣȣߡ	Claw that moves over a conical surface (H11 newly provided)
B23B  31/12  D	3	1	3C032	B23B  31/12	81	쥹åʣȣߡ	Keyless chuck (H11 newly provided)
B23B  31/12  E	3	1	3C032	B23B  31/12	61	ѡʣȣߡ	for the work (H11 newly provided)
B23B  31/12  F	3	0	3C032	B23B  31/12	18	ޤ缴˿ľžΡʣȣߡ	Claws that rotates within a plane which is perpendicular to the axial line of the main spindle (H11 newly provided)
B23B  31/12  G	3	1	3C032	B23B  31/12	71	֤ˤäƶưΡʣȣߡ	driven by a gear (H11 newly provided)
B23B  31/12  H	3	0	3C032	B23B  31/12	83	ʣåȤ߹碌ʣȣߡ	Combination of multiple chucks (H11 newly provided)
B23B  31/12  J	3	1	3C032	B23B  31/12	47	ĤΥåФѤΤΡʣȣߡ	One chuck used for centring (H11 newly provided)
B23B  31/12  Z	3	0	3C032	B23B  31/12	73	¾	Others
B23B  31/14  \	4	4	3C032	B23B  31/14	87	ϤѤޤ	involving the use of centrifugal force
B23B  31/16  \	4	4	3C032	B23B  31/16	16	Ⱦư	moving radially
B23B  31/16  A	4	0	3C032	B23B  31/16	63	ĥޤηưˤĻϤ򶯲	Holding force enhanced by tilting of the chuck claw
B23B  31/16  D	4	0	3C032	B23B  31/16	242	åޤμա곰ĴĴ	Chuck claw setting/removal; position adjustment; position adjusting jig
B23B  31/16  F	4	0	3C032	B23B  31/16	69	ޤκĴѤμ	Jig for grinding or adjusting the claw
B23B  31/16  G	4	0	3C032	B23B  31/16	43	ĥưն㡥ĥưϥ	Power tightening instrument for the chuck, e.g. power wrench outside the chuck
B23B  31/16  Z	4	0	3C032	B23B  31/16	591	¾	Others
B23B  31/163  \	5	5	3C032	B23B  31/163	144	İʾ¤ˤưΡΣ	actuated by one or more spiral grooves [5]
B23B  31/165  \	5	5	3C032	B23B  31/165	54	ͤȥʥåȵˤưΡΣ	actuated by screw-and-nut mechanisms [5]
B23B  31/167  \	5	5	3C032	B23B  31/167	32	ХåˤưΡΣ	actuated by oblique racks [5]
B23B  31/169  \	5	5	3C032	B23B  31/169	39	֤ˤưΡʣ££ͥˡΣ	actuated by toothed gearing (B23B 31/167 takes precedence) [5]
B23B  31/171  \	5	5	3C032	B23B  31/171	70	ȾΥ̤ˤưΡΣ	actuated by a cam surface in a radial plane [5]
B23B  31/173  \	5	5	3C032	B23B  31/173	8	Ʊ߿̤ˤưΡʣ££ͥˡΣ	actuated by coaxial conical surfaces (B23B 31/177 takes precedence) [5]
B23B  31/173  C	5	0	3C032	B23B  31/173	36	ѡʣȣߡ	for the tool (H11 newly provided)
B23B  31/173  Z	5	0	3C032	B23B  31/173	30	¾	Others
B23B  31/175  \	5	5	3C032	B23B  31/175	121	ƱˤäưСˤưΡΣ	actuated by levers moved by a coaxial control rod [5]
B23B  31/177  \	5	5	3C032	B23B  31/177	218	Ʊη̤ˤưΡʣ££ͥˡΣ	actuated by the oblique surfaces of a coaxial control rod (B23B 31/167 takes precedence) [5]
B23B  31/18  \	4	4	3C032	B23B  31/18	236	åμޤǿưǽʤ	pivotally movable in planes containing the axis of the chuck
B23B  31/19  \	4	4	3C032	B23B  31/19	113	åμʿԤư	moving parallel to the axis of the chuck
B23B  31/20  \	4	4	3C032	B23B  31/20	598	ĳե꡼֡㡥åȥå	Longitudinally-split sleeves, e.g. collet chucks
B23B  31/20  A	4	0	3C032	B23B  31/20	476	ݥ¤Ļ̣Ƥͥ	Holding of the work outer surface (F takes precedence.)
B23B  31/20  G	4	1	3C032	B23B  31/20	265	ơѥ꡼֤ΰưˤꥳåȤ̷¤ΡեʥåȤˤΤ͡ʣȣߡ	Collet shrinked by moving the tapered sleeve (excluding the use of the tightening nut) (H11 newly provided)
B23B  31/20  B	4	1	3C032	B23B  31/20	142	ݥĥ̤	Work that penetrates the chuck
B23B  31/20  C	4	2	3C032	B23B  31/20	68	ξüĤ	Tightening members provides on both ends
B23B  31/20  D	4	0	3C032	B23B  31/20	209	ݥ¤Ļ	Holding of the work inner surface
B23B  31/20  H	4	1	3C032	B23B  31/20	263	ơѥΰưˤꥳåȤȷ¤Ρʣȣߡ	Collet expanded by moving the tapered cone (H11 newly provided)
B23B  31/20  E	4	0	3C032	B23B  31/20	275	ĥΡ㡥η	Collet body, e.g. material, mortar shape
B23B  31/20  F	4	0	3C032	B23B  31/20	717		for the tool
B23B  31/20  Z	4	0	3C032	B23B  31/20	127	¾	Others
B23B  31/22  \	4	4	3C032	B23B  31/22	17	Υ硼	Jaws in the form of balls
B23B  31/22  A	4	0	3C032	B23B  31/22	41	ơѾۥŬѤΡʣȣߡ	suitable for the tapered holder (H11 newly provided)
B23B  31/22  B	4	0	3C032	B23B  31/22	19	ѡʣȣߡ	for the work (H11 newly provided)
B23B  31/22  C	4	0	3C032	B23B  31/22	45	ܡʳηѤΡʣȣߡ	using an engaging member other than the ball (H11 newly provided)
B23B  31/22  Z	4	0	3C032	B23B  31/22	267	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/24  \	2	2	3C032	B23B  31/24	141	Ĥ߼ʤα˼ȤƴϢ빽ħȤ	characterised by features relating primarily to remote control of the gripping means
B23B  31/26  \	3	3	3C032	B23B  31/26	186	ù缴̤뵡ŪưʤѤ	using mechanical transmission through the working-spindle
B23B  31/28  \	3	3	3C032	B23B  31/28	116	åŵŪޤϼŪʤѤ	using electric or magnetic means in the chuck
B23B  31/30  \	3	3	3C032	B23B  31/30	46	åήΰϼʤѤ	using fluid-pressure means in the chuck
B23B  31/30  A	3	0	3C032	B23B  31/30	645	å˥ͭΡʣȣߡ	Cylinder provided inside the chuck (H11 newly provided)
B23B  31/30  Z	3	0	3C032	B23B  31/30	167	¾ʣȣߡ	Others (H11 newly provided)
B23B  31/32  \	2	2	3C032	B23B  31/32	155	ե˻٤줿硼Ĥ	with jaws carried by diaphragm
B23B  31/34  \	2	2	3C032	B23B  31/34	57	ʪžޤϷưǤʤĤ	with means enabling the workpiece to be reversed or tilted
B23B  31/36  \	2	2	3C032	B23B  31/36	6	ù缴˴ؤƥåĴ᤹뤿μʤĤ	with means for adjusting the chuck with respect to the working-spindle
B23B  31/36  A	2	0	3C032	B23B  31/36	189	եƥ󥰥ḁ̊ա	Floating chuck (with the centre)
B23B  31/36  B	2	0	3C032	B23B  31/36	71	ηϳٰĴ˴ؤΡ̿Ф͡ʣȣߡ	related to adjustment of the tool radial direction or angular position (centring) (H11 newly provided)
B23B  31/36  C	2	0	3C032	B23B  31/36	83	пֲùΤ˷ĴǤΡʣȣߡ	adjustable in the radial direction for machining of the work's eccentric position (H11 newly provided)
B23B  31/36  D	2	1	3C032	B23B  31/36	19	󥯥ե	for the crank shaft
B23B  31/36  Z	2	0	3C032	B23B  31/36	61	¾㡥пĴĥ	Others, e.g. eccentricity adjusting chuck
B23B  31/38  \	2	2	3C032	B23B  31/38	34	٥åĤ	with overload clutches
B23B  31/39  \	2	2	3C032	B23B  31/39	113	硼֡Σ	Jaw changers [5]
B23B  31/40  \	1	1	3C032	B23B  31/40	402	ѥ󥷥ޥɥ	Expansion mandrels
B23B  31/42  \	2	2	3C032	B23B  31/42	7	Ĥ߼ʤα˼ȤƴϢ빽ħȤ	characterised by features relating primarily to remote control of the gripping means
B23B  33/00  \	0	0	3C032	B23B  33/00	8	ưΡư󥿡Ρå㡥󤷶	Drivers; Driving centres; Nose clutches, e.g. lathe dogs
B23B  33/00  A	0	0	3C032	B23B  33/00	127	ṳ̈򲡰ƶưư󥿡	Driving centre that drives by pressing the end surface
B23B  33/00  B	0	0	3C032	B23B  33/00	117	ݥü˰¸ݥɥ饤С	Work driver that depends on the end shape of the work
B23B  33/00  Z	0	0	3C032	B23B  33/00	146	¾㡥󥿡ݥĥ	Others, e.g. centre chuck
B23B  35/00  \	0	0	3C036	B23B  35/00	1015	椰ޤϷꤢޤܼŪ椰פޤϥܡפλѤɬפȤùΤˡΤ褦ˡȴϢ֤λ	Methods for boring or drilling, or for working essentially requiring the use of boring or drilling machines; Use of auxiliary equipment in connection with such methods
B23B  37/00  \	0	0	3C036	B23B  37/00	162	ĶȤμȿˤ뿶ưѤ椰ʸ﹩ޤϸΤ˿ưԤʤ碌뤳Ȥˤβù㡥Ķȼȿˤ븦££ˡΣ	Boring by making use of vibrations of ultrasonic frequency (working materials by subjecting the grinding tools or the abrading medium to vibration, e.g. grinding with ultrasonic frequency, B24B0001040000)[2006.01]
B23B  39/00  \	0	0	3C036	B23B  39/00	13	Ū椰פޤϥܡסޤ椰ޤϷꤢ֡椰פޤϥܡפȹ礻	General-purpose boring or drilling machines or devices; Sets of boring or drilling machines
B23B  39/00  A	0	0	3C036	B23B  39/00	278	椰װ̡椰˥ĥȴޤ	Boring machine in general (including the boring unit)
B23B  39/00  B	0	1	3C036	B23B  39/00	425	̥إĥħ	Modification of cutting edges of tools (features of the inside of the head &rarr; 29/034)
B23B  39/00  C	0	0	3C036	B23B  39/00	148	ܡݥװ̡̥ɥ˥ĥȴޤ	Driller in general (including the drilling unit)
B23B  39/00  Z	0	0	3C036	B23B  39/00	4	¾	Others
B23B  39/02  \	1	1	3C036	B23B  39/02	51	椰ס椰פӥե饤פȹ礻	Boring machines; Combined horizontal boring and milling machines
B23B  39/04  \	1	1	3C036	B23B  39/04	251	֤Ǥ椰פޤϥܡסäƥޡ󥰤ʤǷ뤿ε	Co-ordinate boring or drilling machines; Machines for making holes without previous marking
B23B  39/06  \	2	2	3C036	B23B  39/06	31	ʪ֤Τ	Equipment for positioning work
B23B  39/08  \	2	2	3C036	B23B  39/08	102	ץΤ֡Σ	Devices for program control[2006.01]
B23B  39/10  \	1	1	3C036	B23B  39/10	16	ưħΡ㡥ήΰư϶ư	characterised by the drive, e.g. by fluid-pressure drive, pneumatic power drive
B23B  39/12  \	1	1	3C036	B23B  39/12	62	饸ܡ	Radial drilling machines
B23B  39/14  \	1	1	3C036	B23B  39/14	172	ɤΤ褦ʰ֤ؤǤɥإåɤޤ椰إåɤưȤΤǤ̤֤ĤΡ㡥ưʤʪ˴ؤ	with special provision to enable the machine or the drilling or boring head to be moved into any desired position, e.g. with respect to immovable work
B23B  39/16  \	1	1	3C036	B23B  39/16	15	ʣĤβù缴äܡסꤢư	Drilling machines with a plurality of working-spindles; Drilling automatons
B23B  39/16  A	1	0	3C036	B23B  39/16	251	ɥֳĴ	Drill pitch adjustment
B23B  39/16  B	1	0	3C036	B23B  39/16	315	¿̥إĥɡͤθ򴹡¿ǹꤵƤʤδޤ	Replacement of the multi-axis tool (including the multi-axis tool for which no tool is identified)
B23B  39/16  C	1	0	3C036	B23B  39/16	38	ȥ󥹥եݷ	Transfer type
B23B  39/16  Z	1	0	3C036	B23B  39/16	267	¾	Others
B23B  39/18  \	2	2	3C036	B23B  39/18	323	ľγФ饤˱äƹʪޤϹ񥭥֤	Setting work or tool carrier along a straight index line
B23B  39/20  \	2	2	3C036	B23B  39/20	196	߷γФ饤˱äƹʪޤϹ񥭥֤Ρåȥܡ	Setting work or tool carrier along a circular index line; Turret head drilling machines
B23B  39/22  \	2	2	3C036	B23B  39/22	129	иإåɥȥå˲ù缴Ĥ	with working-spindles in opposite headstocks
B23B  39/24  \	2	2	3C036	B23B  39/24	21	ץѤ߷פ줿ΡΣ	designed for program control[2006.01]
B23B  39/26  \	1	1	3C036	B23B  39/26	24	ޤϹʪβù֤Ϣ³ʤ餦Ȥˤä椵Ρʤʤ餤֣£ѣ	in which the working position of tool or work is controlled by copying discrete points of a pattern (features of copying devices B23Q 35/02)
B23B  39/28  \	1	1	3C036	B23B  39/28	12	̤ʶ°ṳ̀ŪȤ椰פޤϥܡפȹ礻ʤ⤷̤ʶ°ṳ̀ãʤʤУ£ѣ	Associations of only boring or drilling machines directed to a particular metal-working result (if not producing a particular metal-working result B23Q 39/00)
B23B  41/00  \	0	0	3C036	B23B  41/00	12	βùΤäŬ礵줿椰פޤϥܡסޤ椰ޤϷꤢ֡Τ°	Boring or drilling machines or devices specially adapted for particular work; Accessories specially adapted therefor
B23B  41/00  A	0	0	3C036	B23B  41/00	412	ܡݥס̤ʲùΤΤΡ	Driller (for special machining)
B23B  41/00  B	0	0	3C036	B23B  41/00	319	椰ס̤ʲùΤΤΡ	Boring machine (for special machining)
B23B  41/00  C	0	0	3C036	B23B  41/00	204	¤ù	Spot facing
B23B  41/00  D	0	0	3C036	B23B  41/00	609	ץȴĤηꤢͭΤΡ	Printed board drilling (unique ones)
B23B  41/00  E	0	0	3C036	B23B  41/00	277	ѥפηꤢ̣ͥ	Pipe drilling (41/08 takes precedence.)
B23B  41/00  F	0	0	3C036	B23B  41/00	252	ݤηꤢ	Shape steel drilling
B23B  41/00  G	0	0	3C036	B23B  41/00	60	ܥηꤢ	Button drilling
B23B  41/00  H	0	0	3C036	B23B  41/00	27	̤βù	Ball inner surface machining
B23B  41/00  J	0	0	3C036	B23B  41/00	102	Ϣ³ù̷ꤢùΤߡ	Continuous machining (drilling only)
B23B  41/00  K	0	0	3C036	B23B  41/00	147	ʣù¾ùȴϢ	Composite machining (related other type machining)
B23B  41/00  Z	0	0	3C036	B23B  41/00	156	¾	Others
B23B  41/02  \	1	1	3C036	B23B  41/02	276	椰ꤹΡĻĤ椰ꡤ㡥Ƥޤϥ饤եˤȤ	for boring deep holes; Trepanning, e.g. of gun or rifle barrels
B23B  41/04  \	1	1	3C036	B23B  41/04	139	¿ѷޤϤ¾߷η椰ꤹ	for boring polygonal or other non-circular holes
B23B  41/06  \	1	1	3C036	B23B  41/06	125	߿椰ꤹ	for boring conical holes
B23B  41/08  \	1	1	3C036	B23B  41/08	308	Τޤϥΰϲˤɤ˷椰ꡤꤢޤڤ곫Ρʻ޴ɼĤȴϢ̩ĤΤιޤƣ̣	for boring, drilling, or tapping holes in tubes under fluid or gas pressure (sealing features or operations, combined with placing branch parts F16L 41/04)
B23B  41/10  \	1	1	3C036	B23B  41/10	3	ܥ˷椰ꤹ	for boring holes in steam boilers
B23B  41/12  \	1	1	3C036	B23B  41/12	260	㡥ưåɤƬˤ롤ޤϤ¾Υ󥸥ʤκư̤	for forming working surfaces of cylinders, of bearings, e.g. in heads of driving rods, or of other engine parts
B23B  41/14  \	1	1	3C036	B23B  41/14	23	˾椰ꤹ	for very small holes
B23B  41/16  \	1	1	3C036	B23B  41/16	17	٤̤ķ椰ꤹ	for boring holes with high-quality surface
B23B  43/00  \	0	0	3C036	B23B  43/00	81	ˡκưʬȼ꤫꤫ʤˤ餺Ĥǽ椰ޤϷꤢ֡ʤ⤷̤ʲùΤäŬ礵줿ΤʤУ££	Boring or drilling devices able to be attached to a machine tool, whether or not replacing an operative portion of the machine tool (if specially adapted for particular work B23B 41/00)
B23B  43/02  \	1	1	3C036	B23B  43/02	16	פο˼ĤǽΤΡΣ	to the tailstock of a lathe[2006.01]
B23B  45/00  \	0	0	3C036	B23B  45/00	12	ޤƱͤʻӲǽʥܡס㡥ɥ륬󡨤ΤʡʺưδϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡Ρ£ƣˡΣ	Hand-held or like portable drilling machines, e.g. drill guns; Equipment therefor (details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F 5/00) [4]
B23B  45/00  A	0	0	3C036	B23B  45/00	291	ַٰΤΡ㡥ա	for determining the angular position, e.g. with a level
B23B  45/00  B	0	0	3C036	B23B  45/00	112	¾βùˤŬѲġ̣£ƻȡ	also applicable to another machining instrument (Refer to B 25 F.)
B23B  45/00  C	0	0	3C036	B23B  45/00	237	ã®	Transmission or speed change mechanism
B23B  45/00  Z	0	0	3C036	B23B  45/00	611	¾	Others
B23B  45/02  \	1	1	3C036	B23B  45/02	475	ŵŪϤˤäƶư	driven by electric power
B23B  45/04  \	1	1	3C036	B23B  45/04	122	ήΰϤޤ϶Ϥˤäƶư	driven by fluid-pressure or pneumatic power
B23B  45/06  \	1	1	3C036	B23B  45/06	128	Ϥˤäƶư	driven by man-power
B23B  45/08  \	2	2	3C036	B23B  45/08	68	졼ޤϷݤ˷ꤢ	for drilling rails or profiled stock
B23B  45/10  \	2	2	3C036	B23B  45/10	1	ХεݾΤΤޤϥ٥ȤѤ	by using a fiddle bow or a belt
B23B  45/12  \	2	2	3C036	B23B  45/12	0	åȥ֥졼Ѥ	by using a ratchet brace
B23B  45/14  \	1	1	3C036	B23B  45/14	889	ꤢ֤ݻޤϰ⤹뤿ΡޤϹʪ˼Ĥ뤿μʡʣ££ͥˡ饹ȥ	Means for holding or guiding the drilling device or for securing it to the work (B23B 41/08 takes precedence); Thrust stands
B23B  45/16  \	1	1	3C036	B23B  45/16	31	׷ưβäΡʲžưβä·ưϾ׷⹩£ģˡΣ	with superimposed percussive action (portable percussive machines with superimposed rotation B25D 16/00) [3]
B23B  45/16  A	1	0	3C036	B23B  45/16	52	ưȯʤħ	characterized by the vibration generating means
B23B  45/16  B	1	1	3C036	B23B  45/16	177	ž륯ĥˤ	using a rotary clutch or cam
B23B  45/16  C	1	1	3C036	B23B  45/16	121	ưԥȥˤ	using a reciprocating piston
B23B  45/16  Z	1	0	3C036	B23B  45/16	155	¾	Others
B23B  47/00  \	0	0	3C036	B23B  47/00	7	椰פޤϥܡפΤä߷פ줿¤ħ빽ʬΤ°֡ʲù缴Τμ꡼֣££̹ѣ£ѡ	Constructional features of components specially designed for boring or drilling machines; Accessories therefor (working-spindles, bearing sleeves therefor B23B 19/02; for machine tools in general B23Q)
B23B  47/00  A	0	0	3C036	B23B  47/00	55		Material supply
B23B  47/00  B	0	0	3C036	B23B  47/00	322	ꡤ	Oil supply, lubrication, cooling
B23B  47/00  C	0	0	3C036	B23B  47/00	98	̺֡ȼԤΤΤΡΰ֢åΰ֢Ѣ£ѣ	Safety devices (for the operators; safety devices for feed &rarr; 47/24; safety devices for chucks &rarr; 31/38; machine tools in general &rarr; B23Q11/00)
B23B  47/00  Z	0	0	3C036	B23B  47/00	178	¾	Others
B23B  47/02  \	1	1	3C036	B23B  47/02	5	ư֡֡ʣ££ͥ	Drives; Gearings (B23B 39/10 takes precedence)
B23B  47/02  A	1	0	3C036	B23B  47/02	65	ںﱿư걿ư򶦤椹	Cutting motion and feed motion controlled together
B23B  47/02  Z	1	0	3C036	B23B  47/02	101	¾	Others
B23B  47/04  \	2	2	3C036	B23B  47/04	52	ù缴ž뤿Τ	for rotating the working-spindle
B23B  47/06  \	3	3	3C036	B23B  47/06	85	ŵŪʤˤäƶư	driven essentially by electrical means
B23B  47/08  \	3	3	3C036	B23B  47/08	33	ήΰϤޤ϶Ϥˤäƶư	driven essentially by fluid-pressure or pneumatic power
B23B  47/10  \	4	4	3C036	B23B  47/10	2	ӥޤ¾βž	equipped with turbines or other rotating machines
B23B  47/12  \	4	4	3C036	B23B  47/12	4	ԥȥ	equipped with oscillating pistons
B23B  47/14  \	3	3	3C036	B23B  47/14	65	®֡ž	Change-speed gearings; Reversing gearings
B23B  47/16  \	3	3	3C036	B23B  47/16	53	٥Ȥޤϥư	Belt or chain drives
B23B  47/18  \	2	2	3C036	B23B  47/18	10	ޤϹʪޤϰ᤹Τ	for feeding or retracting tool or work
B23B  47/18  A	2	0	3C036	B23B  47/18	187	ƥĥץեݥ	Step feed
B23B  47/18  B	2	0	3C036	B23B  47/18	227		Feed control
B23B  47/18  C	2	0	3C036	B23B  47/18	232	구̥ȥĥѡɽޤ	Feed regulation (including the stopper and scale indication for regulation)
B23B  47/18  Z	2	0	3C036	B23B  47/18	370	¾	Others
B23B  47/20  \	3	3	3C036	B23B  47/20	33	ŵŪϤˤäƺư	actuated essentially by electric power
B23B  47/22  \	3	3	3C036	B23B  47/22	153	ήΰϤޤ϶Ϥˤäƺư	actuated essentially by fluid-pressure or pneumatic power
B23B  47/24  \	3	3	3C036	B23B  47/24	139	椰ޤϷꤢ»ޤϲ٤ˤĴ	Stops or feed interruption owing to fracture or overload of the boring or drilling tool
B23B  47/26  \	1	1	3C036	B23B  47/26	249	徺ޤϲ߲ǽΥɥإåɤޤϥإåɥȥåΤ	Liftable or lowerable drill heads or headstocks; Balancing arrangements therefor
B23B  47/28  \	1	1	3C036	B23B  47/28	17	ʪѥɥ뼣ʥɥĴޤϰΤ֣££	Drill jigs for workpieces (equipment for setting or guiding the drill B23B 49/00)
B23B  47/28  A	1	0	3C036	B23B  47/28	144	ܡݥѥơݥ֥̥ơݥ֥̣£ѣ	Driller table (tables in general B 23 Q 1/02)
B23B  47/28  Z	1	0	3C036	B23B  47/28	498	¾㡥ץ쥷եĥȡ	Others, e.g. pressure foot
B23B  47/30  \	1	1	3C036	B23B  47/30	144	ù缴˼ĤǽΣİʾβù缴äղŪ֤ӤΤ褦ղŪ֤μĤ	Additional gear with one or more working-spindles attachable to the main working-spindle and mounting the additional gear
B23B  47/32  \	1	1	3C036	B23B  47/32	37	꤬̤ȤΥɥͽФޤϥɥ»ɻߤ뤿	Arrangements for preventing the running-out of drills or fracture of drills when getting through
B23B  47/34  \	1	1	3C036	B23B  47/34	10	줿꤫ڶ֡˼Ĥ줿ڶ˺	Arrangements for removing chips out of the holes made; Chip-breaking arrangements attached to the tool
B23B  47/34  A	1	0	3C036	B23B  47/34	260	줿꤫ڶ̼˲ù塨ù梪£ѣ	Instrument for removing the chip from the prepared hole (mainly after machining; during machining R B 23 Q 11/00)
B23B  47/34  B	1	0	3C036	B23B  47/34	92	̹ۥͤ˼Ĥ줿ڶ˺	Chip crushing device attached to the tool (tool holder)
B23B  47/34  Z	1	0	3C036	B23B  47/34	618	¾	Others
B23B  49/00  \	0	0	3C036	B23B  49/00	18	椰ѤΡɥ֤ޤϰ⤹뤿¬ޤˡȤ֡椰Υɥ»ؼ֡椰ꤵΤοΩ֡ʹ֣£ȣ¬֡ǣ¡	Measuring or gauging equipment on boring machines for positioning or guiding the drill; Devices for indicating failure of drills during boring; Centring devices for holes to be bored (marking-out equipment B25H 7/00; measuring devices, gauges G01B)
B23B  49/00  A	0	0	3C036	B23B  49/00	581	ɥΥݥФַᡤ	Drill alignment or guide for the work
B23B  49/00  B	0	0	3C036	B23B  49/00	125	񥻥ĥƥ󥰼񡤿¬	Tool setting jig, cutting edge measurement
B23B  49/00  C	0	0	3C036	B23B  49/00	167	»׸С̣£ѣȡ	Breakage or wear detection (Refer to B 23 Q 17/09.)
B23B  49/00  D	0	1	3C036	B23B  49/00	37	¿Ŭ礷	suitable for multiple axes
B23B  49/00  E	0	1	3C036	B23B  49/00	69	ܿҤɥܿ	Contactor that contacts the drill
B23B  49/00  F	0	1	3C036	B23B  49/00	32	ɥȥݥϥơݥ֥Ȥܿˤ	Contact between the drill and work or table
B23B  49/00  G	0	1	3C036	B23B  49/00	22	żˤ	using an electromagnetic coil
B23B  49/00  H	0	1	3C036	B23B  49/00	37	ήΰѤ	utilising a fluid pressure
B23B  49/00  J	0	1	3C036	B23B  49/00	68	ؼʤˤΡ̣£ѣȡ	using an optical means (Refer to B 23 Q 17/24.)
B23B  49/00  P	0	1	3C036	B23B  49/00	40	ù򸡽Ф뤳Ȥˤ	Detection of the machined hole
B23B  49/00  Z	0	0	3C036	B23B  49/00	183	¾	Others
B23B  49/02  \	1	1	3C036	B23B  49/02	9	椰귿Ĥޤϥ֥	Boring templates or bushings
B23B  49/02  A	1	0	3C036	B23B  49/02	240	椰귿Ĥޤϥ֥椽Τ	Boring template or bushing itself
B23B  49/02  Z	1	0	3C036	B23B  49/02	172	¾㡥֥ĥ򴹡	Others, e.g. bushing replacement
B23B  49/04  \	1	1	3C036	B23B  49/04	129	ʪ˥󥿷椰ޤϷꤢ	Devices for boring or drilling centre holes in workpieces
B23B  49/06  \	1	1	3C036	B23B  49/06	0	֥졼Хɤޤϥ֥졼饤˥󥰤˷ꤢ	Devices for drilling holes in brake bands or brake linings
B23B  51/00  \	0	0	3C037	B23B  51/00	28	ܡѹ	Tools for drilling machines
B23B  51/00  A	0	0	3C037	B23B  51/00	96	ɥ	Drill
B23B  51/00  E	0	1	3C037	B23B  51/00	55	󥿡ݥɥ	Centre drill
B23B  51/00  F	0	1	3C037	B23B  51/00	37	եĥȥɥ롤ڡݥɥɥ	Flat drill, spade drill
B23B  51/00  G	0	2	3C037	B23B  51/00	81	ڿϸ򴹲ǽʤ	Cutting edge replaceable
B23B  51/00  H	0	1	3C037	B23B  51/00	159	¿ʥɥ	Multi-stage drill
B23B  51/00  J	0	1	3C037	B23B  51/00	2079	ɽʤ	Surface coating or treatment
B23B  51/00  K	0	1	3C037	B23B  51/00	398	ɡޡݥι̥ɥѥĥɤޤ	Land or margin configuration (including the guide pad)
B23B  51/00  L	0	1	3C037	B23B  51/00	583	ڶ¤ι	Chip groove configuration
B23B  51/00  M	0	1	3C037	B23B  51/00	810	ڿϺޤ	Material (including the material of the cutting edge)
B23B  51/00  P	0	1	3C037	B23B  51/00	295		Shank
B23B  51/00  Q	0	2	3C037	B23B  51/00	39	ɽ̣£ѣġơȡ	Indication of size, etc.(see B23Q3/155D, 17/00F)
B23B  51/00  S	0	1	3C037	B23B  51/00	1288	֡¤̣šơȤͥ	Cutting edge position, shape, structure (E, F, and H take precedence.)
B23B  51/00  T	0	2	3C037	B23B  51/00	981	ڿϸ򴹲ǽʤ	Cutting edge replaceable
B23B  51/00  V	0	0	3C037	B23B  51/00	223	ùʪŬ	adapted to the machined object
B23B  51/00  W	0	1	3C037	B23B  51/00	54	ץ饹ĥ	Plastic
B23B  51/00  X	0	1	3C037	B23B  51/00	19	Ρ㡥	Elastic member, e.g. rubber
B23B  51/00  Z	0	0	3C037	B23B  51/00	187	¾㡥໤Ǯ	Others, e.g. boring instrument using friction heat
B23B  51/02  \	1	1	3C037	B23B  51/02	10	ĥȥɥ	Twist drills
B23B  51/02  S	1	0	3C037	B23B  51/02	262	֡¤	Cutting edge position, shape, structure
B23B  51/02  Z	1	0	3C037	B23B  51/02	177	¾	Others
B23B  51/04  \	1	1	3C037	B23B  51/04	15	Ĥ	for trepanning
B23B  51/04  A	1	0	3C037	B23B  51/04	179	ݻϼФ	Core retained or taken out
B23B  51/04  D	1	0	3C037	B23B  51/04	81	ꡤѼ	Lubrication or cooling means
B23B  51/04  E	1	0	3C037	B23B  51/04	119	󥿡ݥԥ󡤥󥿡ݥɥ	Centre pin, centre drill
B23B  51/04  S	1	0	3C037	B23B  51/04	428	֡¤	Cutting edge position, shape, structure
B23B  51/04  T	1	1	3C037	B23B  51/04	138	ڿϸ򴹲ǽʤ	Cutting edge replaceable
B23B  51/04  Z	1	0	3C037	B23B  51/04	318	¾	Others
B23B  51/05  \	2	2	3C037	B23B  51/05	6	ȤĤǤΡΣ	for cutting discs from sheet [4]
B23B  51/05  A	2	0	3C037	B23B  51/05	85	ĤݻϼФ	Disk retained or taken out
B23B  51/05  D	2	0	3C037	B23B  51/05	10	ꡤѼ	Lubrication or cooling means
B23B  51/05  E	2	0	3C037	B23B  51/05	33	󥿡ݥԥ󡤥󥿡ݥɥ	Centre pin, centre drill
B23B  51/05  S	2	0	3C037	B23B  51/05	76	֡¤	Cutting edge position, shape, structure
B23B  51/05  T	2	1	3C037	B23B  51/05	13	ڿϸ򴹲ǽʤ	Cutting edge replaceable
B23B  51/05  Z	2	0	3C037	B23B  51/05	74	¾	Others
B23B  51/06  \	1	1	3C037	B23B  51/06	6	ޤѼʤäɥ	Drills with lubricating or cooling equipment
B23B  51/06  A	1	0	3C037	B23B  51/06	349	ɥ¾ͥ	Gun drill (takes precedence over the others.)
B23B  51/06  B	1	1	3C037	B23B  51/06	79	ڿϸ򴹲ǽʤ	Cutting edge replaceable
B23B  51/06  C	1	0	3C037	B23B  51/06	229	Τνи̷֡֡	Liquid outlet position (hole position)
B23B  51/06  D	1	0	3C037	B23B  51/06	267	ήηϩ	Fluid route
B23B  51/06  E	1	1	3C037	B23B  51/06	56	餻ήϩ	Spiral fluid channel
B23B  51/06  F	1	0	3C037	B23B  51/06	51	ήϩˡ	Fluid channel forming method
B23B  51/06  Z	1	0	3C037	B23B  51/06	97	¾	Others
B23B  51/08  \	1	1	3C037	B23B  51/08	10	ղŪùԤʤιʬޤϹȷ礷ɥ	Drills combined with tool parts or tools for performing additional working
B23B  51/08  A	1	0	3C037	B23B  51/08	156	ݥޤȷ̥ݥޤȤ΢£ģ	coupled with a reamer (reamer mainly used R B 23 D 77/14)
B23B  51/08  C	1	0	3C037	B23B  51/08	156	¤ꡤùȷ	coupled with a spot facing or counter sink machining instrument
B23B  51/08  D	1	1	3C037	B23B  51/08	113	Ĵᡤæǽʤ	Adjustable or settable/removable
B23B  51/08  E	1	2	3C037	B23B  51/08	9	ڿڶ¤Ĵˤ餺Ϣ³	Cutting edge or chip groove continued regardless of adjustment
B23B  51/08  F	1	2	3C037	B23B  51/08	48	ڿݻˤͤߤ᤹	Cutting edge holder screwed in the radial direction
B23B  51/08  G	1	0	3C037	B23B  51/08	33	΢¤ùȷ	coupled with the rear spot facing instrument
B23B  51/08  K	1	0	3C037	B23B  51/08	37	Сγȷ	coupled with the grind stone or abrasive grain
B23B  51/08  L	1	0	3C037	B23B  51/08	37	ե饤ȷ	coupled with the miller
B23B  51/08  Z	1	0	3C037	B23B  51/08	153	¾㡥ĥաХ˥󥰥ɥ	Others, e.g. with a tap, vanishing drill)
B23B  51/10  \	1	1	3C037	B23B  51/10	1	ùѥӥå	Bits for countersinking
B23B  51/10  A	1	0	3C037	B23B  51/10	36	¼ʤĤ	having a depth limitation means
B23B  51/10  B	1	0	3C037	B23B  51/10	86	΢¤¾ͥ	Rear spot facing (takes precedence over the others.)
B23B  51/10  P	1	0	3C037	B23B  51/10	15	ԥ	Guide pin
B23B  51/10  S	1	0	3C037	B23B  51/10	62	ڿϷ	Cutting edge shape
B23B  51/10  T	1	0	3C037	B23B  51/10	47	ڿæ	Cutting edge setting/removal
B23B  51/10  Z	1	0	3C037	B23B  51/10	116	¾	Others
B23B  51/12  \	1	1	3C037	B23B  51/12	203	ɥޤϥåѥץơѥ꡼	Adapters for drills or chucks; Tapered sleeves
B23B  51/14  \	2	2	3C037	B23B  51/14	1	»ɥѥץ	Adapters for broken drills
