B23D   1/00  \	0	0	3C050	B23D   1/00	159	ʿޤϤߤפΤں﹩ùʪбưʿľǤΤ߹Ԥ	Planing or slotting machines cutting by relative movement of the tool and workpiece in a horizontal straight line only
B23D   1/02  \	1	1	3C050	B23D   1/02	170	ùʪݻΰưˤ	by movement of the work-support
B23D   1/04  \	2	2	3C050	B23D   1/04	17	ʪ椬٥åɤ¦ˤΤߤ	with the tool supported only on one side of the bed
B23D   1/06  \	2	2	3C050	B23D   1/06	11	ʪ椬٥åɤξ¦ˤ	with the tool supported on both sides of the bed
B23D   1/08  \	1	1	3C050	B23D   1/08	195	ʪΰưˤ	by movement of the tool
B23D   1/10  \	2	2	3C050	B23D   1/10	30	ʪΰľĴ᤹ʤĤ	with means for adjusting the tool-guide vertically
B23D   1/12  \	3	3	3C050	B23D   1/12	24	ʪ椬٥åȤ¦Τߤˤ	with the tool supported only on one side of the bed
B23D   1/14  \	3	3	3C050	B23D   1/14	7	ʪ椬٥åɤξ¦ˤ	with the tool supported on both sides of the bed
B23D   1/16  \	2	2	3C050	B23D   1/16	1	ʪΰľĴ᤹ʤʤ	without means for adjusting the tool-guide vertically
B23D   1/18  \	1	1	3C050	B23D   1/18	11	ưڹ	cutting on both the forward and the return stroke
B23D   1/20  \	1	1	3C050	B23D   1/20	56	ʪùʪݻ椬¾¾γ٤˲ù뤿̤ˤդ줿⤵Ƥ	with tool-supports or work-supports specially mounted or guided for working in different directions or at different angles; Special purpose machines
B23D   1/22  \	2	2	3C050	B23D   1/22	288	󥴥åȤ䤽ʪʿѤΤΡʥե饤ˤ륤󥴥åȤޤभ£ã	for planing ingots or the like (scrubbing or peeling ingots by milling B23C 3/14)
B23D   1/24  \	2	2	3C050	B23D   1/24	290	̤ʿѤΤΡ㡥򷿤ѤΤ	for planing inner surfaces, e.g. of moulds
B23D   1/26  \	2	2	3C050	B23D   1/26	295	ʿޤϤߤں魯Ρʤ餻ߤں£ģ	for planing edges or ridges or cutting grooves (cutting helical grooves B23D 5/02)
B23D   1/28  \	2	2	3C050	B23D   1/28	17	ں﹩ùʪľʳΡ㡥سԺѤΤ	in which the tool or workpiece is fed otherwise than in a straight line, e.g. for planing profiled stock
B23D   1/30  \	3	3	3C050	B23D   1/30	8	襤֤椵Ρ㡥ˤΡ襤֣£ѣ	in which the direction of feed is controlled by a copying device, e.g. by a pattern (features of copying devices B23Q 35/00)
B23D   3/00  \	0	0	3C050	B23D   3/00	102	ʿޤϤߤפΤں﹩ùʪбưľľޤϷľǹԤ	Planing or slotting machines cutting by relative movement of the tool and workpiece in a vertical or inclined straight line
B23D   3/02  \	1	1	3C050	B23D   3/02	66	ߤѤΤΡʤ餻ߤں£ģ	for cutting grooves (cutting helical grooves B23D 5/02)
B23D   3/04  \	1	1	3C050	B23D   3/04	5	ں﹩ùʪľʳ	in which the tool or workpiece is fed otherwise than in a straight line
B23D   3/06  \	2	2	3C050	B23D   3/06	0	襤֤椵Ρ㡥ˤΡ襤֣£ѣ	in which the direction of feed is controlled by a copying device, e.g. by a pattern (features of copying devices B23Q 35/00)
B23D   5/00  \	0	0	3C050	B23D   5/00	68	ʿޤϤߤפΤں﹩ùʪбưľưʳǹԤ	Planing or slotting machines cutting otherwise than by relative movement of the tool and workpiece in a straight line
B23D   5/02  \	1	1	3C050	B23D   5/02	185	žưľưΤߤˤΡ㡥餻ߤںѤΤ	involving rotary and straight-line movements only, e.g. for cutting helical grooves
B23D   5/04  \	1	1	3C050	B23D   5/04	6	襤֤椵Ρ㡥ˤΡ襤֣£ѣ	controlled by a copying device, e.g. by a pattern (features of copying devices B23Q 35/00)
B23D   7/00  \	0	0	3C050	B23D   7/00	21	ʿޤϤߤפΤʤι¤ˤΤħΤΡʤι¤켫Σ£ѡ	Planing or slotting machines characterised only by constructional features of particular parts (constructional features of these parts <u>per se</u>B23Q)
B23D   7/02  \	1	1	3C050	B23D   7/02	1	ȹ¤ʪ٥å	of frames, of work-table beds
B23D   7/04  \	1	1	3C050	B23D   7/04	1	졨Ϥ	of pillars, of cross-beams
B23D   7/06  \	1	1	3C050	B23D   7/06	144	ݻ	of tool-carrying arrangements
B23D   7/08  \	1	1	3C050	B23D   7/08	13	ʪ	of work-tables
B23D   7/10  \	1	1	3C050	B23D   7/10	18	ưʤζư	of drives for reciprocating parts
B23D   7/12  \	1	1	3C050	B23D   7/12	2	׷ۼޤϥͥ륮	of arrangements for impact damping or regenerating energy
B23D   9/00  \	0	0	3C050	B23D   9/00	23	ưʿ֡ʿ֡ʺư̤δϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡Σ£ƣˡΣ	Hand-operated planing devices; Portable planing apparatus (details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F 5/00) [4]
B23D  11/00  \	0	0	3C050	B23D  11/00	9	ʿޤϤߤ֤Τιʤȸؤ˼դ뤫ݤʤ˼դǤ	Planing or slotting devices able to be attached to a machine tool, whether or not replacing an operative portion of the machine tool
B23D  13/00  \	0	0	3C050	B23D  13/00	224	ں﹩ޤϹۥΤäʿޤϤߤѤΤΡפˤŬѤǤΣ££££ںѤΤΣ£ƣ	Tools or tool holders specially designed for planing or slotting machines (features applicable also to turning-machines B23B 27/00, B23B 29/00; for cutting gear teeth B23F 21/04)
B23D  13/02  \	1	1	3C050	B23D  13/02	18	ٻۥ	Pivotally-mounted holders
B23D  13/04  \	1	1	3C050	B23D  13/04	11	ȹѥۥ	Holders for tool sets
B23D  13/06  \	1	1	3C050	B23D  13/06	43	岼	Devices for lifting or lowering the tool
B23D  15/00  \	0	0	3C039	B23D  15/00	26	ǵޤϤ֤ΤǿϤߤʿԤ˰ư	Shearing machines or shearing devices cutting by blades which move parallel to each other
B23D  15/00  A	0	0	3C039	B23D  15/00	284	ʪʤΤǲù̴ޥĥץݡХꥷݡ	Shear of a particular item (including scrap shear and deburring shear)
B23D  15/00  B	0	1	3C039	B23D  15/00	160	ݥĥݡ̣£ƣȡ	Lead wire cutter (Refer to B 21 F 11/00.)
B23D  15/00  Z	0	0	3C039	B23D  15/00	236	¾	Others
B23D  15/02  \	1	1	3C039	B23D  15/02	132	岼϶˰ư	having both upper and lower moving blades
B23D  15/04  \	1	1	3C039	B23D  15/04	821	ҿϤΤ߰ư	having only one moving blade
B23D  15/06  \	1	1	3C039	B23D  15/06	28	ľΤ	Sheet shears
B23D  15/06  A	1	0	3C039	B23D  15/06	122	ݥʡݥݡ󥰥륷ݡ̷	Corner shear, angle shear, L type shear
B23D  15/06  Z	1	0	3C039	B23D  15/06	221	¾	Others
B23D  15/08  \	2	2	3C039	B23D  15/08	57	ʪʿ⡤㡥ľΤɽ̤ľѤ⡤ǰư	with a blade moved in one plane, e.g. perpendicular to the surface of the sheet
B23D  15/08  A	2	0	3C039	B23D  15/08	36	ʪκư֤Ĵ	Cutter working position adjustment
B23D  15/08  B	2	1	3C039	B23D  15/08	135	ꥢϥȥݥĴ	Clearance or stroke adjustment
B23D  15/08  C	2	1	3C039	B23D  15/08	41	ݥѤĴ	Rake angle adjustment
B23D  15/08  D	2	0	3C039	B23D  15/08	42	ǿϤľΤ̤˿ľʼΤޤǳٰ֤ѹ	Cutter angle position changeable around an axis that is perpendicular to the surface of the plate member
B23D  15/08  Z	2	0	3C039	B23D  15/08	212	¾Τ	Others
B23D  15/10  \	2	2	3C039	B23D  15/10	50	ʪǰưΡ㡥̤̤ü	with a blade moved in a curved surface, e.g. for producing an edge with a curved cross-section
B23D  15/12  \	1	1	3C039	B23D  15/12	242	ư֤ޤϤλֵħ	characterised by drives or gearings therefor
B23D  15/14  \	2	2	3C039	B23D  15/14	241	ΰ䵤ΰˤư	actuated by fluid or gas pressure
B23D  17/00  \	0	0	3C039	B23D  17/00	9	ǵޤϤ֤ΤǿϤ켴濴ưΡʿʪʿԤʼ濴ˤΣ£ģ֣£ģ	Shearing machines or shearing devices cutting by blades pivoted on a single axis (on an axis parallel to the blade B23D 15/10; hand-held devices B23D 29/00)
B23D  17/00  A	0	0	3C039	B23D  17/00	59	ݥĥ	Lead wire cutter
B23D  17/00  Z	0	0	3C039	B23D  17/00	195	¾̹¤ʪѥȢţƣţǣ	Others (structure cutting attachment R E 02 F 3/36 A, E 04 G 23/08)
B23D  17/02  \	1	1	3C039	B23D  17/02	31	ư֤ޤϤλֵħ	characterised by drives or gearings therefor
B23D  17/04  \	2	2	3C039	B23D  17/04	24	žˤư	actuated by a rotary shaft
B23D  17/06  \	2	2	3C039	B23D  17/06	148	ΰ䵤ΰˤư	actuated by fluid or gas pressure
B23D  17/08  \	2	2	3C039	B23D  17/08	127	ưޤ­ưˤСˤư	actuated by hand or foot operated lever mechanism
B23D  19/00  \	0	0	3C039	B23D  19/00	7	ǵޤϤ֤ΤǿϤžפΤΡ໤פˤΣ£ģ	Shearing machines or shearing devices cutting by rotary discs (by friction saw discs B23D 45/00)
B23D  19/00  A	0	0	3C039	B23D  19/00	195	Ϥι¤	Cutting edge structure
B23D  19/00  C	0	0	3C039	B23D  19/00	91	ݥĥ	Lead wire cutter
B23D  19/00  D	0	0	3C039	B23D  19/00	81	Фи뻻׼ǿϤˤǤ	Cutting by a pair of facing cutting edges in a form of abacus beads
B23D  19/00  Z	0	0	3C039	B23D  19/00	165	¾	Others
B23D  19/02  \	1	1	3C039	B23D  19/02	60	ǿϤȲžǱפĤ	having both a fixed shearing blade and a rotary shearing disc
B23D  19/04  \	1	1	3C039	B23D  19/04	0	ưФβžǱפĤ	having rotary shearing discs arranged in co-operating pairs
B23D  19/04  A	1	0	3C039	B23D  19/04	87	Ǳפư	Cutting disk that moves
B23D  19/04  B	1	0	3C039	B23D  19/04	55	Ǳפưʤ	Cutting disk that does not move
B23D  19/04  C	1	1	3C039	B23D  19/04	49	ϤμաĴ	Cutting edge attachment or adjustment
B23D  19/04  Z	1	0	3C039	B23D  19/04	17	¾	Others
B23D  19/06  \	2	2	3C039	B23D  19/06	7	ֳ֤֤¤ʣФǱפƱǤΡ㡥ӾΤαڤޤ¤ѤΤ	with several spaced pairs of shearing discs working simultaneously, e.g. for trimming or making strips
B23D  19/06  A	2	0	3C039	B23D  19/06	456	ɥȥޡ	Side trimmer
B23D  19/06  B	2	1	3C039	B23D  19/06	118	ϤμաĴ	Cutting edge attachment or adjustment
B23D  19/06  C	2	2	3C039	B23D  19/06	61	ϤδֳĴ	Cutting edge pitch adjustment
B23D  19/06  D	2	0	3C039	B23D  19/06	393	ĥ	Slitter
B23D  19/06  E	2	1	3C039	B23D  19/06	171	ϤμĴ̣¤ͥ	Cutting edge attachment or adjustment (19/06 B takes precedence.)
B23D  19/06  F	2	2	3C039	B23D  19/06	55	ϤδֳĴ	Cutting edge pitch adjustment
B23D  19/06  G	2	3	3C039	B23D  19/06	48	ĥݼ缴θ򴹤ˤ	replacing the cutter spindle
B23D  19/06  H	2	3	3C039	B23D  19/06	137	ĥݼ缴οϤΰưˤ	moving the cutting edge on the cutter spindle
B23D  19/06  Z	2	0	3C039	B23D  19/06	33	¾	Others
B23D  19/08  \	1	1	3C039	B23D  19/08	119	üŪΤΡ㡥ڤѤΤΡѤΤ	for special use, e.g. for cutting curves, for chamfering edges
B23D  21/00  \	0	0	3C003	B23D  21/00	671	Ѥ֡ʤˡܤѤΤΣ£ģˡΣ	Machines or devices for shearing or cutting tubes (as additional equipment for deep-drawing presses B21D 24/16) [2006.01]
B23D  21/00  A	0	0	3C003	B23D  21/00	276	Ϥη¤	Cutting edge shape or structure
B23D  21/00  B	0	0	3C003	B23D  21/00	93	Ϥ»ɻߡ̿	Cutting edge breakage prevention or life improvement
B23D  21/00  C	0	0	3C003	B23D  21/00	145	̤β	Cut surface improvement
B23D  21/00  D	0	0	3C003	B23D  21/00	180	Ǥưפˤ뤿κ	Work for easy cutting
B23D  21/00  E	0	0	3C003	B23D  21/00	263	Ǥ¾βùȤȤ߹碌	Combination of cutting and another machining
B23D  21/00  F	0	0	3C003	B23D  21/00	168	ʪ	Cutting of an item similar to a pipe
B23D  21/00  Z	0	0	3C003	B23D  21/00	322	¾	Others
B23D  21/00 510 \	1	1	3C003	B23D  21/00	0	ϸžǵ	Cutting edge rotating cutter
B23D  21/00 510 A	1	0	3C003	B23D  21/00	272	Ϥ	Cutting edge feed
B23D  21/00 510 B	1	1	3C003	B23D  21/00	111	ˤ	Feed by a cam
B23D  21/00 510 C	1	1	3C003	B23D  21/00	86	ͥˤ	Feed by a screw
B23D  21/00 510 D	1	0	3C003	B23D  21/00	237	ɤΥ	Pipe clamping
B23D  21/00 510 E	1	0	3C003	B23D  21/00	122	եݥ	Frame
B23D  21/00 510 Z	1	0	3C003	B23D  21/00	277	¾	Others
B23D  21/00 520 \	1	1	3C003	B23D  21/00	0	ɼžǵ	Pipe rotating cutter
B23D  21/00 520 A	1	0	3C003	B23D  21/00	117	ɤΥĥ	Pipe chucking
B23D  21/00 520 B	1	0	3C003	B23D  21/00	208	ɤβžٻ	Pipe rotation and supporting
B23D  21/00 520 C	1	0	3C003	B23D  21/00	81	ɤζӽ	Pipe supply and removal
B23D  21/00 520 D	1	0	3C003	B23D  21/00	122	Ϥ	Cutting edge feed
B23D  21/00 520 E	1	0	3C003	B23D  21/00	90	ϿϤΰַ	Pipe or cutting edge alignment
B23D  21/00 520 Z	1	0	3C003	B23D  21/00	104	¾	Others
B23D  21/00 530 \	1	1	3C003	B23D  21/00	0	ǵ	Shear
B23D  21/00 530 A	1	0	3C003	B23D  21/00	92	ưǵ	Floating mandrel shear
B23D  21/00 530 B	1	0	3C003	B23D  21/00	179	«ڤǵ	Binding cut-off shear
B23D  21/00 530 Z	1	0	3C003	B23D  21/00	76	¾	Others
B23D  21/02  \	1	1	3C003	B23D  21/02	107	ɤ濴ФľѰʳ̤Ρ㡥ФѤѡž֥ե졼¤	otherwise than in a plane perpendicular to the axis of the tube, e.g. for making mitred cuts, for making bicycle frames
B23D  21/02  A	1	0	3C003	B23D  21/02	50	ɼФ	Diagonal cutting against the pipe axis
B23D  21/02  B	1	0	3C003	B23D  21/02	135	ɼФʿ	Parallel cutting against the pipe axis
B23D  21/02  Z	1	0	3C003	B23D  21/02	76	¾	Others
B23D  21/04  \	1	1	3C003	B23D  21/04	374	žݻĴǵ	Tube-severing machines with rotating tool-carrier
B23D  21/06  \	1	1	3C003	B23D  21/06	38	ưǴ	Hand-operated tube cutters
B23D  21/08  \	2	2	3C003	B23D  21/08	213	ؤĤ	with cutting wheels
B23D  21/08  A	2	0	3C003	B23D  21/08	141	ϼݥ	Cutting edge or receiving roller feed
B23D  21/08  B	2	0	3C003	B23D  21/08	134	եݥ	Frame
B23D  21/08  Z	2	0	3C003	B23D  21/08	183	¾	Others
B23D  21/10  \	2	2	3C003	B23D  21/10	109	žϰʳǿϤ乩Ĥ	with other cutting blades or tools
B23D  21/10  A	2	0	3C003	B23D  21/10	71	ϼݥ	Cutting edge or receiving roller feed
B23D  21/10  B	2	0	3C003	B23D  21/10	81	եݥ	Frame
B23D  21/10  Z	2	0	3C003	B23D  21/10	110	¾	Others
B23D  21/12  \	3	3	3C003	B23D  21/12	0	׷⤹ͭ	with provision for hammering on the tool
B23D  21/14  \	1	1	3C003	B23D  21/14	217	̤	cutting inside the tube
B23D  21/14  A	1	0	3C003	B23D  21/14	106	ǵδؤθ	Fastening the cutter inside the pipe
B23D  21/14  B	1	0	3C003	B23D  21/14	85	Ϥδɼΰַ	Cutting edge alignment in the pipe axial direction
B23D  21/14  C	1	0	3C003	B23D  21/14	186	Ϥ	Cutting edge feed
B23D  21/14  D	1	0	3C003	B23D  21/14	70	եݥ	Frame
B23D  21/14  Z	1	0	3C003	B23D  21/14	170	¾	Others
B23D  23/00  \	0	0	3C039	B23D  23/00	25	줿ǺΤ֡ʼ֣£ģ	Machines or devices for shearing or cutting profiled stock (hand-held devices B23D 29/00)
B23D  23/00  A	0	0	3C039	B23D  23/00	505	Τ	bar or wire member shearing
B23D  23/00  B	0	0	3C039	B23D  23/00	341	Τ	Shape member shearing
B23D  23/00  C	0	0	3C039	B23D  23/00	166	ȥߥ󥰡㡥ץ쥹ʤΥ֥Υĥȡʣ£ģȡˡ	Trimming, e.g. pressed moulded item blank part cutting (Refer to B 21 D 24/16.)
B23D  23/00  Z	0	0	3C039	B23D  23/00	72	¾	Others
B23D  23/02  \	1	1	3C039	B23D  23/02	26	ǺμľѰʳ̤Ǥ	otherwise than in a plane perpendicular to the axis of the stock
B23D  23/04  \	1	1	3C039	B23D  23/04	35	ξ¦֤졤ǺˤͤϤ򵯤ݻ	by means of holding-dies, arranged side by side, subjecting the stock to torsional stress
B23D  25/00  \	0	0	3C039	B23D  25/00	8	֤ΤǺबʳΡʤǵΤǺबʳΤäŬ֣£ģǺΤߤ£ãˡΣ	Machines or arrangements for shearing stock while the latter is travelling otherwise than in the direction of the cut (control arrangements specially adapted for machines for shearing stock while the latter is travelling otherwise than in the direction of the cut B23D 36/00; controlling slack in travelling flexible stock B21C 47/10) [2]
B23D  25/00  A	0	0	3C039	B23D  25/00	126	ɥϤȸϤȤˤ	using the drum cutting edge and stationary cutting edge
B23D  25/00  B	0	0	3C039	B23D  25/00	36	ľѤμΤޤžǿϤˤ	Using the cutting edge that rotates around the axis which is perpendicular to the cutting line
B23D  25/00  Z	0	0	3C039	B23D  25/00	36	¾	Others
B23D  25/02  \	1	1	3C039	B23D  25/02	49	ե饤󥰤ǵʣ£ģͥ表ѤΥե饤󥰤ǰ̣£ģ	Flying shearing machines (B23D 25/12 takes precedence; flying shears for cutting in general B26D 1/56)
B23D  25/04  \	2	2	3C039	B23D  25/04	7	ùʪɽưưΡʣ£ģͥ	in which a cutting unit moves bodily with the work while cutting (B23D 25/06 takes precedence)
B23D  25/04  A	2	0	3C039	B23D  25/04	377	ɽưͭ	Follow-up drive source provided
B23D  25/04  B	2	0	3C039	B23D  25/04	75	ɽư̵	Follow-up drive source not provided
B23D  25/04  Z	2	0	3C039	B23D  25/04	10	¾	Others
B23D  25/06  \	2	2	3C039	B23D  25/06	223	ưӤդƤ	having a cutting device mounted on an oscillating lever
B23D  25/08  \	2	2	3C039	B23D  25/08	45	ζưǿϤΩƼդ줿	having two coacting shearing blades mounted independently
B23D  25/10  \	3	3	3C039	B23D  25/10	45	ߤʿưС˼դ줿ܤζư뤱	on co-operating beams moving parallel to each other and attached to lever mechanisms
B23D  25/12  \	1	1	3C039	B23D  25/12	504	ǵΤǿϤưžƹ˼դ줿	Shearing machines with blades on coacting rotating drums
B23D  25/14  \	1	1	3C039	B23D  25/14	26	Ǥ줿ΤˡˤʤΡ㡥Ŵ	without regard to the exact dimensions of the resulting material, e.g. for cutting-up scrap
B23D  25/14  A	1	0	3C039	B23D  25/14	121	ĥץץ쥹ĥȡ̥ĥפ򰵽̤Ĥġϰ̸ǤΡ	Scrap press and cut (scrap that is cut during or after pressing)
B23D  25/14  Z	1	0	3C039	B23D  25/14	220	¾	Others
B23D  27/00  \	0	0	3C039	B23D  27/00	102	˥֥󥰱ư	Machines or devices for cutting by a nibbling action
B23D  27/02  \	1	1	3C039	B23D  27/02	46	֡ʺư̤δϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡Σ£ƣˡΣ	Hand-held devices (details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F 5/00) [4]
B23D  27/04  \	2	2	3C039	B23D  27/04	56	ϤǶư	actuated by electric power
B23D  27/06  \	2	2	3C039	B23D  27/06	19	ΰ䵤ΰˤư	actuated by fluid or gas pressure
B23D  29/00  \	0	0	3C039	B23D  29/00	11	°Ǥޤ֡ʥ˥֥󥰱ưˤΣ£ģǰʳμư°֣£¡	Hand-held metal-shearing or metal-cutting devices (with nibbling action B23D 27/02; hand-operated devices for metal-cutting otherwise than by shearing B26B)
B23D  29/00  A	0	0	3C039	B23D  29/00	275	ϥ磻	for bar or wire member cutting
B23D  29/00  B	0	0	3C039	B23D  29/00	50	ľ	for plate member cutting
B23D  29/00  Z	0	0	3C039	B23D  29/00	70	¾	Others
B23D  29/02  \	1	1	3C039	B23D  29/02	6	ư°	Hand-operated metal-shearing devices
B23D  29/02  A	1	0	3C039	B23D  29/02	276	ϥ磻	for bar or wire member cutting
B23D  29/02  D	1	1	3C039	B23D  29/02	87	ĥϵĤ	having a ratchet or hydraulic booster mechanism
B23D  29/02  B	1	0	3C039	B23D  29/02	186	ľ	for plate member cutting
B23D  29/02  C	1	0	3C039	B23D  29/02	148	̤ӤŬΡ㡥ʥĥȳѡںѡ	adapted to a special application, e.g. for nut cutting, key cutting, shape member
B23D  29/02  Z	1	0	3C039	B23D  29/02	76	¾̥ѥѲڤϢ£¡	Others (pipe force-cutting blade R B 26 B)
B23D  31/00  \	0	0	3C039	B23D  31/00	4	ǵޤϤ֤Τ£ģ£ģ˴ޤޤʤΤȣİʾΥ롼פˤޤΡʣ礻ǵ	Shearing machines or shearing devices covered by none or more than one of the groups B23D 15/00-B23D 29/00; Combinations of shearing machines
B23D  31/00  A	0	0	3C039	B23D  31/00	63	ʣ礻ǵñΤ֡	Composite shear (single-unit device)
B23D  31/00  B	0	1	3C039	B23D  31/00	106	βùʣĽιˤԤ	A type of machining performed by tools at multiple positions
B23D  31/00  Z	0	0	3C039	B23D  31/00	126	¾	Others
B23D  31/02  \	1	1	3C039	B23D  31/02	84	ǺʣǤܤΡ㡥ƳǤƱ˹Ԥ	for performing different cutting operations on travelling stock, e.g. slitting and severing simultaneously
B23D  31/04  \	1	1	3C039	B23D  31/04	69	ǺαڤȶΤҤڤ֤ȹ碌	for trimming stock combined with devices for shredding scrap
B23D  33/00  \	0	0	3C051	B23D  33/00	13	ǵޤϤѤ°ʡǵؤǺζӽ£ģ	Accessories for shearing machines or shearing devices (feeding stock to machines or removing stock B21D 43/00)
B23D  33/00  A	0	0	3C051	B23D  33/00	113	̵֡ȼԤݸ	Safety device (machine and operator protection)
B23D  33/00  B	0	0	3C051	B23D  33/00	153	ʤڶʬΥߤʬΥޤ	Separating the tip from the product (including separation between products)
B23D  33/00  C	0	0	3C051	B23D  33/00	147	ɤǸꡤӽС̤ޤ	Feed and unloading after bar or pipe cutting (including sorting)
B23D  33/00  D	0	0	3C051	B23D  33/00	267	ġݥȤǸӽС̢¡͡ǻݻ뵡ǽͭ΢¡	Feed and unloading after plate or sheet cutting (sorting R B) (having a function of holding during cutting provided R 33/02 B)
B23D  33/00  E	0	0	3C051	B23D  33/00	51	ǸӽС̤ޤ	Feed and unloading after wire member cutting (including sorting)
B23D  33/00  F	0	0	3C051	B23D  33/00	155	Ǹν	Integration after cutting
B23D  33/00  G	0	0	3C051	B23D  33/00	119	ǸΥִ̥֤δꢪ£ȣ°Ӥδ衦ᤷ£ã	Web take-up after cutting (web take-up R B 65 H 18; metal band take-up/rewind R B 21 C 47)
B23D  33/00  H	0	0	3C051	B23D  33/00	495	ڶΰ	Chip handling
B23D  33/00  J	0	0	3C051	B23D  33/00	45	ܺννޤ	Irregular size member handling (including processing before cutting)
B23D  33/00  K	0	0	3C051	B23D  33/00	156	Ǥưפˤ뤿κνǵι	Material processing or cutter configuration for easy cutting
B23D  33/00  L	0	0	3C051	B23D  33/00	134	ʪ̤֡ǿϸѥפĥۥڡ	Cutter replacing device (holder having a shear blade fastening clamp R 35/00 Z)
B23D  33/00  Z	0	0	3C051	B23D  33/00	225	¾	Others
B23D  33/02  \	1	1	3C051	B23D  33/02	11	ùʪùݻ⤷ޤ뤿Τ	Arrangements for holding, guiding, or feeding work during the operation
B23D  33/02  A	1	0	3C051	B23D  33/02	400	ɤ˴ؤ	related to the bar or pipe
B23D  33/02  B	1	0	3C051	B23D  33/02	798	ݥȡĤ˴ؤΡݻʤӽ֢ġ	related to the sheet or plate (unloading device that does not hold the member during cutting R 33/00 D)
B23D  33/02  C	1	0	3C051	B23D  33/02	189	˴ؤ	related to the wire member
B23D  33/02  Z	1	0	3C051	B23D  33/02	100	¾̷ݤʤɡ	Others (shape steel, etc.)
B23D  33/04  \	2	2	3C051	B23D  33/04	12	߷Ǥ뤿Τ	for making circular cuts
B23D  33/06  \	2	2	3C051	B23D  33/06	2	襤֤椵Ρ㡥ˤΡ襤֣£ѣ	in which the direction of feed is controlled by a copying device, e.g. by a pattern (features of copying devices B23Q 35/00)
B23D  33/08  \	1	1	3C051	B23D  33/08	10	ѥåɡϼġդ	Press-pads; Counter-bases; Hold-down devices
B23D  33/08  A	1	0	3C051	B23D  33/08	207	ѥĥ	Retaining pad
B23D  33/08  B	1	0	3C051	B23D  33/08	170	ġ̿ϼ	Receiving plate (blade holding stand)
B23D  33/08  Z	1	0	3C051	B23D  33/08	38	¾	Others
B23D  33/10  \	1	1	3C051	B23D  33/10	8	ùʪַ	Stops for positioning work
B23D  33/10  A	1	0	3C051	B23D  33/10	694	ȥĥ	Mechanical stopper
B23D  33/10  B	1	0	3C051	B23D  33/10	308	̰֤֡梪ǣģ	Stop control device (position control R G 05 D 3)
B23D  33/10  C	1	0	3C051	B23D  33/10	91	ȥĥ	Bi-directional stopper
B23D  33/10  Z	1	0	3C051	B23D  33/10	37	¾㡥ַԥ	Others, e.g. alignment pin
B23D  33/12  \	1	1	3C051	B23D  33/12	85	ǸĽؼ	Equipment for indicating where to cut
B23D  35/00  \	0	0	3C051	B23D  35/00	107	ǵޤϤѤι񡨤ǿϤΥۥå	Tools for shearing machines or shearing devices; Holders or chucks for shearing tools
B23D  35/00  A	0	0	3C051	B23D  35/00	173	̱ľݿϢ£ģ	Tool (disc type shear blade R B 23 D 19/00)
B23D  35/00  B	0	1	3C051	B23D  35/00	160	ľΥĥĤΡ̱߼˥ĥĤ΢	having a linear edge (having an edge on the circumference R 19/00)
B23D  35/00  C	0	1	3C051	B23D  35/00	77	߸ޤΥĥĤΡ㥳ݥʡݥ	having an arc type or polygonal line type edge, e.g. for the corner shear
B23D  35/00  D	0	1	3C051	B23D  35/00	135	ʪγŬ礵ĥĤΡ㷿ѡ̥ץ쥹ѡ	having an edge adapted to the external shape of the cutting object, e.g. for shape steel cutting (for press moulded item cutting)
B23D  35/00  E	0	0	3C051	B23D  35/00	142	ǿѥۥݤʤʪϥ̥֡ĥޤࡨľʪѢ	Cutting edge holder i.e. cutter mounting stand or clamping device (including the chuck; for disc type cutter R 19/00)
B23D  35/00  Z	0	0	3C051	B23D  35/00	54	¾㡥򴹡	Others, e.g. tool replacement
B23D  36/00  \	0	0	3C044	B23D  36/00	8	ǵޤǵޤϵפΤǺबʳΤäŬ֡Σ	Control arrangements specially adapted for machines for shearing or similar cutting, or for sawing, stock while the latter is travelling otherwise than in the direction of the cut [2]
B23D  36/00 501 \	1	1	3C044	B23D  36/00	1		Control in general
B23D  36/00 501 A	1	0	3C044	B23D  36/00	60	ݥ桤ĥ	Loop control, tension control
B23D  36/00 501 B	1	0	3C044	B23D  36/00	18	Τ	Material sampling
B23D  36/00 501 C	1	1	3C044	B23D  36/00	127	ľŪʤ	Linear type
B23D  36/00 501 D	1	1	3C044	B23D  36/00	76	ʿŪʤ	Plane type
B23D  36/00 501 E	1	0	3C044	B23D  36/00	11	ܥݥ	Regular size roll
B23D  36/00 501 F	1	0	3C044	B23D  36/00	38	üʿ̷Ǥ	Cutting to a special plane shape
B23D  36/00 501 G	1	0	3C044	B23D  36/00	37	֤˿ư	Means of moving the blade to the cutting operation position
B23D  36/00 501 H	1	0	3C044	B23D  36/00	6	ΰưˤư򳫻ϤʤĤ	having a means that allows the cutter's cutting operation by moving the material
B23D  36/00 501 J	1	0	3C044	B23D  36/00	54	ζ뤪ĻȤϢưԤ	Correlated actions of material supply and holding
B23D  36/00 501 Z	1	0	3C044	B23D  36/00	169	¾	Others
B23D  36/00 502 \	1	1	3C044	B23D  36/00	4	ȺȤϢưԤʤΡʥȥĥѤˤ棳	Correlated actions of the blade and material supply (stop control by the stopper 33/10)
B23D  36/00 502 A	1	0	3C044	B23D  36/00	40	ŵŪ˴ϢưԤ	Electrical correlated actions
B23D  36/00 502 B	1	0	3C044	B23D  36/00	41	Ū˴ϢưԤ	Mechanical correlated actions
B23D  36/00 502 C	1	0	3C044	B23D  36/00	54	¦ʤư	Control means on the material supply means that drives the cutter
B23D  36/00 502 D	1	1	3C044	B23D  36/00	104	¬ݥˤĤ椹	Control by the measurement roll
B23D  36/00 502 E	1	2	3C044	B23D  36/00	41	¬ɻ	Measurement error prevention
B23D  36/00 502 F	1	1	3C044	B23D  36/00	57		Quantitative cutting
B23D  36/00 502 G	1	1	3C044	B23D  36/00	109	¸ߤ̵ͭ˱ȿʡ㡥üΤ椹	Control means that reacts presence/absence of the material, e.g. control by detecting the end
B23D  36/00 502 H	1	2	3C044	B23D  36/00	80	ΤƷ¬򳫻Ϥ	Measurement started by detection
B23D  36/00 502 J	1	0	3C044	B23D  36/00	17	ϿݻˤĤ椵Ĥ	having a cutter controlled by scanning the record holder
B23D  36/00 502 K	1	1	3C044	B23D  36/00	44	ޡݥΤ椹	Control by mark detection
B23D  36/00 502 L	1	1	3C044	B23D  36/00	77	üηΤ椹	Control by end shape detection
B23D  36/00 502 M	1	1	3C044	B23D  36/00	79	Τ椹	Control by defect detection
B23D  36/00 502 Z	1	0	3C044	B23D  36/00	14	¾	Others
B23D  36/00 503 \	1	1	3C044	B23D  36/00	0	ǺǤ֤˼դ줿̤	Special control device attached to a device that cuts the material being fed
B23D  36/00 503 A	1	0	3C044	B23D  36/00	6	žɥॷݤ	Rotary drum shear control
B23D  36/00 503 B	1	1	3C044	B23D  36/00	77	ŵŪ	Electrical control
B23D  36/00 503 C	1	2	3C044	B23D  36/00	120	®򤹤	Speed control
B23D  36/00 503 D	1	3	3C044	B23D  36/00	25	®ΨѤ	Changing the acceleration rate
B23D  36/00 503 E	1	1	3C044	B23D  36/00	19	Ū	Mechanical control
B23D  36/00 503 F	1	2	3C044	B23D  36/00	43	ƱĴ	Synchronisation or phase control
B23D  36/00 503 G	1	1	3C044	B23D  36/00	22	ʪ߰	Cutter stop position control
B23D  36/00 503 H	1	0	3C044	B23D  36/00	71	ե饤󥰤ǵŵŪ̽žɥॷݡ	Electrical control of the flying shear (excluding the rotary drum shear)
B23D  36/00 503 J	1	0	3C044	B23D  36/00	24	ߥĥȵ	Mis-cutting mechanism
B23D  36/00 503 Z	1	0	3C044	B23D  36/00	11	¾	Others
B23D  37/00  \	0	0	3C050	B23D  37/00	56	֥פޤϤ	Broaching machines or broaching devices
B23D  37/02  \	1	1	3C050	B23D  37/02	9	֥פΤȹ񤬿ʿ֤줿	Broaching machines with horizontally-arranged working tools
B23D  37/04  \	2	2	3C050	B23D  37/04	24	̥֥ù	for broaching inner surfaces
B23D  37/06  \	2	2	3C050	B23D  37/06	21	̥֥ù	for broaching outer surfaces
B23D  37/08  \	1	1	3C050	B23D  37/08	11	֥פΤȹ񤬿ľ֤줿	Broaching machines with vertically-arranged working tools
B23D  37/10  \	2	2	3C050	B23D  37/10	86	̥֥ù	for broaching inner surfaces
B23D  37/12  \	2	2	3C050	B23D  37/12	41	̥֥ù	for broaching outer surfaces
B23D  37/14  \	1	1	3C050	B23D  37/14	42	֥פΤȹ񤬲ž褦֤줿	Broaching machines with rotatably-arranged working tools
B23D  37/16  \	2	2	3C050	B23D  37/16	9	餻ߤΥ֥ù	for broaching helical grooves
B23D  37/18  \	1	1	3C050	B23D  37/18	3	֥פΤȹ̵üΥ٥Ȥ˼դ줿	Broaching machines with working tools mounted on an endless chain or belt
B23D  37/20  \	1	1	3C050	B23D  37/20	2	֥פΤи˺Ȥ	Broaching machines with arrangements for working in opposite directions
B23D  37/22  \	1	1	3C050	B23D  37/22	30	üùѡʣ£ģͥ	for special purposes (B23D 37/14 takes precedence)
B23D  39/00  \	0	0	3C050	B23D  39/00	68	֥פޤϤѤ°	Accessories for broaching machines or broaching devices
B23D  41/00  \	0	0	3C050	B23D  41/00	16	֥פޤϤ֤Τʤι¤ˤΤħΤΡʤʤι¤켫Σ£ѡ	Broaching machines or broaching devices characterised only by constructional features of particular parts (constructional features of these parts <u>per se</u>B23Q)
B23D  41/02  \	1	1	3C050	B23D  41/02	29	ȡùʪٻ	of frames; of work supports
B23D  41/04  \	1	1	3C050	B23D  41/04	82	ݻ	of tool-carrying arrangements
B23D  41/06  \	1	1	3C050	B23D  41/06	41	ùʪζ롤ס賰	of devices for feeding, clamping, or ejecting workpieces
B23D  41/08  \	1	1	3C050	B23D  41/08	53	ư֡	of drives; of control devices
B23D  43/00  \	0	0	3C050	B23D  43/00	113	֥ʻںѣ£ƣ	Broaching tools (for cutting gear teeth B23F 21/26)
B23D  43/02  \	1	1	3C050	B23D  43/02	383	ľưˤΡʣ£ģͥ	for cutting by rectilinear movement (B23D 43/08 takes precedence)
B23D  43/04  \	2	2	3C050	B23D  43/04	117	߼ڿϤĤ	having inserted cutting edges
B23D  43/06  \	1	1	3C050	B23D  43/06	54	žưˤ	for cutting by rotational movement
B23D  43/08  \	1	1	3C050	B23D  43/08	2	̵ü٥Ȥ˼Ĥ줿	mounted on an endless chain or belt
B23D  45/00  \	0	0	3C040	B23D  45/00	14	פޤϤ֤Τ߷໤פĤΡʲžפˤ뤻ǣ£ģ£ģ	Sawing machines or sawing devices with circular saw blades or with friction saw discs (shearing machines with rotary discs B23D 19/00-B23D 25/00)
B23D  45/02  \	1	1	3C040	B23D  45/02	2	߷뤤Ǻबư夵줿	with a circular saw blade or the stock mounted on a carriage
B23D  45/02  A	1	0	3C040	B23D  45/02	237	ݵϤľư	Linear motion of the circular saw blade
B23D  45/02  B	1	1	3C040	B23D  45/02	50	ͤˤư	Motion by the feed screw
B23D  45/02  C	1	1	3C040	B23D  45/02	50	ư°žΤư뤳Ȥˤư	Motion by driving the rotary member attached to the movable stand
B23D  45/02  D	1	0	3C040	B23D  45/02	34	ùʪľư	Linear motion of the machined object
B23D  45/02  Z	1	0	3C040	B23D  45/02	20	¾	Others
B23D  45/04  \	1	1	3C040	B23D  45/04	4	߷뤤ǺबٻСư	with a circular saw blade or the stock carried by a pivoted lever
B23D  45/04  A	1	0	3C040	B23D  45/04	237	ݵϤٻСݤư	Circular saw bladed rocked by a lever supported at a point
B23D  45/04  B	1	1	3C040	B23D  45/04	172	ٻСݤλư	Fulcrum of the one-point supported lever that moves
B23D  45/04  Z	1	0	3C040	B23D  45/04	5	¾	Others
B23D  45/06  \	1	1	3C040	B23D  45/06	51	߷ơ֥β֤줿	with a circular saw blade arranged underneath a stationary work-table
B23D  45/08  \	1	1	3C040	B23D  45/08	27	ľ¦ڿϤΤ	with a ring blade having inside saw teeth
B23D  45/10  \	1	1	3C040	B23D  45/10	172	ʣα߷ˤ	with a plurality of circular saw blades
B23D  45/12  \	1	1	3C040	B23D  45/12	56	߷ˤΤǴΤڤ	with a circular saw blade for cutting tubes
B23D  45/12  A	1	0	3C040	B23D  45/12	65	ùʪž	Machined object that rotates
B23D  45/12  Z	1	0	3C040	B23D  45/12	226	¾	Others
B23D  45/14  \	1	1	3C040	B23D  45/14	12	ǺμФľѰʳ̤ڤΡ㡥Ѥ碌ѤΤ	for cutting otherwise than in a plane perpendicular to the axis of the stock, e.g. for making a mitred cut
B23D  45/14  A	1	0	3C040	B23D  45/14	263	ǿϤλѤΤ	Cutter attitude changeable
B23D  45/14  B	1	0	3C040	B23D  45/14	58	ùʪθħΤ	characterized by fastening of the machined object
B23D  45/14  Z	1	0	3C040	B23D  45/14	20	¾	Others
B23D  45/16  \	1	1	3C040	B23D  45/16	783	֤Ǳ߷Ĥ	Hand-held sawing devices with circular saw blades
B23D  45/18  \	1	1	3C040	B23D  45/18	6	߷פΤǺबʳ˰Ρʾ嵭£ģˡΣ	Machines with circular saw blades for sawing stock while the latter is travelling otherwise than in the direction of the cut (control of such machines B23D 36/00) [2]
B23D  45/20  \	2	2	3C040	B23D  45/20	121	ե饤󥰵סݻ񤬱ưǺ˰ư	Flying sawing machines, the saw carrier of which is reciprocated in a guide and moves with the travelling stock during sawing
B23D  45/22  \	2	2	3C040	B23D  45/22	31	ե饤󥰵פΤݻ񤬥С˻ٻƱ߱ư򤹤	Flying sawing machines with lever-supported saw carrier which moves in a complete circular path
B23D  45/24  \	2	2	3C040	B23D  45/24	9	ե饤󥰵פΤݻ񤬥С˻ٻƱ߸̱ư򤹤	Flying sawing machines with lever-supported saw carrier which oscillates in an arc
B23D  45/26  \	1	1	3C040	B23D  45/26	5	®žפˤΡ໤ǮǺͻǤΡѸﵡ££	with high-speed cutting discs, performing the cut by frictional heat melting the material (grinders for cutting-off B24B 27/06)
B23D  47/00  \	0	0	3C040	B23D  47/00	4	̤ʤι¤ˤΤħͭ߷ĵפޤϤ֡ʤʤι¤ħ켫Σ£ѡư̤δϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡Σ£ƣˡΣ	Sawing machines or sawing devices working with circular saw blades, characterised only by constructional features of particular parts (constructional features of these parts <u>per se</u>B23Q; details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F 5/00) [4]
B23D  47/00  A	0	0	3C040	B23D  47/00	440		Chip handling
B23D  47/00  B	0	0	3C040	B23D  47/00	53	Хɻ	Burr prevention
B23D  47/00  C	0	0	3C040	B23D  47/00	470	Сݡ	Cover, safety device
B23D  47/00  D	0	0	3C040	B23D  47/00	84	ùʪ뤤ϹФǮѡưŪ	Supplementary means such as heating, cooling, vibration, etc. for the machined object or tool
B23D  47/00  E	0	0	3C040	B23D  47/00	206	ĵɿɲ	Disc saw vibration-proofing or sound-proofing
B23D  47/00  F	0	0	3C040	B23D  47/00	10	ʣϤζĴ	Width adjustment of multiple blades
B23D  47/00  Z	0	0	3C040	B23D  47/00	366	¾	Others
B23D  47/02  \	1	1	3C040	B23D  47/02	320	ȡʪơ֥ݻΰⵡ	of frames; of guiding arrangements for work-table or saw-carrier
B23D  47/04  \	1	1	3C040	B23D  47/04	11	ùʪꡤַᡤסž	of devices for feeding, positioning, clamping, or rotating work
B23D  47/04  C	1	0	3C040	B23D  47/04	21		Feed
B23D  47/04  D	1	1	3C040	B23D  47/04	18	ùʪιФΥ	Setting/removal of the machined object to or from the tool
B23D  47/04  E	1	1	3C040	B23D  47/04	241	ùʪεפؤפӽ	Loading of the machine object to the saw machine, unloading from the saw machine
B23D  47/04  F	1	0	3C040	B23D  47/04	454		Clamp
B23D  47/04  G	1	1	3C040	B23D  47/04	15	ϤĴᡤǤ	Clamp force adjustable or controllable
B23D  47/04  H	1	0	3C040	B23D  47/04	141	ȥ֤ϢưΡַᵡͭ	Feed and clamp linked together; alignment mechanism provided
B23D  47/04  Z	1	0	3C040	B23D  47/04	157	¾	Others
B23D  47/06  \	2	2	3C040	B23D  47/06	1	ǺĹΤ	for stock of indefinite length
B23D  47/08  \	1	1	3C040	B23D  47/08	166	߷ùʪФΥ	of devices for bringing the circular saw blade to the workpiece or removing same therefrom
B23D  47/10  \	2	2	3C040	B23D  47/10	86	ΰ䵤ΰˤư	actuated by fluid or gas pressure
B23D  47/12  \	1	1	3C040	B23D  47/12	238	߷ζư	of drives for circular saw blades
B23D  49/00  \	0	0	3C040	B23D  49/00	22	פޤϤ֤ΤưĤΡ㡥ݵ	Machines or devices for sawing with straight reciprocating saw blades, e.g. hacksaws
B23D  49/02  \	1	1	3C040	B23D  49/02	10	ľĵݵפΤľŪ˰⤵ȤΡ㡥Ȥ̤˱äʳŪ	Hacksaw machines with straight saw blades secured to a rectilinearly-guided frame, e.g. with the frame fed stepwise in the plane of the guide
B23D  49/04  \	1	1	3C040	B23D  49/04	21	ľĵݵפΤٻ줿Ȥ	Hacksaw machines with straight saw blades secured to a pivotally-arranged frame
B23D  49/06  \	1	1	3C040	B23D  49/06	12	ľĵݵפΤüӤΤ	Hacksaw machines with straight saw blades for special use
B23D  49/08  \	1	1	3C040	B23D  49/08	55	ѥåɵסʤüΤߤǻٻƤ	Pad-saw machines, i.e. machines in which the blade is attached to a carrier at one end only
B23D  49/10  \	1	1	3C040	B23D  49/10	49	ȼư֤ΤľĤ	Hand-held or hand-operated sawing devices with straight saw blades
B23D  49/11  \	2	2	3C040	B23D  49/11	26	üŪѡ㡥եåȻμΣ	for special purposes, e.g. offset-blade hand saws [5]
B23D  49/12  \	2	2	3C040	B23D  49/12	141	ݵʣ£ģ£ģͥ表ݤĹ⤵ĴǤΣ£ģˡΣ	Hacksaws (B23D 49/11, B23D 49/16 take precedence; bows adjustable in length or height B23D 51/12) [5]
B23D  49/14  \	2	2	3C040	B23D  49/14	178	ѥåɵʣ£ģ£ģͥˡΣ	Pad saws (B23D 49/11, B23D 49/16 take precedence) [5]
B23D  49/16  \	2	2	3C040	B23D  49/16	431	Ϥ伧Ϥ丶ưϤˤưΡʣ£ģͥˡΣ	actuated by electric or magnetic power or prime movers (B23D 49/11 takes precedence) [5]
B23D  51/00  \	0	0	3C040	B23D  51/00	67	̤ʤι¤ˤΤħͭưĵפޤϤ֡ʤʤι¤ħ켫Σ£ѡư̤δϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡Σ£ƣˡΥ֥饹ޤ졤ξüݻ˼դ빩ݻޤ³ʡΣ	Sawing machines or sawing devices working with straight blades, characterised only by constructional features of particular parts (constructional features of these parts <u>per se</u>B23Q; details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F 5/00); Carrying or attaching means for tools, covered by this subclass, which are connected to a carrier at both ends [4]
B23D  51/01  \	1	1	3C040	B23D  51/01	33	ϥɥħͭΡΣ	characterised by the handle [5]
B23D  51/02  \	1	1	3C040	B23D  51/02	82	٥åɡùʪơ֥ݻΰ֡ե졼Σ	of beds; of guiding arrangements for work-tables or saw carriers; of frames [5]
B23D  51/03  \	2	2	3C040	B23D  51/03	3	ĥޤޤꤿ߲ǽʥե졼ͭΡΣ	with extensible or collapsible frames [5]
B23D  51/04  \	1	1	3C040	B23D  51/04	74	ùʪꡤַᡤסž	of devices for feeding, positioning, clamping, or rotating work
B23D  51/06  \	2	2	3C040	B23D  51/06	2	ǺĹΤ	for stock of indefinite length
B23D  51/08  \	1	1	3C040	B23D  51/08	93	ľ¾ι	of devices for mounting straight saw blades or other tools
B23D  51/10  \	2	2	3C040	B23D  51/10	191	ޤϼư	for hand-held or hand-operated devices
B23D  51/12  \	2	2	3C040	B23D  51/12	21	Υ֥饹˴ޤޤ롤ξüݻ˼դ빩ѡ㡥ݤĹ⤵ĴǤ	for use with tools, dealt with in this subclass, which are connected to a carrier at both ends, e.g. bows adjustable in length or height
B23D  51/14  \	3	3	3C040	B23D  51/14	30	³	Attachment of the tool
B23D  51/16  \	1	1	3C040	B23D  51/16	224	ľζư굡㡥	of drives or feed mechanisms for straight tools, e.g. saw blades, or bows
B23D  51/18  \	2	2	3C040	B23D  51/18	61	ΰ䵤ΰˤưΡʣ£ģͥ	actuated by fluid or gas pressure (B23D 51/20 takes precedence)
B23D  51/20  \	2	2	3C040	B23D  51/20	78	֤ĤΡޤǹƨ夲ꤹ̤֤Ĥ	with controlled feed of the tool, or with special arrangements for relieving or lifting the tool on the return stroke
B23D  53/00  \	0	0	3C040	B23D  53/00	88	פޤϤ֤Τ̵üӵĤΡ㡥س	Machines or devices for sawing with strap saw blades which are effectively endless in use, e.g. for contour cutting
B23D  53/02  \	1	1	3C040	B23D  53/02	10	ӵݤؤưʤΡʣ£ģͥ	with stationarily-mounted wheels carrying the strap (B23D 53/06 takes precedence)
B23D  53/04  \	1	1	3C040	B23D  53/04	212	ӵݤؤñĴǽǤǤʤưǽˤޤưǽˤ	with the wheels carrying the strap mounted shiftably or swingingly, other than merely for adjustment
B23D  53/06  \	1	1	3C040	B23D  53/06	98	ưǽޤưǽʥơ֥Ĥ	with shiftable or swinging work-table
B23D  53/08  \	1	1	3C040	B23D  53/08	23	줿Ǻ	for cutting profiled stock
B23D  53/10  \	1	1	3C040	B23D  53/10	11	̵üӵĵ֤Τ˼ĤΡιʤȸؤ뤫ݤʤ	Sawing devices working with strap saw blades able to be attached to a machine tool, whether or not replacing an operative portion of the machine tool
B23D  53/12  \	1	1	3C040	B23D  53/12	91	ޤϼư֤ΤӵĤ	Hand-held or hand-operated sawing devices working with strap saw blades
B23D  55/00  \	0	0	3C040	B23D  55/00	29	ӵĵޤϤ֤Τʤι¤ˤΤħΤΡʤʤι¤켫Σ£ѡ	Sawing machines or sawing devices working with strap saw blades, characterised only by constructional features of particular parts (constructional features of these parts <u>per se</u>B23Q)
B23D  55/00  A	0	0	3C040	B23D  55/00	106		Detection
B23D  55/00  B	0	1	3C040	B23D  55/00	37	ڶʤ	Cutting and bending
B23D  55/00  C	0	1	3C040	B23D  55/00	26	ںϡںｪλ	Cutting force; cutting completion
B23D  55/00  D	0	0	3C040	B23D  55/00	108	ʴк	Measures against sludge
B23D  55/00  Z	0	0	3C040	B23D  55/00	264	¾	Others
B23D  55/02  \	1	1	3C040	B23D  55/02	113	ȡơ֥	of frames; of tables
B23D  55/04  \	1	1	3C040	B23D  55/04	4	ùʪޤϥ	of devices for feeding or clamping work
B23D  55/04  C	1	0	3C040	B23D  55/04	21		Feed
B23D  55/04  D	1	1	3C040	B23D  55/04	57	ùʪιФΥ	Setting/removal of the machined object to or from the tool
B23D  55/04  E	1	1	3C040	B23D  55/04	218	ùʪεפؤפӽ	Loading of the machine object to the saw machine, unloading from the saw machine
B23D  55/04  F	1	0	3C040	B23D  55/04	208		Clamp
B23D  55/04  G	1	1	3C040	B23D  55/04	10	ϤĴᡤǤ	Clamp force adjustable or controllable
B23D  55/04  H	1	0	3C040	B23D  55/04	154	ȥפϢưΡַᵡͭ	Feed and clamp linked together; alignment mechanism provided
B23D  55/04  Z	1	0	3C040	B23D  55/04	51	¾	Others
B23D  55/06  \	1	1	3C040	B23D  55/06	150	ӵζư֡ؤμĤ	of drives for strap saw blades; of wheel mountings
B23D  55/08  \	1	1	3C040	B23D  55/08	4	ӵΰޤ	of devices for guiding or feeding strap saw blades
B23D  55/08  C	1	0	3C040	B23D  55/08	71	ӵϤΰ	Band saw blade guide
B23D  55/08  D	1	1	3C040	B23D  55/08	33	ӵ	for the horizontal band saw machine
B23D  55/08  E	1	2	3C040	B23D  55/08	10	žˤ	using a rotary member
B23D  55/08  F	1	3	3C040	B23D  55/08	82	¦̤򥬥ɤ	guiding the blade side surface
B23D  55/08  G	1	3	3C040	B23D  55/08	71	̤򥬥ɤ	guiding the blade rear surface
B23D  55/08  H	1	2	3C040	B23D  55/08	122	žˤ	using a non-rotary member
B23D  55/08  J	1	0	3C040	B23D  55/08	19	ӵϤ	Band saw blade feed
B23D  55/08  K	1	1	3C040	B23D  55/08	29		Control
B23D  55/08  L	1	2	3C040	B23D  55/08	146	Ϥڹ̡ڹ®٤	Saw blade cutting volume or cutting speed control
B23D  55/08  M	1	3	3C040	B23D  55/08	7	ںɸͤѲʤ	Target value not changed during cutting
B23D  55/08  N	1	3	3C040	B23D  55/08	17	ںɸͤѲ	Target value changed during cutting
B23D  55/08  P	1	2	3C040	B23D  55/08	26	Ϥΰư	Saw blade motion/attitude control
B23D  55/08  Q	1	3	3C040	B23D  55/08	7		Fast feed control
B23D  55/08  R	1	3	3C040	B23D  55/08	44	ߡᤷ	Stop/return control
B23D  55/08  S	1	3	3C040	B23D  55/08	27	ư	Rocking control
B23D  55/08  Z	1	0	3C040	B23D  55/08	12	¾	Others
B23D  55/10  \	1	1	3C040	B23D  55/10	74	ӵζ֡ʣ£ģͥ表ӵȤ߹ޤ줿Σ£ģ	of devices for tensioning strap saw blades (B23D 55/06 takes precedence; incorporated in the strap B23D 61/12)
B23D  57/00  \	0	0	3C040	B23D  57/00	140	פޤϤ֤Τ롼ף£ģ£ģ˴ޤޤʤ	Sawing machines or sawing devices not covered by one of groups B23D 45/00-B23D 55/00
B23D  57/02  \	1	1	3C040	B23D  57/02	278		with chain saws
B23D  59/00  \	0	0	3C040	B23D  59/00	140	פޤϤѤ°ʡʹνѰ̣£ѣ	Accessories specially designed for sawing machines or sawing devices (lubricating or cooling machine tools in general B23Q 11/12)
B23D  59/02  \	1	1	3C040	B23D  59/02	157	߷Ѥν	Devices for lubricating or cooling circular saw blades
B23D  59/04  \	1	1	3C040	B23D  59/04	2	ľӵѤν	Devices for lubricating or cooling straight or strap saw blades
B23D  59/04  A	1	0	3C040	B23D  59/04	24	ľ	for the linear saw teeth
B23D  59/04  B	1	0	3C040	B23D  59/04	63	ӵ	for the band saw teeth
B23D  59/04  Z	1	0	3C040	B23D  59/04	33	¾	Others
B23D  61/00  \	0	0	3C040	B23D  61/00	46	פޤϤѤιʴɵѹ££ˡΥ	Tools for sawing machines or sawing devices (tools for trepanning B23B 51/04); Clamping devices for these tools
B23D  61/02  \	1	1	3C040	B23D  61/02	22	߷	Circular saw blades
B23D  61/02  A	1	0	3C040	B23D  61/02	168	Ϥμդ	Blade attachment
B23D  61/02  Z	1	0	3C040	B23D  61/02	467	¾	Others
B23D  61/04  \	2	2	3C040	B23D  61/04	601	߼ڿϤĤ	with inserted saw teeth
B23D  61/06  \	3	3	3C040	B23D  61/06	63	򴹼Τ	in exchangeable arrangement
B23D  61/08  \	2	2	3C040	B23D  61/08	1	ľ¦ڿϤΤ	Ring saw blades with internal saw teeth
B23D  61/10  \	2	2	3C040	B23D  61/10	7	Τ˥פ줿ΡפޤĴ	clamped between hubs; Clamping or aligning devices therefor
B23D  61/12  \	1	1	3C040	B23D  61/12	14	ľӵ	Straight saw blades; Strap saw blades
B23D  61/12  A	1	0	3C040	B23D  61/12	212	ľ	Linear saw teeth
B23D  61/12  B	1	0	3C040	B23D  61/12	298	ӵ	Band saw teeth
B23D  61/12  Z	1	0	3C040	B23D  61/12	33	¾	Others
B23D  61/14  \	2	2	3C040	B23D  61/14	187	߼ڿϤĤ	with inserted saw teeth
B23D  61/16  \	3	3	3C040	B23D  61/16	19	򴹼Τ	in exchangeable arrangement
B23D  61/18  \	1	1	3C040	B23D  61/18	503	ü㡥磻䡼磻䡼֤˥ɤ¾γ򤦤	Sawing tools of special type, e.g. wire saw strands, saw blades or saw wire equipped with diamonds or other abrasive particles in selected individual positions
B23D  63/00  \	0	0	3C040	B23D  63/00	161	ʪκʤλž夲֡㡥¤Τ	Dressing the tools of sawing machines or sawing devices for use in cutting any kind of material, e.g. in the manufacture of sawing tools
B23D  63/02  \	1	1	3C040	B23D  63/02	119	ư֤ˤܿ	Setting saw teeth by means of hand-operated devices
B23D  63/04  \	1	1	3C040	B23D  63/04	30	ư֤ˤ߷ľӵܿ	Setting saw teeth of circular, straight, or strap saw blades by means of power-operated devices
B23D  63/06  \	1	1	3C040	B23D  63/06	95	οϤ㡥	Upsetting the cutting edges of saw teeth, e.g. swaging
B23D  63/08  \	1	1	3C040	B23D  63/08	10	Ω	Sharpening the cutting edges of saw teeth
B23D  63/10  \	2	2	3C040	B23D  63/10	100	䤹ݤˤ	by filing
B23D  63/12  \	2	2	3C040	B23D  63/12	1	ˤ	by grinding
B23D  63/12  A	2	0	3C040	B23D  63/12	51	¦̤򸦺魯	Grinding the side surface
B23D  63/12  Z	2	0	3C040	B23D  63/12	271	¾	Others
B23D  63/14  \	3	3	3C040	B23D  63/14	16	߷Ω	Sharpening circular saw blades
B23D  63/14  A	3	0	3C040	B23D  63/14	16	¦̤򸦺魯	Grinding the side surface
B23D  63/14  Z	3	0	3C040	B23D  63/14	234	¾	Others
B23D  63/16  \	2	2	3C040	B23D  63/16	110	ʤۤѺں﹩££	of chain saws (of mortise chain cutters B24B 3/14)
B23D  63/18  \	1	1	3C040	B23D  63/18	31	»κ¦̤ν㡥ˤ	Straightening damaged saw blades; Reconditioning the side surface of saw blades, e.g. by grinding
B23D  63/20  \	1	1	3C040	B23D  63/20	10	ʣ繩ˤλž夲㡥Ω	Combined processes for dressing saw teeth, e.g. both hardening and setting
B23D  65/00  \	0	0	3C040	B23D  65/00	313	ʪκʤ¤	Making tools for sawing machines or sawing devices for use in cutting any kind of material
B23D  65/02  \	1	1	3C040	B23D  65/02	58	ȴǡʿˤ¤	Making saw teeth by punching, cutting, or planing
B23D  65/04  \	1	1	3C040	B23D  65/04	14	ե饤ˤ¤	Making saw teeth by milling
B23D  67/00  \	0	0	3C050	B23D  67/00	15	ž夲ޤϹӤ䤹ݤפȤ֡ʤ䤹ΤĻ֣£ģ	Filing or rasping machines or devices (securing arrangements for files or rasps B23D 71/00)
B23D  67/02  \	1	1	3C050	B23D  67/02	19	ưĤΡ衼˼Ĥ줿	with reciprocating tools, mounted on a yoke or the like
B23D  67/04  \	1	1	3C050	B23D  67/04	55	ưĤΡüΤߤݻˤȤĤ줿	with reciprocating tools, attached to a carrier at one end only
B23D  67/06  \	1	1	3C050	B23D  67/06	57	žĤ	with rotating tools
B23D  67/08  \	1	1	3C050	B23D  67/08	20	̵ü٥Ȥ˼Ĥ줿Ĥ	with tools mounted on an endless chain or belt
B23D  67/10  \	1	1	3C050	B23D  67/10	33	üӤΤΡ㡥Τ䤹ž夲ѡ°	for special use, e.g. for filing keys; Accessories therefor
B23D  67/12  \	1	1	3C050	B23D  67/12	30	ȼưλž夲ȹӤ䤹ݤ֡ʻž夲䤹ȹӤ䤹£ģ	Hand-held or hand-operated filing or rasping devices (hand files or rasps B23D 71/04)
B23D  69/00  \	0	0	3C050	B23D  69/00	19	̤ʤι¤ˤΤħͭž夲ޤϹӤ䤹ݤפޤϤ֡㡥֡ư֡ʤʤι¤ħ켫Σ£ѡư̤δϢ⤿ʤ·ư϶ưκޤǡ㡥󥰡ǣ£ƣˡž夲ޤϹӤ䤹ݤ°ʡʹ˼դΣ£ģˡΣ	Filing or rasping machines or devices, characterised only by constructional features of particular parts, e.g. guiding arrangements, drives (constructional features of these parts per seB23Q;details or components, e.g. casings, bodies, of portable power-driven tools not particularly related to the operation performed B25F0005000000); Accessories for filing or rasping (attached to the tool B23D0071100000)[2006.01]
B23D  69/02  \	1	1	3C050	B23D  69/02	12	깩Ѥΰ	Guiding arrangements for hand tools
B23D  71/00  \	0	0	3C050	B23D  71/00	146	ž夲ޤϹӤ䤹깩񡨤ιγμ¤Ļ֡ʹιۥ£ѣ깩ѤΥϥɥ£ǡ	Filing or rasping tools; Securing arrangements therefor (tool holders for machine tools B23Q 3/00; handles for hand implements B25G)
B23D  71/02  \	1	1	3C050	B23D  71/02	65	ž夲ޤϹӤ䤹ݤפޤϤ	for filing or rasping machines or devices
B23D  71/04  \	1	1	3C050	B23D  71/04	206	ž夲ѻž夲䤹ޤϹӤ䤹ʹξüݻݻ£ģ֣£ģ	Hand files or hand rasps (carrying or attaching means for tools which are connected to a carrier at both ends B23D 51/12; guiding arrangements B23D 69/02)
B23D  71/06  \	2	2	3C050	B23D  71/06	43	θ򴹼ڿϤѤ	using a single interchangeable blade
B23D  71/08  \	2	2	3C050	B23D  71/08	45	ʣθ򴹼ڿϤѤ	using a plurality of interchangeable cutting elements
B23D  71/10  \	1	1	3C050	B23D  71/10	18	ž夲ޤϹӤ䤹Ѥ°ʡ㡥γѤˤùʪ»ɤ	Accessories for filing or rasping tools, e.g. for preventing scoring of workpieces by the edges of the tool
B23D  73/00  \	0	0	3C050	B23D  73/00	29	ž夲䤹ޤϹӤ䤹¤	Making files or rasps
B23D  73/02  \	1	1	3C050	B23D  73/02	2	Ǻͽ㡥ĤФΤäˤ䤹¤Ѥι	Preliminary treatment of blanks, e.g. grinding, polishing, specially adapted for the manufacture of files or rasps
B23D  73/04  \	1	1	3C050	B23D  73/04	23	ž夲䤹ޤϹӤ䤹βùˡȤ֡Σ	Methods or machines for the manufacture of files or rasps [2006.01]
B23D  73/06  \	2	2	3C050	B23D  73/06	64	ͤˤṳ̀ں	Cutting the working surfaces by means of chisels
B23D  73/08  \	2	2	3C050	B23D  73/08	75	ե饤ꡤʿꡤƺꡤܤĤ֥ùˤṳ̀ں	Milling, planing, slotting, knurling, or broaching the working surfaces
B23D  73/10  \	2	2	3C050	B23D  73/10	19	ṳ̀θ	Grinding the working surfaces
B23D  73/12  \	2	2	3C050	B23D  73/12	29	ṳ̀ΩƤȽѤ̤ʹʥɥ֥饹ȤˤΣ£ãå󥰤ˤ䤹Ωƣãƣ	Peculiar procedures for sharpening or otherwise treating the working surfaces (special treatment by sand-blast B24C 1/02; sharpening files by etching C23F 1/06)
B23D  73/14  \	1	1	3C050	B23D  73/14	11	ž夲䤹ޤϹӤ䤹ùѤι°ʡ㡥Τߡݻ	Tools or accessories specially adapted for making files or rasps, e.g. chisels, supporting-frames
B23D  75/00  \	0	0	3C050	B23D  75/00	156	꡼ޡפޤϤ֡ʹݻ£ѣιݻ£ǡ	Reaming machines or reaming devices (tool holders for machine tools B23Q 3/00; handles for hand implements B25G)
B23D  77/00  \	0	0	3C050	B23D  77/00	742	꡼ޡ	Reaming tools
B23D  77/02  \	1	1	3C050	B23D  77/02	166	꡼ޡΤ߼ڿϤĤ	Reamers with inserted cutting edges
B23D  77/04  \	2	2	3C050	B23D  77/04	77	ڿϤľ¤ںĹˤ錄ĴǤ	with cutting edges adjustable to different diameters along the whole cutting length
B23D  77/06  \	1	1	3C050	B23D  77/06	4	꡼ޡΤ̤ǤΡʣ£ģͥ	Reamers with means for compensating wear (B23D 77/04 takes precedence)
B23D  77/08  \	2	2	3C050	B23D  77/08	14	Τʬʬĥ뤳Ȥˤ	by spreading slotted parts of the tool body
B23D  77/10  \	2	2	3C050	B23D  77/10	4	ɾʬ䤵ƤʤΤ礹뤳Ȥˤ	by expanding a tube-like non-slotted part of the tool body
B23D  77/12  \	1	1	3C050	B23D  77/12	63	꡼ޡΤڿϤơѡ󤵤줿	Reamers with cutting edges arranged in tapered form
B23D  77/14  \	1	1	3C050	B23D  77/14	260	üӤΥ꡼ޡ㡥͵βù	Reamers for special use, e.g. for working cylinder ridges
B23D  79/00  \	0	0	3C050	B23D  79/00	7	ʴФ°ùΤ嵭롼פ˴ޤޤʤùˡޤ֡ʣùˤΣ£ģ̩ήκѤˤ°βù£ȡŻҥӡˤǣ£ˣ졼ӡˤΣ£ˣ¾ζ°βù£СѤιݻ£ѣ깩£ǡ	Methods, machines or devices not covered elsewhere, for working metal by removal of material (by combined operations B23D 81/00; working of metal by the action of a high concentration of electric current B23H; cutting by electron-beam B23K 15/00, by laser beam B23K 26/00; other working of metal B23P; tool holders for machine tools B23Q 3/00; handles for hand implements B25G)
B23D  79/00  A	0	0	3C050	B23D  79/00	861	Хꡤ̼¾ʬवʤΡ̥͡ץ饹ĥΥХꢪ£ãФˤХꢪ££γդˤХꢪ£áŲХꢪ£ȣžˤХꢪ£ã¡ⰵĥȤˤХꢪ£ơʪΥХꢪ£ģ	Deburring and chamfering (not otherwise provided for) (plastic deburring &rarr; B29C37; deburring by a grind stone &rarr; B24B9; deburring by spraying abrasive grain &rarr; B24C; electrolytic deburring &rarr; B23H9/02; deburring by a rotary tool &rarr; B23C3/12B; deburing by high-pressure jet &rarr;B26F; deburring of castings &rarr; B22D31/00)
B23D  79/00  B	0	0	3C050	B23D  79/00	48	ݥӥ󥰡̽ڡ	Shaving (excluding tooth cutting)
B23D  79/00  Z	0	0	3C050	B23D  79/00	71	¾	Others
B23D  79/02  \	1	1	3C050	B23D  79/02	60	ùѤεޤ֡פˤɤṳ̤̈ˤꡤѤȤäꡤ̤Ȥ뤳ȣ££ե饤ˤ륤󥴥åȤޤभ£ã	Machines or devices for scraping (turning machines for bevelling, chamfering, or deburring the ends of bars or tubes B23B 5/16; scrubbing or peeling ingots by milling B23C 3/14)
B23D  79/04  \	2	2	3C050	B23D  79/04	34	žĤΡ㡥ư̤λž夲	with rotating cutting-tool, e.g. for smoothing linings of bearings
B23D  79/06  \	2	2	3C050	B23D  79/06	61	ưĤ	with reciprocating cutting-tool
B23D  79/08  \	2	2	3C050	B23D  79/08	106	ư	Hand scraping-implements
B23D  79/10  \	2	2	3C050	B23D  79/10	14	ޤùʪݻ	Accessories for holding scraping tools or work to be scraped
B23D  79/12  \	1	1	3C050	B23D  79/12	7	ʪΤޤ֤ǥӥåȤˤޤϴɤभޤ֤ΤˤΰʳΤΡˤΣ££ˡΣ	Machines or devices for peeling bars or tubes by making use of cutting bits arranged around the workpiece, otherwise than by turning (by turning B23B 5/12) [2]
B23D  79/12  A	1	0	3C050	B23D  79/12	197	ˤभ	Skin peeling by dies
B23D  79/12  Z	1	0	3C050	B23D  79/12	120	¾	Others
B23D  81/00  \	0	0	3C050	B23D  81/00	11	°ùΤΥ֥饹°룲İʾΥᥤ󥰥롼פˤޤΡ¾ζ°ùȤȹ礻£У£У	Methods, machines, or devices for working metal, covered by more than one main group in this subclass (in combination with other metal-working operations B23P 13/00, B23P 23/00)
