B23H   1/00  \	0	0	3C059	B23H   1/00	27	ŲùʤͶήΤ֤줿ŶˤȹʪȤδ֤Ť®Ƿ֤ȤˤäƹԤ°νΣ	Electrical discharge machining, i.e. removing metal with a series of rapidly recurring electrical discharges between an electrode and a workpiece in the presence of a fluid dielectric [4]
B23H   1/00  A	0	0	3C059	B23H   1/00	321	ˡ	Method
B23H   1/00  B	0	0	3C059	B23H   1/00	213		Device
B23H   1/00  Z	0	0	3C059	B23H   1/00	58	¾	Others
B23H   1/02  \	1	1	3C059	B23H   1/02	33	äˤΤŬѤŵϩ㡥϶롤桤ûޤ¾ΰ۾ŤɻߡΣ	Electric circuits specially adapted therefor, e.g. power supply, control, preventing short circuits or other abnormal discharges [4]
B23H   1/02  A	1	0	3C059	B23H   1/02	564	Ÿ	Power supply
B23H   1/02  B	1	1	3C059	B23H   1/02	533	ĥǻҤȣ̣äʻѤΡ㡥ĥǻҤȣ̡	Co-use of the switching device and LC, e.g. switching device and L
B23H   1/02  C	1	1	3C059	B23H   1/02	673	ĥǻҤΤѤΤ	utilising the switching device only
B23H   1/02  D	1	0	3C059	B23H   1/02	695	θС	Signal detection or processing
B23H   1/02  E	1	0	3C059	B23H   1/02	246	ûɻ	Short-circuiting prevention
B23H   1/02  F	1	0	3C059	B23H   1/02	502	ݥ	Servo feed
B23H   1/02  Z	1	0	3C059	B23H   1/02	182	¾	Others
B23H   1/04  \	1	1	3C059	B23H   1/04	5	äˤΤŬѤŶˤޤϤ¤ʣ£ȣͥˡΣ	Electrodes specially adapted therefor or their manufacture (B23H 9/00 takes precedence) [4]
B23H   1/04  A	1	0	3C059	B23H   1/04	100	Ŷ˾פ	Electrode wastage compensation
B23H   1/04  Z	1	0	3C059	B23H   1/04	536	¾	Others
B23H   1/06  \	2	2	3C059	B23H   1/06	272	Ŷ˺Σ	Electrode material [4]
B23H   1/08  \	1	1	3C059	B23H   1/08	255	ùΡΣ	Working media [4]
B23H   1/10  \	1	1	3C059	B23H   1/10	6	ùΤζޤϺΣ	Supply or regeneration of working media [4]
B23H   1/10  A	1	0	3C059	B23H   1/10	245	ʬΰݻźʪκ	Content maintenance or additive mixing
B23H   1/10  Z	1	0	3C059	B23H   1/10	286	¾	Others
B23H   3/00  \	0	0	3C059	B23H   3/00	647	ŲùʤŲ֤줿ŶˤȹʪȤδ֤ήήȤˤäƹԤ°νΣ	Electrochemical machining, i.e. removing metal by passing current between an electrode and a workpiece in the presence of an electrolyte [4]
B23H   3/02  \	1	1	3C059	B23H   3/02	7	äˤΤŬѤŵϩ㡥϶롤桤ûɻߡΣ	Electric circuits specially adapted therefor, e.g. power supply, control, preventing short circuits [4]
B23H   3/02  A	1	0	3C059	B23H   3/02	93	۾︽ݤθС	Fault symptom detection or elimination
B23H   3/02  B	1	0	3C059	B23H   3/02	48	ùθ	Machining condition search
B23H   3/02  C	1	0	3C059	B23H   3/02	71	ַݻ	Gap retention
B23H   3/02  Z	1	0	3C059	B23H   3/02	129	¾	Others
B23H   3/04  \	1	1	3C059	B23H   3/04	13	äˤΤŬѤŶˤޤϤ¤ʣ£ȣͥˡΣ	Electrodes specially adapted therefor or their manufacture (B23H 9/00 takes precedence) [4]
B23H   3/04  A	1	0	3C059	B23H   3/04	147	ϥݥŶˤμդϵŹ¤	Attachment or power supply structure for the tool or work electrode
B23H   3/04  Z	1	0	3C059	B23H   3/04	301	¾	Others
B23H   3/06  \	2	2	3C059	B23H   3/06	42	Ŷ˺Σ	Electrode material [4]
B23H   3/08  \	1	1	3C059	B23H   3/08	165	ùΡΣ	Working media [4]
B23H   3/10  \	1	1	3C059	B23H   3/10	14	ùΤζޤϺΣ	Supply or regeneration of working media [4]
B23H   3/10  A	1	0	3C059	B23H   3/10	238	ù̾ŶǤαն롦۴	Liquid supply or circulation on the machined surface or in the electrode
B23H   3/10  Z	1	0	3C059	B23H   3/10	161	¾	Others
B23H   5/00  \	0	0	3C059	B23H   5/00	5	ʣùΣ	Combined machining [4]
B23H   5/00  A	0	0	3C059	B23H   5/00	21	ŵŪù˵ùʣ礷	Electrical machining plus mechanical machining
B23H   5/00  B	0	1	3C059	B23H   5/00	90	ùʣ礷	plus cylindrical grinding
B23H   5/00  C	0	1	3C059	B23H   5/00	86	ʿ̸ùʣ礷	plus plane grinding
B23H   5/00  D	0	1	3C059	B23H   5/00	58	٥ϥ磻ˤ븦ùʣ礷	plus grinding by the belt or wire
B23H   5/00  E	0	1	3C059	B23H   5/00	25	ۡݥ˥󥰲ùʣ礷	plus honing
B23H   5/00  F	0	1	3C059	B23H   5/00	112	ĥԥ󥰲ùʣ礷	plus wrapping
B23H   5/00  G	0	1	3C059	B23H   5/00	152	Хϥ֥饷ˤùʣ礷	plus machining by the buff or brush
B23H   5/00  H	0	1	3C059	B23H   5/00	327	¾θùʣ礷	plus another grinding
B23H   5/00  J	0	1	3C059	B23H   5/00	158	ʳεùʣ礷Ρ㡥Ųɥĥ󥰡	plus another machining other than grinding, e.g. electrolytic dressing
B23H   5/00  Z	0	0	3C059	B23H   5/00	72	¾	Others
B23H   5/02  \	1	1	3C059	B23H   5/02	77	Ųùȹ蘆줿ŲùΣ	Electrical discharge machining combined with electrochemical machining [4]
B23H   5/04  \	1	1	3C059	B23H   5/04	47	ùȹ蘆줿ŲùΣ	Electrical discharge machining combined with mechanical working [4]
B23H   5/06  \	1	1	3C059	B23H   5/06	155	ù㡥ޤϥۡ˥󥰲ùȹ蘆줿ŲùΣ	Electrochemical machining combined with mechanical working, e.g. grinding or honing [4]
B23H   5/08  \	2	2	3C059	B23H   5/08	191	Ų򸦺Σ	Electrolytic grinding [4]
B23H   5/10  \	1	1	3C059	B23H   5/10	215	äˤΤŬѤŶˤޤϤ¤ʣ£ȣ£ȣͥˡΣ	Electrodes specially adapted therefor or their manufacture (B23H 1/04, B23H 3/04 take precedence) [4]
B23H   5/12  \	1	1	3C059	B23H   5/12	43	ùΡΣ	Working media [4]
B23H   5/14  \	1	1	3C059	B23H   5/14	60	ùΤζޤϺΣ	Supply or regeneration of working media [4]
B23H   7/00  \	0	0	3C059	B23H   7/00	445	ŲùŲù˶ŬѤǤˡޤ֡Σ	Processes or apparatus applicable to both electrical discharge machining and electrochemical machining [4]
B23H   7/02  \	1	1	3C059	B23H   7/02	163	磻䡼åȲùΣ	Wire-cutting [4]
B23H   7/02  A	1	0	3C059	B23H   7/02	415	ùմط	related to the machining liquid
B23H   7/02  B	1	1	3C059	B23H   7/02	352	Υ롤ùΰ	Nozzle, machined area
B23H   7/02  F	1	0	3C059	B23H   7/02	174	ι¤	Machine structure
B23H   7/02  G	1	1	3C059	B23H   7/02	167	ưʬ	Movable part
B23H   7/02  H	1	1	3C059	B23H   7/02	358	ʪݻʬҽޤ	Work holding part (including the core handling)
B23H   7/02  J	1	0	3C059	B23H   7/02	215	°̷֡ù£ƣ	Auxiliary device (bore machining R B 26 F 1/28)
B23H   7/02  K	1	0	3C059	B23H   7/02	278	ùˡ	Machining method
B23H   7/02  M	1	0	3C059	B23H   7/02	124	ü칽¤Ĳù֤ޤˡ	Machining device or method having a special structure
B23H   7/02  N	1	1	3C059	B23H   7/02	55	̲ù	Non-penetrating machining
B23H   7/02  P	1	1	3C059	B23H   7/02	62	ʣʪƱ˲ù	Simultaneous machining of multiple work pieces
B23H   7/02  Q	1	1	3C059	B23H   7/02	240	ʣ磻ŶˤѤΡ̣Фͥ	using multiple wire electrodes (P takes precedence.)
B23H   7/02  R	1	0	3C059	B23H   7/02	1149	С¬ꡦ֤ˡ	Detection, measurement, or control device or method
B23H   7/02  S	1	1	3C059	B23H   7/02	424	Ŭ椹	Adaptive control
B23H   7/02  Z	1	0	3C059	B23H   7/02	213	¾¤ˡʤɡ	Others (manufacturing method, etc.)
B23H   7/04  \	2	2	3C059	B23H   7/04	57	ùַή򶡵뤹֡äˤΤŬѤŵϩΣ	Apparatus for supplying current to working gap; Electric circuits specially adapted therefor [4]
B23H   7/04  D	2	0	3C059	B23H   7/04	82	ʪؤ	Power delivery device for the work
B23H   7/04  E	2	0	3C059	B23H   7/04	122	۾֤θвϩޤ	including the fault state detection circuit
B23H   7/04  Z	2	0	3C059	B23H   7/04	249	¾	Others
B23H   7/06  \	2	2	3C059	B23H   7/06	2	ŶˤȹʪȤδ֤аưηϩΣ	Control of the travel curve of the relative movement between electrode and workpiece [4]
B23H   7/06  A	2	0	3C059	B23H   7/06	218	ơݥѡݥĥ	Tapered cutting
B23H   7/06  B	2	0	3C059	B23H   7/06	39	չ	Regressive control
B23H   7/06  C	2	0	3C059	B23H   7/06	102	ɥĥȡեĥ	Second cutting, offset
B23H   7/06  Z	2	0	3C059	B23H   7/06	319	¾	Others
B23H   7/08  \	2	2	3C059	B23H   7/08	619	磻䡼ŶˡΣ	Wire electrodes [4]
B23H   7/10  \	3	3	3C059	B23H   7/10	24	磻䡼ŶˤλٻޤšΣ	Supporting, winding or electrical connection of wire-electrode [4]
B23H   7/10  A	3	0	3C059	B23H   7/10	442	ư̤ӤΤ	Automatic wire connection, wire passing, and cutting therefor
B23H   7/10  B	3	0	3C059	B23H   7/10	471	ɡ̥ݥФַΤΤΡ¾ϡơ	Guide (for work alignment; Others F)
B23H   7/10  C	3	0	3C059	B23H   7/10	132	ÿǮ	Shaking, heating, pre-treatment
B23H   7/10  D	3	0	3C059	B23H   7/10	236	ĥͿ	Giving a tension
B23H   7/10  E	3	0	3C059	B23H   7/10	260	磻Ŷˤؤ	Power delivery to the wire electrode
B23H   7/10  F	3	0	3C059	B23H   7/10	572	磻ŶˤεӽС̣ͥ	Feed and unloading of the wire electrode (A takes precedence.)
B23H   7/10  Z	3	0	3C059	B23H   7/10	42	¾	Others
B23H   7/12  \	1	1	3C059	B23H   7/12	93	žŶˡΣ	Rotating-disc electrodes [4]
B23H   7/14  \	1	1	3C059	B23H   7/14	2	äˤΤŬѤŵϩ㡥϶Σ	Electric circuits specially adapted therefor, e.g. power supply [4]
B23H   7/14  A	1	0	3C059	B23H   7/14	161	š	Power supply, power delivery
B23H   7/14  Z	1	0	3C059	B23H   7/14	74	¾	Others
B23H   7/16  \	2	2	3C059	B23H   7/16	60	ûޤ¾ΰ۾Ťɻߤ뤿ΤΡΣ	for preventing short circuits or other abnormal discharges [4]
B23H   7/18  \	2	2	3C059	B23H   7/18	62	Ŷˤȹʪ֤˽˾ֳ֤ݻޤ椹뤿ΤΡΣ	for maintaining or controlling the desired spacing between electrode and workpiece [4]
B23H   7/20  \	2	2	3C059	B23H   7/20	561	ץΤΤΡ㡥ŬΣ	for program control, e.g. adaptive[2006.01]
B23H   7/22  \	1	1	3C059	B23H   7/22	7	äˤΤŬѤŶˤޤϤ¤㡥ޤĴʣ£ȣ£ȣ£ȣͥˡΣ	Electrodes specially adapted therefor or their manufacture (B23H 7/08, B23H 7/12, B23H 9/00 take precedence) [4]
B23H   7/22  B	1	0	3C059	B23H   7/22	111	ξǤ	Moulding or modification on the machine
B23H   7/22  C	1	0	3C059	B23H   7/22	125	ơݥס磻ѤŶˡ̥磻䥫ĥȲùϽ	Electrode utilising the tape or wire (excluding wire cutting)
B23H   7/22  Z	1	0	3C059	B23H   7/22	341	¾	Others
B23H   7/24  \	2	2	3C059	B23H   7/24	42	Ŷ˺Σ	Electrode material [4]
B23H   7/26  \	1	1	3C059	B23H   7/26	6	ʪФŶˤưޤϰַ᤹֡ŶˤμդΣ	Apparatus for moving or positioning electrode relatively to workpiece; Mounting of electrode [4]
B23H   7/26  A	1	0	3C059	B23H   7/26	150	ù	Creative machining
B23H   7/26  C	1	0	3C059	B23H   7/26	317	ָС¬	Position detection, measurement
B23H   7/26  D	1	0	3C059	B23H   7/26	156	Ŷ˸	Electrode replacement
B23H   7/26  E	1	0	3C059	B23H   7/26	76	Ŷˤ˿ưä	applying vibration to the electrode
B23H   7/26  Z	1	0	3C059	B23H   7/26	580	¾㡥ն	Others, e.g. attaching instrument
B23H   7/28  \	2	2	3C059	B23H   7/28	284	˿ľʿǤŶˤΰư㡥󤻲ùΣ	Moving electrode in a plane normal to the feed direction, e.g. orbiting [4]
B23H   7/30  \	2	2	3C059	B23H   7/30	249	ǤŶˤΰưʣ£ȣͥˡΣ	Moving electrode in the feed direction (B23H 7/32 takes precedence) [4]
B23H   7/32  \	2	2	3C059	B23H   7/32	76	Ŷˤȹʪν˾ְֳݻΣ	Maintaining desired spacing between electrode and workpiece [4]
B23H   7/34  \	1	1	3C059	B23H   7/34	14	ùΡΣ	Working media [4]
B23H   7/36  \	1	1	3C059	B23H   7/36	5	ùΤζޤϺΣ	Supply or regeneration of working media [4]
B23H   7/36  A	1	0	3C059	B23H   7/36	129	Υη֡	Nozzle shape, layout, configuration
B23H   7/36  B	1	0	3C059	B23H   7/36	47	۰ʮѤĤ	Pot for suction or blast
B23H   7/36  C	1	0	3C059	B23H   7/36	274	ùΤ	Clarification of the machining medium
B23H   7/36  D	1	0	3C059	B23H   7/36	163	̹⤵Ĵƻ	Liquid level height adjustment or monitoring
B23H   7/36  Z	1	0	3C059	B23H   7/36	406	¾	Others
B23H   7/38  \	1	1	3C059	B23H   7/38	4	ľܤˤ϶°νԤʤʡ㡥Ķȡϥ졼̤ŬѤ뤳Ȥˤäƶ°ù˱ƶڤܤΡΣ	Influencing metal working by using specially adapted means not directly involved in the removal of metal, e.g. ultrasonic waves, magnetic fields or laser irradiation[2006.01]
B23H   7/38  A	1	0	3C059	B23H   7/38	43	ä	applying a magnetic field
B23H   7/38  Z	1	0	3C059	B23H   7/38	78	¾	Others
B23H   9/00  \	0	0	3C059	B23H   9/00	9	ζ°оʪ谷ޤ϶°оʪ̤θ̤ޤϷ̤ã뤿äŬѤùʱŤˤǮãģˡΣ	Machining specially adapted for treating particular metal objects or for obtaining special effects or results on metal objects (heat treatment by cathodic discharge C21D 1/38) [4]
B23H   9/00  A	0	0	3C059	B23H   9/00	364	ɽ̽	Surface treatment
B23H   9/00  B	0	0	3C059	B23H   9/00	80	֡ĥβù	Gear or rack machining
B23H   9/00  C	0	0	3C059	B23H   9/00	69	ͤ¡ξΤ餻¤βù	Machining of the groove or spiral groove on a cylindrical member
B23H   9/00  Z	0	0	3C059	B23H   9/00	721	¾	Others
B23H   9/02  \	1	1	3C059	B23H   9/02	161	ȥߥ󥰤ޤϥХνΣ	Trimming or deburring [4]
B23H   9/04  \	1	1	3C059	B23H   9/04	131	ɽ̽Σ	Treating surfaces of rolls [4]
B23H   9/06  \	1	1	3C059	B23H   9/06	77	ޡդޤϹΣ	Marking or engraving [4]
B23H   9/08  \	1	1	3C059	B23H   9/08	71	ԲΣ	Sharpening [4]
B23H   9/10  \	1	1	3C059	B23H   9/10	206	ӥ֥졼ɤޤϥΥβùΣ	Working turbine blades or nozzles [4]
B23H   9/12  \	1	1	3C059	B23H   9/12	100	ʡ㡥ѥӥΣ	Forming parts of complementary shape, e.g. punch-and-die [4]
B23H   9/14  \	1	1	3C059	B23H   9/14	711	Σ	Making holes [4]
B23H   9/16  \	2	2	3C059	B23H   9/16	18	ŲեåȤˤΡΣ	using an electrolytic jet [4]
B23H   9/18  \	1	1	3C059	B23H   9/18	8	߿̤ޤϥѥ¤ʣ£ȣͥˡΣ	Producing external conical surfaces or spikes (B23H 9/08 takes precedence) [4]
B23H  11/00  \	0	0	3C059	B23H  11/00	14	¾ʬवʤ֤ޤϺΣ	Auxiliary apparatus or details, not otherwise provided for [4]
B23H  11/00  A	0	0	3C059	B23H  11/00	157	ɺҡ˴ؤΡ㡥Ⱦ㳲ɻߡ	related to disaster prevention or safety, e.g. electrowave fault prevention
B23H  11/00  Z	0	0	3C059	B23H  11/00	256	¾	Others
