B23P   5/00  \	0	0	3C067	B23P   5/00	103	°ʤؤμդ㡥ؤΥɤμդ	Setting gems or the like on metal parts, e.g. diamonds on tools
B23P   6/00  \	0	0	3C067	B23P   6/00	4	оʪνޤϽʶ°ġ°°ɡ°ץեޤϤ줫줿ʪʤζޤϷβ£ģ£ģ¤ˤ٤ޤ»ʪʤ佤£ģˡΣ	Restoring or reconditioning objects (straightening or restoring form of sheet metal, metal rods, metal tubes, metal profiles, or specific articles made therefrom B21D 1/00, B21D 3/00; repairing defective or damaged objects by casting techniques B22D 19/10) [2006.01]
B23P   6/00  A	0	0	3C067	B23P   6/00	136	佤ࡤ޿ޡ޿ˡ̴޿޼Ρãˡãˡ	Repair member, impregnant, impregnating method (impregnant per se C 08 K, C 09 K)
B23P   6/00  Z	0	0	3C067	B23P   6/00	426	¾	Others
B23P   6/02  \	1	1	3C067	B23P   6/02	12	ԥȥޤϥνޤϽΣ	Pistons or cylinders [3]
B23P   6/04  \	1	1	3C067	B23P   6/04	197	»ޤϤҤ°ʤʡ㡥¤ʪνΣ	Repairing fractures or cracked metal parts or products, e.g. castings [3]
B23P   9/00  \	0	0	3C067	B23P   9/00	109	פޤϾ׷й뤿γȼȼʤɽ̽ޤɽ̻ž夲㡥ӥ㡤ʿޤ̲ùñ¾Υ֥饹ʬवϴطʬ򻲾ȡ㡥£áãģãƣˡ¾ʬव줺嵭Τ褦ɽ̤ħꡤνˡüǤʤ	Treating or finishing surfaces mechanically, with or without calibrating, primarily to resist wear or impact, e.g. smoothing or roughening turbine blades or bearings (treatment covered by a single other subclass, <u>see</u> the relevant subclass, e.g. B24C, C21D 7/00, C22F 1/00); Features of such surfaces not otherwise provided for, their treatment being unspecified
B23P   9/02  \	1	1	3C067	B23P   9/02	199	ðˤޤϻž夲㡥åڤʣ£Уͥ	Treating or finishing by applying pressure, e.g. knurling (B23P 9/04 takes precedence)
B23P   9/04  \	1	1	3C067	B23P   9/04	120	ĤǤޤȿðˤޤϻž夲	Treating or finishing by hammering or applying repeated pressure
B23P  11/00  \	0	0	3C067	B23P  11/00	350	¾ʬवʤ°ùˡˤ°ʤޤ϶°оʪܹޤʬΥʶ°ġ°ɡ°ޤ϶°ץեܹ£ģ٥å£ʡϥդϥΥæܣ£ˡ˶ޤӶܹ礹깩££ޤˤ°ʣƣ£ˡΣ	Connecting or disconnecting metal parts or objects by metal-working techniques, not otherwise provided for (connecting sheet metal or metal tubes, rods or profiles B21D 39/00; riveting B21J; soldering, unsoldering, welding B23K; hand tools for connecting wire or strip B25B 25/00; connecting metal parts by adhesives F16B 11/00) [1,7]
B23P  11/02  \	1	1	3C067	B23P  11/02	7	ĥ˼Ǽ̡ޤϤεդˤΡ㡥ήΤλѤˤΡϤФˤ	by first expanding and then shrinking or <u>vice versa</u>, e.g. by using pressure fluids; by making force fits
B23P  11/02  A	1	0	3C067	B23P  11/02	830	ƤФ	Shrinkage fit
B23P  11/02  C	1	0	3C067	B23P  11/02	83	䤷Ф	Expansion fit
B23P  11/02  Z	1	0	3C067	B23P  11/02	321	¾̰ϤФ	Others (force fit)
B23P  13/00  \	0	0	3C067	B23P  13/00	655	ܼŪˤϵùȼʤñ¾Υ֥饹ˤäʬवʤȤˤ°ʪʤ¤üʪʤ¤£У	Making metal objects by operations essentially involving machining but not covered by a single other subclass (making specific objects B23P 15/00)
B23P  13/02  \	1	1	3C067	B23P  13/02	142	ùȤΤߤפʤ	in which only the machining operations are important
B23P  13/04  \	1	1	3C067	B23P  13/04	17	ڤȼʤ	involving slicing of profiled material
B23P  15/00  \	0	0	3C067	B23P  15/00	12	ñ¾Υ֥饹ޤϤΥ֥饹ˤñ쥰롼פʬवʤȤˤüʪʤ¤	Making specific metal objects by operations not covered by a single other subclass or a group in this subclass
B23P  15/00  A	0	0	3C067	B23P  15/00	23	Ѽ깩¤̳ƹŸΤΤ	Manufacture of the manual tool for work (excluding each tool having sub-categories)
B23P  15/00  C	0	0	3C067	B23P  15/00	64	סݥݡۥݥ롦ɥ¤	Manufacture of the pulley, wheel, or drum
B23P  15/00  Z	0	0	3C067	B23P  15/00	433	¾̣ݣͥ	Others (13/00 to 13/04 take precedence.)
B23P  15/02  \	1	1	3C067	B23P  15/02	129	ñ칩ҤΥӥ¤	turbine or like blades from one piece
B23P  15/04  \	1	1	3C067	B23P  15/04	79	ҤΥӥ¤	turbine or like blades from several pieces
B23P  15/06  \	1	1	3C067	B23P  15/06	57	ñ칩ҤΥԥȥ󥰤¤	piston rings from one piece
B23P  15/08  \	1	1	3C067	B23P  15/08	3	ҤΥԥȥ󥰤¤	piston rings from several pieces
B23P  15/10  \	1	1	3C067	B23P  15/10	97	ԥȥ¤	pistons
B23P  15/12  \	1	1	3C067	B23P  15/12	6	ʻҤ¤	gratings
B23P  15/14  \	1	1	3C067	B23P  15/14	305	ࡤ㡥	gear parts, e.g. gear wheels
B23P  15/16  \	1	1	3C067	B23P  15/16	109	˾¹Τġ㡥»ΥޤϥСʥΥѤ	plates with holes of very small diameter e.g. for spinning or burner nozzles
B23P  15/18  \	1	1	3C067	B23P  15/18	27	֥졼桼	brake shoes
B23P  15/20  \	1	1	3C067	B23P  15/20	4	ƻɬʡ㡥˾״	railroad requirements, e.g. buffers
B23P  15/22  \	1	1	3C067	B23P  15/22	2	貤ޤ̡Σ	cartridges or like shells[2006.01]
B23P  15/24  \	1	1	3C067	B23P  15/24	154	ʣ£ã£ã£ģͥ	dies (B21C 3/18, B21C 25/10, B21D 37/20 take precedence)
B23P  15/26  \	1	1	3C067	B23P  15/26	518	Ǯ򴹴	heat exchangers
B23P  15/28  \	1	1	3C067	B23P  15/28	74	ں﹩ʵ£ģ£ģ䤹ޤܤ䤹£ģ	cutting tools (sawing tools B23D 63/00, B23D 65/00; files or rasps B23D 73/00)
B23P  15/28  A	1	0	3C067	B23P  15/28	1521	ɽʤħΤ	characterized by the surface coating process
B23P  15/28  Z	1	0	3C067	B23P  15/28	903	¾	Others
B23P  15/30  \	2	2	3C067	B23P  15/30	132	ѥХ	lathes or like tools
B23P  15/32  \	2	2	3C067	B23P  15/32	317	ɥ	twist-drills
B23P  15/34  \	2	2	3C067	B23P  15/34	237	ե饤å	milling cutters
B23P  15/36  \	3	3	3C067	B23P  15/36	3	ͤڤѥե饤å	for thread cutting
B23P  15/38  \	2	2	3C067	B23P  15/38	26	ʿޤΩƺѥХȡʣ£Уͥ	planing or slotting tools (B23P 15/30 takes precedence)
B23P  15/40  \	2	2	3C067	B23P  15/40	25	ǿ	shearing tools
B23P  15/40  A	2	0	3C067	B23P  15/40	78	¤	Manufacture of scissors
B23P  15/40  Z	2	0	3C067	B23P  15/40	277	¾	Others
B23P  15/42  \	2	2	3C067	B23P  15/42	7	֥	broaching tools
B23P  15/44  \	2	2	3C067	B23P  15/44	9	ޤϥӥ󥰹	scraping or shaving tools
B23P  15/46  \	2	2	3C067	B23P  15/46	25	꡼	reaming tools
B23P  15/48  \	2	2	3C067	B23P  15/48	13	ͤڤ깩ʤͤڤѥե饤å£У	threading tools (milling cutters for thread-cutting B23P 15/36)
B23P  15/50  \	3	3	3C067	B23P  15/50	14		dies
B23P  15/52  \	3	3	3C067	B23P  15/52	36	å	taps
B23P  17/00  \	0	0	3C067	B23P  17/00	15	ñ¾Υ֥饹ޤϤΥ֥饹̤Υ롼פʬवʤ°ù	Metal-working operations, not covered by a single other subclass or another group in this subclass
B23P  17/00  A	0	0	3C067	B23P  17/00	336	ⰵˤù°ηꤢǡ£ơγޤ΢£á	Machining by high-pressure water (non-metal boring or cutting B 26 F; including abrasive grains R B 24 C)
B23P  17/00  Z	0	0	3C067	B23P  17/00	383	¾	Others
B23P  17/02  \	1	1	3C067	B23P  17/02	37	ñ°ùˡΤε	Single metal-working processes; Machines or apparatus therefor
B23P  17/04  \	1	1	3C067	B23P  17/04	8	ޤϷ̵طʤμˤħŤˡ	characterised by the nature of the material involved or the kind of product independently of its shape
B23P  17/06  \	2	2	3C067	B23P  17/06	171	¤	Making steel wool or the like
B23P  19/00  \	0	0	3C030	B23P  19/00	98	٤ѷȼɤ˴ؤ餺°ʤޤ϶°оʪޤ϶°°Ȥˤʤʤñ˰Τ˷ޤʬΥ뤿εʶ°ùˤ°ʤޤоʪη£У£ʡ£ˡˡΤιޤϴʼ깩̣£ˡΣ	Machines for simply fitting together or separating metal parts or objects, or metal and non-metal parts, whether or not involving some deformation (fitting together metal parts or objects by metal work treatment B23P11/00, B21J, B23K); Tools or devices therefor  (hand tools in general B25) [3]
B23P  19/00 301 \	1	1	3C030	B23P  19/00	20	ʤζʥ٥˴Ϣʪʤμ갷֤ϣ£ǣ	Supply of parts (device for handling article in relation to conveyor B 65 G47/00)
B23P  19/00 301 B	1	0	3C030	B23P  19/00	704	ʤʬΥ	Separation of parts
B23P  19/00 301 C	1	0	3C030	B23P  19/00	271	ʤʬ	Distribution of parts
B23P  19/00 301 D	1	0	3C030	B23P  19/00	718	ʤΰַ	Alignment of parts
B23P  19/00 301 G	1	0	3C030	B23P  19/00	683	ʤΥåȶ롤㡥ȥ졼	Parts lot supply, e.g. tray
B23P  19/00 301 H	1	0	3C030	B23P  19/00	299	ʥޥ㡥Ҹˤ˶ᤤΩŪʥޥ	Parts magazine, e.g. cubic parts magazine near warehouse
B23P  19/00 301 K	1	0	3C030	B23P  19/00	237	ʤμ̤ޤȽ	Identification of parts
B23P  19/00 301 L	1	0	3C030	B23P  19/00	879	ʤΰޤϰ	Transfer or loading of parts
B23P  19/00 301 Z	1	0	3C030	B23P  19/00	216	¾	Others
B23P  19/00 302 \	1	1	3C030	B23P  19/00	15	ݥ	Work feed
B23P  19/00 302 F	1	0	3C030	B23P  19/00	328	ݥ	Work feed means
B23P  19/00 302 G	1	1	3C030	B23P  19/00	488	ˤΡ㡥ѥĥȡ֤ˤ	using a feeding jig, e.g. pallet, cart
B23P  19/00 302 H	1	2	3C030	B23P  19/00	508		Feeding jig
B23P  19/00 302 J	1	2	3C030	B23P  19/00	196	Υ饤ؤΰַ	Feeding jig alignment to the line
B23P  19/00 302 K	1	2	3C030	B23P  19/00	231	ؤޤϰַ	Work loading to or alignment on the feeding jig
B23P  19/00 302 M	1	1	3C030	B23P  19/00	95	ݥơݥ֥ˤΡʼϤ֤ΤΤϣ£Уǡ	using a turntable (assembling device laid out around the turntable B23P21/00 307G)
B23P  19/00 302 P	1	0	3C030	B23P  19/00	413	ΰַᡤ㡥٥ΰַʣ£Уʡ£Уˤͥ	Work alignment, e.g. alignment on the conveyer (B23P19/00 302J and B23P19/00 302K take precedence.)
B23P  19/00 302 Q	1	1	3C030	B23P  19/00	438	ץȴĤǤ	Printed board as the work
B23P  19/00 302 R	1	0	3C030	B23P  19/00	436	ΰޤϰܺ	Work transfer or loading
B23P  19/00 302 U	1	0	3C030	B23P  19/00	106	μ̤ޤȽ	Work identification
B23P  19/00 302 Z	1	0	3C030	B23P  19/00	94	¾	Others
B23P  19/00 303 \	1	1	3C030	B23P  19/00	11		Inspection
B23P  19/00 303 A	1	0	3C030	B23P  19/00	394	֡ȹ礻	Position, attitude, combination
B23P  19/00 303 B	1	0	3C030	B23P  19/00	317	Ω	Assembly failure
B23P  19/00 303 Z	1	0	3C030	B23P  19/00	228	¾	Others
B23P  19/00 304 \	1	1	3C030	B23P  19/00	3		Supplementary instrument
B23P  19/00 304 A	1	0	3C030	B23P  19/00	235	ʤ˻Ѥ	used for insertion of parts
B23P  19/00 304 C	1	0	3C030	B23P  19/00	336	ʥθ˻Ѥ	used to fasten the part or work
B23P  19/00 304 E	1	0	3C030	B23P  19/00	707	ʥΰַ˻Ѥ	used for alignment of the part or work
B23P  19/00 304 F	1	1	3C030	B23P  19/00	145	ַơ֥	Aligning table
B23P  19/00 304 H	1	0	3C030	B23P  19/00	151	ʥȿžл˻Ѥ	used to invert or tilt the part or work
B23P  19/00 304 K	1	0	3C030	B23P  19/00	161	ΩȤƻѤ	used as the assembly workbench
B23P  19/00 304 Z	1	0	3C030	B23P  19/00	181	¾㡥	Others, e.g. adhesive
B23P  19/02  \	1	1	3C030	B23P  19/02	7	ץ쥹Фˤоʪѡޤϥץ쥹Ф賰ѡʣ£УͥˡΣ	for connecting objects by press fit, or for detaching same (B23P19/10 takes precedence) [1,7]
B23P  19/02  A	1	0	3C030	B23P  19/02	673		Insertion
B23P  19/02  B	1	0	3C030	B23P  19/02	1252		Press fit
B23P  19/02  C	1	1	3C030	B23P  19/02	299	ǴΡʣáǤξޤ	Viscous or elastic member (C to G include the case of insertion.)
B23P  19/02  D	1	1	3C030	B23P  19/02	1522	å󥰡å	C ring, clip
B23P  19/02  E	1	1	3C030	B23P  19/02	473	ϥ󥰡륷	O ring, oil seal
B23P  19/02  F	1	1	3C030	B23P  19/02	115	ԥʥå	Pierce nut
B23P  19/02  G	1	1	3C030	B23P  19/02	178	ԥȥ	Piston ring
B23P  19/02  P	1	0	3C030	B23P  19/02	628	Ϥ礤	Fit control
B23P  19/02  Q	1	1	3C030	B23P  19/02	266	ʿưȼΡ㡥եƥ	accompanied by very small moving in a plane, e.g. floating
B23P  19/02  R	1	1	3C030	B23P  19/02	155	ΰưȼΡ㡥¤βž	accompanied by moving around the charging axis, e.g. key groove rotation
B23P  19/02  Z	1	0	3C030	B23P  19/02	150	¾㡥ڴإå	Others, e.g. change-over head
B23P  19/027  \	2	2	3C030	B23P  19/027	713	ޤ϶ˤʤȤΡʣ£УͥˡΣ	using hydraulic or pneumatic means(B23P19/033 takes precedence) [7]
B23P  19/033  \	2	2	3C030	B23P  19/033	112	ưȤΡΣ	using vibration [7]
B23P  19/04  \	1	1	3C030	B23P  19/04	49	ʤΩѡޤʬѡʣ£УͥˡΣ	for assembling or disassembling parts (B23P19/10 takes precedence) [1,7]
B23P  19/04  A	1	0	3C030	B23P  19/04	587	ᡦޤʤʤͭΡʲùʤħΤϣ£ġ	having a caulking or bending means (characterised by the machining means B21D)
B23P  19/04  B	1	0	3C030	B23P  19/04	244	ܼʤͭΡʲùʤϣ£ˡ	having a welding means (machining means B23K)
B23P  19/04  D	1	0	3C030	B23P  19/04	245	Ļͭ	having a holding tool
B23P  19/04  E	1	1	3C030	B23P  19/04	924	ĻŻĻϣȣ̡ȣˡޤޥ˥ԥ졼Ļϣ£ʣ֤ޤȹ礵줿ʤϣ£ѣ	Holding mechanism (application for electronic parts H 01 L, H 05 K; manipulator holding part including adhesion B25J15/00; holding means arranged or combined with machine tool B23Q7/04)
B23P  19/04  F	1	1	3C030	B23P  19/04	508	Ļΰư㡥ʿ̰ư	Moving of the holding tool, e.g. moving in a plane
B23P  19/04  G	1	2	3C030	B23P  19/04	388	¿᷿ޥ˥ԥ졼	Multi-joint type manipulator
B23P  19/04  H	1	1	3C030	B23P  19/04	279	ʣĤĻͭΡ㡥򴹼Ļͭ	having multiple holding tools, e.g. having replaceable holding tool
B23P  19/04  K	1	0	3C030	B23P  19/04	470	ʬʤͭ	having a disassembling means
B23P  19/04  Z	1	0	3C030	B23P  19/04	316	¾	Others
B23P  19/06  \	2	2	3C030	B23P  19/06	40	ͤޤϥʥåȤդޤϴˤᵡ	Screw or nut setting or loosening machines
B23P  19/06  A	2	0	3C030	B23P  19/06	1078	ͤʥåȤζ	Screw or nut supply
B23P  19/06  E	2	0	3C030	B23P  19/06	589	դ	Tightening tool
B23P  19/06  C	2	1	3C030	B23P  19/06	635	ͤʥåȤݻ	Screw or nut retention
B23P  19/06  D	2	2	3C030	B23P  19/06	293	դȤͤʥåȤȤΰַ	Alignment between the tightening tool and screw/nut
B23P  19/06  G	2	2	3C030	B23P  19/06	63	դȤͤʥåȤȤοĤɻ	Biting prevention between the tightening tool and screw/nut
B23P  19/06  H	2	2	3C030	B23P  19/06	14	ͤʥåȤνʣݻɻ	Screw/nut double holding prevention
B23P  19/06  J	2	1	3C030	B23P  19/06	208	դΰư	Moving of the tightening tool
B23P  19/06  M	2	2	3C030	B23P  19/06	309	դդоݤȤΰַ	Alignment between the tightening tool and tightened object
B23P  19/06  N	2	2	3C030	B23P  19/06	219	դ񤬣أʿ̤ư	Tightening tool that moves in the XY plane
B23P  19/06  Q	2	1	3C030	B23P  19/06	480	դʣ¸ߤ	Multiple tightening tools that exist
B23P  19/06  K	2	0	3C030	B23P  19/06	377	դ˴ؤ븡	Inspection related to tightening
B23P  19/06  P	2	0	3C030	B23P  19/06	648	դȥ륯ʥѥʡɥ饤ФκޤϤ°ϣ££	Tightening torque control (details or attachment of wrench, driver B 25 B 23/00.)
B23P  19/06  T	2	0	3C030	B23P  19/06	520	Ӥħդ	Tightening device characterized by the application
B23P  19/06  S	2	1	3C030	B23P  19/06	138	ϧƴդդ	for tightening the tightening clamp of the nuclear plant pressure vessel
B23P  19/06  U	2	1	3C030	B23P  19/06	109	¾ʬवʤŵʡʤĴ	for adjusting electrical parts or mechanical parts not covered elsewhere
B23P  19/06  V	2	0	3C030	B23P  19/06	84	դΰк	Safety measures for tightening
B23P  19/06  Z	2	0	3C030	B23P  19/06	320	¾㡥ư	Others, e.g. drive source
B23P  19/08  \	2	2	3C030	B23P  19/08	261	ܥȤ䤽¾˺¶⡤åϤ뵡	Machines for placing washers, circlips, or the like on bolts or other members
B23P  19/10  \	1	1	3C030	B23P  19/10	1026	礹ʤ󤵤Σ	Aligning parts to be fitted together [7]
B23P  19/12  \	2	2	3C030	B23P  19/12	64	ʤΣ	Alignment of parts for insertion into bores [7]
B23P  21/00  \	0	0	3C030	B23P  21/00	76	˥åȤ٤¿ʤΩƤ뵡ǡΤ褦ʤùΤޤϤʤΡ㡥ץդΤΡΣ	Machines for assembling a multiplicity of different parts to compose units, with or without preceding or subsequent working of such parts, e.g. with program control[2006.01]
B23P  21/00 301 \	1	1	3C030	B23P  21/00	7	ʪʤΩ	Assembling a particular item in general
B23P  21/00 301 A	1	0	3C030	B23P  21/00	377	Ω	Assembly of the shaft and surrounding parts
B23P  21/00 301 B	1	0	3C030	B23P  21/00	318	Ǯ򴹴Ω	Assembly of the heat exchanger
B23P  21/00 301 Z	1	0	3C030	B23P  21/00	484	¾	Others
B23P  21/00 302 \	2	2	3C030	B23P  21/00	2	𡤷ۡ	Residence, building, civil engineering
B23P  21/00 302 A	2	0	3C030	B23P  21/00	793	ΡѥͥΩ	Frame member or panel assembling device
B23P  21/00 302 B	2	0	3C030	B23P  21/00	282	ΡѥͥΩˡ	Frame member or panel assembling method
B23P  21/00 302 Z	2	0	3C030	B23P  21/00	320	¾	Others
B23P  21/00 303 \	2	2	3C030	B23P  21/00	4	͢	Transportation machine
B23P  21/00 303 A	2	0	3C030	B23P  21/00	1967	ự֡£ģϢ	Automobiles (B 62 D 65/00 related)
B23P  21/00 303 B	2	1	3C030	B23P  21/00	1249	ư֤˥ĥ	Units constituting an automobile
B23P  21/00 303 C	2	2	3C030	B23P  21/00	794	󥸥	Engine
B23P  21/00 303 Z	2	0	3C030	B23P  21/00	370	¾	Others
B23P  21/00 304 \	2	2	3C030	B23P  21/00	2	̩ص	Precision optical machine
B23P  21/00 304 A	2	0	3C030	B23P  21/00	71		Clock
B23P  21/00 304 Z	2	0	3C030	B23P  21/00	90	¾	Others
B23P  21/00 305 \	2	2	3C030	B23P  21/00	4	ŵ	Electrical machine
B23P  21/00 305 A	2	0	3C030	B23P  21/00	2010	ץȴĤؤ̣ȣˣͥ	Insertion into the printed board (H 05 K 13/04 takes precedence.)
B23P  21/00 305 B	2	0	3C030	B23P  21/00	1842	ȼӴϢȡ̣ȣˣȡ	Miscellaneous related works accompanying insertion (Refer to H 05 K 13/00.)
B23P  21/00 305 C	2	0	3C030	B23P  21/00	77	ŻҴ	Electron tube
B23P  21/00 305 Z	2	0	3C030	B23P  21/00	482	¾	Others
B23P  21/00 306 \	2	2	3C030	B23P  21/00	1		Machine elements
B23P  21/00 306 A	2	0	3C030	B23P  21/00	395		Bearing
B23P  21/00 306 B	2	0	3C030	B23P  21/00	47	ݥ	Chain
B23P  21/00 306 C	2	0	3C030	B23P  21/00	227	Ф͡ؤμâưѥڥ󥷥ؤμբ¡	Spring (installation on another member, etc.; installation on the car suspension R 21/00 303 B)
B23P  21/00 306 D	2	0	3C030	B23P  21/00	313	Ρ̥ۡݥޤ	Tube member (including the hose)
B23P  21/00 306 Z	2	0	3C030	B23P  21/00	306	¾	Others
B23P  21/00 307 \	1	1	3C030	B23P  21/00	22	Ωƥ	Assembly system
B23P  21/00 307 E	1	0	3C030	B23P  21/00	721	Ω饤	Assembly line
B23P  21/00 307 F	1	1	3C030	B23P  21/00	268	ľ	Linear type
B23P  21/00 307 G	1	1	3C030	B23P  21/00	254	ϡ̥ݥơݥ֥뷿Ω饤ޤ	Curved type (including the turntable type assembly line)
B23P  21/00 307 J	1	0	3C030	B23P  21/00	467	ɽؼƥ	Work indication/instruction system
B23P  21/00 307 P	1	0	3C030	B23P  21/00	666	Ω饤ؤʶ륷ƥʶּΤι¤	Systems for supplying parts to the assembly line, or the like. (the structure of the parts supply device itself &rarr; 19/00 301)
B23P  21/00 307 Z	1	0	3C030	B23P  21/00	1072	¾	Others
B23P  23/00  \	0	0	3C067	B23P  23/00	6	ñ¾Υ֥饹ʬवʤʶ°ùȤ̤ȹ礻ΤԤޤϵʣ粣椰ե饤ף££⤷̤μκȤפǤʤʤУ£ѣ£ѣˡΣ	Machines or arrangements of machines for performing specified combinations of different metal-working operations not covered by a single other subclass (combined horizontal boring and milling machines B23B 39/02; if the particular kinds of operation are not essential B23Q 37/00-B23Q 41/00) [2006.01]
B23P  23/00  A	0	0	3C067	B23P  23/00	240	ޥ˥󥰥	Machining centre
B23P  23/00  Z	0	0	3C067	B23P  23/00	195	¾	Others
B23P  23/02  \	1	1	3C067	B23P  23/02	48	ʵùȤԤס㡥åס£¡	Machine tools for performing different machining operations (lathes, e.g. capstan lathes, B23B)
B23P  23/02  A	1	0	3C067	B23P  23/02	279	ùȲžβùԤ	Performing turning machining and rotary tool machining
B23P  23/02  Z	1	0	3C067	B23P  23/02	373	¾	Others
B23P  23/04  \	1	1	3C067	B23P  23/04	909	ùȤ¾ζ°ùȤȤԤ	for both machining and other metal-working operations
B23P  23/06  \	1	1	3C067	B23P  23/06	112	¿Ϣ絡ޤ֤깽줿°ùץ	Metal-working plant comprising a number of associated machines or apparatus
B23P  25/00  \	0	0	3C067	B23P  25/00	257	κѤޤϹʪν˾ǽ֤ã¥ʤ٤ùˡޤƱˤ빩ʪؤ㡥Ϥν	Auxiliary treatment of workpieces, before or during machining operations, to facilitate the action of the tool or the attainment of a desired final condition of the work, e.g. relief of internal stress
