B23Q   1/00  \	0	0	3C048	B23Q   1/00	298	̤˹η֤ࡤäŪ礭ʸʣ£ѣͥ	Members which are comprised in the general build-up of a form of machine, particularly relatively large fixed members (B23Q 37/00 takes precedence)
B23Q   1/00  C	0	0	3C048	B23Q   1/00	377	ޤ۴ɤ	Arrangement of wiring or piping
B23Q   1/00  D	0	1	3C048	B23Q   1/00	56	ΰưθ	Arrangement for considering movement of output member
B23Q   1/00  E	0	2	3C048	B23Q   1/00	179	žޤư	Rotation or manner of rotating movement
B23Q   1/00  F	0	2	3C048	B23Q   1/00	97	ľư	Manner of linear movement
B23Q   1/00  G	0	0	3C048	B23Q   1/00	222	פ	Arrangement of control panel
B23Q   1/00  H	0	0	3C048	B23Q   1/00	190	ޤϹʪλٻΤ̤֤ħΤ	Characteristic in special arrangement for support of tool or workpiece
B23Q   1/00  J	0	1	3C048	B23Q   1/00	109	ȥŪִط˴ؤ	Rrelative arrangement of tool and work
B23Q   1/00  S	0	0	3C048	B23Q   1/00	279	ΤοդȰĴ̴Ϣƣͣ	Setting and positional adjustment for machine body[Relate to F16M7/00]
B23Q   1/00  T	0	1	3C048	B23Q   1/00	142	٥󥰡ʿФ	Leveling and the horizontal putting out
B23Q   1/00  U	0	1	3C048	B23Q   1/00	149	ɿޤ	Vibrational proofing or control of vibration
B23Q   1/00  Z	0	0	3C048	B23Q   1/00	412	¾	Others
B23Q   1/01  \	1	1	3C048	B23Q   1/01	18	ե졼ࡤ٥åɡԥ顼ޤࡨưϩ֡Σ	Frames, beds, pillars or like members; Arrangement of ways [6]
B23Q   1/01  F	1	0	3C048	B23Q   1/01	238	ե졼	Frame
B23Q   1/01  G	1	0	3C048	B23Q   1/01	376	٥å	Bed
B23Q   1/01  H	1	0	3C048	B23Q   1/01	255	ԥ顼	Pillar and column
B23Q   1/01  T	1	0	3C048	B23Q   1/01	701	ݥơݥ֥	Work-table
B23Q   1/01  W	1	0	3C048	B23Q   1/01	456	ưϩ֡	Arrangement and mounting of sliding channel
B23Q   1/01  Z	1	0	3C048	B23Q   1/01	177	¾	Others
B23Q   1/03  \	1	1	3C048	B23Q   1/03	67	ʪޤϹλٻΤǤäơưʤΡʣ£ѣͥ表ơ֥£ѣ££ˡΣ	Stationary work or tool supports (B23Q 1/70 takes precedence; auxiliary tables B23Q 1/74; tailstocks B23B 23/00) [6]
B23Q   1/25  \	1	1	3C048	B23Q   1/25	137	ʪޤϹλٻΤǤäơưޤĴ᤬ǽʤΡΣ	Movable or adjustable work or tool supports [6]
B23Q   1/26  \	2	2	3C048	B23Q   1/26	116	Ū˰ưǽζƯ˴ؤ빽¤ħΡΤ褦ŪưɤμʡΣ	characterised by constructional features relating to the co-operation of relatively movable members; Means for preventing relative movement of such members [6]
B23Q   1/26  A	2	0	3C048	B23Q   1/26	137	ݣʬव줿ʣμʤȤ߹碌	Combination for bearing means of multiple number classified into 1/38-1/42
B23Q   1/26  Z	2	0	3C048	B23Q   1/26	580	¾	Others
B23Q   1/28  \	3	3	3C048	B23Q   1/28	349	ưǤդΰ֤˸ꤹ뤿μʡΣ	Means for securing sliding members in any desired position [6]
B23Q   1/28  A	3	0	3C048	B23Q   1/28	309	Ū˥פ	Mechanical clamping
B23Q   1/28  B	3	1	3C048	B23Q   1/28	176	ưΥɤޤϥ졼ѤƸꤹ	Fixazation by using guide or rail of sliding member
B23Q   1/28  C	3	1	3C048	B23Q   1/28	238	ήΰѤħΤ	Characteristic in the point by using fluid pressure
B23Q   1/28  D	3	0	3C048	B23Q   1/28	48		Vacuum adsorption
B23Q   1/28  E	3	0	3C048	B23Q   1/28	59	ż	Electromagnetic adsorption
B23Q   1/28  Z	3	0	3C048	B23Q   1/28	56	¾	Others
B23Q   1/30  \	3	3	3C048	B23Q   1/30	193	굡˴Ϣ椵ΡΣ	controlled in conjunction with the feed mechanism [6]
B23Q   1/32  \	3	3	3C048	B23Q   1/32	59	Ư̤ˤäбưΡ㡥̷ѤΣ	Relative movement obtained by co-operating spherical surfaces, e.g. ball-and-socket joints [6]
B23Q   1/34  \	3	3	3C048	B23Q   1/34	2	ѷǽλѤˤŪưΡ㡥ǻҡǻҡǤޤǮĥǡŪ¬˸ꤵʤǻҤǤäƱưޤѰ̤뤳ȤʤΣǣ£ˡΣ	Relative movement obtained by use of deformable elements, e.g. piezo-electric, magnetostrictive, elastic or thermally-dilatable elements (sensitive elements capable of producing movement or displacement for purposes not limited to measurement G12B 1/00) [6]
B23Q   1/34  A	3	0	3C048	B23Q   1/34	88	ʿΰưޤĴ	Movement or preparation in plane face
B23Q   1/34  B	3	1	3C048	B23Q   1/34	45	žޤޤ	Construction including rotation or whirling
B23Q   1/34  C	3	0	3C048	B23Q   1/34	31	⤵Ĵޤ	Adjustment of height
B23Q   1/34  D	3	0	3C048	B23Q   1/34	52	ФĴޤ	Adjustment of inclination
B23Q   1/34  Z	3	0	3C048	B23Q   1/34	32	¾	Others
B23Q   1/36  \	4	4	3C048	B23Q   1/36	164	Ф͡Σ	Springs [6]
B23Q   1/38  \	3	3	3C048	B23Q   1/38	19	ήμޤήδ˾׻ٻѤΡΣ	using fluid bearings or fluid cushion supports [6]
B23Q   1/38  A	3	0	3C048	B23Q   1/38	295	Ϥޤή̤Ĵ	Adjustment pressure or flow rate
B23Q   1/38  B	3	1	3C048	B23Q   1/38	63	ήθĴ	Adjustment thickness of fluid film
B23Q   1/38  C	3	0	3C048	B23Q   1/38	21	̤äήΡ㡥ήΡ	Fluid having special fluent material such as magnetic fluid
B23Q   1/38  Z	3	0	3C048	B23Q   1/38	473	¾	Others
B23Q   1/40  \	3	3	3C048	B23Q   1/40	758	ܡ롤顼ޤϼؤѤΡΣ	using ball, roller or wheel arrangements [6]
B23Q   1/42  \	3	3	3C048	B23Q   1/42	207	Էַ̡̡Ф̤ޤΰѤΡʣ£ѣͥˡΣ	using T-, V-, dovetail-section or like guides (B23Q 1/40 takes precedence) [6]
B23Q   1/44  \	2	2	3C048	B23Q   1/44	10	εѤΡʣ£ѣͥˡΣ	using particular mechanisms (B23Q  1/26 takes precedence);;
B23Q   1/44  A	2	0	3C048	B23Q   1/44	153	ѥưʽФʣĸߤΩब³Ρ	Parallel driving mechanism such as input members connecting multiply and independently to output member
B23Q   1/44  B	2	1	3C048	B23Q   1/44	59	ľưϲžͭ	Direct acting mechanism or rotational machanism, additionally
B23Q   1/44  C	2	1	3C048	B23Q   1/44	70	ưʤ󥯤ޤϰޤΡʼͳ٤ͳٰʲ	Mechanism including not drivened rink or guide member below 5 of freedom degrees
B23Q   1/44  D	2	0	3C048	B23Q   1/44	27	Ѥ	Use of wedge member
B23Q   1/44  E	2	1	3C048	B23Q   1/44	23	ʿΰưޤĴ	Movement or adjustment in plane face
B23Q   1/44  F	2	2	3C048	B23Q   1/44	12	žޤޤ	Rotation or whirling
B23Q   1/44  G	2	1	3C048	B23Q   1/44	71	⤵Ĵޤ	Adjustment of height
B23Q   1/44  H	2	1	3C048	B23Q   1/44	20	ФĴޤ	Adjustment of inclination
B23Q   1/44  J	2	0	3C048	B23Q   1/44	87	Ѥ	Use of cam
B23Q   1/44  K	2	0	3C048	B23Q   1/44	31	˱äưޤΡʣݣͥ	Operation along curve(Priorities 1/48-1/54)
B23Q   1/44  Z	2	0	3C048	B23Q   1/44	266	¾	Others
B23Q   1/46  \	3	3	3C048	B23Q   1/46	13	ͤڥͭΡΣ	with screw pairs [6]
B23Q   1/48  \	3	3	3C048	B23Q   1/48	4	ưڥȲžڥͭΡʣ£ѣͥˡΣ	with sliding pairs and rotating pairs (B23Q 1/46 takes precedence) [6]
B23Q   1/48  A	3	0	3C048	B23Q   1/48	162	ñưڥñβžڥ	Single sliding pair and single rotating pair
B23Q   1/48  B	3	0	3C048	B23Q   1/48	184	Ĥưڥñβžڥ㡥أ٦ȵ	Two sliding pairs and single rotating pair, e.g. mechanism of X, Y, theta
B23Q   1/48  C	3	0	3C048	B23Q   1/48	110	Ĥưڥñβžڥ	Three sliding pairs and single rotating pair
B23Q   1/48  D	3	0	3C048	B23Q   1/48	59	ñưڥȣĤβžڥ	Single sliding pair and two rotating pair
B23Q   1/48  E	3	0	3C048	B23Q   1/48	38	ĤưڥȣĤβžڥ	Two sliding pairs and two rotating pairs
B23Q   1/48  F	3	0	3C048	B23Q   1/48	162	ĤưڥȣĤβžڥ㡢ù	Three sliding pairs and two horn rotating pairs, e.g. five stem processing machine
B23Q   1/48  Z	3	0	3C048	B23Q   1/48	67	¾	Others
B23Q   1/50  \	3	3	3C048	B23Q   1/50	4	žڥΤߤͭΡΣ	with rotating pairs only [6]
B23Q   1/50  A	3	0	3C048	B23Q   1/50	28	᷿ޥ˥ץ졼פΤ	Manipulator type of articulated type
B23Q   1/50  B	3	0	3C048	B23Q   1/50	25	пħͭ	Characteristic having eccentricity
B23Q   1/50  Z	3	0	3C048	B23Q   1/50	53	¾	Others
B23Q   1/52  \	4	4	3C048	B23Q   1/52	752	ñβžڥΣ	a single rotating pair [6]
B23Q   1/54  \	4	4	3C048	B23Q   1/54	188	ĤβžڥΤߡΣ	two rotating pairs only [6]
B23Q   1/56  \	3	3	3C048	B23Q   1/56	2	ưڥΤߤͭΡΣ	with sliding pairs only [6]
B23Q   1/56  A	3	0	3C048	B23Q   1/56	33	Ĥưڥͭ	Three sliding pairs
B23Q   1/56  B	3	1	3C048	B23Q   1/56	182	ߤ˿ľʣĤμͭΡʣأ٣ؤư	Three vertical shafts mutually, e.g. operation to XYZ direction
B23Q   1/56  Z	3	0	3C048	B23Q   1/56	82	¾	Others
B23Q   1/58  \	4	4	3C048	B23Q   1/58	8	ñưڥΣ	a single sliding pair [6]
B23Q   1/58  A	4	0	3C048	B23Q   1/58	192	ʣζưưΡ㡧緿	Operation by multiple driving members, e.g. portal type
B23Q   1/58  Z	4	0	3C048	B23Q   1/58	722	¾	Others
B23Q   1/60  \	4	4	3C048	B23Q   1/60	5	ĤưڥΤߡΣ	two sliding pairs only [6]
B23Q   1/60  A	4	0	3C048	B23Q   1/60	117	ĤưڥʿԤʤ	Paralleled two sliding pairs
B23Q   1/60  Z	4	0	3C048	B23Q   1/60	22	¾	Others
B23Q   1/62  \	5	5	3C048	B23Q   1/62	5	Ĥưڥߤ˿ľʼͭΡ㡥饤ɡΣ	with perpendicular axes, e.g. cross-slides [6]
B23Q   1/62  A	5	0	3C048	B23Q   1/62	209	أ٥ơ֥롢饤	XY table and cross slide
B23Q   1/62  B	5	1	3C048	B23Q   1/62	146	Ѥ߽ŤͤƤʤ	Mechanism not piled
B23Q   1/62  C	5	1	3C048	B23Q   1/62	349	ư֤֡ħΤ	Characteristic of arrangement for driving member and guide member
B23Q   1/62  Z	5	0	3C048	B23Q   1/62	53	¾	Others
B23Q   1/64  \	2	2	3C048	B23Q   1/64	2	ưŪħΡʳФ֣£ѣˡΣ	characterised by the purpose of the movement (indexing equipment B23Q 16/02) [6]
B23Q   1/64  A	2	0	3C048	B23Q   1/64	50	ʪޤϹλٻΤΥåƥ	Setting of support of workpiece or tool
B23Q   1/64  B	2	1	3C048	B23Q   1/64	44	٥󥰡ʿФ	Leveling and the horizontal putting out
B23Q   1/64  C	2	1	3C048	B23Q   1/64	73	ĽФ	Centering
B23Q   1/64  D	2	0	3C048	B23Q   1/64	298	ù˹ޤϹʪλٻ򷹼ФƲù	Inclining and deciding direction for supporting stand of tool or workpiece before and after processing
B23Q   1/64  Z	2	0	3C048	B23Q   1/64	143	¾	Others
B23Q   1/66  \	3	3	3C048	B23Q   1/66	10	ư֤˸ߤ˿Ǥơ֥Σ	Work-tables interchangeably movable into operating positions [6]
B23Q   1/66  D	3	0	3C048	B23Q   1/66	65	ľư	Straight line operating
B23Q   1/66  E	3	0	3C048	B23Q   1/66	88	žޤưޤ	Apparatus including rotation or rotating movement
B23Q   1/66  Z	3	0	3C048	B23Q   1/66	7	¾	Others
B23Q   1/68  \	3	3	3C048	B23Q   1/68	174	ư˹ޤϹʪ뤿ΤΡΣ	for withdrawing tool or work during reverse movement [6]
B23Q   1/70  \	1	1	3C048	B23Q   1/70	596	ޤϹʪդ뤿βù缴ٻǤäơꤷޤϰưǽʤΡʼ缴ޤΤΡù缴ٻΣ££ù缴££ˡΣ	Stationary or movable members for carrying working-spindles for attachment of tools or work (headstocks or the like, working-spindle supports B23B 19/00; working-spindles B23B 19/02) [6]
B23Q   1/72  \	1	1	3C048	B23Q   1/72	3	֡ơ֥ȲưǤȤδ֤ϢΣ	Auxiliary arrangements; Interconnections between auxiliary tables and movable machine elements [6]
B23Q   1/72  A	1	0	3C048	B23Q   1/72	309	̥Х󥹤ΤΤ	Apparatus balance for weight
B23Q   1/72  B	1	0	3C048	B23Q   1/72	315	ѷɻߤΤΤ	Apparatus for prevention of deformation
B23Q   1/72  Z	1	0	3C048	B23Q   1/72	259	¾	Others
B23Q   1/74  \	2	2	3C048	B23Q   1/74	97	ơ֥Σ	Auxiliary tables [6]
B23Q   1/76  \	2	2	3C048	B23Q   1/76	0	ߤᡨʪΣ	Steadies; Rests [6]
B23Q   1/76  R	2	0	3C048	B23Q   1/76	249	ߤ	Apparatus for stopping oscillation
B23Q   1/76  S	2	1	3C048	B23Q   1/76	94	ܿ	Contacting part of work
B23Q   1/76  T	2	1	3C048	B23Q   1/76	117	ٻߤᡡ̣Ӥͥ	Apparatus for stopping oscillation by three points of support prioritized S
B23Q   1/76  Z	2	0	3C048	B23Q   1/76	127	¾	Others
B23Q   3/00  \	0	0	3C016	B23Q   3/00	284	̤˼賰ȤΤǤιʪޤϹݻٻޤϰַ򤹤֡ʹʪꤹ뤿̾ϼ賰ȤΤǤʤʡơ֥ޤ¾ࡤ㡥ģ£ѣưַ£ѣﵡΤβžإåɣ££££ưʤݻ££åȤΰŪħ££դϢ롤곰ޤݻѤιޤ£¡	Devices holding, supporting, or positioning, work or tools, of a kind normally removable from the machine (work-tables or other parts, e.g. faceplates, normally not incorporating means for securing work B23Q 1/00; automatic position control B23Q 15/00; rotary tool heads for turning-machines B23B 3/24, B23B 3/26; non-driven tool holders B23B 29/00; general features of turrets B23B 29/24; tools or bench devices for fastening, connecting, disengaging or holding B25B)
B23Q   3/00  A	0	0	3C016	B23Q   3/00	345	ѥĥȤΥơݥ֥ؤθ	Pallet fastening on the table
B23Q   3/00  Z	0	0	3C016	B23Q   3/00	333	¾Τ	Others
B23Q   3/02  \	1	1	3C016	B23Q   3/02	8	ơ֥롤ư桤ޤʪ˼դ뤿ΤΡʣ£ѣͥ	for mounting on a work-table, tool-slide, or analogous part (B23Q 3/15 takes precedence)
B23Q   3/02  A	1	0	3C016	B23Q   3/02	852	ʪλپ	Work supporting
B23Q   3/02  Z	1	0	3C016	B23Q   3/02	298	¾̥ѥĥȤʤɡ	Others (pallet, etc.)
B23Q   3/04  \	2	2	3C016	B23Q   3/04	233	ФĴἫߤʤ	adjustable in inclination
B23Q   3/06  \	2	2	3C016	B23Q   3/06	182	ʪ	Work-clamping means
B23Q   3/06 301 \	3	3	3C016	B23Q   3/06	0	ơݥ֥ʳδ̤ˤĤ	Pressing onto the reference plane other than the table
B23Q   3/06 301 A	3	0	3C016	B23Q   3/06	82	ήΰζȯ֤Ĥ	having a fluid pressure type tightening force generating device
B23Q   3/06 301 B	3	1	3C016	B23Q   3/06	186	ήεħ	characterized by the fluid component
B23Q   3/06 301 C	3	1	3C016	B23Q   3/06	139	ưݤľư	Direct action of the movable jaw
B23Q   3/06 301 D	3	2	3C016	B23Q   3/06	239	ϡưϤȤ˴̤Фƿľʤ	Both tightening force and drive force that are perpendicular to the reference plane
B23Q   3/06 301 E	3	2	3C016	B23Q   3/06	37	Ϥ̤ФƿľǶưϤ̤ФʿԤʤ	Tightening force that is perpendicular to the reference plane and drive force that is parallel with the reference plane
B23Q   3/06 301 F	3	1	3C016	B23Q   3/06	79	ưݤư	Movable jaw that rocks
B23Q   3/06 301 G	3	2	3C016	B23Q   3/06	34	ưȻȤδ֤ˤ	Drive point provided between the tightening point and fulcrum
B23Q   3/06 301 H	3	2	3C016	B23Q   3/06	160	ưȤδ֤ˤ	Fulcrum provided between the drive point and the tightening point
B23Q   3/06 301 J	3	0	3C016	B23Q   3/06	111	㡥ܥȡʥĥȡζȯĤ	Mechanical type, e.g. having the bolt, nut, or cam tightening force generating mechanism
B23Q   3/06 301 K	3	1	3C016	B23Q   3/06	312	ưݤľư	Direct action of the movable jaw
B23Q   3/06 301 L	3	2	3C016	B23Q   3/06	304	̲ưݤơݥ֥̤˱ĤưưΡ	Horizontal tightening (movable jaw moving along the table surface)
B23Q   3/06 301 M	3	3	3C016	B23Q   3/06	112	ХѤ	utilising a tilting cam
B23Q   3/06 301 N	3	3	3C016	B23Q   3/06	40	Сݤưưˤ	using the rocking motion of a lever
B23Q   3/06 301 P	3	1	3C016	B23Q   3/06	148	ưݤư	movable jaw, being able to rock
B23Q   3/06 301 Z	3	0	3C016	B23Q   3/06	58	¾Τ	Others
B23Q   3/06 302 \	3	3	3C016	B23Q   3/06	0	ơݥ֥̤ˤĤ	Pressing onto the table surface
B23Q   3/06 302 A	3	0	3C016	B23Q   3/06	58	ήΰζȯ֤Ĥ	having a fluid pressure type tightening force generating device
B23Q   3/06 302 B	3	1	3C016	B23Q   3/06	133	ήεħ	characterized by the fluid component
B23Q   3/06 302 C	3	1	3C016	B23Q   3/06	147	ưݤľư	Direct action of the movable jaw
B23Q   3/06 302 D	3	1	3C016	B23Q   3/06	37	ưݤư	Movable jaw that rocks
B23Q   3/06 302 E	3	2	3C016	B23Q   3/06	42	ưȻδ֤ˤ	Drive point provided between the tightening point and fulcrum
B23Q   3/06 302 F	3	2	3C016	B23Q   3/06	162	ưδ֤ˤ	Fulcrum provided between the drive point and tightening point
B23Q   3/06 302 G	3	0	3C016	B23Q   3/06	136	㡥ܥȡʥĥȡζȯĤ	Mechanical type, e.g. having the bolt, nut, or cam tightening force generating mechanism
B23Q   3/06 302 H	3	1	3C016	B23Q   3/06	148	ưݤľư	Direct action of the movable jaw
B23Q   3/06 302 J	3	1	3C016	B23Q   3/06	31	ưݤư	Movable jaw that rocks
B23Q   3/06 302 K	3	2	3C016	B23Q   3/06	104	ưȻδ֤ˤ	Drive point provided between the tightening point and fulcrum
B23Q   3/06 302 L	3	2	3C016	B23Q   3/06	64	ưδ֤ˤ	Fulcrum provided between the drive point and tightening point
B23Q   3/06 302 M	3	1	3C016	B23Q   3/06	113	ʪι⤵˱ƹ⤵ѹ	Height changed according to the work's height
B23Q   3/06 302 Z	3	0	3C016	B23Q   3/06	46	¾Τ	Others
B23Q   3/06 303 \	3	3	3C016	B23Q   3/06	1	ϢưƺưʣΥǶ	caught by multiple clamp members that move in a linked manner
B23Q   3/06 303 A	3	0	3C016	B23Q   3/06	59	ήΰζȯ֤ˤ	using the fluid pressure type tightening force generating device
B23Q   3/06 303 B	3	1	3C016	B23Q   3/06	277	ưݤľư	Direct action of the movable jaw
B23Q   3/06 303 C	3	1	3C016	B23Q   3/06	160	ưݤư	Movable jaw that rocks
B23Q   3/06 303 D	3	0	3C016	B23Q   3/06	77	㡥ܥȡʥĥȡζȯĤ	Mechanical type, e.g. having the bolt, nut, or cam tightening force generating mechanism
B23Q   3/06 303 E	3	1	3C016	B23Q   3/06	280	ưݤľư	Direct action of the movable jaw
B23Q   3/06 303 F	3	1	3C016	B23Q   3/06	141	ưݤư	Movable jaw that rocks
B23Q   3/06 303 G	3	0	3C016	B23Q   3/06	269	İʾβưݤʪ濴ذư	At least three movable jaws that move toward the centre of the work
B23Q   3/06 303 Z	3	0	3C016	B23Q   3/06	59	¾Τ	Others
B23Q   3/06 304 \	3	3	3C016	B23Q   3/06	1	¾ιʪ	Other work fastening means
B23Q   3/06 304 A	3	0	3C016	B23Q   3/06	126	ǽʲưݤĤ	having a movable jaw that can be relieved
B23Q   3/06 304 B	3	1	3C016	B23Q   3/06	197	ưݤǲư	Movable jaw that rotates in the retaining plane
B23Q   3/06 304 C	3	0	3C016	B23Q   3/06	229	¿ΥݥƱ˥פ	Multiple works clamps simultaneously
B23Q   3/06 304 D	3	0	3C016	B23Q   3/06	220	बơݥ֥ʥѥĥȡ˾ˤ	Clamp member provided on the jig table (pallet)
B23Q   3/06 304 E	3	0	3C016	B23Q   3/06	106	ιơݥ֥ؤθ	Fastening the clamp member on the machine tool table
B23Q   3/06 304 F	3	0	3C016	B23Q   3/06	533	ʪιѤƥפ	Clamping by utilising the hole on the work
B23Q   3/06 304 G	3	0	3C016	B23Q   3/06	300	ʪγϵΤΥ	Clamping the outer surface of a cylindrical item or a spherical member
B23Q   3/06 304 H	3	0	3C016	B23Q   3/06	157	ʥ륯	Natural clamping
B23Q   3/06 304 J	3	0	3C016	B23Q   3/06	197	ݤιΤߤħ	characterized by the jaw configuration only
B23Q   3/06 304 K	3	0	3C016	B23Q   3/06	341	Ρ㤨վ֤θΡ	Detection, e.g. tightened state detection, safety device
B23Q   3/06 304 Z	3	0	3C016	B23Q   3/06	383	¾Τ	Others
B23Q   3/08  \	3	3	3C016	B23Q   3/08	9	Ūưˤʤ	other than mechanically-actuated
B23Q   3/08  A	3	0	3C016	B23Q   3/08	1856	ˤΡ̲ž夹Τޤ	using vacuum adsorption (including mounting on the rotary shaft)
B23Q   3/08  Z	3	0	3C016	B23Q   3/08	431	¾㡥ήΤ᤭ĤƤΡޤѤΡ	Others, e.g. retaining by spraying a fluid, using an adhesive
B23Q   3/10  \	2	2	3C016	B23Q   3/10	181	֡㡥ܥ륹­	Auxiliary devices, e.g. bolsters, extension members
B23Q   3/12  \	1	1	3C016	B23Q   3/12	16	ԥɥ˸夹뤿Τΰ̡ʣ£ѣͥ表å££	for securing to a spindle in general (B23Q 3/152 takes precedence; chucks B23B 31/02)
B23Q   3/12  A	1	0	3C016	B23Q   3/12	892	ۥݡ̥ۥ¦μ缴˼դʬħ	Tool holder (characterized by the holder part that is attached to the spindle)
B23Q   3/12  B	1	0	3C016	B23Q   3/12	247	ؤΤưɥݥСݤˤդ	Installation using the draw bar that moves in the axial direction only
B23Q   3/12  C	1	0	3C016	B23Q   3/12	239	ĥ󥸷	Quick change type
B23Q   3/12  D	1	1	3C016	B23Q   3/12	160	ܡݥѤ	using a ball
B23Q   3/12  E	1	0	3C016	B23Q   3/12	225	ݤˤַᡤơݥѡݥ	Alignment by a key, tapered shank
B23Q   3/12  F	1	0	3C016	B23Q   3/12	380	ԥɥ夵򴹥إĥɡ¿ɥѤϣ££	Replaceable head mounted on the spindle (multi-axial drilling B 23 B 47/30)
B23Q   3/12  G	1	0	3C016	B23Q   3/12	111	񥹥ԥɥ˼դ뤿̼ѡ	Supplementary instrument for attaching to the tool spindle (for installation operation)
B23Q   3/12  H	1	0	3C016	B23Q   3/12	66	žɥݥСݡ㡥ܥȤˤդ	Rotary draw bar, e.g. installation by the bolt
B23Q   3/12  J	1	0	3C016	B23Q   3/12	344	ԥɥؤΥݥθ̥ĥ££	Work fastening to the spindle (chuck R B 23 B 31/00)
B23Q   3/12  Z	1	0	3C016	B23Q   3/12	447	¾	Others
B23Q   3/14  \	2	2	3C016	B23Q   3/14	94	ޥɥ̡ʥѥ󥷥ޥɥ££	Mandrels in general (expansion mandrels B23B 31/40)
B23Q   3/15  \	1	1	3C016	B23Q   3/15	7	ʪľܺѤ뼧ŪޤŵŪϤѤƹʪݻ뤿	Devices for holding work using magnetic or electric force acting directly on the work
B23Q   3/15  A	1	0	3C016	B23Q   3/15	177	ʵ׼ФĤΡ̣¤ͥ	having a permanent magnet (B takes precedence.)
B23Q   3/15  B	1	0	3C016	B23Q   3/15	220	żФĤ	having an electromagnet
B23Q   3/15  C	1	1	3C016	B23Q   3/15	145	桤㡥ü򤹤֤Ĥ	Magnetic field control, e.g. having a degaussing device
B23Q   3/15  D	1	0	3C016	B23Q   3/15	876	ŵˤ	using static electricity
B23Q   3/15  Z	1	0	3C016	B23Q   3/15	134	¾	Others
B23Q   3/152  \	2	2	3C016	B23Q   3/152	1	ž	Rotary devices
B23Q   3/152  A	2	0	3C016	B23Q   3/152	23	ʵ׼ФĤΡ̣¤ͥ	having a permanent magnet (B takes precedence.)
B23Q   3/152  B	2	0	3C016	B23Q   3/152	98	żФĤ	having an electromagnet
B23Q   3/152  Z	2	0	3C016	B23Q   3/152	5	¾	Others
B23Q   3/154  \	2	2	3C016	B23Q   3/154	1	꼰	Stationary devices
B23Q   3/154  A	2	0	3C016	B23Q   3/154	157	ʵ׼ФĤΡ̣¤ͥ	having a permanent magnet (B takes precedence.)
B23Q   3/154  B	2	0	3C016	B23Q   3/154	155	żФĤ	having an electromagnet
B23Q   3/154  Z	2	0	3C016	B23Q   3/154	36	¾㡥	Others, e.g. supplementary instrument for clamping
B23Q   3/155  \	1	1	3C002	B23Q   3/155	259	μưդޤϼ賰	Arrangements for automatic insertion or removal of tools
B23Q   3/155  A	1	0	3C002	B23Q   3/155	239	פμư	Automatic tool replacement of a lathe
B23Q   3/155  B	1	0	3C002	B23Q   3/155	72	ĥפμư	Chip automatic replacement
B23Q   3/155  C	1	0	3C002	B23Q   3/155	16	եݥ󥰤μư	Facing automatic tool replacement
B23Q   3/155  D	1	0	3C002	B23Q   3/155	182	̹ľɽɽơ	Tool identification code (tool direct indication; indirect indication R 3/157 F)
B23Q   3/155  E	1	0	3C002	B23Q   3/155	205	̿»ι̣ơȡ	Tool management for tool life, breakage, etc. (Refer to 11/00 F, 17/09.)
B23Q   3/155  F	1	0	3C002	B23Q   3/155	761	ư򴹤αžѡ㡥򡤥ץࡤƥ	Automatic tool replacement operation technique, e.g. tool selection, programme, management system
B23Q   3/155  H	1	0	3C002	B23Q   3/155	223	ĥȤθ򴹡㡥Ѷ	Attachment replacement, e.g. cleaning instrument
B23Q   3/155  G	1	0	3C002	B23Q   3/155	281	ư򴹤ڶк	Measures against chips generated in automatic tool replacement
B23Q   3/155  K	1	0	3C002	B23Q   3/155	412	¾ιμư򴹡εѡ֥ݥѢ£ġ	Automatic tool replacement for other machine tools (for a particular mode; for the broach R B 23 D)
B23Q   3/155  Z	1	0	3C002	B23Q   3/155	248	¾㡥Ŷˤθ򴹡	Others, e.g. electrode replacement
B23Q   3/157  \	2	2	3C002	B23Q   3/157	1153	žΤ	of rotary tools
B23Q   3/157  A	2	0	3C002	B23Q   3/157	600	ݥ쥹ư򴹡̼缴¦򴹤Ρץȴѥɥθ򴹤ޤ	Armless automatic tool replacement (replacement from the inside of the spindle, including replacement of the drill for the printed board)
B23Q   3/157  B	2	0	3C002	B23Q   3/157	308	ޥؤι롦ؤ̥ޥߴ֤κؤޤࡨƻȡ	Tool replenishment or replacement in the tool magazine (including replacement between magazines; Refer to 41/00 F.)
B23Q   3/157  C	2	0	3C002	B23Q   3/157	680	ޥ㡥֡	Tool magazine, e.g. layout
B23Q   3/157  D	2	1	3C002	B23Q   3/157	99	ݥĥȤηư	Pot tilting mechanism
B23Q   3/157  E	2	1	3C002	B23Q   3/157	418	ݻ	Tool retention
B23Q   3/157  F	2	1	3C002	B23Q   3/157	250	ޥγФưμФ㡥ֹɼꡤ	Magazine indexing drive, tool removal preparation, e.g. tool number reading, memory
B23Q   3/157  G	2	1	3C002	B23Q   3/157	48	Ф	Shortcut indexing
B23Q   3/157  H	2	0	3C002	B23Q   3/157	80	ޥθ򴹡̣°ʳΤΡ㡥ޥء	Tool magazine replacement (other than B; e.g. magazine change-over)
B23Q   3/157  J	2	0	3C002	B23Q   3/157	82	ޥȥĥޥ󤫤ιμФ	Tool removal from the matrix type tool magazine
B23Q   3/157  K	2	0	3C002	B23Q   3/157	179	缴Υݹ礻	Spindle key setting
B23Q   3/157  L	2	0	3C002	B23Q   3/157	88	󥰥إĥɤθ򴹡̣££ȡ	Gang head replacement (Refer to B 23 B 39/16.)
B23Q   3/157  M	2	0	3C002	B23Q   3/157	640	ĥ󥰥ĥ׼󥰥ݥ㡥Ļݥζưʥ󥰥ǤʤΤޤˡ	Twin grip type swing arm, e.g. holder, arm drive (including those which cannot be identified as the single one)
B23Q   3/157  N	2	1	3C002	B23Q   3/157	105	ȥߤ	provided on the shuttle
B23Q   3/157  P	2	1	3C002	B23Q   3/157	56	ʾ󼴤βǲžΡ̣Τͥ	Rotation around at least two swing axes (N takes precedence.)
B23Q   3/157  Q	2	0	3C002	B23Q   3/157	96	󥰥륰ĥץ󥸥	Single grip changer
B23Q   3/157  R	2	0	3C002	B23Q   3/157	210	ѥȥϥ󥰥륰ĥץݥߤΡιΤĤѥȥϥ󥰥ĥץݥǤΡ	via the relay shuttle or single grip arm (one of the overall configuration is a relay shuttle or single grip arm)
B23Q   3/157  S	2	0	3C002	B23Q   3/157	21	ĤΥ󥰥륰ĥץ󥸥ݤѤ	using two single grip changers
B23Q   3/157  T	2	0	3C002	B23Q   3/157	78	ޥȼ缴֤ñι򴹼ʤ⤦Ρ̣ҰʳΤΡ	Single tool replacement means provided between the tool magazine and spindle (other than R)
B23Q   3/157  W	2	0	3C002	B23Q   3/157	67	ĥȥߥιϥإĥɤμư򴹡㡥ԣեĥȡ	Turret mill tool or head automatic replacement, e.g. turret with ATC
B23Q   3/157  X	2	0	3C002	B23Q   3/157	27	ߤľѤʸ̤ùǤ빩ι	Tool replacement for the machine tool that can machine five planes which are perpendicular to each other
B23Q   3/157  Y	2	0	3C002	B23Q   3/157	76	¿פμư	Multi-axial machine automatic tool replacement
B23Q   3/157  Z	2	0	3C002	B23Q   3/157	250	¾㡥⥸鹩	Others, e.g. modular tool
B23Q   3/16  \	1	1	3C016	B23Q   3/16	56	Ϣư椵	controlled in conjunction with the operation of the tool
B23Q   3/18  \	1	1	3C016	B23Q   3/18	25	ַΤΤߤΤ	for positioning only
B23Q   3/18  A	1	0	3C016	B23Q   3/18	708	ȥĥѡݤˤ	using a stopper
B23Q   3/18  B	1	0	3C016	B23Q   3/18	792	ԥˤ	Pin insertion
B23Q   3/18  C	1	0	3C016	B23Q   3/18	547	ž濴礻뤿Τ	for aligning the rotation centre
B23Q   3/18  D	1	0	3C016	B23Q   3/18	302	ٰ֤ꤹ뤿Τ	for determining the angular position
B23Q   3/18  Z	1	0	3C016	B23Q   3/18	663	¾	Others
B23Q   5/00  \	0	0	3C019	B23Q   5/00	44	ưޤΤεΤ֡ʼư£ѣ襤£ѣ£ѣ椰פޤϥܡפΤ̤ղäΣ££££	Driving or feeding mechanisms; Control arrangements therefor (automatic control B23Q 15/00; copying B23Q 33/00, B23Q 35/00; specially adapted for boring or drilling machines B23B 39/10, B23B 47/02)
B23Q   5/02  \	1	1	3C019	B23Q   5/02	17	ùΤζư	Driving main working members
B23Q   5/027  \	2	2	3C019	B23Q   5/027	119	ư򤹤Σ	reciprocating members [2]
B23Q   5/033  \	3	3	3C019	B23Q   5/033	37	ܼŪήΰϤˤäƶưΡΣ	driven essentially by fluid pressure [2]
B23Q   5/04  \	2	2	3C019	B23Q   5/04	1	ž㡥ù缴	rotary shafts, e.g. working-spindles
B23Q   5/04  F	2	0	3C019	B23Q   5/04	43	缴βߤᡢĥ̳Ф	Spindle rotation stop, lock (indexing R 5/20)
B23Q   5/04  Z	2	0	3C019	B23Q   5/04	219	¾	Others
B23Q   5/04 510 \	3	3	3C019	B23Q   5/04	2	缴ؤβžã	Mechanism for transmitting the rotation force to the spindle
B23Q   5/04 510 B	3	0	3C019	B23Q   5/04	15	λ	using a flexible shaft
B23Q   5/04 510 C	3	0	3C019	B23Q   5/04	134	̵üӾ㡧٥ȡݥ󡤥磻ͤλ	using the endless band type flexible member, e.g. belt, chain, wire
B23Q   5/04 510 D	3	0	3C019	B23Q   5/04	59	໤ؤλ	using the friction wheel
B23Q   5/04 510 F	3	0	3C019	B23Q   5/04	62	ĥץ󥰤λ	using the clutch or coupling
B23Q   5/04 510 G	3	0	3C019	B23Q   5/04	27	ե饤ۥݥλ	using the flywheel
B23Q   5/04 510 H	3	0	3C019	B23Q   5/04	132	ʣؤã㡧¿ס	Transmission to multiple axes, e.g. multi-axial machine
B23Q   5/04 510 J	3	1	3C019	B23Q   5/04	21	μŪ˶ưΡ㡧ĥȡ	Driving a particular axis selectively, e.g. turret
B23Q   5/04 510 Z	3	0	3C019	B23Q   5/04	84	¾	Others
B23Q   5/04 520 \	3	3	3C019	B23Q   5/04	1	缴˼դ륢ĥ	Attachment installed on the spindle
B23Q   5/04 520 B	3	0	3C019	B23Q   5/04	144	®ϵž	for acceleration/deceleration or reverse rotation
B23Q   5/04 520 C	3	0	3C019	B23Q   5/04	118	缴ȽϼȤ٤ʤΡ㡧󥰥ɥ饤֡	Angle formed between the spindle and output axis, e.g. angle drive
B23Q   5/04 520 D	3	0	3C019	B23Q   5/04	66	缴ȽϼȤΡ㡧եĥȥɥ饤֡	Output axis deviating from the spindle, e.g. offset drive
B23Q   5/04 520 Z	3	0	3C019	B23Q   5/04	152	¾	Others
B23Q   5/04 530 \	3	3	3C019	B23Q   5/04	0	缴žưϤ	Spindle rotation drive control
B23Q   5/04 530 B	3	0	3C019	B23Q   5/04	17	ŵŪ	Electrical control
B23Q   5/04 530 C	3	1	3C019	B23Q   5/04	6	žٰ֤	Rotation angular position control
B23Q   5/04 530 D	3	1	3C019	B23Q   5/04	37	ž®ϲø®	Rotation speed or acceleration/deceleration control
B23Q   5/04 530 F	3	1	3C019	B23Q   5/04	16	ưݥ󥹤	Operation or sequence control
B23Q   5/04 530 G	3	0	3C019	B23Q   5/04	14	桤ԥݥ	Numerical control, computer control
B23Q   5/04 530 H	3	1	3C019	B23Q   5/04	12	žٰ֤	Rotation angular position control
B23Q   5/04 530 J	3	1	3C019	B23Q   5/04	29	ž®ϲø®	Rotation speed or acceleration/deceleration control
B23Q   5/04 530 K	3	1	3C019	B23Q   5/04	19	ưݥ󥹤	Operation or sequence control
B23Q   5/04 530 Z	3	0	3C019	B23Q   5/04	14	¾	Others
B23Q   5/06  \	3	3	3C019	B23Q   5/06	110	ܼŪήΰޤ϶ˤư	driven essentially by fluid pressure or pneumatic power
B23Q   5/08  \	4	4	3C019	B23Q   5/08	98	ŵŪ椵	electrically controlled
B23Q   5/10  \	3	3	3C019	B23Q   5/10	176	ܼŪŵŪʤˤư	driven essentially by electrical means
B23Q   5/12  \	3	3	3C019	B23Q   5/12	92	®ѹ뤿μʤĵŪư	Mechanical drives with means for varying the speed ratio
B23Q   5/14  \	4	4	3C019	B23Q   5/14	7	ʳŪ®	step-by-step
B23Q   5/14  B	4	0	3C019	B23Q   5/14	90	ڴ֤ˤ	using a change-over gear
B23Q   5/14  C	4	1	3C019	B23Q   5/14	21	ڴ	Change-over operation means
B23Q   5/14  Z	4	0	3C019	B23Q   5/14	35	¾	Others
B23Q   5/16  \	4	4	3C019	B23Q   5/16	20	̵®	infinitely-variable
B23Q   5/18  \	4	4	3C019	B23Q   5/18	10	ù缴®٤򤹤뤿	Devices for preselecting speed of working-spindle
B23Q   5/20  \	3	3	3C019	B23Q   5/20	0	֤ؼ缴Ĵޤߤ	Adjusting or stopping working-spindles in a predetermined position
B23Q   5/20  A	3	0	3C019	B23Q   5/20	53	Ѥ	utilising a cam
B23Q   5/20  B	3	0	3C019	B23Q   5/20	9	Фĥλ	using an indexing clutch
B23Q   5/20  C	3	0	3C019	B23Q   5/20	64	Фԥ󡤥ȥĥѤλ	using the indexing pin or stopper
B23Q   5/20  D	3	0	3C019	B23Q   5/20	43	ַѥݥĤ	having an alignment motor
B23Q   5/20  Z	3	0	3C019	B23Q   5/20	148	¾㡥ԣûβߤ	Others, e.g. rotation stop in ATC
B23Q   5/22  \	1	1	3C019	B23Q   5/22	2	ޤϹʪٻ	Feeding members carrying tools or work
B23Q   5/22  G	1	0	3C019	B23Q   5/22	181	ưޤ	including manual feed
B23Q   5/22  H	1	1	3C019	B23Q   5/22	24	ϥɥ˴ؤ	related to the feed handle
B23Q   5/22  J	1	1	3C019	B23Q   5/22	112	ѥ륹ΤΤ	for pulse feed
B23Q   5/22  Z	1	0	3C019	B23Q   5/22	92	¾	Others
B23Q   5/22 520 \	2	2	3C019	B23Q   5/22	0	̤εǽ̣ͥ	Special feed function (5/34 520 takes precedence.)
B23Q   5/22 520 B	2	0	3C019	B23Q   5/22	70	ۤʤȹ碌ˤ®٤ڴ	Feed speed change-over by a combination of different type feed means
B23Q   5/22 520 C	2	0	3C019	B23Q   5/22	167		Fine feed
B23Q   5/22 520 D	2	0	3C019	B23Q   5/22	50	Ťˤɻ	Prevention of drop due to the dead weight
B23Q   5/22 520 F	2	0	3C019	B23Q   5/22	30	žѰ̡߱ư	generating the rotation displacement or circular motion
B23Q   5/22 520 G	2	0	3C019	B23Q   5/22	4	ưϤΰưɻߡĥ̰ưΥע	Feed drive system moving prevention, lock (moving stand clamping R 1/28)
B23Q   5/22 520 Z	2	0	3C019	B23Q   5/22	41	¾	Others
B23Q   5/22 530 \	2	2	3C019	B23Q   5/22	1	ưϤ	Feed drive system control
B23Q   5/22 530 B	2	0	3C019	B23Q   5/22	92	ŵŪ	Electrical control
B23Q   5/22 530 C	2	1	3C019	B23Q   5/22	147	֤	Feed position control
B23Q   5/22 530 D	2	1	3C019	B23Q   5/22	112	®ϲø®	Feed speed or acceleration/deceleration control
B23Q   5/22 530 F	2	1	3C019	B23Q   5/22	155	ưݥ󥹤	Operation or sequence control
B23Q   5/22 530 G	2	0	3C019	B23Q   5/22	120	桤ԥݥ	Numerical control, computer control
B23Q   5/22 530 H	2	1	3C019	B23Q   5/22	187	֤	Feed position control
B23Q   5/22 530 J	2	1	3C019	B23Q   5/22	79	®ϲø®	Feed speed or acceleration/deceleration control
B23Q   5/22 530 K	2	1	3C019	B23Q   5/22	76	ưݥ󥹤	Operation or sequence control
B23Q   5/22 530 Z	2	0	3C019	B23Q   5/22	18	¾	Others
B23Q   5/26  \	2	2	3C019	B23Q   5/26	1	ήΰưΣ	Fluid-pressure drives [3]
B23Q   5/26  A	2	0	3C019	B23Q   5/26	96	äŵŪ椵	electrically controlled in particular
B23Q   5/26  B	2	0	3C019	B23Q   5/26	77	ȶʻѤ®٤ڴ	Feed speed change-over using the oil pressure and air pressure
B23Q   5/26  C	2	0	3C019	B23Q   5/26	250	ήΰι¤ħ	characterized by the structure of the fluid pressure component
B23Q   5/26  D	2	1	3C019	B23Q   5/26	223	ԥȥ󥷥ιħ	characterized by the piston cylinder configuration
B23Q   5/26  E	2	1	3C019	B23Q   5/26	183	Х֤ιħ	characterized by the valve configuration
B23Q   5/26  F	2	0	3C019	B23Q   5/26	229	ήΰϩιħ	characterized by the configuration of the fluid pressure circuit
B23Q   5/26  G	2	0	3C019	B23Q   5/26	158	®ڴΤΤ	for speed change-over
B23Q   5/26  H	2	0	3C019	B23Q   5/26	162	¿ʳַΤΤ	for multi-stage alignment
B23Q   5/26  J	2	1	3C019	B23Q   5/26	75	󥿡ݥХեݥ	Interval feed
B23Q   5/26  K	2	1	3C019	B23Q   5/26	14	ƥĥץեݥ	Step feed
B23Q   5/26  L	2	0	3C019	B23Q   5/26	101	ưڴ	Reciprocal motion change-over
B23Q   5/26  X	2	0	3C019	B23Q   5/26	251	ήΰ	Handy fluid pressure tool
B23Q   5/26  Y	2	1	3C019	B23Q   5/26	15	ȥ륯	Torque control
B23Q   5/26  Z	2	0	3C019	B23Q   5/26	311	¾	Others
B23Q   5/28  \	2	2	3C019	B23Q   5/28	33	ŵŪưΣ	Electric drives [3]
B23Q   5/28  B	2	0	3C019	B23Q   5/28	456	˥ݥ㡧ܥͤλ	using the linear motor or coil, e.g. voice coil
B23Q   5/28  C	2	0	3C019	B23Q   5/28	228	Ѱǻҡ㡧šġġǻҡͤλ	using the solid displacement device, e.g. piezoelectric, electrostrictive, or magnetostrictive device
B23Q   5/28  Z	2	0	3C019	B23Q   5/28	186	¾	Others
B23Q   5/32  \	2	2	3C019	B23Q   5/32	115	ù缴ʲù缴ٻ£ѣˡΣ	Feeding working-spindles (feeding working-spindle supports B23Q 5/34) [3]
B23Q   5/34  \	2	2	3C019	B23Q   5/34	1	ޤϹʪٻ¾ࡤ㡥ɥ롤ư桤εŪã֤𤷤ƤΣ	Feeding other members supporting tools or work, e.g. saddles, tool-slides, through mechanical transmission [3]
B23Q   5/34  G	2	0	3C019	B23Q   5/34	203	ưޤΡ̥ѥ륹ȯˤΤޤ	including manual feed (including those by pulse generation)
B23Q   5/34  Z	2	0	3C019	B23Q   5/34	130	¾	Others
B23Q   5/34 510 \	3	3	3C019	B23Q   5/34	1	ư	Feed drive mechanism
B23Q   5/34 510 B	3	0	3C019	B23Q   5/34	334	λ	using a cam
B23Q   5/34 510 C	3	1	3C019	B23Q   5/34	246	ȰưϢ㡧եͤħ	characterized by the connection between the cam and moving stand, e.g. cam follower
B23Q   5/34 510 D	3	1	3C019	B23Q   5/34	184	ऽΤΤι̷¤ͤħ	characterized by the cam per se (shape, structure, etc.)
B23Q   5/34 510 F	3	0	3C019	B23Q   5/34	358	󥯡Сݤλ	using the link or lever
B23Q   5/34 510 Z	3	0	3C019	B23Q   5/34	92	¾	Others
B23Q   5/34 520 \	3	3	3C019	B23Q   5/34	0	̤εǽ	Special feed function
B23Q   5/34 520 B	3	0	3C019	B23Q   5/34	55	ۤεŪʤȹ碌ˤ®٤ڴ	Feed speed change-over by a combination of different type mechanical feed means
B23Q   5/34 520 C	3	0	3C019	B23Q   5/34	255		Fine feed
B23Q   5/34 520 D	3	0	3C019	B23Q   5/34	64	Ťˤɻ	Prevention of drop due to the dead weight
B23Q   5/34 520 F	3	0	3C019	B23Q   5/34	101	žѰ̡߱ư	generating the rotation displacement or circular motion
B23Q   5/34 520 G	3	0	3C019	B23Q   5/34	22	ưϤΰưɻߡĥ̰ưΥע	Feed drive system moving prevention, lock (moving stand clamping R 1/28)
B23Q   5/34 520 Z	3	0	3C019	B23Q   5/34	90	¾	Others
B23Q   5/36  \	3	3	3C019	B23Q   5/36	378	ǡܥ⡼ԲķǤȤƹΡΣ	in which a servomotor forms an essential element [3]
B23Q   5/38  \	3	3	3C019	B23Q   5/38	7	Ϣ³ŪΣ	feeding continuously [3]
B23Q   5/38  B	3	0	3C019	B23Q   5/38	121	Ӿ㡧٥ȡݥ󡤥磻ͤλ	using the band type flexible member, e.g. belt, chain, wire
B23Q   5/38  C	3	0	3C019	B23Q   5/38	80	໤ؤλ	using a friction wheel
B23Q   5/38  D	3	0	3C019	B23Q   5/38	241	ĥλ	using a rack
B23Q   5/38  Z	3	0	3C019	B23Q   5/38	20	¾	Others
B23Q   5/40  \	4	4	3C019	B23Q   5/40	179	꼴㡥ƤͤˤΡΣ	by feed shaft, e.g. lead screw [3]
B23Q   5/40  B	4	0	3C019	B23Q   5/40	155	꼴λٻ	Feed shaft supporting
B23Q   5/40  C	4	0	3C019	B23Q   5/40	126		Error correction
B23Q   5/40  D	4	0	3C019	B23Q   5/40	161	ͤȥʥĥȤȤηħ	characterized by engagement between the threaded shaft and nut
B23Q   5/40  F	4	0	3C019	B23Q   5/40	120	ʥĥȤž	Rotation of the nut
B23Q   5/40  G	4	1	3C019	B23Q   5/40	31	ͤʥĥȤž	Rotation of both threaded shaft and nut
B23Q   5/40  Z	4	0	3C019	B23Q   5/40	499	¾	Others
B23Q   5/42  \	5	5	3C019	B23Q   5/42	23	缴˴ϢΣ	Mechanism associated with headstock [3]
B23Q   5/42  B	5	0	3C019	B23Q   5/42	71	꼴βžư	Feed shaft rotation drive
B23Q   5/42  C	5	1	3C019	B23Q   5/42	57	®٤ѹ	Speed change
B23Q   5/42  Z	5	0	3C019	B23Q   5/42	143	¾	Others
B23Q   5/44  \	5	5	3C019	B23Q   5/44	135	ư˴ϢΣ	Mechanism associated with the moving member [3]
B23Q   5/44  B	5	0	3C019	B23Q   5/44	86	ʥĥȤȰưȤηħ	characterized by the coupling between the nut and moving stand
B23Q   5/44  C	5	1	3C019	B23Q   5/44	45	ʥĥȤưǽ	Nut that can rock
B23Q   5/44  D	5	1	3C019	B23Q   5/44	10	ʥĥȤͤư	Nut lifted in the threaded shaft direction
B23Q   5/44  F	5	1	3C019	B23Q   5/44	79	ʥĥȤͤ˿ľư	Nut lifted in a plane that is perpendicular to the threaded shaft
B23Q   5/44  G	5	0	3C019	B23Q   5/44	9	ʥĥȤȤͤηæ㡧ϡݥեʥĥȤγݤ	Engagement/disengagement between the nut and threaded shaft, e.g. half nut setting/removal
B23Q   5/44  H	5	0	3C019	B23Q   5/44	23	ʥĥȤΤΤιħ	characterized by the configuration of the nut per se
B23Q   5/44  Z	5	0	3C019	B23Q   5/44	331	¾	Others
B23Q   5/46  \	4	4	3C019	B23Q   5/46	8	®ĤΡΣ	with variable speed ratio [3]
B23Q   5/48  \	5	5	3C019	B23Q   5/48	86	֤λѤˤΡΣ	by use of toothed gears [3]
B23Q   5/50  \	3	3	3C019	B23Q   5/50	1	ʳŪΣ	feeding step by step [3]
B23Q   5/50  A	3	0	3C019	B23Q   5/50	92	󥿡ݥХեݥ	Interval feed
B23Q   5/50  C	3	1	3C019	B23Q   5/50	38	ήΰΤߤˤ	Feed by the fluid pressure only
B23Q   5/50  D	3	1	3C019	B23Q   5/50	27	ˤ	using numerical control
B23Q   5/50  F	3	0	3C019	B23Q   5/50	145	ƥĥץեݥ	Step feed
B23Q   5/50  G	3	0	3C019	B23Q   5/50	28	ưں	Vibration cutting
B23Q   5/50  Z	3	0	3C019	B23Q   5/50	86	¾	Others
B23Q   5/52  \	2	2	3C019	B23Q   5/52	0		Limiting feed movement
B23Q   5/52  A	2	0	3C019	B23Q   5/52	271	ȥĥѤλ	using a stopper
B23Q   5/52  C	2	1	3C019	B23Q   5/52	104	¿ʥȥĥ	Multi-stage stopper
B23Q   5/52  D	2	2	3C019	B23Q   5/52	44	žФ	Rotation indexing type
B23Q   5/52  F	2	1	3C019	B23Q   5/52	77	ȥĥѤΰĴ	Stopper position adjustment
B23Q   5/52  G	2	1	3C019	B23Q   5/52	53	ȥĥѤΤΤι	Configuration of the stopper per se
B23Q   5/52  H	2	1	3C019	B23Q   5/52	34	ܻξ׷ۼ	Shock absorption upon hitting
B23Q   5/52  J	2	1	3C019	B23Q   5/52	84	ܤθ	Hitting detection
B23Q   5/52  K	2	2	3C019	B23Q   5/52	16	ˤ븡	Detection by air
B23Q   5/52  L	2	0	3C019	B23Q   5/52	191	ɥߥĥȥĥλ	using the dog or limit switch
B23Q   5/52  M	2	1	3C019	B23Q   5/52	87	դħ̰Ĵޤ	characterized by the attached part (including position adjustment)
B23Q   5/52  N	2	1	3C019	B23Q   5/52	32	ɥηħ	characterized by the dog shape
B23Q   5/52  P	2	0	3C019	B23Q   5/52	202	֤θФħ	characterized by feed position detection
B23Q   5/52  Q	2	0	3C019	B23Q   5/52	79	ưħ	characterized by feed drive
B23Q   5/52  Z	2	0	3C019	B23Q   5/52	450	¾	Others
B23Q   5/54  \	1	1	3C019	B23Q   5/54	3	롼ף£ѣޤϥ롼ף£ѣ˳ơꤵʤ֤ޤϺ	Arrangements or details not restricted to group B23Q 5/02 or group B23Q 5/22 respectively
B23Q   5/54  A	1	0	3C019	B23Q   5/54	188	ư̥֥ݥ	Brake
B23Q   5/54  B	1	0	3C019	B23Q   5/54	73	ݥ󥷥	Sequential control
B23Q   5/54  Z	1	0	3C019	B23Q   5/54	134	¾̣°ʳ̾ʬ	Others (other than A and B normally categorized into 5/00 Z)
B23Q   5/56  \	2	2	3C019	B23Q   5/56	1	ط	Preventing backlash
B23Q   5/56  A	2	0	3C019	B23Q   5/56	115	֡ĥ	Gear, rack
B23Q   5/56  B	2	0	3C019	B23Q   5/56	63	ط̤	Backlash volume correction
B23Q   5/56  Z	2	0	3C019	B23Q   5/56	218	¾	Others
B23Q   5/58  \	2	2	3C019	B23Q   5/58	137		Safety devices
B23Q   5/58  B	2	0	3C019	B23Q   5/58	208	٤ꤹΡɻ	Load limitation, overload prevention
B23Q   5/58  C	2	0	3C019	B23Q   5/58	46	®٤ꤹΡ®ɻ	Speed limitation, over-speed limitation
B23Q   5/58  D	2	0	3C019	B23Q   5/58	134	ưϰϤꤹΡɻ	Moving range limitation, overrun prevention
B23Q   5/58  F	2	0	3C019	B23Q   5/58	72	ȼԤΰ󥿥ĥ	Operator safety, interlock
B23Q   5/58  Z	2	0	3C019	B23Q   5/58	167	¾	Others
B23Q   7/00  \	0	0	3C033	B23Q   7/00	268	ä˹֤ޤȹ礵졤ޤϹȴϢƻѤ뤿äŬʪ谷֡㡥¡դ֤ĴӽС̤ΤΤΡʲùԥɥ˷礷Σ££££ưޤȾưפΤΤΣ££ˡΣ	Arrangements for handling work specially combined with or arranged in, or specially adapted for use in connection with, machine tools, e.g. for conveying, loading, positioning, discharging, sorting (incorporated in working-spindles B23B 13/00, B23B 19/02; for automatic or semi-automatic turning machines B23B 15/00) [2]
B23Q   7/00  A	0	0	3C033	B23Q   7/00	312	ӽ뤿ΤߤѤ	used for elimination only
B23Q   7/00  B	0	0	3C033	B23Q   7/00	48	ˤ	using a spiral feed member
B23Q   7/00  C	0	0	3C033	B23Q   7/00	266	եȥɥݱưˤΡ̡̰£ǣȥ󥹥եݥСݤˤΡƻȡ	using the lift and carry motion (in general B 65 G 25/00; Refer to 39/04 F for using the transfer bar.)
B23Q   7/00  D	0	0	3C033	B23Q   7/00	633	ʪȿžϲžΤ̡̰֡£ǣ	Device for inverting or laying down the work (in general B 65 G 47/22, 47/90)
B23Q   7/00  E	0	0	3C033	B23Q   7/00	960	ѥĥȤѤޤ½ФԤʤ	Carrying in/out using a pallet
B23Q   7/00  F	0	1	3C033	B23Q   7/00	301	ѥĥȥ󥸥	Pallet changer
B23Q   7/00  G	0	2	3C033	B23Q   7/00	319	󤹤ѥĥȺĤ	having a pallet mounting stand that swings
B23Q   7/00  H	0	2	3C033	B23Q   7/00	252	ľưѥĥȺĤ	having a pallet mounting stand that performs direct action
B23Q   7/00  J	0	1	3C033	B23Q   7/00	303	ѥĥȤι¤̥ݥΥע	Pallet structure (work clamping R 3/06)
B23Q   7/00  M	0	0	3C033	B23Q   7/00	192	֤ȰΤˤʤĤ׿	Counting/inspection device unitised with the feed device
B23Q   7/00  Z	0	0	3C033	B23Q   7/00	760	¾	Others
B23Q   7/02  \	1	1	3C033	B23Q   7/02	23	ɥޤϲžơ֥ޤϲžĤμʤˤ	by means of drums or rotating tables or discs
B23Q   7/02  A	1	0	3C033	B23Q   7/02	182	Ϥ˹ʪƤͭžˤΡֿޡ	using a rotary member having concavities around it to accept the work, [figure]
B23Q   7/02  B	1	0	3C033	B23Q   7/02	181	ʪݻĲžˤΡֿޡ	using a rotary member having a member that holds the work, [figure]
B23Q   7/02  Z	1	0	3C033	B23Q   7/02	117	¾	Others
B23Q   7/03  \	1	1	3C033	B23Q   7/03	58	̵ü󥳥٥䡼ʤˤΡʣ£ѣͥˡΣ	by means of endless chain conveyors () [2]
B23Q   7/03  A	1	0	3C033	B23Q   7/03	232	̵üݥ󥳥٥ݼʤľ֤ܺޤ϶뤳ȤˤĤ	Feed by directly mounting on or catching by an endless chain conveyer means
B23Q   7/03  B	1	0	3C033	B23Q   7/03	241	̵ü٥ݼʤ˼դ줿ʪݻࡤ㡥եĥХĥȤˤĤ	Work holding member attached to the endless conveyer means, e.g. feed by the hook or packet
B23Q   7/03  Z	1	0	3C033	B23Q   7/03	122	¾	Others
B23Q   7/04  \	1	1	3C033	B23Q   7/04	20	ʤˤ	by means of grippers
B23Q   7/04  A	1	0	3C033	B23Q   7/04	700	ʤˤʤޤƥ	Feed system including the feed means by holding
B23Q   7/04  B	1	0	3C033	B23Q   7/04	737	ʤե󥬡ݡϥι¤ħ	characterized by the structure of the holder e.g. finger, hand
B23Q   7/04  J	1	1	3C033	B23Q   7/04	266	ե󥬡ݤˤ밮̣£ʣȡ	Holding by the finger (Refer to B 25 J 15/08.)
B23Q   7/04  K	1	1	3C033	B23Q   7/04	564	ˤĻ̡̰£ʣ	Holding by an adsorbing member (in general B 25 J 15/06)
B23Q   7/04  L	1	1	3C033	B23Q   7/04	138	ϥι¤㡥֥ϥɷ	Hand structure, e.g. double hand type
B23Q   7/04  C	1	0	3C033	B23Q   7/04	336	ưӤ˼դ줿ʤˤ	using a holding means attached to a rocking arm
B23Q   7/04  M	1	1	3C033	B23Q   7/04	175	¿ᥢݥ෿	Multi-joint arm type
B23Q   7/04  N	1	1	3C033	B23Q   7/04	23	ѥ󥯥ݥ෿	Parallel link arm type
B23Q   7/04  D	1	1	3C033	B23Q   7/04	104	̤ʼβư롤ʣưӤĤ	having multiple rocking arms that rock around different axes
B23Q   7/04  E	1	0	3C033	B23Q   7/04	405	ʤľư	Direct action of the holding means
B23Q   7/04  P	1	1	3C033	B23Q   7/04	56	̤륢ݥ˼դ줿ʤˤΡ̰ʤ饸륢ݥ𤷤ƿ̥ݥ˼դ줿΢ҡ	using the holding means attached to the extendable arm or bar (holding means attached to the extendable arm via a radial arm R 7/04 R)
B23Q   7/04  Q	1	1	3C033	B23Q   7/04	44	ʤݥĹΤޤǲưΡ㡥Ѵ	Holding means that rotates around the arm's axis in the length direction, e.g. for changing the direction
B23Q   7/04  F	1	1	3C033	B23Q   7/04	71	ʤʣο̥ݥޤϥĥɤĤ	having multiple extendable arms or rods with the holding means
B23Q   7/04  R	1	1	3C033	B23Q   7/04	248	ʤ֡ϥ饤˼դ줿	Holding means attached to the reciprocal cart or slide member
B23Q   7/04  G	1	0	3C033	B23Q   7/04	162	켴βǲưư¿ݥ˼դ줿ʤĤ	having the holding means attached to the multi-branch arm that rotates or rocks around an axis
B23Q   7/04  H	1	0	3C033	B23Q   7/04	295	ưľưѤӤĤΡֿޡ	having an arm using both rocking and direct action, [figure]
B23Q   7/04  Z	1	0	3C033	B23Q   7/04	269	¾	Others
B23Q   7/05  \	1	1	3C033	B23Q   7/05	225	顼ʤˤΡʣ£ѣͥˡΣ	by means of roller-ways (B23Q 7/16 takes precedence) [2]
B23Q   7/05  A	1	0	3C033	B23Q   7/05	168	򶴻ݥݤˤĤ	Feed by rollers that catch the material
B23Q   7/05  Z	1	0	3C033	B23Q   7/05	279	¾	Others
B23Q   7/06  \	1	1	3C033	B23Q   7/06	190	ץå㡼ˤ	by means of pushers
B23Q   7/06  A	1	0	3C033	B23Q   7/06	20	ưץĥݤĤΡֿޡ	having a rotary pusher, [figure]
B23Q   7/06  Z	1	0	3C033	B23Q   7/06	343	¾	Others
B23Q   7/08  \	1	1	3C033	B23Q   7/08	4	ưޤϳʤˤ	by means of slides or chutes
B23Q   7/08  A	1	0	3C033	B23Q   7/08	341	ݥȤˤ	using a chute
B23Q   7/08  C	1	1	3C033	B23Q   7/08	100	ݥȤùʪļФʬΥ֤Ĥ	having a separation device to take a certain number of works from the chute
B23Q   7/08  B	1	0	3C033	B23Q   7/08	185	饤ɤˤ	using slide
B23Q   7/08  Z	1	0	3C033	B23Q   7/08	48	¾	Others
B23Q   7/10  \	1	1	3C033	B23Q   7/10	469	ޥʤˤ	by means of magazines
B23Q   7/12  \	1	1	3C033	B23Q   7/12	205		Sorting arrangements
B23Q   7/14  \	1	1	3C033	B23Q   7/14	623	饤Ȥ߹ޤ줿	co-ordinated in production lines
B23Q   7/16  \	1	1	3C033	B23Q   7/16	221	٥䡼عʪǥ󥰤Ρ٥䡼ιʪ󤹤Ρ㡥ġιʪδ֤δֳ֤ѹΡΣ	Loading work on to conveyors; Arranging work on conveyors, e.g. varying spacing between individual workpieces [2]
B23Q   7/18  \	2	2	3C033	B23Q   7/18	133	٥䡼ǹʪΡΣ	Orienting work on conveyors [2]
B23Q   9/00  \	0	0	3C048	B23Q   9/00	2	Ӽ°ùޤ֤λٻޤϰΤ֡ʹΤΤΣ££ѥפΥåԥ󥰤ΤΤΣ££	Arrangements for supporting or guiding portable metal-working machines or apparatus (for tapping pipes B23B 41/08; specially designed for drilling B23B 45/14)
B23Q   9/00  A	0	0	3C048	B23Q   9/00	86	Фˤ	using a magnet
B23Q   9/00  B	0	0	3C048	B23Q   9/00	20	ˤ	using vacuum
B23Q   9/00  Z	0	0	3C048	B23Q   9/00	205	¾	Others
B23Q   9/02  \	1	1	3C048	B23Q   9/02	0	ޤ֤ιʪޤ¾ʬ㡥̷Υӡ˸夹뤿Τ	for securing machines or apparatus to workpieces, or other parts, of particular shape, e.g. to beams of particular cross-section
B23Q   9/02  A	1	0	3C048	B23Q   9/02	20	Фˤ	using a magnet
B23Q   9/02  B	1	0	3C048	B23Q   9/02	10	ˤ	using vacuum
B23Q   9/02  Z	1	0	3C048	B23Q   9/02	79	¾	Others
B23Q  11/00  \	0	0	3C011	B23Q  11/00	42	ޤϵʬɤȾ֤˰ݻ뤿ޤϹʪѤ뤿˹˼Ĥ°֡ä˹ޤȹ礻Ƥ⤷Ϲȶ˻Ѥ뤿դä֡椰פޤϥܡפ˴ؤƤϣ££££ͥ表ְ̣ƣС	Accessories fitted to machine tools for keeping tools or parts of the machine in good working condition or for cooling work; Safety devices specially combined with or arranged in, or specially adapted for use in connection with, machine tools (in respect of boring or drilling machines B23B 47/24, B23B 47/32 take precedence; safety devices in general F16P)
B23Q  11/00  A	0	0	3C011	B23Q  11/00	789	ưɻߤΤ	Vibration preventive device
B23Q  11/00  B	0	1	3C011	B23Q  11/00	294	žΤΥХ	Rotor balancing device
B23Q  11/00  C	0	0	3C011	B23Q  11/00	290	ɻߤΤ	Interference preventive device
B23Q  11/00  D	0	0	3C011	B23Q  11/00	1024	ϺȼԤΰ	Safety device for the machine or operator
B23Q  11/00  E	0	0	3C011	B23Q  11/00	317	СݤѤʤݥ	Sealing device not using the cover
B23Q  11/00  F	0	0	3C011	B23Q  11/00	240		Tool management
B23Q  11/00  K	0	0	3C011	B23Q  11/00	431	ʴΤ̤֡¾	Sludge handling device (others)
B23Q  11/00  L	0	1	3C011	B23Q  11/00	451	ùʴΡ̲ù	Sludge removed from the machined part (during machining)
B23Q  11/00  M	0	2	3C011	B23Q  11/00	1632	ˤ۰ʮФˤΡ̱ʻѤξ硤ΤɬǤΤȤϣ̡	Suction or jet by air (L if liquid is also an essential element when liquid is also used)
B23Q  11/00  N	0	1	3C011	B23Q  11/00	1010	ùʳʴ	Sludge removed from other than the machined part
B23Q  11/00  P	0	2	3C011	B23Q  11/00	820	ˤ۰ʮФˤΡ̱ʻѤξ硤ΤɬǤΤȤϣΡ	Suction or jet by air (N if liquid is also an essential element when liquid is also used)
B23Q  11/00  Q	0	1	3C011	B23Q  11/00	562	ʴơݥ֥롤٥ĥɤӽ	Sludge receiver; discharged from the table or bed
B23Q  11/00  R	0	1	3C011	B23Q  11/00	756	ʴ	Sludge conveyer
B23Q  11/00  S	0	2	3C011	B23Q  11/00	248	٥ȥ٥ˤ	Feed by a belt conveyer
B23Q  11/00  T	0	1	3C011	B23Q  11/00	285	ʴ	Sludge cutting
B23Q  11/00  U	0	1	3C011	B23Q  11/00	1782	ںդȤʬΥʤȤʬΥޤ	Separation from the cutting liquid (including separation from the product)
B23Q  11/00  Z	0	0	3C011	B23Q  11/00	673	¾	Others
B23Q  11/02  \	1	1	3C011	B23Q  11/02	132	߷åںں	Devices for removing scrap from the cutting teeth of circular cutters
B23Q  11/04  \	1	1	3C011	B23Q  11/04	62	βɻ֡㡥	Arrangements preventing overload of tools, e.g. restricting load
B23Q  11/06  \	1	1	3C011	B23Q  11/06	318	߷åΰ	Safety devices for circular cutters
B23Q  11/08  \	1	1	3C011	B23Q  11/08	9	ʬΤݸСϤͤ褱	Protective coverings for parts of machine tools; Splash guards
B23Q  11/08  A	1	0	3C011	B23Q  11/08	407	ƥ쥹ԥĥΤΡ̣äͥ	Telescopic type (C takes precedence.)
B23Q  11/08  B	1	0	3C011	B23Q  11/08	409	ư̤ݸΤΤΡ̣ͥ	for slide surface protection (A takes precedence.)
B23Q  11/08  C	1	0	3C011	B23Q  11/08	192	ݥ	Scraper
B23Q  11/08  D	1	0	3C011	B23Q  11/08	75	ͤͤݸΤΤΡ̣ͥ	for feed bar (feed screw, etc.) protection (A takes precedence.)
B23Q  11/08  E	1	0	3C011	B23Q  11/08	199	񥫥Сݡ̣ͥ	Tool cover (A takes precedence.)
B23Q  11/08  F	1	1	3C011	B23Q  11/08	153	ɥι񥫥С	Drill tool cover
B23Q  11/08  Z	1	0	3C011	B23Q  11/08	1845	¾	Others
B23Q  11/10  \	1	1	3C011	B23Q  11/10	15	ޤϹʪѤޤϽΤ֡Σ	Arrangements for cooling or lubricating tools or work
B23Q  11/10  A	1	0	3C011	B23Q  11/10	1086	ʬںĽ	Supply part (cutting position)
B23Q  11/10  B	1	1	3C011	B23Q  11/10	233	ΥѤĴ	Nozzle angle adjusting mechanism
B23Q  11/10  C	1	1	3C011	B23Q  11/10	56	ĥײؤε	Oil supply to the hole to be tapped
B23Q  11/10  D	1	1	3C011	B23Q  11/10	881	򴹤빩ۥ𤷤Ƥε	Oil supply via a replaceable tool holder
B23Q  11/10  E	1	0	3C011	B23Q  11/10	1297	ںդФ۴ʬ	Cutting liquid feeding or circulating part
B23Q  11/10  F	1	0	3C011	B23Q  11/10	646	ںդˤʤ	Cooling not by the cutting liquid
B23Q  11/10  Z	1	0	3C011	B23Q  11/10	737	¾ںդ˴Ϣʤ΢ơ	Others (not related to the cutting liquid R F)
B23Q  11/12  \	1	1	3C011	B23Q  11/12	17	ʤѤޤϽꤹ뤿֡ʣ£ѣͥˡΣ	Arrangements for cooling or lubricating parts of the machine (B23Q 11/14 takes precedence) [1,8]
B23Q  11/12  A	1	0	3C011	B23Q  11/12	398		Cooling device
B23Q  11/12  B	1	1	3C011	B23Q  11/12	81	ҡݥȥѥפѤ	using a heat pipe
B23Q  11/12  C	1	1	3C011	B23Q  11/12	744	缴Ƭϲž缴	Spindle head or rotary spindle cooling
B23Q  11/12  D	1	1	3C011	B23Q  11/12	76	꼴	Feed shaft cooling
B23Q  11/12  E	1	0	3C011	B23Q  11/12	816		Lubrication device
B23Q  11/12  Z	1	0	3C011	B23Q  11/12	69	¾	Others
B23Q  11/14  \	1	1	3C011	B23Q  11/14	504	ʬ겹٤˰ݻ뤿ˡޤ֡Σ	Methods or arrangements for maintaining a constant temperature in parts of machine tools [1,8]
B23Q  13/00  \	0	0	3C011	B23Q  13/00	166	ư˹˻Ѥ뤿֡㡥ݴɤΤݸ	Equipment for use with tools or cutters when not in operation, e.g. protectors for storage
B23Q  15/00  \	0	0	3C001	B23Q  15/00	30	ޤϹʪ걿ưں®٤ޤϰ֤μưޤĴΣ	Automatic control or regulation of feed movement, cutting velocity or position of tool or work [3]
B23Q  15/00  A	0	0	3C001	B23Q  15/00	773	αž	Machine tool operation control
B23Q  15/00  B	0	0	3C001	B23Q  15/00	497	ץĥ	Programme check
B23Q  15/00  C	0	0	3C001	B23Q  15/00	503	ꡤưַ	Feed, drive, or alignment control
B23Q  15/00  D	0	0	3C001	B23Q  15/00	199	ùǸư	Operation restoration after machining interruption
B23Q  15/00  F	0	0	3C001	B23Q  15/00	101	ʣۼù	Multiple different types of machining
B23Q  15/00  G	0	0	3C001	B23Q  15/00	216	ѵ	Control component
B23Q  15/00  H	0	0	3C001	B23Q  15/00	167	¿Ʊ̥ѥ륹ʬۤʤɡ	Multi-axial simultaneous control (pulse distribution, etc.)
B23Q  15/00  J	0	1	3C001	B23Q  15/00	335	Ʊž	Synchronised operation
B23Q  15/00  K	0	1	3C001	B23Q  15/00	94		Interpolation
B23Q  15/00  L	0	0	3C001	B23Q  15/00	219	ˤù	Machining by numerical control
B23Q  15/00  Z	0	0	3C001	B23Q  15/00	421	¾̼ư	Others (automatic control)
B23Q  15/00 301 \	1	1	3C001	B23Q  15/00	4	ùѼưץߥ󥰰	Automatic programming for machining in general
B23Q  15/00 301 A	1	0	3C001	B23Q  15/00	264	÷ϤˤãңɽƤħ	characterized by CRT display in interactive input
B23Q  15/00 301 B	1	0	3C001	B23Q  15/00	160	ͳ̡̤	Generation of the free curved surface or three-dimensional curved surface
B23Q  15/00 301 C	1	0	3C001	B23Q  15/00	160	μѡˤץ	Programme creation by knowledge accumulation and inference
B23Q  15/00 301 D	1	0	3C001	B23Q  15/00	72	ùˤץ	Programme creation by integration of machining elements
B23Q  15/00 301 E	1	0	3C001	B23Q  15/00	211		Tool selection
B23Q  15/00 301 F	1	0	3C001	B23Q  15/00	122	ùη	Decision of the machining sequence
B23Q  15/00 301 G	1	1	3C001	B23Q  15/00	72	θ	Tool sequence considered
B23Q  15/00 301 H	1	0	3C001	B23Q  15/00	405	ùη	Decision of the machining condition
B23Q  15/00 301 J	1	0	3C001	B23Q  15/00	434	ϩη	Decision of the tool route
B23Q  15/00 301 K	1	1	3C001	B23Q  15/00	268	θ	Tool shape considered
B23Q  15/00 301 L	1	1	3C001	B23Q  15/00	57	ùκ̺ǽسԷΤϡ	Creation of cyclic machining (final contour shape only entered)
B23Q  15/00 301 M	1	0	3C001	B23Q  15/00	229	ΰꡤʬ䡤ù	Area setting, splitting, or machining
B23Q  15/00 301 Z	1	0	3C001	B23Q  15/00	209	¾	Others
B23Q  15/00 303 \	2	2	3C001	B23Q  15/00	3	ùѼưץߥ	Automatic programming for particular machining
B23Q  15/00 303 A	2	0	3C001	B23Q  15/00	62	ͼפƱù	Simultaneous machining on the four-axial lathe
B23Q  15/00 303 B	2	0	3C001	B23Q  15/00	122	ùѥץ	Creation of the boring programme
B23Q  15/00 303 C	2	0	3C001	B23Q  15/00	44	Ӳùѥץ	Creation of the rough machining
B23Q  15/00 303 Z	2	0	3C001	B23Q  15/00	330	¾	Others
B23Q  15/00 305 \	1	1	3C001	B23Q  15/00	1	ץǡݥϡλħʥǡݥžư	characterized by the programme data input or creation method (data transfer, voice, manual)
B23Q  15/00 305 A	1	0	3C001	B23Q  15/00	27	ɣåݥˤ	Input by the IC card, etc.
B23Q  15/00 305 B	1	0	3C001	B23Q  15/00	116	ƥݥ󥰤ˤǡݥ̥ץ쥤Хĥ	Data creation by teaching (playback)
B23Q  15/00 305 C	1	0	3C001	B23Q  15/00	237	襤ˤǡݥ̡̿ǥ롤ʪѥݥǧʤɡ	Data creation by profiling (drawing, model, actual product, pattern recognition, etc.)
B23Q  15/00 305 Z	1	0	3C001	B23Q  15/00	290	¾	Others
B23Q  15/00 307 \	1	1	3C001	B23Q  15/00	5	ץǡݥѹ	Programme data correction or change
B23Q  15/00 307 A	1	0	3C001	B23Q  15/00	164	ѹˤǡݥ̸򴹻ʤɡ	Data correction by the tool being used (upon replacement, etc.)
B23Q  15/00 307 Z	1	0	3C001	B23Q  15/00	320	¾	Others
B23Q  15/00 309 \	1	1	3C001	B23Q  15/00	1	碌	Origin alignment
B23Q  15/00 309 A	1	0	3C001	B23Q  15/00	261	ν	Origin setting process
B23Q  15/00 309 B	1	0	3C001	B23Q  15/00	118	ַᡤưħ	characterized by origin alignment or return to origin motion
B23Q  15/00 309 C	1	0	3C001	B23Q  15/00	35	Τ	Deviation correction upon return to origin
B23Q  15/00 309 Z	1	0	3C001	B23Q  15/00	53	¾	Others
B23Q  15/007  \	1	1	3C001	B23Q  15/007	148	񤬹ʪ˺ѤƤ֤˹ԤΡΣ	while the tool acts upon the workpiece [3]
B23Q  15/013  \	2	2	3C001	B23Q  15/013	1125	걿ưޤĴʣ£ѣͥˡΣ	Control or regulation of feed movement (B23Q 15/12 takes precedence) [3]
B23Q  15/02  \	3	3	3C001	B23Q  15/02	183	ùιʪνִŪˡ׵ˡˤΡʣ£ѣͥˡΣ	according to the instantaneous size and the required size of the workpiece acted upon (B23Q 15/06 takes precedence) [3]
B23Q  15/04  \	3	3	3C001	B23Q  15/04	177	˲ù줿ʪκǽˡˤΡΣ	according to the final size of the previously machined workpiece (B23Q 15/06 takes precedence) [3]
B23Q  15/06  \	3	3	3C001	B23Q  15/06	7	ۤʤä¬긶Ѥ룲ʾ¬ˡ㡥ŪӵŪξ¬ꡤˤä줿¬̤ˤΡΣ	according to measuring results produced by two or more gauging methods using different measuring principles, e.g. by both optical and mechanical gauging [3]
B23Q  15/08  \	2	2	3C001	B23Q  15/08	203	ں®٤ޤĴʣ£ѣͥˡΣ	Control or regulation of cutting velocity (B23Q 15/12 takes precedence) [3]
B23Q  15/10  \	3	3	3C001	B23Q  15/10	93	ȹʪδ֤ں®٤ݻΡΣ	to maintain constant cutting velocity between tool and workpiece [3]
B23Q  15/12  \	2	2	3C001	B23Q  15/12	249	Ŭ桤ʤͽꤵ줿ȽǴˤäƺŬưԤ褦˼Ĵ᤹ΡΣ	Adaptive control, i.e. adjusting itself to have a performance which is optimum according to a preassigned criterion [3]
B23Q  15/12  A	2	0	3C001	B23Q  15/12	439	ӤӤ꿶ư˴ؤ	Control related to chatter vibration
B23Q  15/12  Z	2	0	3C001	B23Q  15/12	648	¾	Others
B23Q  15/14  \	2	2	3C001	B23Q  15/14	122	ʪ˴ؤƤιŤޤĴΣ	Control or regulation of the orientation of the tool with respect to the work [3]
B23Q  15/14  A	2	0	3C001	B23Q  15/14	193	ĥץߥ͡ݥ	Gap eliminator
B23Q  15/14  Z	2	0	3C001	B23Q  15/14	83	¾	Others
B23Q  15/16  \	2	2	3C001	B23Q  15/16	103	פΣ	Compensation for wear of the tool [3]
B23Q  15/18  \	2	2	3C001	B23Q  15/18	903	٤ޤϤˤ빩ѷΣ	Compensation of tool-deflection due to temperature or force [3]
B23Q  15/20  \	1	1	3C001	B23Q  15/20	161	񤬹ʪ˺ѤƤ˹ԤΡΣ	before or after the tool acts upon the workpiece [3]
B23Q  15/22  \	2	2	3C001	B23Q  15/22	854	ޤϹʪΰ֤ޤĴΣ	Control or regulation of position of tool or workpiece [3]
B23Q  15/24  \	3	3	3C001	B23Q  15/24	590	ľŪ֤ˤĤƤΤΡΣ	of linear position [3]
B23Q  15/26  \	3	3	3C001	B23Q  15/26	228	Ū֤ˤĤƤΤΡΣ	of angular position [3]
B23Q  15/28  \	2	2	3C001	B23Q  15/28	65	פͭΡΣ	with compensation for tool wear [3]
B23Q  16/00  \	0	0	3C028	B23Q  16/00	0	¾ʬवʤޤϹʪΰ֤Τ˰ַ᤹֡ʹޤϹʪΰ֤μưޤĴ£ѣޤϹʪθ֤ޤϽ˾֤ؼޤ¬ꤹ֣£ѣˡΣ	Equipment for precise positioning of tool or work into particular locations not otherwise provided for (automatic control or regulation of position of tool or work B23Q 15/22; arrangements for indicating or measuring existing or desired position of tool or work B23Q 17/22) [4]
B23Q  16/00  A	0	0	3C028	B23Q  16/00	126	ڤ	Scale marking device
B23Q  16/00  B	0	0	3C028	B23Q  16/00	2	ڤɽ	Scale marking (indication)
B23Q  16/00  Z	0	0	3C028	B23Q  16/00	392	¾̣ݣȡ	Others (Refer to 15/22 to 26.)
B23Q  16/02  \	1	1	3C028	B23Q  16/02	0	Ф֡ʻפäŬѤΣ£ƣˡΣ	Indexing equipment (specially adapted for gear-cutting machines B23F 23/08) [4]
B23Q  16/02  A	1	0	3C028	B23Q  16/02	236	Ф	Indexing control
B23Q  16/02  B	1	1	3C028	B23Q  16/02	102	Ф®㡥˾ס	Indexing speed control, e.g. buffer
B23Q  16/02  H	1	1	3C028	B23Q  16/02	30		Shortcut control
B23Q  16/02  C	1	0	3C028	B23Q  16/02	106	Ф֤ɽ	Indexing position indication or detection
B23Q  16/02  D	1	0	3C028	B23Q  16/02	122	Фγǧ	Indexing check
B23Q  16/02  E	1	0	3C028	B23Q  16/02	168	Ѥ	using a cam
B23Q  16/02  F	1	0	3C028	B23Q  16/02	75	ͥеѤ	using a Geneva mechanism
B23Q  16/02  J	1	0	3C028	B23Q  16/02	62	ľư㡥ԥȥ󡤥ͤѤ	using a direct action mechanism, e.g. piston, cylinder mechanism
B23Q  16/02  G	1	0	3C028	B23Q  16/02	100	ù缴γФ	Machining spindle indexing control
B23Q  16/02  Z	1	0	3C028	B23Q  16/02	380	¾ľФ	Others (linear indexing R 16/04)
B23Q  16/04  \	2	2	3C028	B23Q  16/04	174	вưʬФ֤˥å뤿ࡤ㡥ޡͭΡΣ	having intermediate members, e.g. pawls, for locking the relatively movable parts in the indexed position [4]
B23Q  16/06  \	3	3	3C028	B23Q  16/06	1	žФΣ	Rotary indexing [4]
B23Q  16/06  A	3	0	3C028	B23Q  16/06	151	ĥȵѤ	using a ratchet mechanism
B23Q  16/06  B	3	0	3C028	B23Q  16/06	374	ԥΡѤΤΡ㡥ޤ	Pin insertion (including the similar action, e.g. teeth)
B23Q  16/06  D	3	1	3C028	B23Q  16/06	70	ԥϥԥιħΡȹ礤ޤ	characterized by the configuration of the pin or pin receiver (including fit control)
B23Q  16/06  E	3	1	3C028	B23Q  16/06	36	ԥζưħ	characterized by the pin drive
B23Q  16/06  C	3	0	3C028	B23Q  16/06	113	ȥĥѤѤ	using a stopper
B23Q  16/06  Z	3	0	3C028	B23Q  16/06	72	¾	Others
B23Q  16/08  \	2	2	3C028	B23Q  16/08	17	вưʤФ֤ߤ˥פʤͭΡΣ	having means for clamping the relatively movable parts together in the indexed position [4]
B23Q  16/10  \	3	3	3C028	B23Q  16/10	0	žФΣ	Rotary indexing [4]
B23Q  16/10  A	3	0	3C028	B23Q  16/10	330	Υ	Contact/separation type
B23Q  16/10  B	3	1	3C028	B23Q  16/10	76	¿ŷ㡥Ⱦ¿	Multiplex type, e.g. multiple rows in radial direction
B23Q  16/10  C	3	0	3C028	B23Q  16/10	50	ܡݥݥˤ	using a ball or roller
B23Q  16/10  D	3	1	3C028	B23Q  16/10	5	¿ŷ	Multiplex type
B23Q  16/10  Z	3	0	3C028	B23Q  16/10	51	¾	Others
B23Q  16/12  \	2	2	3C028	B23Q  16/12	16	طϤѤΡΣ	using optics [4]
B23Q  17/00  \	0	0	3C029	B23Q  17/00	20	ˤƻؼޤ¬ꤹ֤֡ưں®٤ޤϹޤϹʪΰ֤μưޤĴ£ѣˡΣ	Arrangements for indicating or measuring on machine tools (for automatic control or regulation of feed movement, cutting velocity or position of tool or work B23Q 15/00) [3,4]
B23Q  17/00  A	0	0	3C029	B23Q  17/00	1974		Detection device
B23Q  17/00  B	0	1	3C029	B23Q  17/00	758	ʪ̵ͭγǧʪϹΥ׳ǧ̥ĥ⢪££¡	Work presence/absence check; work or tool clamping check (in the chuck R B 23 B 31/02 B)
B23Q  17/00  C	0	1	3C029	B23Q  17/00	323	ġݥץꥻĥȡ̹ǹԤΡ	Tool presetting (outside the machine tool)
B23Q  17/00  D	0	0	3C029	B23Q  17/00	900	ɽ	Indication device
B23Q  17/00  E	0	1	3C029	B23Q  17/00	598	ϤΤ	Control system
B23Q  17/00  F	0	0	3C029	B23Q  17/00	646	񡤹ʪμ̡̹ȵΤȤδ֤οޤ	Tool or work identification (including signal passing between the tool and machine main unit)
B23Q  17/00  G	0	0	3C029	B23Q  17/00	52	׿	Counting
B23Q  17/00  H	0	0	3C029	B23Q  17/00	75	ˤХ󥹼¬ꤷġùΡ¬Τߢǣ͡ˡ	Balancing by removing a part of the work (machining during measurement (measurement only R G 01 M))
B23Q  17/00  Z	0	0	3C029	B23Q  17/00	224	¾	Others
B23Q  17/09  \	1	1	3C029	B23Q  17/09	6	ںﰵޤں﹩֡㡥ںǽϡ١ؼޤ¬ꤹΡʹβ٤ɻߤ֣£ѣΥɥ»ؼ֣££ˡΣ	for indicating or measuring cutting pressure or cutting-tool condition, e.g. cutting ability, load on tool (arrangements preventing overload of tools B23Q 11/04; devices for indicating failure of drills during boring B23B 49/00) [4]
B23Q  17/09  A	1	0	3C029	B23Q  17/09	853	ù֤θ	Machining state detection
B23Q  17/09  B	1	0	3C029	B23Q  17/09	448	μ̿ѻƹԤΡ	Tool life management (integration)
B23Q  17/09  C	1	0	3C029	B23Q  17/09	709	»θС㡥ܿˤ븡С	Tool damage detection, e.g. detection by contacting
B23Q  17/09  D	1	1	3C029	B23Q  17/09	225	ưݥϤˤ	using the drive motor power
B23Q  17/09  E	1	1	3C029	B23Q  17/09	165	ںϤˤ	using the cutting force
B23Q  17/09  F	1	1	3C029	B23Q  17/09	233	ưˤ	using vibration
B23Q  17/09  G	1	1	3C029	B23Q  17/09	291	ſˤ	using the AE signal
B23Q  17/09  H	1	0	3C029	B23Q  17/09	488	ںϡϤθ	Cutting force or pressing force detection
B23Q  17/09  Z	1	0	3C029	B23Q  17/09	162	¾	Others
B23Q  17/10  \	1	1	3C029	B23Q  17/10	128	ں®٤ޤϲžؼޤ¬ꤹ	for indicating or measuring cutting speed or number of revolutions
B23Q  17/12  \	1	1	3C029	B23Q  17/12	419	ưؼޤ¬ꤹ	for indicating or measuring vibration
B23Q  17/20  \	1	1	3C029	B23Q  17/20	21	ʪħ㡥سԡˡ١ؼޤ¬ꤹΡΣ	for indicating or measuring workpiece characteristics, e.g. contour, dimension, hardness [4]
B23Q  17/20  A	1	0	3C029	B23Q  17/20	1163	ʪˡ¬	Work dimension measurement
B23Q  17/20  B	1	1	3C029	B23Q  17/20	110	סǮѷ̤¬ΤΤ	for measurement of the tool wear or thermal deformation volume
B23Q  17/20  Z	1	0	3C029	B23Q  17/20	409	¾	Others
B23Q  17/22  \	1	1	3C029	B23Q  17/22	7	ޤϹʪθ֤߰ޤϽ˾֤ؼޤ¬ꤹΡΣ	for indicating or measuring existing or desired position of tool or work [4]
B23Q  17/22  A	1	0	3C029	B23Q  17/22	823	ʪΰ֤ľ¬㡥ĽФΤ	Direct measurement of the work position, e.g. for centring
B23Q  17/22  B	1	1	3C029	B23Q  17/22	546	ΤΥ󥵡̥󥵰̡ǣ¡	Sensor therefor (sensors in general G 01 B)
B23Q  17/22  C	1	0	3C029	B23Q  17/22	366	ʪȹܿ	Detection of contact between the work and tool
B23Q  17/22  D	1	0	3C029	B23Q  17/22	800	ǹˡ¬	Measurement of the tool dimension on the machine tool
B23Q  17/22  E	1	0	3C029	B23Q  17/22	219	ľưΥ˥ݥˤ֤θ	Detection of the position of linearly moving member with the linear scale
B23Q  17/22  F	1	0	3C029	B23Q  17/22	179	ľưβž̸дˤ֤θ	Detection of the position of linearly moving member by the rotation volume detector
B23Q  17/22  Z	1	0	3C029	B23Q  17/22	515	¾	Others
B23Q  17/24  \	1	1	3C029	B23Q  17/24	15	طϤѤΡΣ	using optics [4]
B23Q  17/24  A	1	0	3C029	B23Q  17/24	254	ù֤θ	Machining state detection
B23Q  17/24  B	1	0	3C029	B23Q  17/24	630	ޤϹʪθ֤߰λؼ¬	Indication or measurement of the current position of the tool or work
B23Q  17/24  C	1	1	3C029	B23Q  17/24	565	ʪΰ֤ľ¬	Direct measurement of the work position
B23Q  17/24  D	1	1	3C029	B23Q  17/24	167	ʪȹɽ	Displaying the images of the work and tool
B23Q  17/24  Z	1	0	3C029	B23Q  17/24	925	¾	Others
B23Q  23/00  \	0	0	3C029	B23Q  23/00	84	Ե§ޤס㡥ư̤ΤΡåƥ󥰵ΤΡ뤿֡ʼư£ѣˡΣ	Arrangements for compensating for irregularities or wear, e.g. of ways, of setting mechanisms (automatic control B23Q 15/00) [3]
B23Q  27/00  \	0	0	3C052	B23Q  27/00	5	¾Υ֥饹˵ꤵƤʤʪ¤뤿δŪ	Geometrical mechanisms for the production of work of particular shapes, not fully provided for in another subclass
B23Q  27/00  A	0	0	3C052	B23Q  27/00	57	ž󼡶	Rotary secondary curved surface
B23Q  27/00  K	0	1	3C052	B23Q  27/00	53		Spherical surface
B23Q  27/00  L	0	2	3C052	B23Q  27/00	38	ž̥ĥ׾ͤˤ	using a rotary tool (cup type, etc.)
B23Q  27/00  M	0	1	3C052	B23Q  27/00	46	߸̾سԤĤΡ̵̤	having an arc contour (excluding the spherical surface)
B23Q  27/00  N	0	1	3C052	B23Q  27/00	21	ʪ̡ж	Paraboloid, hyperboloid
B23Q  27/00  P	0	0	3C052	B23Q  27/00	35	߷	Non-circular cross section
B23Q  27/00  Q	0	1	3C052	B23Q  27/00	33	缴žܤǶư뵡ˤ	using a mechanism driven by a multiple of spindle revolutions
B23Q  27/00  B	0	1	3C052	B23Q  27/00	41	ʱ	Ellipse
B23Q  27/00  C	0	1	3C052	B23Q  27/00	53	¿ѷ	Polygon
B23Q  27/00  D	0	1	3C052	B23Q  27/00	98	ȥɶ	Trochoid
B23Q  27/00  E	0	0	3C052	B23Q  27/00	56		Mutually penetrating lines
B23Q  27/00  F	0	0	3C052	B23Q  27/00	21		Eddy shape
B23Q  27/00  G	0	0	3C052	B23Q  27/00	38		Spiral shape
B23Q  27/00  H	0	0	3C052	B23Q  27/00	32	̡	Cam surface, cam groove
B23Q  27/00  J	0	1	3C052	B23Q  27/00	32	Ѱ̤Ρ	Generation of axial displacement, oil groove
B23Q  27/00  Z	0	0	3C052	B23Q  27/00	109	¾	Others
B23Q  33/00  \	0	0	3C041	B23Q  33/00	13	襤ˡ	Methods for copying
B23Q  33/00  A	0	0	3C041	B23Q  33/00	78	޷ˤ®ѹ	Speed change on the corner or steep slope
B23Q  33/00  B	0	0	3C041	B23Q  33/00	23	ں٤Ѱˤ	making the cutting load even
B23Q  33/00  C	0	0	3C041	B23Q  33/00	21	®	Constant circumferential speed
B23Q  33/00  Z	0	0	3C041	B23Q  33/00	122	¾	Others
B23Q  35/00  \	0	0	3C041	B23Q  35/00	7	ѥޤϥޥǥ뤫ľ臘ޤ֡ư襤Τ	Control systems or devices for copying directly from a pattern or a master model; Devices for use in copying manually
B23Q  35/00  A	0	0	3C041	B23Q  35/00	101	襤	Self profiling
B23Q  35/00  Z	0	0	3C041	B23Q  35/00	166	¾	Others
B23Q  35/02  \	1	1	3C041	B23Q  35/02	69	ѥ󤫤θ̤襤㡥սΰַΤΤ	Copying discrete points from the pattern, e.g. for determining the position of holes to be drilled
B23Q  35/04  \	1	1	3C041	B23Q  35/04	6	ѥ󡤥ǥ롤ޤϿ̤γ˱äưưե顼ޤʪλѡ嵭ΤΥե顼ѥޤϥǥ	using a feeler or the like travelling along the outline of the pattern, model or drawing; Feelers, patterns, or models therefor
B23Q  35/04  A	1	0	3C041	B23Q  35/04	96	ܡѡ̤줾βùͤˤꡤ£˻ȡ	for welding or fusing (Refer to B 23 K according to each machining mode.)
B23Q  35/04  B	1	1	3C041	B23Q  35/04	162		for welding
B23Q  35/04  C	1	0	3C041	B23Q  35/04	15	ӤΤ	for the band saw machine
B23Q  35/04  D	1	0	3C041	B23Q  35/04	103	ڹե饤	for the wood machining milling machine
B23Q  35/04  E	1	0	3C041	B23Q  35/04	19	եݥݤȹΰĴ	Position adjustment of the feeler and tool
B23Q  35/04  Z	1	0	3C041	B23Q  35/04	74	¾	Others
B23Q  35/06  \	2	2	3C041	B23Q  35/06	11	³Ȥ椹뤿äղäΡ㡥ʪ̤θĽں	specially adapted for controlling successive operations, e.g. separate cuts, on a workpiece
B23Q  35/08  \	2	2	3C041	B23Q  35/08	1	ե顼ޤʪư򹩶ޤϹʪưѤ	Means for transforming movement of the feeler or the like into feed movement of tool or work
B23Q  35/10  \	3	3	3C041	B23Q  35/10	5	ŪˤΤ	mechanically only
B23Q  35/10  A	3	0	3C041	B23Q  35/10	160	ѥ󥿥յˤ	using a pantograph mechanism
B23Q  35/10  B	3	0	3C041	B23Q  35/10	333	襤ݥȹ񤬰ΤȤʤĤƤ	Profiling roller and tool unitised
B23Q  35/10  C	3	1	3C041	B23Q  35/10	214	Ϲʪžξˤ	Tool or work provided on the rotor
B23Q  35/10  D	3	1	3C041	B23Q  35/10	34	襤ݥȹƱˤ	Profiling roller and tool provided on the same axis
B23Q  35/10  E	3	2	3C041	B23Q  35/10	24	Ϲʪžξˤ	Tool or work provided on the rotor
B23Q  35/10  F	3	1	3C041	B23Q  35/10	8	襤ݥȹ񤬥Сݤξüˤ	Profiling roller and tool provided on both ends of the lever
B23Q  35/10  G	3	2	3C041	B23Q  35/10	2	Ϲʪžξˤ	Tool or work provided on the rotor
B23Q  35/10  Z	3	0	3C041	B23Q  35/10	39	¾	Others
B23Q  35/12  \	3	3	3C041	B23Q  35/12	341	ŵŪʤޤΡ襤ΤΥץ̤֤ǵϿΣǣǣ	involving electrical means (programme recording for copying purposes in a separate apparatus G05, G11)
B23Q  35/121  \	4	4	3C041	B23Q  35/121	28	ŪѤ	using mechanical sensing
B23Q  35/122  \	5	5	3C041	B23Q  35/122	6	ե顼ŵĤ	the feeler opening or closing electrical contacts
B23Q  35/123  \	5	5	3C041	B23Q  35/123	1	ե顼ŵϩΥԡ󥹤Ѳ	the feeler varying the impedance in a circuit
B23Q  35/124  \	6	6	3C041	B23Q  35/124	2	񹳤Ѳ	varying resistance
B23Q  35/125  \	6	6	3C041	B23Q  35/125	0	̤Ѳ	varying capacitance
B23Q  35/126  \	6	6	3C041	B23Q  35/126	0	󥹤Ѳ	varying inductance
B23Q  35/127  \	4	4	3C041	B23Q  35/127	63	󵡳ŪѤ	using non-mechanical sensing
B23Q  35/128  \	5	5	3C041	B23Q  35/128	25	Ūʤˤ봶	Sensing by using optical means
B23Q  35/128  A	5	0	3C041	B23Q  35/128	163	ü臘	Profiling of the line or end
B23Q  35/128  Z	5	0	3C041	B23Q  35/128	92	¾	Others
B23Q  35/129  \	5	5	3C041	B23Q  35/129	13	ŵŪżʤˤ봶	Sensing by means of electric discharges
B23Q  35/13  \	5	5	3C041	B23Q  35/13	11	Ѥʤˤ봶	Sensing by using magnetic means
B23Q  35/14  \	4	4	3C041	B23Q  35/14	2	դޤ¿ư	controlling one or more electromotors
B23Q  35/16  \	4	4	3C041	B23Q  35/16	1	ήΰ⡼	controlling fluid motors
B23Q  35/18  \	3	3	3C041	B23Q  35/18	182	ήμʤޤΡʣ£ѣͥ	involving fluid means (B23Q 35/16 takes precedence)
B23Q  35/20  \	3	3	3C041	B23Q  35/20	29	γ礤ѲüʼʤĤ	with special means for varying the ratio of reproduction
B23Q  35/22  \	3	3	3C041	B23Q  35/22	17	̤뤿äղä	specially adapted for compensating for wear of the tool
B23Q  35/24  \	2	2	3C041	B23Q  35/24	13	ե顼ե顼˥å	Feelers; Feeler units
B23Q  35/26  \	3	3	3C041	B23Q  35/26	181	ѥޤϥǥʪŪܿ	designed for physical contact with a pattern or a model
B23Q  35/28  \	4	4	3C041	B23Q  35/28	20	襤ΤΤ	for control of a mechanical copying system
B23Q  35/30  \	4	4	3C041	B23Q  35/30	123	ŵޤŵ襤ΤΤ	for control of an electrical or electro-hydraulic copying system
B23Q  35/32  \	5	5	3C041	B23Q  35/32	17	ե顼ŵĤΡ㡥֥åȥ졼Ĥ	in which the feeler makes and breaks an electrical contact or contacts, e.g. with brush-type tracers
B23Q  35/34  \	5	5	3C041	B23Q  35/34	38	ե顼ŵϩŵŪѲΡ㡥̡ȿ	in which the feeler varies an electrical characteristic in a circuit, e.g. capacity, frequency
B23Q  35/36  \	4	4	3C041	B23Q  35/36	8	ޤ϶襤ƥΤΤ	for control of a hydraulic or pneumatic copying system
B23Q  35/38  \	3	3	3C041	B23Q  35/38	13	ʪŪܿʳˤѥ󡤥ǥޤϿ̤δΤΤΤΡήΥå֤ˤ봶Σ£ѣ	designed for sensing the pattern, model, or drawing without physical contact (sensing by means of a fluid jet B23Q 35/36)
B23Q  35/40  \	4	4	3C041	B23Q  35/40	85	ŪޤϸŪޤ	involving optical or photoelectrical systems
B23Q  35/42  \	2	2	3C041	B23Q  35/42	91	ѥ󡨥ޥǥ	Patterns; Master models
B23Q  35/44  \	3	3	3C041	B23Q  35/44	39	̤ܿĴΤμʤΡ㡥ͤˤݻ줿Хɤ	provided with means for adjusting the contact face, e.g. comprising flexible bands held by set-screws
B23Q  35/46  \	3	3	3C041	B23Q  35/46	66	ѥޤϥޥǥλٻ	Supporting devices therefor
B23Q  35/48  \	1	1	3C041	B23Q  35/48	74	ѥ󡤥ǥޤϿ̤γξ¦򤢤˰ưե顼ޤʪλ	using a feeler or the like travelling to-and-fro between opposite parts of the outline of the pattern, model, or drawing
B23Q  37/00  \	0	0	3C042	B23Q  37/00	3	ΰۤäޤϤȹ礻ʬ뤳ȤǤ褦߷פ줿ʤȤ⤤ĤΥ˥åȤޤʣΥ˥åȤʤ°ùޤϤȹ礻ߴħפǤ嵭Υ˥åȡζ°ùȤ˴ؤħŬʥ֥饹㡥£У򻲾ȡ	Metal-working machines, or constructional combinations thereof, built-up from units designed so that at least some of the units can form parts of different machines or combinations; Units therefor in so far as the feature of interchangeability is important (features relating to particular metal-working operations, <u>see</u> the relevant subclasses, e.g. B23P 23/00)
B23Q  37/00  A	0	0	3C042	B23Q  37/00	74	˥ĥȤѴ	Unit conversion device
B23Q  37/00  Z	0	0	3C042	B23Q  37/00	281	¾	Others
B23Q  39/00  \	0	0	3C042	B23Q  39/00	54	ơ˶°ùԤǽϤΤʣΥ֥֥η礵줿°ùʣ£ѣ£УͥˡΣ	Metal-working machines incorporating a plurality of sub-assemblies, each capable of performing a metal-working operation (B23Q 33/00, B23P 23/00 take precedence) [2006.01]
B23Q  39/02  \	1	1	3C042	B23Q  39/02	74	ñκȥơˤƺȤԤǽϤͭ륵֥֥	the sub-assemblies being capable of being brought to act at a single operating station
B23Q  39/04  \	1	1	3C042	B23Q  39/04	2	ۤäơƱ˺ư뤿֤줿֥֥ꡤ㡥ưľΥơ֥ͭΡʹʪưʤˤΤܹ礵줿ȹ礻£ѣ	the sub-assemblies being arranged to operate simultaneously at different stations, e.g. with an annular work-table moved in steps (associations of machines connected only by work-transferring means B23Q 41/00)
B23Q  39/04  A	1	0	3C042	B23Q  39/04	247	ݥơݥ֥뷿	Rotary table type
B23Q  39/04  B	1	0	3C042	B23Q  39/04	346	ľưݥ׷	Direct action type or loop type
B23Q  39/04  C	1	1	3C042	B23Q  39/04	204	ʪ	Work feed device
B23Q  39/04  D	1	2	3C042	B23Q  39/04	61	ʪ	Shaft feed
B23Q  39/04  E	1	2	3C042	B23Q  39/04	235	ȥ󥹥եСݤˤ	using the transfer bar
B23Q  39/04  F	1	3	3C042	B23Q  39/04	165	ʪ岼ư	Vertical motion of the work
B23Q  39/04  G	1	1	3C042	B23Q  39/04	321	ѥĥȡʪΰַ	Pallet or work alignment
B23Q  39/04  H	1	1	3C042	B23Q  39/04	166	ȿž	Inversion device
B23Q  39/04  Z	1	0	3C042	B23Q  39/04	57	¾	Others
B23Q  41/00  \	0	0	3C042	B23Q  41/00	4	饹££ޤϣ£ˤη̤ŪȤʤ°ùȹ礻ʣ£ѣ£ѣͥ表ԤȤħϡ⤷ۤʤ°ùȤƱʤСκȤμΤΥ֥饹㡥ȴù£ġܣ£ˡ£¡򻲾ȡۤʤ°ùȤεŪȹ礻ħ£У	Combinations or associations of metal-working machines not directed to a particular result according to classes B21, B23, or B24 (B23Q 37/00, B23Q 39/00 take precedence; features relating to operations performed, if the different metal-working operations are of the same kind, <u>see</u> the subclass for the kind of operation, e.g. punching B21D, welding B23K, grinding B24B; features relating to technically specified combinations of different metal-working operations B23P 23/00)
B23Q  41/00  A	0	0	3C042	B23Q  41/00	534	ʪѥĥȤμ	Work or pallet identification
B23Q  41/00  B	0	1	3C042	B23Q  41/00	145	̤ȼ	Process accompanying identification
B23Q  41/00  C	0	0	3C042	B23Q  41/00	214	ù饤ιʪμ谷㡥ѥĥȥסݥ롤ѥĥȤؤΥݥա	Work handling before the machining line, e.g. pallet pool, work setting on the pallet
B23Q  41/00  E	0	0	3C042	B23Q  41/00	137	ʳ	Other than the machine tool
B23Q  41/00  F	0	0	3C042	B23Q  41/00	208	μ谷㡥	Tool handling, e.g. tool management
B23Q  41/00  G	0	0	3C042	B23Q  41/00	279	ǡݥ	Data transmission
B23Q  41/00  Z	0	0	3C042	B23Q  41/00	373	¾	Others
B23Q  41/02  \	1	1	3C042	B23Q  41/02	3	֤ιʪư˴ؤħ¤饤Ȥ߹ޤ줿ιʪμ谷֣£ѣ	Features relating to transfer of work between machines (arrangements for handling work for machine tools co-ordinated in production lines B23Q 7/14)
B23Q  41/02  A	1	0	3C042	B23Q  41/02	726		Feed device
B23Q  41/02  Z	1	0	3C042	B23Q  41/02	568	¾	Others
B23Q  41/04  \	1	1	3C042	B23Q  41/04	161	δطŪ֤˴ؤħ	Features relating to relative arrangements of machines
B23Q  41/06  \	1	1	3C042	B23Q  41/06	45	κȹ˴ؤħ	Features relating to organisation of working of machines
B23Q  41/08  \	1	1	3C042	B23Q  41/08	204	ǽΨŪȤΰݻ˴ؤħ	Features relating to maintenance of efficient operation
B23Q  41/08  A	1	0	3C042	B23Q  41/08	764	ݥ	Preparation of the production schedule
B23Q  41/08  B	1	0	3C042	B23Q  41/08	734	Դ	Operation management
B23Q  41/08  Z	1	0	3C042	B23Q  41/08	1172	¾	Others
