B24B   1/00  \	0	0	3C049	B24B   1/00	38	ˡޤϸˡˡȴϢŤ줿֤λѡΣ	Processes of grinding or polishing; Use of auxiliary equipment in connection with such processes [2006.01]
B24B   1/00  A	0	0	3C049	B24B   1/00	582	ȾƳΤθˡŵŪ˴ؤ΢ȣ̣	Semiconductor grinding or polishing method (related to electrical characteristics R H 01 L 21/304)
B24B   1/00  B	0	0	3C049	B24B   1/00	225	뾽Τθˡ̸֡ʤʤʿ̡ü̡̼̤Ǥ뤫ʤŸΤΤ㡥££С££饹££ÿ徽ưҡȾƳΤϴޤʤ	Crystal polishing method or device (irrelevant to the polishing means and irrelevant to the plane, end surface diagonal plane, and curved surface, however, excluding those having sub-categories, e.g. jewel B 24 B 9/16, stylus B 24 B 19/16 A, crystal oscillator B 24 B 1/00 C, semiconductor not included)
B24B   1/00  C	0	0	3C049	B24B   1/00	73	徽ưҤθˡ̣֡££Żȡ	Crystal oscillator polishing method or device (Refer to B 24 B 13/00 E.)
B24B   1/00  D	0	0	3C049	B24B   1/00	284	ϿΡǥĤθˡ	Magnetic recording medium or disk board polishing method
B24B   1/00  E	0	0	3C049	B24B   1/00	101	٤椹뤳Ȥħ	characterized by temperature control
B24B   1/00  F	0	0	3C049	B24B   1/00	230	󥹤ħ	characterized by the sequence
B24B   1/00  Z	0	0	3C049	B24B   1/00	590	¾㡥¾βùȤʣùˡ¾ʬ㡥£ȣˤΤʤΡ	Others, e.g. composite machining method with another machining and not categorized into the others, e.g. B 23 H 5/00
B24B   1/04  \	1	1	3C049	B24B   1/04	18	ޤϸṩ񡤸ΤޤϹʪ˿ưԤ碌Ρ㡥Ķȿưˤ븦ưޤϿưƴ££ʪɽ̤Ķž夲㡥⤤ưǱư븦ΤˤΣ££ޤˡΣ	subjecting the grinding or polishing tools, the abrading or polishing medium or work to vibration, e.g. grinding with ultrasonic frequency (involving oscillating or vibrating containers B24B0031060000;superfinishing surfaces on work, e.g. by means of abrading blocks reciprocating with high frequency B24B0035000000)[2006.01]
B24B   1/04  A	1	0	3C049	B24B   1/04	219	Ķȥĥԥ	Ultrasonic lapping
B24B   1/04  B	1	0	3C049	B24B   1/04	436	Ϳ뿶ưĶȿưǤ	Ultrasonic vibration as the vibration given to the tool
B24B   1/04  C	1	1	3C049	B24B   1/04	280	Ķȿưɽ̤ˡͿ	Ultrasonic vibration given in the normal line direction of the polished surface
B24B   1/04  D	1	0	3C049	B24B   1/04	203	Ϳ뿶ưĶȿưʳǤ	Other than ultrasonic vibration as the vibration given to the tool
B24B   1/04  E	1	1	3C049	B24B   1/04	56	ưɽ̤ˡͿ	Vibration given in the normal line direction of the polished surface
B24B   1/04  Z	1	0	3C049	B24B   1/04	519	¾̸ޤϸʳϡ££ȡ	Others (Refer to B 23 B 1/00 for other than grinding or polishing.)
B24B   3/00  \	0	0	3C158	B24B   3/00	3	֤㡥ΡΤ°֡㡥ݻ֡⤷ϤΤΡΤѤʤ֤ģʪͭ뵡ιʬȤ߷פƤ֤֤ϤεδϢս򻲾ȡ㡥ģ£ģ	Sharpening cutting edges, e.g. of tools; Accessories therefor, e.g. for holding the tools (non-abrasive sharpening devices for scythes, sickles, or the like A01D 3/00; sharpening devices designed as components of machines with cutters, <u>see</u> the relevant places for the machines, e.g. A01D 75/08, B26D 7/12)
B24B   3/00  A	0	0	3C158	B24B   3/00	49	ܡݥ륨ɥߥ롨ҥɥο֤	Ball end mill; R drill blade grinding
B24B   3/00  Z	0	0	3C158	B24B   3/00	90	¾	Others
B24B   3/02  \	1	1	3C158	B24B   3/02	97	ե饤åο֤	of milling cutters
B24B   3/04  \	2	2	3C158	B24B   3/04	11	ʿե饤åο֤	of plain milling cutters
B24B   3/06  \	2	2	3C158	B24B   3/06	3	̤ޤե饤åޤϥåإåɡ㡥󥯷Τ	of face or end milling cutters or cutter heads, e.g. of shank type
B24B   3/06  A	2	0	3C158	B24B   3/06	95	ɥߥο֤	End mill blade grinding
B24B   3/06  Z	2	0	3C158	B24B   3/06	62	¾	Others
B24B   3/08  \	2	2	3C158	B24B   3/08	23	ե饤åο֤㡥ķ	of profile milling cutters, e.g. of disc type
B24B   3/10  \	2	2	3C158	B24B   3/10	21	롼ޤĦѥåο֤	of routers or engraving needles
B24B   3/12  \	2	2	3C158	B24B   3/12	62	ۥ֤ο֤	of hobs
B24B   3/14  \	2	2	3C158	B24B   3/14	1	ۤѺں﹩ο֤	of mortise chain cutters
B24B   3/16  \	1	1	3C158	B24B   3/16	33	֥ο֤	of broaches
B24B   3/18  \	1	1	3C158	B24B   3/18	51	åפޤϥ꡼ޡο֤	of taps or reamers
B24B   3/20  \	2	2	3C158	B24B   3/20	5	åפޤϥ꡼ޡΥơѡޤϤζĤ̼	Tapering or chamfering taps or reamers
B24B   3/22  \	2	2	3C158	B24B   3/22	4	åפޤϥ꡼ޡּ	Relief cutting of taps or reamers
B24B   3/24  \	1	1	3C158	B24B   3/24	157	ɥο֤ʥ󥯤ιڤ££	of drills (by fluting the shank B24B 19/04)
B24B   3/26  \	2	2	3C158	B24B   3/26	226	ɥüο֤	of the point of twist drills
B24B   3/28  \	3	3	3C158	B24B   3/28	31	ɥ뼴ФƷƤ뼴μ˥ɥ󤹤뤳ȤˤԤ֤	by swivelling the drill around an axis angularly to the drill axis
B24B   3/30  \	4	4	3C158	B24B   3/30	4	嵭ˡȶ˥ɥ򤽤켫Ȥμμ˲žƹԤ֤	and rotating the drill about its own axis
B24B   3/32  \	3	3	3C158	B24B   3/32	33	˥	for thinning the point
B24B   3/33  \	2	2	3C158	B24B   3/33	9	кѥɥο֤	of drills for stone
B24B   3/34  \	1	1	3C158	B24B   3/34	281	﹩ޤʿ﹩⤷Ϲϡ㡥ڥåο֤ʣ££ͥ	of turning or planing tools or tool bits, e.g. gear cutters (B24B 3/36 takes precedence)
B24B   3/36  \	1	1	3C158	B24B   3/36	2	ǿϤο֤ʣ££ͥ	of cutting blades (B24B 3/58 takes precedence)
B24B   3/36  A	1	0	3C158	B24B   3/36	140	ʿФˤ	using a flat grindstone
B24B   3/36  C	1	0	3C158	B24B   3/36	86	žФˤΡ̱߼̡ṳ̈ξѤΡ߿̤Ѥ	using a rotary grindstone (using both circumferential surface and end surface, using the conical surface, etc.)
B24B   3/36  D	1	1	3C158	B24B   3/36	147	߼̤Ѥ	using the circumferential surface
B24B   3/36  E	1	1	3C158	B24B   3/36	336	ṳ̈Ѥ	using the end surface
B24B   3/36  F	1	1	3C158	B24B   3/36	101	ξֻ̣¤Ρ	Both axes type (forming a V type groove)
B24B   3/36  G	1	2	3C158	B24B   3/36	136	֤ˤΡưϸΤʤΡ	Manual grinding (no power source provided)
B24B   3/36  K	1	0	3C158	B24B   3/36	54	٥ȸˤ	Belt grinding
B24B   3/36  M	1	0	3C158	B24B   3/36	310	֤ˤΡ¾˼֤ŸΤΤϴޤޤʤ	Manual grinding (not including those having sub-categories of manual grinding)
B24B   3/36  N	1	1	3C158	B24B   3/36	126	ֻ·̣Ǥͥ	V groove type (G takes precedence.)
B24B   3/36  P	1	0	3C158	B24B   3/36	28	ӥʥդο֤	Band knife blade grinding
B24B   3/36  R	1	0	3C158	B24B   3/36	16	ߥȡݥʥդο֤	Microtome knife blade grinding
B24B   3/36  Z	1	0	3C158	B24B   3/36	105	¾	Others
B24B   3/38  \	2	2	3C158	B24B   3/38	381	ںʿںѥåϤο֤	for planing wood, e.g. cutter blades
B24B   3/40  \	2	2	3C158	B24B   3/40	33	Ϥζʱ֤äѤ֤ޤˡˤ	Processes or apparatus specially adapted for sharpening curved edges
B24B   3/42  \	2	2	3C158	B24B   3/42	12	˶ʤ줿ϡ㡥Ǵοϡο֤	helically bent, e.g. for lawn mowers
B24B   3/44  \	2	2	3C158	B24B   3/44	22	ο֤Σ	of scythes or sickles [2]
B24B   3/46  \	2	2	3C158	B24B   3/46	243	ķʪο֤	of disc blades
B24B   3/48  \	2	2	3C158	B24B   3/48	204	ߥޤϥߥοϤο֤ʵŪˤ餺ΤˤäƤ֤£ģ	of razor blades or razors (by an abrasive block without mechanisms B24D 15/06)
B24B   3/50  \	3	3	3C158	B24B   3/50	223	֤ˤ	operated manually
B24B   3/52  \	2	2	3C158	B24B   3/52	7	ǿϤޤο֤	of shear blades or scissors
B24B   3/52  A	2	0	3C158	B24B   3/52	190	˥ĥѤο֤	Blade grinding of scissors or nippers
B24B   3/52  C	2	0	3C158	B24B   3/52	75	Хꥫο֤	Blade grinding of clippers
B24B   3/52  Z	2	0	3C158	B24B   3/52	11	¾	Others
B24B   3/54  \	2	2	3C158	B24B   3/54	197	ʥդޤϿʥդο֤	of hand or table knives
B24B   3/55  \	1	1	3C158	B24B   3/55	26	赡ѤΥСʥդο֤	of knife bars for harvesting machines
B24B   3/56  \	1	1	3C158	B24B   3/56	12	饤ӥʥդο֤ʣ££ͥ	of slicing bands (B24B 3/58 takes precedence)
B24B   3/58  \	1	1	3C158	B24B   3/58	19	ȷϤͭ빩ο֤	of tools having scalloped cutting edges
B24B   3/60  \	1	1	3C158	B24B   3/60	2	Υ֥롼פˤʬवʤο֤	of tools not covered by the preceding subgroups
B24B   3/60  A	1	0	3C158	B24B   3/60	7	ߥץݥȥʥդο֤	Mincing plate knife blade grinding
B24B   3/60  C	1	0	3C158	B24B   3/60	27	ΥߡĦϤο֤	Blade grinding of the chisel or graver
B24B   3/60  Z	1	0	3C158	B24B   3/60	135	¾	Others
B24B   5/00  \	0	0	3C043	B24B   5/00	19	ܤʿ̤θޤ๩ʪβž̤򸦺魯褦߷פ줿ޤ֡Τ°֡ʣ££££ͥ表ưȲžưߤ˹ƹԤΤѤۡ˥󥰵ޤ֣££ˡΣ	Machines or devices designed for grinding surfaces of revolution on work, including those which also grind adjacent plane surfaces; Accessories therefor (B24B 11/00-B24B 21/00 take precedence; honing machines or devices using abrading blocks performing axial and rotary movements superimposed on one another B24B 33/00) [2]
B24B   5/00  A	0	0	3C043	B24B   5/00	319	žɽ̸ݻ	Retaining device for rotary surface grinding
B24B   5/00  Z	0	0	3C043	B24B   5/00	185	¾	Others
B24B   5/01  \	1	1	3C043	B24B   5/01	17	ʪβž̤Ȥܤʿ̤򤤤ä˸魯ΡΣ	for combined grinding of surfaces of revolution and of adjacent plane surfaces on work [4]
B24B   5/01  A	1	0	3C043	B24B   5/01	29	̵	Coreless grinding
B24B   5/01  Z	1	0	3C043	B24B   5/01	124	¾	Others
B24B   5/02  \	1	1	3C043	B24B   5/02	109	ʪݻ뤿Υåޤϥ󥿡ͭ	involving centres or chucks for holding work
B24B   5/04  \	2	2	3C043	B24B   5/04	1204	ɽ̤򸦺魯Ρʱ̤ȱ߿̤ȤȤ߹蘆ä̤򸦺魯Σ££	for grinding cylindrical surfaces externally (grinding combined cylindrical and conical surfaces B24B 5/14)
B24B   5/06  \	2	2	3C043	B24B   5/06	292	̤򸦺魯Ρʣ££ͥ	for grinding cylindrical surfaces internally (B24B 5/40 takes precedence)
B24B   5/08  \	3	3	3C043	B24B   5/08	59	ľʹ񥹥ԥɥޤ	involving a vertical tool spindle
B24B   5/10  \	3	3	3C043	B24B   5/10	471	ʿʹ񥹥ԥɥޤ	involving a horizontal tool spindle
B24B   5/12  \	2	2	3C043	B24B   5/12	87	ʣθм֤Ǳ̤ȱ̤Ȥ򸦺魯	for grinding cylindrical surfaces both externally and internally with several grinding wheels
B24B   5/14  \	2	2	3C043	B24B   5/14	114	߿̡㡥󥿡ΤΡ򸦺魯	for grinding conical surfaces, e.g. of centres
B24B   5/16  \	2	2	3C043	B24B   5/16	21	̤줿㡥Х른ù줿̤򸦺魯	for grinding peculiarly profiled surfaces, e.g. bulged
B24B   5/18  \	1	1	3C043	B24B   5/18	22	ʪٻ⤷ͳưޤϲž뤿Υ󥿡쥹֤ͭΡΣ	involving centreless means for supporting, guiding, floating or rotating work [2]
B24B   5/18  A	1	0	3C043	B24B   5/18	247	Ĵ֡ݥͭ뿴̵	Coreless grinding machine having the adjusting wheel and work receiving stand
B24B   5/18  B	1	1	3C043	B24B   5/18	125	ݥ½ħ	characterized by work loading/unloading
B24B   5/18  C	1	2	3C043	B24B   5/18	20	Ĺܺ	Carrying a long member
B24B   5/18  D	1	0	3C043	B24B   5/18	104	ݥפޤϥݥ륿פΤ	Shoe type or roll type
B24B   5/18  E	1	1	3C043	B24B   5/18	47	̸ѤΤ	for inner surface grinding
B24B   5/18  F	1	1	3C043	B24B   5/18	59	ݥ½ħ	characterized by work loading/unloading
B24B   5/18  G	1	0	3C043	B24B   5/18	60	ɥĥ󥰤Ԥ	Dressing performed
B24B   5/18  Z	1	0	3C043	B24B   5/18	87	¾	Others
B24B   5/20  \	2	2	3C043	B24B   5/20	24	¤ιߤ줿Τͭ	involving grooved abrading blocks
B24B   5/22  \	2	2	3C043	B24B   5/22	132	ɽ̡㡥ܥȤαɽ̡򸦺魯	for grinding cylindrical surfaces, e.g. on bolts
B24B   5/24  \	2	2	3C043	B24B   5/24	55	߿̤򸦺魯	for grinding conical surfaces
B24B   5/26  \	2	2	3C043	B24B   5/26	28	̤줿㡥Х른ù줿̤򸦺魯	for grinding peculiarly profiled surfaces, e.g. bulged
B24B   5/28  \	2	2	3C043	B24B   5/28	51	ʪα߹ФƱŪʳɽ̤򸦺魯ΤǡŪʥ󥿡֤ͭ	for grinding outer surfaces concentrically to bores, involving additional centring means
B24B   5/30  \	2	2	3C043	B24B   5/30	96	Ĵ֡Τ	Regulating-wheels; Equipment therefor
B24B   5/307  \	2	2	3C043	B24B   5/307	252	ʪٻ뤿μʡΣ	Means for supporting work [3]
B24B   5/313  \	1	1	3C043	B24B   5/313	1	Ϣ³ŪʣĤιʪٻ빩ʪٻʤͭΡΣ	involving work-supporting means carrying several workpieces to be operated on in succession [3]
B24B   5/313  A	1	0	3C043	B24B   5/313	24	ݥۥݥιʪٻʤͭ	having a star wheel type work supporting means
B24B   5/313  B	1	0	3C043	B24B   5/313	24	Ĵ֤ߤ줿餻¤ˤ	Feeding by the spiral groove provided on the adjusting wheel
B24B   5/313  C	1	0	3C043	B24B   5/313	16	٥ʤ˻ٻ	supported by a conveyer means
B24B   5/313  Z	1	0	3C043	B24B   5/313	53	¾	Others
B24B   5/32  \	2	2	3C043	B24B   5/32	9	ФǽʹʪٻʡΣ	the work-supporting means being indexable [3]
B24B   5/35  \	1	1	3C043	B24B   5/35	91	°֡Σ	Accessories [3]
B24B   5/36  \	1	1	3C043	B24B   5/36	313	ѵޤ	Single-purpose machines or devices
B24B   5/37  \	2	2	3C043	B24B   5/37	872	롤㡥뷿롤򸦺魯ΡΣ	for grinding rolls, e.g. barrel-shaped rolls [4]
B24B   5/38  \	2	2	3C043	B24B   5/38	352	ĹܤǺࡤ㡥磻䡤γɽ̤򸦺魯	for externally grinding travelling elongated stock, e.g. wire
B24B   5/40  \	2	2	3C043	B24B   5/40	23	ɤ̤򸦺魯	for grinding tubes internally
B24B   5/40  B	2	0	3C043	B24B   5/40	125	֤ưݥ˼դ줿	Polishing device attached to the rocking arm
B24B   5/40  C	2	0	3C043	B24B   5/40	80	ϩǥ磻ˤưΡ̣Ĥͥ	Polishing material reciprocally moved in the tube by the wire, etc. (D takes precedence.)
B24B   5/40  D	2	0	3C043	B24B   5/40	47	ʤĤɤΤΤ	for the bent tube
B24B   5/40  E	2	0	3C043	B24B   5/40	202	ʬħΤ	characterized by the polishing part
B24B   5/40  Z	2	0	3C043	B24B   5/40	128	¾̼ΩԷ͡	Others (free running type R 27/00 M)
B24B   5/42  \	2	2	3C043	B24B   5/42	546	󥯼ޤϥ󥯥ԥ򸦺魯	for grinding crankshafts or crankpins
B24B   5/44  \	2	2	3C043	B24B   5/44	7	ء㡥žѤΤΡΥ򸦺魯	for grinding rims of vehicle wheels, e.g. for bicycles
B24B   5/46  \	2	2	3C043	B24B   5/46	14	Ŵƻؤ򸦺魯	for grinding railway car wheels
B24B   5/48  \	2	2	3C043	B24B   5/48	84	˺٤㡥ȴѥιɤ򸦺魯	for grinding walls of very fine holes, e.g. in drawing-dies
B24B   5/50  \	1	1	3C043	B24B   5/50	238	蘆٤°ʪΤκФ̤߷פˤħŤΡ㡥ڴθθ	characterised by a special design with respect to properties of the material of non-metallic articles to be ground, e.g. strings
B24B   7/00  \	0	0	3C043	B24B   7/00	12	ʿóʥ饹̤θޤ๩ʪʿ̤򸦺魯뤿߷פ줿ޤ֡Τ°֡ʣ££ͥ表ʪʿ̤Υۡ˥󥰣££ˡΣ	Machines or devices designed for grinding plane surfaces on work, including polishing plane glass surfaces; Accessories therefor (B24B0021000000 takes precedence;honing of plane surfaces on work B24B0033055000)[4]
B24B   7/00  A	0	0	3C043	B24B   7/00	247	ƥơݥ󤴤Ȥ˸κȤԤ	Work such as grinding, polishing, etc. performed on each station
B24B   7/00  Z	0	0	3C043	B24B   7/00	486	¾	Others
B24B   7/02  \	1	1	3C043	B24B   7/02	418	ư빩ʪٻơ֥ͭΡΣ	involving a reciprocatingly-moved work-table [4]
B24B   7/04  \	1	1	3C043	B24B   7/04	19	žʪٻơ֥ͭ	involving a rotary work-table
B24B   7/04  A	1	0	3C043	B24B   7/04	1696	ݥžФžƸ魯ΡξԤβžƱп	Grinding performed by work rotation and grindstone rotation (both rotary axes are coaxial or eccentric)
B24B   7/04  B	1	1	3C043	B24B   7/04	282	桤ФβžݥФŪ˰ưľưưͤ	Rotary axis of the grindstone that moves (linearly or rocks) relatively to the work during grinding
B24B   7/04  Z	1	0	3C043	B24B   7/04	200	¾	Others
B24B   7/06  \	1	1	3C043	B24B   7/06	113	٥٥ȡ󥹰ư빩ʪٻơ֥ޤΤΡͭ	involving conveyor belts, a sequence of travelling work-tables or the like
B24B   7/07  \	1	1	3C043	B24B   7/07	115	ưʤʪٻơ֥ͭΡΣ	involving a stationary work-table [4]
B24B   7/08  \	2	2	3C043	B24B   7/08	10	ȹм֤ͭ	having an abrasive wheel built in
B24B   7/10  \	1	1	3C043	B24B   7/10	260	ѵޤ	Single-purpose machines or devices
B24B   7/12  \	2	2	3C043	B24B   7/12	436	ԤĹǺࡤ㡥ȥå׾ʪ򸦺魯ΡΣ	for grinding travelling elongated stock, e.g. strip-shaped work [4]
B24B   7/13  \	3	3	3C043	B24B   7/13	66	뤫饳ذưǺ򸦺魯ΡΣ	grinding while stock moves from coil to coil [4]
B24B   7/14  \	2	2	3C043	B24B   7/14	13	̤򸦺魯ΡΣ	for grinding slideways [4]
B24B   7/16  \	2	2	3C043	B24B   7/16	13	ü̡㡥顼ʥåȡԥȥ󥰤ü̡򸦺魯Ρʹʪβž̤Ȥܤʿ̤򤤤ä˸魯Σ££ˡΣ	for grinding end faces, e.g. of gauges, rollers, nuts or piston rings (for combined grinding of surfaces of revolution and of adjacent plane surfaces on work B24B 5/01) [4]
B24B   7/16  A	2	0	3C043	B24B   7/16	55	ݥݥݡʥĥȡԥȥ󥰤Τ	Gauge, roller, nut, or piston ring only
B24B   7/16  F	2	0	3C043	B24B   7/16	105	ɤü̸̼ޤޤ	Bar or pipe end surface grinding (not including chamfering)
B24B   7/16  H	2	0	3C043	B24B   7/16	116	ץ󥰤ü̸	Spring end surface grinding
B24B   7/16  Z	2	0	3C043	B24B   7/16	251	¾	Others
B24B   7/17  \	3	3	3C043	B24B   7/17	26	ξʿṳ̈Ʊ魯Ρ㡥֥ǥ饤Σ	for simultaneously grinding opposite and parallel end faces, e.g. double disc grinders [4]
B24B   7/17  A	3	0	3C043	B24B   7/17	100	֥ݥǥθ¾Υǥʪʤޤ	Brake disk grinding (including other disk type items)
B24B   7/17  Z	3	0	3C043	B24B   7/17	789	¾ξƬʿ̸ס	Others (double0geaded plane grinding machine)
B24B   7/18  \	2	2	3C043	B24B   7/18	169	ɡŷޤΤΤ򸦺魯	for grinding floorings, walls, ceilings or the like
B24B   7/19  \	2	2	3C043	B24B   7/19	85	ʿͤ򸦺魯ΡΣ	for grinding plane decorative patterns [4]
B24B   7/20  \	1	1	3C043	B24B   7/20	187	蘆٤°ʪΤκФ̤߷פˤħŤ	characterised by a special design with respect to properties of the material of non-metallic articles to be ground
B24B   7/22  \	2	2	3C043	B24B   7/22	40	̵㡥Сߥå򸦺魯	for grinding inorganic material, e.g. stone, ceramics, porcelain
B24B   7/22  A	2	0	3C043	B24B   7/22	278	ݥưʤ鸦魯	Grinding performed while the work is being moved
B24B   7/22  C	2	0	3C043	B24B   7/22	176	ݥư̽ˡפΤߤ֤ͭΤޤ	Work not moved (including those purely having the device for feed only)
B24B   7/22  Z	2	0	3C043	B24B   7/22	640	¾	Others
B24B   7/24  \	3	3	3C043	B24B   7/24	16	饹򸦺ޤϸ᤹	for grinding or polishing glass
B24B   7/24  A	3	0	3C043	B24B   7/24	206	ݥưʤ鸦᤹	Grinding or polishing performed while the work is being moved
B24B   7/24  C	3	0	3C043	B24B   7/24	56	ݥư	Work not moved
B24B   7/24  E	3	0	3C043	B24B   7/24	161	ݥžФžƸ᤹	Grinding or polishing performed by work rotation and grindstone rotation
B24B   7/24  Z	3	0	3C043	B24B   7/24	247	¾	Others
B24B   7/26  \	4	4	3C043	B24B   7/26	34	Ϣ³Ԥ륬饹ȤޤϥХɤξ̤Ʊޤϸ᤹	for simultaneously grinding or polishing opposite faces of continuously travelling sheets or bands of glass
B24B   7/28  \	2	2	3C043	B24B   7/28	162	ں򸦺魯	for grinding wood
B24B   7/30  \	2	2	3C043	B24B   7/30	82	ץ饹å򸦺魯ΡΣ	for grinding plastics [4]
B24B   9/00  \	0	0	3C049	B24B   9/00	11	ʪüޤϼ̤򸦺ޤϥХΤ߷פ줿ޤ֡Τ°֡ʣ££ͥ表οϤθ££ͷΥγˤХ££	Machines or devices designed for grinding edges or bevels on work or for removing burrs; Accessories therefor (B24B 21/00 takes precedence; for sharpening cutting edges on tools B24B 3/00; removing burrs by loose abrasive material B24B 31/00)
B24B   9/00  T	0	0	3C049	B24B   9/00	39	ḻ̌ܳüϣŻȡ	Linear welding bevel (bevel of the cylinder end surface B24B9/00,601@E)
B24B   9/00  U	0	1	3C049	B24B   9/00	40	ݥɥݥʥ	Squeegee, doctor knife
B24B   9/00  Z	0	0	3C049	B24B   9/00	70	¾	Others
B24B   9/00 601 \	1	1	3C049	B24B   9/00	1	üڤӼ̤򸦺魯	Grinding the end or diagonal surface
B24B   9/00 601 A	1	0	3C049	B24B   9/00	179	ùʪηꤵƤ	Shape of the work identified
B24B   9/00 601 B	1	1	3C049	B24B   9/00	555	ľΡѺ	Plate member, square bar
B24B   9/00 601 C	1	2	3C049	B24B   9/00	122	Ĺܺ¦üμĤ¦üϡֿޡ	Side end of a long member (mainly the side end of a band plate)
B24B   9/00 601 D	1	2	3C049	B24B   9/00	43	Ĺܺü	End of a long member
B24B   9/00 601 E	1	1	3C049	B24B   9/00	250	߼̤ĤΡμĹܤɺϡֿޡ	having a circumferential surface (mainly long bar or pipe member)
B24B   9/00 601 F	1	2	3C049	B24B   9/00	126	û졤ûɡα߸̤ΰͭΤޤࡤȾ졤Ⱦߴ	Short column or short pipe (including those having a part of an arc, half column, half pipe, etc.)
B24B   9/00 601 G	1	2	3C049	B24B   9/00	326	ġα߸̤ΰͭΤޤࡤϡֿޡ	Disk (including those having a part of an arc, sector, etc.)
B24B   9/00 601 H	1	3	3C049	B24B   9/00	922	ȾƳΥϡڷͭΤޤ롤Хޤ	Semiconductor wafer (including those having a notch, including deburring)
B24B   9/00 601 J	1	2	3C049	B24B   9/00	133	ľΡֿޡ	Ring type member
B24B   9/00 601 K	1	1	3C049	B24B   9/00	119	ꡤĶδɡľϣšơʡϡֿޡ	Inner periphery of a hole or closed curve (E, F, J for the inner periphery of a pipe or ring type member)
B24B   9/00 601 L	1	0	3C049	B24B   9/00	91	ùʪηꤵƤʤΡΣ££˳ϣʬͿ	Shape of the work not identified (If B 24 B 17/ is applicable, it is also assigned.)
B24B   9/00 601 Z	1	0	3C049	B24B   9/00	26	¾	Others
B24B   9/00 602 \	1	1	3C049	B24B   9/00	2	ХԤΡüڤӼ̤򸦺魯뤳ȤƱ˹Ԥʤ££ͥ	Deburring (If grinding the end or diagonal surface is performed simultaneously, B 24 B 9/00 601 takes precedence.)
B24B   9/00 602 A	1	0	3C049	B24B   9/00	200	ùʪηꤵƤ	Shape of the work identified
B24B   9/00 602 B	1	1	3C049	B24B   9/00	146	ľΡѺ	Plate member, square bar
B24B   9/00 602 C	1	2	3C049	B24B   9/00	87	Ĺܺ¦üμĤ¦ü	Side end of a long member (mainly the side end of a band plate)
B24B   9/00 602 D	1	2	3C049	B24B   9/00	49	Ĺܺü	End of a long member
B24B   9/00 602 E	1	1	3C049	B24B   9/00	100	߼̤ĤΡμĹܤɺ	having a circumferential surface (mainly long bar or pipe member)
B24B   9/00 602 F	1	2	3C049	B24B   9/00	70	û졤ûɡα߸̤ΰͭΤޤࡤȾ졤Ⱦߴ	Short column or short pipe (including those having a part of an arc, half column, half pipe, etc.)
B24B   9/00 602 G	1	2	3C049	B24B   9/00	27	ġα߸̤ΰͭΤޤࡤ	Disk (including those having a part of an arc, sector, etc.)
B24B   9/00 602 J	1	2	3C049	B24B   9/00	37	ľ	Ring type member
B24B   9/00 602 K	1	1	3C049	B24B   9/00	104	ꡤĶδɡľϣšơʡ	Inner periphery of a hole or closed curve (E, F, J for the inner periphery of a pipe or ring type member)
B24B   9/00 602 L	1	0	3C049	B24B   9/00	261	ùʪηꤵƤʤΡΣ££˳ϣʬͿ	Shape of the work not identified (If B 24 B 17/ is applicable, it is also assigned.)
B24B   9/00 602 Z	1	0	3C049	B24B   9/00	21	¾	Others
B24B   9/02  \	1	1	3C049	B24B   9/02	6	蘆٤ʪΤκ˴ؤ̤߷פˤħŤ	characterised by a special design with respect to properties of materials specific to articles to be ground
B24B   9/02  A	1	0	3C049	B24B   9/02	32	üᡦХ̻֥饷ü	Flexible wire member tip polishing or deburring (toothbrush tip, etc.)
B24B   9/02  B	1	0	3C049	B24B   9/02	61	ü̡Υ٥ȡ͡ʿϣϡֿޡ	End or diagonal surface of a flexible member (belt, rubber, etc.) (7/20 for the flat surface)
B24B   9/02  Z	1	0	3C049	B24B   9/02	30	¾	Others
B24B   9/04  \	2	2	3C049	B24B   9/04	4	°㡥Ѷ񡤤θ	of metal, e.g. skate blades
B24B   9/04  A	2	0	3C049	B24B   9/04	27	ݥѶ	Clamp for the skate shoes
B24B   9/04  C	2	0	3C049	B24B   9/04	207	ܥӡݥɤθᡦ	Polishing or cleaning of welding beads
B24B   9/04  Z	2	0	3C049	B24B   9/04	29	¾	Others
B24B   9/06  \	2	2	3C049	B24B   9/06	14	°̵㡥Сߥåθ	of non-metallic inorganic material, e.g. stone, ceramics, porcelain
B24B   9/06  A	2	0	3C049	B24B   9/06	29	ƫ	Pottery or tableware
B24B   9/06  Z	2	0	3C049	B24B   9/06	112	¾ȾƳΥϢ̡	Others (semiconductor wafer R 9/00 L)
B24B   9/08  \	3	3	3C049	B24B   9/08	7	饹θ	of glass
B24B   9/08  A	3	0	3C049	B24B   9/08	40	ץ饹	Watch glass
B24B   9/08  C	3	0	3C049	B24B   9/08	62		Disk
B24B   9/08  Z	3	0	3C049	B24B   9/08	181	¾㡥۷饹ľϡ	Others, e.g. irregular shape glass, curved part; 9/10 for the linear part
B24B   9/10  \	4	4	3C049	B24B   9/10	258	ĥ饹θ	of plate glass
B24B   9/10  A	4	0	3C049	B24B   9/10	27	襤	Self profiling
B24B   9/10  B	4	0	3C049	B24B   9/10	7	ޥ臘	Profiling of the master
B24B   9/10  C	4	0	3C049	B24B   9/10	77	Σåǡ˴Ť	based on NC data
B24B   9/10  D	4	0	3C049	B24B   9/10	432	ϹŪľư뤳Ȥˤäƥľʬù	Work's linear part machined by relative linear motion of the work or tool
B24B   9/10  E	4	0	3C049	B24B   9/10	89	ĺ̼	Vertex chamfering
B24B   9/10  Z	4	0	3C049	B24B   9/10	174	¾	Others
B24B   9/12  \	4	4	3C049	B24B   9/12	5	饹㡥ѥ饹¸ѥ㡼ƥӥ֥饦ѥѥͥ롤θ	of hollow glassware, e.g. drinking glasses, preserve jars, television picture tube viewing panels
B24B   9/12  A	4	0	3C049	B24B   9/12	29	ʪѥ饹֥	Drink glass, tumbler
B24B   9/12  C	4	0	3C049	B24B   9/12	30	ԣ֥֥饦ɥѥͥ	TV CRT panel
B24B   9/12  Z	4	0	3C049	B24B   9/12	20	¾	Others
B24B   9/14  \	4	4	3C049	B24B   9/14	664	عʪ㡥󥺡ץꥺࡤθ	of optical work, e.g. lenses, prisms
B24B   9/14  A	4	0	3C049	B24B   9/14	473	ᥬͥ󥺤αζϡΣ¡Ȥʣ˳Ϳ	Trimming of lenses of eyeglasses (ball grinding machine) (If some of B to H are applicable, they are all assigned.)
B24B   9/14  B	4	1	3C049	B24B   9/14	172	ФħΤ	characterized by centring
B24B   9/14  C	4	1	3C049	B24B   9/14	203	еפ˴ؤơĤ臘	Profiling of the template regarding the shingle path
B24B   9/14  D	4	1	3C049	B24B   9/14	223	еפ˴ؤơᥬͥե졼臘	Profiling of eyeglasses frame regarding the edge path
B24B   9/14  E	4	1	3C049	B24B   9/14	338	еפ˴ؤơΣåǡ˴Ť	based on NC data regarding the edge path
B24B   9/14  F	4	1	3C049	B24B   9/14	228	и˴ؤơľܷ¬	Direct measurement of the edge thickness
B24B   9/14  G	4	1	3C049	B24B   9/14	41	и˴ؤơ¾Υǡ黻ˤäƵ	Obtaining the edge thickness by calculating other data
B24B   9/14  H	4	1	3C049	B24B   9/14	191	ɽǽͭ	having an image display function
B24B   9/14  J	4	0	3C049	B24B   9/14	164	ᥬͥ󥺰ʳΥ󥺤α	Lens trimming for other than eyeglasses lenses
B24B   9/14  K	4	1	3C049	B24B   9/14	200	ФħΤ	characterized by centring
B24B   9/14  L	4	0	3C049	B24B   9/14	70	󥺰ʳθعʪ᤹Ρ㡥ץꥺ	Polishing of an optical work other than lenses, e.g. prism
B24B   9/14  Z	4	0	3C049	B24B   9/14	54	¾	Others
B24B   9/16  \	3	3	3C049	B24B   9/16	167	ɡФޤΤΤθɸﵡΥɥåסɥåץۥޤѻüɤޤϥեθ££ˡΣ	of diamonds, of jewels or the like; Diamond grinders' dops; Dop holders or tongs (for grinding sharp pointed diamonds or sapphires B24B 19/16) [4]
B24B   9/18  \	2	2	3C049	B24B   9/18	39	ںθ	of wood
B24B   9/20  \	2	2	3C049	B24B   9/20	30	ץ饹åθΣ	of plastics [4]
B24B  11/00  \	0	0	3C049	B24B  11/00	203	ʪεʬޤϵ̤򸦺魯뤿߷פ줿ޤ֡Τ°	Machines or devices designed for grinding spherical surfaces or parts of spherical surfaces on work; Accessories therefor
B24B  11/02  \	1	1	3C049	B24B  11/02	208	Τ򸦺魯	for grinding balls
B24B  11/04  \	2	2	3C049	B24B  11/04	30	м֤ͭ	involving grinding wheels
B24B  11/06  \	3	3	3C049	B24B  11/06	215	̡㡥ʿ̡̡ޤϷ̡򸦺̤Ȥ	acting by the front faces, e.g. of plane, grooved, or bevelled shape
B24B  11/08  \	3	3	3C049	B24B  11/08	132	Ϥ򸦺̤Ȥ	acting by the circumference
B24B  11/10  \	3	3	3C049	B24B  11/10	74	зФͭ	of cup type
B24B  13/00  \	0	0	3C049	B24B  13/00	18	󥺤θ̤ޤ¾ιʪη̤򸦺魯뤿߷פ줿ޤ֡Τ°֡ʸǺࡤ㡥󥺡ץꥺࡤΤդ££ˡΣ	Machines or devices designed for grinding or polishing optical surfaces on lenses or surfaces of similar shape on other work; Accessories therefor (edging optical work, e.g. lenses, prisms, B24B 9/14) [2]
B24B  13/00  A	0	0	3C049	B24B  13/00	319	̥󥺤ΤΤ	for the non-spherical lens
B24B  13/00  E	0	1	3C049	B24B  13/00	47	󥺤ΤΤ	for the cylindrical lens
B24B  13/00  F	0	1	3C049	B24B  13/00	25	¿󥺤ΤΤ	for the multi-focus lens
B24B  13/00  G	0	1	3C049	B24B  13/00	82	ȡݥĥ̥󥺤ΤΤ	For the toric lens
B24B  13/00  B	0	0	3C049	B24B  13/00	48	󥿥ȥ󥺤ΤΤ	for the contact lens
B24B  13/00  C	0	0	3C049	B24B  13/00	240	󥺸Τ°֤˷	related to the accessory or supplementary device for lens polishing
B24B  13/00  D	0	1	3C049	B24B  13/00	135	󥺤ζ롦ӽС	Lens supply, unloading, transfer
B24B  13/00  Z	0	0	3C049	B24B  13/00	407	¾	Others
B24B  13/005  \	1	1	3C049	B24B  13/005	43	֥åʡåޤΤΡ֡Σ	Blocking means, chucks or the like; Alignment devices [4]
B24B  13/005  A	1	0	3C049	B24B  13/005	99	󥺥֥ĥΥ󥺤Υ󥺤	Lens peeling from the lens block, lens washing
B24B  13/005  Z	1	0	3C049	B24B  13/005	623	¾̥ݻʤɡ	Others (lens holder, etc.)
B24B  13/01  \	1	1	3C049	B24B  13/01	578	ü칩㡥ҷ񡨤ι¤ɥå󥰤ޤϸΣ	Specific tools, e.g. bowl-like; Production, dressing or fastening of these tools [4]
B24B  13/015  \	1	1	3C049	B24B  13/015	82	ƥӥ֥饦ѥѥͥ롤إåɥ饤ȿʹޤΤΤθΣ	of televison picture tube viewing panels, headlight reflectors or the like [4]
B24B  13/02  \	1	1	3C049	B24B  13/02	30	󥺤бθ̤ͭ빩ˤ	by means of tools with abrading surfaces corresponding in shape with the lenses to be made
B24B  13/02  A	1	0	3C049	B24B  13/02	39	󥺤ưΡΣˤʣ˳Ϳ	Lens that moves (If some of A to K are applicable, they are all assigned.)
B24B  13/02  B	1	1	3C049	B24B  13/02	55	ľư	Linear reciprocal motion
B24B  13/02  C	1	1	3C049	B24B  13/02	129	߸ư	Reciprocal arc rocking
B24B  13/02  D	1	1	3C049	B24B  13/02	37	пư	Eccentric motion
B24B  13/02  E	1	0	3C049	B24B  13/02	47	񤬱ư	Tool that moves
B24B  13/02  F	1	1	3C049	B24B  13/02	46	ľ	Linear reciprocal motion
B24B  13/02  G	1	1	3C049	B24B  13/02	185	߸ư	Reciprocal arc rocking
B24B  13/02  H	1	1	3C049	B24B  13/02	35	пư	Eccentric motion
B24B  13/02  J	1	0	3C049	B24B  13/02	239	󥺤ưϤˤäƲžΡιˤäϢꤹΤϴޤޤʤ	Lens rotated by a drive force (not including those rotated by the tool)
B24B  13/02  K	1	0	3C049	B24B  13/02	248	󥺤ưϤˤäƲžʤΡιˤäϢꤹΤޤ	Lens not rotated by a drive force (including those rotated by the tool)
B24B  13/02  Z	1	0	3C049	B24B  13/02	37	¾	Others
B24B  13/04  \	1	1	3C049	B24B  13/04	19	ư֤ˤ椵м֤ͭ󥺤θʣ££ͥˡΣ	grinding of lenses involving grinding wheels controlled by gearing (B24B 13/06 takes precedence) [4]
B24B  13/04  A	1	0	3C049	B24B  13/04	15	󥺤ưΡΣˤʣ˳Ϳ	Lens that moves (If some of A to K are applicable, they are all assigned.)
B24B  13/04  B	1	1	3C049	B24B  13/04	19	ľư	Linear reciprocal motion
B24B  13/04  C	1	1	3C049	B24B  13/04	25	߸ư	Reciprocal arc rocking
B24B  13/04  D	1	1	3C049	B24B  13/04	1	пư	Eccentric motion
B24B  13/04  E	1	0	3C049	B24B  13/04	37	񤬱ư	Tool that moves
B24B  13/04  F	1	1	3C049	B24B  13/04	34	ľư	Linear reciprocal motion
B24B  13/04  G	1	1	3C049	B24B  13/04	83	߸ư	Reciprocal arc rocking
B24B  13/04  H	1	1	3C049	B24B  13/04	4	пư	Eccentric motion
B24B  13/04  J	1	0	3C049	B24B  13/04	182	󥺤ưϤˤäƲžΡιˤäϢꤹΤϴޤޤʤ	Lens rotated by a drive force (not including those rotated by the tool)
B24B  13/04  K	1	0	3C049	B24B  13/04	34	󥺤ưϤˤäƲžʤΡιˤäϢꤹΤޤ	Lens not rotated by a drive force (including those rotated by the tool)
B24B  13/04  Z	1	0	3C049	B24B  13/04	16	¾	Others
B24B  13/06  \	1	1	3C049	B24B  13/06	179	ݻʡ㡥ѥ󡤥ѥơסơסˤ椵󥺡ޤϹʪθΣ	grinding of lenses, the tool or work being controlled by information carrying means, e.g. patterns, punched tapes, magnetic tapes [4]
B24B  15/00  \	0	0	3C049	B24B  15/00	85	̤򸦺魯뤿߷פ줿ޤ֡Τ°	Machines or devices designed for grinding seat surfaces; Accessories therefor
B24B  15/02  \	1	1	3C049	B24B  15/02	124	Х֥ϥ󥰤κ̤򸦺魯	in valve housings
B24B  15/03  \	2	2	3C049	B24B  15/03	17	Ѥޤϲ·ѤΡΣ	using portable or mobile machines [4]
B24B  15/04  \	1	1	3C049	B24B  15/04	82	Х֤Υ̤򸦺魯	on valve members
B24B  15/06  \	1	1	3C049	B24B  15/06	17	ƴﳫΥ̤θƴޤΤΤΥ̤򸦺魯ΡΣ	on openings of bottles; on bottle stoppers or the like [4]
B24B  15/08  \	1	1	3C049	B24B  15/08	135	Х֥ϥ󥰤ȥݥڥåȥХ֤Τ줫ŪưȤˤ̤򸦺魯	for grinding co-operating seat surfaces by moving one over the other
B24B  17/00  \	0	0	3C049	B24B  17/00	5	ǥ롤̡ơפޤΤΤˤä椵븦ﵡޤ֤ͭαѡΤ°֡Σ	Special adaptations of machines or devices for grinding controlled by patterns, drawings, magnetic tapes or the like; Accessories therefor [4]
B24B  17/02  \	1	1	3C049	B24B  17/02	27	ŪãʤΤߤͭ	involving mechanical transmission means only
B24B  17/02  A	1	0	3C049	B24B  17/02	36	ʳܿҤǥȤ臘	Profiling of the work itself by the contactor other than the tool
B24B  17/02  B	1	0	3C049	B24B  17/02	166	ʳܿҤǥޥ臘	Profiling of the master by the contactor other than the tool
B24B  17/02  Z	1	0	3C049	B24B  17/02	50	¾	Others
B24B  17/04  \	1	1	3C049	B24B  17/04	13	ŪʤͭΡ㡥Ʒﵡ	involving optical auxiliary means, e.g. optical projection form grinding machines
B24B  17/04  A	1	0	3C049	B24B  17/04	109	Ƥ줿臘ΡθƷﵡ	Profiling of the projected image (optical projection type grinding machine)
B24B  17/04  Z	1	0	3C049	B24B  17/04	9	¾	Others
B24B  17/06  \	2	2	3C049	B24B  17/06	8	ŵŪãʤȤ߹蘆줿Ρ㡥Ŵɤˤ椵	combined with electrical transmission means, e.g. controlled by photoelectric cells
B24B  17/06  A	2	0	3C049	B24B  17/06	15	ŪμʤǥȤΤ	Detection of the work itself by an optical detection means
B24B  17/06  B	2	0	3C049	B24B  17/06	9	ŪμʤǥʳΤ	Detection of other than the work by an optical detection means
B24B  17/06  Z	2	0	3C049	B24B  17/06	0	¾	Others
B24B  17/08  \	1	1	3C049	B24B  17/08	0	ήãʤΤߤͭ	involving fluid transmission means only
B24B  17/08  A	1	0	3C049	B24B  17/08	7	ʳθμʤήʤˤä椷Ȥ臘	Profiling of the work itself by controlling the detection means for other than the tool by using the fluid control means
B24B  17/08  B	1	0	3C049	B24B  17/08	4	ʳθμʤήʤˤä椷ޥ臘	Profiling of the master by controlling the detection means for other than the tool by using the fluid control means
B24B  17/08  C	1	0	3C049	B24B  17/08	38	񵡹ήʤˤä椹	Control of the tool mechanism by the fluid control means
B24B  17/08  Z	1	0	3C049	B24B  17/08	2	¾	Others
B24B  17/10  \	1	1	3C049	B24B  17/10	15	ŵŪãʤΤߤͭΡ㡥ơפˤ椵褦	involving electrical transmission means only, e.g. controlled by magnetic tape
B24B  17/10  A	1	0	3C049	B24B  17/10	42	ήŰŵŪμʤǥȤľܸΤΡܿμʤˤΡ	Direct detection of the work itself by an electrical detection means for the current, voltage, magnetism, etc. (by the contactless detection means)
B24B  17/10  D	1	0	3C049	B24B  17/10	7	ήŰŵŪμʤǥޥľܸΤΡܿμʤˤΡ	Direct detection of the master by an electrical detection means for the current, voltage, magnetism, etc. (by the contactless detection means)
B24B  17/10  G	1	0	3C049	B24B  17/10	58	ήŰŵŪμʤǹ񵡹ξ֤ΤΡιΤμʤǤΡ	Detection of the tool mechanism state by an electrical detection means for the current, voltage, magnetism, etc. (tool itself as the detection means)
B24B  17/10  K	1	0	3C049	B24B  17/10	19	ήŰŵŪμʤܿҤξ֤ΤΡιʳܿμʤˤΡ	Detection of the contactor state by an electrical detection means for the current, voltage, magnetism, etc. (by the contact detection means for other than the tool)
B24B  17/10  P	1	0	3C049	B24B  17/10	175	ϿΤˤäƵϿ줿ǡ椹ΡΥƥ󥰤ޤ	Control based of the data recorded by the recording medium (including teaching)
B24B  17/10  Z	1	0	3C049	B24B  17/10	7	¾	Others
B24B  19/00  \	0	0	3C049	B24B  19/00	22	¾Υᥤ󥰥롼פΤɤˤʬवʤθùѵޤ֡ʥͥθ£ǣ	Single purpose machines or devices for particular grinding operations not covered by any other main group (grinding screw threads B23G 1/36)
B24B  19/00  G	0	0	3C049	B24B  19/00	26	ӻץݥ̤θ̷̤θޤ	Grinding of the outer curved surface of the wrist watch case (including grinding of the slope surface)
B24B  19/00  Z	0	0	3C049	B24B  19/00	522	¾	Others
B24B  19/00 603 \	1	1	3C049	B24B  19/00	3	եСθμüʿ̡̡ü̸ʬह롨㡥եСͥ	Polishing of the optical fibre (mainly polishing of the flat surface, spherical surface, or special curved surface of the end is categorised;, e.g. optical fibre connector)
B24B  19/00 603 A	1	0	3C049	B24B  19/00	108	Υե롼줿֤Ǹ᤹ΡΣŤʣ˳Ϳ	Polishing in the state that the object is inserted into a cylindrical ferrule (If some of A to E are applicable, they are all assigned.)
B24B  19/00 603 B	1	1	3C049	B24B  19/00	253	ṳ̈ʿ̤˸᤹빩ͭ	having a process that polishes the end surface to a flat surface
B24B  19/00 603 C	1	1	3C049	B24B  19/00	204	ṳ̤̈˸᤹빩ͭ	having a process that polishes the end surface to a spherical surface
B24B  19/00 603 D	1	1	3C049	B24B  19/00	55	ṳ̈򤽤¾η˸᤹빩ͭ	having a process that polishes the end surface to any other shape
B24B  19/00 603 E	1	0	3C049	B24B  19/00	89	ʳηΥե롼ϥͥ줿֤Ǹ᤹	Polishing in the state that the object is inserted into a non-cylindrical ferrule or connector
B24B  19/00 603 Z	1	0	3C049	B24B  19/00	146	¾	Others
B24B  19/02  \	1	1	3C049	B24B  19/02	686	¡㡥եȤι¡󥰤ι¡塼֤ι¡Ĵ±ưϢǤι¡򸦺魯ΡΣ	for grinding grooves, e.g. on shafts, in casings, in tubes, homokinetic joint elements [4]
B24B  19/03  \	2	2	3C049	B24B  19/03	29	饹ʪ˹¡㡥ѹ¡򸦺魯ΡΣ	for grinding grooves in glass workpieces, e.g. decorative grooves [4]
B24B  19/04  \	2	2	3C049	B24B  19/04	80	ɥ륷󥯤¤򸦺魯	for fluting drill shanks
B24B  19/06  \	2	2	3C049	B24B  19/06	164	졼㡥顼졼򸦺魯	for grinding races, e.g. roller races
B24B  19/08  \	1	1	3C049	B24B  19/08	7	߷̹ʪ㡥ʱߤޤ¿ѷ̤Υեȡ򸦺魯	for grinding non-circular cross-sections, e.g. shafts of elliptical or polygonal cross-section
B24B  19/08  A	1	0	3C049	B24B  19/08	88	ݥžʤ鸦魯	Polishing performed while the work is being rotated
B24B  19/08  Z	1	0	3C049	B24B  19/08	322	¾	Others
B24B  19/09  \	2	2	3C049	B24B  19/09	109	ȥ̡㡥Х󥱥롦󥸥Υϥ󥰡򸦺魯ΡΣ	for grinding trochoidal surfaces, e.g. in rotor housings of Wankel engines [4]
B24B  19/10  \	2	2	3C049	B24B  19/10	21	ԥȥ򸦺魯	for grinding pistons
B24B  19/11  \	2	2	3C049	B24B  19/11	44	󥰡㡥ԥȥ󥰡α߼̤򸦺魯ΡΣ	for grinding the circumferential surface of rings, e.g. piston rings [4]
B24B  19/12  \	2	2	3C049	B24B  19/12	24	ޤϥॷեȤ򸦺魯	for grinding cams or camshafts
B24B  19/12  A	2	0	3C049	B24B  19/12	99	ư	Rocking type
B24B  19/12  C	2	0	3C049	B24B  19/12	180	Σ	NC control
B24B  19/12  E	2	0	3C049	B24B  19/12	35	з	Grindstone diameter compensation
B24B  19/12  G	2	0	3C049	B24B  19/12	30	®	Circumferential speed control
B24B  19/12  J	2	0	3C049	B24B  19/12	8	̥ฦ	Inner surface cam grinding
B24B  19/12  Z	2	0	3C049	B24B  19/12	208	¾	Others
B24B  19/14  \	1	1	3C049	B24B  19/14	154	ӥ֥졼ɡץڥ֥졼ɤޤΤΤ򸦺魯ΡΣ	for grinding turbine blades, propeller blades or the like [4]
B24B  19/16  \	1	1	3C049	B24B  19/16	295	üͭ빩ʪ㡥ˡڥˡȴ쥳ɿˡ򸦺魯Ρʿˤθ££ˡΣ	for grinding sharp-pointed workpieces, e.g. needles, pens, fish hooks, tweezers or record player styli (polishing of needles B24B 29/08) [4]
B24B  19/18  \	2	2	3C049	B24B  19/18	93	֡㡥ۡ򸦺魯	for grinding carding equipment, e.g. card-clothings
B24B  19/20  \	1	1	3C049	B24B  19/20	28	ȴ򸦺魯	for grinding dies
B24B  19/22  \	1	1	3C049	B24B  19/22	99	蘆٤°ʪΤκФ̤߷פˤħŤ	characterised by a special design with respect to properties of the material of non-metallic articles to be ground
B24B  19/24  \	2	2	3C049	B24B  19/24	74	ںࡤ㡥ȶ񡤤򸦺魯	of wood, e.g. furniture
B24B  19/26  \	1	1	3C049	B24B  19/26	31	̤̾ͭ빩ʪ㡥ưּΤΰХѡϿإåɡ򸦺魯ΡΣ	for grinding workpieces with arcuate surfaces, e.g. parts of car bodies, bumpers or magnetic recording heads [4]
B24B  19/26  A	1	0	3C049	B24B  19/26	151	إĥɤθ̸̾	Magnetic head arc surface grinding
B24B  19/26  Z	1	0	3C049	B24B  19/26	167	¾	Others
B24B  19/28  \	2	2	3C049	B24B  19/28	17	ɥ֥졼Υ塼ޤϥ饤˥󥰤򸦺魯ΡΣ	for grinding shoes or linings of drum brakes [4]
B24B  21/00  \	0	0	3C158	B24B  21/00	19	ޤϸӤѤ뵡ޤ֡ʷѥ٥ȸﵡ££ˡΤ°֡Σ	Machines or devices using grinding or polishing belts (portable belt-grinding machines B24B 23/06); Accessories therefor [4]
B24B  21/00  A	0	0	3C158	B24B  21/00	601	ͭüӡĥԥ󥰥ơݥפˤ븦	Polishing by polishing belts having ends or lapping tape
B24B  21/00  B	0	1	3C158	B24B  21/00	272	ǥΥĥԥ󥰥ơݥפˤʿ̸	Magnetic disk polishing to a plane surface by the lapping tape
B24B  21/00  C	0	1	3C158	B24B  21/00	122	إĥɤΥĥԥ󥰥ơݥפˤ븦̱̤ϣĤء	Magnetic head polishing by the lapping tape (cylinder surface B24B 21/00 D)
B24B  21/00  D	0	1	3C158	B24B  21/00	196	ĥԥ󥰥ơݥפˤ	Cylinder polishing by the lapping tape
B24B  21/00  Z	0	0	3C158	B24B  21/00	459	¾	Others
B24B  21/02  \	1	1	3C158	B24B  21/02	384	žоΤɽ̤򸦺魯	for grinding rotationally symmetrical surfaces
B24B  21/04  \	1	1	3C158	B24B  21/04	479	ʿ̤򸦺魯	for grinding plane surfaces
B24B  21/06  \	2	2	3C158	B24B  21/06	259	ʪФƸӤ򲡤Ĥ뤿θ¤줿̤ࡤ㡥̤򥹥ױư륷奦Τ褦ࡤͭΡʣ££ͥ	involving members with limited contact area pressing the belt against the work, e.g. shoes sweeping across the whole area to be ground (B24B 21/12 takes precedence)
B24B  21/08  \	3	3	3C158	B24B  21/08	255	塼٥	Pressure shoes; Backing belts
B24B  21/10  \	2	2	3C158	B24B  21/10	56	ࡤ㡥ӥѥĹϤäƸΤ򲡰ޤϻ٤ơ֥롤۸Τ褦ࡤͭ	involving a rigid member, e.g. pressure bar, table, pressing or supporting the belt over substantially its whole span
B24B  21/12  \	2	2	3C158	B24B  21/12	233	ʪ˸Ӥ򲡰륳󥿥ȥۥޤϥͭ	involving a contact wheel or roller pressing the belt against the work
B24B  21/14  \	3	3	3C158	B24B  21/14	147	󥿥ȥۥ롨󥿥ȥ顨٥ȻٻΣ	Contact wheels; Contact rollers; Belt supporting rolls [4]
B24B  21/16  \	1	1	3C158	B24B  21/16	651	¾̤η̤򸦺魯ΡΣ	for grinding other surfaces of particular shape [4]
B24B  21/18  \	1	1	3C158	B24B  21/18	26	°	Accessories
B24B  21/18  A	1	0	3C158	B24B  21/18	28		Cooling device
B24B  21/18  Z	1	0	3C158	B24B  21/18	286	¾	Others
B24B  21/20  \	2	2	3C158	B24B  21/20	129	ӤιϩޤĥϤޤĴΡΣ	for controlling or adjusting the tracking or the tension of the grinding belt [4]
B24B  21/22  \	2	2	3C158	B24B  21/22	153	Ӥ򤽤ΰưľѤ˱ưΡΣ	for producing a reciprocation of the grinding belt normal to its direction of movement [4]
B24B  23/00  \	0	0	3C158	B24B  23/00	13	Ѹﵡ㡥ưﵡΤ°֡ʣ££ͥ表֣££ˡΣ	Portable grinding machines, e.g. hand-guided; Accessories therefor (; dust extraction equipment B24B 55/10) [4]
B24B  23/00  A	0	0	3C158	B24B  23/00	122	ʸ֤Ĥ	having a soft polishing wheel
B24B  23/00  C	0	0	3C158	B24B  23/00	126	òӵ	Sound-proofing, exhaust handling
B24B  23/00  E	0	0	3C158	B24B  23/00	265	ήζư	Fluid drive
B24B  23/00  Z	0	0	3C158	B24B  23/00	635	¾㡥žĥ	Other, e.g. rotary shaft lock
B24B  23/02  \	1	1	3C158	B24B  23/02	1179	ž﹩ͭΡΤ°	with rotating grinding tools; Accessories therefor
B24B  23/03  \	2	2	3C158	B24B  23/03	163	ȹ礻ưˤư빩ˤΡΣ	the tool being driven in a combined movement [4]
B24B  23/04  \	1	1	3C158	B24B  23/04	416	ư﹩ͭΡΤ°֡Σ	with oscillating grinding tools; Accessories therefor [4]
B24B  23/06  \	1	1	3C158	B24B  23/06	231	ӤͭΡ㡥̵üӤͭΡΤ°֡Σ	with abrasive belts, e.g. with endless travelling belts; Accessories therefor [4]
B24B  23/08  \	1	1	3C158	B24B  23/08	230	ʪޤսΤʳ˸ꤵ褦߷פ줿Ѹﵡ㡥ήҤ򸦺魯	Portable grinding machines designed for fastening on workpieces or other parts of particular section, e.g. for grinding commutators
B24B  25/00  \	0	0	3C158	B24B  25/00	16	ǽθﵡ	Grinding machines of universal type
B24B  27/00  \	0	0	3C158	B24B  27/00	10	¾θﵡޤ	Other grinding machines or devices
B24B  27/00  A	0	0	3C158	B24B  27/00	756	ܥĥ	Grinding robot
B24B  27/00  E	0	0	3C158	B24B  27/00	119	ݥ븦̵֡ƻǤΤ΢ţ£	Rail grinding device (on the track R E 01 B 31/17)
B24B  27/00  G	0	0	3C158	B24B  27/00	49	߼	Hanging type grinding machine
B24B  27/00  J	0	0	3C158	B24B  27/00	62	èʿž	Upright type horizontal rotation grinding machine
B24B  27/00  L	0	0	3C158	B24B  27/00	450	ư	Movable grinding machine
B24B  27/00  M	0	1	3C158	B24B  27/00	92	̼ΩԸ̣֡££ͥ	Intra-pipe free running grinding machine (takes precedence over B 24 B 5/40.)
B24B  27/00  N	0	0	3C158	B24B  27/00	26	ȿžո	Grinding machine with an inverting unit
B24B  27/00  P	0	0	3C158	B24B  27/00	64	ĹΤΰʬ򸦺魯	Grinding a part of a long member
B24B  27/00  Z	0	0	3C158	B24B  27/00	170	¾	Others
B24B  27/02  \	1	1	3C158	B24B  27/02	91	带סΣ	Bench grinders [4]
B24B  27/027  \	1	1	3C158	B24B  27/027	43	ե쥭֥륷եȤͭΡΣ	having a flexible shaft [4]
B24B  27/033  \	1	1	3C158	B24B  27/033	41	Τɽ̤򸦺魯Ρ㡥ɽ̤Τݽޤϸ魯ΡΣ	for grinding a surface for cleaning purposes, e.g. for descaling or for grinding off flaws in the surface [4]
B24B  27/033  A	1	0	3C158	B24B  27/033	175	Ĥ긦	Flaw removing grinding machine with a flaw detector
B24B  27/033  Z	1	0	3C158	B24B  27/033	237	¾	Others
B24B  27/04  \	2	2	3C158	B24B  27/04	369	﹩ư˻ٻ줿ﵡޤϸ	Grinding machines or devices in which the grinding tool is supported on a swinging arm
B24B  27/06  \	1	1	3C158	B24B  27/06	29	Ѹﵡ	Grinders for cutting-off
B24B  27/06  D	1	0	3C158	B24B  27/06	1242	磻䥫ĥ	Wire cutting
B24B  27/06  E	1	1	3C158	B24B  27/06	252	磻ηϹ¤	Wire shape or structure
B24B  27/06  F	1	1	3C158	B24B  27/06	376	ݥϥ磻	Work or wire feed
B24B  27/06  Q	1	1	3C158	B24B  27/06	463	ι¤֤ħ	characterized by the roller structure or layout
B24B  27/06  R	1	1	3C158	B24B  27/06	223	磻ĥϤĴħ	characterized by wire tension adjustment or control
B24B  27/06  S	1	1	3C158	B24B  27/06	330	磻ԤħΡ㡥®桢꡼ư	characterized by wire running, e.g. speed control, reel drive
B24B  27/06  H	1	1	3C158	B24B  27/06	594	磻γ夵Ƥ	Abrasive grains bonded on the wire
B24B  27/06  J	1	0	3C158	B24B  27/06	709	ݿϼǵ	Outer circular knife type cutting machine
B24B  27/06  K	1	1	3C158	B24B  27/06	99	ݿϤ	Circular knife feed
B24B  27/06  L	1	1	3C158	B24B  27/06	34	ݿϤβž	Circular knife's number of revolutions control
B24B  27/06  M	1	1	3C158	B24B  27/06	1645	̩	Precision cutting
B24B  27/06  N	1	0	3C158	B24B  27/06	159	¿ϥХɥ	Multi-blade band saw
B24B  27/06  P	1	0	3C158	B24B  27/06	292	ϼǵ̣£Ļȡ	Inner knife type cutting machine (Refer to B 28 D.)
B24B  27/06  X	1	1	3C158	B24B  27/06	240	ղõǽߤ	Additional function provided
B24B  27/06  Z	1	0	3C158	B24B  27/06	137	¾	Others
B24B  27/08  \	2	2	3C158	B24B  27/08	75	ѡΣ	being portable [4]
B24B  29/00  \	0	0	3C158	B24B  29/00	22	ΤޤϱθޤѤޤѤʤǡޤʤ빩ˤ깩ʪɽ̤᤹뵡ޤ֡ʸӤѤ븦ޤϸ££ˡΣ	Machines or devices for polishing surfaces on work by means of tools made of soft or flexible material with or without the application of solid or liquid polishing agents (for grinding or polishing using belts B24B 21/00) [4]
B24B  29/00  B	0	0	3C158	B24B  29/00	93	եĥס֥饷ѤΡüθޤϥХȡ	using a flap or brush (end polishing or deburring. Refer to 9/00.)
B24B  29/00  C	0	1	3C158	B24B  29/00	145	ž	Rotary tool type
B24B  29/00  D	0	2	3C158	B24B  29/00	549	α߼̤Ǹ᤹	polishing with its circumferential surface
B24B  29/00  E	0	3	3C158	B24B  29/00	385	ʿ̤᤹	polishing a plane surface
B24B  29/00  F	0	3	3C158	B24B  29/00	299	ž̤᤹	polishing a surface of revolution
B24B  29/00  G	0	3	3C158	B24B  29/00	63	ư֤μΤ᤹	polishing a car body
B24B  29/00  H	0	2	3C158	B24B  29/00	247	ṳ̈Ǹ᤹	polishing with its end surface
B24B  29/00  J	0	3	3C158	B24B  29/00	200	ʿ̤᤹	polishing a plane surface
B24B  29/00  K	0	3	3C158	B24B  29/00	39	ž̤᤹	polishing a surface of revolution
B24B  29/00  L	0	1	3C158	B24B  29/00	69	ž	Non-rotary tool type
B24B  29/00  M	0	1	3C158	B24B  29/00	87	ζħͭ	characterized by supply of the polishing material
B24B  29/00  N	0	0	3C158	B24B  29/00	335	ۡݥ󥸾ιѤ	using a cloth or sponge type tool
B24B  29/00  Z	0	0	3C158	B24B  29/00	171	¾	Others
B24B  29/02  \	1	1	3C158	B24B  29/02	158	ιʪΤ߷פ줿ΡΣ	designed for particular workpieces [4]
B24B  29/04  \	2	2	3C158	B24B  29/04	125	žоΤʹʪ㡥ܡʪʪ߿ʪΤΤΡΣ	for rotationally symmetrical workpieces, e.g. ball-, cylinder- or cone-shaped workpieces [4]
B24B  29/06  \	2	2	3C158	B24B  29/06	75	ˤưͲ̷ͭĹܹʪΤΤΡΣ	for elongated workpieces having uniform cross-section in one main direction [4]
B24B  29/08  \	3	3	3C158	B24B  29/08	60	߷̤ͭΡ㡥塼֡磻䡼ˡΤΤΡΣ	the cross-section being circular, e.g. tubes, wires, needles [4]
B24B  29/10  \	2	2	3C158	B24B  29/10	1	ʪΤΤΡΣ	for table cutlery [4]
B24B  31/00  \	0	0	3C158	B24B  31/00	61	ʪޤγήưǽʾ֤Ƥ륿֥֡ޤϤ¾֤ˤäƹʪɽ̤ᤷޤϱФ뤿߷פ줿ޤ֡Τ°֡γ͵£ã	Machines or devices designed for polishing or abrading surfaces on work by means of tumbling apparatus or other apparatus in which the work or the abrasive material is loose; Accessories therefor (abrasive blasting machines B24C 3/26)
B24B  31/00  A	0	0	3C158	B24B  31/00	40	ޡݥ֥	Marble device
B24B  31/00  B	0	0	3C158	B24B  31/00	14	Х	Frozen barrel
B24B  31/00  C	0	0	3C158	B24B  31/00	268	γήưù	Machining by flow of abrasive grains
B24B  31/00  Z	0	0	3C158	B24B  31/00	397	¾	Others
B24B  31/02  \	1	1	3C158	B24B  31/02	13	žХͭ	involving rotary barrels
B24B  31/02  A	1	0	3C158	B24B  31/02	78	м	Tilted shaft type
B24B  31/02  B	1	0	3C158	B24B  31/02	101	è	Upright type
B24B  31/02  Z	1	0	3C158	B24B  31/02	573	¾	Others
B24B  31/023  \	2	2	3C158	B24B  31/023	50	вǽʼͭΡΣ	with tiltable axis [4]
B24B  31/027  \	2	2	3C158	B24B  31/027	24	ɲưưԤΡΣ	with additional oscillating movement [4]
B24B  31/03  \	2	2	3C158	B24B  31/03	14	Ϣ³Ԥ빩ʪΤΤΡΣ	the workpieces being continuously-travelling [4]
B24B  31/033  \	2	2	3C158	B24B  31/033	210	ʿԼͭžޤϥ֥󥰥ɥĤͭΡΣ	having several rotating or tumbling drums with parallel axes [4]
B24B  31/037  \	2	2	3C158	B24B  31/037	33	ʿԼͭžޤϥ֥󥰥ɥĤͭΡΣ	having several rotating or tumbling drums with non-parallel axes [4]
B24B  31/05  \	1	1	3C158	B24B  31/05	72	٥٥ȤȤƷ줿ƴͭΡΣ	involving a container formed as a conveyor belt [4]
B24B  31/06  \	1	1	3C158	B24B  31/06	172	ưޤϿưƴͭ	involving oscillating or vibrating containers
B24B  31/067  \	2	2	3C158	B24B  31/067	90	ľκĹ˷줿ܥͭΡΣ	involving a bowl formed as a straight trough [4]
B24B  31/073  \	2	2	3C158	B24B  31/073	192	󥰾ޤܥͭΡΣ	involving a bowl being ring- or spiral-shaped [4]
B24B  31/10  \	1	1	3C158	B24B  31/10	5	ʪ򥿥֥󥰤¾֤ͭΡΣ	involving other means for tumbling of work [4]
B24B  31/10  A	1	0	3C158	B24B  31/10	41	쥷ץư	Reciprocal motion
B24B  31/10  B	1	0	3C158	B24B  31/10	32	Ķȿưä	Ultrasonic vibration applied
B24B  31/10  Z	1	0	3C158	B24B  31/10	151	¾	Others
B24B  31/104  \	2	2	3C158	B24B  31/104	106	ʴΥΰ褬Ϥˤ褦ˤžܥͭΡΣ	involving a rotating bowl, in which a ring zone of abrasive powder is formed by centrifugal force [4]
B24B  31/108  \	2	2	3C158	B24B  31/108	118	ʬ줿ܥͭΤǡΰ㡥ɡŻߤ¾ʬư㡥žΡΣ	involving a sectioned bowl, one part of which, e.g. its wall, is stationary and the other part of which is moved, e.g. rotated [4]
B24B  31/112  \	2	2	3C158	B24B  31/112	275	Ū˷礵줿γѤϤˤ깩ʪŪ˰ưΡΣ	using magnetically consolidated grinding powder, moved relatively to the workpiece under the influence of pressure [4]
B24B  31/116  \	2	2	3C158	B24B  31/116	17	ѷ븦拾ѥɤѤϤˤ깩ʪŪ˰ưΡΣ	using plastically deformable grinding compound, moved relatively to the workpiece under the influence of pressure [4]
B24B  31/12  \	1	1	3C158	B24B  31/12	8	°֡ݸ֤ޤϰ֡롼ף££ޤ뵡ΤäŬФޤϾò֡Σ	Accessories; Protective equipment or safety devices; Installations for exhaustion of dust or for sound absorption specially adapted for machines covered by group B24B 31/00 [4]
B24B  31/12  A	1	0	3C158	B24B  31/12	116	ݥǥζӽ	Work/medium supply or removal
B24B  31/12  B	1	0	3C158	B24B  31/12	119	ݥݻ	Work retaining means
B24B  31/12  Z	1	0	3C158	B24B  31/12	126	¾	Others
B24B  31/14  \	2	2	3C158	B24B  31/14	314	֥֤Ѥ뤿ä˺줿ࡤ㡥	Abrading-bodies specially designed for tumbling apparatus, e.g. abrading-balls
B24B  31/16  \	2	2	3C158	B24B  31/16	203	ȽλʪΤʬΥ֡Σ	Means for separating the workpiece from the abrasive medium at the end of operation [4]
B24B  33/00  \	0	0	3C158	B24B  33/00	91	ۡ˥󥰵ޤ֡Τ°	Honing machines or devices; Accessories therefor
B24B  33/02  \	1	1	3C158	B24B  33/02	561	žɽ̡㡥̤ޤϱ߿̡ù뤿줿	designed for working internal surfaces of revolution, e.g. of cylindrical or conical shapes
B24B  33/04  \	1	1	3C158	B24B  33/04	35	žɽ̤ù뤿߷פ줿	designed for working external surfaces of revolution
B24B  33/05  \	1	1	3C158	B24B  33/05	47	¡㡥ƿȤι¡ù뤿߷פ줿	designed for working grooves, e.g. in gun barrels
B24B  33/055  \	1	1	3C158	B24B  33/055	13	ʿ̤ù뤿߷פ줿ΡΣ	designed for working plane surfaces [4]
B24B  33/06  \	1	1	3C158	B24B  33/06	266	ޤϷ¬֤Ĥ	with controlling or gauging equipment
B24B  33/08  \	1	1	3C158	B24B  33/08	508	ۡ˥󥰹	Honing tools
B24B  33/10  \	1	1	3C158	B24B  33/10	65	°	Accessories
B24B  35/00  \	0	0	3C158	B24B  35/00	480	ʪɽ̤Ķž塤ʤ⤤ưǱư븦Τˤ깩ʪɽ̤ž夹뵡ޤ֡ʣ££ͥ	Machines or devices designed for superfinishing surfaces on work, i.e. by means of abrading blocks reciprocating with high frequency (B24B 3/00 takes precedence)
B24B  37/00  \	0	0	3C158	B24B  37/00	38	åԥ󥰵ޤ֡°֡ʣ££ͥˡΣ	Lapping machines or devices; accessories therefor (B24B3/00 takes precedence) [1, 2012.01]
B24B  37/00  D	0	0	3C158	B24B  37/00	319	Ѥåԥ	Magnetic lapping
B24B  37/00  E	0	0	3C158	B24B  37/00	163	ưͿåԥ	Vibration lapping
B24B  37/00  G	0	0	3C158	B24B  37/00	163	Υåԥ󥰡ʸϩǥ磻ˤưƴɤ̤᤹Τϣ££á	Hole lapping (moving a polishing agent reciprocally in the tube by wires, etc. to polish the inside thereof B24B5/40C)
B24B  37/00  H	0	0	3C158	B24B  37/00	6813	åγաγϢϣãããˣãʣ	Lapping abrasive grains or working liquid (related to abrasive grains C09C 1/68, C09K 3/14, C08J 5/14)
B24B  37/00  K	0	0	3C158	B24B  37/00	1298	դζħΡ㡥פ⤷ϥѥåɤιѡή̤䶡֤ޤϸդβùؤݻʸդβϣ££	characterized by supply of the polishing liquid, e.g. utilising the hole on the surface plate or pad, control of the flow rate or supply time, retaining the polishing liquid on the machined part (polishing liquid temperature control B24B 37/015)
B24B  37/00  Z	0	0	3C158	B24B  37/00	933	¾	Others
B24B  37/005  \	1	1	3C158	B24B  37/005	5	åԥ󥰵ޤ֤ʡΣ	Control means for lapping machines or devices [2012.01]
B24B  37/005  A	1	0	3C158	B24B  37/005	1232	åԥ󥰤ˤ븦ᰵħͭ	characterised by control of polishing pressure on lapping
B24B  37/005  B	1	0	3C158	B24B  37/005	838	ʿ̥åԥ󥰤ˤùˡ岼״ַ	worked dimensions on plane lapping; control of a gap between the upper and lower surface plates
B24B  37/005  Z	1	0	3C158	B24B  37/005	1565	¾	Others
B24B  37/013  \	2	2	3C158	B24B  37/013	1321	åԥ󥰤δλΤ֤ޤϼʡΣ	Devices or means for detecting lapping completion [2012.01]
B24B  37/015  \	2	2	3C158	B24B  37/015	508	ٴΣ	Temperature control [2012.01]
B24B  37/02  \	1	1	3C158	B24B  37/02	230	žɽ̤ù뤿߷פ줿ΡΣ	designed for working surfaces of revolution [1, 2012.01]
B24B  37/025  \	2	2	3C158	B24B  37/025	257	̤ù뤿߷פ줿ΡΣ	designed for working spherical surfaces [2012.01]
B24B  37/04  \	1	1	3C158	B24B  37/04	1012	ʿ̤ù뤿߷פ줿ΡΣ	designed for working plane surfaces [1, 2012.01]
B24B  37/07  \	2	2	3C158	B24B  37/07	249	ʪޤϥå׹ưħΤΡΣ	characterised by the movement of the work or lapping tool [2012.01]
B24B  37/08  \	3	3	3C158	B24B  37/08	1048	ξ̥åԥ󥰤ΤΤΡΣ	for double side lapping [2012.01]
B24B  37/10  \	3	3	3C158	B24B  37/10	1285	̥åԥ󥰤ΤΤΡΣ	for single side lapping [2012.01]
B24B  37/11  \	1	1	3C158	B24B  37/11	221	å׹Σ	Lapping tools [2012.01]
B24B  37/12  \	2	2	3C158	B24B  37/12	2	ʿ̤ù뤿ΥåסΣ	Lapping plates for working plane surfaces [2012.01]
B24B  37/12  A	2	0	3C158	B24B  37/12	106	깽¤ħ	characterised by hole structure
B24B  37/12  B	2	0	3C158	B24B  37/12	89	ѷɻߤŪȤ	for preventing deformation
B24B  37/12  C	2	0	3C158	B24B  37/12	235	ɽ̤Ǹ᤹	polishing on the surface plates
B24B  37/12  D	2	0	3C158	B24B  37/12	545	ѥåɤޤϸۤŽդ	attaching a pad or a polishing cloth
B24B  37/12  Z	2	0	3C158	B24B  37/12	810	¾	Others
B24B  37/14  \	3	3	3C158	B24B  37/14	147	åפκޤħΤΡΣ	characterised by the composition or properties of the plate materials [2012.01]
B24B  37/16  \	3	3	3C158	B24B  37/16	221	åפɽ̤ηħΤΡ㡥ڤħΤΡΣ	characterised by the shape of the lapping plate surface, e.g. grooved [2012.01]
B24B  37/20  \	2	2	3C158	B24B  37/20	2054	ʿ̤ù뤿Υåԥ󥰥ѥåɡΣ	Lapping pads for working plane surfaces [2012.01]
B24B  37/22  \	3	3	3C158	B24B  37/22	699	ع¤ħΤΡΣ	characterised by a multi-layered structure [2012.01]
B24B  37/24  \	3	3	3C158	B24B  37/24	20	ѥåɤκޤħΤΡΣ	characterised by the composition or properties of the pad materials[2012.01]
B24B  37/24  A	3	0	3C158	B24B  37/24	326		Elastic bodies
B24B  37/24  B	3	1	3C158	B24B  37/24	686		Resin
B24B  37/24  C	3	2	3C158	B24B  37/24	1474	ݥꥦ쥿󡨥ݥꥨƥ롨	Polyurethane, polyester, rubber
B24B  37/24  D	3	1	3C158	B24B  37/24	173		Cloth
B24B  37/24  E	3	2	3C158	B24B  37/24	360	Կ	Non-woven fabric
B24B  37/24  F	3	1	3C158	B24B  37/24	68		Raised cloth
B24B  37/24  Z	3	0	3C158	B24B  37/24	642	¾	Others
B24B  37/26  \	3	3	3C158	B24B  37/26	835	åԥ󥰥ѥåɤɽ̤η㡥ڤħΤΡΣ	characterised by the shape of the lapping pad surface, e.g. grooved [2012.01]
B24B  37/27  \	1	1	3C158	B24B  37/27	72	åԥ󥰥ꥢΣ	Lapping carriers [2012.01]
B24B  37/28  \	2	2	3C158	B24B  37/28	753	ʿ̤ξ̥åԥ󥰤ΤΤΡΣ	for double side lapping of plane surfaces [2012.01]
B24B  37/30  \	2	2	3C158	B24B  37/30	11	ʿ̤̥åԥ󥰤ΤΤΡΣ	for single side lapping of plane surfaces [2012.01]
B24B  37/30  A	2	0	3C158	B24B  37/30	619	ˤΡ㡥ޤϵ	by adsorption, e.g. by vacuum or suction cups
B24B  37/30  B	2	0	3C158	B24B  37/30	480	ޡåˤ	Adhesives; by wax, etc.
B24B  37/30  C	2	0	3C158	B24B  37/30	568	ݻȤħ	characterised by retaining sheets
B24B  37/30  D	2	1	3C158	B24B  37/30	145	ع¤ħ	characterised by a multi-layered structure
B24B  37/30  E	2	0	3C158	B24B  37/30	927	Ϳ¤ħ	characterised by pressure-supplying structure
B24B  37/30  Z	2	0	3C158	B24B  37/30	1673	¾	Others
B24B  37/32  \	3	3	3C158	B24B  37/32	6	ơʥ󥰡Σ	Retaining rings [2012.01]
B24B  37/32  A	3	0	3C158	B24B  37/32	209	岼ư¤ħ	characterised by vertically movable structure
B24B  37/32  Z	3	0	3C158	B24B  37/32	440	¾	Others
B24B  37/34  \	1	1	3C158	B24B  37/34	329	°ʡΣ	Accessories [2012.01]
B24B  39/00  \	0	0	3C158	B24B  39/00	217	Х˥å󥰵ޤ֡ʤʪɽ̤ܤ벡ͭ뵡ޤ֡Τ°֡ʣ££ͥ	Burnishing machines or devices, i.e. requiring pressure members for compacting the surface zone; Accessories therefor ()
B24B  39/02  \	1	1	3C158	B24B  39/02	7	ž̤ù뤿߷פ줿	designed for working internal surfaces of revolution
B24B  39/02  A	1	0	3C158	B24B  39/02	36	ꤵʤܡݥ̲ᤵ	Non-fastened ball passed through
B24B  39/02  Z	1	0	3C158	B24B  39/02	212	¾	Others
B24B  39/04  \	1	1	3C158	B24B  39/04	12	ž̤ù뤿߷פ줿	designed for working external surfaces of revolution
B24B  39/04  A	1	0	3C158	B24B  39/04	167	ä˥󥯥եȤβùŬ	particular suitable for crank shaft machining
B24B  39/04  Z	1	0	3C158	B24B  39/04	190	¾	Others
B24B  39/06  \	1	1	3C158	B24B  39/06	98	ʿ̤ù뤿߷פ줿ΡΣ	designed for working plane surfaces [4]
B24B  41/00  \	0	0	3C034	B24B  41/00	195	ե졼ࡤ٥åɡ桤缴桤ʤɤθﵡޤ֤ιʬ	Component parts of grinding machines or devices, such as frames, beds, carriages or headstocks
B24B  41/02  \	1	1	3C034	B24B  41/02	225	ե졼ࡨ٥åɡ	Frames; Beds; Carriages
B24B  41/04  \	1	1	3C034	B24B  41/04	1215	缴桨缴˴ؤħ	Headstocks; Working-spindles; Features relating thereto
B24B  41/047  \	2	2	3C034	B24B  41/047	311	ʿ̤ù븦إåɡΣ	Grinding heads for working on plane surfaces [4]
B24B  41/053  \	3	3	3C034	B24B  41/053	40	饹򸦺ޤϸ᤹ΡΣ	for grinding or polishing glass [4]
B24B  41/06  \	1	1	3C034	B24B  41/06	17	ʪٻ㡥Ĵǽʻٻʣ££ͥˡΣ	Work supports, e.g. adjustable supports (B24B 37/27 takes precedence) [1, 2012.01]
B24B  41/06  A	1	0	3C034	B24B  41/06	1106	ݥùΰ˶ޤӽΡùꡤȥСݥβùαưñ˲ùΰ賰ˤޤǵڤ֤ΤϽ	Work supplied to or removed from the machining area,  (excluding those with motions such as machining feed, traverse, etc. that simply go out of the machining area)
B24B  41/06  B	1	1	3C034	B24B  41/06	398	Ϣ³˸ù	Grinding during continuous transfer
B24B  41/06  C	1	0	3C034	B24B  41/06	349	礿ٻʳΤΤǤäƿߤΤ˥Ū˻ٻ	Other than the main supporting instrument, supporting the work supplementarily for preventing vibration
B24B  41/06  J	1	0	3C034	B24B  41/06	667	̤ù뤿ΤΡʣ££äͥ	for machining the outer surface of a cylinder (B24B41/06A to B24B41/06C take precedence)
B24B  41/06  K	1	0	3C034	B24B  41/06	127	̤ù뤿ΤΡʣ££äͥ	for machining the inner surface of a cylinder (B24B41/06A to B24B41/06C take precedence)
B24B  41/06  L	1	0	3C034	B24B  41/06	2159	ṳ̈ޤʿ̤ù뤿ΤΡʣ££äͥ	for machining a plane including an end surface (B24B41/06A to B24B41/06C take precedence.)
B24B  41/06  Z	1	0	3C034	B24B  41/06	1350	¾	Others
B24B  45/00  \	0	0	3C034	B24B  45/00	11	žм֤ȤĤ	Means for securing grinding wheels on rotary arbors
B24B  45/00  A	0	0	3C034	B24B  45/00	472	Фμư򴹤ޤ	Tool replacement supplementary instrument (including automatic replacement of the grindstone)
B24B  45/00  B	0	0	3C034	B24B  45/00	260	м֤ΥХ󥹼̴Ϣǣͣƣƣ	Grinding wheel balancing (related G 01 M 1/16, F 16 F 15/32)
B24B  45/00  C	0	0	3C034	B24B  45/00	165	ʣθΤդ	Multiple grinders attached
B24B  45/00  Z	0	0	3C034	B24B  45/00	1090	¾	Others
B24B  47/00  \	0	0	3C034	B24B  47/00	46	ﵡޤ֤ζư֤ޤư֡Τ	Drives or gearings for grinding machines or devices; Equipment therefor
B24B  47/02  \	1	1	3C034	B24B  47/02	301	ޤϥơ֥˱ưԤ碌	for performing a reciprocating movement of carriages or work-tables
B24B  47/04  \	2	2	3C034	B24B  47/04	87	ŪưΤߤˤ	by mechanical gearing only
B24B  47/06  \	2	2	3C034	B24B  47/06	47	հޤϵΰˤ	by liquid or gas pressure only
B24B  47/08  \	2	2	3C034	B24B  47/08	13	ή֤Ȥ߹礻Ūưˤ	by mechanical gearing combined with fluid systems
B24B  47/10  \	1	1	3C034	B24B  47/10	610	м֤ޤϹʪݻùԥɥžޤϱư뤿Τ	for rotating or reciprocating working-spindles carrying grinding wheels or workpieces
B24B  47/12  \	2	2	3C034	B24B  47/12	441	ŪưޤŵŪưˤΡʣ££ͥ	by mechanical gearing or electric power (B24B 47/16 takes precedence)
B24B  47/14  \	2	2	3C034	B24B  47/14	90	հޤϵΰˤΡʣ££ͥ	by liquid or gas pressure (B24B 47/16 takes precedence)
B24B  47/16  \	2	2	3C034	B24B  47/16	88	ưΡ㡥δ֤˼缴βžž	performing a reciprocating movement, e.g. during which the sense of rotation of the working-spindle is reversed
B24B  47/18  \	2	2	3C034	B24B  47/18	95	м֤פб®٤мž	for rotating the spindle at a speed adaptable to wear of the grinding wheel
B24B  47/20  \	1	1	3C034	B24B  47/20	800	걿ư˴ؤ	relating to feed movement
B24B  47/22  \	1	1	3C034	B24B  47/22	775	ﳫϻˤм֤ޤϹʪΰ֤Τ椹뤿	Equipment for exact control of the position of the grinding tool or work at the start of the grinding operation
B24B  47/25  \	1	1	3C034	B24B  47/25	98	ɥå󥰤ˤм֤פ뤿ΤΡΣ	for compensating grinding wheel abrasion resulting from dressing [4]
B24B  47/26  \	1	1	3C034	B24B  47/26	83	°֡㡥ȥåѡ	Accessories, e.g. stops
B24B  47/28  \	1	1	3C034	B24B  47/28	6	Хåå	Equipment for preventing backlash
B24B  49/00  \	0	0	3C034	B24B  49/00	851	﹩ޤϹʪ걿ư椹뤿η¬֡ؼޤϷ¬֤ι㡥ﳫϤؼΡʣ££££ͥ表¾ιˤѤΤϣ£ѣ£ѣͥˡΣ	Measuring or gauging equipment for controlling the feed movement of the grinding tool or work; arrangements of indicating or measuring equipment, e.g. for indicating the start of the grinding operation (B24B 33/06, B24B37/005 take precedence; if applicable to other machine tools, B23Q 15/00 to B23Q 17/00 take precedence) [1, 2012.01]
B24B  49/02  \	1	1	3C034	B24B  49/02	24	Ϣ³ŪޤϴַŪ¬ꤵ빩ʪμˡɬˡ˱椹Ρʣ££ͥˡΣ	according to the instantaneous size and required size of the workpiece acted upon, the measuring or gauging being continuous or intermittent (B24B 49/12 takes precedence) [4]
B24B  49/02  A	1	0	3C034	B24B  49/02	424	¤¬ꤹ	measuring the outside diameter of a cylinder
B24B  49/02  B	1	0	3C034	B24B  49/02	146	¤¬ꤹ	measuring the inside diameter of a cylinder
B24B  49/02  Z	1	0	3C034	B24B  49/02	746	¾	Others
B24B  49/03  \	2	2	3C034	B24B  49/03	2	˸蘆줿ʪκǽˡ˱椹ΡΣ	according to the final size of the previously ground workpiece [4]
B24B  49/03  A	2	0	3C034	B24B  49/03	22	¤¬ꤹ	measuring the outside diameter of a cylinder
B24B  49/03  B	2	0	3C034	B24B  49/03	8	¤¬ꤹ	measuring the inside diameter of a cylinder
B24B  49/03  Z	2	0	3C034	B24B  49/03	136	¾	Others
B24B  49/04  \	2	2	3C034	B24B  49/04	19	˸֤ǹʪ¬ꤹΡΣ	involving measurement of the workpiece at the place of grinding during grinding operation [4]
B24B  49/04  A	2	0	3C034	B24B  49/04	263	¤¬ꤹ	measuring the outside diameter of a cylinder
B24B  49/04  B	2	0	3C034	B24B  49/04	65	¤¬ꤹ	measuring the inside diameter of a cylinder
B24B  49/04  Z	2	0	3C034	B24B  49/04	800	¾	Others
B24B  49/05  \	3	3	3C034	B24B  49/05	38	˵ù줿ǽιʪ¬ȡǽιʪƱ˲ù뤿̤ιʪ¬ޤΡΣ	including the measurement of a first workpiece already machined and of another workpiece being machined and to be matched with the first one [4]
B24B  49/06  \	2	2	3C034	B24B  49/06	61	ʪɸץ饰󥰥ޤϤƱͤʥӤ	requiring comparison of the workpiece with standard gauging plugs, rings or the like
B24B  49/08  \	1	1	3C034	B24B  49/08	169	Τޤϵ֤ͭ	involving liquid or pneumatic means
B24B  49/10  \	1	1	3C034	B24B  49/10	1981	ŵŪ֤ͭΡʣ££££ͥ	involving electrical means (B24B 49/02, B24B 49/08 take precedence)
B24B  49/12  \	1	1	3C034	B24B  49/12	2382	Ū֤ͭ	involving optical means
B24B  49/14  \	1	1	3C034	B24B  49/14	413	β٤θ	taking regard of the temperature during grinding
B24B  49/16  \	1	1	3C034	B24B  49/16	1411	٤θ	taking regard of the load
B24B  49/18  \	1	1	3C034	B24B  49/18	543	ɥå󥰹¸ߤθ	taking regard of the presence of dressing tools
B24B  51/00  \	0	0	3C034	B24B  51/00	352	ʪθùˤϢγƹưŪ椹뤿	Arrangements for automatic control of a series of individual steps in grinding a workpiece
B24B  53/00  \	0	0	3C047	B24B  53/00	22	̤Υɥå󥰤ޤﲽΤ֤ޤϼʡΣ	Devices or means for dressing or conditioning abrasive surfaces [4]
B24B  53/00  A	0	0	3C047	B24B  53/00	833	سΤǤϤʤ桨	Control not for forming the contour; detection not therefor
B24B  53/00  B	0	0	3C047	B24B  53/00	152	̺Υᥫ˥ħȤɥåˡ	Dressing method characterized by the abrasive surface regeneration mechanism
B24B  53/00  C	0	0	3C047	B24B  53/00	295	ɡã£ФΤΥɥå󥰡ȥ롼	Diamond; dressing for CBN grindstone; truing therefor
B24B  53/00  D	0	0	3C047	B24B  53/00	601	ŵͥ륮㡥졼ľܺѤɥå󥰡ʣù£ȣ	Dressing directly applying the electrical energy, e.g. lasers (combined machining B23H 5/00)
B24B  53/00  J	0	0	3C047	B24B  53/00	257	θ﹩ΤΥɥå󥰡ȥ롼	Dressing for a particular grinding tool; truing therefor
B24B  53/00  K	0	1	3C047	B24B  53/00	330		Cutting grindstone
B24B  53/00  L	0	1	3C047	B24B  53/00	58	ۡ˥󥰹	Honing tool
B24B  53/00  M	0	1	3C047	B24B  53/00	48	֥å󥰥	Brushing roll
B24B  53/00  Z	0	0	3C047	B24B  53/00	288	¾	Others
B24B  53/007  \	1	1	3C047	B24B  53/007	209	м֤Σ	Cleaning of grinding wheels [4]
B24B  53/013  \	1	1	3C047	B24B  53/013	61	ȤƤͷΥγ򶡵뤹ΡΣ	Application of loose grinding agent as auxiliary tool during truing operation [4]
B24B  53/017  \	1	1	3C047	B24B  53/017	3	å׹Υɥå󥰡ޤϤ¾ĴΤ֤ȼʡΣ	Devices or means for dressing, cleaning or otherwise conditioning lapping tools [2012.01]
B24B  53/017  A	1	0	3C047	B24B  53/017	701	å׹Υɥå󥰤Τι	Tools for dressing lapping tools
B24B  53/017  Z	1	0	3C047	B24B  53/017	1479	¾	Others
B24B  53/02  \	1	1	3C047	B24B  53/02	726	ʿ̤ʤ﹩ΤΡʣ££ͥˡΣ	of plane surfaces on abrasive tools (B24B 53/017 takes precedence) [1, 2012.01]
B24B  53/04  \	1	1	3C047	B24B  53/04	183	ṩޤм֤α̤ޤϱ߿̤ΤΤΡʣ££ͥˡΣ	of cylindrical or conical surfaces on abrasive tools or wheels  (B24B 53/017 takes precedence) [4, 2012.01]
B24B  53/047  \	2	2	3C047	B24B  53/047	215	ĤޤİʾΥɤΡΣ	equipped with one or more diamonds [4]
B24B  53/053  \	2	2	3C047	B24B  53/053	320	꡼ɥåѤΡΣ	using a rotary dressing tool [4]
B24B  53/06  \	1	1	3C047	B24B  53/06	2	м֤Τ	of profiled abrasive wheels
B24B  53/06  A	1	0	3C047	B24B  53/06	168	ɥå󥰱ư뤳Ȥˤ̾سԤ	Arc contour formed by a swing motion of a dresser
B24B  53/06  B	1	0	3C047	B24B  53/06	44	ɥåηϱưפȤϰۤʤسԷФ	forming the grindstone to a contour shape that is different from the dresser shape or motion path
B24B  53/06  Z	1	0	3C047	B24B  53/06	193	¾	Others
B24B  53/065  \	2	2	3C047	B24B  53/065	29	ľʳ㡥饦˥󥰡ͭΡʣ££ͥˡΣ	having other than straight profiles, e.g. crowned (B24B 53/07 takes precedence) [4]
B24B  53/07  \	2	2	3C047	B24B  53/07	100	٤Ūʷͭ㡥֥å꡼ɥåˤΡΣ	by means of forming tools having a shape complementary to that to be produced, e.g. blocks, profile rolls [4]
B24B  53/075  \	2	2	3C047	B24B  53/075	278	¾سԤͭ빩ʪ㡥֡ץ饤󥷥եȡͤࡤΤΤΡʣ££ͥˡΣ	for workpieces having a grooved profile, e.g. gears, splined shafts, threads, worms (B24B 53/07 takes precedence) [4]
B24B  53/08  \	2	2	3C047	B24B  53/08	4	ݻʡ㡥Х󡤥ƥ֥졼ȡѥơפޤΤΡˤ椵	controlled by information means, e.g. patterns, templets, punched tapes or the like
B24B  53/08  A	2	0	3C047	B24B  53/08	149	ˤسԤ	forming the grindstone contour by numerical control
B24B  53/08  B	2	0	3C047	B24B  53/08	160	襤ˤسԤ	forming the grindstone contour by profiling
B24B  53/08  Z	2	0	3C047	B24B  53/08	12	¾	Others
B24B  53/085  \	3	3	3C047	B24B  53/085	83	¾سԤͭ빩ʪ㡥֡ץ饤󥷥եȡͤࡤΤΤΡʣ££ͥˡΣ	for workpieces having a grooved profile, e.g. gears, splined shafts, threads, worms (B24B 53/09 takes precedence) [4]
B24B  53/09  \	3	3	3C047	B24B  53/09	1	ѥ󥿥յȤƷ줿ưãǤͭΡΣ	having transfer elements formed as pantograph mechanism [4]
B24B  53/095  \	1	1	3C047	B24B  53/095	56	ɥå󥰺ѤޤϽΣ	Cooling or lubricating during dressing operation [4]
B24B  53/10  \	1	1	3C047	B24B  53/10	47	γ򥳡Ȥ줿΢बưΡ٥ȤξΣ	of travelling flexible backings coated with abrasives; Cleaning of abrasive belts [4]
B24B  53/12  \	1	1	3C047	B24B  53/12	63	ɥå󥰹񡨤ΤΥۥΣ	Dressing tools; Holders therefor [4]
B24B  53/12  A	1	0	3C047	B24B  53/12	112	ʿФν	Flat grindstone correction instrument
B24B  53/12  Z	1	0	3C047	B24B  53/12	1156	¾	Others
B24B  53/14  \	2	2	3C047	B24B  53/14	338	žޤϥåɥå󥰹񡨤ΤΥۥΣ	Dressing tools equipped with rotary rollers or cutters; Holders therefor [4]
B24B  55/00  \	0	0	3C047	B24B  55/00	572	ޤϸᵡΰ֡ޤϵʤɤư˰ݻ뤿˸ޤϸᵡ˼դ줿°	Safety devices for grinding or polishing machines; Accessories fitted to grinding or polishing machines for keeping tools or parts of the machine in good working condition
B24B  55/02  \	1	1	3C047	B24B  55/02	41	̤ѤΤ֡㡥ѱդζΤ֡м֤Ȥ߹ޤ줿Σ£ġˡΣ	Equipment for cooling the grinding surfaces, e.g. devices for feeding coolant (incorporated in grinding wheels B24D) [4]
B24B  55/02  A	1	0	3C047	B24B  55/02	367	ץפΤ	Cylinder grinding machine type
B24B  55/02  B	1	0	3C047	B24B  55/02	508	ʿ̸ץפΤ	Flat surface grinding machine type
B24B  55/02  C	1	0	3C047	B24B  55/02	90	奰饤פΤ	Desktop grinder type
B24B  55/02  D	1	0	3C047	B24B  55/02	367	ѤޤѤΤ	Handy or cutting grindstone type
B24B  55/02  Z	1	0	3C047	B24B  55/02	591	¾	Others
B24B  55/03  \	2	2	3C047	B24B  55/03	382	ѱդζޤϾΤΤΤǤäơĤδ֤Ȥ߷פ줿ΡΣ	designed as a complete equipment for feeding or clarifying coolant [4]
B24B  55/04  \	1	1	3C047	B24B  55/04	5	мѤɸС	Protective covers for the grinding wheel
B24B  55/04  A	1	0	3C047	B24B  55/04	187	ץפθפΤмɸС	Grinding wheel protection cover for the cylinder grinding machine type
B24B  55/04  Z	1	0	3C047	B24B  55/04	367	¾	Others
B24B  55/05  \	2	2	3C047	B24B  55/05	315	ѸﵡѤä߷פ줿ΡΣ	specially designed for portable grinding machines [4]
B24B  55/06  \	1	1	3C047	B24B  55/06	1562	ޤϸᵡν֡ʣ££ͥ	Dust extraction equipment on grinding or polishing machines (B24B 31/12 takes precedence)
B24B  55/08  \	2	2	3C047	B24B  55/08	8	٥ȸﵡѤä߷פ줿ΡΣ	specially designed for belt grinding machines [4]
B24B  55/08  A	2	0	3C047	B24B  55/08	105	٥ȸﵡνСɿ	Dust collection or dust-proofing device for the belt grinding machine
B24B  55/08  B	2	0	3C047	B24B  55/08	44	٥դʮ͡	Belt washing liquid spray or collection
B24B  55/08  Z	2	0	3C047	B24B  55/08	73	¾	Others
B24B  55/10  \	2	2	3C047	B24B  55/10	452	Ѹﵡ㡥ȵΤä߷פ줿ΡΣ	specially designed for portable grinding machines, e.g. hand-guided [4]
B24B  55/12  \	1	1	3C047	B24B  55/12	355	ޤѸΥߥȤӽ뤿֡ޤϸᡤ㡥°СɤޤΤΤθޤϸᡤˤäμޤϺΤ֡Σ	Devices for exhausting mist of oil or coolant; Devices for collecting or recovering materials resulting from grinding or polishing, e.g. of precious metals, precious stones, diamonds or the like [4]
B24B  57/00  \	0	0	3C047	B24B  57/00	356	ޤϥåԥ󥰺ޤζ롤ŬѡʬޤϺΤ֡γ᤭դ֣£ã£ãˡΣ	Devices for feeding, applying, grading or recovering grinding, polishing or lapping agents (for abrasive blasting B24C 1/00, B24C 7/00) [4]
B24B  57/02  \	1	1	3C047	B24B  57/02	1694	ήξʮ̸ʴޤϱθޤϥå׺ޤ򶡵뤹ΡΣ	for feeding of fluid, sprayed, pulverised, or liquefied grinding, polishing or lapping agents [4]
B24B  57/04  \	1	1	3C047	B24B  57/04	57	ξޤϥå׺ޤ򶡵뤹ΡΣ	for feeding of solid grinding, polishing or lapping agents [4]
