B27L   1/00  \	0	0	2B241	B27L   1/00	141	ڤޤϴμνޤϻפνʲŪˤν£̣ˡΤεΣ	Debarking or removing vestiges of branches from trees or logs (debarking by chemical treatment B27L 3/00); Machines therefor [2]
B27L   1/00 501 \	1	1	2B241	B27L   1/00	24	̲ÿ֡	Pre-treatment (water adding device 1/02 501)
B27L   1/00 502 \	1	1	2B241	B27L   1/00	15	žžѤ	Non-rotary tool applied to a rotating tree trunk
B27L   1/00 503 \	2	2	2B241	B27L   1/00	6		Tool
B27L   1/02  \	1	1	2B241	B27L   1/02	8	ߤ໤ˤΡʣ£̣ͥˡÿ֡Σ	by rubbing the trunks against each other (B27L 1/04 takes precedence); Equipment for wet practice [5]
B27L   1/02 501 \	2	2	2B241	B27L   1/02	1	ÿ	Water adding device
B27L   1/04  \	1	1	2B241	B27L   1/04	49	žɥˤƼ໤뤳ȤˤΡΣ	by rubbing the trunks in rotating drums [5]
B27L   1/04 501 \	2	2	2B241	B27L   1/04	3	ɥȼ໤ħΤ	characterized by friction between the drum and tree trunk
B27L   1/04 502 \	3	3	2B241	B27L   1/04	21		Log feed
B27L   1/04 503 \	3	3	2B241	B27L   1/04	13	ɥβžư	Drum rotation drive
B27L   1/04 504 \	2	2	2B241	B27L   1/04	1	ߤ໤ħΤ	characterized by mutual friction between tree trunks
B27L   1/05  \	2	2	2B241	B27L   1/05	53	ΤΥɥΣ	Drums therefor [5]
B27L   1/05 501 \	3	3	2B241	B27L   1/05	35	ɥɤħΤ	characterized by the drum inner wall
B27L   1/05 502 \	3	3	2B241	B27L   1/05	29	ɥħΤ	characterized by the space in the drum
B27L   1/05 504 \	3	3	2B241	B27L   1/05	39	ɥ೰غѤڤܤ	Action given from the outside of the drum to the inside
B27L   1/06  \	1	1	2B241	B27L   1/06	115	νޤϻפνΤμư֤ޤϷ	Manually-operated or portable devices for debarking or for removing vestiges of branches
B27L   1/08  \	1	1	2B241	B27L   1/08	81	ž󥰤ѤΡΣ	using rotating rings [5]
B27L   1/08 501 \	2	2	2B241	B27L   1/08	82	ž󥰡	Rotary ring; its peeling blade
B27L   1/10  \	1	1	2B241	B27L   1/10	24	žǤ빩ѤΡʣ£̣£̣£̣ͥˡΣ	using rotatable tools (B27L 1/04, B27L 1/08, B27L 1/12 take precedence) [5]
B27L   1/10 501 \	2	2	2B241	B27L   1/10	135	ڤŪ˻ٻ	Log that is individually supported
B27L   1/10 502 \	3	3	2B241	B27L   1/10	89	ΤιΡ	Tool therefor (peeling member)
B27L   1/10 503 \	3	3	2B241	B27L   1/10	51		Log feed
B27L   1/10 504 \	2	2	2B241	B27L   1/10	59	ڤ꼰ƴɤǻٻ	Log that is supported by the inner wall of a stationary container
B27L   1/10 505 \	3	3	2B241	B27L   1/10	44	ΤιΡ	Tool therefor (peeling member)
B27L   1/10 506 \	3	3	2B241	B27L   1/10	7		Log feed
B27L   1/12  \	1	1	2B241	B27L   1/12	44	ʤ뤳ȤǤ빩ѤΡΣ	using pliable tools [5]
B27L   1/12 501 \	2	2	2B241	B27L   1/12	12	Ρ	Tool (peeling member)
B27L   1/14  \	1	1	2B241	B27L   1/14	1	ήưΤʮͤѤΡΣ	using jets of fluid [5]
B27L   1/14 501 \	2	2	2B241	B27L   1/14	46	ΤޤϱΤˤ	using a gas or liquid
B27L   1/14 502 \	2	2	2B241	B27L   1/14	3	ʴΤޤγΤˤ	using powder or grains
B27L   3/00  \	0	0	2B241	B27L   3/00	11	Ūˤν	Debarking by chemical treatment
B27L   5/00  \	0	0	2B242	B27L   5/00	149	ñĤ¤ñĤޤϹĤβù£ġ	Manufacture of veneer (working veneer or plywood B27D)
B27L   5/00  A	0	0	2B242	B27L   5/00	43	ڤν佤	Log correction or repair
B27L   5/00  B	0	1	2B242	B27L   5/00	48	佤̳ؤޡ	Repair by embedding (including deposition on the outer surface)
B27L   5/00  C	0	1	2B242	B27L   5/00	65	ܹ硤ˤ뽤̾ڤνޡ	Correction by bonding or integration (including integration of small diameter wooden members)
B27L   5/00  D	0	1	2B242	B27L   5/00	55	ڸζ	Butt end enhancement
B27L   5/00  E	0	0	2B242	B27L   5/00	40	եĥ	Flitch formation
B27L   5/00  F	0	1	2B242	B27L   5/00	768	եĥ	Integrated flitch
B27L   5/00  G	0	2	2B242	B27L   5/00	84	֥ĥν	Block integration
B27L   5/00  H	0	2	2B242	B27L   5/00	173	̷ͤ˴ؤΡ̣ˡ	related to moulding (mould), e.g. mould, method
B27L   5/00  Z	0	0	2B242	B27L   5/00	107	¾ΤΡ̣ʳñĤ¤ž夲	Others (single plate manufacture, finish inspection, etc. other than 5/02, 5/04, 5/06)
B27L   5/02  \	1	1	2B242	B27L   5/02	143	žƤñĤڤФñ	Cutting strips from a rotating trunk or piece; Veneer lathes
B27L   5/02  A	1	0	2B242	B27L   5/02	86	ݥݥݥʹ̥ݥݥݥؤθڽޤ	Pre-treatment process by a rotary lathe (including loading/unloading the log to or from the rotary lathe)
B27L   5/02  B	1	1	2B242	B27L   5/02	135	ڤοĽФ	Log centring
B27L   5/02  C	1	0	2B242	B27L   5/02	220	ݥݥݥںˡޡ	Rotary lathe (including the cutting method)
B27L   5/02  D	1	1	2B242	B27L   5/02	119	ĥ󥰡̥ԥɥޡ	Chucking (including the spindle)
B27L   5/02  E	1	1	2B242	B27L   5/02	169	Ϥں	Cutting part of the blade
B27L   5/02  F	1	1	2B242	B27L   5/02	73	̣ץĥݥСݡ	Pressing member, e.g. pressure bar
B27L   5/02  G	1	2	2B242	B27L   5/02	30	ݥݥС	Roller bar
B27L   5/02  H	1	3	2B242	B27L   5/02	29	ưפΥݥݥС	Driven type roller bar
B27L   5/02  J	1	2	2B242	B27L   5/02	22	ץ쥷ݥСݡݥݥСʻѥ	Type used for both pressure bar and roller bar
B27L   5/02  K	1	1	2B242	B27L   5/02	15	ڶư̥ԥɥưޡ	Log drive (including spindle drive)
B27L   5/02  L	1	2	2B242	B27L   5/02	77	ư	Circumferential drive
B27L   5/02  M	1	3	2B242	B27L   5/02	66	ԥɥưʻ	Spindle drive also used
B27L   5/02  N	1	2	2B242	B27L   5/02	28	ӽñĤȤ®Ĵ	Speed adjustment for the unloaded single plate
B27L   5/02  P	1	1	2B242	B27L   5/02	20	ںľñĤν̥ݥݥݥ̩ܴϢ͡ñĤβùΤϡ£ģ	Single plate treatment immediately after cutting (closely related to the rotary lathe) (pre-treatment for single plate machining B 27 D 1/00)
B27L   5/02  Q	1	2	2B242	B27L   5/02	58	ñİ	Single plate transfer
B27L   5/02  R	1	2	2B242	B27L   5/02	164		Take-up
B27L   5/02  S	1	2	2B242	B27L   5/02	80	̣ƥݡ	Correction, e.g. tenderisation
B27L   5/02  T	1	2	2B242	B27L   5/02	91	䶯̣졤ơݥԥ󥰡	Reinforcement, e.g. thread insertion, taping
B27L   5/02  U	1	1	2B242	B27L   5/02	56	ʣħͭΡ̥ݥݥݥ̩ܤ˴Ϣ幩ȤΰĽ	characterized by multiple treatments (closely related to the rotary lathe, consistent treatment including the preceding and subsequent processes)
B27L   5/02  Z	1	0	2B242	B27L   5/02	6	¾	Others
B27L   5/04  \	2	2	2B242	B27L   5/04	17	γ¦˰֤뼴濴˼ž	the trunk being rotated about an axis lying outside it
B27L   5/06  \	1	1	2B242	B27L   5/06	40	ưϤˤñĤڤФޤưϤˤΡñڤФ	Cutting strips from a stationarily-held trunk or piece by a rocking knife carrier, or from rocking trunk or piece by a stationarily-held knife carrier; Veneer-cutting machines
B27L   5/06  A	1	0	2B242	B27L   5/06	158	ڡ̥եĥͤĻ֡ڤβùޡ	Log (flitch) holding (including the device and log machining)
B27L   5/06  B	1	0	2B242	B27L   5/06	126	ưϷ饤	Moving blade type slicer
B27L   5/06  C	1	1	2B242	B27L   5/06	41	Ϥζư	Blade drive
B27L   5/06  D	1	0	2B242	B27L   5/06	15	Ϸ饤	Stationary blade type slicer
B27L   5/06  E	1	1	2B242	B27L   5/06	18	ľڰư	Vertical log moving
B27L   5/06  F	1	1	2B242	B27L   5/06	190	ʿڰư	Horizontal log moving
B27L   5/06  G	1	0	2B242	B27L   5/06	206	¡Ķ̤οںա	Blade common to B and D (around the cutting edge)
B27L   5/06  H	1	0	2B242	B27L   5/06	35	ñĤμФ½	Single plate unloading and carrying out
B27L   5/06  Z	1	0	2B242	B27L   5/06	101	¾ΤΡü֡ˡ	Others (pre-treatment, special device, method)
B27L   5/08  \	1	1	2B242	B27L   5/08	46	Ϣ³ñĤñĥȤޤҤǡΤΥ֡ñǺ¤㡥Υ˺뤳	Severing sheets or segments from veneer strips; Shearing devices therefor; Making veneer blanks, e.g. trimming to size
B27L   5/08  A	1	0	2B242	B27L   5/08	232	ǹԤñĤܹޤ	Cutting part (including single plate bonding at the cutting part)
B27L   5/08  B	1	1	2B242	B27L   5/08	69	ñĤʬΥʬ̩ۡܤʴطΤΡ	Separation or distribution of the single plate (closely related to the cutting part)
B27L   5/08  C	1	2	2B242	B27L   5/08	47	ʬʥ	Dissection knife
B27L   5/08  D	1	1	2B242	B27L   5/08	47	Ϥζư	Blade drive
B27L   5/08  E	1	0	2B242	B27L   5/08	238	̥󥵡ݡ桤桤ˡФ	Control (sensor, cutting part control, feed control, dimension control, etc.)
B27L   5/08  F	1	0	2B242	B27L   5/08	64	½С̼ʡưñĤλѹ	Carrying in/out (means, drive, single plate attitude change, etc.)
B27L   5/08  G	1	0	2B242	B27L   5/08	66	ñĤӽñĤʬΥʬ̣ۡ¤͡ں̩ܤʴطΤϡ¡	Junk single plate removal, single plate separation or distribution (excluding B) (closely related to the cutting part B)
B27L   5/08  H	1	0	2B242	B27L   5/08	75	¿	Other processes in 5/08
B27L   5/08  Z	1	0	2B242	B27L   5/08	135	¾ΤΡ̣ʳȤȤ߹礻	Others, e.g. combination with other than 5/08
B27L   7/00  \	0	0	2B241	B27L   7/00	118	ںʬ֡Σ	Arrangements for splitting trunks or wood stock lengthwise (household implements for splitting wood A47J 49/02)
B27L   7/02  \	1	1	2B241	B27L   7/02	3	žѤΡΣ	using rotating members
B27L   7/04  \	2	2	2B241	B27L   7/04	0	߿ͤΣ	Conical screws
B27L   7/06  \	1	1	2B241	B27L   7/06	5	ӡʥդޤϥץåѤΡʣ£̣ͥˡΣ	using wedges, knives or spreaders (B27L  7/02 takes precedence);;
B27L   7/08  \	1	1	2B241	B27L   7/08	5	ѤΡΣ	using chopping blocks
B27L   9/00  \	0	0	2B241	B27L   9/00	138	ڤʪ㡥Ĥޤ褦¤ʤĤ¤£ͣޥå¤ˤ¾ȷ礷Σãơ	Manufacture of wooden sticks, e.g. toothpicks (of walking sticks, of sticks for umbrellas B27M 3/38; combined with other operations in the manufacture of matches C06F)
B27L  11/00  \	0	0	2B241	B27L  11/00	72	ڡåסʴޤʪ¤ʴհ̣£áʬʤȹ蘆줿ڤѵޤϵӤ££ӤΤݤκμģ£ˡģ£ˡΤιΣ	Manufacture of wood shavings, chips, powder, or the like (disintegrating in general B02C; edge trimming sawing blades or sawing tools combined with means to disintegrate waste B27B 33/20; obtaining fibres for spinning D01B 1/00; wet methods D21B 1/12); Tools therefor [2]
B27L  11/00  A	0	0	2B241	B27L  11/00	24	ɥĥѡ	Drum chipper
B27L  11/00  B	0	1	2B241	B27L  11/00	7	ˡ	Method
B27L  11/00  C	0	1	2B241	B27L  11/00	119		Device
B27L  11/00  D	0	2	2B241	B27L  11/00	44		Feed-in unit
B27L  11/00  E	0	2	2B241	B27L  11/00	58	ں	Cutting part
B27L  11/00  F	0	2	2B241	B27L  11/00	11	ӽ	Unloading part
B27L  11/00  G	0	0	2B241	B27L  11/00	87	ǥĥѡ	Disk chipper
B27L  11/00  H	0	1	2B241	B27L  11/00	3	ˡ	Method
B27L  11/00  J	0	1	2B241	B27L  11/00	28		Device
B27L  11/00  K	0	2	2B241	B27L  11/00	57		Feed-in unit
B27L  11/00  L	0	2	2B241	B27L  11/00	117	ں	Cutting part
B27L  11/00  M	0	2	2B241	B27L  11/00	9	ӽ	Unloading part
B27L  11/00  N	0	0	2B241	B27L  11/00	377	üĥѡݡ̣޾򡦼	Special chipper, e.g. limbs, tree skin
B27L  11/00  P	0	0	2B241	B27L  11/00	88	ڵڤӤˡ	Wood shavings and the manufacturing method and device thereof
B27L  11/00  Z	0	0	2B241	B27L  11/00	153	¾	Others
B27L  11/02  \	1	1	2B241	B27L  11/02	35	ޤƱʪ¤	of wood shavings or the like
B27L  11/04  \	2	2	2B241	B27L  11/04	91	Ӥ¤	of wood wool
B27L  11/06  \	1	1	2B241	B27L  11/06	214	ʴޤϤ¤У£ġ	of wood powder or sawdust (grinding-stones B24D)
B27L  11/08  \	1	1	2B241	B27L  11/08	34	ݡ㡥ǤˤäƺΡ¤	of wood fibres, e.g. produced by tearing
B27L  11/08  A	1	0	2B241	B27L  11/08	43	̣ĹҾʪ	Split-tearing, press-tearing, e.g. irregular shape thin and long piece
B27L  11/08  Z	1	0	2B241	B27L  11/08	53	¾	Others
