B66F   1/00  \	0	0	3F312	B66F   1/00	121	餫줿ʳ˲ʪ夲뤿֡㡥å	Devices, e.g. jacks, for lifting loads in predetermined steps
B66F   1/02  \	1	1	3F312	B66F   1/02	3	ȶƯ뺿ǡ㡥Ǥܤɽ̡Ĥ	with locking elements, e.g. washers, co-operating with posts
B66F   1/02  A	1	0	3F312	B66F   1/02	29	Ū˰ư뾺ΤΥĥȤĤΡ㡥ղŪɻߥԥ󡤥ȥĥѥĥ͡Ф뾺ΰ֤Ūݻ뤿ˡ¿ϼưˤĤƻ˺ꡤդꤹĥʬࡣФֿͥ͡ޡ	with separate locking members different from rising and falling members relatively moving against pillar e.g. additional pins for preventing falling, stopper washers (note: Locking members are mainly classified in this category that are either manually inserted into or mounted on posts for temporarily holding position of rising and falling member.  Takes precedence to 1/04)
B66F   1/02  B	1	0	3F312	B66F   1/02	1	ȹ䷸ʤФĥַ羺㡥żФˤ˵夹Ρˤ˵夹Ρֿ͡ޡ	intermittently rising and falling members with locking members relative to posts without having engagements or connections, e.g. adhered to pillar by solenoid, adhered to pillar by vacuum [figure]
B66F   1/02  C	1	1	3F312	B66F   1/02	33	ӤѤĥĤΡ㡥ĥβ̡ưɡֿ͡ޡ	with locking members using of wedges, e.g. pushing surface of locking members, sliding guides [figure]
B66F   1/02  D	1	2	3F312	B66F   1/02	10	Ū˺ưΡ㡥СݤưƾߤΡֿ͡ޡ	actuated mechanically, e.g. rising and falling by oscillating lever [figure]
B66F   1/02  E	1	2	3F312	B66F   1/02	60	ήŪ˺ưΡ㡥岼˰ȤΥͭ륷֡	actuated by fluid means, e.g. cylinder devices provided with a set of wedge members on top and bottom
B66F   1/02  H	1	1	3F312	B66F   1/02	10	Ӱʳ໤ϤѤĥĤΡ㡥໤֥ݥαѡ켴ФпľѤΡФѷ¤δľѤΡֿ͡ޡ	with locking members using of friction forces excluding wedges, e.g. applications of friction brakes, using of annular member arranged eccentric to pillar axis,  using of annular members with variable diameter relative to pillar [figure]
B66F   1/02  J	1	2	3F312	B66F   1/02	28	Ū˺ưΡ㡥СݤưƾߤΡֿ͡ޡ	mechanically actuated, e.g. rising and falling by oscillating lever [figure]
B66F   1/02  K	1	2	3F312	B66F   1/02	16	ήŪ˺ưΡֿޡ	actuated by fluid means [figure]
B66F   1/02  Z	1	0	3F312	B66F   1/02	16	¾Τ	Others
B66F   1/04  \	2	2	3F312	B66F   1/04	28	ߤ	the posts being toothed
B66F   1/06  \	3	3	3F312	B66F   1/06	2	ĵŪ˺ư	and the devices being actuated mechanically
B66F   1/06  A	3	0	3F312	B66F   1/06	66	ĻФưƷæĥĤΡ㡥ĥֿ͡ޡ	with locking members engaged and disengaged by oscillating relative to pillar with saw teeth, e.g. ratchet members [figure]
B66F   1/06  B	3	0	3F312	B66F   1/06	27	¤ޤϲĻФζưƷæĥĤΡֿޡ	with locking members engaged and disengaged by sliding along width of pillar relative to the same provided with sideway grooves or holes [figure]
B66F   1/06  Z	3	0	3F312	B66F   1/06	24	¾Τ	Others
B66F   1/08  \	3	3	3F312	B66F   1/08	12	ήΰˤäƺư	and the devices being operated by fluid pressure
B66F   1/08  A	3	0	3F312	B66F   1/08	54	ĻФưƷæĥĤΡ㡥ĥ͡륻󥿡ݥۡݥ른ĥʬֿ͡ޡ	with locking members engaged and disengaged by oscillating relative to pillar with saw teeth, e.g. ratchet members (note: So called centre hole jacks are classified here.) [figure]
B66F   1/08  B	3	0	3F312	B66F   1/08	75	¤ޤϲĻФζưƷæĥĤΡֿޡ	with locking members engaged and disengaged by sliding along width of pillar relative to the same provided with sideway grooves or holes [figure]
B66F   1/08  C	3	0	3F312	B66F   1/08	123	ήβϩħ㡥ࡤĥ򥷡ݥ󥷥˺ư뤿ήʡֿ͡ޡ	features of fluid circuits, e.g. fluid control means for sequentially actuating rising and falling members or locking members [figure]
B66F   1/08  Z	3	0	3F312	B66F   1/08	57	¾ΤΡ㡥˹ߤͥ¤礹ʥĥȤĥȤΡ	Others, e.g. locking member being as a nut engaging in threaded groove formed on pillar
B66F   3/00  \	0	0	3F312	B66F   3/00	202	ʪϢ³Ūˤ夲뤿Ŭ礹֡㡥ĥʥ졼ΰưĥ£ƣ	Devices, e.g. jacks, adapted for uninterrupted lifting of loads (mobile jacks of the garage type B66F 5/00)
B66F   3/02  \	1	1	3F312	B66F   3/02	204	ԥ˥ˤäƺưåĤ	with racks actuated by pinions
B66F   3/04  \	2	2	3F312	B66F   3/04	35	ĤΥåĤ	with several racks
B66F   3/06  \	2	2	3F312	B66F   3/06	14	ưߤľޤϱ߸ࡤ㡥ģȤ֤ƤΡʤåĤ	with racks comprising pivotable toothed sections or segments, e.g. arranged in pairs
B66F   3/08  \	1	1	3F312	B66F   3/08	27	ͥΡʣ£ƣͥ表ư֣ƣȡ	screw-operated (B66F 3/44 takes precedence; gearings F16H)
B66F   3/08  A	1	0	3F312	B66F   3/08	87	åΥե졼ࡤͤħ㡥ɬפ˱ǽ˼դ줿Ρޤؤưפʹ¤ֿ͡ޡ	features of jack frames, mounting styles, e.g. mounted to allow raising or laying on an as required basis, structures facilitating insertion into gaps [figure]
B66F   3/08  B	1	1	3F312	B66F   3/08	120	ٷħ㡥٥վ廮ֿ͡ޡ	features of load connections, e.g. upper dish with bearing [figure]
B66F   3/08  C	1	1	3F312	B66F   3/08	83	åؤħ㡥٤ߤֿ͡ޡ	features at bottom of jacks, e.g. slip stoppers [figure]
B66F   3/08  D	1	1	3F312	B66F   3/08	52	åοФ㡥֤碌ΤβԵ֤碌Τưֿ͡ޡ	Centring mechanisms for jacks, e.g. traverse mechanisms for positioning, oscillating mechanisms for positioning [figure]
B66F   3/08  G	1	0	3F312	B66F   3/08	59	꡼֤ξü˳ơܥȤ򿭽̼ߤ礷ΡޤϤεդι¤㡥Хå뷿Υå͡Ф꡼֤ϡֿ͡ޡ	Bolts screwed at both ends of sleeve so that they can be freely extended or contracted or opposite structure thereof, e.g. turnbuckle jack (note: Pay out sleeves 3/10) [figure]
B66F   3/08  J	1	0	3F312	B66F   3/08	82	ɻߵ㡥塼Τޤߤ͡ߤΤΥȥåץʥåȤϣ̤ϣֿ͡ޡ	Mechanisms for preventing falling, e.g. rotation stoppers for screw (note: Stop nuts for preventing cylinders from returning 3/30, safety in general 17/00) [figure]
B66F   3/08  L	1	0	3F312	B66F   3/08	53	ե꡼ʥåȵϡեʥåѤåν⤵®ꤹ뤿ᡤ塼ȥʥåȤȤŪ˷æǤΡֿ͡ޡ	Free nut mechanisms (note: Screw and nut can be selectively attached or detached to promptly set initial jack height using half nut.) [figure]
B66F   3/08  Z	1	0	3F312	B66F   3/08	225	¾Τ	Others
B66F   3/10  \	2	2	3F312	B66F   3/10	240	Ф꡼֤Ĥ	with telescopic sleeves
B66F   3/12  \	2	2	3F312	B66F   3/12	31	ȥСʤΡʥ졼ȥ󥰵£ƣ	comprising toggle levers (lazy-tongs mechanisms B66F 3/22)
B66F   3/12  A	2	0	3F312	B66F   3/12	167	󥯵ħĤΡ㡥Х󥹤ݤĤդˤҥ󥯡󥯥Υҥ󥸹¤󥯥ե졼ħֿ͡ޡ	characterised by linkage mechanisms, e.g. diamond-shaped linkages with scalene for maintaining balance, hinge structures of linkage arms, features of linkage frames [figure]
B66F   3/12  B	2	1	3F312	B66F   3/12	84	äɩʳΥ󥯹¤ħĤΡ㡥ٷַΥ󥯹¤ֿ͡ޡ	characterised by linkage structures in particular with those excluding diamond-shaped, e.g. linkage structures with y-shaped or v-shaped [figure]
B66F   3/12  C	2	0	3F312	B66F   3/12	227	ͥưħ㡥ͥ۸ϥɥȤη󥯤ߤʥå͡ưϸĶưϡȡֿ͡ޡ	features of screw drives, e.g.. screw levers, handle connections, nut provided on linkage (note: See 3/44 and 7/08 for drives with power sources.) [figure]
B66F   3/12  D	2	1	3F312	B66F   3/12	39	ꡤᵡ㡥ե꡼ʥåȵʤ塼ȥʥåȤȤγ󥯤ˤƳ礵굡ֿ͡ޡ	Rapid fee or return mechanisms, e.g. free nut mechanisms, that is, rapid feed mechanism releasing engagement between nut and screw, setting linkage to a certain height, and then engaging them once again [figure]
B66F   3/12  E	2	0	3F312	B66F   3/12	52	ѡդħ㡥ʪʤսؤμաгĴΤαѡֿ͡ޡ	applications or mounting features, e.g. mounting at particular locations on articles, applications for finer adjustment of article angle [figure]
B66F   3/12  F	2	1	3F312	B66F   3/12	131	ħ㡥廮ġФΤβ饤ɵֿͥ͡͡ޡ	connection features, e.g. upper dishes, bottom plates, sideway sliding mechanism for centring (note: Takes precedence to 3/08) [figure]
B66F   3/12  G	2	1	3F312	B66F   3/12	54	ä˼Ǽ֤ħΡ㡥ΤؤΥåμǼֿ͡ޡ	characterised by accommodated conditions in particular, e.g. accommodating jack in body [figure]
B66F   3/12  H	2	0	3F312	B66F   3/12	20	ɻߵ㡥å͡ʤֿͥ͡ޡ	mechanisms for preventing falling, e.g. locking mechanisms (note: Takes precedence to 3/08J) [figure]
B66F   3/12  Z	2	0	3F312	B66F   3/12	79	¾Τ	Others
B66F   3/14  \	2	2	3F312	B66F   3/14	56	åȵ𤷤ƺư	actuated through pawl-and-ratchet mechanisms
B66F   3/16  \	2	2	3F312	B66F   3/16	155	٥٥륮𤷤ƺư	actuated through bevel-wheel gearings
B66F   3/18  \	2	2	3F312	B66F   3/18	114	८𤷤ƺư	actuated through worm gearings
B66F   3/20  \	2	2	3F312	B66F   3/20	25	¿Τޤϲ®٤ư֤𤷤ƺư	actuated through multiple or change-speed gearings
B66F   3/22  \	1	1	3F312	B66F   3/22	38	졼ȥ󥰵	Lazy-tongs mechanisms
B66F   3/24  \	1	1	3F312	B66F   3/24	36	ήΰϤΡʿ尵ƣ¡ήΰܥ⡼ƣ¡ȯ塼ƣ£ήư֣ƣȡԥȥƣʡ	fluid-pressure operated (water-pressure machines F03B; fluid-pressure servomotors F15B, e.g. pyrotechnical actuators F15B 15/19; hydraulic gearings F16H; cylinders, pistons F16J)
B66F   3/24  A	1	0	3F312	B66F   3/24	237	åΥե졼ࡤͤħ㡥üʬؤαѤŬե졼๽¤åλٻ¤ɡġֿ͡ޡ	features of jack frames or mounting styles, e.g. frame structures adapted for applications to special fields, supporting structures of jack, bottom plates [figure]
B66F   3/24  B	1	0	3F312	B66F   3/24	116	ʪʤ˰ư뤿αհå졼ưåϣ˷ʪ򲣤˲ƥ饤ɤ褦ʤΤʬ͡㡥֥ξü˰ĥѥեåޤϲϼĤĥåֿ͡ޡ	Fluid pressure jack for sliding an object in the horizontal direction [Notes: garage-type movable jack is classified to  5/00. The jacks that make a building to slide mainly by pushing are classified to this place.][e.g. Thrusting jacks equipped with a pulling hook or a pressing tray at the both ends of the horizontal cylinder][figure]
B66F   3/24  C	1	1	3F312	B66F   3/24	122	ä˲ѥåȤβʼʤȤΡФʤϡʬֿ͡ޡ	consisting of push-up jack and means for pushing it sideways (note:  cantering means are classified here.) [figure]
B66F   3/24  D	1	0	3F312	B66F   3/24	185	ήΡ㡥ͤѤΡ٥ħϡֿ͡ޡ	using of compressive fluids, e.g. air (note: Features for bellows 3/35) [figure]
B66F   3/24  E	1	0	3F312	B66F   3/24	15	ǮˤήΤѲѤΡȯåϡֿ͡ޡ	applications of volumetric changes in fluids due by heat (note: Explosion jacks 3/43) [figure]
B66F   3/24  F	1	0	3F312	B66F   3/24	50	ưȥСå㡥ǥ󥯤ĤΡ塼۸⡼Ƕư󥯤ĤΡͥȥСååȤȹ礻ֿ͡ޡ	Hydraulically driven toggle lever jacks, e.g. opening and closing linkage with cylinder, opening and closing linkage by driving screw lever with hydraulic motor, combination of screw toggle lever jack and hydraulic jack) [figure]
B66F   3/24  G	1	0	3F312	B66F   3/24	18	ưåԥ˥ޤϥͥå㡥⡼ľܥԥ˥ưΡ󥯵𤷤ǥʥåȤưΡͥååȤȤ߹碌ˡֿޡ	Hydraulically driven rack and pinion or screw jacks, e.g. directly driving pinion by hydraulic motor, driving nut by hydraulic cylinder via crank mechanism, combination of screw and hydraulic jacks [figure]
B66F   3/24  H	1	0	3F312	B66F   3/24	66	ȥåޤؤưפˤհåǡܥͤη򤷤Ƥֿ͡ޡ	Short jacks (note: Thin hydraulic cylinder jacks for facilitating insertion into gaps, which resemble button battery shape) [figure]
B66F   3/24  J	1	0	3F312	B66F   3/24	21	ꡤᤷ㡥꥿󥹥ץ󥰡Хѥϩֿ͡ޡ	Rapid feed and return mechanisms, e.g. return spring, bypass circuits [figure]
B66F   3/24  K	1	0	3F312	B66F   3/24	252	ϩħ㡥桤ʤʪʤΥͥ륮¸ơѤΡ®ʤ֡ѹ͡ݥפϡåϡϢưϡֿ͡ޡ	Features of hydraulic circuits, e.g. regenerative control, that is, pushing up an article by using energy stored when it is falling.  Descending speed control throttling devices, pushing force changing mechanisms) (note: Pumps 3/42, cushions 3/32, interlo
B66F   3/24  Z	1	0	3F312	B66F   3/24	119	¾Τ	Others
B66F   3/25  \	2	2	3F312	B66F   3/25	79	¤ħΣ	Constructional features [3]
B66F   3/26  \	3	3	3F312	B66F   3/26	235	ԥȥ֤ޤ֡Σ	Adaptations or arrangements of pistons [3]
B66F   3/28  \	4	4	3F312	B66F   3/28	154	ФΣ	telescopic [3]
B66F   3/30  \	3	3	3F312	B66F   3/30	193	μ¤ʥ֥졼ޤϺĤΡΣ	Positive brakes or locks [3]
B66F   3/32  \	3	3	3F312	B66F   3/32	47	ưλκݤβʾ׷򤱤뤿֡Σ	Means for avoiding excessive shocks on completion movements [3]
B66F   3/35  \	3	3	3F312	B66F   3/35	273	ĥǤǡ㡥٥ĥǤʪǣ£ƣĥǽΤؤۤμդ£ãˡΣ	Inflatable flexible elements, e.g. bellows (inflatable load-engaging elements B66F 3/40; connection of valves to inflatable elastic bodies B60C 29/00) [3]
B66F   3/36  \	3	3	3F312	B66F   3/36	182	ʪǡΣ	Load-engaging elements [3]
B66F   3/38  \	4	4	3F312	B66F   3/38	26	ԥȥ˴ϢĴǤΡΣ	adjustable relative to piston [3]
B66F   3/40  \	4	4	3F312	B66F   3/40	15	ĥǤΡĥǽΤؤۤμդ£ãˡΣ	inflatable (connection of valves to inflatable elastic bodies B60C 29/00) [3]
B66F   3/42  \	3	3	3F312	B66F   3/42	307	¢ݥס㡥ˤäƺưΡĤΡΣ	with self-contained pumps, e.g. actuated by hand [3]
B66F   3/43  \	2	2	3F312	B66F   3/43	21	ȯåΣ	Pyrotechnical jacks [3]
B66F   3/44  \	1	1	3F312	B66F   3/44	225	¢ưĤ	with self-contained electric driving motors
B66F   3/46  \	1	1	3F312	B66F   3/46	355	徺ޤϲ߱ưߤ˴طʤͭĤΥåȤ߹碌	Combinations of several jacks with means for interrelating lifting or lowering movements
B66F   5/00  \	0	0	3F312	B66F   5/00	20	ؾޤϥˤդ줿졼ΰưå	Mobile jacks of the garage type mounted on wheels or rollers
B66F   5/00  A	0	0	3F312	B66F   5/00	13	ذʳΰưʤħĤΡ㡥ݥ顤ĥԥ˥ˤưΡֿ͡ޡ	Characterised by moving means excluding wheels, e.g. moving by crawlers or rack and pinion [figure]
B66F   5/00  B	0	0	3F312	B66F   5/00	55	ĥ߼ʤħĤΡ㡥˥ĥ̤̤ܤ褦ߤΡػߤᵡֿ͡ޡ	Characterised by means for stopping jacks, e.g. bottom surface of jack is lowered during jacking up so that it contacts with floor, wheel stopper mechanisms [figure]
B66F   5/00  C	0	0	3F312	B66F   5/00	78	ٷ㡥ͤħͥĥμ¡ȥ뼰ĥμơήμĥμֿ͡ޡ	Features of .load engaging portions, e.g. receptacle (note: Receptacles for screw jacks 3/08 B, receptacles for toggle jacks 3/12 F, receptacles for hydraulic jacks 3/36) [figure]
B66F   5/00  Z	0	0	3F312	B66F   5/00	150	¾ΤΡֿޡ	Others [figure]
B66F   5/02  \	1	1	3F312	B66F   5/02	112	Ū夲ư֤Ĥ	with mechanical lifting gear
B66F   5/04  \	1	1	3F312	B66F   5/04	358	ήΰ夲ư֤Ĥ	with fluid-pressure-operated lifting gear
B66F   7/00  \	0	0	3F330	B66F   7/00	65	夲ȡ㡥ξ夲뤿ΤΡץåȥեեȡʥեƥ󥰥ץåȥեȥå£ƣ	Lifting frames, e.g. for lifting vehicles; Platform lifts (for lift-truck platforms B66F 9/06)
B66F   7/02  \	1	1	3F330	B66F   7/02	48	ס֥롤ޤϥ󤫤ߤץåȥեĤ	with platforms suspended from ropes, cables, or chains
B66F   7/02  A	1	0	3F330	B66F   7/02	104	ٻե졼ࡤʤʤȤ줫ٻȡФΤˤĤƾߤȤͭΡ§ȤƼˤ겣ԤΤϴޤޤʤ夨߲Ĥ΢졼󡤣£á˥饤ǥ󥰥եͭԤ΢å졼󡤣£ǣ£ƣ¤ʪξΤˤߤ겼΢­졤ɥ顤ţǡե򾺹ߤ֤οͲ٤α¤˶΢١£¡夨ʪֿޡ	characterized by the installation of a supporting frame, that is, a supporting portion consisting of at least a supporting pole and mounted members that are ascended/descended by the tracting cable with respect to the abovementioned frame.  [Notes: In principle, supporting frames that are made horizontally slidable by using wheels, etc., are not included. When there exists the suspension portion in place of the mounting portion, B66C Crane, shall be assigned. When there exists a sliding fork that enables the horizontal movement at the mounting portion, B65G1/00, B66F9/07 Stacker crane, shall be assigned. When the mounting portion is suspended from the upper portion of a building by using the tracting cable, E04G Construction scaffold, Gondola, shall be assigned. When there exists the function to convey staff and cargo by ascending/descending the platform in the shaft, B66B Specific items in place of the mounting portion, shall be assigned.][figure]
B66F   7/02  B	1	1	3F330	B66F   7/02	191	һ̰켰ͤλٻ¤ħΤΡֿޡ	Characterised by cantilever (one column) supporting structures [figure]
B66F   7/02  C	1	2	3F330	B66F   7/02	43	ξѰ켰եȡֿޡ	One-column lifts for lifting vehicles [figure]
B66F   7/02  D	1	2	3F330	B66F   7/02	52	ޤϲ椬ľޤ˲ưǽʤΡֿޡ	posts or platforms that can be revolved around vertical axis [figure]
B66F   7/02  E	1	2	3F330	B66F   7/02	182	ζưɼʡ֤ħֿޡ	Features of rope drives, guiding means, rope arrangements [figure]
B66F   7/02  F	1	1	3F330	B66F   7/02	130	ξ켰ͤλٻ¤ħΤΡʤ餺֤ˤĤʤĤͭ뤳ȤפʤФһեȤϢưΤ⡤ʪʤξ֤ξٻΤϴޤࡣֿޡ	Characterised by double support (two posts) structures (note: It is not mandatory to have platform connected to both posts.  Also includes a pair of cantilever lifts mutually interlocked if they support articles between two posts. [figure]
B66F   7/02  G	1	2	3F330	B66F   7/02	13	ޤϲ椬ľޤ˲ưǽʤΡֿޡ	posts or platforms that can be revolved around vertical axis [figure]
B66F   7/02  H	1	2	3F330	B66F   7/02	145	ξ켰եȡ桤¡ֿ͡ޡ	Two-column lifts for lifting vehicles (note: Platforms 7/28 B) [figure]
B66F   7/02  J	1	2	3F330	B66F   7/02	273	ζưɼʡ֤ħ㡥ΥɥˤλͶϢư߾夲뤿Υ磻ݤޤ路¤ֿ͡ޡ	Features of rope drives, guiding means, rope arrangements, e.g. wiring mechanism for lifting four corners of platform using one drum [figure]
B66F   7/02  N	1	0	3F330	B66F   7/02	80	Τˤƥ쥹ԥå˿̤Ǿߤ򾺹ߤΡȼ֤ϡΡֿ͡ޡ	telescopically expanded and contracted by rope for rising and falling platform provided at the highest position (note: Truck lifts 9/06 N) [figure]
B66F   7/02  Z	1	0	3F330	B66F   7/02	50	¾Τ	Others
B66F   7/04  \	2	2	3F330	B66F   7/04	181	հޤ϶ˤäƶư	hydraulically or pneumatically operated
B66F   7/06  \	1	1	3F330	B66F   7/06	20	ľưΤСˤäƻٻץåȥե	with platforms supported by levers for vertical movement
B66F   7/06  A	1	0	3F330	B66F   7/06	117	ե졼ࡤ¤ħ㡥䥹ءӤŬ뤿η֡٤ߤ͡󥯤ˤ뾺ߵȤƤθϡȥСʤ른åƱǤ롣ۤϡå򥹥ݥåŪ˻ٻ夲ΤФץåȥե¿뤤̤ٻ夲ˤ롣ư֤˺֤줿ĥץåȥեϡˡФֿͥ͡ޡ	characterised by frames, bottom structures, e.g. caster wheels, specific forms adapted for specific applications (Note: Principles of link elevating mechanisms are the same ones of jacks consisted of  toggle levers (3/12) .  While jacks support and lift o
B66F   7/06  B	1	0	3F330	B66F   7/06	236	󥯤ι¤ħĤΡ㡥󥯥ࡤ󥯥ɡ󥯤ֿ֡͡ޡ	characterised by linkage structures, e.g. linkage arms, linkage guide, linkage arrangements [figure]
B66F   7/06  C	1	1	3F330	B66F   7/06	171	ػѥ󥿥շʳüΥ󥯤ħĤΡ㡧ٷַľ󥯡ֿ͡ޡ	characterised by linkages with special profiles excluding X-shaped or pantograph type, e.g. Y-shaped, V-shaped, or sheet linkage [figure]
B66F   7/06  E	1	0	3F330	B66F   7/06	176	ξѥեȡ߲ΤΤϡáȡֿ͡͡ޡ	lifts for lifting vehicles (note: suspended type 7/02 C, H, M) [figure]
B66F   7/06  F	1	0	3F330	B66F   7/06	313	ư̥ͥ۸ʥåȡưʡֿ͡ޡ	drives (screw levers, nuts, motors, auxiliary biasing means) [figure]
B66F   7/06  Z	1	0	3F330	B66F   7/06	53	¾Τ	Others
B66F   7/08  \	2	2	3F330	B66F   7/08	47	հޤ϶ˤäƶư	hydraulically or pneumatically operated
B66F   7/08  A	2	0	3F330	B66F   7/08	81	ήΰưʤħ㡧ήθϩž奨ֿ͡ޡ	Features of hydraulic drive means (e.g. hydraulic sources, hydraulic circuits, rotary actuators) [figure]
B66F   7/08  B	2	0	3F330	B66F   7/08	83	ʳο̼奨㡥٥ͤΡ٥åֿ͡ޡ	with telescopic actuators excluding cylinders, e.g. bellows (note: Bellows jacks 3/35) [figure]
B66F   7/08  C	2	0	3F330	B66F   7/08	393	󥯼ץåȥեֿޡ	Linkage platforms provided with cylinder [figure]
B66F   7/08  D	2	1	3F330	B66F   7/08	94	󥯤޾߾֤εưưפˤ빽¤㡧ϤκѤࡤֿ͡ޡ	Structures facilitating start-up from folded linkage position, e.g. auxiliary cam for changing acting direction of force, auxiliary cylinder) [figure]
B66F   7/08  E	2	1	3F330	B66F   7/08	112	äưʤѤΡ㡧ľޤϿʿ֤줿եȥľܻٻФֿͥ͡ޡ	using of cylinder not oscillated in particular, e.g. lift cylinder arranged horizontally or vertically, direct support, Takes precedence to 7/10) [figure]
B66F   7/08  F	2	1	3F330	B66F   7/08	101	ä˥ѥ󥿥շ¿ʥ󥯤ĤΡֿޡ	with pantograph type multi-step linkages in particular [figure]
B66F   7/08  Z	2	0	3F330	B66F   7/08	28	¾Τ	Others
B66F   7/10  \	1	1	3F330	B66F   7/10	80	åˤäľܤ˻ٻץåȥեĤ	with platforms supported directly by jacks
B66F   7/12  \	2	2	3F330	B66F   7/12	252	åˤ	by mechanical jacks
B66F   7/14  \	3	3	3F330	B66F   7/14	406	ͤư	screw-operated
B66F   7/16  \	2	2	3F330	B66F   7/16	308	ĤޤϤʾαհޤ϶åˤ	by one or more hydraulic or pneumatic jacks
B66F   7/18  \	3	3	3F330	B66F   7/18	198	ñȤ濴åˤ	by a single central jack
B66F   7/20  \	3	3	3F330	B66F   7/20	13	ưκݥץåȥեοʿݻ뤿֤äĤΥåˤ	by several jacks with means for maintaining the platforms horizontal during movement
B66F   7/20  A	3	0	3F330	B66F   7/20	70	ʣΥο̤򵡳ŪƱĴΡ㡥ʿࡤåԥ˥Ȥʻѡ͡հưѥ󥿥եåϡֿͥޡ	mechanically synchronising extending or contracting motions of multiple cylinders, e.g. auxiliary horizontal guides, combination with rack and pinion (note: 7/08 takes precedence for hydraulically driven pantograph jacks.) [figure]
B66F   7/20  B	3	1	3F330	B66F   7/20	42	ΤѤΡֿޡ	using of ropes [figure]
B66F   7/20  C	3	1	3F330	B66F   7/20	67	֡åѤΡֿޡ	using of gears, racks, chains [figure]
B66F   7/20  D	3	0	3F330	B66F   7/20	250	ήμʤѤʣΥο̤ƱĴΡ㡥ʣľ³ʬ۽ήۡ͡ŵŪʤĤΤϡŤֿͥޡס	synchronising extending or contracting motions of multiple cylinders by using hydrodynamic means, e.g. parallel-connected flow distribution/collection valves for multiple cylinders (note: 17/00 E takes precedence if electrical control means are provided.)
B66F   7/20  Z	3	0	3F330	B66F   7/20	20	¾ΤΡ̥СξץåȥեΥ饤ϡţ£ֿ͡ޡ	Others (E 02 B 17/04 mainly applies to equalisers for barges or ocean platforms) [figure]
B66F   7/22  \	1	1	3F330	B66F   7/22	13	ФǤץåȥեĤΡʲٲΤ˼ξ򷹼ФΣ£ǣ	with tiltable platforms (tilting vehicles for unloading B65G 67/34)
B66F   7/22  A	1	0	3F330	B66F   7/22	86	ưϢưƥץĥȥե򷹼ФΡåץۥȡʤǾüžݤХåȤ뤤ϥۥåѡĤΤϡ££͡㡥ФޤϤʤɥ졼ˤץåȥե򷹤ξ徺ˤĤƷФѥ󥿥ե󥯵ֿ͡ޡ	tilting platforms while being interlocked with rising or falling motion (note: Skip hoists, that is, with buckets pr hoppers tipped over at top B 66 B 17/08), e.g. tilting platforms by tilted or curbed guide rails, pantograph-link mechanism with tilting a
B66F   7/22  B	1	0	3F330	B66F   7/22	101	ץåȥե¦Τߤ夲뤳ȤˤץåȥեηФԤʤΡץåȥեΤξߤϹԤʤ줺ϤͶΤ褦˥ץåȥեबΤʬह롣ۥåѡŪǥХå򷹤Τϡ£ǣֿ͡ޡ	tilting platforms by lifting only one side of it (note: Platforms per se are not lifted.  Tilted platforms such as drawbridge are assigned here.  Exceptions: tiling buckets for purpose of hopper B 65 G 65) [figure]
B66F   7/22  C	1	0	3F330	B66F   7/22	155	֤߰Ȥ̵ط˥ץåȥե򷹼ФΡ㡧ξץĥȥեˤƺλι⤵Ѥץĥȥե򷹤Ρץĥȥե༫Τư֤ĤΡ̾͡ߥײ桤£Уֿ͡ޡ	tilting platforms irrespective with rising or falling position, e.g. varying heights between right and left lifting members in case of double supported platform for tilting it.  with oscillating devices provided with platforms per se(Dumping truck with truck bed B60P1/34).[figure]
B66F   7/22  Z	1	0	3F330	B66F   7/22	18	¾ΤΡ̽Ť٤Τऱϡ£ǣץϡ£У	Others (tilting heavy loads B 65 G 7/00, dumping trucks B 60 P 1/32)
B66F   7/24  \	1	1	3F330	B66F   7/24	113	ϤǼξ徺ޤϲߤꤹ뤿Τ	for raising or lowering vehicles by their own power
B66F   7/26  \	1	1	3F330	B66F   7/26	42	ξʬŪˤ夲뤿ΤΡʰưѥ졼ĥ£ƣ	for selective lifting of parts of vehicles (mobile garage jacks B66F 5/00)
B66F   7/28  \	1	1	3F330	B66F   7/28	37	¤κ㡥ٻࡤʪ礭ФĴǤư	Constructional details, e.g. end stops, pivoting supporting members, sliding runners adjustable to load dimensions
B66F   7/28  A	1	0	3F330	B66F   7/28	170	ץåȥեեȲåβټϣ¡ơֿ͡ޡ	platform lift platforms (note: jack platforms 3/08 B, 3/12 F, 3/36) [figure]
B66F   7/28  B	1	1	3F330	B66F   7/28	87	ξβ̤򥹥ݥåȻٻΡֿޡ	locally supporting bottom surface of vehicles [figure]
B66F   7/28  C	1	2	3F330	B66F   7/28	113	󥰥ħ㡥幽¤̹¤ֿ͡ޡ	Features of swing arms, e.g., pivotal connection structures and telescopic structures [FIG]
B66F   7/28  D	1	2	3F330	B66F   7/28	111	ٻι¤㡧󥰥üߤħֿ͡ޡ	Structures of support members, e.g., features of receptacles provided at the swing arm end [FIG]
B66F   7/28  E	1	1	3F330	B66F   7/28	232	ʤȤ˰ưǽʤΡ㡥٤礭ˤ碌ƥ饤ɤѤΥץåȥեࡤΥХ󥹤Ȥ뤿Τβ٤Ѥ뤿ΤΡ͡å졼Υ饤ǥ󥰥եϡ£ǣֿ͡ޡ	at least a portion is movable sideways, e.g. platforms with variable area that slides based on load size, for balancing sideways or helping loading and unloading (note: sliding forks for stacker cranes B 65 G 1/06) [figure]
B66F   7/28  F	1	1	3F330	B66F   7/28	120	ٻߤ㡧٤ߤᡤ٤ζĻ̣͡££ûȡֿ͡ޡ	load gripping members, e.g. slip stoppers, gripping loads, gripping (see B 65 B 3/04 C) [figure]
B66F   7/28  G	1	1	3F330	B66F   7/28	123	ٻ饤㡧ץåȥե˥饳٥ߤΡ̲͡Ѳ٤£ǣ££ûȡֿ͡ޡ	auxiliary members for load carrying slides, e.g. roller conveys provided on platform (See loading and unloading per B 65 G 69/24, B 62 B 3/04 C) [figure]
B66F   7/28  J	1	1	3F330	B66F   7/28	72	ơ֥̲Ѳ٤ѥơ֥ϣ£ǣȡֿ͡ޡ	turntables (See turntables for loading and unloading per B 65 G 69/26) [figure]
B66F   7/28  K	1	1	3F330	B66F   7/28	63	¿ʼֿޡ	multi-step platform [figure]
B66F   7/28  L	1	0	3F330	B66F   7/28	43	ץåȥեե¦̥С¤ֿޡ	structures of side covers for platform lift [figure]
B66F   7/28  M	1	0	3F330	B66F   7/28	231	åͭץåȥեեħ㡧ǼԥåȤοֿ̤͡ޡ	Features of platform lifts with underfloor-embedded jacks, e.g., accommodation lids, draining pits [FIG]
B66F   7/28  Z	1	0	3F330	B66F   7/28	112	¾ΤΡ㡥֥졼	Others, e.g. brakes, legs
B66F   9/00  \	0	0	3F333	B66F   9/00	40	Ѥߤޤϲ٤ŪΤˡФäޤϽŤʪ򾺹ߤ뤿֡ʷʪˤ뤫ʪտ路ƤưޤϰǽʥեȤǤäơʪޤ¾ι¤ʪΰĤ꤫⤦Ĥء뤤Ϥ⤦Ĥ̤ηʪޤϹ¤ʪذưǤ褦ŬѤ줿Σ££졼£á	Devices for lifting or lowering bulky or heavy goods for loading or unloading purposes (mobile or transportable lifts in, or associated with, buildings and specially adapted to be shifted from one part of a building or other structure to another part or to another building or structure B66B 9/16; cranes B66C)
B66F   9/02  \	1	1	3F333	B66F   9/02	118	弰Ѥߤޤϲ٤֡㡥ޤΤΤ	Stationary loaders or unloaders, e.g. for sacks
B66F   9/04  \	2	2	3F333	B66F   9/04	18	հˤưޤ椵	hydraulically actuated or controlled
B66F   9/06  \	1	1	3F333	B66F   9/06	49	Ѥߤ򤷤֤ǡؤޤϤΤˤưǽʤΡ㡥եեȡʼξη££˲ʪ뤿μξӲѤ߲ٲưפˤ뤿ΤΣ£Уʪѥեȥϥɥȥå££	movable, with their loads, on wheels or the like, e.g. fork-lift trucks (vehicle aspects B60-B62; vehicles predominantly for transporting loads and modified to facilitate loading or unloading B60P 1/00; low-lift hand trucks for transporting goods B62B 3/06)
B66F   9/06  A	1	0	3F333	B66F   9/06	516	Ԥ˿ϤˤΡ㡧ʰץեȡեȡ̥͡եȤϡ££ֿ͡ޡ	mainly run by human power, e.g. simple lifts or walkie lifts (low-lifts B 62 B 3/00) [figure]
B66F   9/06  S	1	1	3F333	B66F   9/06	268	ʤĤΡֿޡ	with lifting [means using cylinders [figure]
B66F   9/06  T	1	1	3F333	B66F   9/06	254	ȡݼʤĤΡֿޡ	with winding-type lifting means [figure]
B66F   9/06  B	1	0	3F333	B66F   9/06	663	ߤĤΡ㡧ȼ֡ԥå֡͡γǼϤʬह롤֡फ鲼ι¤֡μμ֡£У£ƣȼ֤ʬȤ	characterized by the installation of an ascending/descending operation board [Example: Overhead operation vehicle/order picker] [Note: The housing of a boom shall be classified to this place. Structures below the boom, Mounting arrangements of the boom on the vehicle body, and B60P3/14, B66F11/04 Overhead operating vehicle shall be assigned as a sub-division.]
B66F   9/06  J	1	1	3F333	B66F   9/06	431	̤륬ɤˤĤ椬ߤΡ㡧ޥȼ͡Ϥ֤ϡţãֿ͡ޡ	operating platforms rising and falling along expanding or contracting guide, e.g. mast type (note: ladder trucks E 06 C 5/) [figure]
B66F   9/06  K	1	1	3F333	B66F   9/06	311	ưʤ֡ü椬Ρ㡧󥯼ֿ͡ޡ	operation platform provided at end of revolving or bending boom, e.g. linkage type [figure]
B66F   9/06  P	1	2	3F333	B66F   9/06	399	ä˥֡ब򺹤ƤΡ㡧ѥ󥿥ռֿ͡ޡ	crossing booms in particular, e.g. pantograph or scissors type [figure]
B66F   9/06  L	1	1	3F333	B66F   9/06	772	̤֡ü椬Ρ㡧ƥ쥹ԥå֡༰ֿ͡ޡ	operating platforms provided at end of telescopic boom, e.g. telescopic boom type [figure]
B66F   9/06  N	1	2	3F333	B66F   9/06	155	ä˥֡बľ˿̤ΡߺѤΥץåȥե­졤ţǣֿ͡ޡ	booms expanding and contracting vertically in particular (note: scaffolding provided with platforms for construction work E 04 G 1/20) [figure]
B66F   9/06  M	1	1	3F333	B66F   9/06	948	漫Ρ̱ž֤ϡ£ƣԡֿ͡ޡ	operation of rising and falling platforms per se (operation controls B 66 F 9/24 T) [figure]
B66F   9/06  Q	1	2	3F333	B66F   9/06	215	˥졼δ֤ʻߤΡֿޡ	with additional winding devices provided on operation platform [figure]
B66F   9/06  W	1	2	3F333	B66F   9/06	235	˥եβ֤ʻߤΡ̥եʳΥޥ˥ԥ졼βʤޤֿ͡ޡ	with additional docking devices provided such as forks on operation platform (including docking means excluding forks such as manipulators or clamps) [figure]
B66F   9/06  X	1	2	3F333	B66F   9/06	258	οʿǤλĴᡤ㡥ľޤ󡤿ʿ⤽ξΥľưֿ͡ޡ	(adjusting attitude of operation platform on horizontal plane, e.g. turning around vertical axis, linear motion by short distance on horizontal plane) [figure]
B66F   9/06  Y	1	2	3F333	B66F   9/06	526	οľǤλĴᡤ㡥ʿޤ󤹤ʤʿݻʡľǤξΥľưֿ͡ޡ	(adjusting attitude of operation platform on vertical plane, e.g. turning around horizontal axis, linear motion by short distance on vertical plane) [figure]
B66F   9/06  U	1	1	3F333	B66F   9/06	115	椬Τ㤯ʤΡ㡧¸Ѻȼ̣֡͡ţģȡֿ͡ޡ	operation platforms that can be positioned lower than body, e.g. trucks for inspecting bridges (see E 01 D 21/00)[figure]
B66F   9/06  V	1	1	3F333	B66F   9/06	85	ؤҡֿޡ	auxiliary ladders for getting in operation platform [figure]
B66F   9/06  C	1	0	3F333	B66F   9/06	74	եեȤ¾κȼ֤ȹ礻Ρֿޡ	Combination of a fork lift with other work vehicle [figure]
B66F   9/06  E	1	1	3F333	B66F   9/06	64	ե饤ߥ󥰡եեȡե饤ߥ󥰥졼󡤣£ãξΰλ塤£ӣֿ͡ޡ	self-climbing forklifts (note: Self-climbing cranes B 66 C 23/32, lifting a portion of vehicle B 60 S 9/00) [figure]
B66F   9/06  F	1	1	3F333	B66F   9/06	106	졼󡦥Ȥȹ礻ֿޡ	combinations with crane and winch [figure]
B66F   9/06  G	1	1	3F333	B66F   9/06	112	ȥ饯ѥե֤ĥȥ饯£ģȥ饯񡤣£	rear forks for tractors (note: tractors with lifting devices B 62 D 49/02, farming tools for tractors A 01 B 63/108)
B66F   9/06  H	1	1	3F333	B66F   9/06	59	ȥ饯ѥեȥե	front forks for tractors
B66F   9/06  R	1	1	3F333	B66F   9/06	27	٥Ȥȹ礻̥٥˴ϢӽСѤϡ£ǣ٥֡£ǣֿ͡ޡ	combinations with conveyors (discharging or relaying related to conveyors B 65 G 47/34 to 47/96, carts with conveyors B 65 G 47/52101 A) [figure]
B66F   9/06  Z	1	0	3F333	B66F   9/06	397	¾Τ	Others
B66F   9/065  \	2	2	3F333	B66F   9/065	23	ޥȤ⤿ʤΡʼؾޤϥˤդ줿졼ΰưå£ƣˡΣ	non-masted (mobile jacks of the garage type mounted on wheels or rollers B66F 5/00) [3]
B66F   9/065  A	2	0	3F333	B66F   9/065	113	շ󥯤ĤΡֿޡ	with quadrilateral linkages [figure]
B66F   9/065  B	2	0	3F333	B66F   9/065	45	󥯤ȥޥȤʻѤΡֿޡ	combinations of linkage and mast [figure]
B66F   9/065  C	2	0	3F333	B66F   9/065	137	ƥ쥹ԥå֡ĤΡֿޡ	with telescopic booms [figure]
B66F   9/065  Z	2	0	3F333	B66F   9/065	869	¾ΤΡ٥ţƣ	Others (note: Shovel loaders E 02 F 3/36)
B66F   9/07  \	2	2	3F333	B66F   9/07	138	鲰زѤߤ֡㡥å졼Σ	Floor-to-roof stacking devices, e.g. stacker cranes, retrievers [3]
B66F   9/07  A	2	0	3F333	B66F   9/07	475	ȡѾ̥å졼βѥ饤ǥ󥰥եϡ£ǣֿ͡ޡ	rising and falling platform for docking or operation (sliding forks for docking with stacker cranes B 65 G 1/06) [figure]
B66F   9/07  C	2	0	3F333	B66F   9/07	471	Էå졼Υե졼ࡤֿޡ	frames of floor running stacker cranes, guide [figure]
B66F   9/07  E	2	0	3F333	B66F   9/07	209	߲ٻå졼Υե졼ࡤŷԥ졼βʪѥӡ£ãֿޡ	frames or guides for suspended stacker cranes (note: beams for load engaging elements of ceiling cranes B 66 C 17/04) [figure]
B66F   9/07  G	2	0	3F333	B66F   9/07	205	šưư̼ξν֤ϡ£ֿ̣͡ޡ	power feeding, driving, transmitting (current collectors for vehicles B 60 l 5/00) [figure]
B66F   9/07  J	2	0	3F333	B66F   9/07	97	ɿ˾ס̥졼ϡ£ãߤᡤ£ãֿޡ	anti-vibration or damping (damping control for cranes B 66 C 13/22, braces B 66 C 13/06) [figure]
B66F   9/07  N	2	0	3F333	B66F   9/07	251	ָСֿޡ	detecting positions or stop control [figure]
B66F   9/07  L	2	0	3F333	B66F   9/07	71	Сɻֿޡ	control for preventing tilting or falling [figure]
B66F   9/07  S	2	0	3F333	B66F   9/07	133	򥷥ƥ̼ϣ£ǣ٥£ǣƣͣӤϣ£ѣֿ͡ޡ	docking system control (main B 65 G 1/00, conveyor control B 65 G 43/, FMS B 23 Q 41/) [figure]
B66F   9/07  Q	2	0	3F333	B66F   9/07	32	٥ȼĤΡֿޡ	with conveyors [figure]
B66F   9/07  Z	2	0	3F333	B66F   9/07	111	¾	Others
B66F   9/075  \	2	2	3F333	B66F   9/075	35	¤ħӺΣ	Constructional features or details [3]
B66F   9/075  A	2	0	3F333	B66F   9/075	721	եեȤͭʼΤħ̲ξη£Уֿ͡ޡ	Body features inherent in forklifts (shapes of loading vehicles: B60P1/00) [FIG]
B66F   9/075  C	2	1	3F333	B66F   9/075	876	ʡ̥󥿡ȡХåƥ꡼̥͡󥿡Ȱ̡£ģ졼Υ󥿡ȡ£ãХåƥ꡼ȣͣХåƥ꡼򴹣£ˣţ£ֿ̣͡ޡ	balancing means (counterweights, battery) (counterweights in general B 62 D 49/08, counterweights for cranes B 66 C 23/72, 74, batteries H 01 M 7/10, replacing batteries B 60 K 1, charging B 60 L 15/) [figure]
B66F   9/075  E	2	1	3F333	B66F   9/075	857	žʡ̲ߴ͢ѱž£ģ졼ž£ãžʣ£Σȥ饯žʣţƣʣ£Σֿ͡ޡ	cockpits (cockpits for transporting cargoes B 62 D 33/06, cockpits for cranes B 66 C 13/54, cockpits B 62 N 1/02, cockpits for tractors E 02 F 9/16, seats B 60 N1/-) [figure]
B66F   9/075  G	2	1	3F333	B66F   9/075	358	إåɥɡ̥إåɥɰ̤ϡ£ģֿ͡ޡ	head guards (head guards in general B 62 D 49/00) [figure]
B66F   9/075  J	2	1	3F333	B66F   9/075	213	ѻ볦ʡ㡨ߥ顼̼͡ξξ£ѣξäŬ礹֣ƣӣ졼ξ֡£ãŪǧ£ңֿ͡ޡ	auxiliary means for securing docking sight, e.g. mirrors (illuminating vehicles B 60 Q 1/02, floodlight devices F 21 M7/00, illuminating devices for cranes B 66 C 13/00, optical recognition B 60 R 1/00) [figure]
B66F   9/075  L	2	1	3F333	B66F   9/075	538	ȥꥬء̥ȥꥬ£ӣ졼Υȥꥬ£ãӣƣֿͣ͡ޡ	outriggers, auxiliary wheels (outriggers B 60 S 9/00, outriggers for cranes B 66 C 23/78, safety fences F 16 M 11/00) [figure]
B66F   9/075  N	2	0	3F333	B66F   9/075	55	ȥɥ뷿եեȡ̥꡼ΤΤ̥͡ƥɥ륭ꥢʥƥѡˤϡ£ǣֿ̡͡ޡ	straddle forklift trucks (excluding reaching type) (straddle carriers (for containers) B 65 G 63/00 L) [figure]
B66F   9/075  Z	2	0	3F333	B66F   9/075	573	¾Τ	Others
B66F   9/08  \	3	3	3F333	B66F   9/08	23	ޥȡɡΣ	Masts; Guides; Chains [3]
B66F   9/08  B	3	0	3F333	B66F   9/08	51	ޥΥɡ㡥ʳˤ륹饤ɥɡֿ͡ޡ	Mast guides, e.g. straddle guides excluding roller [figure]
B66F   9/08  R	3	1	3F333	B66F   9/08	65	ޥȥ졼Υˤ륬ɡ㡥ȥ졼Ȥȹ礻¤͡꡼šףֿͥ͡ޡ	roller guides such as mast rails, e.g. combinations of rollers and rails (note: 9/10 E takes precedence for reach type and 9/18 for clamp type, respectively) [figure]
B66F   9/08  S	3	2	3F333	B66F   9/08	36	ä˥ޥȥ졼ȥȤ̤ηħĤΡ㡥ơ̤ĥ졼ȥȤȹ礻ֿ͡ޡ	Characterised particularly by the shapes of the contact surface of the mast rails or the like and the rollers, e.g., the combination of tapered rails and rollers [FIG]
B66F   9/08  T	3	2	3F333	B66F   9/08	23	ä˥ޥȥ졼ޤϥ̤κħĤΡ㡥Ų̤ĥ졼롤ɽ̤ĥֿ͡ޡ	Characterised particularly by the materials of the contact surfaces of the mast rails, the rollers or others, e.g., rails with hardened surfaces and rollers with elastic surfaces [FIG]
B66F   9/08  U	3	2	3F333	B66F   9/08	102	ޥȥ졼ưΥĥ䷹Фɻߤ뤿ղŪʤĤΡ㡥饤䥷ʻѡղŪɥʻѡ͡ɥ˥ɥ¢¤ˤĤƤϡѤֿͥ͡ޡ	with additional means for preventing wobbling of sliding members such as mast rail, e.g. combination of sliders and shims, combination of additional side rollers (note: 9/08 Q takes precedence for structures side rollers built in guide rail) [figure]
B66F   9/08  Q	3	2	3F333	B66F   9/08	97	ɥμջٻ¤㡥ټΥ졼ؤθ塤μɥ¢륯ι¤ֿ͡ޡ	mount support structures of guide rails, e.g. adhering posts to rails, roller bearings, so called cross crawlers with built in side rollers) [figure]
B66F   9/08  V	3	2	3F333	B66F   9/08	58	ޥȥ졼Τι¤ħ㡥ɥ졼ܹ¤߸̾ü̷͡¿ʥޥȤϡФΥޥȤϡʤֿͥ͡ޡ	Features of mast rails or the like per se, e.g., welded structures of guide rails and special cross-sectional shapes like arcs) (note: for multi-masts, 9/08P takes precedence and for mono-masts, 9/08J takes precedence)  [FIG]
B66F   9/08  G	3	0	3F333	B66F   9/08	158	볦θ㡥ޥȤζ᤯ܤΥեȥߤ¤ե꡼ӥ塼ޥȡֿ͡ޡ	improving sight, e.g. two lift cylinders arranged nearby mast, so called free view mast [figure]
B66F   9/08  H	3	0	3F333	B66F   9/08	76	ե꡼եȡޥȤξ徺ȼʤ鷺ե̾徺뤿ι¤ѥեե꡼ޥȤˤĤƤϣСѡä˥۴ɤħΤϣġŤֿͥ͡ޡ	Free lifts (note: structures for lifting forks by a certain height without raising the masts; for the so-called full free masts with an exclusive cylinder: 9/08P and Q; and for those that are characterised by cylinders and piping in particular, 9/22D and E take precedence) [FIG]
B66F   9/08  P	3	0	3F333	B66F   9/08	92	ʰʾޥȤͭ¿ʥޥȡäħľϡĤֿͥ͡ޡ	Multi-stage masts with three or more stages (note: if characterised by hydraulic mechanisms, 9/22D takes precedence) [FIG]
B66F   9/08  W	3	1	3F333	B66F   9/08	32	ä¿ʥƥ쥹ԥåޤ¿ʥޥȤι¤¿ʥƥ쥹ԥåħϡŤֿͥ͡ޡ	Structures of multi-stage masts, particularly those including multi-stage telescopic hydraulic cylinders (note: for the features of multi-stage telescopic hydraulic cylinders, 9/22E takes precedence) [FIG]
B66F   9/08  J	3	0	3F333	B66F   9/08	48	ܤΥޥȤˤٻ㡥Υޥȡ͡ǡֻ볦θפФֿͥ͡ޡ	Supporting with only one mast, e.g. mono-mast (note: Takes precedence to 9/08 G improving sight) [figure]
B66F   9/08  K	3	0	3F333	B66F   9/08	46	᲼ߤԤʤޥȡֿޡ	over-falling masts [figure]
B66F   9/08  L	3	0	3F333	B66F   9/08	73	ʣȤβʤĤΡ㡥ʣȤΥޥȡեֿ͡ޡ	with multiple sets of docking means, e.g. multiple sets of masts, forks [figure]
B66F   9/08  M	3	0	3F333	B66F   9/08	148	ޥμաٻʬΩ㡥ޥȲΥեȥؤμչ¤򴹤ΤΥޥȤʬֿ͡ޡ	mounting, supporting, disassembling or assembling masts, e.g. mounting structures to front axle at bottom of mast, disassembling mast for replacing rollers [figure]
B66F   9/08  N	3	0	3F333	B66F   9/08	209	ޥؤΥեȥμաٻե꡼եȤΤΤΣȤͥ衤Τħֿͥ͡ޡ	Mounting of lift cylinders to masts and their supports (note: for free lifts, 9/08 H takes precedence; for the features of the cylinders themselves, 9/22 does) [FIG]
B66F   9/08  C	3	0	3F333	B66F   9/08	256	󡤥ץåȡ㡥եȥι¤⡤ü幽¤ֿ͡ޡ	Chains or sprockets, e.g. structures of lift chains, guides, fixing structures for ends [figure]
B66F   9/08  D	3	0	3F333	B66F   9/08	82	ޥξ֤οľޤեοľϣˡ꡼ȤԤʤޥȤϣǡɥ꡼եϣֿ͡͡ޡ	turning rising and falling devices such as masts around vertical axis (note: turning forks around vertical axis 9/14 K, reaching and turning masts 9/10 G, side reach forks 9/14 M) [figure]
B66F   9/08  E	3	0	3F333	B66F   9/08	252	ޥξ֤巹ư㡥ޥȥȡ͡ȥ۴ɤħϡǡϣš桤եΥޥȤФȤϡֿ͡ޡ	Back and forth tilting of lifting devices such as masts, e.g., mast tilt (note: features of tilt cylinders and piping: 9/22G; control: 9/24E; tilting of frames, forks, or the like relative to masts: 9/16) [FIG]
B66F   9/08  F	3	0	3F333	B66F   9/08	363	ۡ۴ɡޤι¤㡥ޥȤˤۡסˤۡΰ⡤꡼եȤεť֥ΰ͡ϩޤǼ줿۴ɤϣƱϣֿͥ͡ޡ	piping or wiring structures for hydraulic hoses, guides, e.g. guiding hoses with hose pulleys provided on mast, guiding power feed cables for reach lifts (note: 9/22 takes precedence to piping shown in circuits and 9/24 for wiring of the same) [figure]
B66F   9/08  Z	3	0	3F333	B66F   9/08	124	¾ΤΡ㡧եβ¥ȥĥѡֿ͡ޡ	Others, e.g. lower limit stoppers for forks [figure]
B66F   9/10  \	4	4	3F333	B66F   9/10	24	ȥåФƿʿ˰ưǤΡΣ	movable in a horizontal direction relative to truck [3]
B66F   9/10  A	4	0	3F333	B66F   9/10	299	֤οʹԸ˥ޥȤहΡ㡧ȥɥ롦꡼եȡ䡼꡼եȡֿ͡ޡ	masts advancing or retracting along running direction of vehicle, e.g. straddle or reach lifts, rear reach lifts [figure]
B66F   9/10  C	4	0	3F333	B66F   9/10	103	ֿʹľ򤷤ƥޥȤहΡ㡧ɡֿ͡ޡ	masts advancing or retracting perpendicularly from running direction of vehicle, e.g. side loaders [figure]
B66F   9/10  E	4	0	3F333	B66F   9/10	76	ޥȤΰ㡧졼롤꡼쥰ֿ͡ޡ	Guidance for the mast [Example: Rail, reach leg and roller] [figure]
B66F   9/10  G	4	0	3F333	B66F   9/10	50	꡼ȤԤʤޥȡ㡧ɥǥ󥰥ޥȡֿ͡ޡ	reaching and turning masts, e.g. side loading masts [figure]
B66F   9/10  Z	4	0	3F333	B66F   9/10	237	¾ΤΡ㡧ΥޥȤʤƻҼեȼ֡ʬֿ͡ޡ	Others, e.g. severed masts, that is, so called double lift cars  note that some of them are classified in 9/10 A 12. [figure]
B66F   9/12  \	3	3	3F333	B66F   9/12	14	ץåȥեࡨե¾βʪٻޤĻΣ	Platforms; Forks; Other load-supporting or load-gripping members [3]
B66F   9/12  C	3	0	3F333	B66F   9/12	82	ʿ̾ʪ㡧ץåȥեֿ͡ޡ	flat loading members, e.g. platform [figure]
B66F   9/12  A	3	1	3F333	B66F   9/12	292	եޤϥץƥ饤ǥ󥰥եϡ£ǣСѡֿ͡ޡ	Forks or platen (note: sliding forks B 65 G 1/04 P, Q) [figure]
B66F   9/12  D	3	2	3F333	B66F   9/12	231	եޤϥץƥæߤ˼դ㡧ե͡եæü쥢åȤϣڡХåȤϣ¡Сֿ͡ޡ	auxiliary docking members that can be freely attached to or detached from forks or platens, e.g. sheath forks (note: special attachments for forks 9/12 Z, buckets 9/12 B to P) [figure]
B66F   9/12  E	3	1	3F333	B66F   9/12	56	̾ߤʪݻʡ㡥ʪȥåѡ͡ӥ饤ϣ£ƣáֿ͡ޡ	load supporting means provided on platform, e.g. load stoppers (note: stabilisers  B 66 F 9/18 C) [figure]
B66F   9/12  F	3	2	3F333	B66F   9/12	168	ä˥եߤʪݻʡֿޡ	means for holding loads provided on forks in particular [figure]
B66F   9/12  G	3	1	3F333	B66F   9/12	71	̤ߤٰưʡ㡥٥եץåȥեֿ͡ޡ	auxiliary load moving means provided on platform, e.g. platform with conveyor [figure]
B66F   9/12  H	3	2	3F333	B66F   9/12	56	ä˥եߤٰưʡֿޡ	means for moving loads provided on forks in particular [figure]
B66F   9/12  B	3	1	3F333	B66F   9/12	88	ХåȾޤȢβٻٻʡ浪ںѣţơֿ͡ޡ	means for holding bucket or boxy loads provided on forks (note: for digging or transporting sand and soil E 02 F) [figure]
B66F   9/12  J	3	2	3F333	B66F   9/12	92	˲ưƲ٤ӽФԤʤΡ㡧ŤޤϾߤѤХåȿžֿ͡ޡ	discharging loads by revolving back and forth, e.g. overrevolving bucket using of deadweight or rising and falling [figure]
B66F   9/12  K	3	3	3F333	B66F   9/12	44	ˤѶŪ˲ưԤʤΡ㡧եΥȥѡֿ͡ޡ	active revolving with hydraulic cylinders, e.g. using of tilt cylinder for forks [figure]
B66F   9/12  L	3	2	3F333	B66F   9/12	25	¦˲ưƲ٤ӽФԤʤΡֿޡ	discharging loads by revolving sideways [figure]
B66F   9/12  M	3	2	3F333	B66F   9/12	34	̤򳫤Ʋ٤ӽФԤʤΡֿޡ	discharging loads by opening bottom surface [figure]
B66F   9/12  N	3	2	3F333	B66F   9/12	34	٤μΤ¦̤ĲǽʤΡ㡧󥰥Хåȡֿ͡ޡ	side surface can be opened and closed for receiving loads, e.g. wing buckets [figure]
B66F   9/12  P	3	2	3F333	B66F   9/12	60	եؤæǽʥХåȿչ¤ֿޡ	bucket mounting structure, allowing detaching/attaching to forks [figure]
B66F   9/12  Q	3	0	3F333	B66F   9/12	155	ʤٻ뾺㡧åեȥ֥饱åȡ͡߼ʤϣֿ͡ޡ	rising and falling members supporting docking means, e.g. carriages, lift brackets, (note: rising and falling means 9/08) [figure]
B66F   9/12  R	3	1	3F333	B66F   9/12	302	ؤβʤμա㡧եåԥ󡤥ե󥬡С͡饤ɲǽʼդϣֿ͡ޡ	mounting or locking of docking means to rising and falling members, e.g. fork lock pins, finger bars (note: mounts that can be slid 9/14) [figure]
B66F   9/12  S	3	1	3F333	B66F   9/12	119	ߤ줿ʪ̻ٻ㡥Хå쥹ȡ͡ץåϣ¡ӥ饤ϣáֿ͡ޡ	members for supporting rear of loads provided on rising and falling members, e.g. back rests (note: pushers 9/18 B, stabilisers 9/18 C) [figure]
B66F   9/12  T	3	1	3F333	B66F   9/12	105	̥åͤæǽ˼դ¾°ʤü쥢åȡ㡥󥯥꡼ȥߥåȡåץ쥹åȡֿ͡ޡ	Special attachments that can be freely attached to and detached from rising and falling member (carriage) not classified in other sections, e.g. concrete mixer attachments, slapless attachments [figure]
B66F   9/12  U	3	1	3F333	B66F   9/12	284	եæǽ˼դ¾°ʤü쥢åȡ㡥ƻϩѥ֥饷åȡ͡եϣġֿ͡ޡ	Special attachments freely attached to and detached from forks that are not classified in other sections, e.g. brush attachments for cleaning roads (note: sheathe forks 9/12 D) [figure]
B66F   9/12  Z	3	0	3F333	B66F   9/12	136	¾Τ	Others
B66F   9/14  \	4	4	3F333	B66F   9/14	2	žޤϲԱưΤ˲˰ư㡥ưǤΡΣ	laterally movable, e.g. swingable, for slewing or transverse movements [3]
B66F   9/14  A	4	0	3F333	B66F   9/14	189	椬Фֶ˿ʿưΡ㡥ե󥬡СΥɥեֿ֡͡ޡ	frames moving along width direction of rising and falling member, e.g. side shifting device for finger bar [figure]
B66F   9/14  E	4	0	3F333	B66F   9/14	57	ٻݻФֶ˿ʿưΡ桤ʪٻξԤΰưԤʤΤϣšƤͥ衣饤ɼפϣֿ͡ޡ	load holders moving horizontally along width direction of vehicle (note: E or F takes precedence to those that move both frame and load support.  Sliding clamps 9/18 A) [figure]
B66F   9/14  F	4	1	3F333	B66F   9/14	231	ä˲ʪݻȤΥեǤΡֿޡ	load holders being a pair pf forks in particular [figure]
B66F   9/14  G	4	2	3F333	B66F   9/14	132	ä˥եհˤľܶưΡֿޡ	forks directly driven by hydraulic cylinder in particular [figure]
B66F   9/14  B	4	0	3F333	B66F   9/14	111	椬Ĺ˿ʿưΡޥȤμĹʿưϡ͡㡥꡼եֿ͡ޡ	frames moving horizontally along lateral direction of vehicle (note: horizontal motion of masts along lateral direction of vehicle 9/10), e.g. reach forks  [figure]
B66F   9/14  H	4	0	3F333	B66F   9/14	105	ʪݻФĹ˿ʿưޤϿ̤Ρ㡥̥ס͡ޤϡΡֿ͡ޡ	load supports moving horizontally or expanding and contracting relative to frame along lateral direction of vehicle, e.g. telescopic clamp (note: turning claws 9/18 N) [figure]
B66F   9/14  J	4	1	3F333	B66F   9/14	109	ä˲ʪݻեǤΡå졼ѥ饤ɥեϡ£ǣСѡ͡㡧̼ե饤ɥեֿ͡ޡ	load holders being forks in particular (note: slide forks for stacker cranes B 65 G 1/04 P, Q), e.g. telescopic forks, slide forks [figure]
B66F   9/14  K	4	0	3F333	B66F   9/14	120	ޤϲʪݻФľޤưޤϲưΡޥȤ󡤣ġ͡㡥žơֿ֥͡ޡ	frames or load holders oscillating or revolving around vertical axis relative to rising and falling member (note: revolving masts 9/08 D), e.g. revolving tables [figure]
B66F   9/14  M	4	0	3F333	B66F   9/14	163	ʪݻФֶʿưȿľޤβưȤԤʤΡ㡧ɥ꡼ե͡ޥȤֶहΤϡáֿ͡ޡ	load holders moving horizontally along width direction of vehicle and revolving along vertical axis relative to rising and falling member, e.g. side reach forks (note: masts advancing or retracting toward width direction of vehicle 9/10 C) [figure]
B66F   9/14  N	4	0	3F333	B66F   9/14	27	ʪݻФֶʿưȼĹʿޤβưȤԤʤΡ㡧ȿžեɥ꡼եȡ͡ХåȤ¦ȿžϡֿ̡͡ޡ	load holders moving horizontally along width direction of vehicle and revolving on horizontal axis along lateral direction of vehicle relative to rising and falling member, e.g. side reach forks  with overrevolving forks (note: overrevolving of buckets to
B66F   9/14  P	4	0	3F333	B66F   9/14	90	椬ФĹʿޤưޤϲưΡ㡧ưåֿ͡ޡ	frames oscillating or revolving around horizontal axis along lateral direction of vehicle relative to rising and falling member, e.g. oscillating carriages [figure]
B66F   9/14  Q	4	1	3F333	B66F   9/14	143	ä˲椬žưʡ㡥⡼ͤˤ³ǽʤΡ㡧ĥȡֿ͡ޡ	frames that can be rotated continuously in one direction being as rotary driving means in particular, e.g. hydraulic motor (e.g. turrets) [figure]
B66F   9/14  R	4	0	3F333	B66F   9/14	61	ʪݻФĹʿޤ˲ưΡ㡧󥰥ե͡βưȼʤϣҤСѤͥ衣ХåȤ¦ȿžϡֿ̡͡ޡ	load holders revolving around horizontal axis along lateral direction of vehicle relative to frame, e.g. swing forks (note: R takes precedence to P or Q when frame revolution is involved.  Overrevolving of bucket in sideways 9/12 L) [figure]
B66F   9/14  Z	4	0	3F333	B66F   9/14	28	¾ΤΡ㡧ФΥե߹⤵Ĵֿ͡ޡ	Others, e.g. adjusting mutual heights between a pair or forks [figure]
B66F   9/16  \	4	4	3F333	B66F   9/16	36	ޥȤФƷФǤΡΣ	inclinable relative to mast [3]
B66F   9/16  A	4	0	3F333	B66F   9/16	106	ޥȤޤϾФƲ椬ֶʿޤưǽʤΡ㡧֡͡ޥȤΥȤϡšֿ͡ޡ	frames that can be revolved around horizontal axis along width direction of vehicle relative to rising and falling member, e.g. tilting device (note: tilting of masts 9/08 E) [figure]
B66F   9/16  B	4	0	3F333	B66F   9/16	135	ФƲʪݻबֶʿޤ˲ưǽ˼դ줿ΡžݲǽʥХåȤϡʡ͡㡧ҥ󥸥ɥեֿ͡ޡ	load holding members that are mounted to permit revolving around horizontal axis along width direction of vehicle relative to frame (note: buckets that can be fallen back and forth 9/12 J), e.g. hinged forks [figure]
B66F   9/16  C	4	1	3F333	B66F   9/16	49	ä˲ʪݻब椫ޤꤿ߲ǽȤʤĤƤΡ㡧ޥեֿ͡ޡ	load holding members that can be folded in midway in particular, e.g. folding forks [figure]
B66F   9/16  D	4	0	3F333	B66F   9/16	34	ưѥ奨μչ¤ֿޡ	mounting structures for rotary actuators [figure]
B66F   9/16  E	4	0	3F333	B66F   9/16	44	ʪݻޤϲ椬̻ٻ㡧Хå쥹ȡͤϢưƼֶʿޤ˲ưΡֿޡ	load holding members or frames that can be revolved around horizontal axis along width direction of vehicle  while being interlocked to rear supporting members, e.g. back rest [figure]
B66F   9/16  F	4	0	3F333	B66F   9/16	41	ʪݻڤӲ椬ֶʿޤβưޤࣲʾμͳ٤Ѱ̲ǽʤΡɥ꡼եϡֿ͡͡ޡ	load holding members and frames that can be deflected with two or more degrees of freedom that includes revolving around horizontal axis along width direction of vehicle (note: side reach forks 9/14 M) [figure]
B66F   9/16  G	4	1	3F333	B66F   9/16	48	ä˲ʪݻڤӲ椬ֶʿڤӤľ򤹤뼴ޤˤȤ˲ưǽʤΡ㡧žץ֡͡å֡ѡֿ͡ޡ	load holding members and frames that can be revolved both around horizontal and vertical axes along width direction of vehicle, e.g. rotary clamp tilting device (note: turret devices 9/14 Q) [figure]
B66F   9/16  Z	4	0	3F333	B66F   9/16	8	¾㡥եΥȤѤؤλ塤եΥȤѤʪʤβĤ֤	Others, e.g. lifting front wheels using tilting of forks, collapsing articles using tilting of forks
B66F   9/18  \	4	4	3F333	B66F   9/18	18	ʪĻޤݻʡΣ	Load gripping or retaining means [3]
B66F   9/18  A	4	0	3F333	B66F   9/18	237	ư¦ˤ륹饤ɼ֡㡥ɥեȥסֿ͡ޡ	Slide clamp devices with slide guide of arm provided on its side surface, e.g. side shift clamps [figure]
B66F   9/18  B	4	0	3F333	B66F   9/18	201	βư¦ˤ󥯼֡㡥륯סեֿ͡ޡ	Linkage clamp devices with revolving pivot of arm provided on its side surface, e.g. roll clamps log forks [figure]
B66F   9/18  G	4	0	3F333	B66F   9/18	105	ưξ岼ˤ륹饤ɼ֡㡥߲饤ɥסֿ͡ޡ	Slide clamp devices with arm slide guides provided along its sliding directing e, e.g. suspension slide clamp [figure]
B66F   9/18  H	4	0	3F333	B66F   9/18	82	βưξ岼ˤ󥯼֡㡥߲󥯥סֿ͡ޡ	Linkage clamp devices with arm slide guides provided along its sliding direction, e.g. suspension slide clamp [figure]
B66F   9/18  J	4	0	3F333	B66F   9/18	117	ä˰ȤΥह٤Ƥưǽʥ󥯼ֿ֡ޡ	Linkage clamp devices of which all arms can be revolved in particular [figure]
B66F   9/18  F	4	0	3F333	B66F   9/18	88	ɥ̥֥ˤΡ졼ѡ£ãֿ͡ޡ	by drum rib clamp method (note: for cranes B 66 C 1/62) [figure]
B66F   9/18  K	4	0	3F333	B66F   9/18	34	ץζ̤¤ħΰưˤʤΡֿ͡ޡ	Structural features common to clamp arms (note: not related to moving type of arms) [figure]
B66F   9/18  L	4	1	3F333	B66F   9/18	87	Ļ줿ʪʤưɤĻμ¤ˤ뤿ղüʡ㡥ʪʤβ̤ٻʡֿ͡ޡ	additional means for securing gripping by preventing falling or moving of gripped articles, e.g. auxiliary means supporting bottom surface of articles [figure]
B66F   9/18  M	4	2	3F333	B66F   9/18	147	äʪʤηˤ碌ѷޤѰ̲ǽĻ̡ӥ饤ѥåɤϡ£ƣС͡㡥ץեưޡֿ͡ޡ	gripping surfaces that can be deformed or deflected to adapt profiles of articles in particular (note: stabiliser pads B 66 F 9/18 P), e.g. elastic clamp face, oscillating clamp claw [figure]
B66F   9/18  N	4	1	3F333	B66F   9/18	124	Ļ줿ʪʤλޤϰ֤Ѥ뤿ղüʡּΤ󡤲Ԥϣ͡㡥󥯥ޡֿ͡ޡ	additional means for changing attitude or position of gripped articles (note: turning or traversing of clamp devices per se 9/14), e.g. turning clamp claws [figure]
B66F   9/18  C	4	0	3F333	B66F   9/18	229	ե˺֤줿ʪʤꤵ뤿ղŪݻʡ㡥ɥӥ饤͡եߤΡšХå쥹ȡӡʪʤȿžΤΥեȥפȤȹ礻֡ե¡ֿ͡ޡ	additional holding means for stabilising articles loaded on platform, e.g. load stabilisers (note: provided on forks 9/12 E, back rests 9/12 S, combinations of forks and clamps for overturning articles 9/18V, log forks 9/18 B) [figure]
B66F   9/18  P	4	1	3F333	B66F   9/18	63	ʪʤηˤ碌Ѱ̤ޤѷǽʥӥ饤ѥåɤħĤΡץؤŬѤϡֿ͡͡ޡ	characterised by stabiliser pads that can be deflected or deformed to adapt profiles of articles (note: applications for clamp arms 9/18 M) [figure]
B66F   9/18  X	4	1	3F333	B66F   9/18	58	ư֤ˤԺư֤زưǽʥӥ饤ħĤΡֿޡ	characterised by stabilisers - arms that can be shunted by revolving from operating position to resting position [figure]
B66F   9/18  Q	4	1	3F333	B66F   9/18	46	ĤȤ㡥ȡͤѤΡ㡥褱ʤֿ͡ޡ	using of flexible materials, e.g. sheets, ropes, (e.g. rain covers) [figure]
B66F   9/18  D	4	0	3F333	B66F   9/18	104	ݤޤ߾֡㡥ȥܥåߡֿ͡ޡ	hook or suspension devices, e.g. suspending carton boxes [figure]
B66F   9/18  R	4	1	3F333	B66F   9/18	162	ॢåȡֿޡ	Ram attachments [figure]
B66F   9/18  S	4	1	3F333	B66F   9/18	162	ƥʥץååȡ졼ѡ£ḁ̃͡ƥѥȥɥ륭ꥢ£ǣֿ̡͡ޡ	Container spreader attachments (note: for cranes B 66 C 1/66) (straddle carriers for containers B 65 G 63/00 L) [figure]
B66F   9/18  W	4	2	3F333	B66F   9/18	76	Ҹƥʥץåֿޡ	Single head container spreaders [figure]
B66F   9/18  T	4	1	3F333	B66F   9/18	163	եȥåޤϥե˼դƾߤ롤ΩޤϻʤʤեååȡΩޤϻʤͭեåʤ졼󵡹ȥեȤʻѤϡơ졼Υեåϡ£ãֿ͡ޡ	Hook attachments without independent winding or lifting means that rise and fall after being mounted on lift carriage or fork (note: hooks with independent winding or lifting means, that is, combinations of crane mechanisms and forks 9/06 F, crane hooks B
B66F   9/18  E	4	1	3F333	B66F   9/18	157	ˤΡ㡥伧ѤΡ͡졼ѡ£ãֿ͡ޡ	by sucking, e.g. using of vacuum or magnetism (note: for cranes B 66 C 1/02) [figure]
B66F   9/18  U	4	1	3F333	B66F   9/18	92	󥯥꡼ȥ֥å㡥Υ֥å߾֡¾ʬͥ衤졼ѡ£ãֿ̡͡ޡ	Lifting devices for concrete blocks, e.g. wedge blocks (note: takes precedence to other classifications per 9/18, for cranes B 66 C 1/42 L) [figure]
B66F   9/18  V	4	0	3F333	B66F   9/18	135	եȥפȤʻѤޤϷѡ㡥ʪʤȿžΤΤΡ͡ӥ饤ϡáֿ͡ޡ	combinations of forks and clamps or serving for both functions, e.g. for overturning articles (note: stabilisers 9/18 C) [figure]
B66F   9/18  Z	4	0	3F333	B66F   9/18	143	¾Τ	Others
B66F   9/19  \	4	4	3F333	B66F   9/19	17	ٲưפˤ뤿ղŪʡΣ	Additional means for facilitating unloading [3]
B66F   9/19  A	4	0	3F333	B66F   9/19	93	ʪʤȷ礷ʪʤեȼ֤κ̾˰ߡޤϤ겡ФΡ㡥ѥס̤͡ޤϥեΥ饤ѥ٥ϡǡȡ֤ΤΥեưϡեȥפʻѰ̤ϡֿ֡͡ޡ	engaged with articles, pulling them onto or pushing them out of loading surface of lifters, e.g. pulling clamps (note: conveyors for sliding loading surface or forks 9/12 G, H.  Back and forth motion of forks for loading 9/10, combination of forks and cla
B66F   9/19  B	4	1	3F333	B66F   9/19	135	äˡʪʤ̤ˤΤ߷礹ˤʪʤ򥹥饤ɤΡ㡥ȥѥåѥץåץ֡͡Хå쥹Ȥϡӡֿ͡ޡ	sliding articles by members engaged only with rear surface of them, e.g. push-pull devices for sheet pallettes (note: back rests 9/12 S) [figure]
B66F   9/19  C	4	2	3F333	B66F   9/19	32	ä˥ץå㡼ȤȤ˥եޤϥץƥưΡ㡥ץå㡼꡼֡͡եޤϥץƥΤߤưϡ¡ֿ͡ޡ	moving forks or platens back and forth along with pushers in particular, e.g. pusher reach devices (note: back and forth motion of forks or platens alone 9/14 B) [figure]
B66F   9/19  D	4	2	3F333	B66F   9/19	61	ä˥ץå㡼Υ󥯼̵ħͭΡ㡥̤ȼʤץå㡼ץ졼Ȥ򷹤󥯵͡ħΤʤ󥯵ȼʤΤʬ¤ֿͥ͡ޡ	characterised by linkage type telescopic mechanisms for pushers in particular, e.g. linkages mechanisms tilting pusher plate during extending or retracting motion (note: This classification B takes precedence to linkages mechanisms without features.) [fig
B66F   9/19  E	4	2	3F333	B66F   9/19	111	ץåץ˴ϢȥѥĥȤμ谷ħΡ㡥ȥסơʡȥѥåȤʬΥ̥͡װ̡Фֿͥ͡ޡ	characterised by handling of sheet pallettes related to push-pull, e.g. sheet clamps, retainers, separating sheet pallettes (Takes precedence to clamps in general 9/18.) [figure]
B66F   9/19  F	4	1	3F333	B66F   9/19	59	ʪʤ̾˰िΥ磻ˤʿʡ㡥ֺܥեեȼ֡͡ʪʤ߾夲뤿Υ졼ʻߤϡơ߾ѥեååȤϡġֿ͡ޡ	Horizontal pulling means by wires for pulling articles onto loading surface, e.g. lift truck with winch equipped on vehicle (note: co-assignment of winches or cranes for lifting articles 9/06 F, hook attachments for suspension 9/18 D) [figure]
B66F   9/19  Z	4	0	3F333	B66F   9/19	35	¾	Others
B66F   9/20  \	3	3	3F333	B66F   9/20	44	ޥȡץåȥեࡤޤϥեưޤ椹뤿μʡʼξʷȷ礷ưãʤưϼФ£ˡˡΣ	Means for actuating or controlling masts, platforms, or forks (power take-off from vehicle transmissions, combined with vehicle propulsion systems B60K) [3]
B66F   9/20  A	3	0	3F333	B66F   9/20	414	㡥Сݤι¤͡ƥ󥰥ϥɥϡ£ġξϡ£ˡ졼Сϡ£ãСå̤ϡȣȣȥ饯ΰ֤ϡţƣСưְ̤ϡƣȣžʤˤСå֤ϡšۼΤħϡס̤ϡƣ¡ƣˤ줾ֿͥ͡ޡ	Operating portion for cargo handlings [Example: The structure of the lever for operating cargo handlings] [Note: The steering handle is classified to B62D, Drive control of vehicles, is classified to B60K, Lever for operating cranes, is classified to B66C13/56, Lever switches in general, are classified to H01H19/18, Safety device for tractors, is classified to E02F9/24, Lever transmission devices in general, are classified to F16H21/00, Arrangement of levers and switches around the driver's seat, is classified to 9/075E, and the characteristics of the operating valves per se is classified to 9/22W. As for the characteristics in general, however, F15B and F16K take precedence, respectively.] [figure]
B66F   9/20  B	3	1	3F333	B66F   9/20	71	Сΰưϰ¡ĥʡֿޡ	limiting travel range of docking operation levers, locking means [figure]
B66F   9/20  C	3	1	3F333	B66F   9/20	86	СΥȥ󥹥ǥ塼ưħ㡥סߤޥåѥɥֿ͡ޡ	features of transducer operators for docking operation levers, e.g. dogs for operating microswitches provided on spool [figure]
B66F   9/20  F	3	0	3F333	B66F   9/20	76	ŪСɽ֡㡥Ūư᡼Ѻܾ֤εŪɽ͡ήŪʤΤϡŵŪʤΤϡʤޤǤƤⵡ˼פħСʬहֿ͡ޡ	Mechanical detection, indication, safety devices, e.g. mechanical operating meters, mechanical indicators for loading conditions (note: by fluid means 9/22, by electrical means 9/24.  Assigned here if a given mechanism has a key feature.) [figure]
B66F   9/20  G	3	1	3F333	B66F   9/20	91	ŪٸСɽ֡㡥ޥȤեΥȳѤ򡤥磻󥯤Ѱãǥ᡼Ρֿ͡ޡ	Mechanical angle detection, indication, safety devices, e.g. transferring tilting angles of masts or forks to meters by means of deflection transmitting mechanisms such as wires or linkages [figure]
B66F   9/20  H	3	1	3F333	B66F   9/20	67	ŪĹСɽ֡㡥ޥȤեȹ⡤꡼Ĺ򡤥磻󥯤Ѱãǥ᡼Ρֿ͡ޡ	Mechanical length detection, indication, safety devices, e.g. transferring lifting heights or reach lengths of masts or forks to meters by means of deflection transmitting mechanisms such as wires or linkages [figure]
B66F   9/20  J	3	1	3F333	B66F   9/20	55	Ū̸Сɽ֡㡥եѺܤʪβٽŤ򡤥ХͤФǸɽΡ͡ѤϷפˤٽŤɽ褦ˤΤϡʬ˴ޤֿ͡ޡ	Mechanical weight detection, indication, safety devices, e.g. detecting and indicating weights of loads on forks using spring scale (note: Load indications using hydraulic pressures of cylinders are assigned here.) [figure]
B66F   9/20  Z	3	0	3F333	B66F   9/20	75	¾ΤΡ㡥Ūɻѥåԥ󡣵ŪѺܾɸŪ󥿥åʡ	Others, e.g. lock pins for preventing mechanical falling, mechanical loading condition indicators, mechanical interlocking means
B66F   9/22  \	4	4	3F333	B66F   9/22	29	հ֤ޤˡΣ	Hydraulic devices or systems [3]
B66F   9/22  C	4	0	3F333	B66F   9/22	226	եʡ㡧ñޤ󼰥եȥ̡̥͡ƣ£ֿ͡ޡ	Hydraulic means forklifts, e.g. single or parallel lift cylinders (cylinders in general F 15 B 15/16) [figure]
B66F   9/22  D	4	1	3F333	B66F   9/22	65	¿ʼեȥޤΡֿޡ	containing multi-step lift cylinders [figure]
B66F   9/22  E	4	2	3F333	B66F   9/22	21	¿ʥƥ쥹ԥåեȥޤΡֿޡ	containing multi-step telescopic lift cylinders [figure]
B66F   9/22  G	4	0	3F333	B66F   9/22	179	ʡ㡧ȥֿ͡ޡ	Hydraulic means for tilting, e.g. tilt cylinders [figure]
B66F   9/22  H	4	0	3F333	B66F   9/22	109	ʤʡ㡧ץå㡼ѡ꡼ѡɥ꡼ѡȥѡֿ͡ޡ	Hydraulic means for moving docking means back and forth, e.g. for pushers, for reach, for side reach, for sheet clamp [figure]
B66F   9/22  K	4	0	3F333	B66F   9/22	187	֤βԤޤϳʡ㡧ɥեѡѡֿ͡ޡ	Hydraulic means for traversing or opening and closing docking devices, e.g. for side shift, for clamp [figure]
B66F   9/22  L	4	1	3F333	B66F   9/22	29	ӥ饤ʡֿޡ	Hydraulic means for stabilisers [figure]
B66F   9/22  M	4	1	3F333	B66F   9/22	55	ƥʥץåʡֿޡ	Hydraulic means for container spreaders [figure]
B66F   9/22  N	4	0	3F333	B66F   9/22	51	֤βžư˴ؤʡ㡧ơ꡼Х֡ưХ󥵡ֿ͡ޡ	Hydraulic means related to turning or oscillating docking devices, e.g. rotators, rotary valves, oscillating balancers [figure]
B66F   9/22  R	4	0	3F333	B66F   9/22	298	桤Τʡ㡧ɻߡžɻߡưߡŵŪʤΤϡСϡֿ͡ޡ	Hydraulic means for control or safety, e.g. preventing malfunctioning, preventing falling, automatically stopping, electrical 9/24, operating levers 9/20 [figure]
B66F   9/22  S	4	1	3F333	B66F   9/22	332	奨®㡧եȥξ®ֿ͡ޡ	Controlling actuator speeds, e.g. controlling rising and falling speeds for lift cylinders [figure]
B66F   9/22  T	4	2	3F333	B66F   9/22	95	奨Υåֿ֡ޡ	Cushioning devices for actuators [figure]
B66F   9/22  U	4	2	3F333	B66F   9/22	66	ϳ̤ˤѰɻߡ㡧ϩ»ˤޥȤεɻߡֿ͡ޡ	Preventing deflections due to leakages, e.g. preventing sudden falling of mast due to damaged piping [figure]
B66F   9/22  V	4	0	3F333	B66F   9/22	552	ȼʡֿޡ	Hydraulic means for lift trucks [figure]
B66F   9/22  W	4	0	3F333	B66F   9/22	230	ʣ奨֤Ǥήڴʡ㡧ʣڴۤޤϩֿ͡ޡ	Means for switching flows among multiple actuators, e.g. circuits containing multiple switching valves [figure]
B66F   9/22  X	4	0	3F333	B66F   9/22	714	Ȥζư㡧٤˱ݥ׶ư桤졼٤˱ʬ۽ή̲͡ϡȤˡסֿ͡ޡ	Hydraulic sources and driving thereof, e.g. pump drive control depending on loading levels, accumulators, distributing or collecting flows depending on loading levels (Regenerative control is mainly assigned here.  9/24 W may be assigned supplementary.)
B66F   9/22  Z	4	0	3F333	B66F   9/22	375	¾ΤΡ㡧륿󥯡ȥĴեեȼ֤ΥХ֡Ϸסֿ͡ޡ	Others, e.g. oil tanks, adjusting cylinder strokes, balancing devices for forklifts, pressure gages [figure]
B66F   9/24  \	4	4	3F333	B66F   9/24	19	ŵ֤ޤˡΣ	Electrical devices or systems [3]
B66F   9/24  A	4	0	3F333	B66F   9/24	772	Բμưƥ˴ؤΡ̵ͼưեեȤβʬह롣󥷥ԡѡ٤Ԥʤ楷ƥ˴ؤ롤̤Ρ㤨ȹ⡤ָٰСϡ줾ʬबͥ衤̵ͼ֤ϡǣģŵξ̤ϡ£ֿ̡͡ޡ	Regarding the automation system for the running cargo handling [Note: It shall be classified to so-called cargo handling control for the unmanned automated forklifts. As for the individual control (such as the lifting height and the detection of the cargo position) regarding the control system for facilitating the sequential running, cargo loading and cargo unloading, the classification for each function takes precedence. The driving control for unmanned vehicle is classified to G05D1/02 and the electric vehicle in general is classified to B60L.] [figure]
B66F   9/24  R	4	1	3F333	B66F   9/24	139	Բμưƥˤưɻ֡ե륻֡ưΰ۾ưŪ˿Ǥơν֤ȤΡֿ͡ޡ	Devices for preventing malfunctioning with automatic running docking control systems (note: so called failsafe devices.  Taking actions such as corrections or stopping by automatically diagnosing motion faults.) [figure]
B66F   9/24  C	4	0	3F333	B66F   9/24	357	ȹ⸡С㡥եȹߡֿ͡ޡ	Detecting lifting heights, safety, control, e.g. stopping forks at a given height [figure]
B66F   9/24  B	4	1	3F333	B66F   9/24	179	ȹ⸡мʤħ㡥дι¤ˡ͡żŪĹ¬̤ϡǣ£ֿ͡ޡ	features for detecting lifting heights, e.g. detector structures, mounting methods (note: electromagnetic length measurements in general G 01 B 7/02) [figure]
B66F   9/24  E	4	0	3F333	B66F   9/24	198	ȳѸС㡥ޥȡեȥ֥饱åȡեߡֿ͡ޡ	Detecting tilting angles, safety, control, e.g. stopping masts, lift bracket or forks at a given angle [figure]
B66F   9/24  D	4	1	3F333	B66F   9/24	55	ȳѸмʤħ㡥дι¤͡żŪ¬̤ϡǣ£ֿ͡ޡ	features for detecting tilting angles, e.g. detector structures, mounting methods (note: electromagnetic length measurements in general G 01 B 9/06) [figure]
B66F   9/24  G	4	0	3F333	B66F   9/24	198	ٸС㡥ٽŲߡֿ͡ޡ	Detecting loads, safety, control, e.g. stopping overloaded docking [figure]
B66F   9/24  M	4	1	3F333	B66F   9/24	161	ٸмʤħ㡥дι¤եؤμ͡ŵ̷װ̤ϡǣǣֿ͡ޡ	features for detecting loading level, e.g. detector structures, mounting methods (note: electric scales for vehicles in general G 01 G 19/12) [figure]
B66F   9/24  J	4	0	3F333	B66F   9/24	244	žɻžݥ⡼Ȥ˴ؤ档ȹ⡤ȳѡٽŤΤʤȤ⣲Ĥ̤Ϥơ⡼Ȥͤۤʤ褦Ѱ̤ޤϰư®٤¤Τʬह롣ȹ⡤ȳѡٽŤΤĤΤߤϤΤϤ줾ášǤͥ衤졼žɻߤϡ£ãֿ͡ޡ	Fall prevention control [Note: Controls regarding the overturning moment. At least two of the following three quantities, the lifting height, tilt angle and weight, shall be input, and the amount of the displacement or the velocity of moving is controlled so that the moment shall not exceed the specified level, resulting in the classification. When only one of the three quantities, the lifting height, tilt angle and weight, is input, C, E, or G takes precedence respectively. The fall prevention of a crane shall be classified to B66C23/.] [figure]
B66F   9/24  F	4	1	3F333	B66F   9/24	713	ä˹ȼ֤ˤžɻ㡥žɻߤΤκưϰϡ®ٵֿ͡ޡ	Control for preventing falling with truck lift in particular, e.g. operation range for preventing falling, speed limits [figure]
B66F   9/24  L	4	0	3F333	B66F   9/24	685	оʪС㡥̵ͼưեեȤξ㳲ʪȯߡեɸêȯ̵ַ͡Լ̤ϡǣģֿ͡ޡ	Detecting objects, safety, control, e.g. detecting obstacles for unmanned forklifts and stopping thereof, detecting target shelf and positioning  (note: control of unmanned vehicles in general G 65 D 1/02) [figure]
B66F   9/24  P	4	1	3F333	B66F   9/24	530	оʪмʤħ㡥дι¤եؤμ㤨СեüĶȵΥ󥵡¢Ρֿ͡ޡ	Features of means for detecting objects, e.g. detector structures, mounting methods to forks, e.g. integration of ultrasonic distance sensor in fork tip [figure]
B66F   9/24  H	4	1	3F333	B66F   9/24	262	ä˹ȼ֤ˤоʪС㡥ξɻߤΤκϰϵ㤨С˸ŵΥдߤΡֿ͡ޡ	Detecting objects, safety, control with truck lifers in particular, e.g. limiting working area for preventing worktable from collisions, e.g. provision of photoelectric distance detector on workbench [figure]
B66F   9/24  N	4	0	3F333	B66F   9/24	218	եȡž׸С㡥žβʤߤ䡤ưǧ㤨Сޥåˤߡֿ͡ޡ	Detecting shift, rotation or clamp, safety, control, e.g. stopping docking means such as rotary clamps at specified positions or confirms activation thereof, e.g. stopping at specified positions with micro switches [figure]
B66F   9/24  Q	4	0	3F333	B66F   9/24	78	޹߲ɻߡʤˤΤϡդͥ衣åԥεŪʤΤϡڡ͡㡥եȥǸδեȥ֥饱åȥżåֿ͡ޡ	Preventing falling or swooping, safety, control (note: 9/22 U takes precedence to those by hydraulic means, 9/20 Z to those by mechanical means such as locking pins, e.g. torn lift chain detectors, solenoid locking mechanisms for lift bracket [figure]
B66F   9/24  K	4	1	3F333	B66F   9/24	21	ä˾޹߲ɻߡֿޡ	Preventing falling or swooping, safety, control of platforms in particular [figure]
B66F   9/24  S	4	0	3F333	B66F   9/24	1033	ȼ֤ͭθСߤ˺ѰळȤˤȤŤͭ桤֤ʬह롤οʿϡ١ϡءžϡơϡƱˡоʪΤϡƱȤͥ褹ֿ͡ޡ	Detection, safety, control inherent to truck lifers (note: control and safety devices are mainly classified here that are based on the fact that operator performs work on the rising and falling platform. Note that 9/06 Y takes precedence to horizontal control of work bench, 9/06 X to turning control, 9/24 F to falling control, 9/24 K to dropping control, and 9/24 H to detecting objects
B66F   9/24  T	4	1	3F333	B66F   9/24	466	ȼΤȤδ֤α㡧Ǥξξֿ͡ޡ	Remote control between rising and falling platform and vehicle body, e.g. rising and falling operation on platform, running operation of vehicle [figure]
B66F   9/24  Y	4	1	3F333	B66F   9/24	229	Ȱδɻߡ㡧Ȥˤﹽ¤͡ȼΡȣǣ͡㡧ŵŪʤˤ롤蘆줿ؤŵͥ륮ֿ͡ޡ	Preventing electric shocks for operators performing work at elevated locations, e.g. insulating structures of platform for livewire work (note: wiring work per se H 02 G 1/-, e.g. feeding electric energy to insulated platform by non-electric means [figure
B66F   9/24  U	4	0	3F333	B66F   9/24	174	꡼ץåץͭθС㡥֤˲Ѥߤ뤿Ρץå㡼ȼΤȤϢư档žݤɻߤ뤿ΡȹϢư꡼̤¡̣áʤФֿͥ͡͡ޡ	Detection, safety, control inherent to reach or push - pull, e.g. interlocking control between pusher and vehicle body for loading at a certain position.  Limiting reach interlocked with lifting height for preventing vehicle from falling (Takes precedence
B66F   9/24  V	4	0	3F333	B66F   9/24	78	߲̥ƥʥץåͤͭθС㡧ĥȥåưɻѥ󥿡åֿ֡͡ޡ	Detection, safety, control inherent to suspension (container spreaders), e.g. interlocking devices for preventing malfunctioning of twist locks [figure]
B66F   9/24  W	4	0	3F333	B66F   9/24	972	ŵŪư㡥⡼ν͡ŵѰ̤ϡ£̡٤˱ݥ׶ưϡءֲ͡ϡȡءֿ͡ޡ	Electrical drive control, e.g. output control of motors (note: electric vehicles in general B 60 L, pump drive control based on load 9/22 X) (Assign regenerative control to this classification and 9/22 X.) [figure]
B66F   9/24  Z	4	0	3F333	B66F   9/24	1470	¾ΤΡ㡧ưٹפǡ¥ḁ̊͡ǥץ졼žؼ̿͡եեȤαžʤʪʡêʤɤŻˤؼȽλϿϡǣƣʺ߸˴ǡƥ˻ȡå졼αž£ǣֿ͡ޡ	Others [e.g. Blinking of alarm lamp for moving and seating switch] [Display, driving direction and communication] [Note: Operation management of forklifts, that is, the directions about cargo and shelves by using the computer chips, the registration of the finish of work and so on, shall be referred to G06F15/24 (Data processing system for inventory management.) The operation management of stacker cranes is classified to B65G1/.] [figure]
B66F  11/00  \	0	0	3F333	B66F  11/00	65	¾ʬवʤüӤäŬ礵夲֡ʼξٻ夲ޤϰư뤿̤֤ξ°ʣ£ӣ	Lifting devices specially adapted for particular uses not otherwise provided for (ground-engaging vehicle fittings for supporting, lifting or manoeuvring the vehicle B60S 9/00)
B66F  11/00  A	0	0	3F333	B66F  11/00	88	ʺ˷ФΩݤ줿ɥݥȡˤĤƺΤˤ꾺ߤȤߥեȡ㡥Ϥեȡơݥѡݥեȡ٥ΰ۲ʪѡ͡ľ˥ɥݥߤΤϡҾ֡ţáѾ֡££šĥץۥȡ££Ϥ֡ţãֿ͡ޡ	Temporary lift consisting of guide rails resting on steps at an angle and having load bench rising and falling by means of rope, e.g. ladder type lifts, tapered lifts, for loading and unloading articles to be moved to and from the veranda
B66F  11/00  B	0	1	3F333	B66F  11/00	50	Υɹ¤㡥ɥݥη¤ɥݥֿ͡ޡ	Guide structures of load platforms, e.g. profiles or structures of guide rails, guide rollers [figure]
B66F  11/00  C	0	2	3F333	B66F  11/00	48	޾߼ޤϥƥ쥹ԥĥɥݥħˤΡֿޡ	Characterised by folding or telescopic guide rails [figure]
B66F  11/00  D	0	1	3F333	B66F  11/00	111	ħ㡥ʪʤŬѤ뤿ι¤ʿݻֿ͡ޡ	Features of load platforms, e.g. structures adapted for special articles, maintaining platform level [figure]
B66F  11/00  E	0	1	3F333	B66F  11/00	94	ξ߶ư㡥磻䡤󡤥סݥꡤץĥȡưֿ͡ޡ	Rising and falling drive mechanisms for load platform, e.g. wire, chain, pulley, sprocket, drive [figure]
B66F  11/00  F	0	1	3F333	B66F  11/00	44	ؤʪʤѤߤ㡥Хɥݥξ岼ߤֿ͡ޡ	Loading and unloading articles to and from lead platform, e.g. auxiliary guides provided at top and bottom of tilted guide rails [figure]
B66F  11/00  G	0	1	3F333	B66F  11/00	35	ɥݥλٻ¤㡥եݥࡤȵֿ͡ޡ	Supporting structures of guides, e.g. frames, tilting mechanisms, posts [figure]
B66F  11/00  H	0	2	3F333	B66F  11/00	22	ä˥ɥݥξʺ̤˻ٻ뤿ι¤㡥ݻեĥݻסֿ͡ޡ	Structures for supporting top of guide rails at upper surface of steps in particular, e.g. support hooks, support clamps [figure]
B66F  11/00  Z	0	0	3F333	B66F  11/00	126	¾Τ	Others
B66F  11/04  \	1	1	3F333	B66F  11/04	1842	˾Ԥ뤿᱿žԼȤ˾ξذ֤뤳ȤǤưץåȥեޤϰưž㡥ξΤΡΤΤΡѥץåȥե̣ʪ߽֣ͤ£̳Ѽξη£УΤΰݻţģĹǽʲ߹¤ʪ­ţǣϤǻѤ뾺ţã	for movable platforms or cabins, e.g. on vehicles, permitting workmen to place themselves in any desired position for carrying out required operations (platforms for cleaning windows A47L 3/02; devices for rescuing persons from buildings A62B 1/02; vehicle aspects of service vehicles B60P 3/14; maintenance travellers for bridges E01D 19/10; scaffolds on an extensible substructure E04G 1/22; liftable or lowerable platforms for use on ladders E06C 7/16)
B66F  13/00  \	0	0	3F330	B66F  13/00	187	̤ι¤Ūħޤ°ʪ	Common constructional features or accessories
B66F  15/00  \	0	0	3F330	B66F  15/00	195	ƤޤϥС	Crowbars or levers
B66F  17/00  \	0	0	3F330	B66F  17/00	25	֡㡥夲Ϥ¤ޤɽꤹ	Safety devices, e.g. for limiting or indicating lifting force
B66F  17/00  A	0	0	3F330	B66F  17/00	94	٤˷桤Ρ֡㡥ٸΡɽɻߡֿ͡ޡ	Control, detection, safety devices related to loads, e.g. detecting or indicating loads, preventing overloading [figure]
B66F  17/00  B	0	1	3F330	B66F  17/00	37	ʤޤΡ㡥꡼եХ֤ˤ¡ϸδ狼οǥХ֤ڴΡ͡եեȡǡʡֿ͡ޡ	Including hydraulic means, e.g. limiting loads by relief valve, switching valves by signals from pressure detectors (note: forklifts 9/24 G, J) [figure]
B66F  17/00  C	0	0	3F330	B66F  17/00	177	ȹ˷桤Ρ֡㡥եȤȹɽȹߡ͡եեȡáֿ͡ޡ	Control, detection, safety devices related to lifting height, e.g. indicating lifting heights, stopping at a certain height (note: forklifts 9/24 C) [figure]
B66F  17/00  D	0	1	3F330	B66F  17/00	61	ä߲ΤΤŬ¤㡥磻䴬赡βžȹ򻻽ФΡֿ͡ޡ	Structures adapted for suspension types in particular, e.g. calculating lifting heights based on rotation of wire winding machine [figure]
B66F  17/00  E	0	0	3F330	B66F  17/00	180	ޤŵŪʿʿХοʿ棷ʣåϢư桤ֿͥ͡ޡ	Mechanical or electrical control of the horizontal balance [Note: Hydraulic horizontal control 7/20 and linked control of multiple jacks take precedence to 3/46.][figure]
B66F  17/00  F	0	0	3F330	B66F  17/00	264	޷Ф˷桤Ρ֡㡥֥졼ʡåʡ͡ջĴ֤ĥåߤήΥåեեȡաѡ١££ֿ͡ޡ	Control, detection, safety means related to falling or steep slopes, e.g. braking or locking means (note: intermittent jacks with toothed posts 1/04, fluid jacks with stopper 3/30, forklifts 9/22 U, 9/24 Q, lifts B 66B 5/16) [figure]
B66F  17/00  G	0	1	3F330	B66F  17/00	112	ΤǤˤȤ޷ФɻߤΡֿޡ	Preventing falling or steep sloping of load platform due to cut rope [figure]
B66F  17/00  H	0	1	3F330	B66F  17/00	43	ϩ»ˤȤŤ޷ФɻߤΡֿޡ	Preventing falling or steep sloping of load platform due to fractured hydraulic piping [figure]
B66F  17/00  J	0	0	3F330	B66F  17/00	63	®㡥ŵŪʤΡŪʤΡֿ͡ޡ	Rising and falling speed control, e.g. electric or hydraulic [figure]
B66F  17/00  K	0	0	3F330	B66F  17/00	22	֡㡥ѥͥ롤åֿ͡ޡ	Controls, e.g. operation panels, switches [figure]
B66F  17/00  Z	0	0	3F330	B66F  17/00	78	¾	Others
B66F  19/00  \	0	0	3F330	B66F  19/00	75	¾ʬवʤ夲夲ޤϲ	Hoisting, lifting, hauling, or pushing, not otherwise provided for
B66F  19/00  A	0	0	3F330	B66F  19/00	69	Х󥵡㡥ʿջٻ̵֡ϻٻ֡󥿡ݥȤȥХ󥹤Ȥ꾯Ϥʪʤ򾺹߰ư褦ˤΡ̵͡ϥۥȡʤΤ߲ʪʤ򴬾Ϥ椹뤳Ȥˤ̵Ū˻ٻΤϡ£ģšֿ͡ޡ	balance supporting devices, zero gravity supporting devices, rising and falling articles with minimal force by balancing with counterweight
B66F  19/00  B	0	1	3F330	B66F  19/00	144	߲줿楨ݥˤľܻٻΡ㡥ήΰѤΡץ󥰤ѤΡ߲˹֡ʤֿͥ͡͡ޡ	Directly supported by suspended actuators, e.g. using of hydraulic cylinders or springs (Suspension type hydraulic dampers take precedence to J.) [figure]
B66F  19/00  C	0	1	3F330	B66F  19/00	276	ưΤʤöŪХ󥵡㡥󥿥ȤˤΡץ󥰤ˤΡ̥Х󥹷߲ޤࡤ󥿥ȰưݥΤΤޤֿ͡͡ޡ	Passive balancers without drive sources, e.g. by counterweights or springs (including balanced rising and falling platforms, moving counterweights or with arms) [figure]
B66F  19/00  D	0	1	3F330	B66F  19/00	298	ݥ෿Х󥵡㡧ʿԻշ󥯤ޤॢݥĤΡ͡ʿԥ󥯥ܥĥȡ£ʡֿ͡ޡ	Arm balancers, e.g. with arms containing parallelogram arms (note: parallelogram linkage robots B 25 J) [figure]
B66F  19/00  E	0	1	3F330	B66F  19/00	142	ʿɤȿľɤʿԻշ󥯤ΰĤλˡܤ⤦Ĥλ˥ɤ褦ˤʿԥ󥯷Х󥵡ֿޡ	Parallel linkage type balancers having horizontal and vertical guides and one pivot of parallelogram linkage guided along X axis and another adjacent pivot guided along Y axis [figure]
B66F  19/00  F	0	2	3F330	B66F  19/00	49	Ω楨ݥˤ󥯤ΣζưԤʤΡֿޡ	Driving linkage along X and Y axes by independent actuators [figure]
B66F  19/00  G	0	1	3F330	B66F  19/00	50	Х󥵤ֿͥ͡ޡ	Operation or control of balancers (note: Takes precedence to 17/00.) [figure]
B66F  19/00  H	0	2	3F330	B66F  19/00	128	֡㡥ۡϥɥ롤ĥܥĥĥסޤࡤ¡ʤֿͥ͡ޡ	Controls, e.g. some operation valves, handles, switch boxes, grips, or clamps are included.  Takes precedence to B or J.) [figure]
B66F  19/00  J	0	3	3F330	B66F  19/00	209	ήΰ֡ñŵʤʻѤޤ͡㡧Ĵֿ֡͡ޡ	Means for controlling fluid pressures (note: including combination of simple electrical means), e.g. pressure regulators [figure]
B66F  19/00  K	0	3	3F330	B66F  19/00	228	ŵ֤֡ȤƤ楨ݥޤബ弰Х桤£ģֿ͡ޡ	Electric controls (note: winding balancer control including hydraulic actuators being as output devices B 66 D 3/00) [figure]
B66F  19/00  R	0	0	3F330	B66F  19/00	94	¾ʬवʤޤϲʡ̾ߤȤȤ߹礻ޤࡣ	Hauling or pushing, not otherwise provided for (including combinations with rising and falling)
B66F  19/00  S	0	1	3F330	B66F  19/00	156	ήΰĥѤ븣ޤϲ	Hauling or pushing using of fluid pressure jacks
B66F  19/00  T	0	2	3F330	B66F  19/00	63	ޤϲʻήΰĥŪ˻ٻݥѤ	Using of rail members that temporarily support fluid pressure jacks during hauling or pushing
B66F  19/00  U	0	2	3F330	B66F  19/00	58	ήΰĥȥݥ֥ޤϥ磻ȤѤ븣ޤϲ	Hauling or pushing using fluid pressure jack and cable or wire member
B66F  19/00  Z	0	0	3F330	B66F  19/00	380	¾ΤΡݥĥϡ£ǣ	Others (note: air cushions B 65 G 7/06)
B66F  19/02  \	1	1	3F330	B66F  19/02	16	Ѥ夲ΤθΤ££Ҷꤹ뤿뤿ΤΣ£ƣùäŬ礵줿¤Ǥꤵ뤿μʣţģˡΣ	Hauling using anchors; Anchors therefor (marine anchors B63B 21/24; anchoring aircraft B64F 1/12; means for anchoring structural elements specially adapted to foundation engineering E02D 5/74) [3]
