B29C  31/00		갷㡥ζΣ	Handling, e.g. feeding of the material to be shaped	11651
B29C  31/02		ƴ㡥ۥåѡʬۡΣ	Dispensing from vessels, e.g. hoppers	3617
B29C  31/04		롤㡥ӥƥؤζΣ	Feeding, e.g. into a mould cavity	6875
B29C  31/06		̤줿ΤΡΣ	in measured doses	1984
B29C  31/08		ͽʤΡΣ	of preforms	4444
B29C  31/10		κΡΣ	of several materials	814
B29C  33/00		ޤϥκޤ°֡Σ	Moulds or cores; Details thereof or accessories therefor	24129
B29C  33/02		Ǯޤ֤Ȥ߹ޤ줿ΡΣ	with incorporated heating or cooling means	10511
B29C  33/04		ΡޤϾѤΡΣ	using liquids, gas or steam	8293
B29C  33/06		ȼͤѤΡΣ	using radiation	656
B29C  33/08		ͶŲǮˤΡΣ	for dielectric heating	574
B29C  33/10		٥֤ΤΡΣ	with incorporated venting means	5047
B29C  33/12		ʪ㡥٥롤ַ֤᤹Ȥ߹ޤ줿ΡΣ	with incorporated means for positioning inserts, e.g. labels	5762
B29C  33/14		ɤФơΣ	against the mould wall	1637
B29C  33/16		ϤѤΡΣ	using magnetic means	475
B29C  33/18		ѤΡΣ	using vacuum	891
B29C  33/20		ĤޤϥסΣ	Opening, closing or clamping	4478
B29C  33/22		ľưˤΡΣ	by rectilinear movement	2637
B29C  33/24		ήΰޤ϶֤ѤΡΣ	using hydraulic or pneumatic means	2039
B29C  33/26		ưˤΡΣ	by pivotal movement	1040
B29C  33/28		ήΰޤ϶֤ѤΡΣ	using hydraulic or pneumatic means	427
B29C  33/30		դ򴹤ޤϿ碌Σ	Mounting, exchanging or centering	21871
B29C  33/32		ϤѤΡΣ	using magnetic means	395
B29C  33/34		ưΤΡ㡥ơؤޤơ󤫤Σ	movable, e.g. to or from the moulding station	1601
B29C  33/36		Ϣ³Ū˲ưʤΡΣ	continuously movable	924
B29C  33/38		ޤ¤ˡħΡʣ£ãͥˡΣ	characterised by the material or the manufacturing process(                <b>B29C33/44</b> takes precedence)	16955
B29C  33/40		ץ饹å㡥ȯˢΤޤϥΣ	Plastics, e.g. foam or rubber	4499
B29C  33/42		̤η㡥֤ޤϹ¡ħΡΣ	characterised by the shape of the moulding surface, e.g. ribs or grooves	10089
B29C  33/44		ʡ㡥åʡμФΤ֤ΡޤʤμФưפˤ뤿̤ι¤ͭΡΣ	with means for, or specially constructed to facilitate, the removal of articles, e.g. of undercut articles	17715
B29C  33/46		ήΰѤΡΣ	using fluid pressure	1507
B29C  33/48		Ĥ֤ޤϲΤʤͭΡΣ	with means for collapsing or disassembling	1508
B29C  33/50		ͭΡΣ	elastic	1235
B29C  33/52		ޤϲͻΤΡΣ	soluble or fusible	1189
B29C  33/54		ʴޤγ줿ΡΣ	made of powdered or granular material	138
B29C  33/56		ʤޡΥޡޤޤʬΥޡΣ	Coatings; Releasing, lubricating or separating agents	1981
B29C  33/58		ΥޤŬѡΣ	Applying the releasing agents	2439
B29C  33/60		ΥޡޤޤʬΥޡΣ	Releasing, lubricating or separating agents	1806
B29C  33/62		ݥޡޤϥꥴޡ˴ŤΡΣ	based on polymers or oligomers	1111
B29C  33/64		ꥳΣ	Silicone	879
B29C  33/66		ͶƳΡΣ	Cellulose; Derivatives thereof	63
B29C  33/68		ΥȡΣ	Release sheets	1630
B29C  33/70		ݼΣ	Maintenance	505
B29C  33/72		Σ	Cleaning	6148
B29C  33/74		佤Σ	Repairing	335
B29C  33/76		ʣ£ã£ãͥˡΣ	Cores(<b>B29C33/02 to B29C33/70</b>  take precedence)	5201
B29C  35/00		ǮѤޤϹŲ㡥ͶޤϲβΤ֡ʲǮޤ֤Ȥ߹ޤ줿£ãץ饹å֤ΤιŲ֣ãΤΣ££ˡΣ	Heating, cooling or curing, e.g. crosslinking or vulcanising; Apparatus therefor(moulds with incorporated heating or cooling means <b>B29C33/02</b>;  curing devices for plastics dental prostheses <b>A61C13/14</b>;  before moulding <b>B29B13/00</b>)	12873
B29C  35/02		ǮޤϹŲ㡥Ͷޤϲβ㲹β£ãˡΣ	Heating or curing, e.g. crosslinking or vulcanising (cold vulcanisation <b>B29C35/18</b>)	29188
B29C  35/04		ΡΤޤϾѤΡΣ	using liquids, gas or steam	8817
B29C  35/06		ĹʪʤΤΤΡΣ	for articles of indefinite length	1976
B29C  35/08		ưͥ륮ޤγȼͤˤΡΣ	by wave energy or particle radiation	12338
B29C  35/10		ĹʪʤΤΤΡΣ	for articles of indefinite length	1176
B29C  35/12		ͶŲǮΣ	Dielectric heating	1181
B29C  35/14		ĹʪʤΤΤΡΣ	for articles of indefinite length	224
B29C  35/16		ѡΣ	Cooling	18706
B29C  35/18		㲹βΣ	Cold vulcanisation	188
B29C  37/00		롼ף£ãޤϣ£ãޤʤʡ°֤ޤΣ	Component parts, details, accessories or auxiliary operations, not covered by group <b>B29C33/00</b> or <b>B29C35/00</b>	25277
B29C  37/02		͵ޤϥХνΣ	Deburring or deflashing	10300
B29C  37/04		ʪʤΤΤΡ㡥ܤȤ߹蘆줿͵ޤϥХνΣ	of welded articles, e.g. deburring or deflashing in combination with welding	737
B29C  39/00		ʤޤϸꤵ줿ɽ̴֤礭ʰϤäʤƳΤ֡ʣ£ãͥˡΣ	Shaping by casting, i.e. introducing the moulding material into a mould or between confining surfaces without significant moulding pressure; Apparatus therefor(<b>B29C41/00</b> takes precedence)	10372
B29C  39/02		ĹʪʡʤϢ³ʪʡ¤뤿ΤΡΣ	for making articles of definite length, i.e. discrete articles	8985
B29C  39/04		ưѤΡΣ	using movable moulds(<b>B29C41/02</b> takes precedence)	647
B29C  39/06		Ϣ³Ū˰ưǤΡ㡥¤饤˱äưưǤΡΣ	continuously movable, e.g. along a production line	545
B29C  39/08		ϤˤäƷƳΡΣ	Introducing the material into the mould by centrifugal force	523
B29C  39/10		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. casting around inserts or for coating articles	15848
B29C  39/12		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	2950
B29C  39/14		Ĺʪʤ¤뤿ΤΡΣ	for making articles of indefinite length	778
B29C  39/16		ɥ쥹٥ȴ֤ǡΣ	between endless belts	987
B29C  39/18		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. casting around inserts or for coating articles	1713
B29C  39/20		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	567
B29C  39/22		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	5919
B29C  39/24		ؤκζΣ	Feeding the material into the mould	6482
B29C  39/26		ޤϥΣ	Moulds or cores	12985
B29C  39/28		Хȯɻ߼ʤͭΡΣ	with means to avoid flashes	633
B29C  39/30		ʤǼʤͭΡΣ	with means for cutting the article	185
B29C  39/32		Ʃˤ뤿ηѤޤϤΤΤͭΡΣ	with joints or the like for making the mould impervious	256
B29C  39/34		åʤΤΤΡΣ	for undercut articles	423
B29C  39/36		ʤμФΣ	Removing moulded articles	3341
B29C  39/38		ǮޤѡΣ	Heating or cooling	4411
B29C  39/40		ѤѲ㡥̡Σ	Compensating volume change, e.g. retraction	644
B29C  39/42		̤ξ㡥ǤΣ	Casting under special conditions, e.g. vacuum	2825
B29C  39/44		̡ޤĴΣ	Measuring, controlling or regulating	2278
B29C  41/00		ޤϤ¾δΤʤ뤳Ȥˤʤ夷ʤΥ뤳ȤˤΤ֡ʲðˤΣ£ãˡΣ	Shaping by coating a mould, core or other substrate, i.e. by depositing material and stripping-off the shaped article; Apparatus therefor(with compacting pressure <b>B29C43/00</b>)	7448
B29C  41/02		ĹʪʡʤϢ³ʪʡ¤뤿ΤΡΣ	for making articles of definite length, i.e. discrete articles	1381
B29C  41/04		žޤϱʤž뤳Ȥˤ귿̤ʤΡΣ	Rotational or centrifugal casting, i.e. coating the inside of a mould by rotating the mould	4946
B29C  41/06		󼴤ޤϤʾ¿ΤΡΣ	about two or more axes	1009
B29C  41/08		ʮ̸ޤήưˤ귿ΡޤϤ¾δΤʤΡ㡥ʴʮ̸Σ	Coating a former, core or other substrate by spraying or fluidisation, e.g. spraying powder	1910
B29C  41/10		ήưˤΡΣ	by fluidisation	193
B29C  41/12		ξ˱Ÿ뤳ȤˤΡΣ	Spreading-out the material on a substrate	2326
B29C  41/14		οҤˤΡΣ	Dipping a core	4243
B29C  41/16		åʤåפޤϥ꡼ͭ¿ޤϵۼɽ̾ŬѤʬӽФ뤳ȤˤΣ	Slip casting, i.e. applying a slip or slurry on a perforated or porous or absorbent surface with the liquid being drained away	140
B29C  41/18		åʤηƲκӽФΡΣ	Slush casting, i.e. pouring moulding material into a hollow mould with excess material being poured off	1569
B29C  41/20		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. moulding around inserts or for coating articles	1986
B29C  41/22		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	1950
B29C  41/24		Ĺʪʤ¤뤿ΤΡΣ	for making articles of indefinite length	2718
B29C  41/26		ήưžɥ夵뤳ȤˤΡΣ	by depositing flowable material on a rotating drum	1827
B29C  41/28		ήư򥨥ɥ쥹٥Ⱦ夵뤳ȤˤΡΣ	by depositing flowable material on an endless belt	1678
B29C  41/30		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. moulding around inserts or for coating articles	798
B29C  41/32		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	781
B29C  41/34		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	6322
B29C  41/36		ޤϤ¾δξؤζΣ	Feeding the material on to the mould, core or other substrate	2572
B29C  41/38		ޤϤ¾δΡΣ	Moulds, cores or other substrates	2204
B29C  41/40		Σ	Cores	1532
B29C  41/42		ޤϤ¾δΤʤμ곰Σ	Removing articles from moulds, cores or other substrates	1842
B29C  41/44		ĹʪʤΡΣ	Articles of indefinite length	235
B29C  41/46		ǮޤѡΣ	Heating or cooling	4092
B29C  41/48		ѤѲ㡥̡Σ	Compensating volume change, e.g. retraction	70
B29C  41/50		̤ξ㡥ǤΣ	Shaping under special conditions, e.g. vacuum	522
B29C  41/52		̡ޤĴΣ	Measuring, controlling or regulating	2128
B29C  43/00		ʤղä줿ήưΡΤ֡Σ	Compression moulding, i.e. applying external pressure to flow the moulding material; Apparatus therefor	13137
B29C  43/02		ĹʪʡʤϢ³ʪʡΰΣ	of articles of definite length, i.e. discrete articles	18925
B29C  43/04		ưѤΡΣ	using movable moulds	1597
B29C  43/06		Ϣ³ưΡΣ	continuously movable	408
B29C  43/08		߱ưΣ	with circular movement	1083
B29C  43/10		ˤΡʤʤޤϥФϤѤΡΣ	Isostatic pressing, i.e. using non-rigid pressure-exerting members against rigid parts or dies	1472
B29C  43/12		ϤޤѤΡΣ	using bags surrounding the moulding material	2147
B29C  43/14		ʳǹԤΡΣ	in several steps	1735
B29C  43/16		¤Σ	Forging	353
B29C  43/18		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. compression moulding around inserts or for coating articles	9741
B29C  43/20		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	6725
B29C  43/22		ĹʪʤΰΣ	of articles of indefinite length	3195
B29C  43/24		Σ	Calendering	9487
B29C  43/26		ʳˤΡʣ£ãͥˡΣ	in several steps(<b>B29C43/30</b> takes precedence)	267
B29C  43/28		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿ΡΣ	incorporating preformed parts or layers, e.g. compression moulding around inserts or for coating articles	1291
B29C  43/30		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	1609
B29C  43/32		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	13994
B29C  43/34		ޤϰ֤ؤζΣ	Feeding the material to the mould or the compression means	9588
B29C  43/36		Ĺʪʡ¨Ϣ³ʪʡ¤뤿ηΣ	Moulds for making articles of definite length, i.e. discrete articles	15377
B29C  43/38		ХνʤͭΡΣ	with means to avoid flashes	479
B29C  43/40		ʤǼʤͭΡΣ	with means for cutting the article	924
B29C  43/42		åʤΤΤΡΣ	for undercut articles	708
B29C  43/44		Ĺʪʤ¤뤿ΰ̼ʡΣ	Compression means for making articles of indefinite length	552
B29C  43/46		Σ	Rollers	3267
B29C  43/48		ɥ쥹٥ȡΣ	Endless belts	591
B29C  43/50		ʤμФΣ	Removing moulded articles	6154
B29C  43/52		ǮޤѡΣ	Heating or cooling	11319
B29C  43/54		ѤѲ㡥̡Σ	Compensating volume change, e.g. retraction	235
B29C  43/56		̤ξ㡥ǤΰΣ	Compression moulding under special conditions, e.g. vacuum	2093
B29C  43/58		̡ޤĴΣ	Measuring, controlling or regulating	8147
B29C  44/00		ȯˤ㡥ĥޤȯˢΣ	Shaping by internal pressure generated in the material, e.g. swelling or foaming	8395
B29C  44/02		ĹΡĤޤϢ³ʪʤΤΡΣ	for articles of definite length, i.e. discrete articles	4586
B29C  44/04		Ū⤷ʪŪ˰ۤʤ뾯ʤȤ⣲κʤ롤㡥ۤʤ̩٤äΣ	consisting of at least two parts of chemically or physically different materials, e.g. having different densities	2231
B29C  44/06		¿ؤʪʤΣ	Making multilayered articles	1142
B29C  44/08		ʣĥʳѤΣ	using several expanding steps	864
B29C  44/10		ĥ˵հѤΣ	Applying counter-pressure during expanding	401
B29C  44/12		ͽʤξ˺뤤롤㡥ʪޤ䶯Σ	Incorporating or moulding on preformed parts, e.g. inserts or reinforcements	6241
B29C  44/14		饤˥󥰤Ǥ褦ͽʡΣ	the preformed part being a lining	1643
B29C  44/16		ĥˤä줿Σ	shaped by the expansion of the material	390
B29C  44/18		餫äƤäƶΣ	Filling preformed cavities	2072
B29C  44/20		ĹʪʤΤΡΣ	for articles of indefinite length	838
B29C  44/22		Ū⤷ʪŪ˰ۤʤ뾯ʤȤ⣲κʤ롤㡥ۤʤ̩٤äΣ	consisting of at least two parts of chemically or physically different materials, e.g. having different densities	495
B29C  44/24		¿ؤʪʤΣ	Making multilayered articles	423
B29C  44/26		ʣĥʳѤΣ	using several expanding steps	99
B29C  44/28		Ϣ³Ūưɽ̾ĥΣ	Expanding the moulding material on continuous moving surfaces	424
B29C  44/30		ɥ쥹٥Ȥȥ顼Ȥδ֤ĥΣ	Expanding the moulding material between endless belts or rollers	752
B29C  44/32		ͽʤξ˺뤤롤㡥饤˥󥰡ʪޤ䶯Σ	Incorporating or moulding on preformed parts, e.g. linings, inserts or reinforcements	1446
B29C  44/34		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	16864
B29C  44/36		٤ζΣ	Feeding the material to be shaped	1349
B29C  44/38		ĺ֤ؤΡ㡥Ĺʪʤ뤿Σ	into a closed space, i.e. to make articles of definite length	1183
B29C  44/40		Ϥˤ롤㡥¤ˤΣ	by gravity, e.g. by casting	376
B29C  44/42		ϺѤ㡥ͽФˤޤϿˤΣ	using pressure difference, e.g. by injection or by vacuum	2295
B29C  44/44		ĥǽγҤޤϥӡηǡΣ	in the form of expandable particles or beads	1007
B29C  44/46		֤ޤưɽ̤ؤΡĤޤꡤĹʪʤ뤿ΡΣ	into an open space or onto moving surfaces, i.e. to make articles of indefinite length	712
B29C  44/48		Ϥˤ롤㡥ưɽ̤ξ塤ޤϤδ֤Ǥ¤Σ	by gravity, e.g. casting onto, or between, moving surfaces	88
B29C  44/50		ϺѤ㡥ФˤޤϿ᤭ĤˤΣ	using pressure difference, e.g. by extrusion or by spraying	1165
B29C  44/52		ưɽ̴֤ΡΣ	between moving surfaces	48
B29C  44/54		ĥǽγҤޤϥӡηǡΣ	in the form of expandable particles or beads	109
B29C  44/56		ʪʤθ㡥ѹ뤿Σ	After-treatment of articles, e.g. for altering the shape	2850
B29C  44/58		Σ	Moulds	7939
B29C  44/60		̡桤ޤĴΣ	Measuring, controlling or regulating	3467
B29C  45/00		ͽ¨̤Υ𤷤ĺήΡΤ֡ʼͽХ֥£ãˡΣ	Injection moulding, i.e. forcing the required volume of moulding material through a nozzle into a closed mould; Apparatus therefor(injection blow-moulding <b>B29C49/06</b>)	45180
B29C  45/02		ȥ󥹥ե¨̤ץ󥸥ˤäƥåȥӥƥ鷿ӥƥذΡΣ	Transfer moulding, i.e. transferring the required volume of moulding material by a plunger from a "shot" cavity into a mould cavity	5763
B29C  45/03		ͽʥȥ󥹥ե£ãˡΣ	Injection moulding apparatus(transfer moulding <b>B29C45/02</b>)	8075
B29C  45/04		ưⷿѤΡʣ£ãͥˡΣ	using movable moulds(<b>B29C45/08</b> takes precedence)	3051
B29C  45/06		ơ֥ˤΡΣ	on a turntable	2934
B29C  45/07		ưʼͽХ˥åȤѤΡΣ	using movable injection units	1359
B29C  45/08		ͽй˷Ȥä˰ưΡΣ	moving with the mould during the injection operation	126
B29C  45/10		ߤ˰ۤä֤⤷ȹ碌ǻѤǤⷿޤϼͽХ˥åȤѤΡΣ	using moulds or injection units usable in different arrangements or combinations to each other	895
B29C  45/12		ĤޤϤʾθⷿѤΡ㡥ǥ༰Σ	using two or more fixed moulds, e.g. in tandem	965
B29C  45/13		ĤζⷿȶƯ룲ĤޤϤʾμͽХ˥åȤѤΡΣ	using two or more injection units co-operating with a single mould	1108
B29C  45/14		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤؤޤʪʤʤ뤿μͽΣ	incorporating preformed parts or layers, e.g. injection moulding around inserts or for coating articles	60551
B29C  45/16		¿ؤޤ¿ʪʤ¤Σ	Making multilayered or multicoloured articles	19520
B29C  45/17		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	55375
B29C  45/18		ͽؤκζΣ	Feeding the material into the injection moulding apparatus	14135
B29C  45/20		ͽХΥΣ	Injection nozzles	6115
B29C  45/22		ʣΥΣ	Multiple nozzle systems	1040
B29C  45/23		֡Σ	Feed stopping equipment	2327
B29C  45/24		֡Σ	Cleaning equipment	808
B29C  45/26		ⷿΣ	Moulds	97717
B29C  45/27		ץ롼¡Σ	Sprue channels	23226
B29C  45/28		μ֡Σ	Closure devices therefor	5185
B29C  45/30		ץ롼֤Ƥήʡ㡥ȥȡԡɡɡΣ	Flow control means disposed within the sprue channel, e.g. "torpedo" construction	1612
B29C  45/32		˴ֳ֤֤֤ƤʣζⷿӥƥͭΡΣ	having several axially spaced mould cavities	3516
B29C  45/33		㡥;˰ưǤⷿʤͭΡΣ	having transversely, e.g. radially, movable mould parts	22071
B29C  45/34		٥֤ͭΡΣ	having venting means	7947
B29C  45/36		ַޤϿ碌ʤͭΡΣ	having means for locating or centering cores	3938
B29C  45/37		ӥƥɡΣ	Mould cavity walls	5751
B29C  45/38		ץ롼ޤϥ󥲡ȤΤ֡Σ	Cutting-off equipment for sprues or ingates	11379
B29C  45/40		ʤμФޤͤФΣ	Removing or ejecting moulded articles	47189
B29C  45/42		鷿ʴ֤ذưʤѤΡΣ	using means movable from outside the mould between mould parts	8334
B29C  45/43		ðήΤѤΡΣ	using fluid under pressure	2950
B29C  45/44		åʤΤΤΡΣ	for undercut articles	11294
B29C  45/46		Ѽޤ϶ⷿ˰뤿μʡΣ	Means for plasticising or homogenising the moulding material or forcing it into the mould	4226
B29C  45/47		塼ѤΡʣ£ãͥˡΣ	using screws(<b>B29C45/54</b> takes precedence)	3155
B29C  45/48		塼ڤӼͽХ塼Σ	Plasticising screw and injection screw	565
B29C  45/50		˲ưʥ塼Σ	Axially movable screw	3975
B29C  45/52		ήɻ֡Σ	Non-return devices	926
B29C  45/53		ͽХޤϥԥȥѤΡΣ	using injection ram or piston	3038
B29C  45/54		塼ͭΡΣ	and plasticising screw	1897
B29C  45/56		ͽޤϼͽи˲ưʶⷿʤѤΡ㡥ͽаΣ	using mould parts movable during or after injection, e.g. injection-compression moulding	4783
B29C  45/57		ظùϤѤΡΣ	Exerting after-pressure on the moulding material	1806
B29C  45/58		Σ	Details	3226
B29C  45/60		塼Σ	Screws	2971
B29C  45/62		ХޤϥΣ	Barrels or cylinders	2149
B29C  45/63		٥ȤޤϥȴʡΣ	Venting or degassing means	1370
B29C  45/64		Ĥޤϥ֡Σ	Mould opening, closing or clamping devices	6830
B29C  45/66		Σ	mechanical	7289
B29C  45/67		հΣ	hydraulic	6755
B29C  45/68		հΣ	hydro-mechanical	2150
B29C  45/70		Ĥޤϥ֤Ȥ߹碌⤷϶ѼޤϷ˰뤿μʡΣ	Means for plasticising or homogenising the moulding material or forcing it into the mould, combined with mould opening, closing or clamping devices	1815
B29C  45/72		ǮޤѡΣ	Heating or cooling	8831
B29C  45/73		ⷿΡΣ	of the mould	35578
B29C  45/74		ͽХ˥åȤΡΣ	of the injection unit	6374
B29C  45/76		̡ޤĴΣ	Measuring, controlling or regulating	21969
B29C  45/77		®٤ޤϰϤΡΣ	of velocity or pressure of moulding material	6997
B29C  45/78		٤ΡΣ	of temperature	10199
B29C  45/80		ⷿʤа֤ΡΣ	of relative position of mould parts	3238
B29C  45/82		ήβϩΡΣ	Hydraulic circuits	2644
B29C  45/83		ʡΣ	Lubricating means	1380
B29C  45/84		֡Σ	Safety devices	5873
B29C  48/00		ʤηͿޤϥΥ̤򲡤ФΡΤ֡ʲХ֥£ãˡΣ	Extrusion moulding, i.e. expressing the moulding material through a die or nozzle which imparts the desired form; Apparatus therefor(extrusion blow-moulding <b>B29C49/04</b>)	13574
B29C  48/02		е㡥ޤϼ¸ѲеΣ	Small extruding apparatus, e.g. handheld, toy or laboratory extruders	490
B29C  48/025		ǤΰŪ֤ޤϥ쥤ȡΣ	General arrangement or layout of plant	883
B29C  48/03		лβФ줿ηħΤΡΣ	characterised by the shape of the extruded material at extrusion 	5527
B29C  48/04		γΤΡ¤γ££ˡΣ	Particle-shaped(making granules <b>B29B9/00</b>)	2128
B29C  48/05		եȾΤΡ㡥ȥɡΣ	Filamentary, e.g. strands	7010
B29C  48/06		ΤΡΣ	Rod-shaped	5412
B29C  48/07		ʿ̾ΤΡ㡥ѥͥΣ	Flat, e.g. panels	6334
B29C  48/08		ΤΡ㡥եΣ	flexible, e.g. films	14695
B29C  48/09		ʬŪޤϴĺƶ̤ͭΡ㡥ѥפޤϥͥΣ	Articles with cross-sections having partially or fully enclosed cavities, e.g. pipes or channels	14790
B29C  48/10		ΤΡ㡥֥եΣ	flexible, e.g. blown foils	6565
B29C  48/11		İʾʬŪޤϴĺƶޤΡ㡥ϥ˥ΤΡΣ	comprising two or more partially or fully enclosed cavities, e.g. honeycomb-shaped	1448
B29C  48/12		̤Ե§ʳͭΡ㡥ΥץեΣ	Articles with an irregular circumference when viewed in cross-section, e.g. window profiles	4362
B29C  48/13		ĹѲ̤ͭΡ㡥ȷɡΣ	Articles with a cross-section varying in the longitudinal direction, e.g. corrugated pipes	2081
B29C  48/14		üʲоħΤΡ㡥Ĵ줿ʷϵޤϿưѤΡΣ	characterised by the particular extruding conditions, e.g. in a modified atmosphere or by using vibration	505
B29C  48/15		餫줿ʤޤؾʪʤȰβΡ㡥ʪμϤβΣ	incorporating preformed parts or layers, e.g. extrusion moulding around inserts	3037
B29C  48/151		ʪʤʤΣ	Coating hollow articles	1395
B29C  48/152		̤ʤΣ	the inner surfaces thereof	165
B29C  48/153		⳰ξ̤ʤΣ	Coating both inner and outer surfaces	458
B29C  48/154		ʪʤʤʤʪʡΣ	Coating solid articles, i.e. non-hollow articles	3586
B29C  48/155		ʬʤΣ	Partial coating thereof	505
B29C  48/156		İʾʪʤƱʤΣ	Coating two or more articles simultaneously	527
B29C  48/157		Ϣ뤵줿ʪʤ㡥Σ	Coating linked inserts, e.g. chains	165
B29C  48/16		İʾιǤޤΡ㡥ءΣ	Articles comprising two or more components, e.g. co-extruded layers	1325
B29C  48/17		ۤʤ뿧ͭΡΣ	the components having different colours	892
B29C  48/18		ʣؤͭΡΣ	the components being layers	3797
B29C  48/19		ؤߤ˱ܹ礵줿ΡΣ	the layers being joined at their edges	504
B29C  48/20		ؤΣĤȥåפǤΡ㡥ʬŪޤ줿ȥåסΣ	one of the layers being a strip, e.g. a partially embedded strip	249
B29C  48/21		ؤߤ̤ܹ礵줿ΡΣ	the layers being joined at their surfaces	5190
B29C  48/22		ؤ礹ʡ㡥ؤޤڤߡѤΡΣ	with means connecting the layers, e.g. tie layers or undercuts	190
B29C  48/23		ؤɤμʡ㡥ΥǽؤηΤμʡѤΡΣ	with means for avoiding adhesion of the layers, e.g. for forming peelable layers	69
B29C  48/25		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	12249
B29C  48/255		ήʡ㡥ۡʬ۴£ãˡΣ	Flow control means, e.g. valves(flow dividers <b>B29C48/695</b>)	574
B29C  48/265		ٻ¤ޤѴ桤㡥ե졼Σ	Support structures or bases for apparatus, e.g. frames	1064
B29C  48/27		ѡɻߡΣ	Cleaning; Purging; Avoiding contamination	5479
B29C  48/275		ͥ륮ޤϺκޤϺѡΣ	Recovery or reuse of energy or materials	974
B29C  48/28		Ф줿ݴɡ㡥夲ޤѤ߽Ť͡Σ	Storing of extruded material, e.g. by winding up or stacking	2072
B29C  48/285		еؤβкζΣ	Feeding the extrusion material to the extruder	12948
B29C  48/29		ΤǡΣ	in liquid form	1463
B29C  48/295		ΤǡΣ	in gaseous form	172
B29C  48/30		ХΥޤϥʲʪʤηޤ̤ħΤ벡У£ãˡΣ	Extrusion nozzles or dies(extrusion characterised by the shape or cross-section of the extruded article <b>B29C48/03</b>)	12219
B29C  48/305		ͭΡ㡥ѡΣ	having a wide opening, e.g. for forming sheets	6669
B29C  48/31		ĴǽʤΡΣ	adjustable	2366
B29C  48/315		ߤ˿ưʬͭΡΣ	with parts oscillating relative to each other	145
B29C  48/32		ɾͭΡ㡥ɾʪʤ뤿ΤΡΣ	with annular openings, e.g. for forming tubular articles	9695
B29C  48/325		ĴǽʤΡΣ	adjustable	2051
B29C  48/33		ߤ˲žʬͭΡΣ	with parts rotatable relative to each other	1172
B29C  48/335		Ʊ֤줿¿شɾХΥ롤㡥¿شɾʪʤ¤ΤΤΡΣ	Multiple annular extrusion nozzles in coaxial arrangement, e.g. for making multi-layered tubular articles	1716
B29C  48/34		إåɴɾХΥ롤ʤƱͽʤʤ뤿ΤΡΣ	Cross-head annular extrusion nozzles, i.e. for simultaneously receiving moulding material and the preform to be coated	2997
B29C  48/345		ƱʣΥȥɤ򲡤Ф˶ܤ֤줿İʾΥݡȤޤಡХΥ롤㡥ڥåȲΤΤΡΣ	Extrusion nozzles comprising two or more adjacently arranged ports, for simultaneously extruding multiple strands, e.g. for pelletising	2891
B29C  48/35		ͭΡΣ	with rollers	972
B29C  48/355		Ф줿ʪѥ٥Σ	Conveyors for extruded articles	6181
B29C  48/36		⤷϶Ѽ뤿ޤϲХΥ⤷ϥ̤μʡΣ	Means for plasticising or homogenising the moulding material or forcing it through the nozzle or die	857
B29C  48/365		ݥפѤΡ㡥ԥȥݥסΣ	using pumps, e.g. piston pumps	235
B29C  48/37		ݥסΣ	Gear pumps	505
B29C  48/375		İʾʳޤ֡Ѽ֤ޤ϶֡Σ	Plasticisers, homogenisers or feeders comprising two or more stages	345
B29C  48/38		ƱХˤ룲İʾϢ³֤줿塼ѤΡΣ	using two or more serially arranged screws in the same barrel	1559
B29C  48/385		ۤʤХˤ룲İʾϢ³֤줿塼ѤΡΣ	using two or more serially arranged screws in separate barrels	651
B29C  48/39		裱βеˤͻʪ裲βеְ֤˶뤵ΡΣ	a first extruder feeding the melt into an intermediate location of a second extruder	453
B29C  48/395		ƯХ˰Ϥޤ줿塼ѤΡ㡥켴塼еΣ	using screws surrounded by a cooperating barrel, e.g. single screw extruders	8004
B29C  48/40		İʾʿԤʥ塼ѤΡ㡥󼴥塼еΣ	using two or more parallel screws, e.g. twin screw extruders	4413
B29C  48/405		߹礦Ʊž塼Σ	Intermeshing co-rotating screws	1060
B29C  48/41		߹礦ȿž塼Σ	Intermeshing counter-rotating screws	682
B29C  48/415		ʬŪˤ߹ʤ塼ͭΡΣ	and having partially non-intermeshing screws	27
B29C  48/42		ƱǤʤޤϹƤʤ塼Σ	Non-identical or non-mirrored screws	82
B29C  48/425		İʾΥ塼ѤΡϢ³֤줿塼£ã£ãˡΣ	using three or more screws(serially arranged screws <b>B29C48/38</b>, <b>B29C48/385</b>)	246
B29C  48/43		󥰲еΣ	Ring extruders	101
B29C  48/435		塼Σ	Sub-screws	97
B29C  48/44		ͷ塼Σ	Planetary screws	362
B29C  48/445		Ʊ֤줿塼ʤ¾֤줿ΡΣ	Coaxially arranged screws, i.e. one within the other	220
B29C  48/45		˲ưʥ塼Σ	Axially movable screws	371
B29C  48/455		ߤ˱֤褦֤줿塼㡥̡Υ塼ä֤졤ȿ˶뤹ΡΣ	Screws arranged to convey material towards each other, e.g. separate screws arranged after each other and feeding in opposite directions	184
B29C  48/46		ѤΡΣ	using vanes	237
B29C  48/465		ѤΡΣ	using rollers	326
B29C  48/47		ǥѤΡ㡥Ʊ֤줿ǥڤӲžǥδ֤̲ᤵ뤳ȤˤΡΣ	using discs, e.g. plasticising the moulding material by passing it between a fixed and a rotating disc that are coaxially arranged	256
B29C  48/475		ԥȥ󡤥졼ޤϥץ쥹ѤΡΣ	using pistons, accumulators or press rams	1280
B29C  48/48		İʾΥޤϥԥȥѤΡΣ	Two or more rams or pistons	171
B29C  48/485		ſ尵ˤ벡СΣ	Hydrostatic extrusion	14
B29C  48/49		ĤΥޤϥΥ˶뤹룲İʾβеѤΡΣ	using two or more extruders to feed one die or nozzle	1653
B29C  48/495		եɥ֥åʣιǤβ£ãˡΣ	Feedblocks(extrusion moulding of multi-component articles <b>B29C48/16</b>)	244
B29C  48/50		еκΣ	Details of extruders	2449
B29C  48/505		塼Σ	Screws	1674
B29C  48/51		ήϩͭΡ㡥ͻѡΣ	with internal flow passages, e.g. for molten material	214
B29C  48/515		ήѡ㡥ȯˢޡΣ	for auxiliary fluids, e.g. foaming agents	349
B29C  48/52		Ĺ˱äѲ볰¤ͭΡ㡥ۤʤͥꥢ󥹤뤿ΤΡΣ	with an outer diameter varying along the longitudinal axis, e.g. for obtaining different thread clearance	418
B29C  48/525		߿塼Σ	Conical screws	574
B29C  48/53		ѲͥͭΡ㡥ĹΥ塼ľ¤ѤΡΣ	having a varying channel depth, e.g. varying the diameter of the longitudinal screw trunk	954
B29C  48/535		Ĺ˱äƥͥԥåѲΡΣ	with thread pitch varying along the longitudinal axis	761
B29C  48/54		¥ǤͭΡΣ	with additional forward-feeding elements	229
B29C  48/55		ήǤͭΡΣ	having reverse-feeding elements	297
B29C  48/56		ͥޤϥͥʳ˹¤ޤ϶ƶͭΡΣ	having grooves or cavities other than the thread or the channel	281
B29C  48/565		ͥʳͽͭΡ㡥ԥΣ	having projections other than the thread, e.g. pins	419
B29C  48/57		ϣǥǤͭΡ㡥ʱ߷ǡΣ	provided with kneading disc-like elements, e.g. with oval-shaped elements	547
B29C  48/575		ͻʪ򤻤Ǥ뤿γƱ߷ǡʤǥǡͭΡΣ	provided with elements of a generally circular cross-section for shearing the melt, i.e. shear-ring elements	137
B29C  48/58		ǡʤͻʪεήɻߤΤγƱ߷ڤӥơѡǡͭΡΣ	provided with seal ring elements, i.e. elements of generally circular and tapered shape for preventing the back flow of the melt	102
B29C  48/585		ήߺѤ륮ͭΡΣ	provided with gears interacting with the flow	105
B29C  48/59		ͥκʤ륹塼ñΥͥħΤΡΣ	characterised by details of the thread, i.e. the shape of a single thread of the material-feeding screw	341
B29C  48/595		ԶѰͭͥΣ	the thread having non-uniform width	73
B29C  48/60		ͥĺΣ	Thread tops	190
B29C  48/605		³ŪʥͥΣ	the thread being discontinuous	148
B29C  48/61		ȾץեͭͥΣ	Threads having wavy profiles	22
B29C  48/615		Ѳ餻ѤͭͥΣ	Threads having varying helix angles	55
B29C  48/62		ͥͥηħΤΡ㡥շΤΡΣ	characterised by the shape of the thread channel, e.g. U-shaped	218
B29C  48/625		塼γ¤Ф륹塼ΤͤĹΨħΡΣ̡ΨϡΣ	characterised by  the ratio of the threaded length of the screw to its outside diameter [L/D ratio]	511
B29C  48/63		ǤޤϥͥޤޤʤʬͭΡʤͭΡΣ	having sections without mixing elements or threads, i.e. having cylinder shaped sections	219
B29C  48/635		пž塼濴ʳμμž륹塼Σ	Eccentrically rotating screws; Screws revolving around an axis other than their central axis	62
B29C  48/64		ʾΥͥͭ륹塼Σ	Screws with two or more threads	380
B29C  48/645		ܤͥӥͥ뤬Ʊι¤ǤΡΣ	neighbouring threads and channels having identical configurations	63
B29C  48/65		ܤͥӥͥ뤬ۤʤ빽¤ǤΡ㡥ĤΥͥܤͥ㤤ΡΣ	neighbouring threads or channels having different configurations, e.g. one thread being lower than its neighbouring thread	293
B29C  48/655		ʾΥͥͭΡΣ	having three or more threads	176
B29C  48/66		ХꥢͥʤͥͥȤޤߡͥưΤ˥Х˥ꥢ󥹤ͿΡΣ	Barrier threads, i.e. comprising primary and secondary threads whereby the secondary thread provides clearance to the barrel for material movement	86
B29C  48/67		롼ף£ã£ãʬवʤʤȤ߹蘆줿ΡΣ	having incorporated mixing devices not provided for in groups <b>B29C48/52 to B29C48/66</b> 	1956
B29C  48/68		ХޤϥΣ	Barrels or cylinders	1445
B29C  48/685		̤ħΤΡ㡥¡ͽޤϥͥͭΡΣ	characterised by their inner surfaces, e.g. having grooves, projections or threads	274
B29C  48/69		ѥե륿ޤϥ꡼Σ	Filters or screens for the moulding material	1369
B29C  48/691		ե륿괹Τ֡㡥ߤ˻Ѥ뤿Ĥߤ줿ե륿ͭΡΣ	Arrangements for replacing filters, e.g. with two parallel filters for alternate use	580
B29C  48/692		ܤΰϢ³ƻѤ뤿ִǽʥַΤΡΣ	in the form of webs displaceable for using adjacent areas consecutively	139
B29C  48/693		еΥ塼ü˼դ졤塼˿ľʼ¼Ūʿóʥե륿Σ	Substantially flat filters mounted at the end of an extruder screw perpendicular to the feed axis	497
B29C  48/694		ޤϱ߿ե륿Σ	Cylindrical or conical filters	278
B29C  48/695		ʬ۴㡥֥졼ץ졼ȡΣ	Flow dividers, e.g. breaker plates	326
B29C  48/70		ͻήʬ䡤ʬӺƷ礹뤿μʤޤΡΣ	comprising means for dividing, distributing and recombining melt flows	411
B29C  48/71		¿زΤΤΡʣιǤβ£ãˡΣ	for layer multiplication(extrusion of multi-component articles <b>B29C48/16</b>)	184
B29C  48/72		եɥХåʡʤͻΰ򲡽еξή˥եɥХåΡΣ	Feedback means, i.e. part of the molten material being fed back into upstream stages of the extruder	110
B29C  48/74		Хѥʡʤͻΰ򲡽еβήر󤹤ΡΣ	Bypassing means, i.e. part of the molten material being diverted into downstream stages of the extruder	265
B29C  48/76		٥ȼʡȴʡΣ	Venting means; Degassing means	4348
B29C  48/78		ޤϤ餫줿ʤ⤷ؾʪʤǮ㡥ǮޤѡΣ	Thermal treatment of the extrusion moulding material or of preformed parts or layers, e.g. by heating or cooling	558
B29C  48/79		餫줿ʤޤؾʪʤǮΣ	of preformed parts or layers	201
B29C  48/793		ξήˤǮ㡥ۥåѡǤβǮΣ	upstream of the plasticising zone, e.g. heating in the hopper	1935
B29C  48/797		ѡΣ	Cooling	255
B29C  48/80		ˤǮ㡥βǮΣ	at the plasticising zone, e.g. by heating cylinders	3378
B29C  48/82		ѡʣ£ãͥˡΣ	Cooling(<b>B29C48/84</b> takes precedence)	1110
B29C  48/84		塼βǮޤѤˤΡ塼ѣ£ãˡΣ	by heating or cooling the feeding screws(for hollow screws <b>B29C48/515</b>)	322
B29C  48/85		ѡΣ	Cooling	404
B29C  48/86		ΥˤǮΣ	at the nozzle zone	1407
B29C  48/87		ѡΣ	Cooling	1631
B29C  48/875		ԶѰ첹ʬۤã뤿ΤΡ㡥ȲǮȤͭХѤΡΣ	for achieving a non-uniform temperature distribution, e.g. using barrels having both cooling and heating zones	286
B29C  48/88		Ф줿ήǮ㡥ѡΣ<br><br><b><ul></ul></b><br>Υ롼פʬहȤʤη֤ޤϷϡ˥롼ף£ã£ãˤʬह롣	Thermal treatment of the stream of extruded material, e.g. cooling; <br><br><b><u>Note(s)</u></b><br><br><ul><li>When classifying in this group, forms or shapes of products are further classified in groups <b>B29C48/03 to B29C48/13</b> .</li></ul>	6509
B29C  48/885		¦ν㡥ɾեѤΤ˥󥰤ѤΡΣ	External treatment, e.g. by using air rings for cooling tubular films	6308
B29C  48/89		¦ν㡥ήΤѤΡΣ	Internal treatment, e.g. by applying an internal cooling fluid stream	259
B29C  48/90		֥졼ޤϥ󥰤򤪤ʤΡʤʪʤκǽˡθޤĴȤ߹碌ΡΣ	with calibration or sizing, i.e. combined with fixing or setting of the final dimensions of the extruded article	6166
B29C  48/91		Ǯ㡥ͶΤΤΡΣ	Heating, e.g. for cross linking	1527
B29C  48/92		̡ޤĴΣ	Measuring, controlling or regulating	30567
B29C  48/94		Σ	Lubricating	487
B29C  48/95		˽ޤäΡΣ	by adding lubricant to the moulding material	203
B29C  48/96		֡Σ	Safety devices	1160
B29C  49/00		֥¨ץեޤϥѥ꥽ǽ˥֥ΡΤ֡Σ	Blow-moulding, i.e. blowing a preform or parison to a desired shape within a mould; Apparatus therefor	12163
B29C  49/02		ץեޤϥѥ꥽¤ȥ֥Ȥȹ蘆줿ΡΣ	Combined blow-moulding and manufacture of the preform or the parison	2238
B29C  49/04		Х֥Σ	Extrusion blow-moulding	9650
B29C  49/06		ͽХ֥Σ	Injection blow-moulding	8442
B29C  49/08		֥ˤ󼴱俭Σ	Biaxial stretching during blow-moulding	2597
B29C  49/10		ŪʤѤΡΣ	using mechanical means	391
B29C  49/12		俭åɡΣ	Stretching rods	1777
B29C  49/14		סΣ	Clamps	243
B29C  49/16		ϺѤΡ㤨Хץ֥󥰡Σ	using pressure difference, e.g. pre-blowing	427
B29C  49/18		ʣʳǼ»ܤΡʣ£ãͥˡΣ	using several blowing steps(<b>B29C49/16</b> takes precedence)	908
B29C  49/20		ʪޤ䶯ͭʪʤ¤Σ	of articles having inserts or reinforcements	2958
B29C  49/22		¿ؤΥץեޤϥѥ꥽ѤΡΣ	using multilayered preforms or parisons	3446
B29C  49/24		饤˥󥰤ޤϥ٥󥰡Σ	Lining or labelling	1710
B29C  49/26		ɾ̤Υ饤˥󥰡Σ	inner lining of tubes	212
B29C  49/28		֥֡Σ	Blow-moulding apparatus	2527
B29C  49/30		ưޤϲưʤѤΡΣ	having movable moulds or mould parts	874
B29C  49/32		ưΡΣ	moving "to and fro"	560
B29C  49/34		ư뷿ʡΣ	the mould parts moving "hand-over-hand"	68
B29C  49/36		켴β˲žΡΣ	rotatable about one axis	1483
B29C  49/38		ưɥ쥹ٻξ˺֤줿ΡΣ	mounted on movable endless supports	365
B29C  49/40		ɥȶưΡΣ	on co-operating drums	36
B29C  49/42		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	13451
B29C  49/44		ıΤ̤ˤäưϤѤ뤿ΤΡΣ	for applying pressure through the walls of an inflated bag	291
B29C  49/46		δĶޤ϶ʳΥ֥ήΤѤˤäħŤΡΣ	characterised by using particular environment or blow fluids other than air	1161
B29C  49/48		ⷿΣ	Moulds	8865
B29C  49/50		ǤޤϥХνʤͭΡΣ	having cutting or deflashing means	1357
B29C  49/52		ޤϰʤĤΡΣ	having decorating or printing means	266
B29C  49/54		åʤΤΤΡΣ	for undercut articles	517
B29C  49/56		Ĥޤϥ׼ʡΣ	Opening, closing or clamping means	3291
B29C  49/58		֥ʡΣ	Blowing means	2958
B29C  49/60		֥ˡɥΣ	Blow-needles	835
B29C  49/62		٥֡Σ	Venting means	571
B29C  49/64		ץեࡤѥ꥽ޤϥ֥ʤβǮޤѡΣ	Heating or cooling preforms, parisons or blown articles	5952
B29C  49/66		֥Ƴ줿ޤˤѡΣ	Cooling by refrigerant introduced into the blown article	660
B29C  49/68		ä˥ץեޤϥѥ꥽Ǯ뤿Υ֥Σ	Ovens specially adapted for heating preforms or parisons	1189
B29C  49/70		֥ʤζⷿμ賰ޤͽФΣ	Removing or ejecting blown articles from the mould	1820
B29C  49/72		ⷿΥХνΣ	Deflashing outside the mould	759
B29C  49/74		ͥåΥХνΣ	Deflashing the neck portion	342
B29C  49/76		ͥå֥졼Σ	Neck calibration	405
B29C  49/78		̡ޤĴΣ	Measuring, controlling or regulating	3781
B29C  49/80		㡥ϳ̤ΤΡΣ	Testing, e.g. for leaks	534
B29C  51/00		Ǯ㡥ޥåɥ⡼ˤ륷ȤޤϿʤˤΤ֡Σ	Shaping by thermoforming, e.g. shaping sheets in matched moulds or by deep-drawing; Apparatus therefor	9149
B29C  51/02		Ǯȥץե¤Ȥȹ礻Σ	Combined thermoforming and manufacture of the preform	1558
B29C  51/04		Ǯͽ俭㡥󼴱俭Ȥȹ礻Σ	Combined thermoforming and prestretching, e.g. biaxial stretching	972
B29C  51/06		ϺѤΡΣ	using pressure difference	423
B29C  51/08		ʤޤϥޥåɥ⡼¨ŪʤΤߤѤΡΣ	Deep-drawing or matched-mould forming, i.e. using mechanical means only	4821
B29C  51/10		Ϻ㡥ˤΣ	Forming by pressure difference, e.g. vacuum	10818
B29C  51/12		ʪޤ䶯ͭʪʤΡΣ	of articles having inserts or reinforcements	1925
B29C  51/14		¿إץեޤϥȤѤΡΣ	using multilayered preforms or sheets	4217
B29C  51/16		饤˥󥰤ޤϥ٥󥰡Σ	Lining or labelling	1675
B29C  51/18		Ǯ֡Σ	Thermoforming apparatus	3469
B29C  51/20		ưⷿޤϲưⷿʤͭΡΣ	having movable moulds or mould parts	682
B29C  51/22		켴β˲žǽʤΡΣ	rotatable about an axis	897
B29C  51/24		ưɥ쥹ٻξ˺֤줿ΡΣ	mounted on movable endless supports	213
B29C  51/26		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	9277
B29C  51/28		ıΤޤϥե̤ˤäưϤѤ뤿ΤΡΣ	for applying pressure through the wall of an inflated bag or diaphragm	486
B29C  51/30		ⷿΣ	Moulds	4737
B29C  51/32		ǼʤͭΡΣ	having cutting means	1479
B29C  51/34		åʤΤΤΡΣ	for undercut articles	808
B29C  51/36		ä˿ΤΡΣ	specially adapted for vacuum forming	3055
B29C  51/38		Ĥޤϥ׼ʡΣ	Opening, closing or clamping means	712
B29C  51/40		٥֡Σ	Venting means	532
B29C  51/42		ǮޤѡΣ	Heating or cooling	7617
B29C  51/44		ʪʤμФޤͽФΣ	Removing or ejecting moulded articles	2833
B29C  51/46		̡ޤĴΣ	Measuring, controlling or regulating	2159
B29C  53/00		ʤޤߡҤͤꡤľޤʿ̲ˤΤ֡ʣ£ãͥˡΣ	Shaping by bending, folding, twisting, straightening or flattening; Apparatus therefor(<b>B29C61/10</b> takes precedence)	6327
B29C  53/02		ʤޤޤߡʣ£ã£ã£ã£ãͥˡΣ	Bending or folding(<b>B29C53/22</b>, <b>B29C53/34</b>, <b>B29C53/36</b>, <b>B29C53/56</b> take precedence)	1910
B29C  53/04		ĤޤϥȤΡΣ	of plates or sheets	4824
B29C  53/06		ץ쥹ޤϹ¤Ťˤ޶ʤηΣ	Forming folding lines by pressing or scoring	1490
B29C  53/08		ɾΤΡΣ	of tubes	2955
B29C  53/10		֥줿ɾեΡ㡥ҤŤΣ	of blown tubular films, e.g. gusseting	260
B29C  53/12		Ρ㡥ץ󥰤¤뤿ΡΣ	helically, e.g. for making springs	393
B29C  53/14		ҤͤΣ	Twisting	274
B29C  53/16		ľޤʿ̲Σ	Straightening or flattening	1220
B29C  53/18		ϥȤΡΣ	of plates or sheets	2297
B29C  53/20		ɾΤΡΣ	of tubes	801
B29C  53/22		ȷŤΣ	Corrugating	186
B29C  53/24		ĤޤϥȤΡΣ	of plates or sheets	605
B29C  53/26		ʿԤȷŤΣ	parallel with direction of feed	242
B29C  53/28		ľѤȷŤΣ	transverse to direction of feed	380
B29C  53/30		ɾΤΡʥ֥ˤΣ£ãˡΣ	of tubes(by blow-moulding <b>B29C49/00</b>)	860
B29C  53/32		봬ʣ£ãͥˡΣ	Coiling(<b>B29C53/56</b> takes precedence)	497
B29C  53/34		󥰡ʴüΣ£ãˡΣ	Rim rolling(of tube ends <b>B29C57/12</b>)	280
B29C  53/36		ʤܹ硤㡥ʪʤ¤뤿Ρʣ£ãͥˡΣ	Bending and joining, e.g. for making hollow articles(                <b>B29C53/56</b> takes precedence)	977
B29C  53/38		¤ʪʤνľѤ˥Ȥޤϥȥåפ޶ʤƤüܹ礹ΡΣ	by bending sheets or strips at right angles to the longitudinal axis of the article being formed and joining the edges	492
B29C  53/40		Ĺʪʡ¨Ϣ³ʪʡΤΤΡΣ	for articles of definite length, i.e. discrete articles	416
B29C  53/42		ɽ̡㡥ޥɥ롤ѤΡΣ	using internal forming surfaces, e.g. mandrels	342
B29C  53/44		ʪʤμβ˲žǤΡΣ	rotatable about the axis of the article	122
B29C  53/46		ɽ̡㡥꡼֡ѤΡΣ	using external forming surfaces, e.g. sleeves	67
B29C  53/48		ĹʤΤΤΡ¨ȥåפʳŪ޶ʤΡΣ	for articles of indefinite length, i.e. bending a strip progressively	506
B29C  53/50		ɽ̡㡥ޥɥ롤ѤΡΣ	using internal forming surfaces, e.g. mandrels	450
B29C  53/52		ɽ̡㡥꡼֡ѤΡΣ	using external forming surfaces, e.g. sleeves	210
B29C  53/54		üΰ⡤ޤϷŤΣ	Guiding, aligning or shaping edges	52
B29C  53/56		դܹ硤㡥ѥդΣ	Winding and joining, e.g. winding spirally	3154
B29C  53/58		ˡΣ	helically	2510
B29C  53/60		ɽ̡㡥ޥɥ롤ѤΡΣ	using internal forming surfaces, e.g. mandrels	2251
B29C  53/62		դβ˲žǽʤΡΣ	rotatable about the winding axis	594
B29C  53/64		˰ưΡΣ	and moving axially	282
B29C  53/66		˰ưǽʴպඡ֡Σ	with axially movable winding feed member	535
B29C  53/68		žǽʴպඡ֡Σ	with rotatable winding feed member	247
B29C  53/70		˰ưΡΣ	and moving axially	114
B29C  53/72		ɽ̤ѤΡΣ	using external forming surfaces	212
B29C  53/74		˺ƽ۴Ĥ륨ɥ쥹٥Ȥηɽ̤ѤΡΣ	using a forming surface in the shape of an endless belt which is recycled after the forming operation	175
B29C  53/76		Ĥ¿βΡΣ	about more than one axis	130
B29C  53/78		۷ȤޤϥȥåפѤΡΣ	using profiled sheets or strips	1015
B29C  53/80		ʡޤ°֡Σ	Component parts, details or accessories; Auxiliary operations	8782
B29C  53/82		ޤϥޥɥΣ	Cores or mandrels	2353
B29C  53/84		ǮޤѡΣ	Heating or cooling	4468
B29C  55/00		俭ˤ㡥̤ưȴΡΤ֡ʣ£ãͥˡΣ	Shaping by stretching, e.g. drawing through a die; Apparatus therefor(<b>B29C61/08</b> takes precedence)	10270
B29C  55/02		ĤޤϥȤΡΣ	of plates or sheets	7922
B29C  55/04		켴俭㡥ФΡΣ	uniaxial, e.g. oblique	2250
B29C  55/06		ʿԤʤΡΣ	parallel with the direction of feed	2523
B29C  55/08		ľѤʤΡΣ	transverse to the direction of feed	1580
B29C  55/10		¿俭Σ	multiaxial	399
B29C  55/12		󼴱俭Σ	biaxial	7505
B29C  55/14		༡󼴱俭Σ	successively	2980
B29C  55/16		Ʊ󼴱俭Σ	simultaneously	1499
B29C  55/18		ɽ̴֡㡥顼֡ǰ䤹ΡΣ	by squeezing between surfaces, e.g. rollers	1536
B29C  55/20		üסΣ	Edge clamps	1374
B29C  55/22		ɾΤΡΣ	of tubes	781
B29C  55/24		Ⱦα俭Σ	radial	752
B29C  55/26		󼴱俭Σ	biaxial	690
B29C  55/28		֥줿ɾեΡ㡥ե졼ˤΡΣ	of blown tubular films, e.g. by inflation	9435
B29C  55/30		̤ưȴΡΣ	Drawing through a die	609
B29C  57/00		ü㡥ե󥸲ùåѾùޤΤ֡Σ	Shaping of tube ends, e.g. flanging, belling or closing; Apparatus therefor	7289
B29C  57/02		åѾùޤϳȸù㡥¤ηȹ蘆줿ΡΣ	Belling or enlarging, e.g. combined with forming a groove	1050
B29C  57/04		ŪʤѤΡΣ	using mechanical means	2098
B29C  57/06		ѷǽʤΡΣ	elastically deformable	174
B29C  57/08		ϺѤΡΣ	using pressure difference	278
B29C  57/10		Σ	Closing	943
B29C  57/12		󥰡Σ	Rim rolling	422
B29C  59/00		ɽ㡥ܥΤ֡Σ	Surface shaping, e.g. embossing; Apparatus therefor	9336
B29C  59/02		Ūʡ㡥ץ쥹ˤΡΣ	by mechanical means, e.g. pressing	12971
B29C  59/04		顼ޤϥɥ쥹٥ȤѤΡΣ	using rollers or endless belts	9312
B29C  59/06		ɥѤΡΣ	using vacuum drums	204
B29C  59/08		бˤΡΣ	by flame treatment	402
B29C  59/10		ŽˤΡΣ	by electric discharge treatment	1499
B29C  59/12		ʳʷϵǤΡΣ	in an environment other than air	235
B29C  59/14		ץ饺޽ˤΡΣ	by plasma treatment	1332
B29C  59/16		ưͥ륮ޤγȼͤˤΡΣ	by wave energy or particle radiation	1984
B29C  59/18		ϡ㡥ץ饹å꡼βˤΡΣ	by liberation of internal stresses, e.g. plastic memory	146
B29C  61/00		ϤβˤϤͭͽΤ¤Τ֡ɽΤΤΣ£ã饤˥ʪʤΤΤΣ£ãͽʤܹΤΤΣ£ãˡΣ	Shaping by liberation of internal stresses; Making preforms having internal stresses; Apparatus therefor(for surface shaping <b>B29C59/18</b>; for lining articles <b>B29C63/38</b>; for joining preformed parts <b>B29C65/66</b>)	6669
B29C  61/02		Ǯ̡Σ	Thermal shrinking	2045
B29C  61/04		ǮıΣ	Thermal expansion	205
B29C  61/06		ϡ㡥ץ饹å꡼ͭͽΤ¤Σ	Making preforms having internal stresses, e.g. plastic memory	4150
B29C  61/08		ɤα俭ˤΡΣ	by stretching tubes	785
B29C  61/10		ĤޤϥȤζʤˤΡΣ	by bending plates or sheets	399
B29C  63/00		饤˥󥰤ޤʤʤץ饹åʤͽ줿غޤʤŬѤΡΤ֡ʣ£ãͥ表֥ˤΣ£ãǮˤΣ£ãˡΣ	Lining or sheathing, i.e. applying preformed layers or sheathings of plastics; Apparatus therefor(<b>B29C73/00</b> takes precedence; by blowing <b>B29C49/00</b>; by thermoforming <b>B29C51/00</b>)	17474
B29C  63/02		ȤޤӾѤΡʣ£ãͥˡΣ	using sheet or web-like material(<b>B29C63/26</b> takes precedence)	17461
B29C  63/04		ޤߡդʤޤμʤˤΡΣ	by folding, winding, bending or the like	1666
B29C  63/06		ɾʪʤμϤؤΡΣ	around tubular articles	1640
B29C  63/08		إꥫ봬դˤΡΣ	by winding helically	249
B29C  63/10		ɾʪʤμϤؤΡΣ	around tubular articles	834
B29C  63/12		ѥ봬դˤΡΣ	by winding spirally	88
B29C  63/14		ɾʪʤμϤؤΡΣ	around tubular articles	207
B29C  63/16		Τޤϥեˤäƥ饤˥󥰤ޤʤܤΡΣ	applied by "rubber" bag or diaphragm	263
B29C  63/18		ɾغޤʤѤΡʣ£ãͥˡΣ	using tubular layers or sheathings(<b>B29C63/26</b> takes precedence)	1426
B29C  63/20		Ϻ㡥ѤΡΣ	using pressure difference, e.g. vacuum	303
B29C  63/22		ʪʤηŬ礷ͭغޤʤѤΡʣ£ãͥˡΣ	using layers or sheathings having a shape adapted to the shape of the article(<b>B29C63/26</b> takes precedence)	921
B29C  63/24		ѤΡΣ	using threads	336
B29C  63/26		̤Υ饤˥󥰤ޤʤʣ£ãͥˡΣ	Lining or sheathing of internal surfaces(<b>B29C63/38</b> takes precedence)	948
B29C  63/28		Τޤϥեˤäƥ饤˥󥰤ޤʤܤΡΣ	applied by "rubber" bag or diaphragm	193
B29C  63/30		ȤޤӾѤΡΣ	using sheet or web-like material	459
B29C  63/32		إꥫ봬դˤΡΣ	by winding helically	573
B29C  63/34		ɾغޤʤѤΡΣ	using tubular layer or sheathings	2999
B29C  63/36		ɾ΢֤ΡΣ	being turned inside out	1114
B29C  63/38		ϤβˤΡΣ	by liberation of internal stresses	185
B29C  63/40		ȤޤӾѤΡΣ	using sheet or web-like material	570
B29C  63/42		ɾغޤʤѤΡΣ	using tubular layers or sheathings	2412
B29C  63/44		ʪʤηŬ礹غޤʤηΣ	the shape of the layers or sheathings being adapted to the shape of the articles	121
B29C  63/46		̤ΡΣ	of internal surfaces	148
B29C  63/48		ɽ̤νΣ	Preparation of the surfaces	1276
B29C  64/00		ղ¤ʤղѡղöŽޤղؤˤ룳ΣġʪΤ¤㡥İˤ롤ƥ쥪꥽եˤޤŪ졼ƷˤΣ	Additive manufacturing, i.e. manufacturing of three-dimensional [3D] objects by additive deposition, additive agglomeration or additive layering, e.g. by 3D printing, stereolithography or selective laser sintering	1398
B29C  64/10		ղ¤ιΣ	Processes of additive manufacturing	2800
B29C  64/106		ΤޤǴΤߤѡ㡥ǴˤϢ³ӡɤΣ	using only liquids or viscous materials, e.g. depositing a continuous bead of viscous material	5669
B29C  64/112		̤αũѡ㡥ʮͥإåɤΣ	using individual droplets, e.g. from jetting heads	3770
B29C  64/118		ͻեȤλѡ㡥ǮͻˡΣƣģ͡ϡΣ	using filamentary material being melted, e.g. fused deposition modelling [FDM]	8597
B29C  64/124		Ū˸ǲ줿ΤؤѡΣ	using layers of liquid which are selectively solidified	4004
B29C  64/129		ΤΥͥ륮ˤħդ롤㡥ޥѤΤؤξȼ͡Σ	characterised by the energy source therefor, e.g. by global irradiation combined with a mask	1721
B29C  64/135		椵줿ͥ륮㡥졼ޤϾιäΣ	the energy source being concentrated, e.g. scanning lasers or focused light sources	2393
B29C  64/141		κΤߤѡΣ	using only solid materials	997
B29C  64/147		Ⱥѡ㡥ˡΣ̣ϣ͡ϤޤϣʪΤζɽ̤˹碌ƥץ쥫åȤ줿Ⱥߥ͡ȡΣ	using sheet material, e.g. laminated object manufacturing [LOM] or laminating sheet material precut to local cross sections of the 3D object	388
B29C  64/153		Ū˷礵줿ʴؤѡ㡥Ūʥ졼ƷޤͻΣ	using layers of powder being selectively joined, e.g. by selective laser sintering or melting	6696
B29C  64/159		ʪΤߤѡ㡥Σ	using only gaseous substances, e.g. vapour deposition	40
B29C  64/165		κήκȹ礻ѡ㡥ޡޡȿޤޤϥͥ륮ۼΤˤŪ˷礵줿ʴΡΣ	using a combination of solid and fluid materials, e.g. a powder selectively bound by a liquid binder, catalyst, inhibitor or energy absorber	3174
B29C  64/171		ʣΣʪΤ¤뤿äŬ礷ΡΣ	specially adapted for manufacturing multiple 3D objects	349
B29C  64/176		硹ˡΣ	sequentially	202
B29C  64/182		¹ԤơΣ	in parallel batches	248
B29C  64/188		ɲä줿ؾɲŪ»ܤΡ㡥ʿ경ޤϸɽ£ãʪʤηѤʤΤ֣£ãˡΣ	involving additional operations performed on the added layers, e.g. smoothing, grinding or thickness control(surface shaping <b>B29C59/00</b>              ; after-treatment of articles without altering their shape <b>B29C71/00</b>              )	1241
B29C  64/194		쥤åפκˡΣ	during lay-up	479
B29C  64/20		ղ¤֡κޤϤΤ°ʡΣ	Apparatus for additive manufacturing; Details thereof or accessories therefor	14807
B29C  64/205		ؤۤʡΣ	Means for applying layers	2189
B29C  64/209		إåɡΥΣ	Heads; Nozzles	10107
B29C  64/214		ɥ֥졼ɡΣ	Doctor blades	1416
B29C  64/218		顼Σ	Rollers	710
B29C  64/223		ޤϥեࡤ㡥غؤĤΥơ󤫤¾˰ư뤿ΤΡΣ	Foils or films, e.g. for transferring layers of building material from one working station to another	202
B29C  64/227		ưʡΣ	Driving means	2791
B29C  64/232		ʿ̤ФƿľưΤΤΡΣ	for motion along the axis orthogonal to the plane of a layer	2452
B29C  64/236		ʿ̤ФƿʿưΤΤΡΣ	for motion in a direction within the plane of a layer	2249
B29C  64/241		žưΤΤΡΣ	for rotary motion	1360
B29C  64/245		ץåȥեޤϴ¤˵ˤ뤳Ȥտޤٻ¤£ãˡΣ	Platforms or substrates(support structures intended to be sacrificed after manufacture <b>B29C64/40</b>              )	7875
B29C  64/25		ϥ󥰡㡥Υϥ󥰡Σ	Housings, e.g. machine housings	1278
B29C  64/255		غѤμǼƴ㡥ʴƴΣ	Enclosures for the building material, e.g. powder containers	2912
B29C  64/259		򴹲ǽΣ	interchangeable	338
B29C  64/264		ȼͤΤ֡Σ	Arrangements for irradiation	3019
B29C  64/268		졼ѡŻҥӡѡΣ	using laser beams; using electron beams [EB]	2768
B29C  64/273		ѥ륹ȿĴΣ	pulsed; frequency modulated	171
B29C  64/277		ʣͼʤλѡ㡥ޥߥ顼ޤʣȯɡΣ̣ţġϡΣ	using multiple radiation means, e.g. micromirrors or multiple light-emitting diodes [LED]	796
B29C  64/282		ƱΤΡ㡥ۤʤ륨ͥ륮٥ѡΣ	of the same type, e.g. using different energy levels	501
B29C  64/286		إե륿㡥ޥΣ	Optical filters, e.g. masks	368
B29C  64/291		Τ뤿ΤΡ㡥ŪŬѤޤޤȿޤȶˡΣ	for operating globally, e.g. together with selectively applied activators or inhibitors	211
B29C  64/295		ǮǻҡΣ	Heating elements	5053
B29C  64/30		ޤΣ	Auxiliary operations or equipment	5762
B29C  64/307		ղ¤˻Ѥμ谷Σ	Handling of material to be used in additive manufacturing	1226
B29C  64/314		ĴΣ	Preparation	4135
B29C  64/321		Σ	Feeding	6246
B29C  64/329		ۥåѡλѡΣ	using hoppers	609
B29C  64/336		İʾκΡΣ	of two or more materials	1833
B29C  64/343		Ĵ̡Σ	Metering	664
B29C  64/35		꡼˥󥰡Σ	Cleaning	4719
B29C  64/357		ѡΣ	Recycling	1745
B29C  64/364		ĶĴΣ	Conditioning of environment	1223
B29C  64/371		ʳδĶѡ㡥ԳΣ	using an environment other than air, e.g. inert gas	648
B29C  64/379		ղ¤줿ʪΤμ谷㡥ܥåȤλѡΣ	Handling of additively manufactured objects, e.g. using robots	3179
B29C  64/386		ղ¤ΤΥǡޤϥǡΣ	Data acquisition or data processing for additive manufacturing	8888
B29C  64/393		ղ¤ޤĴ᤹뤿ΤΡΣ	for controlling or regulating additive manufacturing processes	13274
B29C  64/40		¤ˣʪΤٻġδ˵ˤ뤳Ȥտޤ빽¤Σ	Structures for supporting 3D objects during manufacture and intended to be sacrificed after completion thereof	2269
B29C  65/00		ͽʤܹ硨Τ֡Σ	Joining of preformed parts; Apparatus therefor	40094
B29C  65/02		ðޤðǤβǮˤΡΣ	by heating, with or without pressure	24969
B29C  65/04		ͶŲǮ㡥ܡΣ	Dielectric heating, e.g. high-frequency welding	5126
B29C  65/06		໤ѤΡ㡥žܡΣ	using friction, e.g. spin welding	2897
B29C  65/08		ĶȿưѤΡΣ	using ultrasonic vibrations	13546
B29C  65/10		ǮѤΡΣ	using hot gases	3439
B29C  65/12		ʻѡΣ	and welding bar	575
B29C  65/14		ưͥ륮ޤγȼͤѤΡΣ	using wave energy or particle radiation	2973
B29C  65/16		졼Σ	Laser beam	3931
B29C  65/18		ǮѤΡΣ	using heated tool	12706
B29C  65/20		ľܿˤΡ㡥ѤơΣ	with direct contact, e.g. using "mirror"	6352
B29C  65/22		Ǯ˶Σ	Heated wire	1557
B29C  65/24		βǮʤħΡΣ<br><br><b><ul></ul></b><br>ǮʤκޤŬѤפʾˤΤߤΥ롼פʬह롣Σ	characterised by the means for heating the tool; <br><br><b><u>Note(s)</u></b><br><br><ul><li>Classification is made in this group only if the details or adaptations of the heating means are of interest.  </li></ul>	950
B29C  65/26		ǮήΡΣ	Hot fluid	422
B29C  65/28		бޤϲǳΣ	Flame or combustible material	192
B29C  65/30		ŵŪʡΣ	Electrical means	1433
B29C  65/32		ͶƳΣ	Induction	724
B29C  65/34		ܹ˻αǮѤΡΣ	using heated elements which remain in the joint, e.g. "verlorenes Schweisselement"	2977
B29C  65/36		ͶƳǮΣ	heated by induction	1666
B29C  65/38		ѥ륹ǮΣ	Impulse heating	507
B29C  65/40		ͻʪ㡥ۥåȥȡŬѡѤΣ£ãˤΣ£ãˡΣ	Applying molten plastics, e.g. hot melt(using welding bar <b>B29C65/12</b>; by moulding <b>B29C65/70</b>)	2394
B29C  65/42		餫ΩƤ줿ʴ֤ǡΣ	between pre-assembled parts	995
B29C  65/44		Ǯ줿ץ饹åΥץ饹åȤܹΣ	Joining a heated non-plastics element to a plastics element	1718
B29C  65/46		ͶƳǮΣ	heated by induction	384
B29C  65/48		ޤѤΡΣ	using adhesives	18986
B29C  65/50		ơפѤΡΣ	using adhesive tape	4122
B29C  65/52		ޤŬѡΣ	Applying the adhesive	7211
B29C  65/54		餫ΩƤ줿ʴ֤ǡΣ	between pre-assembled parts	2060
B29C  65/56		ŪʤѤΡΣ	using mechanical means	10310
B29C  65/58		ʥå׷Σ	Snap connection	834
B29C  65/60		٥åȻߤΣ	Riveting	2642
B29C  65/62		˥Σ	Stitching	756
B29C  65/64		ץ饹åΥץ饹åȤܹ硤㡥ðˤΡʣ£ãͥˡΣ	Joining a non-plastics element to a plastics element, e.g. by force(<b>B29C65/44</b> takes precedence)	3939
B29C  65/66		ϤβˤΡ㡥ܹ礵ʤμ̤ˤΡΣ	by liberation of internal stresses, e.g. shrinking of one of the parts to be joined	916
B29C  65/68		ѤΡΣ	using auxiliary shrinkable element	438
B29C  65/70		ˤΡѤѤΤϡϢѤ򻲾ȡˡΣ	by moulding(using a particular moulding technique, <u>see</u> the relevant place for that technique)	4786
B29C  65/72		ʣ繩ˤܹ硤㡥ܤ˥Σ	by combined operations, e.g. welding and stitching	2157
B29C  65/74		ܤǤˤΡΣ	by welding and severing	8512
B29C  65/76		ѵޤϤϤϤǽܹηΣ	Making non-permanent or releasable joints	771
B29C  65/78		ܹ礵ʤμ谷ʡ㡥ƴޤʪʤ¤ΤΤΡΣ	Means for handling the parts to be joined, e.g. for making containers or hollow articles	32475
B29C  65/80		žǽʰʡΣ	Rotatable transfer means	1414
B29C  65/82		ܹθΣ	Testing the joint	1639
B29C  67/00		롼ף£ã£ã£ãޤϣ£ãޤʤѡΣ	Shaping techniques not covered by groups <b>B29C39/00 to B29C65/00</b> , <b>B29C70/00</b> or <b>B29C73/00</b>	29116
B29C  67/02		ŽˤΣ	Moulding by agglomerating	912
B29C  67/04		ƷʲðȤ߹蘆줿Σ£ãˡΣ	Sintering(combined with compression <b>B29C43/00</b>)	2009
B29C  67/06		ŸǡΣ	Coagulating	178
B29C  67/08		꡼㡥ͭ꡼𤷤Ʒɽ̤˲դΡΣ	Screen moulding, e.g. forcing the moulding material through a perforated screen on to a moulding surface	132
B29C  67/20		¿ޤϺ˦ʪʤΤΡ㡥Ƥȯˢץ饹åΡΣ	for porous or cellular articles, e.g. of foam plastics, coarse-pored	6778
B29C  67/24		ˤäħŤ줿ΡΣ	characterised by the choice of material	5221
B29C  69/00		ᥤ󥰥롼ף£ã£ãñѤŸʤʣѡ㡥ܹ絻ѤȤȤ߹碌Τ֡Σ	Combinations of shaping techniques not provided for in a single one of main groups <b>B29C39/00 to B29C67/00</b> , e.g. associations of moulding and joining techniques; Apparatus therefor	19953
B29C  69/02		ѤΤߤʤΡΣ	of moulding techniques only	5796
B29C  70/00		ʣʤ䶯ࡤŶढ뤤ͽʤʤץ饹å㡥ʪʲŪ¦̣ãȤУãʣˡΣ<br><br><b><ul></ul></b><br>Υ롼פǤϡѸɽϰʲ˼̣Ѥ롧Σ<br>䶯פȤϡݡåɡСҡġ뤤ϥ֥åʤɤη򤷤¤ʪʤζ٤ΤǤ롣Σ<br>ֽŶפȤϡγҡʴӡҡ뤤ϵʤɤη򤷤ŪԳʪǡʪʤʪŪ᤿ꡤ̤ꤹΤǤ롣Σ<br>ͽʡפȤϡǺʤ˵η˹礦褦˺Ƥꡤ䶯ȤƻȤʤΤǤ롣㡥ʪʤɽ̤ˤϤᤳޤ줿磻䡼ͥåȡΣ<br>ʪפȤϡʪʤȤ߹ޤ줿ͽʤΤȤǤ롣Σ	Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts; <br><br><b><u>Note(s)</u></b><br><br><ul><li>In this group, the following terms or expressions are used with the meanings indicated: <ul><li>"reinforcement" means a structure in the form of fibres, wires, rods, bars, sections, plates or blocks, which improves the strength of an article; </li><li>"filler" means a relatively inert substance in the form of particles, powder, beads, flakes or spheres, which improves the physical properties or increases the bulk or weight of an article; </li><li>"preformed part" means a part made of any material, being completely shaped to have a determined form and which is not used as a reinforcement, e.g. wires or nets forced only into the surface of an article; </li><li>"insert" means a preformed part incorporated in an article during moulding. </li></ul></li></ul>	5232
B29C  70/02		䶯ȽŶȤȤ߹ޤ줿Τǡذʾؤʤ󶯲ؤ뤤ŶؤΡ뤤ϤʤΡΣ	comprising combinations of reinforcements and fillers incorporated in matrix material, forming one or more layers, with or without non-reinforced or non-filled layers	2090
B29C  70/04		䶯ΤߤޤΡ㡥ʶץ饹åΣ	comprising reinforcements only, e.g. self-reinforcing plastics	601
B29C  70/06		ݾ䶯ΤߡΣ	Fibrous reinforcements only	11433
B29C  70/08		˰ۤʤ䶯बȤ߹蘆ƴޤޤ졤ذʾؤʤƤꡤ䶯ؤΡ뤤ϤʤΡΣ	comprising combinations of different forms of fibrous reinforcements incorporated in matrix material, forming one or more layers, with or without non-reinforced layers	3519
B29C  70/10		ݾ䶯ι¤ħΡΣ	characterised by the structure of fibrous reinforcements	2783
B29C  70/12		ûݤȤäΡ㡥ޥåȾΡΣ	using fibres of short length, e.g. in the form of a mat	1064
B29C  70/14		۸Σ	oriented	520
B29C  70/16		ĹΡ뤤Ϣ³ĹݤѤΡΣ	using fibres of substantial or continuous length	4907
B29C  70/18		ޥåȤηǡ㡥ȥ⡼ǥ󥰥ѥɡΣӣͣáϡΣ	in the form of a mat, e.g. sheet moulding compound [SMC]	534
B29C  70/20		켴۸㡥ӥ󥰡뤤¾ʿԤݡΣ	oriented in a single direction, e.g. roving or other parallel fibres	2140
B29C  70/22		ʤȤ۸󼡸¤ĤΡΣ	oriented in at least two directions forming a two-dimensional [2D] structure	1967
B29C  70/24		ʤȤ⻰۸ι¤ĤΡΣ	oriented in at least three directions forming a three-dimensional [3D] structure	1547
B29C  70/26		ݤ䶯ΤߡΣ	Non-fibrous reinforcements only	354
B29C  70/28		ΤΣ<br><br><b><ul></ul></b><br>ʣˤΥ롼פϰʲΤΤޤ롣<br>̩䶯䶯äƴ޿뤫ޤʤǻȤ뤤ϡ̩䶯䶯ϡ뤫ٻΤξ֤ƻȤ<br>ˤ䶯ؤΥץ饹åδ޿뤤Σ<br>ʣˤΥ롼פˤϰʲΤΤϴޤޤʤ<br>ûݤ䶯ޤ뤤Ϻ碌ץ饹åñȵѤˤǤäơñ쵻ѤʬवƤ<br>䶯ऽΤΤδ޿ȤäĤޤꡤ££Υ롼פʬवƤ䶯ȤϴطʤΡΣ	Shaping operations therefor; <br><br><b><u>Note(s)</u></b><br><br><ul><li>This group <u>covers</u>: <ul><li>the shaping of coherent fibrous reinforcements which are pre-impregnated or without binder, or of non-coherent reinforcements of fibres placed in a mould or on a support; </li><li>the impregnation or introduction of a plastics matrix in reinforcements during shaping. </li></ul></li><li>This group <u>does not cover</u>: <ul><li>the moulding by a single technique of plastics matrix material mixed with and containing reinforcing fibres of short length, which is covered by the appropriate place for that technique; </li><li>the pretreatment, e.g. impregnation, of reinforcements <u>per se</u>, i.e. independently of their shaping, which is covered by group <b>B29B15/08</b>. </li></ul></li></ul>	1078
B29C  70/30		쥤åˡ췿뤤ϥˡݤơסȤʤɤ򤢤Ƥˤˤץ졼åˡ췿뤤ϥˡݤ᤭ĤˤˤΣ	Shaping by lay-up, i.e. applying fibres, tape or broadsheet on a mould, former or core; Shaping by spray-up, i.e. spraying of fibres on a mould, former or core	6323
B29C  70/32		ž췿뤤ϥˡΣ	on a rotating mould, former or core	3303
B29C  70/34		Ӱ̤ˤޤϴ޿Σ	and shaping or impregnating by compression	10118
B29C  70/36		¤ˤ޿㡥¤Σ	and impregnating by casting, e.g. vacuum casting	1883
B29C  70/38		줿쥤åˡ㡥餫줿˹碌ƥܥåȤȤΣ	Automated lay-up, e.g. using robots, laying filaments according to predetermined patterns	3921
B29C  70/40		̤ˤ뤤ϴ޿ʣ£ãͥˡΣ	Shaping or impregnating by compression(<b>B29C70/34</b> takes precedence)	1260
B29C  70/42		ĹʪʡĤޤϢ³ʪʡ¤뤿ΡΣ	for producing articles of definite length, i.e. discrete articles	2561
B29C  70/44		ѤƤΡ㡥ϺˤХåˤȥ졼֤ˤޤĥˤΣ	using isostatic pressure, e.g. pressure difference-moulding, vacuum bag-moulding, autoclave-moulding or expanding rubber-moulding	5692
B29C  70/46		Ŭ礹뷿ѤΡ㡥ȥ⡼ǥ󥰥ѥɡΣӣͣáϤޤϥץץ쥰ʤɤѷ뤿ΡΣ	using matched moulds, e.g. for deforming sheet moulding compounds [SMC] or prepregs	4013
B29C  70/48		ĺˤ䶯޿롤㡥ȥ󥹥եΣңԣ͡ϡΣ	and impregnating the reinforcements in the closed mould, e.g. resin transfer moulding [RTM]	3820
B29C  70/50		Ĺʪʤ¤뤿Ρ㡥ץץ쥰ȥ⡼ǥ󥰥ѥɡΣӣͣáϤޤϥ⡼ǥ󥰥ѥɡΣأͣáϡΣ	for producing articles of indefinite length, e.g. prepregs, sheet moulding compounds [SMC] or cross moulding compounds [XMC]	3535
B29C  70/52		ȴĤޤϢ³ƥ̤ȤˤȰ̡Σ	Pultrusion, i.e. forming and compressing by continuously pulling through a die	5541
B29C  70/54		ʡޤ°ʡΣ	Component parts, details or accessories; Auxiliary operations	21186
B29C  70/56		뤤䶯ĹΣ	Tensioning reinforcements before or during shaping	890
B29C  70/58		ŶΤߤʤΣ<br><br><b><ul></ul></b><br>ñȤεѤˤ뽼Ŷ򺮤ץ饹åϡεѤ˳ʬह롣Σ	comprising fillers only; <br><br><b><u>Note(s)</u></b><br><br><ul><li>Moulding of plastics matrix material mixed with fillers by a single technique is classified in the appropriate place for that technique. </li></ul>	1067
B29C  70/60		ȰβưذʾؤʤۼνŶȹ礻ʤΡŶؤ̵ͭʤΣ	comprising a combination of distinct filler types incorporated in matrix material, forming one or more layers, and with or without non-filled layers	191
B29C  70/62		۸줿Ŷûѣ£ãˡΣ	the filler being oriented during moulding(for fibres of short length <b>B29C70/14</b>)	295
B29C  70/64		Ǻɽ̤˱ƶͿ뽼Ŷࡤ㡥ɽ̶᤯ǶŽ̤뤫뤤ϲðˤäɽ̤˹Τ뤳ȤˤΣ	the filler influencing the surface characteristics of the material, e.g. by concentrating near the surface or by incorporation into the surface by force	458
B29C  70/66		椬ƶˤʤäǤʤ뽼Ŷࡤ㡥󥿥ƥåեΣ	the filler comprising hollow constituents, e.g. syntactic foam	411
B29C  70/68		ͽʤξ˹Ρ뤤뤳Ȥˤ롤㡥ʪޤءΣ<br><br><b><ul></ul></b><br>Υ롼פˤϡʲΤΤϴޤޤʤ<br>ۤγʬवƤ褦ñεѤȤäͽʤȤιΡޤͽʤξؤ<br>ͽʤΤΤĤޤꡤ££Υ롼פʬवƤͽʤפȤϴطʤΡΣ	by incorporating or moulding on preformed parts, e.g. inserts or layers; <br><br><b><u>Note(s)</u></b><br><br><ul><li>This group <u>does not cover</u>: <ul><li>incorporating, or moulding on, preformed parts by a single technique, which is covered by the appropriate place for that technique; </li><li>pretreatment of preformed parts <u>per se</u>, i.e. independently of their shaping, which is covered by group <b>B29B15/00</b>. </li></ul></li></ul>	5525
B29C  70/70		ʪΣ	Completely encapsulating inserts	1485
B29C  70/72		񤵤ƤʤͽʪΤʪ㡥ŵʤüü뤤üʬΣ	Encapsulating inserts having non-encapsulated projections, e.g. extremities or terminal portions of electrical components	923
B29C  70/74		ͽʤŪʬ㡥ʡʣΣ	Moulding material on a relatively small portion of the preformed part, e.g. outsert moulding	1159
B29C  70/76		ͽʤαͽˤΣ	Moulding on edges or extremities of the preformed part	959
B29C  70/78		ͽʤ¦Σ	Moulding material on one side only of the preformed part	1320
B29C  70/80		Σ	Moulding sealing material into closure members	267
B29C  70/82		ʪʤɽ̤ΰޤؤΥ磻䡼ͥåȤʤɤβĤ㡥ǤȰˤΣ	Forcing wires, nets or the like partially or completely into the surface of an article, e.g. by cutting and pressing	426
B29C  70/84		Ȥ߹碌ͽʾΣ	Moulding material on preformed parts to be joined	1216
B29C  70/86		Žδ޿䶯ؤؤιΡΣ	Incorporating in coherent impregnated reinforcing layers	1908
B29C  70/88		ȤĤȤˤäħդ줿㡥ŵƳޤ϶Ū˶줿Σ	characterised primarily by possessing specific properties, e.g. electrically conductive or locally reinforced	2333
B29C  71/00		ʪʤηѤʤΤ֡ʣ£ã£ãͥ表ɽ£ãˡΣ	After-treatment of articles without altering their shape; Apparatus therefor(                <b>B29C44/56</b>, <b>B29C73/00</b> take precedence; surface shaping <b>B29C59/00</b>              )	6419
B29C  71/02		ǮˤΡΣ	Thermal after-treatment	5831
B29C  71/04		ưͥ륮ޤγȼͤˤΡΣ	by wave energy or particle radiation	3146
B29C  73/00		ץ饹åޤϲ֤ʪ줿ʪʤ佤㡥Υ֥饹ޤϥ֥饹£Ĥޤ뵻ѤѤޤ¤줿ʪʤ佤ʥΣ£ģɤޤϥۡˤϳʤ֣ƣ̣ˡΣ	Repairing of articles made from plastics or substances in a plastic state, e.g. of articles shaped or produced by using techniques covered by this subclass or subclass <b>B29D</b>(retreading tyres <b>B29D30/54</b>; devices for covering leaks in pipes or hoses <b>F16L55/16</b>)	1457
B29C  73/02		ΤޤϥڡȺѤΡʣ£ãͥˡΣ	using liquid or paste-like material(<b>B29C73/16</b> takes precedence)	2254
B29C  73/04		餫줿ѤΡΣ	using preformed elements	689
B29C  73/06		򥷡뤹Ѥ뤳ȤΡΣ	using plugs sealing in the hole	418
B29C  73/08		Τ֡㡥뤿ΤΡΣ	Apparatus therefor, e.g. for inserting	397
B29C  73/10		ʪʤɽ̤̩ѤΡʣ£ãͥˡΣ	using patches sealing on the surface of the article(<b>B29C73/14</b> takes precedence)	1287
B29C  73/12		Τ֡㡥Ƥ뤿ΤΡʣ£ãͥˡΣ	Apparatus therefor, e.g. for applying(<b>B29C73/30</b> takes precedence)	452
B29C  73/14		Ĥʤ礷Ƥʤʪʤγ¦̤֤ѤΣ	using elements composed of two parts joined together after having been placed one on each side of the article	95
B29C  73/16		ư佤ޤϼ̩֤⤷ϺޡΣ	Auto-repairing or self-sealing arrangements or agents	1358
B29C  73/18		ʪʤ̩ͭΡ㡥̤ˤΣ	the article material itself being self-sealing, e.g. by compression	298
B29C  73/20		ʪʤΰʬѷǽ̩ʤΡΣ	the article material only consisting in part of a deformable sealing material	261
B29C  73/22		ʪ㡥ʪʤ»ȤФʴޤͭʪʡΣ	the article containing elements including a sealing composition, e.g. powder being liberated when the article is damaged	478
B29C  73/24		¾ʬवʤ֤ޤ°֡Σ	Apparatus or accessories not otherwise provided for	1320
B29C  73/26		ŪΤΤΡΣ	for mechanical pretreatment	736
B29C  73/28		ʺ᤿ФΤΡ㡥ɡΣ	for clamping and stretching flexible material, e.g. inner tubes	112
B29C  73/30		Ṳ̄ޤ϶ŪǮΤΤΡΣ	for local pressing or local heating	632
B29C  73/32		ΤѤΡ㡥ĥǽޡΣ	using an elastic element, e.g. inflatable bag	169
B29C  73/34		ŪǮΤΤΡΣ	for local heating	750
