G06C   1/00		׻ʤȤɽˤľ׻㡥Х󡤥ݥåȲû	Computing aids in which the computing members form at least part of the displayed result and are manipulated directly by hand, e.g. abacuses or pocket adding devices	2709
G06C   3/00		ɽΤι㡥ḫɽ	Arrangements for table look-up, e.g. menstruation table	3428
G06C   5/00		ưǽʤʬ	Non-functional elements	78
G06C   5/02		ϥ󥰡	Housings; Frameworks	151
G06C   7/00		ϵΣ	Input mechanisms	197
G06C   7/02		ܡ	Keyboards	375
G06C   7/04		ߵ㡥ߴ֤ηߡΣ	Interlocking devices, e.g. between keys	91
G06C   7/06		ơηФ飱ޤǤʤɤΥΣåȤ򤽤줾äƤΡʥե륭	with one set of keys for each denomination	255
G06C   7/08		Ф飱ޤǤʤɤΥ򣱥åȤäƤʤΡ㡥ƥ󥭡ܡɡʣȤοޤϥƥ󥭡	with one set of keys for all denominations, e.g. ten-key board	267
G06C   7/09		ϿôΤη׻ؤΥǡžΣ	Transfer of data from record carrier to computing mechanisms	21
G06C   7/10		ž㡥ƥ󥭡ܡɤԥ󥭥ꥸؤֿž	Transfer mechanisms, e.g. transfer of a figure from a ten-key keyboard into the pin carriage	480
G06C   7/12		֡㡥ܡɤε	Resetting devices, e.g. for the keyboard	29
G06C   9/00		ž㡥ϵ׻ؿž뵡ʣǣãǣãǣãͥ	Transfer mechanisms, e.g. for transmitting figures from the input mechanism into the computing mechanism(<b>G06C7/10</b>, <b>G06C11/00</b>, <b>G06C15/00</b> take precedence)	96
G06C   9/02		㡥쥸ѤƤͤ򵡹뵡	Back-transfer arrangements, e.g. to transfer a value accumulated in a register back into the selection mechanism	2
G06C  11/00		ϵΣ	Output mechanisms	432
G06C  11/02		ĻɽĤΡ㡥	with visual indication, e.g. counter drum	563
G06C  11/04		ĤΡ㡥ˣʸޤϰˣԤ	with printing mechanisms, e.g. for character-at-a-time or line-at-a-time printing	542
G06C  11/06		ץϥޡΤ	having type hammers	34
G06C  11/08		󹦵Ĥ	with punching mechanism	170
G06C  11/10		ɤޤϴ椢뤤ϥơפ֡㡥֡ԥڡΣ	Arrangements for feeding single sheets or continuous web or tape, e.g. ejection device; Line-spacing devices	126
G06C  11/12		ơΤΤ	for feeding tape	74
G06C  13/00		ʺǲ̤ΤߤϤä뵡׿ǣͣˡΣ	Storage mechanisms (mechanical counters with input only to the lowest order <b>G06M1/04</b>)	74
G06C  13/02		黻ε㡥ԥ󥭥ꥸϵǣã	Operand stores, e.g. pin carriage(input mechanisms <b>G06C7/00</b>)	6
G06C  13/04		ѥХåե	Print buffer stores	3
G06C  15/00		׻׻κư֡Σ	Computing mechanisms; Actuating devices therefor	530
G06C  15/02		ˡǱ黻<br><br><b><ul></ul></b><br>롼ףϡ롼ף飱ͥ褹롣	operating on the binary scale	30
G06C  15/04		ûޤϸ֡ʣǣãͥ	Adding or subtracting devices(<b>G06C15/08</b> takes precedence)	161
G06C  15/06		Х󥹹֤ĤΡֹפԤʤ	having balance totalising; Obtaining sub-total	110
G06C  15/08		軻ޤϽ֡٤ޤϤ٤η׻	Multiplying or dividing devices; Devices for computing the exponent or root	109
G06C  15/10		׻ľ룱Ф륭åȤ򣲼ʾĤ	having more than one denominational set of keys operating directly on computing mechanism	9
G06C  15/12		ԥ󥭥ꥸΤ	having pin carriage	23
G06C  15/14		˻֤ΤΡ㡥ɡʼ	having pin wheel, e.g. Odhner type	21
G06C  15/16		ջַ׻ΤΡ㡥ȡޥ	having stepped-toothed actuating drums, e.g. Thomas type	15
G06C  15/18		ʬѤ뤿ξ軻ɽĤ	having multiplication table for forming partial products	12
G06C  15/20		硼ȥåȾ軻ޤϽŬƤΡΣ	adapted for short-cut multiplication or division	22
G06C  15/22		İʾη׻֤ȹ礻Τ֡İʾη׻ʬ䤹뤿֡㡥ʬۤ뤿Τ	Arrangements for two or more computing devices; Arrangements for subdivision into two or more computing mechanisms, e.g. splitting	11
G06C  15/24		ޤϾ軻ư֡Σ	Devices for counting the cycles of operation in division or multiplication	23
G06C  15/26		֤η֡㡥ʷ	Devices for transfer between orders, e.g. tens-transfer device	90
G06C  15/28		ʳǷ꤬Ԥʤ	where transfer is effected in one step	7
G06C  15/30		ʳǷ꤬Ԥʤ	where transfer is effected in two steps	8
G06C  15/32		Ƥ˷ꤹ֤Ĥ	with provision for simultaneous transfer between all orders	2
G06C  15/34		꤬ͷ֤ˤԤʤ硤ʤ뼰	where transfer is effected by planet gear, i.e. crawl type	6
G06C  15/36		֤Ĥ	with aligning means	2
G06C  15/38		˻ּ׻ˤ	for pin-wheel computing mechanisms	113
G06C  15/40		ջַ׻ˤ	for stepped-toothed-drum computing mechanism	17
G06C  15/42		ޤ¾δ˥ꥻåȤ	Devices for resetting to zero or other datum	31
G06C  15/44		֡㡥θ	Devices for comparing numerical values, e.g. zero check	6
G06C  15/46		ݤ	Arrangements for rounding-off	1
G06C  15/48		ʣĤη׻쥸ΤΣĤ򤹤֡ʹܷ׿֣ǣãˡΣ	Arrangements for selection of one out of several counting registers  (item-counting devices <b>G06C25/02</b>)	11
G06C  17/00		뵭¾Ѵ롤ʤѴ	Mechanisms for converting from one notational system to another, i.e. radix conversion	34
G06C  19/00		굡ˡǤʤФƱͤʵ	Decimal-point mechanisms; Analogous mechanisms for non-decimal notations	16
G06C  19/02		ɽ	Devices for indicating the point	51
G06C  19/04			Devices for printing the point	88
G06C  21/00		׻ˤ׻ιԤʤꤹץߥ󥰵㡥ĤޤϿĤΥ줿ʲûη֤ˤñ˾軻򤹤뵡ǣã	Programming-mechanisms for determining the steps to be performed by the computing machine, e.g. when a key or certain keys are depressed(mechanisms merely for producing multiplication by repeated addition <b>G06C15/08</b>)	98
G06C  21/02		åΰ֤ˤץߥ󥰵ưꤵ	in which the operation of the mechanism is determined by the position of the carriage	93
G06C  21/04		³ưǽ椹뤿ξդ֡㡥ե󥯥󥭡ˤäƺư줫ĥ쥸ξ֤˰¸֡ʣĤη׻쥸ΤΣĤ򤹤֣ǣã	Conditional arrangements for controlling subsequent operating functions, e.g. control arrangement triggered by a function key and depending on the condition of the register(arrangements for selection of one out of several counting registers <b>G06C15/48</b>)	233
G06C  23/00		ǽǤζư<br><br><b><ul></ul></b><br>롼ףϡ롼ף飲ͥ褹롣	Driving mechanisms for functional elements	64
G06C  23/02		缴ư	of main shaft	157
G06C  23/04		ԥ󥭥ꥸư֡㡥ԥ󥭥ꥸʤ뵡	of pin carriage, e.g. for step-by-step movement	95
G06C  23/06		ɽ֤ζư㡥ꥸΥå׵	of tabulation devices, e.g. of carriage skip	176
G06C  23/08		ΤޤϵΤˤư	Hydraulic or pneumatic actuation	
G06C  25/00		ǽ֡㡥ߵʥܡɤηߵǣãˡΣ	Auxiliary functional arrangements, e.g. interlocks(interlocks in keyboards <b>G06C7/04</b>)	165
G06C  25/02		ܷ׿֡ʽޤϾ軻ư֣ǣã	Item-counting devices(devices for counting the cycles of operation in division or multiplication <b>G06C15/24</b>)	34
G06C  27/00		ƵǽʬεŪϢŪطħķ׻㡥	Computing machines characterised by the structural interrelation of their functional units, e.g. invoicing machines	488
G06C  29/00		׻¾ε㡥ץ饤Ȥη	Combinations of computing machines with other machines, e.g. with typewriter, with money-changing apparatus	216
